Search Results

Search found 10812 results on 433 pages for 'boot partition'.

Page 327/433 | < Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >

• How do I SCP/FTP to a Coraid SR2421

  - by Pitto

  I need to save data to a Coraid SR2421. I am no expert and I'm trying to understand how this costy piece of hardware works. All I have is a Ethernet cable connecting my laptop and the coraid to a switch and the coraid's console with cursor blinking. Any kind of help would be greatly appreciated. edit and further explanation: I've tried using software on the coraid website but It's not working. So I've contacted the support and they sent me a file to upload on the coraid. It looks like if I upgrade coraid's firmware then I'll be able to use the coraid software on the windows side. That's why I'd need SCP/FTP or any kind of solution to copy a file in the partition that can be read from coraid console command line so I can launch the update command as requested. I hope I was a bit clearer now.

  Read the article

• Alerting when a RAID Array disk fails locally on VMWare ESX or ESXi System

  - by Tim K

  With ESX and ESXi, we recently had two systems where that the boot partition became degraded due to a failed disk. The only alert we managed to capture was the visual alert on the Dell servers. We failed to received any electronic alerts regarding the failed or degraded array. Does anyone have any experience with monitoring for these types of failures? In both cases, the servers were running in a RAID 5 SCSI configuration (5 disks on one system, 3 disks on another) which if we were running a Windows Server OS, we would have had an alert created in the Eventviewer. Where would I begin to look for this solution. Can it be configured in VCenter or vFoglight?

  Read the article

• Video converters don't work anymore after reinstalling Windows

  - by tassiekev

  A few days ago, I decided to reinstall Windows 7 as my HD partition seemed to be nearly full and things were slowing down. I'd been using Handbrake almost exclusively to convert TV recordings and used Freemake on occasion. Following the reinstall, I can't get either to work: Handbrake says it's encoding for about 2 seconds and then says it's finished, but there are no converted files of any size. Freemake just says 'Conversion Error' and won't go any further. As an experiment I tried two programs that I don't normally use, VideoReDo & Any Video Converter. Both worked fine. Anyone got any clues?

  Read the article

• fsck: FILE SYSTEM WAS MODIFIED after each check with -c, why?

  - by Chris

  I use a script to partition and format CF cards (connected with a USB card writer) in an automated way. After the main process I check the card again with fsck. To check bad blocks I also tried the '-c' switch, but I always get a return value != 0 and the message "FILE SYSTEM WAS MODIFIED" (see below). I get the same result when checking the very same drive several times... Does anyone know why a) the file system is modified at all and b) why this seems to happen every time I check and not only in case of an error (like bad blocks)? Here's the output: linux-box# fsck.ext3 -c /dev/sdx1 e2fsck 1.40.2 (12-Jul-2007) Checking for bad blocks (read-only test): done Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information Volume (/dev/sdx1): ***** FILE SYSTEM WAS MODIFIED ***** Volume (/dev/sdx1): 5132/245760 files (1.2% non-contiguous), 178910/1959896 blocks

  Read the article

• Moving data to lower sectors on an SSD without defragging

  - by David Freitag

  I bought an Intel SSD drive a while back and now I want to dual-boot with it. But for some reason there are sectors near the end of the drive filled and I can’t seem to find a way to remove the data so that I can safely shrink the partition. I know I have sectors near the end full because I am using Defraggler to analyze my drive (not to defrag it). I can see what files need to be moved/deleted but short of actually deleting some drivers and/or other necessary files, I am completely stuck. This the diskmap: I am only able to shave off that last 1.72GB of space from the drive which isn’t even enough for the most minimal Linux install.

  Read the article

• UBUNTU.. GRUB problem

  - by pravinp

  Hi, I have/(had) windows xp on one partition of my hdd. on second i installed ubuntu 9.10 yesterday. and after reboot of windows xp i get error "GRUB LOADING.". now i know that you can play around with that using live GRUB and all. putting GRUB on top of MBR or etc etc. something like that. i want to know - if i reinstall Ubuntu 10.04 which is available now - will it give me still the same error? or i will be able to use both OS? (i.e. is that problem solved in version 10.04 or still there? and if it is solved reinstallation of ubuntu will solve the problem or not?) anyhelp is welcome. Thanks

  Read the article

• My 4 GB microSD card only allows me to use 1 GB

  - by James Litewski

  My phone came with a 4 GB microSD card. On the card it lists that 3 GB goes to Muve Music which is Cricket's music program, and I get 1 GB... Well, I don't pay for Muve Music, so why waste the space? I thought I'd be able to simply buy an adapter and reformat the microSD card to get the full 4 GB; but that wasn't the case... I could only find the 1 GB partition on the card. I even tried reformatting the disk, but I had no luck. How can I get the full 4 GB? BTW, I'm running Mac OS X v10.7 (Lion).

  Read the article

• My WD passport detected but not shown on my computer

  - by Rakesh Patel

  1TB WD harddisk is detected in laptop but drives not visible on my computer. Under disk managment drives shown without letters. Right clicking on these drives give 2 options: Delete volume Help. The same harddisk was running well on the same laptop a day before. It is also showing full size of hard drives, Healthy (Primary Partition) etc. (this happened after harddisk usage by guest). Harddisk is new only (about 5 month usage) Please suggest: Is there hardware related problem inside harddisk, if so is it repairable? Is there any option to recover data?

  Read the article

• btrfs won't run from cron

  - by Mikkel

  I'm trying to set up a cron job to create a btrfs subvolume snapshot of my root partition. The command works perfectly if I run it from the command line, but nothing happens at the scheduled cron time. I've tried piping to logger and redirecting stdout/stderr to file, and not only is there no content, the file I'm logging to isn't even created. The cron command I have is as follows: 0 0 * * * /sbin/btrfs subvolume snapshot / "/snapshots/$(date +%Y-%m-%d)" I've tried prefixing it with /bin/bash, but that makes no difference. What am I missing?

  Read the article

• Get error (Repair Filesystem) 1 # when I install 4 new Hard drives in RedHat Linux 5 on a Dell PowerEdge 2900

  - by Alos Diallo

  Hi I am using a Dell PowerEdge 2900 running RedHat 5. I had 4 drives in the system using a Raid 5, I purchased and installed 4 more drives keeping the configuration the same. Set up the Vertual disks in PERC 6/i. When I exit out and reboot the system I get the following: fsck.ext3: No such file or dirrectory while trying open /dev/ddb1 [FAILED] ***An error occurred during the file system check. ***Dropping you to a shell; the system will reboot ***when you leave the shell. Then am prompted for the root pw. I enter it and am then prompted with: (Repair filesystem) 1# if I type fdisk -l I get some info on the disk along with: Disk /dev/sdb doesn't contain a valid partition table I am then prompted for (Repair filesystem) 2# If I reboot I am taken to the same screen again. The system was working before this happened. Does anyone know why this is happening and or what I can do to fix it? Thanks

  Read the article

• XP can't read data from transferred HD

  - by Alexander Miller

  Computer A, running XP, died. XP was installed on a fresh HD in computer B. Slaved data-backup HD from A was installed as slave on B. B will not read it; shows only 2 folders, Recycler and System Volume Info. All of these are older machines with IDE drives. What's going on & how can I read/transfer the data from the transferred drive? This was only a trial run. Actually I will need to transfer the master HD from A - which has XP on it - and read from its data partition because (blush) the backup drive was not up to date.

  Read the article

• Deleting Time Machine in Mac OS X 10.6.4

  - by cappuccino

  Does anyone know how to delete Time Machine in Mac OS X 10.6.4? Before answering: sudo rm -rf /whateverthetimemachineis does not work Disabling the ACL permissions first with sudo fsaclctl -p /whatever -d does not work, sudo: fsaclctl: command not found Use the delete all backup feature in Time Machine... this is slow as hell, would take days. Need a command line solution. No I don't want to reformat the drive, I have other content on it, and no don't say I should have separated on two partition or two drives, I did it this say since partitions cannot be dynamically changed, and two drives is annoying since, whats the point of having a big drive?... plus has no relation to the issue at hand. Already googlied for hours and read everything on Super User, nothing working. and all solutions are the first 4. Any clues?

  Read the article

• Sorting out mSSD acceleration on a Acer M3-581TG

  - by PhonicUK

  I recently purchased a Acer Timeline M3 Ultra, it ships with a 500GB HDD and a 20GB mSSD to use as a cache. First thing I did when I got it was format the drives and install a clean OS (on the HDD, the mSSD has nothing on it) - but now I can't figure out how everything needs to be configured in order to use the mSSD as a cache, it just looks like a standard storage drive. I've poked around in the BIOS and there is a SATA mode setting, but it only has one option (AHCI), most of the documentation I've seen on the subject says that the SATA controller needs to be in RAID mode otherwise 'Acceleration' isn't visible in the Intel SRT menu (which for me, it isn't) I've seen a few things that suggest I just need the correct partition layout, I tried this using fdisk from a Linux LiveCD but got nowhere. Any ideas? The laptop shipped with no recovery media so I'm marginally stumped. I don't have any issue with reformatting again if required.

  Read the article

• Resize PV on LVM

  - by Paul Tarjan

  I have this: Device Boot Start End Blocks Id System /dev/sda1 * 1 1217 9775552 83 Linux /dev/sda2 1218 60801 478608480 83 Linux And I'd like to shrink sda2 by about 10 Gigs to give some more space to sda1. sda2 is a PV on an LVM, but there is some free space in the VG so I don't have to worry about filesystem shrinking. How can I tell my LVM to move the data off of the first 10 gigs of sda2 and then redo my partition table to give it to sda1? (I don't have enough free space to just pvremove sda2, which would be the easy solution).

  Read the article

• ExtX file system on my usb key

  - by yves Baumes

  Hi all, if I format my usb key with an extX file system, copy some files on it and then give it to a friend for him to add files or modify existing one on this key, then he is rejected by its own system. Because its User ID (UID) nor GID are the same as mine on my machine. How to get rid of this limitation? Is it possible to disable user rights on a ext2/ext3 partition? Of course, I would really like not to rely on any other file system.

  Read the article

• Why doesn't Spotlight find Applications on OS X Server?

  - by Clinton Blackmore

  On our Mac OS X Server 10.5.x boxes, using spotlight (ie. the magnifying glass in the top corner) does not find applications and utilities, but it does on Mac OS X client (and so, we all use the keyboard shortcut and end up frustrated -- it either gives us nothing, or, without us realizing it until later, an application from another partition.) It isn't clear to me if we've done something strange setting up our servers, but they are all like this. Any idea what caused it and how we fix it? Everything (including Applications) are set to show up in a spotlight search in System Preferences).

  Read the article

• Ubuntu: One or more of the mounts listed in fstab cannot ye be mounted

  - by Phuong Nguyen

  I was enjoying a Movie when my Ubuntu suddenly hung. At the next reboot, here is the message: One or more of the mounts listed in /etc/fstab cannot yet be mounted: /home: waiting for /dev/disk/by-uuid/.... Press ESC to enter a recovery shell. Problems: When I enter recovery shell, I don't know that to do. If I press Ctrl+D, then the message above will reappear. What should I do? I checked with Ubuntu Live CD and my partition looks OK.

  Read the article

• RHEL raw device (over VMware RDM) performance issues

  - by jifa

  I'm running RHEL 5.3 over vSphere 4.0U1. I configured multiple LUNs on my NetApp (Fibre) storage, and added the RDM on two (Linux) VMs, using the Paravirtual SCSI adapter. One LUN is 100GB in size, successfully mapped to /dev/sdb on both VMs, 5 more are 500MB in size (mapped to /dev/sd{c-g}. I also created one partition per device. I have encountered two issues: First, writing directly to /dev/sdb1 gives me ~50MB/s, while any of the /dev/sd{c-g}1 gives me ~9MB/s. There is no difference in configuration of the LUNs apart from their size. I am wondering what causes this but this is not my main problem, as I would settle for 9 MB/s. I created raw devices using udev pretty straightforwardly: ACTION=="add", KERNEL=="sdb1", RUN+="/bin/raw /dev/raw/raw1 %N" per device Writing to any of the new raw devices dramatically slows down performance to just over 900KB/s. Can anyone point me in a helpful direction? Thanks in advance, -- jifa

  Read the article

• How to efficiently dump a huge MySQL innodb database?

  - by Jagbir

  I got an Ubuntu 10.04 production MySQL database server where total size of database is 260 GB while size of root partition is itself 300 GB where DB is stored, essentially means around 96% of / is full and there's no space left for storing dump/backup etc. No other disk is attached to server as of now. My task is to migrate this database to other server sitting in different datacenter. Question is how to do that efficiently with minimum downtime? I'm thinking in line of: Request to attach an extra drive to server and take a dump in that drive. Transfer dump to new server, restore it and make new server slave of existing one to keep data in sync When migration is needed, break replication, update slave config to accept read/write requests and make old server read-only so it won't entertain any write requests and tell app developers to update there config with new IP address for db. What's your suggestions to improve this or any alternate better approach for this task?

  Read the article

• Booting from virtual machine VMWAre

  - by vikp

  Hi, I have a VMWare virtual machine (windows xp). I have just started it up through the VMWare player and it's extremely slow on my laptop (expected). Is it possible to boot from that image like in mac bootcamp so that it's not virtualised and soo slow? Thank you

  Read the article

• Linux kernel startup problems: how to analyze?

  - by java.is.for.desktop

  Hello, everyone! After manually updating the kernel from 2.6.33 to 2.6.34 on my OpenSuse 11.2 Notebook, it stops after the message Loading drivers, configuring devices... This stop can be interrupted with Ctrl-C, but when the system enters runlevel 5, no partitions are mounted (but the root partition), many services fail to start, and other strange things are going on. No X11. NOTE: I manually updated the kernel many times before, it worked. Yes, I know, in case of NVidia, the driver has to be recompiled. The question is: How can I analyze the cause of the problem? Doing dmesg gives me soooo much output, I can't "map" it to the output which I see at startup. The output does not contain the string Loading drivers, configuring devices, or similar.

  Read the article

• How to dual OS 32-bit/64-bit Windows 7 Ultimate.

  - by Cyril Horad

  I have a problem with regards to my nVidia driver not running on 64-bit. I decided to install both 32-bit and 64-bit on my ASUS K42JC (4GB RAM upgrade) in order to function the nVidia on the 32-bit. My question is, how could I make my laptop run on either 32-bit or 64-bit OS. What options I am suppose to use, a single, double, or triple partition? From an answer: Well. When I installed the nVidia driver from either the ASUS site and the prescribed driver from NVIDA site via System Requirements Lab, both ended up freezing my laptop to the point when the desktop is about the finish booting. I have tried three(3) times reformatting and trying to fix the problem. Yet no use. I filed a ticket to the Asus support but for now no replies yet. But this bothers me, why wouldn't the nVidia run on 64bit yet it runs perfectly on 32bit.

  Read the article

• clean reinstall of windows on dell xps 1530 using bundled software from dell?

  - by kacalapy

  i wanted to delete my laptop hard drive and reinstall the os that came on the media with the laptop originally. i booted from the windows disk and reinstalled windows but this did not delete my hard drive and even worse it made a windows.old folder with all my old junk on my c drive how do i get a clean/ deleted c drive with new install of my os? i have a small 120 Gig solid state hard drive with just one partition. i would like to create two partitions on the new install. my main issue is not being able to get a clean install such that the result is a pure windows laptop with no junk files that have accumulated over time. please advise.

  Read the article

• clean reinstall of windows on dell xps 1530 using bundled software from dell?

  - by kacalapy

  i wanted to delete my laptop hard drive and reinstall the os that came on the media with the laptop originally. i booted from the windows disk and reinstalled windows but this did not delete my hard drive and even worse it made a windows.old folder with all my old junk on my c drive how do i get a clean/ deleted c drive with new install of my os? i have a small 120 Gig solid state hard drive with just one partition. i would like to create two partitions on the new install. my main issue is not being able to get a clean install such that the result is a pure windows laptop with no junk files that have accumulated over time. please advise.

  Read the article

• How to reinstall OS X 10.8 without internet?

  - by Sam

  I had a crash on my Macbook Air MD231 - Mid 2012, and my system won't boot, and unfortunately my friend erase my partition from disk utility. Now I have three question 1)my internet speed is very low, for re-installing I have to download all of the OS X 10.8 from internet? or I can download it and install it via USB port?(how??) 2)I have to select this option ? "re-install OS X" , and what about size of that? (for example 4.2 Gb) 3)after installing , is there anyway to restore my dada? unfortunately I have not any backup right now, after I turning my Mac on, it's automatically going to repair mode... thnx for your kind

  Read the article

< Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >