Search Results

Search found 9596 results on 384 pages for 'remote assistance'.

Page 327/384 | < Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >

• IPSec tunnelling with ISA Server 2000...

  - by Izhido

  Believe it or not, our corporate network still uses ISA Server 2000 (in a Windows Server 2003 machine) to enable / control Internet access to / from it. I was asked recently to configure that ISA Server to create a site-to-site VPN for a new branch in a office about 25 km. away from it. The idea is basically to enable not only computers, but also Palm devices (WiFi-enabled, of course), to be able to see other computers in both sites. I was also told that a simple VPN-enabled wireless AP/router (in this case, a Cisco WRV210 unit) should be enough to establish communications with the main office. To be fair, the router looks easy to configure; it was confusing at first, but further understanding of how site-to-site VPNs work cleared all doubts about it. Now I need to make modifications to our ISA Server in order to recognize the newly installed & configured "remote" VPN site. Thing is, either my Googling skills are pathethically horrible, or there doesn't seem to be much (or any, at all) information about how to configure an ISA Server 2000 for this purpose. Lots of stuff on 2004, of course; also, I think I saw something for 2006. But nothing I could find about 2000. Reading about 2004, it seems that the only way I can do site-on-site with a Cisco router (read: a non-ISA-Server machine) is through something they call a "IPSec tunnel". Fair enough. However, I can't figure for the life of me how could I even start to find, leave alone configure, such a thing. Do you, people, happen to know how to do IPSec tunelling on a ISA Server 2000, so I can connect to a Cisco WRV210 VPN-enabled router, and build a site-to-site VPN for both networks? Or is this not possible at all? (Meaning I should change anything in this configuration to make it work...)

  Read the article

• How to detect/list rogue computers connected to a WIFI network without access to the Wifi Router interface?

  - by JJarava

  This is what I believe to be an interesting challenge :) A relative (that leaves a bit too far to go there in person) is complaining that their WIFI/Internet network performance has gone down abysmally lately. She'd like to know if some of the neighbors are using her wifi network to access the internet but she's not too technically savvy. I know that the best way to prevent issues would be to change the Router password, but it's a bit of a PITA having to re-configure all wifi devices... and if the uninvited guest broke the password once, they can do it again... Her wifi router/internet connection is provided by the telco, and remotely managed so she can log-on to their telco account's page and remotely change the router's Wifi password, but doesn't have access to the router status page/config/etc unless she opts out of the telco's remote support and mainteinance service... So, how could she check if there are guests in the wifi with this restrictions and in the most "point and click way"? In this case I'd probably use nmap to look for other devices in the network, but I'm not sure if that's the easiest way to do it. I'm not a wifi expert, so I don't know if there are any wifi-scanning utils that can tell us who's talking to the router... Lastly, she's a Windows user as I guess that'll influence the choice of tools available Any suggestions more than welcome Regards!

  Read the article

• Hosting a server for websites, ftp and random use at home?

  - by Zolomon

  I'm wondering what's the best option for me if I want to move all my hosted websites (from a hosting company) to a server at my own home? Basically, the needs I have are: be able to host websites using PHP/ASP.NET (haven't really decided yet - both would be preferred!) enable FTP so I can create accounts for my family members to access the server for file handling SSH SSL - for secure connections (this is something you have to buy/apply for per domain, not sure if there are any server side settings that have to be made) be able to stream video remote desktop host home-brew applications that can run as services use either MySQl/SQLite/SQL for relational database storage What should I think of before I buy a server? What hardware will I need, what will limit my server? I basically want to learn networking better as I'm a software and web developer but haven't had the resources to acquire any serious toys until now. At the time of writing, most of my websites have 60 visits/day so I don't suspect them to be very demanding. Is there something I haven't thought of that I should have? What OS would you suggest I run? FreeBSD vs Windows Server vs ?

  Read the article

• How do I secure Sql Server 2008 R2

  - by Mark Tait

  I have both a dedicated and a VPS (from Fasthosts) virtual server - the web sites/applications I run on these, access Sql Server stored on the same web server. Until now, I have logged onto Sql Server on both the deidicated and VPS server, from Sql Server Management Studio - until I noticed in my server application logs, multiple attempts to logon to Sql Server using the 'sa' username, but failed password. So someone/bot is trying hard (repeatedly every couple of hours, for approx 20 attempts during each instance) to log on... so obviously I have to lock down access to Sql Sever remotely. What I have done is gone into Configuration Manager, and in Sql Server Network Configuration - Protocols for Sql2008 and also in Sql Native Client 10.0 Configuration - Client Protocols - I have diabled Named Pipes, TCP/IP (and VIA by default). I have left Shared Memory enabled. I also disabled in Sql Server Services, the Sql Server Browser. Now the only way I can manage the databases on these servers, is by logging on to them via Remote Desktop. Can anyone confirm if this is the correct way of stopping anyone maliciously logging on to Sql Server? (I'm not a DBA or security expert - and there are hundreds of articles advising all different ways - but I was hoping for the experts here to confirm, or otherwise, if what I've done is correct) Thank you, Mark

  Read the article

• Windows 2012 RDS Temporary profile for Administrator

  - by Fabio

  I've configured a Windows 2012 RDS Farm with two virtual servers (VMWare - each one on a different ESX server). Both servers have Licensing, Web Access, Gateway, Connection Broker and Session Host roles. High Availability is set up and it works fine. Remote Apps are working and even Windows XP clients have access to the web interface. User profile path is \vmfiles1\UserProfileDisks\App\ and almost everyone has full right access to it. The problem I have is that I would like to be able to access both servers at the same time with the Administrator account (console), but each time I try, the second server that I logon to give me access with a temporary profile. I tried to enable/disable multiple sessions per user and forced Admin logoff with the GPO but nothing changed. Another thing is that the server pool is not saved, so each time I restart the RDS server or I logoff from it, I have to add a server in the server manager. Do you have any idea? Sorry if my english is not perfect.

  Read the article

• Routing subnet over GRE tunnel

  - by eMgz

  Hi, Im trying to configure a GRE over IPSec connection between two subnets. The IPSec tunnel is opened and now I want to add a GRE tunnel over it: ip tunnel add GRE01 mode gre remote 10.244.0.1 local 10.244.245.32 ttl 255 ip link set GRE01 up ip addr add 10.244.248.126 dev GRE01 ip route add 10.244.248.125 dev GRE01 Now I have an interface GRE01 (ifconfig): GRE10 Link encap:UNSPEC HWaddr <h_addr> inet addr:10.244.248.126 P-t-P:10.244.248.126 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MTU:1476 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) And the following routes (ip route list): 10.244.248.125 dev GRE10 scope link <pub_subnet> dev eth0 proto kernel scope link src <pub_ip> default via <pub_gw> dev eth0 metric 100 As a last step, I need now to route my subnet over the tunnel: ip route add 10.245.1.224/28 10.244.248.125 However, I am getting the error Error: either "to" is duplicate, or "10.244.248.125" is a garbage. So, what I didn't understand is why I can't route my subnet over the tunnel, once the only route I have there says that it should route the tunnel IP over the GRE01 interface. Any hint? Thanks.

  Read the article

• Win 2003 SBS - secure enough by default?

  - by Pekka

  I have to set up a Windows 2003 Small Business Server to work as a Subversion repository and possibly as an E-Mail server later. The machine is a virtual one, hosted with a hosting company, and freshly initialized. I used the Security Configuration Wizard to deactivate all server roles. After I install Subversion, I will open the necessary ports for the service; in addition, obviously, RDP will stay open so I can remote control the machine. Automatic updates are activated, and I will set up E-Mail notification every time somebody logs on to the server. I'm a programmer and not a professional systems administrator, so I would like to know whether you would regard this a sane and secure setup for a (publicly available) box to host sensitive code and/or E-Mail on. Is there anything in addition I should do to make the machine secure? Is there anything I can do on a long-term basis to keep the machine secure, apart from monitoring the event log (as far as I can make sense out of it), and seeing that any hotfixes are installed properly?

  Read the article

• PTR record not valid for all domains

  - by charnley

  We have an issue sending emails to certain domains, namely Time Warner and Cox. Last week, we decommissioned our Exchange 2003 server and now our Exchange 2010 server is doing all of the transport for our domain. We run our own authoritative name servers, so we are in charge of the DNS and have modified our PTR record to reflect the new server. All mailflow is working except for these 2 domains. When I telnet on port 25 to the mail servers for Cox and Time Warner I am receiving errors. For Cox the error is: 554... rejected - no rDNS And when I telnet to port 25 to the Time Warner mail server we get this: 554 5.7.1 - Connection refused. IP name lookup failed for x.x.x.x I have run through the outbound SMTP test on Microsoft Remote Connectivity Analyzer and get 100% completely successful results. MXToolbox comes up with all successful tests on SMTP as well, showing correct reverse banner check, and no blacklisting. DNSQueries.com shows a valid reverse DNS entry as well for us. Outbound emails to these 2 domains continue to sit in the queue. Any ideas or advice would be greatly appreciated. Thanks!

  Read the article

• 2 subnets off of 1 PC with 2 NICs

  - by Jeff

  I have a general setup I'd like to do with some IP cameras. This seems like it will work but I think I may be missing something. Our system consists of a video recorder PC connected to a switch which is connected to a number of IP cameras. I'd like to connect this system into an existing network but I want it on a different subnet. The main reason is that the cameras use a lot of bandwidth that I don't want slowing down the existing network. My idea was to install 2 NICs on the video recorder pc. 1 NIC connects to the existing network on 192.169.1.x for example, and the other NIC connect to the switch with the cameras. This NIC would be 192.168.100.x. Then we could remote to the video recorder PC with a GoToMyPC type thing for administration via the existing network. I've included a diagram of how I see this working but I'm a little fuzzy on the setup of the NICs (if this can work at all). My problem may be trying to deal with 2 subnets without a router but It really doesn't seem like it's necessary in this situation. BTW, gliffy is cool.

  Read the article

• TCP Handshake and port numbers

  - by Guido

  (I have a question about the TCP handshake and how port numbers are assigned, if this does not belong here, let me know.) Hi, I'm studying TCP/IP from the book "Internetworking with TCP/IP" by Douglas Comer. In the TCP chapter it mentions that TCP defines an "endpoint" as a pair (IP address, port number), and a connection is defined by two endpoints. This has a few implications, such as, a local TCP port could be in several connections at once, as long as there are no two from the same IP and the same remote port. This also means that the amount of established connections is almost limitless (2^16 for every IPv4 address. 2^48 in total). Now, in class, I was told that when one connects to a listening port, both sides agree on a different port to use, so the communication can happen and the listener socket remains free. This was also my belief before reading the book. Now I feel like I should obviously trust the book (It's Comer!), but is there any truth to the other explanation? Thanks

  Read the article

• Apache Server Redirect Subdomain to Port

  - by Matt Clark

  I am trying to setup my server with a Minecraft server on a non-standard port with a subdomain redirect, which when navigated to by minecraft will go to its correct port, or if navigated to by a web browser will show a web-page. i.e.: **Minecraft** minecraft.example.com:25565 -> example.com:25465 **Web Browser** minecraft.example.com:80 -> Displays HTML Page I am attempting to do this by using the following VirtualHosts in Apache: Listen 25565 <VirtualHost *:80> ServerAdmin [email protected] ServerName minecraft.example.com DocumentRoot /var/www/example.com/minecraft <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/example.com/minecraft/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> <VirtualHost *:25565> ServerAdmin [email protected] ServerName minecraft.example.com ProxyPass / http://localhost:25465 retry=1 acquire=3000 timeout=6$ ProxyPassReverse / http://localhost:25465 </VirtualHost> Running this configuration when I browse to minecraft.example.com I am able to see the files in the /var/www/example.com/minecraft/ folder, however if I try and connect in minecraft I get an exception, and in the browser I get a page with the following information: minecraft.example.com:25565 -> Proxy Error The proxy server received an invalid response from an upstream server. The proxy server could not handle the request GET /. Reason: Error reading from remote server Could anybody share some insight on what I may be doing wrong and what the best possible solution would be to fix this? Thanks.

  Read the article

• Anonymous FTP upload on CentOS 5.2

  - by Craig

  I need to allow users to upload files to an FTP server anonymously. They should not be able to see any other files, or download files. It is a CentOS 5.2 server. I have a separate partition for the the upload area (mounted at /ftp). I have tried to set up vsftpd, followed all the instructions/advice I could find. But, when a user logs in and tries to transfer a file it throws a "553 could not create file." error. If I do a 'pwd' it shows the directory as "/" rather than the anon_root of "/ftp/anonymous". Any attempt to change the remote directory ends with "550 Failed to change directory.". I have a subdirectory "/ftp/anonymous/incoming" that is writable for the uploads SELinux is in permissive mode. I am running version 2.0.5 release 16.el5 of vsftpd. Here is the vsftpd.conf file: anonymous_enable=YES local_enable=YES write_enable=YES local_umask=002 anon_umask=007 file_open_mode=0666 anon_upload_enable=YES anon_mkdir_write_enable=NO dirmessage_enable=YES xferlog_enable=YES connect_from_port_20=YES chown_uploads=YES chown_username=inftpadm xferlog_std_format=YES nopriv_user=nobody listen=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES ftp_username=inftpadm anon_root=/ftp/anonymous anon_other_write_enable=NO anon_mkdir_write_enable=NO anon_world_readable_only=NO dirlist_enable=YES Can anyone help?

  Read the article

• DNS propagation delay or bad configuration?

  - by Javier Martinez

  I have been waiting the DNS propagation for almost 24 hours. I'am no impatient, but I want to know if I configured my zone good or I have any error in it. I think that is good, because if I use my server dns like my DNS secondary I can resolve and lookup host well. ; ; BIND data file for mydomain.net ; $TTL 86400 @ IN SOA mydomain.net. mydomain.net. ( 20120629 ; Serial 10800 ; Refresh 3 hours 3600 ; Retry 1 hour 604800 ; Expire 1 week 86400 ) ; Negative Cache TTL ; @ IN NS ns1 @ IN NS ns2 IN MX 10 mail ns1 IN A 5.39.X.Y ns2 IN A 5.39.X.Z There is not any errors in /var/syslog about bind daemon. Is everything correct? Do I only need to wait up to 48 hours for the right DNS propagation? My nslookup from a remote machine with the nameserver of the bind host: $ nslookup mydomain.net Server: bind-host-ip Address: bind-host-ip#53 Name: mydomain.net Address: domain-ip

  Read the article

• Comprehensive solution for managing patches, event viewing, change management, inventory, etc

  - by Holocryptic

  I'm looking for a solution that incorporates most or all of the following: Patch Management, Server event viewing/tracking, AD change management, ticketing and internal/external kb, remote access - ability to shadow user sessions or create new ones, imaging, and inventory. Our environments contains Windows Servers and ESXi Hosts (We're not completely virtual, but we're moving that direction). Various Cisco and Linksys switches and firewalls. This is a tall order, and I don't know if it can be done on a reasonable budget. I've looked and found some questions on SF that deal with some of this: http://serverfault.com/questions/72015/active-directory-management-tools-for-medium-sized-forest-less-than-1000-users http://serverfault.com/questions/4021/are-there-any-tools-to-do-change-management-with-active-directory-group-policy http://serverfault.com/questions/21752/what-is-a-good-patch-update-management-server What I'm ideally looking for is a reasonably cheap solution that integrates the features into a central interface. We're a non-profit, so money is a limiting factor (the cheaper, the better; but we have a max of $15k). What we are trying to avoid is having to deal with multiple vendors, while maintaining scalability (we're creating more sites that we'll have to manage). Is this possible, or will we have to cobble together something to make it work for us?

  Read the article

• Want to use something like Citrix XenDesktop, Free Alternative?

  - by Chris

  I'm looking to go into IT, general office server management, and it looks like XenDesktop would be a awesome tool to use. If I get it right, you would store a central image of the OS you want to deploy (in an iso file) on the main server. Then use XenDesktop to pull that image down to the client, and it will then boot the OS inside of the virtual machine. Does it download the image of the OS and store it locally (like cloning the VM onto the client?) I'd love to find a free (possibly open source?) alternative to this, I keep on hearing about KVM in Linux and PXE booting a minimalistic OS to use remote KVMs.... Would that be what I'm looking for? Ideally, I'd like a system.. - That allows me to manage one central image for multiple clients (virtualized hardware) - Easily boot a thin client OS that connected to XenDesktop. Would those things be possible with some kind of free alternative? Some guidance would be greatly appreciated.

  Read the article

• VPN Client solution

  - by realtek

  I have several VPN's that I need to establish on a daily basis but from multiple workstations. What I would like to do it have either a server or vpn router that can perform this connection itself and that I can then route traffic through this device or server depending on the subnet I am trying to reach. The issue is that I only use VPN Clients to connect, so I am basically trying to achieve almost a site to site VPN but by using basically a VPN Client type connection from my network. The main VPN Client I use is the Sonicwall Global VPN Client where I initially use a Preshared Key and then it always prompts me for a username and password (not RSA key). My question is, is there any type of linux distro or even a hardware vpn router that can do this and connect to a Sonicwall device as if it were a client? I have tried pfSense which is very good but it fails to connect, probably due to a mismatch of settings. I have tried many others. Even dd-wrt on my router but it does not support whatever protocol Sonicwall uses. (I thought L2TP/IPSec) but it appears it may not be that. Any advice would be great! The other other thing I have thought of that I have not tried yet is Windows Server Routing and Remote Access but I have a feeling that won't work either. Thanks

  Read the article

• Transparent proxying leaves sockets with SYN_RCVD in MacOS X 10.6 Snow Leopard (and maybe FreeBSD)

  - by apenwarr

  I'm trying to create a transparent proxy on my MacOS machine in order to port the sshuttle ssh-based transproxy VPN from Linux. I think I almost have it working, but sadly, almost is not 100%. Short version is this. In one window, start something that listens on port 12300: $ while :; do nc -l 12300; done Now enable proxying: # sysctl -w net.inet.ip.forwarding=1 # sysctl -w net.inet.ip.fw.enable=1 # ipfw add 1000 fwd 127.0.0.1,12300 log tcp from any to any And now test it out: $ telnet localhost 9999 # any port number will do # this works; type stuff and you'll see it in the nc window $ telnet google.com 80 # any host/port will do # this *doesn't* work! After the latter experiment, I see lines like this in netstat: $ netstat -tn | grep ^tcp4 tcp4 0 0 66.249.91.104.80 192.168.1.130.61072 SYN_RCVD tcp4 0 0 192.168.1.130.61072 66.249.91.104.80 SYN_SENT The second socket belongs to my telnet program; the first is more suspicious. SYN_RCVD implies that my SYN packet was correctly captured by the firewall and taken in by the kernel, but apparently the SYNACK was never sent back to telnet, because it's still in SYN_SENT. On the other hand, if I kill the nc server, I get this: $ telnet google.com 80 Trying 66.249.81.104... telnet: connect to address 66.249.81.104: Connection refused telnet: Unable to connect to remote host ...which is as expected: my proxy server isn't running, so ipfw redirects my connection to port 12300, which has nobody listening on it, ie. connection refused. My uname says this: $ uname -a Darwin mean.local 10.2.0 Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386 i386 Does anybody see any different results? (I'm especially interested in Snow Leopard vs Leopard results, as there seem to be some internet rumours that transproxy is broken in Snow Leopard version) Any advice for how to fix?

  Read the article

• rsnapshot - not correctly archiving mysql databases

  - by Tiffany Walker

  My rsnapshot configuration: snapshot_root /.snapshots/ backup /home/user localhost/ backup_script /usr/local/backup_mysql.sh localhost/mysql/ Using this file: NOW=$(date +"%m-%d-%Y") # mm-dd-yyyy format FILE="" # used in a loop ### Server Setup ### #* MySQL login user name *# MUSER="root" #* MySQL login PASSWORD name *# MPASS="YOUR-PASSWORD" #* MySQL login HOST name *# MHOST="127.0.0.1" #* MySQL binaries *# MYSQL="$(which mysql)" MYSQLDUMP="$(which mysqldump)" GZIP="$(which gzip)" # get all database listing DBS="$($MYSQL -u $MUSER -h $MHOST -p$MPASS -Bse 'show databases')" # start to dump database one by one for db in $DBS do FILE=$BAK/mysql-$db.$NOW-$(date +"%T").gz # gzip compression for each backup file $MYSQLDUMP --single-transaction -u $MUSER -h $MHOST -p$MPASS $db | $GZIP -9 > $FILE done It dumps the databases under / I then tried with the following: http://bash.cyberciti.biz/backup/rsnapshot-remote-mysql-backup-shell-script/ I got: rsnapshot hourly ---------------------------------------------------------------------------- rsnapshot encountered an error! The program was invoked with these options: /usr/bin/rsnapshot hourly ---------------------------------------------------------------------------- ERROR: backup_script /usr/local/backup_mysql.sh returned 1 WARNING: Rolling back "localhost/mysql/" ls -la /.snapshots/hourly.0/localhost/mysql total 8 drwxr-xr-x 2 root root 4096 Nov 23 17:43 ./ drwxr-xr-x 4 root root 4096 Nov 23 18:20 ../ What exactly am I doing wrong? EDIT: # /usr/local/backup_mysql.sh *** Dumping MySQL Database *** Database> information_schema..cphulkd..eximstats..horde..leechprotect..logaholicDB_ns1..modsec..mysql..performance_schema..roundcube..test.. *** Backup done [ files wrote to /.snapshots/tmp/mysql] *** root@ns1 [~]# ls -la /.snapshots/tmp/mysql total 8040 drwxr-xr-x 2 root root 4096 Nov 23 18:41 ./ drwxr-xr-x 3 root root 4096 Nov 23 18:41 ../ -rw-r--r-- 1 root root 1409 Nov 23 18:41 cphulkd.18_41_45pm.gz -rw-r--r-- 1 root root 113522 Nov 23 18:41 eximstats.18_41_45pm.gz -rw-r--r-- 1 root root 4583 Nov 23 18:41 horde.18_41_45pm.gz -rw-r--r-- 1 root root 71757 Nov 23 18:41 information_schema.18_41_45pm.gz -rw-r--r-- 1 root root 692 Nov 23 18:41 leechprotect.18_41_45pm.gz -rw-r--r-- 1 root root 2603 Nov 23 18:41 logaholicDB_ns1.18_41_45pm.gz -rw-r--r-- 1 root root 745 Nov 23 18:41 modsec.18_41_45pm.gz -rw-r--r-- 1 root root 138928 Nov 23 18:41 mysql.18_41_45pm.gz -rw-r--r-- 1 root root 1831 Nov 23 18:41 performance_schema.18_41_45pm.gz -rw-r--r-- 1 root root 3610 Nov 23 18:41 roundcube.18_41_45pm.gz -rw-r--r-- 1 root root 436 Nov 23 18:41 test.18_41_47pm.gz MySQL Backup seems fine.

  Read the article

• How do I collect SNMP readings from intermittently-connected sites?

  - by Luke404

  I am collecting SNMP data on-site for a number of systems, currently using Cacti. These systems are spread on a number of sites that aren't always connected to internet, but I also need to centralize the data on a single system (datacenter housed server) and get graphs out of it. If I directly poll remote systems with a centralized Cacti I'd loose data when a site is not connected to internet. I should record data on-site (I have a server at each site and I can run whatever I want on it) and then 'sync' everything to the central system. One hack could be a cacti or directly an rrdtool on site and then periodically rsync RRD data to the central Cacti system, but that doesn't sound like a 'clean' solution: every RRD would have to be defined at both places and rsync scripts setup with the specific file names. Can you suggest a better solution? Cacti is not a requirement but I'd like to use something like that on the central system. On-site systems need only to collect data I don't need to graph it there or manage users rights to view data and stuff like that, users will only access the centralized system.

  Read the article

• Network card/driver stops under heavy load

  - by Uwe Keim

  Since about approx. 2 month, I do have the following issue with my approx. 1 year old development machine (Windows 7, 64 bit): When doing network intensive operations, like e.g. executing some SQL script on a remote SQL server to select or update 1000 of records, the network card stops working. I.e. suddenly, No network connection is present anymore. No internet, no local connection, simply nothing. The only resolution so far I found is to disable my network card and then simply enable it back, like in the following screenshots: 1.) Click "Deactivate" 2.) Click "Activate" (German screenshots only, sorry) Now this is an acceptable solution to work around this issue, but I would love to have this fixed, since it suddenly stops me from working when I'm connected remotely via VPN/RDP on my machine (Win7 64bit). So my question is: Could you imagine a possible cause for this issue and give some hints how to hunt/resolve it? I could imagine that this is a driver issue, a hardware issue or even some kind of background software issue like a software firewall or a virus scanner.

  Read the article

• VPN Setup: Mac OS X and SonicWall

  - by noloader

  I'm trying to get VPN access up and running. The company has a SonicWall firewall/concentrator and I'm working on a Mac. I'm not sure of the SonicWall's hardware or software level. My MacBook Pro is OS X 10.8, x64, fully patched. The Mac Networking applet claims the remote server is not responding. The connection attempt subsequently fails: This is utter bullshit, as a Wireshark trace shows the Protected Mode negotiation, and then the fallback to Quick Mode: I have two questions (1) does Mac OS X VPN work in real life? (2) Are there any trustworthy (non-Apple) tools to test and diagnose the connection problem (Wireshark is a cannon and I have to interpret the results)? And a third question (off topic): what is broken in Cupertino such that so much broken software gets past their QA department? EDIT (12/14/2012): The network guy sent me "VPN Configuration Guide" (Equinox document SonicOS_Standard-6-EN). It seems an IPSec VPN now requires a Firewall Unique Identifier. Just to be sure, I revisited RFC 2409, where Main Mode, Aggressive Mode, and Quick Mode are discussed. I cannot find a reference to Firewall Unique Identifier. I think I am screwed here: I am trying to connect to a broken (non-standard) firewall, with a broken Mac OS X client. Fortunately, I can purchase VPN Tracker Personal (a {SonicWall|Equinox}-authored client) for $129US from Equinox. So much for standards....

  Read the article

• Solaris 10 invalid ARP requests from 0.0.0.0? Link up/down every hour or 2

  - by JWD

  The guys at the data center where I'm hosting a server running Solaris 10 are telling me that my server is making a lot of invalid arp requests. This is an example of a portion of what was sent to me from the logs (with Mac addresses and IP addresses changed). [mymacaddress]/0.0.0.0/0000.0000.0000/[myipaddress]/[Datestamp]) It's being logged every hour. I don't see anything in the arp tables (arp -a) or routing tables (netstat -r) and I don't see anything relating to 0.0.0.0 when snoping the arp requests. The only place I see any reference to 0.0.0.0 is if I do netstat -a for the SCTP SCTP: Local Address Remote Address Swind Send-Q Rwind Recv-Q StrsI/O State ------------------------------- ------------------------------- ------ ------ ------ ------ ------- ----------- 0.0.0.0 0.0.0.0 0 0 102400 0 32/32 CLOSED But not really sure what that means. Doesn't seem like I can disable SCTP. There are some tunable SCTP parameters but it's not something I'm familiar with. Do I have to add changes to /etc/system? Looks like sctp_heartbeat_interval might be what I need to change? If it makes any difference, I have a few solaris zones running on this server, each with their own IP address on a virtual interface. eth0:0, eth0:1, etc. Does anyone have any idea what might be causing this and how to stop it? I think the switch I'm connected to doesn't like it and momentarily drops the connection. Is there anyway to at least block those requests using ipfilter or something else? Update: This was happening more frequently but now it seems to be happening roughly every hour or every two hours. It's not consistent. I tried setting setting the link speed and duplex to match the switch port and that seemed to make it stop happening for a few hours but then it started again.

  Read the article

• Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

  - by WerkkreW

  Hello - I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified with SpeakEasy and Speedtest.net) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

  Read the article

• Set proper rights for sshfs mountpoint so it can be shared with samba

  - by CS01

  I have a domain hoster that provides access via SSH. My platforms are: Gentoo 2.6.36-r5 Windows (XP/Vista/7) I work on my Windows, I use Gentoo to do all the magic Windows can't do. Therefore I use sshfs to mount the remote public directory for my domain to /mnt/mydomain.com. Authentication is done via keys, so lazy me don't have to type in my password every now and then. Since I do my coding on Windows, and I don't want to upload/download the changed files all the time, I want to access this /mnt/mydomain.com via a samba share. So I shared /mnt in samba, all mounts except mydomain.com is listed on my Windows Explorer. My theories are: sshfs does not set the mountpoint uid/gid to something that samba expects samba does not know that it has to include the uid/gid that /mnt/mydomain.com has been set. All above is wrong, and I don't know. Here are configs and output from console, need anything else just let me know. Also no errors or warnings that I take notice of being relevant to this issue, but I might be wrong. gentoo ~ # ls -lah /mnt total 20K drwxr-xr-x 9 root root 4.0K Mar 26 16:15 . drwxr-xr-x 18 root root 4.0K Mar 26 2011 .. -rw-r--r-- 1 root root 0 Feb 1 16:12 .keep drwxr-xr-x 1 root root 0 Mar 18 12:09 buffer drwxr-s--x 1 68591 68591 4.0K Feb 16 15:43 mydomain.com drwx------ 2 root root 4.0K Feb 1 16:12 cdrom drwx------ 2 root root 4.0K Feb 1 16:12 floppy drwxr-xr-x 1 root root 0 Sep 1 2009 services drwxr-xr-x 1 root root 0 Feb 10 15:08 www /etc/samba/smb.conf [mnt] comment = Mount points writable = yes writeable = yes browseable = yes browsable = yes path = /mnt /etc/fstab sshfs#[email protected]:/home/to/pub/dir/ /mnt/mydomain.com/ fuse comment=sshfs,noauto,users,exec,uid=0,gid=0,allow_other,reconnect,follow_symlinks,transform_symlinks,idmap=none,SSHOPT=HostBasedAuthentication 0 0 For an easier read: [email protected] /home/to/pub/dir/ /mnt/mydomain.com/ options: comment=sshfs noauto users exec uid=0 gid=0 allow_other reconnect follow_symlinks transform_symlinks idmap=none SSHOPT=HostBasedAuthentication Help!

  Read the article

• Distributing processing for an application that wasn't designed with that in mind

  - by Tim

  We've got the application at work that just sits and does a whole bunch of iterative processing on some data files to perform some simulations. This is done by an "old" Win32 application that isn't multi-processor aware, so new(ish) computers and workstations are mostly sitting idle running this application. However, since it's installed by a typical Windows Install Shield installer, I can't seem to install and run multiple copies of the application. The work can be split up manually before processing, enabling the work to be distributed across multiple machines, but we still can't take advantage of multiple core CPUs. The results can be joined back together after processing to make a complete simulation. Is there a product out there that would let me "compartmentalize" an installation (or 4) so I can take advantage of a multi-core CPU? I had thought of using MS Softgrid, but I believe that still depends on a remote server to do the heavy lifting (though please correct me if I'm wrong). Furthermore, is there a way I can distribute the workload off the one machine? So an input could be split into 50 chunks, handed out to 50 machines, and worked on? All without really changing the initial application? In a perfect world, I'd get the application to take advantage of a DesktopGrid (BOINC), but like most "mission critical corporate applications", the need is there, but the money is not. Thank you in advance (and sorry if this isn't appropriate for serverfault).

  Read the article

< Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >