Search Results

Search found 27336 results on 1094 pages for 'network state'.

Page 331/1094 | < Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >

  • 2 routers, both DHCP, no IP assigned

    - by piobyz
    I can't get DHCP to assign IP to my wireless devices. My network config is as follows: Nanostation5 Linksys WRT350N, which is connected with Nanostation via its INTERNET port. Nanostation: LAN IP Address: 192.168.1.20 WLAN IP Address: 192.168.0.79 Network Mode: Router and is getting its IP via DHCP from my ISP Netmask: 255.255.255.0 Gateway IP: 192.168.1.1 LAN Network settings: IP Address: 192.168.1.20 Netmask: 255.255.255.0 Enable NAT: YES ENABLE DHCP Server: YES Range 192.168.1.100 ~ 250 Netmask: 255.255.255.0 Enable DNS Proxy: YES Linksys: Internet Connection Type: DHCP Router IP: 192.168.2.1 Subnet Mask: 255.255.255.0 DHCP: Enabled Start IP: 192.168.2.100 ~ 120 Advanced Routing: NAT: Enabled What I can do is connecting manually with this config: IP: 192.168.2.101 Subnet Mask: 255.255.255.0 Router: 192.168.2.1 DNS: 192.168.1.20 Search domains: WRT350N I want to be able to connect to both routers independently(now its 192.168.1.20 for Nanostation, and 192.168.2.1 for Linksys) and connect any wireless device using DHCP. What should be IP ranges, masks, etc. on both devices?

    Read the article

  • Virtual Box Networking; How to configure bridged networking on Windows 7

    - by Krist van Besien
    I have VirtualBox on Windows 7. I have two virtual machines running RHEL, that work fine when the network is set to NAT. However I want to change the network adapters for the VM's to bridged in stead of NAT. However when I go in to the VM configuration, and select bridged I also need to select an adapter, but there is nothing to select. Apparently I need to install a separate driver/filter on the network adapter. However I don't know where to start. I reinstalled VirtualBox (latest version) but did not see an option to install such driver. What should I do?

    Read the article

  • Wireless not working on desktop with Asus USB-N13 (B1) wireless adapter

    - by user900749
    I am trying to connect my desktop to a wireless network. I have purchased an ASUS USB-N13 B1 adapter. I have followed instructions for installing drivers and disabling conflicting drivers. I have thoroughly searched and could not find a solution. The adapter is recognized and powered on. I have entered the ssid and password information into the wireless network configuration. Other machines can connect to this wireless network, and the machine can connect online via ethernet without issue. Here is the output of some commands which summarize my configuration, and might give some clues : ~$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" ~$ uname -a Linux petra 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux ~$ lsusb Bus 001 Device 006: ID 0b05:17ab ASUSTek Computer, Inc. ~$ dmesg [ 1883.823150] wlan0: authenticate with 48:5b:39:e7:25:5e (try 1) [ 1884.020027] wlan0: authenticate with 48:5b:39:e7:25:5e (try 2) [ 1884.220025] wlan0: authenticate with 48:5b:39:e7:25:5e (try 3) [ 1884.420023] wlan0: authentication with 48:5b:39:e7:25:5e timed out Any assistance would be appreciated as I have been trying to get this machine online for several weeks now to no avail. Sincerely, Michael.

    Read the article

  • Cannot Access a Shared Folder Using Windows 2008

    - by peter
    Hi All, I have a NAS drive, and this is sharing some folders. I cannot access those folders from a windows 2008 machine which is on the network. The are both connected to the same network switch. e.g. if I go like this, \\server\ or \\server\folder I get the message 'windows cannot access \\server check the spelling, click diagnose' etc. Error code: 0x80004005 The thing is that I can connect to this shared drive from a windows 7 laptop connected wirelessly to the same network. I can ping the server from windows 2008, but only if I use the IP address, not the server name.

    Read the article

  • Can't connect to wireless-n in dual mode.

    - by Tyllyn
    I recently purchased a Acer Aspire Revo AR3610-U9022. This little nettop uses a Atheros AR5B91 Wireless Network Adapter. I also have a Netgear RangeMax NEXT Wireless Route (model WNDR3300). I have been using this router in dual mode (11G and 11N) on my normal desktop without a problem (Mode: Up to 270Mbps at 5GHz & 54Mbps at 2.4 GHz), but doing this, my Revo won't detect the 11N network as being around... my desktop still does, but the Revo, nope... just the 11G. However, when I switch my router over to just "Up to 270Mbps at 2.4GHz", it kills the 11G entirely, but the Revo recognizes the 11N network. I'm a programmer by trade, and this hardware-y stuff confuses me more than it should. Is there any way that I could set this stuff up so my Revo can connect to the 11N part of my router, but keep the 11G around? :) Thanks!

    Read the article

  • Hyper-V virtual machine unable to get IP address from DHCP server running on same physical box

    - by Bronumski
    We have a Windows server 2008 R2 with two network cards running AD, DHCP, DNS and Hyper-V The first nic is setup with a static IP address and DHCP, WDS, and DNS are bound to it. The second nic is configured in Hyper-V to be only used by Hyper-V and has been automatically configured so that only the virtual switch is enabled on the adapter. DHCP and DNS work fine for all physical machines on the network. It also works for Virtual Machines running on another physical box. Virtual machines that are bound to the virtual switch network adapter are unable to get a IP address. If the virtual machine is given a static IP address with correct subnet, gateway and dns everything works. Has anyone else got this working?

    Read the article

  • Good university for computer science with plans for game development

    - by DukeYore
    I am starting my computer science degree at a local community college in programming using C++. However, I will be transferring to a 4-year university. Does anyone have any insight on university programs? I know Cal State Fullerton has a degree with a minor in Game Development. however, is that as important as getting a degree from a really great school? If I could shoot for something like Cal Poly would that be better? Or even Stanford or SF State being so close to so many gaming companies up there in the Bay area? Thank you in advance for any guidance.

    Read the article

  • VirtualBox - Mac OSX host Win7 guest - no Internet access for guest VM

    - by nodelayheehoo
    I have a Mac running OSX 10.9.2, and I just downloaded and installed a Win7 IE9 VM in VirtualBox. My Mac uses Wi-Fi for internet access, and it's behind a proxy (it's a work machine). VirtualBox loads the VM fine, and at some point the VM can see the DNS servers of the host. But I've never been able to make the VM have internet access. I've tried all kinds of combinations of Network settings on the VM via the VirtualBox Settings, in conjunction with Internet Sharing in OSX's System Preferences, but no luck. Has anyone done a similar setup and made the VM successfully connect to the Internet? Thanks in advance for any inputs. [ Update: I was able to get internet access for the VM when the host was using my home network. When I ran the VPN software to connect to the work network, the internet access went away again.] (Initially posted this on stackoverflow.com, but it was put on hold as off-topic by several users, and was advised to ask here instead)

    Read the article

  • Windows Server 2008 Active Directory DNS setup

    - by Mister IT Guru
    I have to setup a small windows network inside my bigger linux/mac infrastructure. In order to get the windows clients logging onto the domain, I have had to make the DC their primary DNS server, which seems to have worked. I would much prefer to have one DNS server running on my network, or at least one authoritative server running on the network. I have a USG 200 router/firewall and I can configure some static records for DNS, but I an not sure what I need to put in order to get DNS and AD working together, and hints and tips appreciated.

    Read the article

  • WolframAlpha Can Now Do In-depth Analysis of Your Facebook Account

    - by Jason Fitzpatrick
    If you’re a big fan of WolframAlpha’s ability to crunch the numbers on just about anything–and we certainly are–you’ll likely be just as delighted as we were to watch it massage the data from your Facebook account. Find out your most liked, discussed, and shared posts, see your Facebook habits, and other neat trends. I unleashed it on my account this morning, not sure what to expect from the results. Within the results tabulation WolframAlpha provided me with all sorts of neat data break downs. I now know exactly how many days it is to my next birthday, the composition of my aggregate posting habits (how many posts are status updates, links, or photos), the time of day when I do the most posting (and what the composition of those posts is), and my average post length. I also know my most liked post and my most commented on post. It will even crunch the numbers on your network of friends (60.6% of my friends are married, for example). By far one of the more interesting data analysis it does on the friendship data, however, is organizing all your friends into relationship clusters so you can see who in your Facebook network is friends with other people in your Facebook network. The service from WolframAlpha is free: simply visit the WolframAlpha search portal and type in “Facebook report” to start the process. You’ll be prompted to create a WolframAlpha account if you don’t have one and to authorize the WolframAlpha Facebook app to access your data. Your Facebook data is cached to your WolframAlpha account for one hour in order to crunch the numbers and display the results. WolframAlpha HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows? Java is Insecure and Awful, It’s Time to Disable It, and Here’s How

    Read the article

  • Setting up 802.1X wireless connection on OSX

    - by hizki
    I am an OSX user, I have Snow Leopard 10.6.5 and an updated AirPort. I am trying to connect to my university's wireless network, but it has a complex security that I am having trouble defining... Here there are instructions for connecting with Windows XP, Windows 7 and Linux. Can someone please instruct me what should I do to set up this network on my MAC? Thank you. P.S. I have had previous success in setting up this network, but I have no idea what I did that made it work. Since I updated my AirPort it worked only seldomly and very slowly... Before the update, even when it worked it never remembered my password.

    Read the article

  • Separating two networks

    - by Farhan Ali
    I have two routers, R1 and R2. R1 (a stock linksys router running dd-wrt) is connected to internet and is serving internet to a network of 5 devices/PCs running a DHCP server, with a network of 192.168.1.0/24. R1 also serves internet services to R2. R2 (a ubuntu server 12.04) gets internet from R1. R2 has 3 PCs attached to it, runs a DHCP server with a network of 172.22.22.0/24. My requirement is that the clients on both sides should not talk to each other at all – with the exception that R1 clients may access the R2 router through its IP of 192.168.1.x. At the moment, R2 clients are able to ping R1 clients, which is unacceptable, whereas R1 clients cannot ping R2 clients, which is OK. I believe iptables could be set up but I don't know how.

    Read the article

  • Silverlight Cream for December 08, 2010 -- #1005

    - by Dave Campbell
    In this Issue: Peter Kuhn, David Anson, Jesse Liberty, Mike Taulty(-2-, -3-), Kunal Chowdhury, Jeremy Likness, Martin Krüger, Beth Massi(-2-, -3-)/ Above the Fold: Silverlight: "Rebuilding the PDC 2010 Silverlight Application (Part 1)" Mike Taulty WP7: "WP7: Glossy text block custom control" Martin Krüger Lightswitch: "How to Create a Screen with Multiple Search Parameters in LightSwitch" Beth Massi From SilverlightCream.com: Requirements of and pitfalls in Windows Phone 7 serialization Peter Kuhn discusses Data Contract Serializer issuses on WP7 and how to work around them. Managed implementation of CRC32 and MD5 algorithms updated; new release of ComputeFileHashes for Silverlight, WPF, and the command-line! David Anson ties up some loose ends from a prior post on hash functions, and updates his CRC32 and MD5 algorithms. Windows Phone From Scratch #9 – Visual State Jesse Liberty's latest Windows Phone from Scratch tutorial up... and is on the Visual State... he extends a Button and codes up the State Transitions. Rebuilding the PDC 2010 Silverlight Application (Part 1) Mike Taulty has taken the time to rebuild the PDC2010 Silverlight App that folks wanted the source for... and he's taking multiple posts to explain the heck out of it. This first one is mostly infrastructure. Rebuilding the PDC 2010 Silverlight Application (Part 2) In the 2nd post of the series, Mike Taulty is handling the In/Out of Browser business because he eventually is going to be going OOB. Rebuilding the PDC 2010 Silverlight Application (Part 3) Part 3 finds Mike Taulty delving into WCF Data Services and getting some data on the screen. Paginating Records in Silverlight DataGrid using PagedCollectionView Kunal Chowdhury continues with his investigation of the PagedCollectionView with this post on Pagination of your data. Old School Silverlight Effects If you haven't seen Jeremy Likness' 'Old School' Effects page yet, go just for the entertainment... you'll find yourself hanging around for the code :) WP7: Glossy text block custom control Martin Krüger's latest post is a very cool custom control for WP7 that displays Glossy text... it ain't Metro, but it looks pretty nice... some of it almost like etched text. How to Create a Screen with Multiple Search Parameters in LightSwitch Looks like Beth Massi got a few Lightswitch posts in while I wasn't looking. First up is this one on a multiple-parameter search screen. Adding Static Images and Logos to LightSwitch Applications In the 2nd post, Beth Massi shows how to add your own static images and logos to Lightswitch apps... in response to reader questions. Getting the Most out of LightSwitch Summary Properties In her latest post, Beth Massi explains what Summary Properties are in Lightswitch and how to use them to get the best results for your users. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Must I have Exchange to use Blackberry Enterprise Server Express?

    - by John Spaz
    In the past I've setup BES (not express) for a company that just wanted their users on the corporate network, they didn't care for email or any other enterprise feature, they just wanted to push a policy that the phones internet should be routed through the corporate network. I want to setup BES Express now for a customer that also just wants the phones on his network but wherever I look, it says that BES Express requires Exchange. Is there a way to install BES Express without Exchange and without a AD Domain? Basically what the customer wants to accomplish is to be able to filter and log the internet access on the phones.

    Read the article

  • Immutable Method in Java

    - by Chris Okyen
    In Java, there is the final keyword in lieu of the const keyword in C and C++. In the latter languages there are mutable and immutable methods such as stated in the answer by Johannes Schaub - litb to the question How many and which are the uses of “const” in C++? Use const to tell others methods won't change the logical state of this object. struct SmartPtr { int getCopies() const { return mCopiesMade; } }ptr1; ... int var = ptr.getCopies(); // returns mCopiesMade and is specified that to not modify objects state. How is this performed in Java?

    Read the article

  • Windows Server 2003 Router with PortForwarding

    - by jM2.me
    Hello, I am owning a small company and we have purchased a server to setup few server applications on it as well as other software. We would like to setup our network in following way Internet<-WindowsServer2003 as router<-Switch<-Office Computers Server has two nic interfaces and we have 24ports 1GB network switch connected to one nic and internet connection to another nic. Our ISP is Frontier and we have Fios 25/25. We get network cable out of ONT box directly connected to our server. There are no modems/routers. Setting up DHCP on windows 2003 is easy job but we would like to have the ability to port forward some ports from office computers. I have some knowledge in networking but not as much. How could I setup FHCP server on win2k3 with the ability to port forward some ports to office computers? Thank you for your time

    Read the article

  • Nodes inside Cisco VPN. Incoming SSH requests allowed. But can't initiate an outbound SSH.

    - by Douglas Peter
    I've a gateway-to-gateway VPN setup between my Linksys RV042 router and a Cisco VPN. I am able to SSH into any of the machine inside the VPN from my network. But none of the machines inside the VPN can initiate an SSH into my network. It seems they've blocked even all ping requests to my network gateway. This is the requirement: I have scripts that SSH into the machines inside the VPN and run a long mysql query. The query generates an output to a file. The time that these queries take is variable. So I have a loop in my machine that periodically SSHes into the VPN machine and checks if the query has finished, and pulls the generated file using SCP. I need to simplify it thus: The script will run at the machine inside the VPN, and when the query completes, it will SSH into my machine and pushes the generated file. Thanks for any ideas.

    Read the article

  • Commandline Purge in AS11

    - by Dheeraj Kumar
    AS11 - B2B offering consists of numerous features that have been made available via commandline approach. Most of these are supplement to the already available User Interface based approach. One such is purging of runtime data. The commandline purge option enables the users to purge the runtime data, based on various criteria. This is an ANT based command, provides the flexibility to selectively set the criteria to purge the runtime data. Providing the command line option also enables the administrator to purge in bulk, without visiting the B2B UI, which can also be used for automation purpose By default archival is turned on for purge activity. As a pre-requisite, the respective folder needs to be configured in database with the proper permission. When no filename is provided for archived data, the sysdate will be considered for filename. Below are the various options to purge the runtime data Normal 0 Option ANT option   Message state -Dmsgstate   Date range -Dfromdate,  -Dtodate Format : dd/mm/yyyy hh:mm AM/PM Trading partner -Dtp   Direction -Ddirection   Message Type -Dmsgtype   Agreement Name -Dagreement   IdType/ value -Didtype,  -Didvalue   Archive -Darchive True/false By default true Archive file name -Darchivename File name (optional), will be used when archive is set to true. Normal 0 Note: When using -Darchivename the value must be a unique file name. An existing file name used with -Darchivename throws an exception v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 Below are the few of ant commands and various options.   Purge based on date range and message state: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dfromdate="19/12/2009 1:04 AM" -Dtodate="19/12/2009 1:05 AM" -Dmsgstate=MSG_COMPLETE -Darchivename="filename.dmp"  Purge based on direction: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Ddirection="OUTBOUND" Normal 0 Purge based on agreement Name: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dagreement="agreement_name" Normal 0 Purge based on Trading partner Name: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dtp=GlobalChips Normal 0 Purge based on Message State: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dmsgstate="MSG_COMPLETE" Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Ddirection="OUTBOUND" -Dmsgstate="MSG_COMPLETE"

    Read the article

  • Configure Windows Routes for VPN

    - by Florin Sabau
    I have a Virtual PC/VMWare machine that runs Windows Server 2003. This virtual machine uses an IPSec VPN client program to connect to a remote network. I configured the virtual machine to have 2 NICs: NAT - to be used by the VPN Client to access the remote network Host only - to be able to access the virtual machine from the host The reason I have this setup is because I want to be able to access some remote network from the host machine. I could've installed the VPN client on the host machine, but the host runs Windows 7 and the client doesn't support it. The problem: although the virtual machine is normally reachable (ping + http access), as soon as the VPN client is started, neither of the NIC addresses are reachable anymore. I'm wondering if it is a routing problem that needs to be addressed? How do routing/VPN client connection affect the ability of the server to respond to client requests from the host?

    Read the article

  • how do I remove the last connected users from the lightdm greeter list

    - by Christophe Drevet
    With gdm3, I was able to remove the last connected users from the list by removing the file '/var/log/ConsoleKit/history' With lightdm, the last users appears even when : removing /var/log/ConsoleKit/history removing /var/lib/lightdm/.cache/unity-greeter/state Where does lightdm store this list ? Edit: It seems like it's using the content from the last command. Then purging the content of the file /var/log/wtmp is sufficient to remove any previously connected user from the list : # > /var/log/wtmp But, after doing this, I have the unwanted side effect that users loging in via lightdm doesn't appears at all in this list. I must say that I'm in a enterprise network environment using NIS. Edit2: Well, it seems that lightdm uses wtmp to display recent network users list, but does not update it. So, lightdm will show a network user only if it logged in in another fashion (ssh, login), like I did on this computer before. cf: https://bugs.launchpad.net/lightdm/+bug/871070 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=648604 Edit3: I just added the following line to the file /etc/pam.d/lightdm To force lightdm to store users in wtmp : session optional pam_lastlog.so silent

    Read the article

  • How to do simple multitasked loop processing over filenames with PowerShell?

    - by Ville Koskinen
    I'm batch transcoding some 50 GB of video files on a USB hard disk which is connected to a wlan router. The drive is mapped as a network drive on my Windows 7 laptop. The speed handicap of the wlan causes some parts of the processing to become unnecessarily slow, so I would like to do the following with PowerShell: List the names of the files on the network drive to be transcoded Copy the first file to a temporary folder on my laptop Simultaneously Transcode the file in the folder Begin copying the next file from the network drive to the temporary folder After transcoding and copy have both ended, Delete the file which has been transcoded from the temporary folder Begin transcoding next file in the temporary folder Loop until all files have been processed How would I be able to do this with PowerShell? The multitasking part is an obstacle for my skill/persistence combination.

    Read the article

  • XP Mode as a server, Win 7 as a client

    - by Spyro
    I have two virtual machines (XP Mode). They are connected to each other by a network setting - Internal Network. It is the only working setting. This is the only way I got two virtual XP to ping each other. Now I want to connect each of them from the application that runs on Windows 7 which is hosting both virtual machines, but I can't do that. The firewall on both XP-Mode machines is disabled. Any other networking setting added as additional adapter on Xp-Mode machine does not allow me to connect from Windows 7. So my question is this - how to enable connection from Windows 7 application to XP mode application (client - server)? Point 2 (pass message) work perfectly because of the "internal network" setting. The problem is point 1 and 3.

    Read the article

  • Designing for an algorithm that reports progress

    - by Stefano Borini
    I have an iterative algorithm and I want to print the progress. However, I may also want it not to print any information, or to print it in a different way, or do other logic. In an object oriented language, I would perform the following solutions: Solution 1: virtual method have the algorithm class MyAlgoClass which implements the algo. The class also implements a virtual reportIteration(iterInfo) method which is empty and can be reimplemented. Subclass the MyAlgoClass and override reportIteration so that it does what it needs to do. This solution allows you to carry additional information (for example, the file unit) in the reimplemented class. I don't like this method because it clumps together two functionalities that may be unrelated, but in GUI apps it may be ok. Solution 2: observer pattern the algorithm class has a register(Observer) method, keeps a list of the registered observers and takes care of calling notify() on each of them. Observer::notify() needs a way to get the information from the Subject, so it either has two parameters, one with the Subject and the other with the data the Subject may pass, or just the Subject and the Observer is now in charge of querying it to fetch the relevant information. Solution 3: callbacks I tend to see the callback method as a lightweight observer. Instead of passing an object, you pass a callback, which may be a plain function, but also an instance method in those languages that allow it (for example, in python you can because passing an instance method will remain bound to the instance). C++ however does not allow it, because if you pass a pointer to an instance method, this will not be defined. Please correct me on this regard, my C++ is quite old. The problem with callbacks is that generally you have to pass them together with the data you want the callback to be invoked with. Callbacks don't store state, so you have to pass both the callback and the state to the Subject in order to find it at callback execution, together with any additional data the Subject may provide about the event is reporting. Question My question is relative to the fact that I need to implement the opening problem in a language that is not object oriented, namely Fortran 95, and I am fighting with my usual reasoning which is based on python assumptions and style. I think that in Fortran the concept is similar to C, with the additional trouble that in C you can store a function pointer, while in Fortran 95 you can only pass it around. Do you have any comments, suggestions, tips, and quirks on this regard (in C, C++, Fortran and python, but also in any other language, so to have a comparison of language features that can be exploited on this regard) on how to design for an algorithm that must report progress to some external entity, using state from both the algorithm and the external entity ?

    Read the article

  • Lot of Multicast traffic on LAN

    - by Nel
    Recently the whole network at work is being hit by multicast traffic originating on the LAN itself. I did some investigating and the service which seems to be responsible is ws-discovery. I have attached a screenshot of wireshark capturing the traffic. I have tried shutting down the source machine from which it was originating, but the multicast traffic still seems to be present in the network. My network topology 2 subnets - 10.10.10.0/24 and 10.20.10.0/24. Gateway is a debian system. We have 3 switches for 3 floors. They are all unmanaged Dlink 24-port switches. Multicast blocking at switch level is out of the question. Any solutions? :(

    Read the article

  • Tor Browser: how do I restart just the browser?

    - by GDR
    I'm using Tor Browser on Linux from time to time, but I close the browser because it has high memory usage, and leave Vidala running in background to help the network and relay traffic. The problem is, when I want to use Tor Browser again, I have to shut down Vidala and start it again. This takes time and has negative effect on the network. When I execute ./App/Firefox/firefox-bin, the browser starts but says it's not connected via Tor network. Any ideas how to start tor browser and make it connect to existing Vidala instance?

    Read the article

< Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >