Search Results

Search found 9861 results on 395 pages for 'embedded systems'.

Page 334/395 | < Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >

• What causes a switch port to receive data not destined for it?

  - by user1693454

  We are having an intermittent fault which is effecting one of our control systems on one of our HP Procurve switches. For some reason, this PLC (10mbit port - 192.168.6.56) which is attached directly to the HP Switch intermittantly start's receiving data which is not destined for it. The data is being sent from a Thecus NAS with latest firmware (192.168.6.218) to a physical IBM Server running Win2003R2 and SAP (192.168.6.225). The problem does not just send to this server, it has been to other physical servers in the past too, but always from the Thecus NAS. I am using a monitor port to wireshark what is going in/out of the PLC - normally there would be about 1mb in/out per 2 or 3 minutes - only a server asking the state of the coils. When the problem occurs, there is a flood of data being put onto the PLC line - in this captured instance, about 67mb in less than a minute. Due to this, there is no way that the PLC can be queried as the port is effectively DOSed, in turn killing part of our factory. I know that having Production on the same vlan as IT is not a good idea - I agree, however it cannot be changed at the moment (will have to wait 3 months), as well as the problem has only started happening in the last 3 months. Here is a screen cap of one of the packets being sent from the Thecus NAS which was captured from the PLC port on the HP Switch: And there are over 700 of these in this one 1024kb file. If anyone has any idea on what could be going on, some help would be greatly appreciated. If you need to know anything more, let me know! Cheers!

  Read the article

• New AD user request form and workflow

  - by user66390

  I'm wondering if anyone is providing a solid solution for creating New Network User Account Request forms, and attaching workflows to them to automate account creation? I'm currently investigating a number of options, but am surprised that such a ubiquitous task hasn't been solved a dozen times over and thoroughly documented. Or at least isn't integrated into current off-the-shelf change management and ticketing systems. Ideally, I'd like for our current ticketing system, ServiceDesk+ to present a standard 'New User' form to department heads, which they can fill in with the required new user details. This triggers a workflow that submits the request as a ticket that can be reviewed and actioned. Actioning the ticket triggers a workflow that creates a user in AD with the details provided, and notifies the department head upon completion. All told, a pretty standard requirement that I'm sure most organizations have. What are other people doing to accomplish this? Edit: I should add, I'm more looking for "supported" methods. As is, I've submitted a number of scripted solutions, none of which have met with manager approval.

  Read the article

• Scripting around the lack of user:password@domain url functionality in jscript/IE

  - by Idiomatic

  I currently have a jscript that runs a php script on a server for me, dead simple. But... I want to be atleast somewhat secure so I setup a login. Now if I use the regular user:password@domain system it won't work (IE decided it was a security issue). And if I let IE just remember the password then it pops up a security message confirming my login every time (which kills the point of the button). So I need a way to make the security message go away. I could lower security settings, which tbh I am fine with but nothing seems to make it fuck off (there might be some registry setting to change). Find a fix for jscript that will let me use a password in the url. There used to be a regedit that worked for older systems which allowed IE to use url passwords (not working on my 64bit windows7 setup) though I doubt that'd have helped jscript anyways (since it outright crashes). Use an app other than IE. Inwhich case I'm not sure how to go about it, I want it to be responsive and invisible so IE was a good choice. It is near instant. Use XMLHttpRequest instead of IE directly? May even be faster but I've no idea if it'd help or just have the same error. Use a completely different approach. Maybe some app that can script website browsing. var args = {}; var objIEA = new ActiveXObject("InternetExplorer.Application"); if( WScript.Arguments.Item(0) == "pause" ){ objIEA.navigate("http://domain/index.html?pause"); } if( WScript.Arguments.Item(0) == "next" ){ objIEA.navigate("http://domain/index.html?next"); } objIEA.visible = false; while(objIEA.readyState != 4) {} objIEA.quit();

  Read the article

• Cancelling Window 7 shutdown diables power button

  - by Jens

  Normally, pressing the power button once initiates a shut-down in Windows 7. If any programs are still running that will not quit (e.g. waiting for a dialogue response), Windows overlays the screen with a dialogue allowing the user to cancel the shut-down. I've just noticed that on two different systems here, using this cancel option disables the shut-down via power button. The power button can still be used to kill the system by holding it for a few seconds, using the Start menu button to shut the PC down still works as well. Steps to reproduce: Open Notepad, type a few characters. Do not save. Press the computer's power button. Wait until the dark screen appears. Press cancel. Press the power button again. Notice how nothing happens. What is the reason for this behaviour, and can it be disabled to always try and shut down the PC when the power button is pressed?

  Read the article

• Putting and configuring grub on an external drive

  - by HisDudeness

  I want to put a bunch of minor emergency operating systems (such as GParted Live, DSL, Puppy Linux and so on) on a partitioned USB pen drive, with a dedicated grub boot loader on it, which I want to start when I select the drive in the BIOS to boot. The problem is: when writing grub boot options I must tell where kernel and initial ram files are located, but the USB drive can have different letters depending on when I did plug it in, if some others external drive were mounted. So, how can I write appropriate options which automatically refer to the drive grub is installed on without having to specify absolute paths, which might change (I mean, like (hd1,msdos1) ot /dev/sdb1)? And, while we are at it, can I have grub working on a device without an operating system on it to which it can refer? I mean, I want to address the command sudo grub-install /dev/sdb from the LMDE system I'm on right now, but I won't have LMDE on my pen drive. Is that a problem? And installing grub on another device, will I keep the grub I have right now on my HDD?

  Read the article

• Trouble with Remote Desktop pulling through printers. Drive Redirection works, and the ports created but not the printers

  - by Windex

  I've run out of things to look into. All the support documents have been gone through and still provide no resolution. I've checked the service permissions, (sc sdshow spooler) they all match up with other systems and what is output on the support documents. I'm nearly positive that the issue can't be permissions anyway as the software requires all users to be an administrator, so all users are a local administrator. (I haven't looked into why yet but its on the list, I was just recently brought into this team and we've put procedures in place for quick recovery.) We've applied hot fixes relating to RDS and printing, though I'm not sure which ones they were. I've combed through group policy and no where is printer redirection disabled. It's setup with all default values regarding the use and redirection of printers and a quick install of W2k8 R2 shows that it works by default. This dev install was joined to the same domain, placed in the same OU, shows the same policies applied, etc, etc, etc, The server generates all the correct redirected ports but no printers are created. It will also redirect drives without issue, this would seem to rule out the usermode service that handles redirects being broken. No events are logged related to any of the events and there are no events from the TerminalServices-Printer source. There were local printers setup. I didn't think it would mattter but as I was running out of ideas I tried deleting them all with no change. The TS was configured for the software it will be running before we checked out the redirection of printers so the other team responsible to setting up new servers wants to find a fix instead of reloading a new server. I'm not sure where or what else to look for. Any ideas?

  Read the article

• How best to handle end user notification in the event of system failure incl. email?

  - by BrianLy

  I've been asked to research ways of handling end user notifications when systems such as email are experiencing problems. Perhaps an example will make this a little clearer. We have a number of sites in different countries. Recently email was impacted at one of the sites, but it could have been a complete network outage. Information was provided by phone to local IT managers at the site but onward communication was slower than some would have liked. It seems like almost everyone at the site has a personal mobile phone which could receive text messages, and perhaps access a remote website with postings on the situation. However managing and supporting a system to text people on these relatively infrequent occasions would be very costly to do internally. What are other people doing to handle situations like this? Some things I've thought of include: Database of phone numbers to text. Seems costly and not very easy to maintain for an already stretched IT group. Is there an external service that would let you do this policies? Send voicemail message to all phones on site. Maintain an external website. This would not work in all situations (network failure), and there is a limit on the amount of info that can be posted externally. A site outage could be sensitive information in some situations. How could the site be password protected? Maybe OpenId/Facebook connect would work. Use a site like Yammer.com which is publicly accessible but only by people with a company email address. Anyone using this for IT outage notifications? To me it looks like there is no clear answer, and that there are solutions for some subsets of users. To be comprehensive a number of solutions would need to be combined. Any additional thoughts or recommendations? What worked or didn't work for your organization?

  Read the article

• Install Peppermint OS three on Asus EeePC

  - by Kithoth

  I just had a new Asus EeePC R051CX. Out of the box, the installed OS is Ubuntu 12.04 LTS, but I am trying to install Peppermint OS three (as single boot). Problem. Once on live CD (well, live USB stick...), I'm in trouble in both following situations: Try Peppermint OS Live In this case, the first thing I get is a message reading The system is running in low-graphics mode Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself. I can solely press "return" to accept, then I have a list of 4 options to answer the question "What would you like to do?". But I simply can't do anything at this moment, except switching to console mode or rebooting (keyboard / mouse controls don't allow me to do anything else). Install Peppermint OS Something I really don't understand... it launches the Ubuntu Recovery Media (which was already installed when I received the device)! Also, it says in the bottom ERROR: This recovery media only functions on Ubuntu systems. All I can do is quit (that is, reboot). One last important thing that comes to my mind: this stick worked just fine on the other computers I've tried it on. I really hope someone could bring me the light, a friend of mine told me how cool this OS is for EeePCs. Don't want to give up! Thanks. Edit I finally could install Peppermint, but not by understanding why I couldn't do it the logical way. Instead, I reinstalled Ubuntu myself (erasing the factory one). Then, I could simply boot on my live USB and perform a fresh install of Peppermint. So, I still don't know how and why the mentioned problem occurred.

  Read the article

• mysqld - master to slave replication using rsync innodb, sequence number issues

  - by Luis

  I've read several of the related topics posted here, but I have not been able to avoid this innodb error. The steps I've taken to replicate data from a Slackware server - 5.5.27-log (S) to a FreeBSD slave - 5.5.21-log (F) were these: (S) flush tables with read lock; (S) in another terminal show master status; (S) stop mysqld via command line in third terminal; (F) while both servers are stopped, rsync mysql datadir from (S), excluding master.info, mysql-bin and relay-* files; (F) start mysqld (skip-slave) 121018 12:03:29 InnoDB: Error: page 7 log sequence number 456388912904 InnoDB: is in the future! Current system log sequence number 453905468629. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: for more information. This kind of error happens for a lot of tables. I know I can use dump, but the database is large, ca. 70GB and the systems are slow (old), so would like to get this replication to work with data transfer. What should I try to solve this issue?

  Read the article

• upstart scripts: run a task after networking goes up

  - by The Journeyman geek

  I'm working on moving my current server setup to newer hardware, and migrating from ubuntu karmic koala to lucid lynx. Currently i'm using gw6c (compiled from the gogo6 website, as opposed to the version from the repositories) to get ipv6 access for my systems. On the karmic koala system, i used simple init.d script to get the ipv6 client started #! /bin/sh /usr/local/gw6c/bin/gw6c -f /usr/local/gw6c/bin/gw6c.conf I figured since this runs at any runlevel, it should translate to respawn console none start on startup stop on shutdown script exec /usr/local/gw6c/bin/gw6c -f /usr/local/gw6c/bin/gw6c.conf emit free6_ipv6_started end script this works fine started from initctrl, but it apparently fails to start when it boots. - its status being stop/waiting. It works fine (and respawns) when started otherwise.Any ideas on where i'm going wrong, and what would be the appropriate 'start on' arguement? EDIT: the exact error is 'init: gw6c main process (xxx) ended with status 8' followed by the process respawning , with xxx being a PID i suspect. I'm also half suspecting this is cause gw6c starts before networking does, and i need my eth0 up before gw6c is

  Read the article

• Outbound ports to allow through firewall

  - by dunxd

  This question was asked before, but in a rather general way. I'm asking more specifically based on my current requirements. We have a number of remote offices made up of a bunch of PCs and an ASA 5505 which is used as firewall and VPN termination point. In the offices we share the internet connection with one or more other organisations over whom we have very little control, asides from the config on the ASAs. For a bunch of reasons I'd like to lock down these ASA 5505s to only allow outbound traffic to ports used by applications we know we need. I'm putting a standard config to roll out to all the ASAs, and if we need to open up ports for the other orgs we can do it on request. But I want to leave open the most commonly required ports so we can get up and running without waiting on other folks technical staff to get back. I plan to allow the following TCP ports to support commonly required resources: POP3 (110 and 995) HTTP (80 and 443) IMAP4 (143 and 993) SMTP (25 and and 465) The question really is, what other ports do I need to leave open to allow for "normal" working. I've seen UDP port 53 for DNS as one. Are there any others that would be worth opening up? Just to note - I'll also be setting up monitoring systems to keep an eye on the ports we do allow. Any of the above could be misused of course. We'll also back all this up with signed agreements. But I'm aiming for a technical solutions where I don't have to start out with the full requirements of everyone we share connections with. See also: outbound ports that are always open

  Read the article

• How to protect folder privacy against unethical network administrators? [closed]

  - by Trevor Trovalds

  I just need a technical solution for the sake of my group's shared passwords, projects, works, etc. safety. Our network has Active Directory with public/groups/users and NTFS permissions, under a Windows Server 2003 which will soon migrate to Windows Server 2008 R2. Our IT crowd is small, consisting of 2 DBAs, 4 designers, 6 developers (including me), 2 netadmins and (a lot of) tech supporters, everyone has local admin rights. Those 2 network admins weren't the ones who set the network up, they just took the lift recently when the previous ones quit. We usually find them laughing at private contents from users stored in the groups AD, sabotaging documents that don't match their personal tastes and, finally, this week we found out they stole a project we (developers and DBAs) were finishing and, long before, they presented it to the CEO as theirs without us knowing. I'm a systems analyst, and initially my group decided to store critical content, like shared passwords, inside encrypted .zip files. Unfortunately we couldn't do the same to the other hundreds of folders and files, which included the stolen project, because the zipping process would take too long for every update. We also tried an encrypted Subversion repository under SSL, but there are many dummies (~38 atm) involved in the projects that have trouble using TortoiseSVN when contributing, and very oftenly we had to fix messed up updates. Well, I think these two give the idea of what we've been trying to reach. So, is there a practical "individual" protection for our extensive data or my hope can already be euthanized? P.S.: Seriously, at the place where I live/work, political corruption gone the wildest, so denounce related options are likely impracticable. Yet both netadmins have strong "political bond" with the CEO and the President, hence their lousy behavior and our failed delation attempts.

  Read the article

• Apache mod_disk_cache on a seperate drive

  - by pavs

  how can I set Apache mod_disk_cache on a separate drive from where the OS/Apache is installed? I have set up this on my apache2.conf: <IfModule mod_cache_disk.c> # cache cleaning is done by htcacheclean, which can be configured in # /etc/default/apache2 # # For further information, see the comments in that file, # /usr/share/doc/apache2/README.Debian, and the htcacheclean(8) # man page. # This path must be the same as the one in /etc/default/apache2 CacheRoot /media/cacheHD # This will also cache local documents. It usually makes more sense to # put this into the configuration for just one virtual host. CacheEnable disk / # The result of CacheDirLevels * CacheDirLength must not be higher than # 20. Moreover, pay attention on file system limits. Some file systems # do not support more than a certain number of inodes and # subdirectories (e.g. 32000 for ext3) CacheDirLevels 2 CacheDirLength 1 </IfModule> and it doesn't seem to be caching anything at all. The drive itself is a freshly installed ssd drive formatted with ext4.

  Read the article

• Best way to say "sync all system clocks to this server, when and ONLY when I say so?" Mixed setup of Windows+Linux servers.

  - by twblamer

  Title pretty much explains it. Let's say there's 100 servers, various versions of Windows and Linux, and one Windows server is the "master clock." I did look at this question: How do I synchronize clocks between Linux and Windows? This hints that ntp can do what I want if I run "ntpd -q" on a client (?). If I install ntp I also need to guarantee that it will only sync the times when I force it to. Even better if I have a log that tells me every time a sync was performed. I'm doing benchmark runs and I need to be able to say something like this: "Clocks were synced on all the benchmark systems at 09:42:01am on the master. A benchmark run was then initiated and allowed to run for six hours. None of the system clocks were altered during this time interval." I understand there is subsequent clock drift, but for now that's the way we're doing things and I'm doing it with a manual process. I'd rather at least automate the one-time sync.

  Read the article

• Oracle: 1 Large Server vs. 2 Smaller Servers?

  - by nvahalik

  We are in the planning stages of setting up our production Oracle 10gR2 environment. Our budget gives us the ability to buy 2 processor licenses of Oracle DB Standard Edition. We have minimal experience with Oracle so I'll defer to anyone who has used it. We are trying to decide if we should set up a single dual quad-core box or 2 individual quad-core boxes in a RAC configuration. Our DB right now is about 60 GB, and at our peak, we'll have up to 150 concurrent users. Most of the big stuff is done via batch processing at night. My gut tells me that having 2 boxes in a RAC configuration can't be a bad thing because it provides a true hardware failover solution. DB stored in a shared LUN on a SAN via iSCSI. Plus if we ever need to add capacity, we already have boxes in place that can be upgraded with extra procs (I assume with zero downtime, since it's set up in a RAC config) if we add extra licenses, or RAM. Does RAC have any performance penalties? Will it add extra latency? Is there any true advantage for having dual processor boxes running these systems? If we build out the Oracle boxes with special hardware: hardware iSCSI cards, TOE NICs, will these boxes be solid? We are deploying on 64-bit Windows. So what would you do? One box or two?

  Read the article

• Enterprise level Ticketing and inventory system reccomendations [closed]

  - by TrackingSystem

  My company is sort off at a stand still when it comes to our technician ticketing and inventory system. We currently use Numara TrackIt! - which isn't cutting it to say the least. Dell recommended KACE, but it's web based which is what we would like to avoid. We need a good ticketing and inventory system with the following: Server/Client setup Client supports XP/Windows 7 Ent. Web Based as well as Client is a plus Technician ticketing Active Directory integration Inventory System (Asset tag tracking etc/PO tracking) Exchange integrated - when tickets are made you have an option to send to the requester. Something that will scale well Please, if anyone is a Systems Admin or has knowledge regarding use of a great ticketing system please let me know. We have a large international corporation - price honestly isn't an issue. Keep in mind this will be mainly used for technicians to create tickets, enter inventory(track PCS) and possible even an option to track purchase orders. We want an enterprise level ticketing system with these capabilities please help! Thank you.

  Read the article

• Inexpensive (used) hardware for Xen virtualization test?

  - by Jason Antman

  Virtualization is one of the areas where I could really use some experience. I also run quite a few services (web, mail, dns, etc.) out of my home. Since most of my hardware is getting a bit old (I'm running on stuff that was surplused years ago...) I decided that it's about time I start renewing some things, and also play around with virtualization a bit more. My plan is to setup a SAN box (simple iSCSI target, relatively inexpensive gigE switch), get a pair (for starters) of new servers, and start building some new stuff with Xen, specifically planning on playing with live migration and full virtualization. Does anyone have recommendations for used, older "servers" (really anything in a rack-mount form factor, I'm not too worried about things like iLO/iLOM for the test nodes) that support VT-x/AMD-V? I'm biased to HP, but it looks like they didn't make Proliants with VT-x/Vanderpool processors until G6 (for the DL360) or so, which is way out of my price range. I'm looking in the sub-$300 range (or less, if possible), used, probably Ebay. Any recommendations are greatly appreciated. Edit:And, to catch this before the comments start coming - these are personal systems. I have first-generation Proliants still in use (I got them as corporate surplus in 05, they've been running since then, and probably were running since 01 or 02 prior to being sold). I don't need anything shiny and new - I've got a bunch of old boxes, at least one complete replacement for every model in use, and that's fine for me (and easy on the wallet).

  Read the article

• Which free RDBMS is best for small in-house development?

  - by Nic Waller

  I am the sole sysadmin for a small firm of about 50 people, and I have been asked to develop an in-house application for tracking job completion and providing reports based on that data. I'm planning on building it as a web application. I have roughly equal experience developing for MySQL, PostgreSQL, and MSSQL. We are primarily a Windows-based shop, but I'm fairly comfortable with both Windows and Linux system administration. These are my two biggest concerns: Ease of managability. I don't expect to be maintaining this database forever. For the sake of the person that eventually has to take over for me, which database has the lowest barrier to entry? Data integrity. This means transaction-safe, robust storage, and easy backup/recovery. Even better if the database can be easily replicated. There is not a lot of budget for this project, so I am restricted to working with one of the free database systems mentioned above. What would you choose?

  Read the article

• Is there a way to measure wifi traffic on a network from a client?

  - by millimoose

  Is there some way (preferrably one that comes with an existing tool) to measure the traffic going through the whole WiFi network from a computer connected to it? (That is, not from the AP or something between the modem and AP.) My situation is this: a few months back, the internet connection at my parent's place got really sluggish and laggy. (Lag spikes that cause page loads to time out etc, connections plain getting lost and dropping packets forever.) It's impossible to get mom's husband to do anything about this because he brushes this off with something like "just tell your sister to turn off torrents". Unfortunately the WiFi router's firmware doesn't do traffic logging. I'm not going to risk bricking it to put WRT on it; nor am I keen on rewiring the network to add a proxy to analyse the traffic. (I'm one of those people that make computers break just by looking at them, except machines I own.) I'd like to be able to find out roughly how much data is going over the air here while all the LAN wires are out of the router, all the computers accused of torrenting are off, etc. The idea is to either show that: Even if everything but my macbook is turned off, something is congesting the network. The husband is a systems developer and has a whole lot of mysterious hardware that's not to be touched around, one of them might be culprit. There is barely any traffic on the network, but the internet is still sluggish. Meaning this is likely a problem the ISP should solve. (Some hardware of theirs being glitchy, someone on an aggregated line hogging it constantly...) The network is encrypted, but I can temporarily set it to open for the sake of finding this out. So, in conclusion? Can this be done? Or is there some alternative way I could try to diagnose the problem?

  Read the article

• Data recovery on working hard drive

  - by emgee

  So I have a 5 bay hot swap SATA enclosure that's connected to a Silicon Image-based SATA adapter in a computer. It's running XP Pro. There are two 1.5TB hard drives in slots 1 and 2 respectively, set up using RAID 1 using the the Silicon Image utility. There are also two 1TB drives in bays 3 and 4, also set to RAID 1 the same way. The partitions for both RAID arrays are Dynamic partitions. A few days back, there was a bare hard drive that needed some files copied off of, so it was popped it in bay 5, that bay to pass-through, and the copied data off of it. Later, I noticed that my 1.5TB drives no longer showed up in windows. In the Silicon Image utility, the drives showed up fine, no error. However, in Device Manager, it shows the RAID 1 array as uninitialized. It shows up as the right size, etc., but nothing else. There's no sign of anything wrong with either drive, so I'm not sure what happened exactly. I'm not the only one who has access to that computer, so it is possible there is something else done to it that I don't know of. There's quite a lot of data on it still, and if at all possible, I'd prefer to not send it to Ontrack. Does anyone know of software that would restore the partitions, keeping in mind that it's a Windows LDM partition? I have access to a variety of Operating Systems, so something that would work on Mac, Windows or Linux would be acceptable. The programs I usually use are not compatible with LDM.

  Read the article

• [deb-5.0] Setup DNS on my server so I can put my IPs in as nameservers of my domain provider

  - by Maurycy Zarzycki

  Basically, my unmanaged VPS provider doesn't supply me with nameserver which I can use with my domain provider to route domain to my server. As I've been told: You need to configure the custom DNS server in your VPS, to setup the custom nameservers. Please refer the following article that would help: http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch18_:_Configuring_DNS Once you configure the nameserver records, please update the domain registrar panel with the custom nameserver details. I tried to follow this guide but it seems to be a bit outdated, and I am complete newb with non-windows systems. I also scanned the google for other articles which could help me with this problem but, alas, nothing I found was of any value for someone who doesn't know this stuff better than his own pockets. I realize this is quite a complex thing to do, but maybe there is some way to automate it? Or a better solution, like a paid service which would act as my nameservers (this one would be interesting), or even hoped to find some company which "rents" people to do stuff like that. Blah, any help will be appreciated, I am at a complete loss here. I can follow some of these steps, but then I soon find that half of the files which are mentioned in the article are somehow not existing anywhere on the server which confuses me, and once we get to the point of creating Zone I can't really decipher all the things written there :/. As per title, my system is Debian 5.0.

  Read the article

• [deb-5.0] Setup DNS on my server so I can put my IPs in as nameservers of my domain provider

  - by Maurycy Zarzycki

  Basically, my unmanaged VPS provider doesn't supply me with nameserver which I can use with my domain provider to route domain to my server. As I've been told: You need to configure the custom DNS server in your VPS, to setup the custom nameservers. Please refer the following article that would help: http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch18_:_Configuring_DNS Once you configure the nameserver records, please update the domain registrar panel with the custom nameserver details. I tried to follow this guide but it seems to be a bit outdated, and I am complete newb with non-windows systems. I also scanned the google for other articles which could help me with this problem but, alas, nothing I found was of any value for someone who doesn't know this stuff better than his own pockets. I realize this is quite a complex thing to do, but maybe there is some way to automate it? Or a better solution, like a paid service which would act as my nameservers (this one would be interesting), or even hoped to find some company which "rents" people to do stuff like that. Blah, any help will be appreciated, I am at a complete loss here. I can follow some of these steps, but then I soon find that half of the files which are mentioned in the article are somehow not existing anywhere on the server which confuses me, and once we get to the point of creating Zone I can't really decipher all the things written there :/. As per title, my system is Debian 5.0.

  Read the article

• Is there any equivalence of `--depth immediates` in `git`?

  - by ???

  Currently, I'm try to setup git front-end to the Subversion repository. My Subversion repository is a single large repository which consists of several co-related projects: svn-root |-- project1 | |-- branches | |-- tags | `-- trunk |-- project2 | |-- branches | |-- tags | `-- trunk `-- project3 |-- branches |-- tags `-- trunk Because it's sometimes needs to move files between different projects, so I don't want to break the repository to separate ones. I'm going to use git-svn to setup a git front-end, but I don't see how to exactly mapping the svn to git structure. The two systems treat branches and tags very different and I doubt it is possible. To simplify the problem, I would just git svn clone the whole root directory and let branches/tags/trunk directories just sit there. But this will definitely result in too many files in branches and tags directories. In Subversion, it's easy to just set the depth of checkout to immediates, which will only checkout the branch/tag titles, without the directory contents. but I don't know if this can be done in git. The git-svn messed me up. I hope there's more elegant solution.

  Read the article

• some HTTPS sites getting blocked on one machine in network

  - by shadowfoxmi

  I have a few computers connected to the internet via a router. I have been having some trouble with this one Windows 7 desktop. I can browse most of the sites without any trouble but some sites where the sign in page switches to a secure connection (https), the page does not load. It's not all of the sites though. I'm able to sign into gmail and a few other services that I know use https . The sites I'm having trouble with; yahoo's sign in page and the one that I have been using to test across different systems, http://iforgot.apple.com (which switchs to https) ;this particular site, i can access from other computers on the network and my phone. I only have windows firewall running and AVG. I even tried to stopping windows firewall but it did not help. Everything was fine last week. All I have installed in the past week is VOIP softwares namely skype, ooVoo and windows live messenger. I'm not sure how to find out what's being blocked and why and how to unblock it? Any suggestions would be greatly appreciated.

  Read the article

• Computer science undergraduate project ideas

  - by Mehrdad Afshari

  Hopefully, I'm going to finish my undergraduate studies next semester and I'm thinking about the topic of my final project. And yes, I've read the questions with duplicate title. I'm asking this from a bit different viewpoint, so it's not an exact dupe. I've spent at least half of my life coding stuff in different languages and frameworks so I'm not looking at this project as a way to learn much about coding and preparing for real world apps or such. I've done lots of those already. But since I have to do it to complete my degree, I felt I should spend my time doing something useful instead of throwing the whole thing out. I'm planning to make it an open source project or a hosted Web app (depending on the type) if I can make a high quality thing out of it, so I decided to ask StackOverflow what could make a useful project. Situation I've plenty of freedom about the topic. They also require 30-40 pages of text describing the project. I have the following points in mind (the more satisfied, the better): Something useful for software development Something that benefits the community Having academic value is great Shouldn't take more than a month of development (I know I'm lazy). Shouldn't be related to advanced theoretical stuff (soft computing, fuzzy logic, neural networks, ...). I've been a business-oriented software developer. It should be software oriented. While I love hacking microcontrollers and other fun embedded electronic things, I'm not really good at soldering and things like that. I'm leaning toward a Web application (think StackOverflow, PasteBin, NerdDinner, things like those). Technology It's probably going to be done in .NET (C#, F#) and Windows platform. If I really like the project (cool low level hacking), I might actually slip to C/C++. But really, C# is what I'm efficient at. Ideas Programming language, parsing and compiler related stuff: Designing a domain specific programming language and compiler Templating language compiled to C# or IL Database tools and related code generation stuff Web related technologies: ASP.NET MVC View engine doing something cool (don't know what exactly...) Specific-purpose, small, fast ASP.NET-based Web framework Applications: Visual Studio plugin to integrate with Bazaar (it's too much work, I think). ASP.NET based, jQuery-powered issue tracker (and possibly, project lifecycle management as a whole - poor man's TFS) Others: Something related to GPGPU Looking forward for great ideas! Unfortunately, I can't help on a currently existing project. I need to start my own to prevent further problems (as it's an undergrad project, nevertheless).

  Read the article

< Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >