Search Results

Search found 12084 results on 484 pages for 'django core'.

Page 335/484 | < Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >

• What affects video encoding speeds?

  - by Pig Head

  FRAPs doesn't compress its videos when you record, so the files are enormous. In a long recording you can get up to a few hundred gigabytes. Obviously, usually you would need to convert/compress them. What affects the speed of this? I don't think the RAM does, as when I converted 600 gb my RAM usage only went to 6 gig, but the processor was at 100%, which is surprising as I have a 6 core processor @ 3.46 ghz. Would clock speed or cores help the most?

  Read the article

• Snow Leopard Hangs at Login Window

  - by jessecurry

  I've had an issue for the past few months, but I rarely restart so it hasn't caused too much trouble. Basically, when I start up my Mac (iMac10,1 - 3.06GHz Intel Core 2 Duo, OS X 10.6.3) everything proceeds as usual until I reach the login window. The login window displays normally, but keyboard and mouse input seem to be ignored. This condition persists for around 5 minutes at which time everything goes back to normal. While the login window is frozen my second monitor appears entirely blue, the second monitor receives a background as soon as the login window becomes responsive. If I startup while holding SHIFT the problem still occurs, but the freeze is much shorter. Looking through my logs I see no activity during the time that the login window is frozen. I've attempted to repair disk permissions, and gone through every possible maintenance option in Cocktail.

  Read the article

• VMware Fusion / New Machine / verify VMs?

  - by drewk

  I just got a 15" MacBook Pro with 8GB RAM, 2.66 i7 and 500GB SSD. Very sweet and fast! My old machine was 2.66 Core 2 Duo. I used Migration Assistant to migrate my old MBP to the new. When I started VMware to run Windows and Ubuntu I got the message first This VM has been moved or copied to a new machine. Did you move or copy it? I answered Copied. Then I got the message this CPU is a different configuration than the machine that created the VM. You may get unpredictable results. I answered Open Anyway. Windows XP, Windows 7, and Ubuntu all seem to work OK, but how can I verify? Is there some form of test harness for a VM? I have had a VM degrade and become unusable with very catastrophic data loss (on Parallels...), so I am a bit paranoid. Thanks,

  Read the article

• Strange sound from Laptop, Microphone, Speakers or Soundcard?

  - by David Schilling

  I have recently purchased a second hand computer. There didn't seem to be anything wrong with it on purchasing, however recently I have noticed a small issue. Any time I play sound or listen through my headphones, I can hear what seems to be the CPU working (ie when beginning a new task, there is a small crackling). Also if I tap my laptop I can hear the sound louder, as if it is being picked up by the mic and then playing that sound in real time through the speakers or headphones. I have tried reading other topics but cannot find an answer to this question. These are the specs I am running on; Windows 7 Home Premium 32bit Pentium Dual Core CPU T4300 @ 2.10Ghz 2.10Ghz I hope someone can help me with this issue, it would be much appreciated.

  Read the article

• Memory limit on PHP + Apache + Windows 32 bit?

  - by thkala

  I am considering using Apache 32-bit for a Moodle installation on a Windows 2008 R2 64-bit/16GB server. Since the available memory affects the number of concurrent of users that can be served, I was wondering how the 2GB memory limit on 32-bit Windows processes affects Apache+PHP. Is it a collective limit for the whole server, or is it applied separately for each Apache child process/thread? If it is separate, how many of those children are launched on Windows? One per request? One per processor core? Something in the middle? Is this somehow configurable?

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Why is Windows Explorer not responding?

  - by William Barnes

  I am having the seemingy popular problem with Widows Explorer not responding. I have tried the AUTRUNS and turned off everything recommended. I have run SCANNOW 3 times and it comes back clean. When booting in safe mode it appears to work. I read someplace that the problem could be a service program, but can't remember where I read it or how to do it. Something about turning off all service programs and then turning them back on one at a time. The problem is I don't remember what it said to do. Any and all help is greatly appreciated. as an FYI here is my system stats Sorry I can't access that part of control panel right now because windows explore not responding. I have an HPdesk top with a AMD quad core processor 1.8GB 1.5TB sata drives (a 1TB and a 500GB) Nvidia 8400 graphics card a 2mb internet connetion wireless 2 DBD R?W drives. Any help is greatly apprciated

  Read the article

• how to stop powershell mangling command line options for program executed from shell?

  - by kem

  From the powershell prompt, when I try to run a program and feed it a command line option, powershell ends up mangling the option. Why does this happen? Is there any way to stop it besides enclosing the option in quotes? For example, from the powershell prompt: PS Microsoft.PowerShell.Core\FileSystem::\\mach\share .\myprog.exe -file=input.txt myprog.exe ends up getting two arguments: 1) -file=input 2) .txt I need to run it like: .\myprog.exe "-file=input.txt" or .\myprog.exe '-file=input.txt' to force it to be one argument. No other shell does this.

  Read the article

• ATI AMD Radeon 6670M 2GB Dual External monitors

  - by kellax

  I have HP Pavilion dv7 BeatsAudo model: dv7-6b with following specifications: CPU: Intel i7-2670QM ( Quad Core ) 8 CPU's @ 2.2Ghz RAM: 8GB @ 1066 GPU: ATI Radeon HD 6770M 1GB Notebook has two slots: HDMI and VGA On my VGA i have an external monitor 24" Samsung, any idea if my notebook could support a second external monitor as well. I do a lot of development work, i havent got a second monitor to test it yes but i know there can be problems. I would like to have a monitor connected on my VGA and on my HDMI so two external monitors and notebooks monitor. Would this be viable ?

  Read the article

• Need Boxee/Vista remote control recommendations

  - by gurun8

  I have an Acer Aspire X1200 (specs link below) desktop computer that I've installed Boxee on and it works great. And it looks like it's going to be a perfect computer for a media player. It's small with lots of hard drive space and even has a HDMI output on it. http://support.acer.com/acerpanam/desktop/0000/Acer/AspireX1200/AspireX1200sp2.shtml I also have a Harmony® 880 Advanced Universal Remote (specs link below) that I'd like to use with the Acer computer. www.logitech.com/en-us/440/372 My thought is that I need to get a USB remote control adapter, right? So I did a quick Google search and found products from $5 to hundreds of $$$. Does anyone have recommendations? Things you like/dislike about certain remotes? This Acer is running Vista and has a AMD LIVE!: Athlon X2 dual-core processor. 64 bit some times makes it a little more difficult. Thanks for the help.

  Read the article

• rsync to cifs mount but preserve permissions

  - by weberwithoneb

  I'm backing up a linux server to a windows share. I'm currently mounting the windows share with cifs and using rsync for incremental backups. File permissions and ownership are not being preserved, as should be expected after reading this samba document: The core CIFS protocol does not provide unix ownership information or mode for files and directories. Because of this, files and directories will generally appear to be owned by whatever values the uid= or gid= options are set, and will have permissions set to the default file_mode and dir_mode for the mount. How can I achieve my goal of preserving unix file permissions while writing to a windows share? Is there another network file system that would allow me to do this? Thanks.

  Read the article

• Is there any Mac Pro hardware parts that can ONLY be purchased thru Apple?

  - by bigp

  I'd like to know if I need to be concerned about any hardware parts that I should include in a brand new Mac Pro purchase, instead of trying to hunt it down on 3rd party vendors (or whitelist vendors / hardware suppliers). The main components I'm interested for "upgradeability" are: Processors (If starting with Two 2.4GHz Quad-Core "Westmere"); RAM (If starting with the least possible, which seems to be 6 x 1GB); Video Cards (If starting with one ATI Radeon HD 5770, can a 2nd one be purchased elsewhere?) Hard-Drives (Since these are mounted in specialized trays [if I'm not mistaking], are they also sold elsewhere? And can they be bought as SSDs?) Power Supply (Do I need to be concerned about this at all, or does it auto-adjust depending on the new component upgrades?) I just want to be sure by choosing a Mac Pro with lower component specifications that I can in fact purchase upgrade parts cheaper elsewhere. Thanks!

  Read the article

• RAID--0 " TWO " DRIVES SSD ONLY Should I use on-board / Software RAID OR a RAID Card / Control

  - by Wes

  I am looking at going with a TWO Drive Only SSD RAID-0 Configuration And was wondering if I would get better performance / Speed from the Use of a RAID Controller / Card Verses just using the Software RAID on my Mother Board. I have herd conflicting reports , Again I only Plan on Running " 2 " SSD Drives in RAID-0 Config I have No- problem spending the extra money for a good controller but only if I am going to benifit performance wise , Otherwise if there is no notable Gain I will just use the Software RAID that my HP-180-T came with Intel- 3.33 GHZ , 6-Core , 12-GB of DDR-3. I have a huge External drive for All Storage and am not concerned about Data loss just looking for pure speed. And if a Controller will benifit my performance Wht type of card would one suggest?

  Read the article

• teamviewer display is slow to refresh

  - by brunoais

  I'm using teamviewer from time to time to connect my portable computer with my desktop computer when I need to check on something (personal use). One of the main things I've been noticing is that it is quite slow transfering the screen updates that keep happening. This happens more frequently when I'm moving full windows or when I open a window or when watching a small movie clip. I've tested the lowest maximum p2p speed I ever got in the last week between both and it is the desktop's upload speed of 6MB/s with the ping of 40ms (usually ~15 ms). With this I was expecting to have very sharp image and fast transfer speeds which is not what is happening. Just to clarify, both computer's individual core's CPU is not reaching its peak (25%) while teamviewer is active, so the encryption and decryption is not the cause. Why my connection between both computers so slow?

  Read the article

• 250k connections for comet with node.js

  - by Nenad

  How to implement node.js to be able to handle 250k connections as comet server (client side we use socket.io)? Would the use of nginx as proxy/loadbalancer be the right solution? Or will HA-Proxy be the better way? Has anyone real world experience with 100k+ connections and can share his setup? Would a setup like this be the right one (Quad core CPU per server - start 4 Instances of node.js per Server?): nginx (as proxy / load balancing server) / | \ / | \ / | \ / | \ node server #1 node server #2 node server #3 4 instances 4 instances 4 instances

  Read the article

• How to troubleshoot slow powerconnect 62xx management interface

  - by Hannes

  Our Dell Powerconnect 62xx switches have a very high packetloss on the management interface. I presume this is caused by a new appliance which uses multicast for communication but I am not sure. Our network setup is following: servers a - Dell PC6248 | servers b - Dell PC6248 |- juniper core router servers c - Dell PC6248 | What we see is that the multicast traffic arrives at all servers (but only the servers b use the multicast) and I fear that this multicast traffic floods the switch management interface. The switches' management interfaces are reachable via vlan101, all other traffic is sent over other vlans. When I tcpdump on one of the 2 servers with a vlan 101 ip address, I only get a few arp requests but almost nothing. When I try to ping between these 2 servers, it works like a charm. I would like to know what a good way is to troubleshoot this problem and maybe help me understand what is going wrong on that subnet.

  Read the article

• What is a good router linux distro and WHY?

  - by madmaze

  I have a rather large home network with many clients. Ive decided I want to build a Linux based router, I have an 1.6Ghz dual-core(atom) system kicking around which will be re-purposed. So ive looked at a bunch of specific router distros but cant decide. I have also looked into taking a Ubuntu server or FreeBSD install and adding needed packages. So question is, what is the best router-Linux or base Linux distro and why? resources appreciated.

  Read the article

• let mysql use full resources

  - by shekhar

  We have a Windows server 2008 R2. It has 24GB RAM and 2.926 Mhz, 8 Core(s), 8 Logical Process. We have a large MySQL database and it's taking a lot of time to execute some queries. But while running queries, I have observed it's NOT utilizing full resources. I am thinking that if I let MySQL utilize maximum resources on my server, it can reduce execution time. How can I let my MySQL server utilize maximum resources in a healthy way?

  Read the article

• Computer Locks Up Completely When Resuming From Standby

  - by kcoppock

  Okay, so I'm having a strange issue lately with my desktop, and off the top of my head I'm not sure what the problem is, so I'm hoping for some ideas on how to track down the cause. First, my PC: AMD Phenom 9600 Quad-Core 2.4 GHz 4 GB DDR2 160 GB boot HDD 1 TB & 120 GB secondary HDD Nvidia GeForce 8600 GTS Windows 7 Professional 64-bit I have my power settings as follows: Turn off the display: 10 minutes Turn off hard disk: 20 minutes Sleep after: Never After a while, I'll come back to use my computer again, wiggle the mouse, and the screen comes back on like normal, but the desktop is unresponsive. I can move the cursor, but nothing responds to clicks or keyboard entry. If I click a few times with the mouse, the computer eventually locks up completely and the mouse cursor stops moving as well. After I restart, everything works just fine. Is there a log you recommend checking or really any suggestions would be welcome at this point. Thanks!

  Read the article

• Trouble with external monitor under Windows 7 on MacBook Pro Boot Camp

  - by Colm

  I'm running Windows 7 32-bit on a mid-2010 15" MacBook Pro Intel Core i5 under Boot Camp. I've had trouble getting it to work with my second display and searching Google for an appropriate answer has failed me. I'm on the latest version of Boot Camp - 3.2 - and have updated the drivers for the NVIDIA GeForce GT 330M. The monitor is connected via a VGA cable, and is a Dell ST2410. The monitor is recognised by Windows, which knows it's a Dell and its resolution. The desktop should be extended onto the second monitor - however nothing is showing. It remains black, though it doesn't show a lack of signal coming through which I would have expected. Any ideas what's wrong?

  Read the article

• CHROOT for shell script testing

  - by Josh

  I am looking at setting up a shell script in order to properly document and automate the process I am using to setup a few servers we have. In order to test the shell script through its different stages I was thinking a CHROOT would be ideal, since I can wipe out the "virtual root" and create it on the fly. I have never used CHROOT before, however. I was just curious what are the exact steps I would need to follow to implement this process of creating a chroot (with the basic core functions that would be needed to install apache/php/etc.)? and then destroying it?

  Read the article

• How can I use mobile network account at server so home sync works

  - by Mike Gallagher

  I would like to be able to use a mobile network account while sitting at my server. I had os x server 10.6 running on a mac mini server but recently got a new quad core iMac and want to take advantage of the extra power. My problem - I can sit at the server and log into the mobile network account but can not get it to sync back. When I attempt to sync it get error message that the afp share point is unavailable and that the files are hosted locally. My goal is to be able to use the new iMac as the server and set a user account so that it remains synced so when the account is accessed from other clients, particularly my macbook pro. Is mobile account the best route? Would an external account be a better option. Any advice or ideas of where to read up on this would be much appreciated.

  Read the article

• How to decide the optimal number of ruby thin/mongrel instances for a server, number of cores?

  - by Amala

  We are trying to deploy mongrel instances on a machine. What is the optimal number of mongrel instances for a server? Since an instance can handle concurrent connections, I do not see any benefit in starting more than 1 per core. Any more than that and the threads will just fight for CPU. Our predecessors have assigned 10 instances for 4 cores, but I think it will just cause CPU contention. Any definitive answers / opinions? I have seen this question: How many mongrel instances? But it is really not specific enough.

  Read the article

• VMware + SQL Server - sqlserver.exe not using both CPU cores

  - by fistameeny

  Hi, I am working on a virtual machine that runs SQL Server Express (as part of Sage Line 50 Manufacturing). The details are as follows: Physical Server (host machine) - Intel Xeon Quad Core 2.1GHz - 4GB RAM - VMDK image stored on RAID-5 500GB SATA drives (7200RPM) - Running Ubuntu 10.04 Server 64 bit - VMware Server 2 Virtual Machine - Windows Small Business Server 2003 - Allocated 2 vCPU's and 2GB RAM - Using 100GB pre-allocated flat VMDK file The problem I have is that there is process that runs in SQL Server that is CPU intensive. On the old physical server that we migrated to the virtual machine from, this would utilise both CPU cores so the sqlserver.exe process would be running 100% on each of the CPU cores. On the virtual machine, it only seems to use one of the two CPU cores, meaning that the process is much slower to run. Question Is there a way to force SQL Server (sqlserver.exe process) to use both of the CPU cores, and distribute it's load between them? Is this a VMware setting that needs changing to allow processes to use both cores?

  Read the article

< Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >