Search Results

Search found 14034 results on 562 pages for 'interface inheritance'.

Page 336/562 | < Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >

• Port based bandwidth shaping

  - by nixnotwin

  I have an interent connection with the speed of 4000k bits up and down. I want to do port based traffic shaping on a ubuntu machine, which acts as router. eth0 is the WAN interface. This is how I would like to allocate bandwidth: For ports 80 and 445 the bandwidth usage can go upto 90% For ports above 1024 upto 65535 the bandwidth usage can go upto 10% For remaining ports the bandwidth usage can go upto 40% The easiest way for achieving the above is using a router with tomato firmware. I have used it and it is very efficient. I want to try if it can be done on a Ubuntu or any GNU/Linux machine. I have googled extensively about the topic and I feel there isn't much information.

  Read the article

• switch's mgmt-ip is not remotely reachable.

  - by RainDoctor

  Switch model: Netgear FSM7352PS mgmt-ip: 192.168.1.100/24 Vlan id: 1 (default) There are couple of hosts in this Vlan: 192.168.1.2 (esxi console), for instance. 192.168.1.1 is the firewall/router interface. I can ping 192.168.1.1 and 192.168.1.2 from other vlans, say, 172.31.0.0/24 I can ssh to 192.168.1.2 from 172.31.0.0/24 I can't ping 192.168.1.100 from 172.31.0.0/24 However, I can ping 192.168.1.100 from 192.168.1.2 or from my laptop connected to that vlan (192.168.1.11). I can connect to the web GUI from my laptop when I am in that Vlan. Can anyone shed some light on why I am not able to connect from other vlans?

  Read the article

• WLAN LED randomly blinking when there is no traffic

  - by mrc

  Hi, I've got a Linksys WUSB54GC WLAN USB interface (Ralink chipset) and I'm running Debian GNU/Linux 6.0. The LED very often randomly blinks although there is no traffic in the network. I checked this with Wireshark. Sometimes, but rarely, the LED stops blinking. The issue is present in Ubuntu and Fedora too. It was not present in Debian Lenny with Linux 2.6.28. I checked an old live cd with ubuntu 8.10 with kernel 2.6.27 and it was also OK. So I guess that's an issue with Linux kernel and its wireless driver or firmware. Has anybody observed a similar thing? Does anybody know how to help this annoying blinking? Thanks.

  Read the article

• Cannot import video from a DV camcorder over FireWire

  - by qbeuek

  I have a JVC GR-D320 miniDV camcorder that has a FireWire interface. I recently upgraded to Windows 7 RTM (64 bit, fresh installation). When I connect my camcorder through FireWire, I can see it in Device Manager without any warnings or problems, but I cannot capture videos from my miniDV tapes. After connecting, AutoPlay displays "Import Video could not find a compatible digital video device. Verify that the digital video device is properly connected and turned on." When using Windows Live Photo Gallery after selecting the import option, my camera is not listed. The camera used to work perfectly on the same hardware before upgrading to Windows 7 RTM 64 bit (it used to work fine on Windows XP SP3 32 bit). Googleing revealed that people had the exact same problems in Vista, but no solution was provided. Any help?

  Read the article

• How to make VirtualBox headless answer on rdp port?

  - by stiv

  I'd like to run windows xp on RDP: $ VBoxManage modifyvm winxp32 --vrdeport 3389 $ VBoxHeadless -s winxp32 -v on Oracle VM VirtualBox Headless Interface 4.1.18_Debian (C) 2008-2012 Oracle Corporation All rights reserved. (waiting) in another window: $ telnet localhost 3389 Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused Yes, I've read about extension: $ sudo VBoxManage extpack install Oracle_VM_VirtualBox_Extension_Pack-4.1.20-80170.vbox-extpack 0%... Progress state: NS_ERROR_FAILURE VBoxManage: error: Failed to install "Oracle_VM_VirtualBox_Extension_Pack-4.1.20- 80170.vbox-extpack": Extension pack 'Oracle VM VirtualBox Extension Pack' is already installed. In case of a reinstallation, please uninstall it first Looked through all manuals and all help requests. No success. What's wrong? Any ideas?

  Read the article

• Cannot assign port 4 to WAN on TP-Link WR740N by DD-WRT wiki

  - by Victor Sergienko

  I'm following the DD-WRT instruction to get TP-Link WR740N v3's Port 4 on a different VLAN, but this doesn't happen. First, I have no "Setup VLANs" settinngs tab in DD-WRT v24-sp2 (07/20/12) std r19519. I can get Internet on Wi-Fi if assigning eth1 to "WAN Port", but then all Ethernet ports get on the same VLAN and any wired connection grabs the DHCP address and Internet connection from router. When following the "old" instruction, if I run, say, nvram set vlan2ports="2 5*", should there appear a new interface, vlan2, in ifconfig, after ifconfig vlan2 up? It doesn't - does it mean there is no support for different VLANs in my software/hardware? What am I missing? Is it impossible to create more VLANs on TP-Link740?

  Read the article

• WINEHQ - wine_gecko won't init - HTML Rendering disabled

  - by Nick

  Hello Super Users, I'm currently trying to get a windows compiled program to work through Wine to run on Linux and MacOSX. When I run the program through wine, it prompts me to install Gecko which I do. Later on in the program, it attempts to use MSHTML to render HTML but I get these error messages on my console instead. err:mshtml:init_xpcom NS_InitXPCOM2 failed: 80004005 err:mshtml:HTMLDocument_Create Failed to init Gecko, returning CLASS_E_CLASSNOTAVAILABLE fixme:ole:CoCreateInstance no instance created for interface {00000000-0000-0000-c000-000000000046} of class {25336920-03f9-11cf-8fd0-00aa00686f13}, hres is 0x80040111 I'm using Wine 1.1.34 and a similar bug was supposedly fixed in 1.1.33 http://bugs.winehq.org/show_bug.cgi?id=12578 I've been at this all afternoon, is there anything I'm missing? Thanks, Nick

  Read the article

• Use router as external high powered Wi-Fi adapter

  - by skywinder

  I need a powerful external Wi-Fi adapter for a couple of days. I heard that some types of router support this mode, allowing me to connect the router to my notebook and just use it as an external Wi-Fi interface. Is it possible to connect a router as an external Wi-Fi adapter? How can I determine it? Updated: My purpose is to set the router to monitor mode and check networks around through my notebook to provide better configuration for my network (power, channels, etc). My internal notebook Wi-Fi adapter is too weak for this purpose. Should I use special drivers for that? If yes, can someone describe, step-by-step, how to do it? p.s. I want to use ASUS RT-N56U as an external Wi-Fi adapter on OS X or Ubuntu.

  Read the article

• HTTP traffic through PIX VPN from outside site

  - by fwrawx

  I have a remote site with a website that only allows access from the outside IP assigned to our local PIX. I have users connecting to the local networking using a VPN that need to be able to view this remote site. I don't think this works because the packets want to come in and go out over the same (ext) interface. So I'm looking for a way to make this work using the PIX or setting up a service on a server on the local network to act as a middle-man for the HTTP requests. The remote site doesn't support setting up a VPN to our PIX. The remote website is dishing out pages over a non-standard port. Can I use squid or something similar to proxy just one site?

  Read the article

• Increase performance of Samsung 830 256GB SSD

  - by Robert Koritnik

  I have a Samsung 830 SSD in my notebook connected to a SATA interface. This is a rather old HP notebook nc8430 which means SATA is SATA I and not II or even III that disk supports. But SATA I still supports speeds up to 150MB/s so I expected at least double values as per image below. CrystalDiskMark shows rather slow performance: I've been using this SSD for over a year now and I would like to know what to do to make it blazingly fast as other reports say it should be? Edit As suggested I'm adding AS SSD screenshot of the test. And Samsung Magician's benchmark which is likely biased...

  Read the article

• iptables NAT configuration

  - by Sarp Kaya

  Hello I am experiencing some issues with my iptables. Here's what I want to do: A(eth0)--------(eth0)B(eth2)---------------(eth2)C Brackets are interface names A,B and C are hosts. Now I would like to forward port number 80 of host C so that It would be accessed via host A. host A is 192.168.1.254 host C is 192.168.3.2 I intentionally ACCEPTed all FILTER chain options as the default policy because I wanted to make sure that NAT is working properly first. I enabled ip_forward. So here's what I have done: sudo iptables -A PREROUTING -t nat -p tcp - d 192.168.1.254 -j DNAT --to 192.168.3.2 However it is not working. What am I missing here?

  Read the article

• PHP Apache XAMPP Run Multiple Scripts from CLI in Background

  - by Pamela

  How can I simultaneously run dozens of PHP scripts in the background from XAMPP's command line interface? Someone suggested a batch file, but when I tried executing this: start php 1.php start php 2.php start php 3.php It only opened a command prompt window; I closed that window, then two more command prompt windows opened up executing 2.php and 3.php. I want to run as many scripts as I want all simultaneously and all in the background. What is the best way to accomplish this, and how can it be done?

  Read the article

• How to add a broadcast address to loopback with ifconfig on a OS/X?

  - by chrisapotek

  I am trying to use ifconfig to turn on broadcast on my loopback interface. It currently reads: lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 As you can see, no broadcast address! :( :( :( I tried this on OS/X but it did not work and it did not give any error or feedback: ifconfig lo0 broadcast 127.255.255.255 Any guru would know that? I have one server that sends one packet. I have two clients running on the same machine as the server. I need them to pick up the packet WITHOUT having to force the server to send it twice.

  Read the article

• HP Proliant DL360 G5 + MSA50 RAID Setup recommendations

  - by JohnRB

  I am running a HP Proliant DL360 2 x 3GHz Xeon 16GB Ram P400 integrated RAID card with 6 x 73GB SAS HDDs running Ubuntu Server 14.04 CLI only. I recently got my hands on a MSA50 SAS Enclosure (10 x SAS HDD bays w/ SAS in/out interface) and wondering what you guys recommended as far as an addon raid controller for one of the pciex slots. I have both slots free Full and Half sizes. Any suggestions are greatly appreciated, I am an I.T. Consultant but have not used these particular units before so I was hoping to hear from someone who has. Thanks!

  Read the article

• How to connect SharePoint Online with Dynamics CRM Online using BDC?

  - by ripperus

  I try to connect SharePoint Online with Dynamics CRM Online using BDC. But without any results. I'll try to using Account's from CRM in SharePoint Online like a list. I mean - when I have 100 account's (customers) in CRM I want to export this account's to SharePoint Online like a list. And when I will bed edited account in CRM the elements in the list will be update (and when I edited element on SharePoint list it will update in CRM). Is there any possibility to connect in this way? If if what I should use - SharePoint Designer 2010, Visual Studio or do this on web interface?

  Read the article

• how to set static IP address in opensolaris

  - by pm100

  in closed solaris i knew how to do this. Edit /etc/inet/ipnodes, change /etc/defaultrouter, reboot in opensolaris there is not defaultrouter file. first thing I tried was System-admin-network switch to manual enter static address and netmask and gateway. press 'activate' "this interface cannot be activated". No error messages given. Close widget, open again. Now hangs for a minute and then closes try edit /etc/inet/ipnodes, reboot eth card not up. Network widget hangs then closes Works perfectly on DHCP

  Read the article

• D-Link DNS-323 NAS firmware update

  - by Mark Beaton

  Hi all, I've got a D-Link DNS-323 NAS enclosure holding a bunch of multimedia files that I've (possibly stupidly) just updated the firmware on, from 1.03 to 1.08. The updater indicated it applied the firmware patch successfully, but after rebooting it I can no longer get into it via the web interface, either via the static IP I had assigned it before the update, or by any of the DHCP-assigned addresses that I can see are currently assigned by my router. The unit just sits there, with the drives (2x512 set up as RAID-1) thrashing away seemingly forever... So, my question - has anyone had a similar experience with one of these units? Any advice etc? I've googled the hell out of it, and can't find anything useful.

  Read the article

• "MAS SMS-CDMA" Bluetooth service

  - by TuxRug

  I have my phone (LG Rumor Touch on Sprint) connected to my Windows 7 computer by Bluetooth. Usually, one of the services is unidentified and no driver is installed. Occasionally I have an issue that is solved by removing and re-pairing my phone with my computer. The last few times I have paired my computer and phone, the unidentified service was found and installed, as "MAS SMS-CDMA". It sounds like an interface that allows sending and reading SMS messages via Bluetooth. However, there is no software available from Sprint or LG that I have found that offers such functionality. Searching Google for "MAS SMS-CMDA" (with quotes) did not provide anything useful, only what appear to be CMDA information written in Spanish. What can I use this service for, and how do I use it?

  Read the article

• Serial converter - cat /dev/ttyUSB0 hangs on open

  - by Alex

  I am using Ubuntu 11.04 and attached a Garmin data cable. The device gets recognized [17718.502138] USB Serial support registered for pl2303 [17718.502181] pl2303 2-1:1.0: pl2303 converter detected [17718.513416] usb 2-1: pl2303 converter now attached to ttyUSB0 [17718.513443] usbcore: registered new interface driver pl2303 [17718.513446] pl2303: Prolific PL2303 USB to serial adaptor driver ... but when I do a strace cat /dev/ttyUSB0 it hangs on the open part and does not continue any more open("/dev/ttyUSB0", O_RDONLY|O_LARGEFILEC If I do the same on Ubuntu 12.04 it stops on fread(" ... ") which is okay, as there is currently no data comming in at this port. I am not sure if it is just a different configuration of the system or an driver related problem. How can I track this down further? Unfortunately I can not update the old Ubuntu 11.04 system for different reasons at the moment.

  Read the article

• Ubuntu 12.04 Server: permissions on /var/www for newly copied files

  - by Abe

  I ran the following commands to set up ACL on the /var/www folder in my Ubuntu 12.04 Server: sudo usermod -g www-data abe sudo chown -R www-data:www-data /var/www sudo chmod -R 775 /var/www I downloaded Wordpress using wget in my /var/www folder and unzipped the downloaded file: cd /var/www wget http://wordpress.org/latest.zip mv latest.zip wordpress.zip unzip wordpress.zip I created a new database and user in mysql and attempted to run the setup process through the web interface. When I enter the configuration info in wordpress I run into the following error message: Sorry, but I can't write the wp-config.php file. When I run ls -la, I see that the files are owned by my user abe, but they are part of the group www-data. Would I have to run the chmod command every time I copy new files to /var/www? sudo chmod -R 775 /var/www

  Read the article

• I used "autoconf6" (used to configure IPV6) on an AIX 6 target and I don't know how to change it back.

  - by newtoaix

  So I got curious and ran autoconf6 and now I can't figure out how to undo the changes that were made. I have tried using smitty to modify the en0 interface but have had no luck getting it back to it's old configuration. The old configuration of the aix 6 box was: en0: flags=5e080863,c0 inet 10.10.30.212 netmask 0xffffff00 broadcast 10.10.30.255 tcp_sendspace 131072 tcp_recvspace 65536 lo0: flags=e08084b inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255 inet6 ::1/0 tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1 then I ran autoconf6 and it was changed to: en0: flags=5e080863,c0 inet 10.10.30.212 netmask 0xffffff00 broadcast 10.10.30.255 inet6 fe80::214:5eff:fe96:b806/64 tcp_sendspace 131072 tcp_recvspace 65536 sit0: flags=8100041 inet6 ::10.10.30.212/96 lo0: flags=e08084b inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255 inet6 ::1/128 tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1 Any help would be awesome.

  Read the article

• How to enable RDP to a Server 2008 R2 on another network? VM network

  - by Saariko

  I have a W2008 R2 installed on a different network (I am on 192.168.0.x - new server on 192.168.3.x) I had trouble ping and RDP to it. I disabled the firewall to test the connection: and that opened the ping feature but I still can not RDP to that machine. the allow remote access is enabled As per sinni80 idea - Here is the error message The networks are divided by a Fortigate 60-B router - 2ndy interface for the gateway is 192.168.3.254 (and pingable from all) any to any rule on both networks is in place. As per Joe Schmoe idea - I am able to RDP to 192.168.3.1 from 192.168.3.3 (which is on the same network) Data to add: - The servers are on a VM host, each of the servers has 2 nics one is DHCP enabled into the 192.168.0.x network 2nd is static IP in the 192.168.3.x -- Further information: The network 192.168.0.x - are on a domain network (active Directory) The network 192.168.3.x - are grouped in a workgroup What should I check more please?

  Read the article

• How to set the IP address in a customized OpenWRT compilation

  - by Berdus

  I have been struggling today customizing OpenWRT. I checkout the stable using SVN, "make menuconfig" to customize the image, "make" it and run it on a router. Almost all my modifications work, except for the (Seemingly trivial) task of changing the default 192.168.1.1 address. I tried numerous files (scripts as well as config files) but I can't seem to change it (I can change it for a brief moment after boot using the "preinit" file, but after a few seconds it reverts to default). I suspect I should be setting it in the /etc/network file, but modifications there seem to be overwritten during boot. Maybe it has something to do with the br-lan interface? Does anybody have some thoughts on the subject? Thanks!

  Read the article

• How to tell if you are connected to Wireless B, G or N?

  - by Raheel Khan

  I am using Windows 7 on all wired desktops and wireless laptops in my home network. I recently upgraded my Ethernet switch to Gigabit and instantly noticed an increase in throughput in wired devices. I also bought a Wireless-N WAP but with degredation in wireless file transfer speeds. I have been told that a number of reasons could affect wireless speeds including which WAP is used, how many wireless devices are connected, which security mode is used, etc. However, that remains irrelevant to my question. Each of my laptops claim to support Wireless-N but I cannot seem to figure out how to determine if the laptops are truly running Wireless-N or are connected to the WAP through some sort of mixed-mode. I do not have control of the WAP device so cannot tell what mode it is running in. Is there a way to tell which mode is being used and what the throughput is for each connected device without having access to the WAP interface?

  Read the article

• How to enable CDR on AsteriskNow 1.5

  - by Michal Niklas

  I have upgraded PBX to Asterisk 1.6.2.7 and now CDR files are not created. It looks that such logging is disabled: Connected to Asterisk 1.6.2.7 currently running on pbx2 (pid = 5824) Verbosity is at least 3 pbx2*CLI> cdr show status pbx2*CLI> Call Detail Record (CDR) settings ---------------------------------- Logging: Disabled Mode: Simple Asterisk shows that CDR modules are loaded: pbx2*CLI> module show like cd Module Description Use Count cdr_manager.so Asterisk Manager Interface CDR Backend 0 cdr_csv.so Comma Separated Values CDR Backend 0 app_cdr.so Tell Asterisk to not maintain a CDR for 0 app_forkcdr.so Fork The CDR into 2 separate entities 0 func_cdr.so Call Detail Record (CDR) dialplan functi 0 cdr_custom.so Customizable Comma Separated Values CDR 0 6 modules loaded How to enable creating CDR csv files?

  Read the article

< Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >