Search Results

Search found 13318 results on 533 pages for 'svn config'.

Page 337/533 | < Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >

• RAID--0 " TWO " DRIVES SSD ONLY Should I use on-board / Software RAID OR a RAID Card / Control

  - by Wes

  I am looking at going with a TWO Drive Only SSD RAID-0 Configuration And was wondering if I would get better performance / Speed from the Use of a RAID Controller / Card Verses just using the Software RAID on my Mother Board. I have herd conflicting reports , Again I only Plan on Running " 2 " SSD Drives in RAID-0 Config I have No- problem spending the extra money for a good controller but only if I am going to benifit performance wise , Otherwise if there is no notable Gain I will just use the Software RAID that my HP-180-T came with Intel- 3.33 GHZ , 6-Core , 12-GB of DDR-3. I have a huge External drive for All Storage and am not concerned about Data loss just looking for pure speed. And if a Controller will benifit my performance Wht type of card would one suggest?

  Read the article

• Reimage several of the same model PC by copying the hard disk

  - by Tim Lehner

  I have several of the same machine (Dell Precision T3500) that originally came with Windows 7 Pro (there is a Windows 7 Pro OA product key sticker on top of each one). These were initially downgraded to XP by a former IT colleague, but are now back in the pool of unused machines. I am looking to format and install Windows 7 Pro on one of them using the latest official Win7 installer ISO with SP1 and then clone the hard drive to the other machines. The questions then, are: Does this even make sense, or is there a better way to do this considering I'm only doing it to 6 machines? Does this jive with MS licensing (we are the original purchaser of the machines, and thus, presumably, the license holder...but I'm no expert)? Is it possible to apply the individual 25-char product keys to the cloned machines after cloning? How far can I go in the config process (installing corporate standard apps and such) before I have to clone to the other machines considering the licensing/key questions?

  Read the article

• Setting subversion "password-stores" does nothing?

  - by Coderer

  The Subversion documentation says that I can set a parameter in ~/.subversion/config like [auths] password-stores = gnome-keyring to have it cache my certificate password in gnome-keyring. I set the option, and nothing happens -- no error messages, no change in behavior, nothing. Maybe I'm missing a log somewhere? I know subversion has to be compiled to support this but AFAIK I'm using the RPM version, which (they say...) ships with it rolled in. Is there a way to check whether my binary supports keyring? Shouldn't it say something if it doesn't?

  Read the article

• How can I whitelist a user-agent in nginx?

  - by djb

  I'm trying to figure out how to whitelist a user agent from my nginx conf. All other agents should be shown a password. In my naivity, I tried to put the following in before deny all: if ($http_user_agent ~* SpecialAgent ) { allow; } but I'm told "allow" directive is not allowed here (!). How can I make it work? A chunk of my config file: server { server_name site.com; root /var/www/site; auth_basic "Restricted"; auth_basic_user_file /usr/local/nginx/conf/htpasswd; allow 123.456.789.123; deny all; satisfy any; #other stuff... } Thanks for any help.

  Read the article

• change browser to open weblinks in thunderbird

  - by Bevor

  Hello, because it's almost obvious that either Thunderbird or Firefox freeze my whole system after some time, I'd like to not use FF at the moment and let Thunderbird run only for a short time as long as I check e-mails. Thunderbird web links should be opened with opera from now. For that I went in Thunderbird to Preferences-Advanced-General-Config Editor and set the following: network.protocol-handler.app.http -> /usr/bin/opera network.protocol-handler.app.https -> /usr/bin/opera network.protocol-handler.warn-external.ftp -> true network.protocol-handler.warn-external.http -> true network.protocol-handler.warn-external.https -> true Moreover I changed in Gnome in System-Preferences-Prefered Applications Opera as webbrowser and I checked in FF that it should warn if FF is not the default browser (obviously it isn't anymore). Unfortunately all of these settings doesn't work. Thunderbird still opens web links with FF. Any explantions why? (I already restarted Thunderbird although I don't have to, but no effect)

  Read the article

• Distributing application updates using SCCM 2007

  - by theraneman

  Hi all, If there are any System Center Config Manager (SCCM) users out there, please clarify my doubt here. I have used the ConfigMgr console to distribute a custom application to a client machine. Now I need to distribute some updated files of that application. Isnt's it possible to add those files in the same package source used earlier and advertise again? Or should I use the SCCM software update section for this? Not sure if its only me, but the Software distribution process looks much easier than the Software Updates process in SCCM 2007. Please do let me know if there any online tutorials which explain how to update a custom application. Any help much appreciated.

  Read the article

• Virtual hosting in Varnish with individual vcl files for configuration

  - by Michael Sørensen

  I wish to use varnish to put in front of an apache and a tomcat on the same server. Depending on the ip requested, it goes to a different backend. This works. Now for most of the sites the default varnish logic will work just fine. However for some specific sites I wish to use custom VCL code. I can test for host name and include config files for the specific domains, but this only works inside the individual methods recv etc. Is there a way to include a complete set of instructions, in one file, per domain, without having to manage separate files for subdomain_recv, subdomain_fetch etc? And preferably without running seperate instances of varnish. When I try to include a file on the "root level" of default.vcl, I get a compilation error. Best regards, Michael

  Read the article

• wildcard in httpd conf file?

  - by Joe

  Here is an example httpd config I'm currently using: <VirtualHost 123.123.123.123:80> ServerName mysite.com ServerAlias www.mysite.com DocumentRoot /home/folder </VirtualHost> I'm wondering, is it possible to have a wildcard for the ServerName & ServerAlias variable? Reason for asking is I have some software that is shared among multiple URL's all controlled in a CMS and it's kind of a pain to add new domains via ssh everytimee. And before someone points out a security hole, the software does check the current URL before doing any webpages :)

  Read the article

• Proper way to rotate Nginx logs

  - by depesz

  I would like to achieve rotation of nginx logs that: would work without any extra software (i.e. - best if without "logrotate") would create rotated files with names based on date Best approach is something like PostgreSQL has - i.e. in it's log_filename config variable I can specify strftime-style %Y-%m-%d, and it will automatically change log on date (or time) change. Another approach from apache - sending logs via pipe to rotatelogs program. As far as I was able to search - no such approach exists. All I can do, is to use logrotate with dateext option, but it has it's own set of drawbacks, and I'd rather use something that works like |rotatelogs or log_filename in PostgreSQL.

  Read the article

• How Can I prevent a specific application from being run on a specific machine using Group Policy?

  - by Mike

  I know this is possible to do and I am working on it with limited success. I believe the Group Policy I want is "Do Not Run Specified Windows Applications" - I can enable this and add the .exe I want to the list of programs not to be run. I have tried this on my local machine by running gpedit.msc going to User Config Admin Templates System and then choosing that policy and editing and enabling it. Doing it this way verifies that it works as I could then not run the specified .exe (XenAppWeb.exe) So this is great. I have created a GPO to do the same thing in GP Management on my domain controller where we centralize this, enforced it, applied it to an OU, and put one of our machines into this OU to test it. I have let it sit there for 3 days, run gpupdate /force, and when I try to run XenAppWeb.exe on this machine, it still lets me run it fine. What can I look at to troubleshoot this? I should note that I am trying to enact this policy on Windows XP machines (Virtual Machines) Thanks, Mike

  Read the article

• How do I update my servers' domain name for Reverse DNS?

  - by Jeff

  I'm updating my mail servers' rDNS and I think I have it all figured out except for one thing. When I installed my OS (Debian Etch), the installer asked me to enter the "domain name". Is the "domain name" updated by using the hostname command? If so, which config file(s) are updated when using the hostname command? If not, how do I change my servers' domain name? My current /etc/hosts: 127.0.0.1 localhost 67.228.178.164 mrspock.example-old.com mrspock My current /etc/hostname: mrspock $ hostname -f mrspock.example-old.com I need to update hostname -f to be mrspock.example-new.com.

  Read the article

• cant make outbound calls - asterisk

  - by deanvz

  I have a basic Atcom IP01 with the following config Registered Voip (SIP) Trunk Registered Voip Phone - ext Dial Plan Outbound Call rule I made use of this manual that the manufacturer supplies: http://www.atcom.cn/cn/download/pbx/ip01/ATCOM%20IP01-User%20Manual-V1.0-EN.pdf Whenever I try and make a call, it seems that the outbound call rule that i defined does not get regarded as the default rule even though the dial plan lists this as the only outbound call rule. When dialling I see in the log file the following [Jan 1 09:10:07] NOTICE[176]: chan_sip.c:14377 handle_request_invite: Call from '6001' to extension '00765243679' rejected because extension not found. The 00765243679 is a cellular number. Am I missing a configuration in order to make outbound calls? Land line, other Voip numbers and cellular calls have been tried

  Read the article

• FreeBSD after motherboard replacement; should I have any concerns?

  - by cc

  So after three years my motherboard (Asus M2N-0MX) has died off. As I go shopping for i's replacement tomorrow I have a concern about the data that I currently have on the drives wtihin. I'm currently running BSD 6.2, and am wondering if there would be any concern with installing a new OS on that system, would it be better to jsut install the latest BSD version, and are their any pitfalls that I should watch for to make sure I don't end up losing 750gb's of data. The setup consists of the following(to the best of my knowledge): Pioneer DVD drive 3ware RAID card four 250gb SATA drives in RAID 5 config thanks to anyone that can offer some advice, or just to confirm if I am over thinking things.

  Read the article

• gltail “Missing gem net-ssh”

  - by Ian

  I'm attempting to get gltail set up on my local system to monitor logs remotely. I've got all the dependencies installed, but when I go to run gltail ... ./gl_tail configfile ../config.yaml I get this output: Missing gem net-ssh. Ubuntu: sudo gem install -y net-ssh -r .. which I've done a number of times. Here is the output: dev@ubuntu:~/Desktop/Fudge-gltail-e5b252d/bin$ sudo gem install net-ssh Successfully installed net-ssh-2.0.15 1 gem installed Installing ri documentation for net-ssh-2.0.15... Installing RDoc documentation for net-ssh-2.0.15... But when I go to run it again, I get the same missing gem net-ssh error. dev@ubuntu:~/Desktop/Fudge-gltail-e5b252d/bin$ which ruby /usr/bin/ruby dev@ubuntu:~/Desktop/Fudge-gltail-e5b252d/bin$ which gem /usr/bin/gem Why isn't net-ssh being seen as properly installed?

  Read the article

• Connecting/Adding a private network on windows server 2008

  - by WhyMe

  Hey all, I have a dual server configuration on a host provider using VPS. I was told by my Host provider that in order to use free bandwidth between my two servers (they are in the same location) I need to add a alias "subnet" to a specific ip (A private network, VPN). How do I add an aliased ip in widnwos? in Linux the relevant command is supposed to be (By my search in blogs) "ifconfig eth0:1 10.129.175.165 netmask 255.255.255.0" They also said that another way to connect between the servers (should also be faster) is to use "private lan", but as it happens I don't know how to define one :(. Is there a windows equivalent or another way to do this? I have checked my ip config and found no indication of the private lan or the VPN ip.

  Read the article

• Proxychains tor + ssh tunnel

  - by linuxer

  Heelo, i have a problem with setting proxychains. I config file, when i set [ProxyList] # add proxy here ... # meanwile # defaults set to "tor" socks4 127.0.0.1 9050 It works well as tor, when i make an ssh tunnel on port 9051 and i use [ProxyList] # add proxy here ... # meanwile # defaults set to "tor" socks4 127.0.0.1 9051 It also works well with that ssh tunnel, but when i use this settings [ProxyList] # add proxy here ... # meanwile # defaults set to "tor" socks4 127.0.0.1 9050 socks4 127.0.0.1 9051 with both tor and ssh tunnel opened, it fails. Whats is wrong?

  Read the article

• Exim: Change sender address when sending mails out of local network

  - by Esa Varemo

  We have a working exim setup at a site, where users can send and receive mails. We are trying to setup a server to send some warnings and errors using email to an address that is outside the local network. The problem is: The program that sends the mails sends them using the username it runs under and the local hostname of the server. This cause the mails to have a sender of format: [email protected]. Exim sends these mails to the ISP's SMTP server, which rejects the mails as they have an illegal or unverifiable sender (the internal address). I'm thinking I should configure exim to rewrite the sender when: - sender's domain is on the local network - receiver's domain is outside the local network I tried setting some kind of rewriting in the exim config, but did not manage to get it to work. I'd show what I have tried, but I ran out of time on the last visit to the site, and had to revert to the original version losing all the changes I tried.

  Read the article

• Why is my ethernet interface in promiscuous mode

  - by nhed

  I read that seeing a flag of M in netstat -i is the way to tell which of your interfaces is in promiscuous mode I run it and I see that eth1 is in promiscuous mode $ netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth1 1500 0 1770161198 0 0 0 57446481 0 0 0 BMRU lo 16436 0 97501566 0 0 0 97501566 0 0 0 LRU This seems to be the case on all the machines I checked (All Centos6.0, both virtual and physical), any idea why ethernet devices would be in such a mode unless someone was running any pcap based app (sudo lsof | grep pcap shows nothing)? I did not see any mention of promiscuous in any of the config files (sudo grep -r promis /etc) Any ideas what puts the interface into that mode and why? p.s. most of the posts I see seem to be security related, this is not that

  Read the article

• Caching DNS server (bind9.2) CPU usage is so so so high

  - by Gk.

  I have a caching-only dns server which get ~3k queries per second. Here is specs: Xeon dual-core 2,8GHz 4GB of RAM Centos 5x (kernel 2.6.18-164.15.1.el5PAE) bind 9.4.2 rndc status: recursive clients: 666/4900/5000 About 300 new queries (not in cache) per second. Bind always uses 100% on one core on single-thread config. After I recompiled it to multi-thread, it uses nearly 200% on two core :( No iowait, only sys and user. I searched around but didn't see any info about how bind use CPU. Why does it become bottleneck? One more thing, here is RAM usage: cat /proc/meminfo MemTotal: 4147876 kB MemFree: 1863972 kB Buffers: 143632 kB Cached: 372792 kB SwapCached: 0 kB Active: 1916804 kB Inactive: 276056 kB I've set max-cache-size to 0 to make sure bind can use as much RAM as it want, but it always stop at ~2GB. Since every second we got not cached queries so theoretically RAM must be exhausted but it wasn't. Do you have any idea? TIA, -Gk

  Read the article

• Snow Leopard crashes my Xerox printer

  - by Ho Li Cow

  Just set up 2 brand new iMac 21.5" with OS X 10.6.2 pre-installed in our office. Now whenever we try to print an e-mail out, it re-sets the printer i.e. it switches off, does a POST and prints out a Printer Config page. I can print web pages and from other apps fine, just Apple Mail seems to be suffering. Printer is a Xerox Phaser 7750. I downloaded the drivers it recommended when i first tried printing which didn't help and then also tried downloading from the Xerox site. The latter seemed to install fine but then right at the end, it would say 'Installation Successful', then ask me to choose a printer (it found it fine, both by Bonjour and Raw TCP - i tried both) and then it would give an error message. Any help appreciated.

  Read the article

• Can Autodesk Flame run with an nVidia Quadro FX3800 SDI and output to preview through SDI???

  - by cragno

  I am running on Linux RHEL 4.3, DKU 5.0.1. Everything seems to be ok on the xorg.conf and init.cfg, but when I start my projects and Flame enables output to preview I start having preview on my SDI monitor and stop seeing on my main monitor (which is connected to the DisplayPort). Could it be posible that Flame needs Quadro FX4x00/5x00 series with dual DVI to output both monitors?? Cause the FX3800 has only one DVi (which is connected to the SDI card) and 2 DisplayPorts as additional output monitors. Anyone knows a config or workaround this problem?? Thanks ahead!!!

  Read the article

• Team City Backup from Rest API doesn't backup

  - by ChrisFletcher

  I'm using the REST API in Team City 6.5 to request a backup is created as follows: http://teamcity:8111/httpAuth/app/rest/server/backup?includeConfigs=true&includeDatabase=true&includeBuildLogs=true&fileName=filename as specified in the documentation here: http://confluence.jetbrains.net/display/TW/REST+API+Plugin#RESTAPIPlugin-DataBackup The problem is that it simply returns "idle", as does the backup status call and no backup appears. I can backup fine from the web interface and I can return a list of users from the REST API without issue also. I'm starting to suspect there is some sort of permission or config option but I can't find one.

  Read the article

• I don't see the running guest in virsh

  - by Louise Hoffman

  Using CentOS 5 with KVM. I have downloaded this KVM applicance, and when unzipped it is just a .img file. No xml file supplied. I can start the guest with /usr/libexec/qemu-kvm -hda /data/kvm/slash.img -m 512 and it works. Now I would like to make a config file for the guest. The problem is when I do # virsh -c qemu:///system list Id Name State ---------------------------------- # I don't see the guest as expected. Does anyone know what is wrong?

  Read the article

• How to save a document and close it after the save

  - by Le Questione

  Currently I have a .bat file that opens a program, opens a document and then reloads this document so it contains new data. After that I need a timeout so it can run some other things within the document which takes about 2 minutes in total, but for safety I used 5 minutes. Then I want it to save the document and close the program. I've searched a lot for this but I can't find anything that saves the document and then closes it. Only can find how to save a bat file, but I already have that! CD /D "D:\01 - Config\02 - Developer" start qv.exe /l "D:\02 - Content\07 - Accesspoint\tracktrace.qvw" timeout /t 300 ???? exit 0 Please advise, thanks

  Read the article

• Windows 7 - Windows 8 dual boot installation error

  - by Nikhil

  I am trying to dual boot Windows 8 with Windows 7 . But I keep getting an error while selecting the drive to install on . The error is ""Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information." " . What might be the problem ? Also previously I tried to install only Windows 7 on my HDD . I downloaded the ISO from digital river . Made bootable usb . I got the same above error . But when I tried to install it via other usb which had pirated Windows 7 downloaded from torrents it gave no error . My system config is Motherboard - Gigabyte G41 MT S2P HDD - 160 GB SATA RAM - 8 GB Help !!!

  Read the article

< Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >