Search Results

Search found 10931 results on 438 pages for 'struts config'.

Page 339/438 | < Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >

• Raid-z unaccessible after putting one disk offline

  - by varesa

  I have installed FreeNAS on a test server, with 3x 1Tb drives. They are setup in raidz. I tried to offline one of the disks (from the FreeNAS web-ui), and the array became degraded, as I think it should. The problem is with the array becoming unaccessible after that. I thought a raid like that should be able to run fine with one of the disks missing. Atleast very soon after I offline'd and pulled out the disk, the iSCSI share disappeared from a ESXi host's datastores. I also ssh'd into the FreeNAS server, and tried just executing ls /mnt/raid (/mnt/raid/ being the mount point). The whole terminal froze, not accepting ^C or anything. # zpool status -v pool: raid state: DEGRADED status: One or more devices are faulted in response to IO failures. action: Make sure the affected devices are connected, then run 'zpool clear'. see: http://www.sun.com/msg/ZFS-8000-HC scrub: none requested config: NAME STATE READ WRITE CKSUM raid DEGRADED 1 30 0 raidz1 DEGRADED 4 56 0 gptid/c8c9e44c-08e1-11e2-9ba6-001b212a83ea ONLINE 3 60 0 gptid/c96f32d5-08e1-11e2-9ba6-001b212a83ea ONLINE 3 63 0 gptid/ca208205-08e1-11e2-9ba6-001b212a83ea OFFLINE 0 0 0 errors: Permanent errors have been detected in the following files: /mnt/raid/ raid/iscsivol:<0x0> raid/iscsivol:<0x1> Have I understood the workings of a raidz wrong, or is there something else going on? It would not be nice to have the same thing happen on a production system...

  Read the article

• how could application installations/configurations be easier in linux?

  - by ajsie

  although you can do anything in linux it tends to require a lot of tweaking in config files and reading a lot of manuals/tutorials before you can have it running in your way. i know that it gets a lot easier by time, and the apt-get installations with ubuntu/debian is heading the right way. but how can linux be more userfriendly for us in the future? i thought that if more is automated like an IDE environment, eg. typing svn will give us all the commands and description about each command when you move between commands with your keyboard. that would be great. but that's just one example. another is the navigation in the terminal between folders. now you have to type a lot just to jump from/to different folders. would be great with some more automatization here too. i know that these extra features will slow down the server, but its 2010 now, and these features are not that heavy for the cpu, but makes it more userfriendly and encourage maintainance of a server, not frighten u off. what do you think about this? should/could we have more user friendly linux environment in servers, something that has annoyed you a lot? a lot of things are done in the unix way, but maybe we should reinvent the wheel in some areas, cause apparently, its so...repeatingly today and difficult to do easy tasks. it should be easier i think..

  Read the article

• iptables to block non-VPN-traffic if not through tun0

  - by dacrow

  I have a dedicated Webserver running Debian 6 and some Apache, Tomcat, Asterisk and Mail-stuff. Now we needed to add VPN support for a special program. We installed OpenVPN and registered with a VPN provider. The connection works well and we have a virtual tun0 interface for tunneling. To archive the goal for only tunneling a single program through VPN, we start the program with sudo -u username -g groupname command and added a iptables rule to mark all traffic coming from groupname iptables -t mangle -A OUTPUT -m owner --gid-owner groupname -j MARK --set-mark 42 Afterwards we tell iptables to to some SNAT and tell ip route to use special routing table for marked traffic packets. Problem: if the VPN failes, there is a chance that the special to-be-tunneled program communicates over the normal eth0 interface. Desired solution: All marked traffic should not be allowed to go directly through eth0, it has to go through tun0 first. I tried the following commands which didn't work: iptables -A OUTPUT -m owner --gid-owner groupname ! -o tun0 -j REJECT iptables -A OUTPUT -m owner --gid-owner groupname -o eth0 -j REJECT It might be the problem, that the above iptable-rules didn't work due to the fact, that the packets are first marked, then put into tun0 and then transmitted by eth0 while they are still marked.. I don't know how to de-mark them after in tun0 or to tell iptables, that all marked packet may pass eth0, if they where in tun0 before or if they going to the gateway of my VPN provider. Does someone has any idea to a solution? Some config infos: iptables -nL -v --line-numbers -t mangle Chain OUTPUT (policy ACCEPT 11M packets, 9798M bytes) num pkts bytes target prot opt in out source destination 1 591K 50M MARK all -- * * 0.0.0.0/0 0.0.0.0/0 owner GID match 1005 MARK set 0x2a 2 82812 6938K CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 owner GID match 1005 CONNMARK save iptables -nL -v --line-numbers -t nat Chain POSTROUTING (policy ACCEPT 393 packets, 23908 bytes) num pkts bytes target prot opt in out source destination 1 15 1052 SNAT all -- * tun0 0.0.0.0/0 0.0.0.0/0 mark match 0x2a to:VPN_IP ip rule add from all fwmark 42 lookup 42 ip route show table 42 default via VPN_IP dev tun0

  Read the article

• Server getting overloaded

  - by taras

  Hi, I have 2 setups tomcat5.5.20 on Redhat and mysql 4.1.22 on another Redhat server. Recently my webserver started getting overloaded up to 80-90%. After checking i found repeating errors(each seconds) in catalina.out. Can it cause the server overload or where else can be the root of the problem ? catalina.out: DBCP object created 2010-12-22 13:33:12 by the following code was never closed: java.lang.Exception at org.apache.tomcat.dbcp.dbcp.AbandonedTrace.init(AbandonedTrace.java:96) i have to restart tomcat once a day when server load reaches 80-90%. Also catalina.out file is growing too fast which every few hours need to clear the logs. My datasource config: <bean id="myDataSource" class="org.apache.tomcat.dbcp.dbcp.BasicDataSource" destroy-method="close"> <property name="driverClassName"> <value>com.mysql.jdbc.Driver</value> </property> jdbc:mysql://XXX/XXX?autoReconnect=true 20 20 <property name="maxIdle"> <value>50</value> </property> <property name="maxActive"> <value>50</value> </property> <property name="removeAbandoned"> <value>false</value> </property> <property name="removeAbandonedTimeout"> <value>2400</value> </property> <property name="username"> <value>XXX</value> </property> <property name="password"> <value>XXX</value> </property> </bean> Thanks for any direction.

  Read the article

• Code to update HyperV Export file

  - by Andy Schneider

  I am using the HyperV Module from Codeplex to do a "config only" export from a 2008R2 Hyper-V server. In order to import the configuration on another HyperV server, I need to edit the value of CopyVMStorage in the EXP file. This file is an XML file. I wrote the following code in PowerShell to do the update for me. The variable $existing is the existing exp file. $xml = [xml](get-content $existing) $xpath = '//PROPERTY[@NAME ="CopyVmStorage"]' foreach ($node in $xml.SelectNodes($xpath)) {$node.Value = 'TRUE'} $xml.Save($existing) This code makes the correct changes to the XML. However, when I go to import the file on the Hyper-V server, I get an error that says the file format is incorrect. I am wondering if the encoding of the file is incorrect or if there is something else going on. If I edit the file manually in wordpad, it imports without an issue. The filename is a GUID with a .exp extension, and it appears that the file name is too long for notepad to open. Notepad throws an error trying to open the file, which is why I went with WordPad. I have noticed that the file that is updated with PowerShell comes out formatted whereas the raw file is xml all bunched together with no whitespace. Any ideas on what "file format" means in this HyperV error message and how I might be able to use my code to automate this change in the XML without changing the file format?

  Read the article

• Problems forwarding zone to another DNS server.

  - by sebastian nielsen

  I have a authorative DNS server at 83.248.21.18 which are authorative for the domain "finahemgoteborg.se". Now my registrar is requiring me to have 2 DNS servers for the domain, so I would now want the machine 85.228.103.141 just forward all incoming queries for "finahemgoteborg.se" to the 83.248.21.18 server. In the 85.228.103.141 BIND server, I have the following config: zone "finahemgoteborg.se" in { type forward; forwarders {83.248.21.18;}; }; But the problem is that 85.228.103.141 is still responding with "REFUSED" when querying it for example www.finahemgoteborg.se A record. How can I fix it. I do NOT want to set up a master/slave situation, just one nameserver that forwards to a another. Edit The Rest of named.conf: options { directory "/var/cache/bind"; version "none"; allow-recursion {"none";}; minimal-responses no; }; zone "sebn.us.to" in{ type master; file "/etc/bind/sebn.us.to"; }; zone "ns1sebn.us.to" in{ type master; file "/etc/bind/sebn.us.to"; }; zone "ns2sebn.us.to" in{ type master; file "/etc/bind/sebn.us.to"; }; zone "finahemgoteborg.se" in{ type forward; forwarders {83.248.21.18;}; };

  Read the article

• memory tuning with rails/unicorn running on ubuntu

  - by user970193

  I am running unicorn on Ubuntu 11, Rails 3.0, and Ruby 1.8.7. It is an 8 core ec2 box, and I am running 15 workers. CPU never seems to get pinned, and I seem to be handling requests pretty nicely. My question concerns memory usage, and what concerns I should have with what I am seeing. (if any) Here is the scenario: Under constant load (about 15 reqs/sec coming in from nginx), over the course of an hour, each server in the 3 server cluster loses about 100MB / hour. This is a linear slope for about 6 hours, then it appears to level out, but still maybe appear to lose about 10MB/hour. If I drop my page caches using the linux command echo 1 /proc/sys/vm/drop_caches, the available free memory shoots back up to what it was when I started the unicorns, and the memory loss pattern begins again over the hours. Before: total used free shared buffers cached Mem: 7130244 5005376 2124868 0 113628 422856 -/+ buffers/cache: 4468892 2661352 Swap: 33554428 0 33554428 After: total used free shared buffers cached Mem: 7130244 4467144 2663100 0 228 11172 -/+ buffers/cache: 4455744 2674500 Swap: 33554428 0 33554428 My Ruby code does use memoizations and I'm assuming Ruby/Rails/Unicorn is keeping its own caches... what I'm wondering is should I be worried about this behaviour? FWIW, my Unicorn config: worker_processes 15 listen "#{CAPISTRANO_ROOT}/shared/pids/unicorn_socket", :backlog = 1024 listen 8080, :tcp_nopush = true timeout 180 pid "#{CAPISTRANO_ROOT}/shared/pids/unicorn.pid" GC.respond_to?(:copy_on_write_friendly=) and GC.copy_on_write_friendly = true before_fork do |server, worker| STDERR.puts "XXXXXXXXXXXXXXXXXXX BEFORE FORK" print_gemfile_location defined?(ActiveRecord::Base) and ActiveRecord::Base.connection.disconnect! defined?(Resque) and Resque.redis.client.disconnect old_pid = "#{CAPISTRANO_ROOT}/shared/pids/unicorn.pid.oldbin" if File.exists?(old_pid) && server.pid != old_pid begin Process.kill("QUIT", File.read(old_pid).to_i) rescue Errno::ENOENT, Errno::ESRCH # already killed end end File.open("#{CAPISTRANO_ROOT}/shared/pids/unicorn.pid.ok", "w"){|f| f.print($$.to_s)} end after_fork do |server, worker| defined?(ActiveRecord::Base) and ActiveRecord::Base.establish_connection defined?(Resque) and Resque.redis.client.connect end Is there a need to experiment enforcing more stringent garbage collection using OobGC (http://unicorn.bogomips.org/Unicorn/OobGC.html)? Or is this just normal behaviour, and when/as the system needs more memory, it will empty the caches by itself, without me manually running that cache command? Basically, is this normal, expected behaviour? tia

  Read the article

• A lots of Apache processes are using my CPU uses always more than 70%

  - by Barkat Ullah

  I am running a plesk panel in 1and1. I have 120 sites running and all are using pligg cms, each site has 600 visitors per day. Please see the details of my server below: HDD-1000GB RAM-16GB Processor-6 Core I always see a lot of apache processes running in my # top view, so the server seems overloaded. If I can reduce the amount apache processes I think the server will be ok. But I don't know why too many apache processes are running. Please see the link below for the screenshot of my # top view: http://dl.dropbox.com/u/26967109/%23Top-2.jpg Sometimes I saw too many connection error in my plesk control panel, so I added the below line in my [mysqld] section: set-variable=max_connections=416 But I didn't find a solution yet. I have also added maxclients and serverlimit 416 in the config /etc/httpd/conf/httpd.conf But no solution yet. I am researching around more than 7 days but don't get any solution. Please help me to solve the problem. In peak hours my sites are taking too much time to load, but off-peak hour it is ok. Please help me to find out the actual problem.

  Read the article

• Unable to access newly created web site in IIS 7.5

  - by Animesh

  Configuration: 32-bit Windows 7 development machine with IIS 7.5 I created a new web site in IIS to host only MVC sites called MVCHOST. The physical path to this website is set as C:\inetpub\mvcroot. I created a new v4.0 pool called mvcpool for this purpose. I have given Modify rights to IIS_WPG, IIS_IUSRS, ASPNET accounts. I created this web site with a host header "mvchost" and port 80, in the hopes of browsing MVC sites in the following way: mvchost/mvcapp1 mvchost/mvcapp2 instead of localhost/mvcapp1 localhost/mvcapp2 The only binding I set is the default one: http:*:80:mvchost. I have also copied the files iisstart.htm, web.config, welcome.png and folder aspnet_client from wwwroot over to mvcroot. Now when I try to the browse this site from IIS manager, I get the following error: This webpage is not available If I leave out the host header and give some port, say 99, I can access this website at localhost:99. What am I missing here? Why am I unable to access the web site at: http://mvchost/?

  Read the article

• Apache: redirect to https before AUTH for server-status

  - by Putnik

  I want to force https and basic auth for server-status output (mod_status). If I enable auth and user asks for http://site/server-status apache first asks for pass, then redirects to httpS, then asks for pass again. This question is similar to Apache - Redirect to https before AUTH and force https with apache before .htpasswd but I cannot get it work because we are speaking not about generic folder but Location structure. My config (shortly) is as follows: <Location /server-status> SSLRequireSSL <IfModule mod_rewrite.c> RewriteEngine on RewriteBase /server-status RewriteCond %{HTTPS} off RewriteCond %{SERVER_PORT} 80 RewriteRule ^ - [E=nossl] RewriteRule (.*) https://site/server-status} [R=301,L] </IfModule> SetHandler server-status Order deny,allow Deny from all Allow from localhost ip6-localhost Allow from 1.2.3.0/24 Allow from env=nossl AuthUserFile /etc/httpd/status-htpasswd AuthName "Password protected" AuthType Basic Require valid-user Satisfy any </Location> I assume Allow from env=nossl should allow everyone with RewriteCond %{HTTPS} off and server port 80, then force it to redirect but it does not work. Please note, I do not want force to SSL the whole site but /server-status only. If it matters the server has several sites. What am I doing wrong? Thank you.

  Read the article

• Need help trying to diagnose Symmetrix SAN performance issues

  - by arcain

  I am helping to benchmark hardware for a new SQL Server instance, and the volume presented to the OS for the data files is carved from a set of spindles on a Symmetrix SAN. The server has yet to have SQL Server installed, so the only activity on the box is our benchmarking. Now, our storage engineers say that this volume and it's resources are dedicated to our new server (I don't have access to see the actual SAN config) however the performance benchmarks are troubling. For example, the numbers look good until suddenly, and randomly, we see in our IO benchmarking tool wait times of 100 seconds, and disk queue lengths of 255 in perfmon. This SAN has an 8 GB cache, plus there are other applications besides ours that use the SAN. I'm wondering if (even though the spindles for our volumes should be dedicated to us) the cache may be getting hammered during the performance testing, or perhaps the spindles our volumes are on aren't really dedicated to us. We're not getting much traction from our storage engineers in helping us track down the problem, so if anybody has experience with diagnosing a problem like this and would like to share insights and troubleshooting methodologies, I'd appreciate it.

  Read the article

• Enable gzip on Nginx

  - by Rob Wilkerson

  Yes, I know that there are a lot of other questions that seem exactly like this out there. I think I must've looked all of them. Twice. In desparation, I'm adding another in case my specific configuration is the issue. Bear with me. First, the question: What do I need to do to get gzip compression to work? I have an Ubuntu 12.04 server installed running nginx 1.1.19. Nginx was installed with the following packages: nginx nginx-common nginx-full The http block of my nginx.conf looks like this: http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "msie6"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } Both PageSpeed and YSlow are reporting that I need to enable compression. I can see that the request headers indicate Accept-Encoding:gzip,deflate,sdch, but the response headers do not have the corollary Content-Encoding header. I've tried various other config values (gzip_vary on, gzip_http_version 1.0, etc.), but no joy. As far as I know, I can only assume that nginx was compiled with compression support, but if there's any way to verify that, I'd love to know. If anyone sees anything I'm missing or can suggest further debugging, please let me know. I'm no sysadmin and I'm new to Nginx so I've exhausted everything I can think of or have read. Thanks.

  Read the article

• Windows Network File Transfer to Samba server: “Are you sure you want to copy this file without its properties?”

  - by jimp

  I am transferring a lot of files to a new NAS based on OpenMediaVault, with the Samba 3.5.6 service running. I am transferring from Windows 7 64-bit to the NAS, and on some media files Windows is prompting about losing some property data across the transfer. I have never seen this before when transferring to Samba boxes I have built myself (vs this turnkey solution), so I'm guessing there must be a Samba setting I can change to preserve the file properties in question instead of permanently losing whatever they contain (Date Taken? Exposure? Flash Fired? etc). Or maybe I've just never encountered this before; I'm really not sure. I tried adding ea support = yes and store dos attributes = yes to the [global] section, but the problem remains. The Linux file system is ext4 mounted with user_xattr (full options: defaults,acl,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0) as Samba requires. Any ideas would be greatly appreciated. Thank you! Samba config: [global] workgroup = WORKGROUP server string = %h server include = /etc/samba/dhcp.conf dns proxy = no log level = 2 syslog = 2 log file = /var/log/samba/log.%m max log size = 1000 syslog only = yes panic action = /usr/share/samba/panic-action %d encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = no passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes socket options = TCP_NODELAY IPTOS_LOWDELAY guest account = nobody load printers = no disable spoolss = yes printing = bsd printcap name = /dev/null unix extensions = yes wide links = no create mask = 0777 directory mask = 0777 use sendfile = no null passwords = no local master = yes time server = yes wins support = yes ea support = yes store dos attributes = yes Note: I found this related question, but it explains the loss due to the user trying to transfer from NTFS to FAT32.

  Read the article

• 500 Internal Server Error when setting up Apache on localhost

  - by Martin Hoe

  I downloaded and installed XAMPP, and to keep my projects nicely separated I want to create a VirtualHost for each one based on its future domain name. For example, in my first project (we'll say it's project.com) I've put this in my Apache configuration: NameVirtualHost 127.0.0.1 <VirtualHost 127.0.0.1:80> DocumentRoot C:/xampp/htdocs/ ServerName localhost ServerAdmin admin@localhost </VirtualHost> <VirtualHost 127.0.0.1:80> DocumentRoot C:/xampp/htdocs/sub/ ServerName sub.project.com ServerAdmin [email protected] </VirtualHost> <VirtualHost 127.0.0.1:80> DocumentRoot C:/xampp/htdocs/project/ ServerName project.com ServerAdmin [email protected] </VirtualHost> And this in my hosts file: # development 127.0.0.1 localhost 127.0.0.1 project.org 127.0.0.1 sub.project.org When I go to project.com in my browser, the project loads up successfully. Same if I go to sub.project.com. But, if I navigate to: http://project.com/register (one of my site pages) I get this error: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. The error log shows this: [Sun May 20 02:05:54 2012] [error] [client 127.0.0.1] Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace., referer: http://project.com/ Sun May 20 02:05:54 2012] [error] [client 127.0.0.1] Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace., referer: http://project.com/ Any idea what config items I got wrong or how to get this working? It happens on any page that's not in in the root directory of project.com. Thanks.

  Read the article

• Apache Proxy and Rewrite, append directory to URL

  - by ionFish

  I have a backend server running on http://10.0.2.20/ from the local network, which serves similar to this: / (root) | |_user1/ | |_www/ | |_private/ | |_user2/ |_www/ |_private/ (etc.) Accessing http://10.0.2.20/user1/ of course, contains 'www' and 'private' folders and is proxied through a public server using Apache's Reverse Proxy. I'd like it so the following happens: http://public-proxy-server/user1/ actually shows the content from http://10.0.2.20/user1/www/ without indicating it in the URL. (/private/ would not be accessible via the public proxy server). The key here, is for it to be dynamic, so all requests to http://public-proxy-server/*/should show content from http://10.0.2.20/*/www/. Again, the proxy currently works fine; below is the config: (On the public server) <VirtualHost *:80> ServerName www.domain.com ProxyRequests Off ProxyPreserveHost On ProxyVia full ProxyPass / http://10.0.2.20/ ProxyPassReverse / http://10.0.2.20/ </VirtualHost> (On the backend server) <VirtualHost *:80> ... #this directory contains folders 'user1' and 'user2' DocumentRoot /var/www/ ... </VirtualHost>

  Read the article

• Can't access Port 80 from external

  - by dewacorp.alliances

  Hi there I have configuration like this: NETGEAR MODEM LINKSYS ROUTER SERVERS In the modem, I've setup as bridging and all the traffic is controlling by this ROUTER. Prior to this setup, I can access website from external (port 80) plus exchange servers (mail) and https. But now with this configuration, I can only send/receive using Exhcange servers and access OWA (Outlook web access using port 443) .... and no internal websites from outside. This is my config for LINKSYS ROUTER Application | Start | End | Protocol | IP Address Ms Exchange | 25 | 25 | Both (TCP/UDP) | 192.168.100.8 Internets | 80 | 80 | Both (TCP/UDP) | 192.168.100.11 SSL | 443 | 443 | Both (TCP/UDP) | 192.168.100.8 Exchange | 110 | 110 | Both (TCP/UDP) | 192.168.100.8 192.168.100.11 is a UBUNTU web server that running the apache which controlling the virtual name (extranet, cms, test) to redirect to the different servers. As you can see, the home internet is only allowing public IP address. Now I test this schenarion in internal network work nicely. For instance. If I type in extranet.XXX.local it goes to the right applicatios or if I try CMS.XXX.local again it goes to the right one. I also asked to ISP just in case if they are blocking the inbound port 80 for unknown reason. They said no. So I didn't understand why this happens. I suspect the configuration that I have between MODEM ROUTER but I counldn't work what it is. I don't have a documentation of previous settings and I don't know if there is a port that I need to open as well. I am appreciated your comment

  Read the article

• IIS crashes with unhandled exception in ASP.NET

  - by SnowCrash

  We had an issue recently with an unhandled exception in an ASP.NET C# application bringing down IIS and all application pools that it was hosting. IIS Manager was unable to restart or stop/start the service and I was unable start IIS again after killing w3wp.exe in the task manager. A system reboot restored IIS to a running state; as a primarily Linux admin, I generally consider an unplanned system reboot to resolve a software error to be an act of high heresy. Is there a way to "harden" IIS so that a faulting application does not affect anything but the request that exposes the fault? Some details on the server and application fault. IIS: 7.5 .NET: 4.0 Windows Server 2008 R2 Faulted on call to System.Net.Dns.Resolve() with a url pointing to a non-existant domain as the argument. (I'm aware that this method is deprecated but the point that a page code issue shouldn't bring down the server still stands) The exception generated was SocketException. The faulting module according to event viewer was KERNELBASE.dll The issue was resolved by wrapping the call in a try-catch, logging the exception and displaying some generic content on the page. I'm hoping that I missed something in the IIS config that would switch it to "production" mode or something.

  Read the article

• Problems configuring logstash for email output

  - by user2099762

  I'm trying to configure logstash to send email alerts and log output in elasticsearch / kibana. I have the logs successfully syncing via rsyslog, but I get the following error when I run /opt/logstash-1.4.1/bin/logstash agent -f /opt/logstash-1.4.1/logstash.conf --configtest Error: Expected one of #, {, ,, ] at line 23, column 12 (byte 387) after filter { if [program] == "nginx-access" { grok { match = [ "message" , "%{IPORHOST:remote_addr} - %{USERNAME:remote_user} [%{HTTPDATE:time_local}] %{QS:request} %{INT:status} %{INT:body_bytes_sent} %{QS:http_referer} %{QS:http_user_agent}” ] } } } output { stdout { } elasticsearch { embedded = false host = " Here is my logstash config file input { syslog { type => syslog port => 5544 } } filter { if [program] == "nginx-access" { grok { match => [ "message" , "%{IPORHOST:remote_addr} - %{USERNAME:remote_user} \[% {HTTPDATE:time_local}\] %{QS:request} %{INT:status} %{INT:body_bytes_sent} %{QS:http_referer} %{QS:http_user_agent}” ] } } } output { stdout { } elasticsearch { embedded => false host => "localhost" cluster => "cluster01" } email { from => "[email protected]" match => [ "Error 504 Gateway Timeout", "status,504", "Error 404 Not Found", "status,404" ] subject => "%{matchName}" to => "[email protected]" via => "smtp" body => "Here is the event line that occured: %{@message}" htmlbody => "<h2>%{matchName}</h2><br/><br/><h3>Full Event</h3><br/><br/><div align='center'>%{@message}</div>" } } I've checked line 23 which is referenced in the error and it looks fine....I've tried taking out the filter, and everything works...without changing that line. Please help

  Read the article

• OpenSWAN KLIPS not working

  - by bonzi

  I am trying to setup IPSec between 2 VM launched by OpenNebula. I'm using OpenSWAN for that. This is the ipsec.conf file config setup oe=off interfaces=%defaultroute protostack=klips conn host-to-host left=10.141.0.135 # Local IP address connaddrfamily=ipv4 leftrsasigkey=key right=10.141.0.132 # Remote IP address rightrsasigkey=key ike=aes128 # IKE algorithms (AES cipher) esp=aes128 # ESP algorithns (AES cipher) auto=add pfs=yes forceencaps=yes type=tunnel I'm able to establish the connection with netkey but klips doesnt work. ipsec barf shows #71: ERROR: asynchronous network error report on eth0 (sport=500) for message to 10.141.0.132 port 500, complainant 10.141.0.135: No route to host [errno 113, origin ICMP type 3 code 1 (not authenticated)] Tcpdump shows 22:50:20.592685 IP 10.141.0.132.isakmp > 10.141.0.135.isakmp: isakmp: phase 1 I ident 22:50:25.602182 ARP, Request who-has 10.141.0.135 tell 10.141.0.132, length 46 22:50:26.602082 ARP, Request who-has 10.141.0.135 tell 10.141.0.132, length 46 22:50:27.601985 ARP, Request who-has 10.141.0.135 tell 10.141.0.132, length 46 ipsec eroute shows 0 10.141.0.135/32 -> 10.141.0.132/32 => %trap What could be the problem?

  Read the article

• Google account gives ERR_SSL_BAD_RECORD_MAC_ALERT errors

  - by Kjensen

  A couple of days ago, I started being unable to connect to accounts.google.com, which handles logins to all kinds of google services. I get this error in Chrome: Error 126 (net::ERR_SSL_BAD_RECORD_MAC_ALERT): Unknown error. In IE I get this: I assume it is the same error, just wrapped up. I run Win8 RTM. On the SAME machine, using the same network card, in a VMWare workstation image running Win7, I am able to connect perfectly. On another of my machines on my network, I am also still able to connect with no problem. My girlfriend uses the same network and has also complained a couple of times about this error (google calendar) - but this is anecdotal, since her technical troubleshooting abilities stop at "xxxx is broken". Her machine runs Win7. ;) I have rebooted, cleared cookies, do not run any antivirus/firewall, have not changed network config. The first 3-4 days after installing Win8, I did not have any problems. I have also searched, and found a hint about enabling SSL2.0 in connection settings, which did not help. Anybody know something about this error and what I can do to fix it?

  Read the article

• Apache going straight to 100% mem usage on localhost

  - by Dennis Pedrie

  Hi, I'm running XAMPP on a OS X testing server... I'm the only person sending requests to the server. I've never messed with Apache config before, so I'm kinda without a paddle here. When I start Apache, I get ~10 httpd processes started, and 95% idle CPU. When I request a WordPress page, the CPU usage goes to 50%, and the page loads in about five seconds. It seems like once the page has finished loading, the CPU usage jumps to 100%, almost all of that httpd. A ton of processes get started, and they don't go away, and their CPU usage stays the same. I've changed the MaxRequestPerChild setting and so forth, but nothing seems to solve the problem. Even now, having not send any requests for about 15 minutes, the CPU usage is at 100%. Here's the applicable settings: Timeout 10 KeepAlive On MaxKeepAliveRequests 0 KeepAliveTimeout 3 <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 0 MaxSpareServers 2 MaxClients 20 MaxRequestsPerChild 50 </IfModule> I had always thought that once the request was made, Apache killed the process. Is there anything I can do to bring down the CPU usage, or is this just something I'll have to deal with? Thanks for helping out an Apache idiot.

  Read the article

• Setting the default permissions for files uploaded via FTP to a directory

  - by Kerri

  Disclaimer: I'm just a web designer/coder, and server admin stuff is my weakest point of them all. So be easy on me (and very specific). I'm using a simple CMS (Unify) on a site, where part of the functionality is that the client can upload files to a specified directory (using FTP). The permissions for the upload directory are set to 755. But when files are uploaded through the interface, they are uploaded with permissions set to 640 (instead of 644), so site visitors cannot acces the files. When I emailed the CMS's support about this, they told me that it was a server setting, and I need to make sure that files uploaded through FTP are set to 644. Makes perfect sense, but I have no idea how to do this. Any help would be greatly appreciated. This site is a shared site hosted by Network Solutions (Unix), so my access options are limited. I can edit .htaccess files, and php.ini, but that's about all I have access to. It appears I can't even log on via shell. ETA: 11/11/2010 Thanks all. I was able to work around this problem by setting up the CMS's settings in a different way. I'd be interested in following up on Nick O'Niel's suggestions, because I think he's on the right track, but unfortunately I can't access the necessary files on this particular server. So, anyway, I'm leaving this open, since the original questions isn't exactly resolved. Unfortunately, I probably can't put a correct answer to the test, since the shared server in question has nearly all of its config files tightly locked down.

  Read the article

• IIS 6 Windows Authentication in ASP.Net app fails

  - by Kjensen

  I am trying to install an ASP.Net app on an IIS6 webserver. The site requires the user to authenticate with windows, and this works on several other apps on the same server. In IIS I have enabled anonymous access and windows authentication. In web.config, authentication is set to: <authentication mode="Windows"/> and authorization...: <authorization> <allow roles="Users"/> <deny users="*"/> </authorization> Ie. allow all users in role "Users" and deny everybody else. This is the approach that is working with several other apps on the same server. If I run the site, I am prompted for username and password. If I remove the line: <deny users="*"/> I can access the site and everything works - but the user credentials are not passed to the site (Page.User.Identity.Name returns a blank string in ASP.Net). The site has identical (inherited) file permissions as other working sites on the server. The only difference in authentication/authorization between this site and the other working sites is, that this runs Asp.Net 4 (but there are other working asp.net 4 sites on the server as well). What am I missing here? Where should I look?

  Read the article

• Service nginx reload: unexpected error

  - by Anna

  I'm trying to install wordpress on my nginx server by following this tutorial: http://premium.wpmudev.org/blog/how-to-setup-your-own-nginx-powered-wordpress-server/ However, the last command at step 7 gave me a strange error: service nginx reload A copy-paste from my terminal: root@server:~# service nginx reload Reloading nginx configuration: nginx: [emerg] unexpected "o" in /etc/nginx/sites-enabled/wordpress:7 nginx: configuration file /etc/nginx/nginx.conf test failed When I nano into sites-enabled/wordpress, on the 7th line I can't find anything strange: <!DOCTYPE html> <html class=" "> <head prefix="og: http://ogp.me/ns# fb: http://ogp.me/ns/fb# object: http://ogp.me/ns/object# article: http://ogp.me/ns/article# profile: http://ogp.me/ns/profile#"> <meta charset='utf-8'> <meta http-equiv="X-UA-Compatible" content="IE=edge"> Also, I don't see any obvious errors in my nginx.conf file, but maybe I'm not checking something? The first couple of lines of the nginx config file: user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } Any help is appreciated, thanks a lot in advance!

  Read the article

• Missing whole disk device in OpenSolaris

  - by Jeff Mc

  I have begun experimenting with Solaris and ZFS as a NAS. All was going very smoothly until I had a drive failure. When I replaced the drive, I no longer have a device file mapped to the whole disk. /dev/dsk/c7t3d0 does not exist but c7t2d0 and c7t4d0 both do. Also the sd@3,0:wd file under the /devices/ tree is non-existent. Do I have to prepare/partition the disk somehow to cause the whole disk device to exist? Here are a few outputs that might be useful. jeffmc@ats-ds2:/dev/dsk$ zpool status pool: datapool state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Attach the missing device and online it using 'zpool online'. see: http://www.sun.com/msg/ZFS-8000-2Q scrub: none requested config: NAME STATE READ WRITE CKSUM datapool DEGRADED 0 0 0 mirror-0 DEGRADED 0 0 0 c7t2d0 ONLINE 0 0 0 c7t3d0 UNAVAIL 0 0 0 cannot open mirror-1 ONLINE 0 0 0 c7t4d0 ONLINE 0 0 0 c7t5d0 ONLINE 0 0 0 jeffmc@ats-ds2:/dev/dsk$ zpool replace datapool c7t3d0 cannot open 'c7t3d0': no such device in /dev/dsk must be a full path or shorthand device name jeffmc@ats-ds2:/dev/dsk$ sudo format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c7t0d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@0,0 1. c7t1d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@1,0 2. c7t2d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@2,0 3. c7t3d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@3,0 4. c7t4d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@4,0 5. c7t5d0 /pci@0,0/pci8086,3599@6/pci8086,330@0/pci1014,2cc@7,1/sd@5,0

  Read the article

< Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >