Search Results

Search found 186926 results on 7478 pages for 'not working'.

Page 34/7478 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • My ethernet connection is not working but it is detected by my computer

    - by smithy545
    I'm setting up an old computer with ubuntu server 12.04. I wiped the drive and went through the installation fine but afterwards the ethernet would not work. It's physically connected to the router and the card is recognized by lspci(SiS 900) but it won't connect at all. I've plugged in and installed the drivers for a wifi adapter and it's worked with the same router. Just so you know I've turned it on and off plenty of times. Any help would be appreciated.

    Read the article

  • Get Compiz working on x1300 ati

    - by wdkrnls
    Hi, I have Ubuntu 10.10 installed on a thinkpad T60 with an ati mobile x1300. Ubuntu isn't loading any proprietary drivers and compiz doesn't work. A google search turned up nothing. Sure, some people reported "bad performance", but I'm not getting any "performance" with compiz and these post were all for previous editions. I'm new to messing with ati drivers. Is there a way to make sure xorg-video-ati is loaded? Do I have to add any voodoo lines somewhere in /etc/X11/? Did anyone else have this problem? Thanks for your help!

    Read the article

  • Wobbly windows not working in compiz for 12.04

    - by f22christian
    I'm very new at Ubuntu and am still trying to figure everything out. I recently downloaded Compiz settings manager and enabled wobbly windows. Nothing. So I uninstalled it and re-installed it and still, nothing. I've ran all the updates and updated the graphics drivers and I still have nothing. I have a Sony Vaio with a Intel® Core™2 CPU T5500 @ 1.66GHz × 2 . Its a 2009 computer, so I think it should be able to work just fine. Please help! I'm not a "computer wiz", so you'll need to put it in simpler terms for me. And yes, I am I do have Unity 3D. Thanks!

    Read the article

  • Wine not working in 12.04?

    - by Thunderbug
    I updated to Ubuntu 12.04 by doing a clean install from a CD. I installed Wine, Q4wine, WineTricks, PlayOnLinux all from the Software Center. After installing Kindle For PC(I ran it in 11.10 as well) Wine doesn't open it. Then I tried to install a game (Eastside Hockey Manager 2007) that I have had Installed on all my previous versions of Ubuntu, again Wine returned an error saying that the installer GUI would not load. So far I'm lost as to why this is happening. Does anyone have an idea?

    Read the article

  • Getting wifi working on 14.04

    - by user286114
    I have installed Ubuntu 14.04 on my laptop. When I plug in the ethernet cable the internet works fine, but I can't see any wireless network in the networking manager. The wifi switch is definitely on on my laptop! It's a Dell XPS M1330. I'm not sure what the network card is - how can I find out? nm-tool gives me this: NetworkManager Tool State: connected (global) - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: tg3 State: connected Default: yes HW Address: 00:23:AE:28:FE:A2 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.26 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.254 DNS: 192.168.1.254

    Read the article

  • Apache stops responding to http requests -- https continues to work

    - by Apropos
    Okay. Very strange problem that I'm having here. I just recently updated to Apache 2.4.2 from 2.2.17, mostly to try to get name-based SSL VirtualHosts working (although they should have been working on 2.2.17). Server is Win2008 R2 (so x64 by definition) running with PHP 5.4.3 and MySQL 5.1.40 (outdated, I know). When I launch the server, it initially works fine. Responds to all requests, VirtualHosts all in order. However, after an uncertain amount of time (appears to only take a few minutes for the most part, but sometimes takes hours), it stops responding to regular HTTP requests (on any VirtualHost). HTTPS continues to work. No errors in the log, and nothing in the access logs when I attempt to connect. I'm having a hard time finding the source of this error given its intermittent nature. When removing all SSL-based VirtualHosts, it seemingly increased stability (still responding to HTTP requests twelve hours later). This could be mere coincidence, though. Entirety of SSL VirtualHost is as follows, should there happen to be a problem with it. <VirtualHost *:443> DocumentRoot "C:\Server\www\virtualhosts\mysite.net" ErrorLog logs/ssl.mysite.net-error_log CustomLog logs/ssl.mysite.net-access_log common env=!dontlog SSLEngine on SSLProtocol all -SSLv2 SSLCipherSuite ALL:!ADH:!EXPORT:!SSLv2:RC4+RSA:+HIGH:+MEDIUM SSLCertificateFile C:/Server/bin/apache/apache2.4.2/conf/ssl/server.crt SSLCertificateKeyFile C:/Server/bin/apache/apache2.4.2/conf/ssl/server.key SSLCertificateChainFile C:/Server/bin/apache/Apache2.4.2/conf/ssl/sub.class1.server.ca.pem SSLCACertificateFile C:/Server/bin/apache/Apache2.4.2/conf/ssl/ca.pem </VirtualHost> Any ideas what I'm missing?

    Read the article

  • Django-admin.py not working (-bash:django-admin.py: command not found)

    - by Diego
    I'm having trouble getting django-admin.py to work... it's in this first location: /Users/mycomp/bin/ but I think I need it in another location for the terminal to recognize it, no? Noob, Please help. Thanks!! my-computer:~/Django-1.1.1 mycomp$ sudo ln -s /Users/mycomp/bin/django-admin.py /Users/mycomp/django-1.1.1/django-admin.py Password: ln: /Users/mycomp/django-1.1.1/django-admin.py: File exists my-computer:~/Django-1.1.1 mycomp$ django-admin.py --version -bash: django-admin.py: command not found

    Read the article

  • bluetooth not working on Ubuntu 13.10

    - by iacopo
    I upgrated ubuntu from 13.4 to 13.10 and my bluetooth stopped working. When I open bluetooth I'm able to put it ON but the visibility doesn't show anything and didn't detect any device. when I: dmesg | grep Blue [ 2.046249] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.046252] usb 3-1: Manufacturer: Bluetooth v2.0 [ 15.255710] Bluetooth: Core ver 2.16 [ 15.255748] Bluetooth: HCI device and connection manager initialized [ 15.255759] Bluetooth: HCI socket layer initialized [ 15.255765] Bluetooth: L2CAP socket layer initialized [ 15.255776] Bluetooth: SCO socket layer initialized [ 20.110379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.110386] Bluetooth: BNEP filters: protocol multicast [ 20.110400] Bluetooth: BNEP socket layer initialized [ 20.120635] Bluetooth: RFCOMM TTY layer initialized [ 20.120656] Bluetooth: RFCOMM socket layer initialized [ 20.120660] Bluetooth: RFCOMM ver 1.11 when I digit: lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0bc2:2300 Seagate RSS LLC Expansion Portable Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 0e6a:6001 Megawin Technology Co., Ltd GEMBIRD Flexible keyboard KB-109F-B-DE Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 13ee:0001 MosArt Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub when I: hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1B:10:00:2A:EC ACL MTU: 1017:8 SCO MTU: 64:0 DOWN RX bytes:457 acl:0 sco:0 events:16 errors:0 TX bytes:68 acl:0 sco:0 commands:16 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT when I digit: rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no when I digit: sudo gedit /etc/bluetooth/main.conf [General] # List of plugins that should not be loaded on bluetoothd startup #DisablePlugins = network,input # Default adaper name # %h - substituted for hostname # %d - substituted for adapter id Name = %h-%d # Default device class. Only the major and minor device class bits are # considered. Class = 0x000100 # How long to stay in discoverable mode before going back to non-discoverable # The value is in seconds. Default is 180, i.e. 3 minutes. # 0 = disable timer, i.e. stay discoverable forever DiscoverableTimeout = 0 # How long to stay in pairable mode before going back to non-discoverable # The value is in seconds. Default is 0. # 0 = disable timer, i.e. stay pairable forever PairableTimeout = 0 # Use some other page timeout than the controller default one # which is 16384 (10 seconds). PageTimeout = 8192 # Automatic connection for bonded devices driven by platform/user events. # If a platform plugin uses this mechanism, automatic connections will be # enabled during the interval defined below. Initially, this feature # intends to be used to establish connections to ATT channels. AutoConnectTimeout = 60 # What value should be assumed for the adapter Powered property when # SetProperty(Powered, ...) hasn't been called yet. Defaults to true InitiallyPowered = true # Remember the previously stored Powered state when initializing adapters RememberPowered = false # Use vendor id source (assigner), vendor, product and version information for # DID profile support. The values are separated by ":" and assigner, VID, PID # and version. # Possible vendor id source values: bluetooth, usb (defaults to usb) #DeviceID = bluetooth:1234:5678:abcd # Do reverse service discovery for previously unknown devices that connect to # us. This option is really only needed for qualification since the BITE tester # doesn't like us doing reverse SDP for some test cases (though there could in # theory be other useful purposes for this too). Defaults to true. ReverseServiceDiscovery = true # Enable name resolving after inquiry. Set it to 'false' if you don't need # remote devices name and want shorter discovery cycle. Defaults to 'true'. NameResolving = true # Enable runtime persistency of debug link keys. Default is false which # makes debug link keys valid only for the duration of the connection # that they were created for. DebugKeys = false # Enable the GATT functionality. Default is false EnableGatt = false when I digit: dmesg | grep Bluetooth [ 2.013041] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.013049] usb 3-1: Manufacturer: Bluetooth v2.0 [ 13.798293] Bluetooth: Core ver 2.16 [ 13.798338] Bluetooth: HCI device and connection manager initialized [ 13.798352] Bluetooth: HCI socket layer initialized [ 13.798357] Bluetooth: L2CAP socket layer initialized [ 13.798368] Bluetooth: SCO socket layer initialized [ 20.184162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.184173] Bluetooth: BNEP filters: protocol multicast [ 20.184197] Bluetooth: BNEP socket layer initialized [ 20.238947] Bluetooth: RFCOMM TTY layer initialized [ 20.238983] Bluetooth: RFCOMM socket layer initialized [ 20.239018] Bluetooth: RFCOMM ver 1.11 When I digit: uname -a Linux casa-desktop 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux When I digit: lsmod Module Size Used by parport_pc 32701 0 rfcomm 69070 4 bnep 19564 2 ppdev 17671 0 ip6t_REJECT 12910 1 xt_hl 12521 6 ip6t_rt 13507 3 nf_conntrack_ipv6 18938 9 nf_defrag_ipv6 34616 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17718 8 xt_limit 12711 11 xt_tcpudp 12884 32 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 9 nf_defrag_ipv4 12729 1 nf_conntrack_ipv4 xt_conntrack 12760 18 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12741 0 nf_nat 26653 1 nf_nat_ftp kvm_amd 59958 0 nf_conntrack_ftp 18608 1 nf_nat_ftp kvm 431315 1 kvm_amd nf_conntrack 91736 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ip_tables 27239 1 iptable_filter snd_hda_codec_realtek 55704 1 ghash_clmulni_intel 13259 0 aesni_intel 55624 0 aes_x86_64 17131 1 aesni_intel snd_hda_codec_hdmi 41117 1 x_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT lrw 13257 1 aesni_intel snd_hda_intel 48171 5 gf128mul 14951 1 lrw glue_helper 13990 1 aesni_intel ablk_helper 13597 1 aesni_intel joydev 17377 0 cryptd 20329 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hda_codec 188738 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel arc4 12608 2 snd_hwdep 13602 1 snd_hda_codec rt2800pci 18690 0 snd_pcm 102033 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel radeon 1402449 3 rt2800lib 79963 1 rt2800pci btusb 28267 0 rt2x00pci 13287 1 rt2800pci rt2x00mmio 13603 1 rt2800pci snd_page_alloc 18710 2 snd_pcm,snd_hda_intel rt2x00lib 55238 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio snd_seq_midi 13324 0 mac80211 596969 3 rt2x00lib,rt2x00pci,rt2800lib snd_seq_midi_event 14899 1 snd_seq_midi ttm 83995 1 radeon snd_rawmidi 30095 1 snd_seq_midi cfg80211 479757 2 mac80211,rt2x00lib drm_kms_helper 52651 1 radeon snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi bluetooth 371880 12 bnep,btusb,rfcomm microcode 23518 0 eeprom_93cx6 13344 1 rt2800pci snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi crc_ccitt 12707 1 rt2800lib snd_timer 29433 2 snd_pcm,snd_seq snd 69141 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi psmouse 97626 0 drm 296739 5 ttm,drm_kms_helper,radeon k10temp 13126 0 soundcore 12680 1 snd serio_raw 13413 0 i2c_algo_bit 13413 1 radeon i2c_piix4 22106 0 video 19318 0 mac_hid 13205 0 lp 17759 0 parport 42299 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 53014 0 hid 105818 2 hid_generic,usbhid pata_acpi 13038 0 usb_storage 62062 1 r8169 67341 0 sdhci_pci 18985 0 sdhci 42630 1 sdhci_pci mii 13934 1 r8169 pata_atiixp 13242 0 ohci_pci 13561 0 ahci 25819 2 libahci 31898 1 ahci Someone can help me?

    Read the article

  • Jqgrid search option not working and edit popups not closed after submit

    - by Sajith
    i have facing two problem in Jqgrid. Search option not working and there is not closed editpopups after submit. my code below <table id="jQGridpending" style="width:auto"> </table> <div id="jQGridpendingPager"> </div> <table id="searchpending"></table> <div id="filterpending"></div> jQuery("#jQGridpending").jqGrid({ url: '@Url.Action("DiscountRequest", "Admin")', datatype: "json", mtype: "POST", colNames: [ "Id", "ClientName", "BpName", "Pdt", "DiscountReq", "DiscountAllowed", "Status", ], colModel: [ { name: "Id", width: 100, key: true, formatter: "integer", sorttype: "integer", hidden: true }, { name: "ClientName", width: 150, sortable: true,search:true,stype:'text', editrules: { required: false } }, { name: "BpName", width: 200, sortable: true, editable: false, editrules: { required: false } }, { name: "Pdt", width: 150, sortable: true, editable: false, editrules: { required: false } }, { name: "DiscountReq", width: 150, sortable: false, editable: false, editrules: { required: false } }, { name: "DiscountAllowed", width: 200, sortable: true, editable: true, editrules: { required: true } }, { name: 'Status', index: 'Status', width: 200, sortable: false, editable: true, formatter: 'select', edittype: 'select', editoptions: { value: "pending:pending;approved:approved;rejected:rejected" } }, @* { name: "Status", width: 200, sortable: false, editable: true, editrules: { required: true, minValue: 1, }, edittype: "select", editoptions: { async: false, dataUrl: "@Url.Action("GetStatus", "Admin")", buildSelect: function (response) { var s = "<select>"; s += '<option value="0">--Select--</option><option value="pending">pending</option>'; return s + "</select>"; } } },*@ //{ name: "Status", width: 150, sortable: true, editable: true, editrules: { required: true } }, //{ name: "Created", width: 120, formatter: "date", formatoptions: { srcformat: "ISO8601Long", newformat: "n/j/Y g:i:s A" }, align: "center", sorttype: "date" }, ], loadtext: "Processing pending request data please wait...", rowNum: 10, gridview: true, autoencode: true, loadonce: true, height: "auto", rownumbers: true, prmNames: { id: "Id" }, rowList: [10, 20, 30], pager: '#jQGridpendingPager', sortname: 'id', sortorder: "asc", viewrecords: true, jqModal: true, caption: "Pending List", reloadAfterSubmit: true, editurl: '@Url.Action("UpdateDiscount", "Admin")', }); jQuery("#jQGridpending").jqGrid('navGrid', '#jQGridpendingPager', { search: true,recreateFilter: true, add: false, searchtext: "Search", edittext: "Edit", deltext: "Delete", }, {//EDIT url: '@Url.Action("UpdateDiscount", "Admin")', width: "auto", jqModal: true, closeOnEscape: true, closeAfterEdit: true, reloadAfterSubmit: true, afterSubmit: function () { // Reload grid records after edit a entry in the db. $(this).jqGrid('setGridParam', { datatype: 'json' }); return [true, '', false]; }, }, {//DELETE url: '@Url.Action("DelDiscount", "Admin")', closeOnEscape: true }, {//SEARCH closeOnEscape: true, searchOnEnter: true, multipleSearch: true, //overlay: 0, width: "auto", height: "auto", });

    Read the article

  • jBullet Collision/Physics not working correctly

    - by Kenneth Bray
    Below is the code for one of my objects in the game I am creating (yes although this is a cube, I am not making anything remotely like MineCraft), and my issue is I while the cube will display and is does follow the physics if the cube falls, it does not interact with any other objects in the game. If I was to have multiple cubes in screen at once they all just sit there, or shoot off in all directions never stopping. Anyway, I am new to jBullet, and any help would be appreciated. package Object; import static org.lwjgl.opengl.GL11.GL_QUADS; import static org.lwjgl.opengl.GL11.glBegin; import static org.lwjgl.opengl.GL11.glColor3f; import static org.lwjgl.opengl.GL11.glEnd; import static org.lwjgl.opengl.GL11.glPopMatrix; import static org.lwjgl.opengl.GL11.glPushMatrix; import static org.lwjgl.opengl.GL11.glVertex3f; import javax.vecmath.Matrix4f; import javax.vecmath.Quat4f; import javax.vecmath.Vector3f; import com.bulletphysics.collision.shapes.BoxShape; import com.bulletphysics.collision.shapes.CollisionShape; import com.bulletphysics.dynamics.RigidBody; import com.bulletphysics.dynamics.RigidBodyConstructionInfo; import com.bulletphysics.linearmath.DefaultMotionState; import com.bulletphysics.linearmath.Transform; public class Cube { // Cube size/shape variables private float size; boolean cubeCollidable; boolean cubeDestroyable; // Position variables - currently this defines the center of the cube private float posX; private float posY; private float posZ; // Rotation variables - should be between 0 and 359, might consider letting rotation go higher though I can't think of a purpose currently private float rotX; private float rotY; private float rotZ; //collision shape is a box shape CollisionShape fallShape; // setup the motion state for the ball DefaultMotionState fallMotionState; Vector3f fallInertia = new Vector3f(0, 1, 0); RigidBodyConstructionInfo fallRigidBodyCI; public RigidBody fallRigidBody; int mass = 1; // Constructor public Cube(float pX, float pY, float pZ, float pSize) { posX = pX; posY = pY; posZ = pZ; size = pSize; rotX = 0; rotY = 0; rotZ = 0; // define the physics based on the values passed in fallShape = new BoxShape(new Vector3f(size, size, size)); fallMotionState = new DefaultMotionState(new Transform(new Matrix4f(new Quat4f(0, 0, 0, 1), new Vector3f(0, 50, 0), 1f))); fallRigidBodyCI = new RigidBodyConstructionInfo(mass, fallMotionState, fallShape, fallInertia); fallRigidBody = new RigidBody(fallRigidBodyCI); } public void Update() { Transform trans = new Transform(); fallRigidBody.getMotionState().getWorldTransform(trans); posY = trans.origin.x; posX = trans.origin.y; posZ = trans.origin.z; } public void Draw() { fallShape.calculateLocalInertia(mass, fallInertia); // center point posX, posY, posZ float radius = size / 2; //top glPushMatrix(); glBegin(GL_QUADS); { glColor3f(1.0f,0.0f,0.0f); // red glVertex3f(posX + radius, posY + radius, posZ - radius); glVertex3f(posX - radius, posY + radius, posZ - radius); glVertex3f(posX - radius, posY + radius, posZ + radius); glVertex3f(posX + radius, posY + radius, posZ + radius); } glEnd(); glPopMatrix(); //bottom glPushMatrix(); glBegin(GL_QUADS); { glColor3f(1.0f,1.0f,0.0f); // ?? color glVertex3f(posX + radius, posY - radius, posZ + radius); glVertex3f(posX - radius, posY - radius, posZ + radius); glVertex3f(posX - radius, posY - radius, posZ - radius); glVertex3f(posX + radius, posY - radius, posZ - radius); } glEnd(); glPopMatrix(); //right side glPushMatrix(); glBegin(GL_QUADS); { glColor3f(1.0f,0.0f,1.0f); // ?? color glVertex3f(posX + radius, posY + radius, posZ + radius); glVertex3f(posX + radius, posY - radius, posZ + radius); glVertex3f(posX + radius, posY - radius, posZ - radius); glVertex3f(posX + radius, posY + radius, posZ - radius); } glEnd(); glPopMatrix(); //left side glPushMatrix(); glBegin(GL_QUADS); { glColor3f(0.0f,1.0f,1.0f); // ?? color glVertex3f(posX - radius, posY + radius, posZ - radius); glVertex3f(posX - radius, posY - radius, posZ - radius); glVertex3f(posX - radius, posY - radius, posZ + radius); glVertex3f(posX - radius, posY + radius, posZ + radius); } glEnd(); glPopMatrix(); //front side glPushMatrix(); glBegin(GL_QUADS); { glColor3f(0.0f,0.0f,1.0f); //blue glVertex3f(posX + radius, posY + radius, posZ + radius); glVertex3f(posX - radius, posY + radius, posZ + radius); glVertex3f(posX - radius, posY - radius, posZ + radius); glVertex3f(posX + radius, posY - radius, posZ + radius); } glEnd(); glPopMatrix(); //back side glPushMatrix(); glBegin(GL_QUADS); { glColor3f(0.0f,1.0f,0.0f); // green glVertex3f(posX + radius, posY - radius, posZ - radius); glVertex3f(posX - radius, posY - radius, posZ - radius); glVertex3f(posX - radius, posY + radius, posZ - radius); glVertex3f(posX + radius, posY + radius, posZ - radius); } glEnd(); glPopMatrix(); } }

    Read the article

  • UIViewController not oreintating. Methods not called

    - by capple
    Greetings, This question does seem to be an ongoing saga in the world of iphone SDK... so heres my contribution... Had two separate projects from the same template... one semi-works, the other not at all... Please let me explain my steps... used this basic GL ES template //iphonedevelopment.blogspot.com/2008/12/opengl-project-template-for-xcode.html had to sort out some of the 'Release' configuration but otherwises has eveything I need to add orientation to a GL ES project. One my first project, did my stuff, then added these methods.... -(BOOL)shouldAutoRotateToInterfaceOrientation ..... -(void)willRotateToInterfaceOrientation .... -(void)didRotateFromInterfaceOrientation .... -(void)willAnimateRotationToInterfaceOrientation .... And understand what they do (or are trying to do in my case), the (BOOL)should... gets called once when the view controller is created, and returns 'YES'. But after that none of the other methods are called! So I started from scratch with a blank template (GL ES one from above)...and added minimum to support auto rotation. But this time none of the methods get called! So I investigated .... //developer.apple.com/iphone/library/qa/qa2010/qa1688.html as it said, I added the GLViewController.view first, then added the GLview as subviews of the application delegate. Nothing! Then found this //www.iphonedevsdk.com/forum/iphone-sdk-development/44993-how-determine-ipad-launch-orientation.html which states to enable orientation notifications [[UIDevice currentDevice] beginGeneratingDeviceOrientationNotifications]; and then subsequently disable them in the view controller... makes sense...did it, nothing... I think the notifications might be on by default though, since I didn't need to enable them in the first project, yet it still try to verify a orientation (i.e (BOOL)shouldAutoRotate... )... If any one could help me out it would be greatly appreciated as this issue is driving me insane. Thanks in advance. The code can be found here ... http://rapidshare.com/files/392053688/autoRotation.zip N.B These projects avoid nib/xib resources, would like to keep it that way if possible. P.S iPad device not out where I am so I cannot test on a device yet. Would be nice for it to work on the simulator.

    Read the article

  • Disk Drive not working

    - by user287681
    The CD/DVD drive on my sisters' (I'm helping her shift from Win. XP (now officially deprecated by Microsoft) to Ubuntu) system. Now, it may end up being a failed attempt, all together (Almost the whole last year (when she's been on XP) the disk drive hasn't (not even powering on) been working.), I just want to make sure I've explored every remote possibility. Because I figure, "Huh, now that I've got Ubuntu running, instead of XP, that (just) might make a difference.". I have tried using the sudo lshw command in the terminal, to (seemingly) no avil, but, who knows, you might be able to make something out of it. Here's the output: kyra@kyra-Satellite-P105:~$ sudo lshw [sudo] password for kyra: kyra-satellite-p105 description: Notebook product: Satellite P105 () vendor: TOSHIBA version: PSPA0U-0TN01M serial: 96084354W width: 64 bits capabilities: smbios-2.4 dmi-2.4 vsyscall32 configuration: administrator_password=disabled boot=oem-specific chassis=notebook frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=00900559-F88E-D811-82E0-00163680E992 *-core description: Motherboard product: Satellite P105 vendor: TOSHIBA physical id: 0 version: Not Applicable serial: 1234567890 *-firmware description: BIOS vendor: TOSHIBA physical id: 0 version: V4.70 date: 01/19/20092 size: 92KiB capabilities: isa pci pcmcia pnp upgrade shadowing escd cdboot acpi usb biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM)2 CPU T5 slot: U2E1 size: 1667MHz capacity: 1667MHz width: 64 bits clock: 166MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1 Cache size: 16KiB capacity: 16KiB capabilities: asynchronous internal write-back *-cache:1 description: L2 cache physical id: 6 slot: L2 Cache size: 2MiB capabilities: burst external write-back *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB capacity: 3GiB *-bank:0 description: SODIMM DDR2 Synchronous physical id: 0 slot: M1 size: 1GiB width: 64 bits *-bank:1 description: SODIMM DDR2 Synchronous physical id: 1 slot: M2 size: 1GiB width: 64 bits *-pci description: Host bridge product: Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display:0 description: VGA compatible controller product: Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0200000-d027ffff ioport:1800(size=8) memory:c0000000-cfffffff memory:d0300000-d033ffff *-display:1 UNCLAIMED description: Display controller product: Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:d0280000-d02fffff *-multimedia description: Audio device product: NM10/ICH7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d0340000-d0343fff *-pci:0 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:3000(size=4096) memory:84000000-841fffff ioport:84200000(size=2097152) *-pci:1 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:4000(size=4096) memory:84400000-846fffff ioport:84700000(size=2097152) *-network description: Wireless interface product: PRO/Wireless 3945ABG [Golan] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 02 serial: 00:13:02:d6:d2:35 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl3945 driverversion=3.13.0-29-generic firmware=15.32.2.9 ip=10.110.20.157 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:43 memory:84400000-84400fff *-pci:2 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 3 vendor: Intel Corporation physical id: 1c.2 bus info: pci@0000:00:1c.2 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:5000(size=4096) memory:84900000-84afffff ioport:84b00000(size=2097152) *-usb:0 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:1820(size=32) *-usb:1 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:1840(size=32) *-usb:2 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:1860(size=32) *-usb:3 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:1880(size=32) *-usb:4 description: USB controller product: NM10/ICH7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:23 memory:d0544000-d05443ff *-pci:3 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list resources: ioport:2000(size=4096) memory:d0000000-d00fffff ioport:80000000(size=67108864) *-pcmcia description: CardBus bridge product: PCIxx12 Cardbus Controller vendor: Texas Instruments physical id: 4 bus info: pci@0000:0a:04.0 version: 00 width: 32 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192 resources: irq:17 memory:d0004000-d0004fff ioport:2400(size=256) ioport:2800(size=256) memory:80000000-83ffffff memory:88000000-8bffffff *-firewire description: FireWire (IEEE 1394) product: PCIxx12 OHCI Compliant IEEE 1394 Host Controller vendor: Texas Instruments physical id: 4.1 bus info: pci@0000:0a:04.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm ohci bus_master cap_list configuration: driver=firewire_ohci latency=64 maxlatency=4 mingnt=3 resources: irq:17 memory:d0007000-d00077ff memory:d0000000-d0003fff *-storage description: Mass storage controller product: 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) vendor: Texas Instruments physical id: 4.2 bus info: pci@0000:0a:04.2 version: 00 width: 32 bits clock: 33MHz capabilities: storage pm bus_master cap_list configuration: driver=tifm_7xx1 latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0005000-d0005fff *-generic description: SD Host controller product: PCIxx12 SDA Standard Compliant SD Host Controller vendor: Texas Instruments physical id: 4.3 bus info: pci@0000:0a:04.3 version: 00 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=sdhci-pci latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0007800-d00078ff *-network description: Ethernet interface product: PRO/100 VE Network Connection vendor: Intel Corporation physical id: 8 bus info: pci@0000:0a:08.0 logical name: eth0 version: 02 serial: 00:16:36:80:e9:92 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half latency=64 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10Mbit/s resources: irq:20 memory:d0006000-d0006fff ioport:2000(size=64) *-isa description: ISA bridge product: 82801GBM (ICH7-M) LPC Interface Bridge vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-ide description: IDE interface product: 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:18b0(size=16) *-serial UNCLAIMED description: SMBus product: NM10/ICH7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:18c0(size=32) *-scsi physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: ST9250421AS vendor: Seagate physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: SD13 serial: 5TH0B2HB size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000d7fd5 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 13bb4bdd-8cc9-40e2-a490-dbe436c2a02d size: 230GiB capacity: 230GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2014-06-01 17:37:01 filesystem=ext4 lastmountpoint=/ modified=2014-06-01 21:15:21 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2014-06-01 21:15:21 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 2037MiB capacity: 2037MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 2037MiB capabilities: nofs *-remoteaccess UNCLAIMED vendor: Intel physical id: 1 capabilities: inbound kyra@kyra-Satellite-P105:~$

    Read the article

  • ON DELETE RESTRICT Causing Error 150

    - by Levi Hackwith
    CREATE TABLE project ( id INTEGER NOT NULL AUTO_INCREMENT, created_at DATETIME NOT NULL, name VARCHAR(75) NOT NULL, description LONGTEXT NOT NULL, is_active TINYINT NOT NULL DEFAULT '1', PRIMARY KEY (id), INDEX(name, created_at) ) ENGINE = INNODB; CREATE TABLE role ( id INTEGER NOT NULL, name VARCHAR(50) NOT NULL, description LONGTEXT NOT NULL, PRIMARY KEY (id) ) ENGINE = INNODB; CREATE TABLE organization ( id INTEGER NOT NULL AUTO_INCREMENT, created_at DATETIME NOT NULL, name VARCHAR(100) NOT NULL, is_active TINYINT NOT NULL DEFAULT '1', PRIMARY KEY (id) ) ENGINE = INNODB; CREATE TABLE user ( id INTEGER NOT NULL AUTO_INCREMENT, created_at DATETIME NOT NULL, role_id INTEGER NOT NULL, organization_id INTEGER NOT NULL, last_login_at DATETIME NOT NULL, last_ip_address VARCHAR(25) NOT NULL, username VARCHAR(45) NOT NULL, password CHAR(32) NOT NULL, email_address VARCHAR(255) NOT NULL, first_name VARCHAR(45) NOT NULL, last_name VARCHAR(45) NOT NULL, address_1 VARCHAR(100) NOT NULL, address_2 VARCHAR(25) NULL, city VARCHAR(25) NOT NULL, state CHAR(2) NOT NULL, zip_code VARCHAR(10) NOT NULL, primary_phone_number VARCHAR(10) NOT NULL, secondary_phone_number VARCHAR(10) NOT NULL, is_primary_organization_contact TINYINT NOT NULL DEFAULT '0', is_active TINYINT NOT NULL DEFAULT '1', PRIMARY KEY (id), CONSTRAINT fk_user_role_id FOREIGN KEY (role_id) REFERENCES role (id) ON UPDATE RESTRICT ON DELETE RESTRICT, CONSTRAINT fk_user_organization_id FOREIGN KEY (organization_id) REFERENCES organization (id) ON UPDATE RESTRICT ON DELETE RESTRICT ) ENGINE = INNODB; CREATE TABLE project_user ( user_id INTEGER NOT NULL, project_id INTEGER NOT NULL, PRIMARY KEY (user_id, project_id), CONSTRAINT fk_project_user_user_id FOREIGN KEY (user_id) REFERENCES user (id) ON UPDATE RESTRICT ON DELETE CASCADE, CONSTRAINT fk_project_user_project_id FOREIGN KEY (project_id) REFERENCES project (id) ON UPDATE RESTRICT ON DELETE RESTRICT ) ENGINE = INNODB; CREATE TABLE ticket_category ( id INTEGER NOT NULL AUTO_INCREMENT, name VARCHAR(20) NOT NULL, description LONGTEXT NOT NULL, PRIMARY KEY (id) ) ENGINE = INNODB; CREATE TABLE ticket_type ( id INTEGER NOT NULL AUTO_INCREMENT, name VARCHAR(20) NOT NULL, description LONGTEXT NOT NULL, PRIMARY KEY (id) ) ENGINE = INNODB; CREATE TABLE ticket_status ( id INTEGER NOT NULL AUTO_INCREMENT, name VARCHAR(20) NOT NULL, description LONGTEXT NOT NULL, PRIMARY KEY (id) ) ENGINE = INNODB; CREATE TABLE ticket ( id INTEGER NOT NULL AUTO_INCREMENT, created_at DATETIME NOT NULL, project_id INTEGER NOT NULL, created_by INTEGER NOT NULL, submitted_by INTEGER NOT NULL, assigned_to INTEGER NULL, category_id INTEGER NOT NULL, type_id INTEGER NOT NULL, title VARCHAR(75) NOT NULL, description LONGTEXT NOT NULL, contact_type_id TINYINT NOT NULL, affects_all_clients TINYINT NOT NULL DEFAULT '0', is_billable TINYINT NOT NULL DEFAULT '1', esimated_hours DECIMAL(4, 1) NOT NULL DEFAULT '0', hours_worked DECIMAL (4, 1) NOT NULL DEFAULT '0', status_id TINYINT NOT NULL, PRIMARY KEY (id), CONSTRAINT fk_ticket_project_id FOREIGN KEY (project_id) REFERENCES project (id) ON UPDATE RESTRICT ON DELETE RESTRICT, CONSTRAINT fk_ticket_created_by FOREIGN KEY (created_by) REFERENCES user (id) ON UPDATE RESTRICT ON DELETE RESTRICT, CONSTRAINT fk_ticket_submitted_by FOREIGN KEY (submitted_by) REFERENCES user (id) ON UPDATE RESTRICT ON DELETE RESTRICT, CONSTRAINT fk_ticket_assigned_to FOREIGN KEY (assigned_to) REFERENCES user (id) ON UPDATE RESTRICT ON DELETE RESTRICT, CONSTRAINT fk_ticket_category_id FOREIGN KEY (category_id) REFERENCES ticket_category (id) ON UPDATE RESTRICT ON DELETE RESTRICT, CONSTRAINT fk_ticket_type_id FOREIGN KEY (type_id) REFERENCES ticket_type (id) ON UPDATE RESTRICT ON DELETE RESTRICT, CONSTRAINT fk_ticket_status_id FOREIGN KEY (status_id) REFERENCES ticket_status (id) ON UPDATE RESTRICT ON DELETE RESTRICT ) ENGINE = INNODB; CREATE TABLE ticket_time_entry ( id INTEGER NOT NULL AUTO_INCREMENT, user_id INTEGER NOT NULL, ticket_id INTEGER NOT NULL, started_at DATETIME NOT NULL, ended_at DATETIME NOT NULL, PRIMARY KEY (id), CONSTRAINT fk_ticket_time_entry_user_id FOREIGN KEY (user_id) REFERENCES user (id) ON UPDATE RESTRICT ON DELETE RESTRICT, CONSTRAINT fk_ticket_time_entry_ticket_id FOREIGN KEY (ticket_id) REFERENCES ticket (id) ON UPDATE RESTRICT ON DELETE RESTRICT ) ENGINE = INNODB; The ticket table's create statement causes an error 150. I have no clue why. When I remove the ON DELETE RESTRICT statements from the table declaration, it works. Why is that?

    Read the article

  • Not Jailbroken - getting Provisioning is not applicable for product type 'Application' in SDK Device

    - by quantumpotato
    Codesign warning: provisioning is not applicable for product type 'Application' in SDK Device - iPhone OS3.1'; ignoring.. Redownloaded my developer certificate, made a new provisioning profile, still getting this error. Searched the Xcode project and removed all lines referencing a Provisioning Profile, but that didn't seem to remove it from the project settings (went to show package contents, then opened the project file). Was originally on a different machine then transferred over, if that makes a difference? Thanks

    Read the article

  • SharePoint 2010: WebPartZone not rendered when i'm not signed in

    - by Michael
    Hi all! I have a custom WebPart on my welcome page in SharePoint 2010. When I open the page without signing on, the whole WebPartZone remains unrendered (according to the responded html). When signed in, my WebPart works perfectly. Afaik, my WebPart does not require any special permission, it just pulls content from some lists on the same SharePoint site. Any ideas? thx, M

    Read the article

  • Ubuntu 12.04 + Wifi not working

    - by user171154
    i'm having problems connecting over wireless. At the moment, I'm using wicd. It seems to get stuck on "Verifying AP association...". Without wicd I can get the connection up and ping the Net - but if I take eth0 down (ifconfig eth0 down), my wireless goes away too (same result if I unplug the wire instead). wicd is the only way I can bring eth0 back (which is the main reason I'm using it) - ifconfig eth0 and/or ifup eth0 do not re-enable the connection (I just discovered it leaves out the gateway. Adding the gateway back in re-enables the connection including wifi; I didn't want to delete the info about wicd above in case it gives someone an idea.) Doing it manually, despite the errors (which it would be nice to also resolve) - allows me to ping the outside world: ifup wlan0 ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument ssh stop/waiting ssh start/running, process 17336 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=43 time=48.8 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=43 time=47.9 ms 64 bytes from 8.8.8.8: icmp_req=3 ttl=43 time=48.7 ms 64 bytes from 8.8.8.8: icmp_req=4 ttl=43 time=53.2 ms --- 8.8.8.8 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 47.975/49.711/53.235/2.063 ms # iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TPLINK" Mode:Managed Frequency:2.427 GHz Access Point: 64:66:xx:xx:xx:22 Bit Rate=108 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:3 Missed beacon:0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: f0:7d:68:c1:b4:13 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-67-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:dfbf0000-dfbfffff ip route default via 192.168.0.1 dev eth0 default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 (For the record, I have no idea what the 169.254.0.0 address is doing there.) uname -a 3.2.0-67-generic-pae #101-Ubuntu SMP Tue Jul 15 18:04:54 UTC 2014 i686 i686 i386 GNU/Linux lshw -C network *-network description: Ethernet interface product: NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 01 serial: 00:11:11:59:fc:09 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5751-v3.23a ip=192.168.0.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:dfcf0000-dfcfffff *-network description: Wireless interface product: AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) vendor: Qualcomm Atheros physical id: 0 /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback source /etc/network/interfaces.eth0 source /etc/network/interfaces.wlan0 /etc/network/interfaces.eth0 #Main Interface auto eth0 iface eth0 inet static address 192.168.0.102 netmask 255.255.255.0 gateway 192.168.0.1 /etc/network/interfaces.wlan0 auto wlan0 iface wlan0 inet static address 192.168.0.12 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 netmask 255.255.255.0 wpa-driver wext wpa-ssid TPLINK wpa-ap-scan 1 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk dca1badb5fd4e9axxx4xxdaaxxfa91xx610bxx6a7d57ef67af9809dxx6af42e39 /etc/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant network={ ssid="TPLINK" psk="my password" key_mgmt=WPA-PSK proto=RSN pairwise=CCMP group=CCMP } ifdown eth0 ifdown: interface eth0 not configured ifconfig eth0 Link encap:Ethernet HWaddr 00:11:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:213690 errors:0 dropped:0 overruns:0 frame:0 TX packets:155266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:220057808 (220.0 MB) TX bytes:21137696 (21.1 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196412 errors:0 dropped:0 overruns:0 frame:0 TX packets:196412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270697 (153.2 MB) TX bytes:153270697 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11335 errors:0 dropped:0 overruns:0 frame:0 TX packets:7287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2563290 (2.5 MB) TX bytes:855746 (855.7 KB) ifconfig eth0 down ifconfig eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:192 (192.0 B) TX bytes:94 (94.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196418 errors:0 dropped:0 overruns:0 frame:0 TX packets:196418 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270871 (153.2 MB) TX bytes:153270871 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11359 errors:0 dropped:0 overruns:0 frame:0 TX packets:7293 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2565482 (2.5 MB) TX bytes:856363 (856.3 KB) ip route default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. --- 8.8.8.8 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3024ms ping -I eth0 -c 3 router PING router (192.168.0.1) from 192.168.0.102 eth0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2015ms ping -I wlan0 -c 3 router PING router (192.168.0.1) from 192.168.0.12 wlan0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms Let me know if you need more info. Thank you in advance.

    Read the article

  • Character jump animation is not working when i hit the space bar

    - by muzzy
    i am having an issue with my game in XNA. My jump sprite sheet for my character does not trigger when i hit the space bar. I cant seem to find the problem. Please help me. I am also put the code below to make things easier. namespace WindowsGame4 { public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; // start of new code Texture2D playerWalk; // sprite sheet of walk cycle (14 frames) Texture2D idle; // idle animation Texture2D jump; // jump animation Vector2 playerPos; // to hold x and y position info for the player Point frameDimensions; // to hold width and height values for the frames int presentFrame; // to record which frame we are on at any given time int noOfFrames; // to hold the total number of frames in the spritesheet int elapsedTime; // to know how long each frame has been shown int frameDuration; // to hold info about how long each frame should be shown SpriteEffects flipDirection; // SpriteEffects object int speed; //rate of movement int upMovement; int downMovement; int rightMovement; int leftMovement; int jumpApex; string state; //this is going to be "idle","walking" or "jumping". KeyboardState previousKeyboardState; Vector2 originalPlayerPos; Vector2 movementDirection; Vector2 movementSpeed; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; } protected override void Initialize() { // textures will be defined in the LoadContent() method playerPos = new Vector2(0, 200); // starting position for the player is at the left of the screen, and a Y position of 200 frameDimensions = new Point(55, 65); // each frame in the idle sprite sheet is 55 wide by 65 high presentFrame = 0; // start at frame 0 noOfFrames = 5; // there are 5 frames in the idle cycle elapsedTime = 0; // set elapsed time to start at 0 frameDuration = 80; // 80 milliseconds is how long each frame will show for (the higher the number, the slower the animation) flipDirection = SpriteEffects.None; // set the value of flipDirection to none speed = 200; upMovement = -2; downMovement = 2; rightMovement = 1; leftMovement = -1; jumpApex = 100; state = "idle"; previousKeyboardState = Keyboard.GetState(); originalPlayerPos = Vector2.Zero; movementDirection = Vector2.Zero; movementSpeed = Vector2.Zero; base.Initialize(); } protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); playerWalk = Content.Load<Texture2D>("sprites/walkSmall"); // load the walk cycle spritesheet idle = Content.Load<Texture2D>("sprites/idleCycle"); // load the idle cycle sprite sheet jump = Content.Load<Texture2D>("sprites/jump"); // load the jump cycle sprite sheet } protected override void UnloadContent() // we're not using this method at the moment { } protected override void Update(GameTime gameTime) // Update method - used it to call a number of other methods { if (Keyboard.GetState().IsKeyDown(Keys.Escape)) { this.Exit(); // Exit the game if the Escape key is pressed } KeyboardState presentKeyboardState = Keyboard.GetState(); UpdateMovement(presentKeyboardState, gameTime); UpdateIdle(presentKeyboardState, gameTime); UpdateJump(presentKeyboardState); UpdateAnimation(gameTime); playerPos += movementDirection * movementSpeed * (float)gameTime.ElapsedGameTime.TotalSeconds; previousKeyboardState = presentKeyboardState; base.Update(gameTime); } private void UpdateAnimation(GameTime gameTime) { elapsedTime += gameTime.ElapsedGameTime.Milliseconds; if (elapsedTime > frameDuration) { elapsedTime -= frameDuration; elapsedTime = elapsedTime - frameDuration; presentFrame++; if (presentFrame > noOfFrames) if (state != "jumping") { presentFrame = 0; } else { presentFrame = 8; } } } protected void UpdateMovement(KeyboardState presentKeyboardState, GameTime gameTime) { if (state == "idle") { movementSpeed = Vector2.Zero; movementDirection = Vector2.Zero; if (presentKeyboardState.IsKeyDown(Keys.Left)) { state = "walking"; movementSpeed.X = speed; movementDirection.X = leftMovement; flipDirection = SpriteEffects.FlipHorizontally; } if (presentKeyboardState.IsKeyDown(Keys.Right)) { state = "walking"; movementSpeed.X = speed; movementDirection.X = rightMovement; flipDirection = SpriteEffects.None; } } } private void UpdateIdle(KeyboardState presentKeyboardState, GameTime gameTime) { if ((presentKeyboardState.IsKeyUp(Keys.Left) && previousKeyboardState.IsKeyDown(Keys.Left) || presentKeyboardState.IsKeyUp(Keys.Right) && previousKeyboardState.IsKeyDown(Keys.Right) && state != "jumping")) { state = "idle"; } } private void UpdateJump(KeyboardState presentKeyboardState) { if (state == "walking" || state == "idle") { if (presentKeyboardState.IsKeyDown(Keys.Space) && !presentKeyboardState.IsKeyDown(Keys.Space)) { presentFrame = 1; DoJump(); } } if (state == "jumping") { if (originalPlayerPos.Y - playerPos.Y > jumpApex) { movementDirection.Y = downMovement; } if (playerPos.Y > originalPlayerPos.Y) { playerPos.Y = originalPlayerPos.Y; state = "idle"; movementDirection = Vector2.Zero; } } } private void DoJump() { if (state != "jumping") { state = "jumping"; originalPlayerPos = playerPos; movementDirection.Y = upMovement; movementSpeed = new Vector2(speed, speed); } } protected override void Draw(GameTime gameTime) // Draw method { GraphicsDevice.Clear(Color.CornflowerBlue); spriteBatch.Begin(); // begin the spritebatch if (state == "walking") { noOfFrames = 14; frameDimensions = new Point(55, 65); Vector2 playerWalkPos = new Vector2(playerPos.X, playerPos.Y - 28); spriteBatch.Draw(playerWalk, playerWalkPos, new Rectangle((presentFrame * frameDimensions.X), 0, frameDimensions.X, frameDimensions.Y), Color.White, 0, Vector2.Zero, 1, flipDirection, 0); } if (state == "idle") { noOfFrames = 5; frameDimensions = new Point(55, 65); Vector2 idlePos = new Vector2(playerPos.X, playerPos.Y - 28); spriteBatch.Draw(idle, idlePos, new Rectangle((presentFrame * frameDimensions.X), 0, frameDimensions.X, frameDimensions.Y), Color.White, 0, Vector2.Zero, 1, flipDirection, 0); } if (state == "jumping") { noOfFrames = 9; frameDimensions = new Point(55, 92); Vector2 jumpPos = new Vector2(playerPos.X, playerPos.Y - 28); spriteBatch.Draw(jump, jumpPos, new Rectangle((presentFrame * frameDimensions.X), 0, frameDimensions.X, frameDimensions.Y), Color.White, 0, Vector2.Zero, 1, flipDirection, 0); } spriteBatch.End(); // end the spritebatch commands base.Draw(gameTime); } } }

    Read the article

  • BroadcastReciever doesn't show SMS not Send or Not delivered

    - by user1657111
    While using broadcastreciver for checking sms status, it shows the toast when sms is sent but shows nothing when sms is not sent or delivered (im testing it by putting an abrupt number). the code im using is the one ive seen the most on every site of checking sms delivery status. But my code is only showing the status when sms is sent successfully. Can any one get a hint of what am i doing wrong ? I hav this method in doInBackground() and so obviously im using AsyncTask. Thanks guys public void send_SMS(String list, String msg, AtaskClass task) { String SENT = "SMS_SENT"; String DELIVERED = "SMS_DELIVERED"; SmsManager sms = SmsManager.getDefault(); PendingIntent sentPI = PendingIntent.getBroadcast(this, 0, new Intent(SENT), 0); PendingIntent deliveredPI = PendingIntent.getBroadcast(this, 0, new Intent(DELIVERED), 0); //---when the SMS has been sent--- registerReceiver(new BroadcastReceiver(){ @Override public void onReceive(Context context, Intent arg1) { switch (getResultCode()) { case Activity.RESULT_OK: Toast.makeText(context, "SMS sent", Toast.LENGTH_SHORT).show(); break; case SmsManager.RESULT_ERROR_GENERIC_FAILURE: Toast.makeText(context, "Generic failure", Toast.LENGTH_SHORT).show(); break; case SmsManager.RESULT_ERROR_NO_SERVICE: Toast.makeText(context, "No service", Toast.LENGTH_SHORT).show(); break; case SmsManager.RESULT_ERROR_NULL_PDU: Toast.makeText(context, "Null PDU", Toast.LENGTH_SHORT).show(); break; case SmsManager.RESULT_ERROR_RADIO_OFF: Toast.makeText(context, "Radio off", Toast.LENGTH_SHORT).show(); break; } } }, new IntentFilter(SENT)); //---when the SMS has been delivered--- registerReceiver(new BroadcastReceiver(){ @Override public void onReceive(Context context, Intent arg1) { switch (getResultCode()) { case Activity.RESULT_OK: Toast.makeText(context, "SMS delivered", Toast.LENGTH_SHORT).show(); break; case Activity.RESULT_CANCELED: Toast.makeText(context, "SMS not delivered", Toast.LENGTH_SHORT).show(); break; } } }, new IntentFilter(DELIVERED)); StringTokenizer st = new StringTokenizer(list,","); int count= st.countTokens(); int i =1; count = 1; while(st.hasMoreElements()) { // PendingIntent pi = PendingIntent.getActivity(this,0,new Intent(this, SMS.class),0); String tempMobileNumber = (String)st.nextElement(); //SmsManager sms = SmsManager.getDefault(); sms.sendTextMessage(tempMobileNumber, null, msg , sentPI, deliveredPI); Double cCom = ((double)i/count) * 100; int j = cCom.intValue(); task.doProgress(j); i++; count ++; } // class ends }

    Read the article

  • USB keyboard stopped working in Ubuntu with error -71

    - by tapan
    I have a usb keyboard which was working perfectly till now (about a year since i have been regularly using ubuntu). It suddenly stopped working. It stopped working when I connected a USB HDD. Now the keyboard works randomly .. working for a while and then stops working for a longer time. Here is the dmesg output : [ 705.817076] usb 5-1: device not accepting address 8, error -71 [ 705.928032] usb 5-1: new low speed USB device using uhci_hcd and address 9 [ 706.336060] usb 5-1: device not accepting address 9, error -71 [ 706.448055] usb 5-1: new low speed USB device using uhci_hcd and address 10 [ 706.568044] usb 5-1: device descriptor read/64, error -71 [ 706.792049] usb 5-1: device descriptor read/64, error -71 [ 707.008060] usb 5-1: new low speed USB device using uhci_hcd and address 11 [ 707.128041] usb 5-1: device descriptor read/64, error -71 [ 707.352052] usb 5-1: device descriptor read/64, error -71 [ 707.456068] hub 5-0:1.0: unable to enumerate USB device on port 1 Based on the suggestions here i tried the following two things: echo -1 > /sys/module/usbcore/parameters/autosuspend echo Y > /sys/module/usbcore/parameters/old_scheme_first However, i am still facing the same problem. Can anyone help me out with this ? I'm using Ubuntu 10.04 Lucid Lynx.

    Read the article

  • UltraSurf not working, used to work on same network (and is working fine on friend's computer on same network)

    - by Kush
    I'm using UltraSurf (10.17), it used to work fine but now its not working on my computer (Windows 7) and the window keeps showing "Connecting Server..." and after sometime, it fails to establish the connection. While, its working perfectly on the friend's computer on the same network. Any help will be appreciated. (Please note that using Proxifier would be my last option if I can't get UltraSurf working anyway).

    Read the article

  • iCloud stuff stops working while connected to OpenVPN

    - by Taco Bob
    I have a fairly simple OpenVPN setup on an OpenVZ VPS with Ubuntu 11.10. Client is the Viscosity client on Mac OS X 10.8.2, and after some testing, we can rule out the client as being part of the problem. Everything has been working fine except for Apple's iCloud stuff. Web surfing, email, FTP, NNTP, and Skype are all working as expected. It's ONLY the iCloud services that cease to function. If I connect to the VPN, iCloud stuff stops working. I no longer get anything in Messages, Calendar items don't get updated, and Notifications stop working. If I disconnect, the iCloud stuff all starts working. Connect again, iCloud stops working. Here's the server.conf: status openvpn-status.log log /var/log/openvpn.log verb 4 port 1194 proto udp dev tun ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh1024.pem server 10.9.8.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1" push “dhcp-option DNS 10.9.8.1? keepalive 10 120 duplicate-cn cipher BF-CBC comp-lzo user nobody group nogroup persist-key persist-tun tun-mtu 1500 mssfix 1400 I'm using iptables in a script, and it's also fairly simplistic. iptables -F iptables -t nat -F iptables -t mangle -F iptables -A FORWARD -i tun0 -o venet0 -j ACCEPT iptables -A FORWARD -i venet0 -o tun0 -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A INPUT -p tcp --dport 1194 -j ACCEPT iptables -A INPUT -p udp --dport 1194 -j ACCEPT iptables -t nat -A POSTROUTING -s 10.9.8.0/24 -j SNAT --to-source <server's public ip> echo 1 > /proc/sys/net/ipv4/ip_forward I tried forwarding ports as well, with no success. iptables -A FORWARD -p tcp -d 10.9.8.0/24 --dport 5222:5230 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 5222:5230 -j DNAT --to-destination 10.9.8.6 I am also sometimes behind a double-NAT situation that I have no control over. Client -> work VPN -> my OpenVPN box -> Internet. Client -> Airport Express -> ISP (which is doing NAT) -> my OpenVPN box -> Internet. Those two situations are just the fact of life where I am, and I cannot change them. I do have full control over my client and the OpenVPN server. I am completely out of ideas. I have posted a similar query at the OpenVPN forums, but it hasn't posted yet and seems to be in their moderation queue still. Tried on freenode irc channels, but nobody is awake, so here I am. I have Googled extensively for this, and can find nothing that is related. Help me get iCloud stuff working again! (I tried serverfault, it was closed as off-topic. I'm trying here and the Unix site as well. Here because it's a more general audience that might know more about OpenVPN based on the number of questions I see asked about it) EDIT: -I have also tried upgrading to Version: 2.3-beta1-debian0 - issue persists. -Removed all iptables rules except for the ones that flush -left this rule:iptables -t nat -A POSTROUTING -s 10.9.8.0/24 -j SNAT --to-source (server ip) -added iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT still, nothing works. I can see traffic in tcpdump on the server if i watch the tunnel: 20:03:48.702835 IP nk11p01st-courier105-bz.push.apple.com.5223 10.9.8.6.60772: Flags [F.], seq 2635, ack 1218, win 76, options [nop,nop,TS val 914984811 ecr 745921298], length 0 20:03:48.911244 IP 10.9.8.6.60772 nk11p01st-courier105-bz.push.apple.com.5223: Flags [R], seq 3621143451, win 0, length 0 But still, no push messages/notifications are ever delivered. :/ EDIT: * Further testing indicates that it might actually be the client after all.

    Read the article

  • stored procedure in mysql not working in 64 bit windows server 2008

    - by abhi
    i have application in spring .its is deployed in Linux machine and windows server 2008. i am using mysql 5.5.32 in my linux server and mysql 5.5.13 in windows server 2008. stored procedure in mysql is working perfectly in Linux machine but while calling stored procedure from windows,its is working partially that is some integer values is set as 0.if i restart the tomcat and call that stored procrdure then t is working. i dont know the exact reason .can any one help me to find issue.thanks in advance

    Read the article

  • Notebook display not working properly

    - by jfcfar
    I have an old Acer TM4001 notebook. If the laptop is powered-off, with the lid closed, when I power it on, it generally works. Then, without touching anything, if I reboot the computer the internal display wil not work anymore. To make it working again I need to shut down the pc, close and reopen the lid and then turn it on. If I close and reopen the lid if it is not working after power the pc on, it won't work. When the screen is working, closing and opening it has no effect (the data cable seems ok). The external monitor always works as expected: If the internal display is not detected, the external will be the main (and only) display. This is not OS-related. When the screen is not working I cannot see the POST. What could be the cause for this?

    Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >