Search Results

Search found 32290 results on 1292 pages for 'array key'.

Page 340/1292 | < Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >

  • How to make an equation span the whole page / line in LaTeX?

    - by Reed Richards
    I have this equation and it's quite big (basically a FDM one) but it aligns with the text and then continues out on the right side to the nothingness. I've tried stuff like \begin{center} and \hspace*{-2.5cm} but to no avail. I want it to use the whole line not just from the left-margin and out to the right. How do I do it and do I need to install some special package for it? I use the \[ instead of the displaymath like this \[ Equation arrays here \] The code \[ \left( \begin{array}{cccccc} -(2\kappa+\frac{hV\rho}{2}) & (\frac{hV\rho}{2}-\kappa) & 0 & \cdots & 0 \\ -\kappa & -(2\kappa+\frac{hV\rho}{2}) & (\frac{hV\rho}{2}-\kappa) & 0 & \cdots \\ 0 & -\kappa & -(2\kappa+\frac{hV\rho}{2}) & (\frac{hV\rho}{2}-\kappa) & 0 & \cdots \\ \vdots & 0 & \ddots & \vdots \\ \vdots & \vdots & \vdots & -\kappa & -(2\kappa+\frac{hV\rho}{2}) & (\frac{hV\rho}{2}-\kappa) \\ 0 & \vdots & \vdots & 0 & \kappa - \frac{2h\kappa_{v}}{\kappa}(\frac{hv\rho}{2} - \kappa) & -2\kappa \\ \end{array} \right) \left( \begin{array}{c} T_{1} \\ T_{2} \\ \vdots \\ T_{n} \\ \end{array} \right) = \left( \begin{array}{c} Q(0) + \kappa T_{0} \\ Q(h) \\ Q(2h) \\ \vdots \\ Q((n-1)h) \\ 2\frac{\kappa_{v}}{\kappa_{v}}T_{out} \\ \end{array} \right) \]

    Read the article

  • dynamically created arrays

    - by DevAno1
    My task consists of two parts. First I have to create globbal char array of 100 elements, and insert some text to it using cin. Afterwards calculate amount of chars, and create dedicated array with the length of the inputted text. I was thinking about following solution : char[100]inputData; int main() { cin >> inputData >> endl; int length=0; for(int i=0; i<100; i++) { while(inputData[i] == "\0") { ++count; } } char c = new char[count]; Am I thinking good ? Second part of the task is to introduce in the first program dynamically created array of pointers to all inserted words. Adding a new word should print all the previous words and if there is no space for next words, size of the inputData array should be increased twice. And to be honest this is a bit too much for me. How I can create pointers to words specifically ? And how can I increase the size of global array without loosing its content ? With some temporary array ?

    Read the article

  • Memory leak when returning object

    - by Yakattak
    I have this memory leak that has been very stubborn for the past week or so. I have a class method I use in a class called "ArchiveManager" that will unarchive a specific .dat file for me, and return an array with it's contents. Here is the method: +(NSMutableArray *)unarchiveCustomObject { NSMutableArray *array = [NSMutableArray arrayWithArray:[NSKeyedUnarchiver unarchiveObjectWithFile:/* Archive Path */]]; return array; } I understand I don't have ownership of it at this point, and I return it. CustomObject *myObject = [[ArchiveManager unarchiveCustomObject] objectAtIndex:0]; Then, later when I unarchive it in a view controller to be used (I don't even create an array of it, nor do I make a pointer to it, I just reference it to get something out of the array returned by unarchiveCustomIbject (objectAtIndex). This is where Instruments is calling a memory leak, yet I don't see how this can leak! Any ideas? Thanks in advance. Edit: CustomObject initWithCoder added: -(id)initWithCoder:(NSCoder *)aDecoder { if (self = [super init]) { self.string1 = [aDecoder decodeObjectForKey:kString1]; self.string2 = [aDecoder decodeObjectForKey:kString2]; self.string3 = [aDecoder decodeObjectForKey:kString3]; UIImage *picture = [[UIImage alloc] initWithData:[aDecoder decodeObjectForKey:kPicture]]; self.picture = picture; self.array = [aDecoder decodeObjectForKey:kArray]; [picture release]; } return self; }

    Read the article

  • How to query JDO persistent objects in unowned relationship model?

    - by Paul B
    Hello, I'm trying to migrate my app from PHP and RDBMS (MySQL) to Google App Engine and have a hard time figuring out data model and relationships in JDO. In my current app I use a lot of JOIN queries like: SELECT users.name, comments.comment FROM users, comments WHERE users.user_id = comments.user_id AND users.email = '[email protected]' As I understand, JOIN queries are not supported in this way so the only(?) way to store data is using unowned relationships and "foreign" keys. There is a documentation regarding that, but no useful examples. So far I have something like this: @PersistenceCapable public class Users {     @PrimaryKey     @Persistent(valueStrategy = IdGeneratorStrategy.IDENTITY)     private Key key;     @Persistent     private String name;         @Persistent     private String email;         @Persistent     private Set<Key> commentKeys;     // Accessors... } @PersistenceCapable public class Comments {     @PrimaryKey     @Persistent(valueStrategy = IdGeneratorStrategy.IDENTITY)     private Key key;     @Persistent     private String comment;         @Persistent     private Date commentDate;     @Persistent     private Key userKey;     // Accessors... } So, how do I get a list with commenter's name, comment and date in one query? I see how I probably could get away with 3 queries but that seems wrong and would create unnecessary overhead. Please, help me out with some code examples. -- Paul.

    Read the article

  • NSArrayController not working with NSMutableDictionary for NSTableView

    - by Miraaj
    Hi all, I am trying to display content in NSTableView using NSMutableArrayController of NSMutableDictionary records. I followed steps written below: In application delegate class, I created an NSMutableArray object with name 'geniuses' and stored some NSMutableDictionary objects with keys: 'geniusName' and 'domain'. I took an NSArrayController object in IB, binded its controller content property to application delegate class, and set its model key path to 'geniuses'. In attribute inspector pane set mode as class and class name as NSMutableDictionary. Added keys: 'geniusName' and 'domain' to it. In IB I took a table view object. Binded its content property to array controller, controller key path set as arranged objects. Binded value property of its first column to array controller, controller key path set as arranged objects, model key path set as 'geniusName'. Binded value property of its second column to array controller, controller key path set as arranged objects, model key path set as 'geniusName'. After following these steps when I tried to build and run the project I found un-populated table view. You can find my code here. Can anyone suggest me where I may be wrong? Thanks, Miraaj

    Read the article

  • Error Converting PIL B&W images to Numpy Arrays

    - by Elliot
    I am getting weird errors when I try to convert a black and white PIL image to a numpy array. An example of the code I am working with is below. if image.mode != '1': image = image.convert('1') #convert to B&W data = np.array(image) #convert data to a numpy array n_lines = data.shape[0] #number of raster passes line_range = range(data.shape[1]) for l in range(n_lines): # process one horizontal line of the image line = data[l] for n in line_range: if line[n] == 1: write_line_to(xl, z+scale*n, speed) #conversion to other program code elif line[n] == 0: run_to(xl, z+scale*n) #conversion to other program code I have tried this using both array and asarray for the conversion, and gotten different errors. If I use array, then the data I get out is nothing like what I put in. It looks like several very shrunken partial images side by side, with the remainder of the image space filled in in black. If I use asarray, then the entirety of python crashes during the raster step (on a random line). If I work with a greyscale image ('L'), then neither of these errors occurs for either array or asarray. Does anyone know what I am doing wrong? Is there something odd about the way PIL encodes B&W images, or something special I need to pass numpy to make it convert properly?

    Read the article

  • function in php for displaying a menu

    - by Stanislas Piotrowski
    I met some trouble with a function I have written. In fact I have an array in which I have different custom values. I would like to display the result of that, so here is my function function getAccess($var){ $data=mysql_fetch_array(mysql_query("SELECT * FROM `acces` WHERE `id`='.$var.'")); return $data; } getAccess($_SESSION['id']); $paramAcces = array( 'comptesfinanciers' => array( 'libelle' => 'COMPTES FINANCIERS', 'acces' => $data['comptesfinanciers'], 'lien' => 'financier', 'image' => 'images/finances.png' ) ); I have done a var_dump of $paramAcces which return array(1) { ["comptesfinanciers"]=> array(4) { ["libelle"]=> string(18) "COMPTES FINANCIERS" ["acces"]=> NULL ["lien"]=> string(9) "financier" ["image"]=> string(19) "images/finances.png" } } (that are the ecpected values). Here is the function for displaying what is in the array /** * AFFICHAGE DE LA SECTION PARAMETRES SUR LA PAGE D'ACCUEIL */ function affichParam($paramAccees){ echo '<ul class="getcash-vmenu"><li><a href="index.php?p='.$paramAccees['lien'].'" class="active"><span class="t"><img src="'.$paramAccees['image'].'"> '.$paramAccees['libelle'].'</span></a></li></ul>'; } The trouble is that actualy it return to me an empty line. I really do not know what I'm wrong doin: I call the function like that: <?php affichParam($paramAccees) ?> In a second time I will add more value, so I think I will have to do a for each loop or something like that. But actualy I just would like to display the first record. Any kind of help will be much apprecitaed

    Read the article

  • Java Polynomial Multiplication with ArrayList

    - by user1506919
    I am having a problem with one of my methods in my program. The method is designed to take 2 arraylists and the perform multiplication between the two like a polynomial. For example, if I was to say list1={3,2,1} and list2={5,6,7}; I am trying to get a return value of 15,28,38,20,7. However, all I can get is an error message that says: Exception in thread "main" java.lang.IndexOutOfBoundsException: Index: 0, Size: 0. I have provided the method below: private static ArrayList<Integer> multiply(ArrayList<Integer> list1,ArrayList<Integer> list2) { ArrayList<Integer> array =new ArrayList<Integer>(list1.size()+list2.size()); for (int i=0;i<array.size();i++) array.add(i, 0); for (int i = 0; i < list1.size(); i++) for (int j = 0; j < list2.size(); j++) array.set(i+j, ((list1.get(i) * list2.get(j))+array.get(i+j))); return array; } Any help with solving this problem is greatly appreciated.

    Read the article

  • How to check if JavaScript object is JSON

    - by Wei Hao
    I have a nested JSON object that I need to loop through, and the value of each key could be a String, JSON array or another JSON object. Depending on the type of object, I need to carry out different operations. Is there any way I can check the type of the object to see if it is a String, JSON object or JSON array? I tried using typeof and instanceof but both didn't seem to work, as typeof will return an object for both JSON object and array, and instanceof gives an error when I do obj instanceof JSON. To be more specific, after parsing the JSON into a JS object, is there any way I can check if it is a normal string, or an object with keys and values (from a JSON object), or an array (from a JSON array)? For example: JSON var data = {"hi": {"hello": ["hi1","hi2"] }, "hey":"words" } JavaScript var jsonObj = JSON.parse(data); var level1 = jsonObj.hi; var text = jsonObj.hey; var arr = level1.hello; //how to check if level1 was formerly a JSON object? //how to check if arr was formerly a JSON array? //how to check if text is a string?

    Read the article

  • Understanding Symbols In Ruby

    - by Kezzer
    Despite reading this article, I'm still confused as to the representation of the data in memory when it comes to using symbols. If a symbol, two of them contained in different objects, exist in the same memory location, then how is it that they contain different values? I'd have expected the same memory location to contain the same value. As a quote from the link: Unlike strings, symbols of the same name are initialized and exist in memory only once during a session of ruby I just don't understand how it manages to differentiate the values contained in the same memory location. EDIT So let's consider the example: patient1 = { :ruby => "red" } patient2 = { :ruby => "programming" } patient1.each_key {|key| puts key.object_id.to_s} 3918094 patient2.each_key {|key| puts key.object_id.to_s} 3918094 patient1 and patient2 are both hashes, that's fine. :ruby however is a symbol. If we were to output the following: patient1.each_key {|key| puts key.to_s} Then what will be output? "red", or "programming"? FURTHER EDIT I'm still really quite confused. I'm thinking a symbol is a pointer to a value. Let's forget hashes for a second. The questions I have are; can you assign a value to a symbol? Is a symbol just a pointer to a variable with a value in it? If symbols are global, does that mean a symbol always points to one thing?

    Read the article

  • Problem with sorting NSDictionary

    - by Stas Dmitrenko
    Hello. I need to sort a NSDictionary of dictionaries. It looks like: {//dictionary RU = "110.1"; //key and value SG = "150.2"; //key and value US = "50.3"; //key and value } Result need to be like: {//dictionary SG = "150.2"; //key and value RU = "110.1"; //key and value US = "50.3"; //key and value } I am trying this: @implementation NSMutableDictionary (sorting) -(NSMutableDictionary*)sortDictionary { NSArray *allKeys = [self allKeys]; NSMutableArray *allValues = [NSMutableArray array]; NSMutableArray *sortValues= [NSMutableArray array]; NSMutableArray *sortKeys= [NSMutableArray array]; for(int i=0;i<[[self allValues] count];i++) { [allValues addObject:[NSNumber numberWithFloat:[[[self allValues] objectAtIndex:i] floatValue]]]; } [sortValues addObjectsFromArray:allValues]; [sortKeys addObjectsFromArray:[self allKeys]]; [sortValues sortUsingDescriptors:[NSArray arrayWithObject:[[[NSSortDescriptor alloc] initWithKey:@"floatValue" ascending:NO] autorelease]]]; for(int i=0;i<[sortValues count];i++) { [sortKeys replaceObjectAtIndex:i withObject:[allKeys objectAtIndex:[allValues indexOfObject:[sortValues objectAtIndex:i]]]]; [allValues replaceObjectAtIndex:[allValues indexOfObject:[sortValues objectAtIndex:i]] withObject:[NSNull null]]; } NSLog(@"%@", sortKeys); NSLog(@"%@", sortValues); NSLog(@"%@", [NSMutableDictionary dictionaryWithObjects:sortValues forKeys:sortKeys]); return [NSMutableDictionary dictionaryWithObjects:sortValues forKeys:sortKeys]; } @end This is the result of NSLog: 1) { SG, RU, US } 2) { 150.2, 110.1, 50.3 } 3) { RU = "110.1"; SG = "150.2"; US = "50.3"; } Why is this happening? Can you help me with this problem?

    Read the article

  • How do I write this MySQL query?

    - by CT
    I am working on an Asset DB using a lamp stack. In this example consider the following 5 tables: asset, server, laptop, desktop, software All tables have a primary key of id, which is a unique asset id. Every object has all asset attributes and then depending on type of asset has additional attributes in the corresponding table. If the type is a server, desktop or laptop it also has items in the software table. Here are the table create statements: // connect to mysql server and database "asset_db" mysql_connect("localhost", "asset_db", "asset_db") or die(mysql_error()); mysql_select_db("asset_db") or die(mysql_error()); // create asset table mysql_query("CREATE TABLE asset( id VARCHAR(50) PRIMARY KEY, company VARCHAR(50), location VARCHAR(50), purchase_date VARCHAR(50), purchase_order VARCHAR(50), value VARCHAR(50), type VARCHAR(50), notes VARCHAR(200))") or die(mysql_error()); echo "Asset Table Created.</br />"; // create software table mysql_query("CREATE TABLE software( id VARCHAR(50) PRIMARY KEY, software VARCHAR(50), license VARCHAR(50))") or die(mysql_error()); echo "Software Table Created.</br />"; // create laptop table mysql_query("CREATE TABLE laptop( id VARCHAR(50) PRIMARY KEY, manufacturer VARCHAR(50), model VARCHAR(50), serial_number VARCHAR(50), esc VARCHAR(50), user VARCHAR(50), prev_user VARCHAR(50), warranty VARCHAR(50))") or die(mysql_error()); echo "Laptop Table Created.</br />"; // create desktop table mysql_query("CREATE TABLE desktop( id VARCHAR(50) PRIMARY KEY, manufacturer VARCHAR(50), model VARCHAR(50), serial_number VARCHAR(50), esc VARCHAR(50), user VARCHAR(50), prev_user VARCHAR(50), warranty VARCHAR(50))") or die(mysql_error()); echo "Desktop Table Created.</br />"; // create server table mysql_query("CREATE TABLE server( id VARCHAR(50) PRIMARY KEY, manufacturer VARCHAR(50), model VARCHAR(50), warranty VARCHAR(50))") or die(mysql_error()); echo "Server Table Created.</br />"; ?> How do I query the database so that if I search by id, I receive all related fields to that asset id? Thank you.

    Read the article

  • Flex: Linebreak problem with spark.components.TextArea inside a MXDataGridItemRenderer

    - by radgar
    Hi, I have a DataGrid that has a MXDataGridItemRenderer applied as an itemEditor to one of the columns. The editor includes a spark.components.TextArea control. By default, any text item editor of a datagrid closes itself when [enter] key is pressed.. Keeping this in mind; What I want to do is: Prevent editor from closing on [SHIFT+ENTER] key but accept the linebreak (I can do this, see code below) Close the editor on [ENTER] key but do not accept the linebreak (could not achieve this) Here is the current code in the MXDataGridItemRenderer: <s:MXDataGridItemRenderer xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx" focusEnabled="true" > <fx:Script> <![CDATA[ protected function onTxtDataKeyDown(event:KeyboardEvent):void { //Prevent editor from closing on [SHIFT+ENTER] key but accept the linebreak // » this works if (event.shiftKey && event.keyCode == 13) { event.stopImmediatePropagation(); } //Close the editor on [ENTER] key but do not accept the linebreak else if (event.keyCode == 13) { event.preventDefault(); } // » does not work } ]]> </fx:Script> <s:TextArea id="txtData" paddingTop="3" lineBreak="explicit" text="{dataGridListData.label}" verticalScrollPolicy="auto" horizontalScrollPolicy="off" keyDown="onTxtDataKeyDown(event)" /> I also tried the textInput event but that did not do the trick. So: How can I prevent the linebreak when the editor is closed on [enter] key? Any help is appreciated. Thanks. EDIT: If I change the spark.components.TextArea to mx.controls.TextArea, second part with event.preventDefault() will work as expected but then the first part where SHIFT+ENTER accepts the linebreak will not work.

    Read the article

  • Multiple errors while adding searching to app

    - by Thijs
    Hi, I'm fairly new at iOS programming, but I managed to make a (in my opinion quite nice) app for the app store. The main function for my next update will be a search option for the app. I followed a tutorial I found on the internet and adapted it to fit my app. I got back quite some errors, most of which I managed to fix. But now I'm completely stuck and don't know what to do next. I know it's a lot to ask, but if anyone could take a look at the code underneath, it would be greatly appreciated. Thanks! // // RootViewController.m // GGZ info // // Created by Thijs Beckers on 29-12-10. // Copyright 2010 __MyCompanyName__. All rights reserved. // #import "RootViewController.h" // Always import the next level view controller header(s) #import "CourseCodes.h" @implementation RootViewController @synthesize dataForCurrentLevel, tableViewData; #pragma mark - #pragma mark View lifecycle // OVERRIDE METHOD - (void)viewDidLoad { [super viewDidLoad]; // Go get the data for the app... // Create a custom string that points to the right location in the app bundle NSString *pathToPlist = [[NSBundle mainBundle] pathForResource:@"SCSCurriculum" ofType:@"plist"]; // Now, place the result into the dictionary property // Note that we must retain it to keep it around dataForCurrentLevel = [[NSDictionary dictionaryWithContentsOfFile:pathToPlist] retain]; // Place the top level keys (the program codes) in an array for the table view // Note that we must retain it to keep it around // NSDictionary has a really useful instance method - allKeys // The allKeys method returns an array with all of the keys found in (this level of) a dictionary tableViewData = [[[dataForCurrentLevel allKeys] sortedArrayUsingSelector:@selector(caseInsensitiveCompare:)] retain]; //Initialize the copy array. copyListOfItems = [[NSMutableArray alloc] init]; // Set the nav bar title self.title = @"GGZ info"; //Add the search bar self.tableView.tableHeaderView = searchBar; searchBar.autocorrectionType = UITextAutocorrectionTypeNo; searching = NO; letUserSelectRow = YES; } /* - (void)viewWillAppear:(BOOL)animated { [super viewWillAppear:animated]; } */ /* - (void)viewDidAppear:(BOOL)animated { [super viewDidAppear:animated]; } */ /* - (void)viewWillDisappear:(BOOL)animated { [super viewWillDisappear:animated]; } */ /* - (void)viewDidDisappear:(BOOL)animated { [super viewDidDisappear:animated]; } */ //RootViewController.m - (void) searchBarTextDidBeginEditing:(UISearchBar *)theSearchBar { searching = YES; letUserSelectRow = NO; self.tableView.scrollEnabled = NO; //Add the done button. self.navigationItem.rightBarButtonItem = [[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemDone target:self action:@selector(doneSearching_Clicked:)] autorelease]; } - (NSIndexPath *)tableView :(UITableView *)theTableView willSelectRowAtIndexPath:(NSIndexPath *)indexPath { if(letUserSelectRow) return indexPath; else return nil; } //RootViewController.m - (void)searchBar:(UISearchBar *)theSearchBar textDidChange:(NSString *)searchText { //Remove all objects first. [copyListOfItems removeAllObjects]; if([searchText length] &gt; 0) { searching = YES; letUserSelectRow = YES; self.tableView.scrollEnabled = YES; [self searchTableView]; } else { searching = NO; letUserSelectRow = NO; self.tableView.scrollEnabled = NO; } [self.tableView reloadData]; } //RootViewController.m - (void) searchBarSearchButtonClicked:(UISearchBar *)theSearchBar { [self searchTableView]; } - (void) searchTableView { NSString *searchText = searchBar.text; NSMutableArray *searchArray = [[NSMutableArray alloc] init]; for (NSDictionary *dictionary in listOfItems) { NSArray *array = [dictionary objectForKey:@"Countries"]; [searchArray addObjectsFromArray:array]; } for (NSString *sTemp in searchArray) { NSRange titleResultsRange = [sTemp rangeOfString:searchText options:NSCaseInsensitiveSearch]; if (titleResultsRange.length &gt; 0) [copyListOfItems addObject:sTemp]; } [searchArray release]; searchArray = nil; } //RootViewController.m - (void) doneSearching_Clicked:(id)sender { searchBar.text = @""; [searchBar resignFirstResponder]; letUserSelectRow = YES; searching = NO; self.navigationItem.rightBarButtonItem = nil; self.tableView.scrollEnabled = YES; [self.tableView reloadData]; } //RootViewController.m - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { if (searching) return 1; else return [listOfItems count]; } // Customize the number of rows in the table view. - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { if (searching) return [copyListOfItems count]; else { //Number of rows it should expect should be based on the section NSDictionary *dictionary = [listOfItems objectAtIndex:section]; NSArray *array = [dictionary objectForKey:@"Countries"]; return [array count]; } } - (NSString *)tableView:(UITableView *)tableView titleForHeaderInSection:(NSInteger)section { if(searching) return @""; if(section == 0) return @"Countries to visit"; else return @"Countries visited"; } // Customize the appearance of table view cells. - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithFrame:CGRectZero reuseIdentifier:CellIdentifier] autorelease]; } // Set up the cell... if(searching) cell.text = [copyListOfItems objectAtIndex:indexPath.row]; else { //First get the dictionary object NSDictionary *dictionary = [listOfItems objectAtIndex:indexPath.section]; NSArray *array = [dictionary objectForKey:@"Countries"]; NSString *cellValue = [array objectAtIndex:indexPath.row]; cell.text = cellValue; } return cell; } - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { //Get the selected country NSString *selectedCountry = nil; if(searching) selectedCountry = [copyListOfItems objectAtIndex:indexPath.row]; else { NSDictionary *dictionary = [listOfItems objectAtIndex:indexPath.section]; NSArray *array = [dictionary objectForKey:@"Countries"]; selectedCountry = [array objectAtIndex:indexPath.row]; } //Initialize the detail view controller and display it. DetailViewController *dvController = [[DetailViewController alloc] initWithNibName:@"DetailView" bundle:[NSBundle mainBundle]]; dvController.selectedCountry = selectedCountry; [self.navigationController pushViewController:dvController animated:YES]; [dvController release]; dvController = nil; } //RootViewController.m - (void) searchBarTextDidBeginEditing:(UISearchBar *)theSearchBar { //Add the overlay view. if(ovController == nil) ovController = [[OverlayViewController alloc] initWithNibName:@"OverlayView" bundle:[NSBundle mainBundle]]; CGFloat yaxis = self.navigationController.navigationBar.frame.size.height; CGFloat width = self.view.frame.size.width; CGFloat height = self.view.frame.size.height; //Parameters x = origion on x-axis, y = origon on y-axis. CGRect frame = CGRectMake(0, yaxis, width, height); ovController.view.frame = frame; ovController.view.backgroundColor = [UIColor grayColor]; ovController.view.alpha = 0.5; ovController.rvController = self; [self.tableView insertSubview:ovController.view aboveSubview:self.parentViewController.view]; searching = YES; letUserSelectRow = NO; self.tableView.scrollEnabled = NO; //Add the done button. self.navigationItem.rightBarButtonItem = [[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemDone target:self action:@selector(doneSearching_Clicked:)] autorelease]; } // Override to allow orientations other than the default portrait orientation. - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { // Return YES for supported orientations. return YES; } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Relinquish ownership any cached data, images, etc that aren't in use. } - (void)viewDidUnload { // Relinquish ownership of anything that can be recreated in viewDidLoad or on demand. // For example: self.myOutlet = nil; } - (void)dealloc { [dataForCurrentLevel release]; [tableViewData release]; [super dealloc]; } #pragma mark - #pragma mark Table view methods // DATA SOURCE METHOD - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { return 1; } // DATA SOURCE METHOD - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { // How many rows should be displayed? return [tableViewData count]; } // DELEGATE METHOD - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { // Cell reuse block static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier] autorelease]; } // Configure the cell's contents - we want the program code, and a disclosure indicator cell.textLabel.text = [tableViewData objectAtIndex:indexPath.row]; cell.accessoryType = UITableViewCellAccessoryDisclosureIndicator; return cell; } //RootViewController.m - (void)searchBar:(UISearchBar *)theSearchBar textDidChange:(NSString *)searchText { //Remove all objects first. [copyListOfItems removeAllObjects]; if([searchText length] &gt; 0) { [ovController.view removeFromSuperview]; searching = YES; letUserSelectRow = YES; self.tableView.scrollEnabled = YES; [self searchTableView]; } else { [self.tableView insertSubview:ovController.view aboveSubview:self.parentViewController.view]; searching = NO; letUserSelectRow = NO; self.tableView.scrollEnabled = NO; } [self.tableView reloadData]; } //RootViewController.m - (void) doneSearching_Clicked:(id)sender { searchBar.text = @""; [searchBar resignFirstResponder]; letUserSelectRow = YES; searching = NO; self.navigationItem.rightBarButtonItem = nil; self.tableView.scrollEnabled = YES; [ovController.view removeFromSuperview]; [ovController release]; ovController = nil; [self.tableView reloadData]; } // DELEGATE METHOD - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { // In any navigation-based application, you follow the same pattern: // 1. Create an instance of the next-level view controller // 2. Configure that instance, with settings and data if necessary // 3. Push it on to the navigation stack // In this situation, the next level view controller is another table view // Therefore, we really don't need a nib file (do you see a CourseCodes.xib? no, there isn't one) // So, a UITableViewController offers an initializer that programmatically creates a view // 1. Create the next level view controller // ======================================== CourseCodes *nextVC = [[CourseCodes alloc] initWithStyle:UITableViewStylePlain]; // 2. Configure it... // ================== // It needs data from the dictionary - the "value" for the current "key" (that was tapped) NSDictionary *nextLevelDictionary = [dataForCurrentLevel objectForKey:[tableViewData objectAtIndex:indexPath.row]]; nextVC.dataForCurrentLevel = nextLevelDictionary; // Set the view title nextVC.title = [tableViewData objectAtIndex:indexPath.row]; // 3. Push it on to the navigation stack // ===================================== [self.navigationController pushViewController:nextVC animated:YES]; // Memory manage it [nextVC release]; } /* // Override to support conditional editing of the table view. - (BOOL)tableView:(UITableView *)tableView canEditRowAtIndexPath:(NSIndexPath *)indexPath { // Return NO if you do not want the specified item to be editable. return YES; } */ /* // Override to support editing the table view. - (void)tableView:(UITableView *)tableView commitEditingStyle:(UITableViewCellEditingStyle)editingStyle forRowAtIndexPath:(NSIndexPath *)indexPath { if (editingStyle == UITableViewCellEditingStyleDelete) { // Delete the row from the data source. [tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationFade]; } else if (editingStyle == UITableViewCellEditingStyleInsert) { // Create a new instance of the appropriate class, insert it into the array, and add a new row to the table view. } } */ /* // Override to support rearranging the table view. - (void)tableView:(UITableView *)tableView moveRowAtIndexPath:(NSIndexPath *)fromIndexPath toIndexPath:(NSIndexPath *)toIndexPath { } */ /* // Override to support conditional rearranging of the table view. - (BOOL)tableView:(UITableView *)tableView canMoveRowAtIndexPath:(NSIndexPath *)indexPath { // Return NO if you do not want the item to be re-orderable. return YES; } */ @end

    Read the article

  • Lost with hibernate - OneToMany resulting in the one being pulled back many times..

    - by Andy
    I have this DB design: CREATE TABLE report ( ID MEDIUMINT PRIMARY KEY NOT NULL AUTO_INCREMENT, user MEDIUMINT NOT NULL, created TIMESTAMP NOT NULL, state INT NOT NULL, FOREIGN KEY (user) REFERENCES user(ID) ON UPDATE CASCADE ON DELETE CASCADE ); CREATE TABLE reportProperties ( ID MEDIUMINT NOT NULL, k VARCHAR(128) NOT NULL, v TEXT NOT NULL, PRIMARY KEY( ID, k ), FOREIGN KEY (ID) REFERENCES report(ID) ON UPDATE CASCADE ON DELETE CASCADE ); and this Hibernate Markup: @Table(name="report") @Entity(name="ReportEntity") public class ReportEntity extends Report{ @Id @GeneratedValue(strategy = GenerationType.AUTO) @Column(name="ID") private Integer ID; @Column(name="user") private Integer user; @Column(name="created") private Timestamp created; @Column(name="state") private Integer state = ReportState.RUNNING.getLevel(); @OneToMany(mappedBy="pk.ID", fetch=FetchType.EAGER) @JoinColumns( @JoinColumn(name="ID", referencedColumnName="ID") ) @MapKey(name="pk.key") private Map<String, ReportPropertyEntity> reportProperties = new HashMap<String, ReportPropertyEntity>(); } and @Table(name="reportProperties") @Entity(name="ReportPropertyEntity") public class ReportPropertyEntity extends ReportProperty{ @Embeddable public static class ReportPropertyEntityPk implements Serializable{ /** * long#serialVersionUID */ private static final long serialVersionUID = 2545373078182672152L; @Column(name="ID") protected int ID; @Column(name="k") protected String key; } @EmbeddedId protected ReportPropertyEntityPk pk = new ReportPropertyEntityPk(); @Column(name="v") protected String value; } And i have inserted on Report and 4 Properties for that report. Now when i execute this: this.findByCriteria( Order.asc("created"), Restrictions.eq("user", user.getObject(UserField.ID)) ) ); I get back the report 4 times, instead of just the once with a Map with the 4 properties in. I'm not great at Hibernate to be honest, prefer straight SQL but I must learn, but i can't see what it is that is wrong.....? Any suggestions?

    Read the article

  • Why doesn't Perl's Try::Tiny's try/catch give me the same results as eval?

    - by sid_com
    Why doesn't the subroutine with try/catch give me the same results as the eval-version does? #!/usr/bin/env perl use warnings; use strict; use 5.012; use Try::Tiny; sub shell_command_1 { my $command = shift; my $timeout_alarm = shift; my @array; eval { local $SIG{ALRM} = sub { die "timeout '$command'\n" }; alarm $timeout_alarm; @array = qx( $command ); alarm 0; }; die $@ if $@ && $@ ne "timeout '$command'\n"; warn $@ if $@ && $@ eq "timeout '$command'\n"; return @array; } shell_command_1( 'sleep 4', 3 ); say "Test_1"; sub shell_command_2 { my $command = shift; my $timeout_alarm = shift; my @array; try { local $SIG{ALRM} = sub { die "timeout '$command'\n" }; alarm $timeout_alarm; @array = qx( $command ); alarm 0; } catch { die $_ if $_ ne "timeout '$command'\n"; warn $_ if $_ eq "timeout '$command'\n"; } return @array; } shell_command_2( 'sleep 4', 3 ); say "Test_2"

    Read the article

  • How do I use a variable within an extended class public variable

    - by Gerry Humphrey
    Have a class that I am using, I am overriding variables in the class to change them to what values I need, but I also not sure if or how to handle an issue. I need to add a key that is generated to each of this URLs before the class calls them. I cannot modify the class file itself. use Theme/Ride class ETicket extends Ride { public $key='US20120303'; // Not in original class public $accessURL1 = 'http://domain.com/keycheck.php?key='.$key; public $accessURL2 = 'http://domain.com/keycheck.php?key='.$key; } I understand that you cannot use a variable in the setting of the public class variables. Just not sure what would be the way to actually do something like this in the proper format. My OOP skills are weak. I admit it. So if someone has a suggestion on where I could read up on it and get a clue, it would be appreciated as well. I guess I need OOP for Dummies. =/

    Read the article

  • ProtoInclude for fields ?

    - by Big
    I have a simple object [ProtoContract] public class DataChangedEventArgs<T> : EventArgs { private readonly object key; private readonly T data; private readonly DataChangeType changeType; ///<summary> /// Key to identify the data item ///</summary> public object Key { get { return key; } } [ProtoMember(2, IsRequired = true)] public T Data { get { return data; } } [ProtoMember(3, IsRequired = true)] public DataChangeType ChangeType { get { return changeType; } } and I have a problem with the key. Its type is object, but it can be either int, long or string. I would intuitively use a ProtoInclude attribute to say "expect these types" but unfortunately they are class only attribute. Does anybody has any idea how I could work around this ? For background, the public object Key is here for historical reasons (and all over the place) so I would very much like to avoid the mother of all refactorings ;-) Any chance I could get this to Serialize, even force it to Serialize as a string ?

    Read the article

  • Why MSMQ won't send a space character?

    - by cyclotis04
    I'm exploring MSMQ services, and I wrote a simple console client-server application that sends each of the client's keystrokes to the server. Whenever hit a control character (DEL, ESC, INS, etc) the server understandably throws an error. However, whenever I type a space character, the server receives the packet but doesn't throw an error and doesn't display the space. Server: namespace QIM { class Program { const string QUEUE = @".\Private$\qim"; static MessageQueue _mq; static readonly object _mqLock = new object(); static XmlSerializer xs; static void Main(string[] args) { lock (_mqLock) { if (!MessageQueue.Exists(QUEUE)) _mq = MessageQueue.Create(QUEUE); else _mq = new MessageQueue(QUEUE); } xs = new XmlSerializer(typeof(string)); _mq.BeginReceive(new TimeSpan(0, 1, 0), new object(), OnReceive); while (Console.ReadKey().Key != ConsoleKey.Escape) { } } static void OnReceive(IAsyncResult result) { Message msg; lock (_mqLock) { try { msg = _mq.EndReceive(result); Console.Write("."); Console.Write(xs.Deserialize(msg.BodyStream)); } catch (Exception ex) { Console.Write(ex); } } _mq.BeginReceive(new TimeSpan(0, 1, 0), new object(), OnReceive); } } } Client: namespace QIM_Client { class Program { const string QUEUE = @".\Private$\qim"; static MessageQueue _mq; static void Main(string[] args) { if (!MessageQueue.Exists(QUEUE)) _mq = MessageQueue.Create(QUEUE); else _mq = new MessageQueue(QUEUE); ConsoleKeyInfo key = new ConsoleKeyInfo(); while (key.Key != ConsoleKey.Escape) { key = Console.ReadKey(); _mq.Send(key.KeyChar.ToString()); } } } } Client Input: Testing, Testing... Server Output: .T.e.s.t.i.n.g.,..T.e.s.t.i.n.g...... You'll notice that the space character sends a message, but the character isn't displayed.

    Read the article

  • Have I found a security problem in an API or do I just not understand SSL?

    - by jamieb
    I'm working on building a set of Python bindings around an XML-based API provided by a vendor. The vendor requires that all transactions be conducted over SSL. Using a Linux box, I created a key file and a CSR for my application. Using their self-service web portal, I then generate a certificate using that CSR. Both the key file and the certificate are used when making the SSL request to the API. I'm now working on designing exception classes to make error messages more verbose (and, hopefully, more useful to developers using my bindings). Part of my testing has included altering the key file: transpose a couple characters here, replace 4 or 5 with random characters there, etc. To my surprise, altering the key file had no effect! As long as I didn't change the total length of it, the API didn't complain about a bad key file. The only way I was able to throw an error was by swapping in a completely different key from another application. At that point, the API complained about the Common Name not matching. Is this normal behavior or has the vendor not properly implemented SSL?

    Read the article

  • memcache is not storing data accross requests

    - by morpheous
    I am new to using memcache, so I may be doing something wrong. I have written a wrapper class around memcache. The wrapper class has only static methods, so is a quasi singleton. The class looks something like this: class myCache { private static $memcache = null; private static $initialized = false; public static function init() { if (self::$initialized) return; self::$memcache = new Memcache(); if (self::configure()) //connects to daemon { self::store('foo', 'bar'); } else throw ConnectionError('I barfed'); } public static function store($key, $data, $flag=MEMCACHE_COMPRESSED, $timeout=86400) { if (self::$memcache->get($key)!== false) return self::$memcache->replace($key, $data, $flag, $timeout); return self::$memcache->set($key, $data, $flag, $timeout); } public static function fetch($key) { return self::$memcache->get($key); } } //in my index.php file, I use the class like this require_once('myCache.php'); myCache::init(); echo 'Stored value is: '. myCache::fetch('foo'); The problem is that the myCache::init() method is being executed in full everytime a page is requested. I then remembered that static variables do not maintain state accross page requests. So I decided instead, to store the flag that indicates whether the server contains the start up data (for our purposes, the variable 'foo', with value 'bar') in memcache itself. Once the status flag is stored in memcache itself, It solves the problem of the initialisation data being loaded for every page request (which quite frankly, defeats the purpose of memcache). However, having solved that problem, when I come to fetch the data in memcache, it is empty. I dont understand whats going on. Can anyone clarify how I can store my data once and retrieve it accross page requests? BTW, (just to clarify), the get/set is working correctly, and if I allow memcache to load the initialisation data for each page request, (which is silly), then the data is available in memcache.

    Read the article

  • How should I launch a Portable Python Tkinter application on Windows without ugliness?

    - by Andrew
    I've written a simple GUI program in python using Tkinter. Let's call this program 'gui.py'. My users run 'gui.py' on Windows machines from a USB key using Portable Python; installing anything on the host machine is undesirable. I'd like my users to run 'gui.py' by double-clicking an icon at the root of the USB key. My users don't care what python is, and they don't want to use a command prompt if they don't have to. I don't want them to have to care what drive letter the USB key is assigned. I'd like this to work on XP, Vista, and 7. My first ugly solution was to create a shortcut in the root directory of the USB key, and set the "Target" property of the shortcut to something like "(root)\App\pythonw.exe (root)\App\gui.py", but I couldn't figure out how to do a relative path in a windows shortcut, and using an absolute path like "E:" seems fragile. My next solution was to create a .bat script in the root directory of the USB key, something like this: @echo off set basepath=%~dp0 "%basepath%App\pythonw.exe" "%basepath%\App\gui.py" This doesn't seem to care what drive letter the USB key is assigned, but it does leave a DOS window open while my program runs. Functional, but ugly. Next I tried a .bat script like this: @echo off set basepath=%~dp0 start "" "%basepath%App\pythonw.exe" "%basepath%\App\gui.py" (See here for an explanation of the funny quoting) Now, the DOS window briefly flashes on screen before my GUI opens. Less ugly! Still ugly. How do real men deal with this problem? What's the least ugly way to start a python Tkinter GUI on a Windows machine from a USB stick?

    Read the article

  • French date format

    - by kwek-kwek
    I am a newbie in PHP & wordpress. I wanted to know how to make this codde renders the date formating in french (e.g. 5 Fev) when your on the french side but in english format in English (e.g. Jan 5) Here is my code: <?php if (strtolower(ICL_LANGUAGE_CODE) == 'en') {$sidePosts = get_posts('cat=3,4,5,19&posts_per_page=5&order=DESC&orderby=date');} if (strtolower(ICL_LANGUAGE_CODE) == 'fr') {$sidePosts = get_posts('cat=9,10,11,17&posts_per_page=5&order=DESC&orderby=date');} foreach($sidePosts as $sidePosts) { $array = (array) $sidePosts; print("<li>"); print("<span class='date'>".get_the_time('M j', $array[ID])."</span>"); print("<a href='".get_permalink($array[ID])."' title='".$array[post_title]."'>".$array[post_title]."</a>"); print("</li>"); } ?>

    Read the article

  • Can I specify default value?

    - by atch
    Why is it that for user defined types when creating an array of objects every element of this array is initialized with default ctor but when I create built-in type this isn't the case? And second question: is it possible to specify default value to be used while initialize? Something like this (not valid): char* p = new char[size]('\0'); And another question in this topic while I'm with arrays. I suppose that when creating an array of user defined type and knowing the fact that every elem. of this array will be initialized with default value firstly why? If arrays for built in types do not initialize their elems. with their dflts why do they do it for UDT, and secondly: is there a way to switch it off/avoid/circumvent somehow? It seems like bit of a waste if I for example have created an array with size 10000 and then 10000 times dflt ctor will be invoked and I will (later on) overwrite this values anyway. I think that behaviour should be consistent, so either every type of array should be initialized or none. And I think that the behaviour for built-in arrays is more appropriate.

    Read the article

  • Evaluating Javascript Arrays

    - by FailBoy
    I have an array that contains an array of arrays if that makes any sense. so for example: [[1, 2, 3], [2, 3, 4], [3, 4, 5], [4, 5, 6]] I want to see whether an array exists withing the array, so if [1, 2, 3] is duplicated at all. I have tried to use the .indexOf method but it does find the duplicate. I have also tried Extjs to loop through the array manually and to evaluate each inner array, this is how I did it: var arrayToSearch = [[1, 2, 3], [2, 3, 4], [3, 4, 5], [4, 5, 6]]; var newArray = [1, 2, 3]; Ext.each(arrayToSearch, function(entry, index){ console.log(newArray, entry); if(newArray == entry){ console.log(index); }; }); This also does not detect the duplicate. the console.log will output [1, 2, 3] and [1, 2, 3] but will not recognize them as equal. I have also tried the === evaluator but obviously since == doesn't work the === wont work. I am at wits end, any suggestions.

    Read the article

< Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >