Search Results

Search found 12497 results on 500 pages for 'linked servers'.

Page 340/500 | < Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >

• Minimal Lync 2013 Setup

  - by vkapadia

  I would like to install a Lync 2013 server at home. What would be the minimum requirements for it? I've seen the requirements and they seem pretty hefty, just want to know what I need for a basic set up. This will be for up to 5 users. I would like users to be able to connect from outside the network as well. From what I've been able to find, it looks like I'll need 3 servers. A domain controller, a lync front end server, and an edge server (for external connectivity, and it will need 2 network cards). Is that really all necessary? And how would they need to be connected (I've never connected a machine with multiple network cards)? Do they all have to be separate machines, or can I use VMs?

  Read the article

• Change Exchange Server Name Before Upgrade

  - by ffrugone

  I need to upgrade the Exchange Server from 2003 to 2010. I'm physically changing servers as well as software. I'm worried about redirecting the Outlook clients after the upgrade is going to be troublesome. So, I thought that before doing anything else, that I would change the name of the Exchange server on the client from 'server-name.domain.com' to 'mail.domain.com' and add an entry in dns that points 'mail.domain.com' to the same ip as 'server-name.domain.com'. However, even though I added 'mail.domain.com' to the dns, I cannot get the Exchange server to change to that on the client computers. I found out that the Outlook clients check the Global Catalog for the name of the Exchange server computer. My question is: can I change the Global Catalog address of the Exchange computer from 'server-name.domain.com' to 'mail.domain.com'? If so/not, is there a better way to do this? thanks.

  Read the article

• internet without dns tennis play [closed]

  - by Curious

  Why do we make DNS requests separately when an ISP could also be handling the DNS request along with HTTP data simultaneously. So rather than: Ask opendns what yahoos address is. Opendns returns: 66.55.44.11 Hey, Verizon. Send/Request data from 66.55.44.11. Why wouldn't the protocol just request data from "yahoo.com" and verizon interprets the yahoo.com as a split DNS request. This would lower latency for sure as it cuts out the time required for the dns server to call back the IP to then be sent AGAIN when it could just be handling the entire request theoretically. Couldn't this be managed via a host file change on the client side and make compatible servers?? So much like a proxy.

  Read the article

• Why would one server be sending DUP ACK packets to one PC, which is responding with HTTP RST packets?

  - by IronicMuffin

  I'm not a network profressional, so please excuse any wrong language. I was debugging why my DNS traffic was a constant 160Kbps on our corporate network. I opened up a wireshark trace, and I see one PC of a coworker broadcasting HTTP [RST] packets to one of our DMZ servers at the rate of 1000 a second. He restarted his machine, and as soon as it went offline, the server started broadcasting [DUP] [ACK] packets, until he came back online. It then resumed the HTTP [RST] packets. Apparently this server has been doing this kind of behavior since it went live. I believe it did this with a printer and an access point as well. Can anyone explain why this behavior is occurring? Any solutions? The initial research was done because there have been "bandwidth issues" and I wonder if this is contributing.

  Read the article

• How to NFSv4 share a ZFS file system on FreeBSD?

  - by Sandra

  Using FreeBSD 9, and created a ZFS file system like so zfs create tank/project1 zfs set sharenfs=on tank/project1 There are many howto's on setting up NFSv3 on FreeBSD on the net, but I can't find any one NFSv4 and when the NFS share is done with ZFS. E.g. this howto say I have to restart the (NFSv3) by nfsd -u -t -n 4, but I don't even have nfsd. When I do # echo /usr/ports/*/*nfs* /usr/ports/net-mgmt/nfsen /usr/ports/net/nfsshell /usr/ports/net/pcnfsd /usr/ports/net/unfs3 /usr/ports/sysutils/fusefs-chironfs /usr/ports/sysutils/fusefs-funionfs /usr/ports/sysutils/fusefs-unionfs # I don't see any NFSv4 servers, which I could install with pkg_add. Question How do I install and setup NFSv4, so I can mount the share from e.g. a Linux host?

  Read the article

• Why can't I access a webserver through a load balancer on my local network?

  - by Karptonite

  When I try to use curl (or wget, lynx, etc) to connect from a server on our local network to our website, which is on a local server behind a CoyotePoint load balancer, curl fails. Ping does not have this problem. When I curl directly to any of the servers behind that load balancer (from and to the same local network), I also have no problem. It doesn't matter whether the local server I'm curling from is behind the load balancer or not. Does anyone have any idea why I can't access my webserver through the load balancer on my local network?

  Read the article

• rsync generates very much traffic

  - by user109459

  I use rsync for backing up one of my servers with 4GB of files. When I now try to transfer these files the traffic for the files isn't the estimated 4GB. It is a lot higher. It's about 60GB. I also checked the traffic on my server, backup server and router and all three say that there was a traffic of 60GB. But at the end rsync says that it only has transfered 4GB. Another problem is that I can't debugg it because the problem occures randomly.

  Read the article

• Vmware peaks NFS load every 30 seconds

  - by gtirloni

  We were troubleshooting a performance problem on one of our storage servers and after investigating almost everything in sight we saw that every 30 seconds, Vmware would go from 10k IOPS (NFS) to 30k, 50k, 100k or whatever the server would handle. Most of it were reads. What could cause this raise in NFS operations per second every 30 seconds? The virtual machines are managed by external customers and there isn't much in common between them. While breaking utilization down by filename, we discovered 5-10 virtual machines that contributed more to those peaks but it still doesn't explain why every 30 seconds. There are no other peaks outside that 30 sec period (ie. it stays in an almost constant average). Is there an NFS tweak in Vmware to change that 30 second period? If that's really necessary, we would like to introduce some variation so all that workload isn't dropped all at once. It's causing NFS timeout on the ESX 3.5/4.0 hosts when the storage gets overloaded.

  Read the article

• SSH not working after installing SVN server on Debian

  - by sLIDe

  Today I had to install SVN server on my Debian server. I used this tutorial (only I didn't do anything to connect to SVN through file://, http:// or https://, only svn:// and svn+ssh://). After I installed SVN server and configured it after that tutorial, I tried to connect to it. I could connect to it using svn:// protocol, but when I tried to connect using svn+ssh:// protocol, my servers SSH stopped responding. Even after I stopped SVN server and restarted SSH server I can't connect to it.

  Read the article

• Opinion choosing Switch

  - by mastercode

  ) i have to reestruct a LAN network, with (currently) +/- 60hosts connected ... i have File Servers hosted, VoIP Phones,wireless AP's,printers, scanners, plotters,biometric dispositive,and 2 QNAP TS412 as FileServer and BackupServer, a Mac Mini as main Server of almost all services that need server ... and, a HP V1910-24 (L2+) and another two switches,but, only L2. which switch in your opinion, could fit better this reestruct, to ensure a VLAN division- and have to support Inter VLAN routing also - provide better performance, and also, allow a Future expansion. the budget, is low xD hehe!!

  Read the article

• "this network location can't be included because it is not indexed" on Windows 2008R2 Remote Desktop Services Hosting

  - by ChrisNZ

  I'm setting up a new terminal server for our users on Win2008R2 (I guess I should call it Remote Desktop Services now!) When I try to change the location of "Documents" (by removing the default Documents library and adding a new one), to use the file server ie \\fileserver\username\Documents I get the message: "This network location can't be included because it is not indexed" I certainly don't want to make folders available offline, and in fact, I have set the GPO to prohibit offline folders on the terminal servers. What is the best practice for document libraries on terminal server and network file shares?

  Read the article

• Speedup of fixing an openssl bug with 8192 bit key [on hold]

  - by rubo77

  This is related to this Bug-Report https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=747453 OpenSSL contains a set of arbitrary limitations on the size of accepted key parameters that make unrelated software fail to establish secure connections. The problem was found while debugging a XMPP s2s connection issue where two servers with long certificate keys (8192 Bit RSA) failed to establish a secure connection because OpenSSL rejected the handshake. This seems to be a small problem to be fixed but although there is an easy patch available to fix the issue in that bug report, no reactions are noticed so far.. The last patch that broke the 2048 barrier took 2 years to be implemented and only resulted in an increase to 4096bit, which seems to be a bad joke. Where would we have to report this to speed up the implementation for such an issue?

  Read the article

• Best cloud based IT Systems management services out there?

  - by Ryk

  Our startup organisation is growing fast in 2 different office locations. That brings new challenges and headaches. Our entire company is cloud based, and I am looking for a good product to manage our remote systems. Currently we do not have on-site AD servers, we are using the Windows Azure AD services, so cannot rely on group policies at this stage. I would like to be able to achieve the following: (they are all laptops) Remote Desktop Support Patch management Lock down software on machines (restrict them) Monitor and manage systems Other benefits would be good, but if I can achieve the ones listed above, it will go a long way. We have a combination of Windows 7 pro & Windows 8 & 8.1 machines. I am currently using Windows Intune, but it is really limited. Really just a glorified patch enforcer. Thank you in advance to your help.

  Read the article

• Is it possible as an Administrator to gain access to a SQL Server 2008 instance without changing any passwords?

  - by adhocgeek

  I have administrative access on our network, but I don't manage the installation of all servers or software. On some of our machines instances of SQL Server 2008 have been installed which I need to be able to access, but since my account hasn't been explicitly granted a login, I can't get into. Is there a way to get into the database without changing anyone's password (e.g. I could solve this by changing the password of the user who installed the instance, assuming they've set themselves up as admin, and then logging on as them, but I don't want to have to do this).

  Read the article

• FTP Server with MySQL access, and POST notification

  - by TIW

  Im looking for an FTP server solution, that we can host either internally on a dedicated server, or on Rackspace Cloud/AWS, that provides a HTTP POST notification when a file is uploaded, and allows user accounts to be created either through an API or MySQL database. There are several offerings that provide email notification - but has anyone come across anything that matches the above requirements. BrickFTP being a IaaS system is an option, but we would prefer something hosted in house. I don't believe the standard FTP servers provided with Apache can do the above ... can they?

  Read the article

• Has anyone seen an HTTP 500 error when HTTPS traffic going through Pound Proxy forwards to an HTTP page?

  - by scientastic

  We have Varnish as our load balancer and reverse proxy cache for normal HTTP traffic. For HTTPS traffic, we use Pound proxy to unwrap the SSL and forward to Varnish, which then forwards to the back-end servers. This is used for our "checkout" process to encrypt credit card info in transition. However, on the last stage of checkout, users are always getting an HTTP 500 (Internal Server) error. It doesn't seem to be due to our back-end app server, by all tests I've tried. Does anyone know anything about how that transition works-- the transition back from HTTPS to HTTP and the interaction between Pound and Varnish-- and why it might cause 500 errors?

  Read the article

• Checking that tasks are executed

  - by homer5439

  I'm not sure how to explain this. Once one starts having dozens or hundres of servers, each running some sort of periodic jobs (mostly from cron), there is a problem of making sure (or as sure as possible) that these tasks are actually ran. I mean, I get an email if a job fails fails, and no mail if it succeeds, but also no mail if it doesn't run for whatever reason. Sure, I could change them and have them send a "successfully ran" email, only to be flooded by mails that most of the time I don't want to see. Basically, I want to be notified only if: a task ran and failed a task didn't run at the expected time. Is there a way to do this?

  Read the article

• JBoss basic access

  - by user101024

  I have JBoss 5 deployed on Solaris 10 - the servers connection has unrestricted high ports (1023) open to the internet. I can access the box via ssh & FTP from a second server on the same subnet and anywhere over the internet. JBoss is running over port 8080 and is accessible via http://locahost:8080 on the box itself. I cannot access it via http://ip.add.goes.here:8080 from either the other server on the same subnet or via the internet. Is there any service or configuration within JBoss or elsewhere on Solaris 10 that needs to be changed from default to allow http traffic to be served? Thanks, Kevin

  Read the article

• Where are iSCSI and volume information location on ESX 4.0?

  - by sec_goat

  Let me start by saying I am somewhat of a Vmware novice, I know just enought to manage and create servers at a basic level from the vSphere client. I have a VMWare server, ESX 4.0 connected over iSCSI to a SAN. The SAN is being used as storage for both RDMs and VMFS volumes. The SAN has died and I ordered a new one. Where can I see the settings related to the iSCSI and volume configuration so that I can try and replicate them on the new SAN when it arrives?

  Read the article

• Nightly backups (and maybe other tasks) causing server alerts

  - by J. Pablo Fernández

  I have two independent alert notification systems for my servers. The server is a virtual machine on Linode and one of the alerts comes from Linode. The other monitoring system we use is New Relic. They are both watching out for IO utilization. Every night I get alerts from both of them as the server is using too much IO. I run quite a few tasks in the middle of the night but the one I confirmed that can cause IO-warnings is running the backups. The backup is done by s3cmd sync. I tried ionice but it still generates the warnings. Getting warnings every night reduces the efficacy of warnings when they happen for real. For Linode I could raise the level at which a warning is issued, but it might mean making the whole thing useless as the level is too high. What would be the proper solution for this?

  Read the article

• What factors can affect performance of Http Server written in C-Sharp? [on hold]

  - by Yousaf

  I am having trouble in terms of handling huge databases. I have multiple clients like 100-300 (clients are basically servers with i.e windows sql). Each client may have 38 thousand rows/listing of data, each row has 10-12 fields. I cannot afford to have json files of each client and than handle them on main server, because of memory issue. What if i have http server written in c or c# installed on clients and they return 250 rows in each response to the main server. How the factors like speed, memory or other issues can effect us ? What exactly I am asking for ? In short words if a server writter in c-sharp sends 250 rows per request. What factors can effect the performance of server ? for example. Speed, processing, Operating system, Implementation of algorithm of server ? How these factors can really effect the performance on large scale?

  Read the article

• Some Domain Clients unable to access certain websites

  - by Shaunie

  I have a small domain around 20 clients with a 2003 R2 SP2 DC. Most of my clients can browse the internet freely and dont have a problem. However a couple are reporting problems accessing certain sites. IE: Hotmail, skyscanner, bbc news They can browse the sites sometimes then other times they get 408\409 errors. other machines in the domain can access these sites. I have cleared out dns cache on these machines modified external dns servers on the DC still to no avail. The main issue is the person not able to access skyscanner uses it several times a day to book flights for employess going on leave or returning to work. both clients are running XP SP3 though one machine is getting change for one running win7 shortly. Any advice greatly appreciated. thanks

  Read the article

• PPTP VPN Server issue : server = centOS & client = windows 7

  - by jmassic

  I have a CentOS server configured as a PPTP VPN Server. The client is a Windows 7 with "Use default gateway on remote network" in advanced TCP/IPv4 properties enable. He can connect to CentOS without any problem and can access to: The Box of his ISP (http://192.168.1.254/) The CentOS server The website which is hosted by the server (through http://) But he canNOT access any other web service (google.com or 74.125.230.224) I am a beginner with web servers so I do not know what can cause this problem. Note 0 : The Windows 7 user must be able to access the whole internet through the CentOS PPTP proxy. Note 1 : With "Use default gateway on remote network" in advanced TCP/IPv4 UNCHECKED it is the same problem Note 2 : With "Use default gateway on remote network" in advanced TCP/IPv4 UNCHECKED AND "disable class based route addition" CHECKED the Win 7 can access google but with the ISP IP (no use of the VPN...) See Screenshot Note 3 : I have made a echo 1 > /proc/sys/net/ipv4/ip_forward and a iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

  Read the article

• Use server git installation in GitHub for Windows

  - by Lg102

  We are using Git as the version control for our website development. I work from a laptop, which is connected to the internal network via a WiFi connection. I've mapped the server drives as network drives in Windows. Commands such as git status take significantly longer for me than they do for my co-workers on wired connections. When connecting to the server using SSH and running commands on the git installation there, performance is even better. Is there a way to configure GitHub for Windows to use the server-installed git (with my credentials)? Note: While our production servers has a user configuration with proper permissions, the development server has only one root user.

  Read the article

• Application running as a service is not able to create the same number of processes as when it runs

  - by Pini Reznik

  I have a Windows application which creates up to 35 processes and it's working OK when it's running from cmd. But when it is executed as a service on the same machine it is able to create only 20 processes and all other are killed because of some kind of resource exhaustion problem. The problem is persistent on one Windows 2003 server but not reproducible on other servers. Can it be because the system has run out of desktop heap? http://support.microsoft.com/kb/184802 How can I check it?

  Read the article

< Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >