Search Results

Search found 10939 results on 438 pages for 'third monitor'.

Page 342/438 | < Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >

• Why are ISP's installing routers on my site when the feed is a form of ethernet already?

  - by Cosmin Prund

  I'm connected to 3 ISP's right now. Two of them already have routers at my site, the third one announced me "they need to install some equipment" when I requested BGP session. I can only assume they need to install a Router, since that connection is now working fine, using the usual /30 net block for the connection, and the "last-mile" solution is not going to change since they only installed it last week and the BGP was in the contract from the beginning. I simply don't understand this: the "feed" is already a form of ethernet. Even those they're using different technologies for the last mile, they're all entering the ISP router using an RJ45 WAN port. I assume the ISP router does something really important that can't be done by the Big Router on the other end of the connection. It must also be something that can hurt them if miss-configured, since they don't trust us (the client) to do the stuff on our router. And I'm not talking cheap throw-away routers here: One of the routers is Cisco 2800. Edit to add network details: I'm connected to 3 ISP's, two over Radio links, one over Fiber Optic. One of the radio links is going to get dropped and the other radio link will be turned into fiber sometime next year. The fiber is 20 Mbit, radio 1 is 40 Mbit and radio 2 is 2 Mbit. I've got a /24 of provider independent address space. I'm not doing out-of-the ordinary stuff with my network, I'm overly connected because my network needs to be "up" all the time.

  Read the article

• Windows media scaling/interpolation method

  - by MichaelH

  Usually in Windows, if videos or other media is upscaled from a certain resolution to a higher resolution (e.g. "monitor size"), a bilinear filtering algorithm or similar is used, such that the upscaled material doesn't look blocky. On my system however, the used interpolation algorithm changed from 'bilinear' to 'nearest neighbor' at some point, with the effect that upscaled videos (e.g. viewed in MPC or WMP, and also Skype video streams) and games (e.g. from PopCap) appear rather blocky. Not sure what the common factor between those is, could be DirectShow(?). I am not aware of having changed any setting that could have affected this state, in fact I am not even aware such a setting exists. I'm guesing that some installed software must have changed something on my computer. My computer is running Windows 7, but I had already experienced the same effect on an XP machine some while ago, where it changed back again to the more pleasing bilinear interpolation after a while, as magically as the first time. What could be wrong with this installation, and how can I change this upscaling interpolation behavior?

  Read the article

• batch copy files with error log on missing permissions

  - by sc911

  Hi *, I'm searching for a tool to batch-copy files, that should support the following points: copy files from a net-share report any errors show errors only or filter log on errors don't stop on an error also report if a file or a folder could not be copied due to missing permissions if possible it should have a queue where new job can be added while copying I tried the following tools: TerraCopy: takes a lot time to just calculate the time and the size of the job and does not report errors due to missing permissions (it doesn't even add those files to the copy-queue) Karne's replicator: does not report errors due to missing permissions xcopy: does a great job when using the right parameters and piping the output to a file (in the German localization xcopy /k /r /e /i /s /c /h SOURCE TARGET>LOGFILE 2>&1 will do the job. opening the logfile in IE will give you a great monitor). but quing jobs it not possible (ok, you can join them all in a batch-file, but you can not queue jobs while another one is running (hm, thinking of a batch-script that loops through a file with the source-target-config...)) to be continued Which tools do you use? Tell me! Thx sc911

  Read the article

• Windows 8 Fails to install with corrupted graphics

  - by Andy

  I am trying to install Windows 8 Pro Upgrade via the download method on an older PC (07-08). It is a Dell Dimension E521 but it has been upgraded with a 3.0 Ghz Dual Core AMD Processor, 120 GB SSD, and 4 GB of RAM. The Windows 8 upgrade assistant did not detect any issues or concerns with upgrading other than I don't have DVD software installed. The system install Windows 8 but on the first boot, corrupt graphics are present. Eventually, the monitor will go into sleep mode and then roll back to Windows 7 Pro X64 which runs fine. I wouldn't be upset over not being able to install Windows 8, but I already paid for the software since I thought there would be no issues upgrading. The Graphics card in the system is the Geforce 7300LE and it has the latest NVidia drivers for Windows 7 loaded. I saw this solution which is similar to my problem: Corrupt graphics during Windows 8 installation However, I have downloaded Windows 8 and I am not sure how to go about modifying the install that resides somewhere on the hard drive. Thanks in advance for any assistance.

  Read the article

• How to include worksheet 3 and 4 in a cell formula provided?

  - by user21255

  I have been kindly given this formula with an explanation on how it works: Insert this formula into the cell B4 of the sheet "Cases": =IF(NOT(ISBLANK('1st'!B25)),'1st'!B25,IF(NOT(ISBLANK(INDIRECT("'2nd'!R" & (ROW($B4)-(COUNTA('1st'!$B:$B)-COUNTA('1st'!$B$1:$B$24))-4+25) & "C" & COLUMN(B4),FALSE))),INDIRECT("'2nd'!R" & (ROW($B4)-(COUNTA('1st'!$B:$B)-COUNTA('1st'!$B$1:$B$24))-4+25) & "C" & COLUMN(B4),FALSE),"")) Copy the formula to the other cells in the worksheet; the relative addresses will adjust automatically. The formula works like this: Check if there is content in 1st. If yes, copy it. If no, find out how many entries there are in 1st in total. (This is done by using the COUNTA function on the whole B column in 1st and subtracting the number of non-empty cells above the actual case data.) Use this information together with the current cells's number to find out the location of the cell that has to be copied from 2nd. Create the address of the cell and use the ISBLANK function on the INDIRECT function with that address to check if the cell is empty. If it is not, use the INDIRECT function again to display it. If it is empty, just display an empty string. Now this works fine when I have only 2 sheets. But lets say I want to include a third and fourth sheet (name as 3rd and 4th respectively), then what and should I put the formula for this in the formula above? There are actually 31 sheets but if I know how to add 3rd and 4th sheet in the formula, then I can figure out how to do the rest. Thanks

  Read the article

• How to reproduce the behavior of Mac OS X's dead keys on Windows 7?

  - by Pascal Qyy

  I'm French, but I've chosen to take a QWERTY keyboard for my MacBook Pro for many reasons: first of all, the AZERTY keyboard is not at all ergonomic because it has no numeric keypad, and I must use MAJ or CAPS LOCK to access to the numeric keys ; secondly, I've bought this mac for development ; and chars {, }, etc., are not directly accessible on the Apple AZERTY keyboard the last thing is that: the diacritics are VERY easy to produce on an Apple keyboard with Mac OS X : ? + c for a ç, for example, and many dead keys easy to use (e.g. ? + e, then e give you an é. So, I have no difficulties to write in my native language with this keyboard under Mac OS X. BUT, when I boot on Windows 7's Boot Camp partition, or when I use applications from it through VMware Unity, it is no longer the same comfort! Without numeric keypad, it's impossible to use it for produce specials characters (e.g.: Alt + 0231 for the ç) I've tried many solutions, like auto replacement in Microsoft Office (e.g.: ,,c being replaced by ç), but for all my diacritics, I must type a space, then a back space before the replacement work. I've also tried third party software, as Texter, but it is very buggy and don't work properly (or don't work at all) in many case! So, is there a solution somewhere, to have this Mac OS X's nice and comfortable way of producing diacritics for Windows 7? Thank in advance for your help and your time!

  Read the article

• Finding Bluetooth link key in Windows 7, to double pair a device on dualboot computer

  - by Ilari Kajaste

  How can I dig up the Bluetooth link key for a paired device in Windows 7? Is this something that is dependent on the Bluetooth stack I'm using (Toshiba), or is there a generic place to store these in Windows 7? Note: I'm not talking about the six-digit code usually typed by the user during pairing - that is worthless since it's discarded after pairing process. What I mean is the 128-bit link key that the devices exchange during pairing, and use thereafter to encrypt all their Bluetooth traffic. Background: I dualboot Windows 7 / Ubuntu on my laptop, and I would like to have my phone paired to both OS's. Since the dualbooting computer has only one Bluetooth adapter and thus only one Bluetooth address, I cannot do two pairings to the phone, since on the second pairing (Windows) the phone just replaces the previous pairing (Linux) to the same Bluetooth address. A thread on Ubuntu forums pointed me to what I have to do - pair first on Linux, then on Windows, and then replace the link key on Linux side with the one Windows negotiated. I can find the Linux side pairing key from /var/lib/Bluetooth/[BD_ADDR]/linkkeys - no problems there. However, on Windows side I can't find the key. According to the forum post, on Windows side the key should be in SYSTEM\ControlSet002\services\BTHPORT\Parameters\Keys\[BD_ADDR] but while that registry key does exist, it has no subkeys. (And a similar registry path in ControlSet001 didn't have any subkeys either.) One thing I've been instructed to do is to capture all events during pairing with Sysinternals Process Monitor. I did this, but I haven't been able to find any useful information from the captured events, not even by exporting the data to a huge XML and grepping that with the BD_ADDRs (with or without colons). So how could I find the link key for a paired device in Windows 7? Some reference information: Wikipedia: Bluetooth, Security Now: Bluetooth security

  Read the article

• IIS not responding with SSL Server Hello

  - by Damien_The_Unbeliever

  I'm having difficulty getting a particular IIS machine to "do" SSL. This is a test environment (one of many) which we've set up "the same" as we have many times previously, but it just doesn't seem to be working. The server is Windows Server 2003 (Version 5.2 (Build 3790.srv03_sp2_gdr.100216-1301 : Service Pack 2)) IIS is hosting 4 sites (including the default site), but only one site is configured for SSL. We're using the same SSL certificate we use on all of our other servers (it's a wildcard cert). (Don't think this is relevant, but including anyway) We've configured the site to require SSL, it has a subdirectory that doesn't require SSL but has an asp page that redirects into SSL. The 403;4 error page for the site is hooked up to this asp page (this is how we do our non-HTTPS into HTTPS transition). Using Microsoft Network Monitor (3.3), I've just run a session against a server where SSL is working. It can pull apart the SSL exchange as the following messages: SSL: Client Hello SSL: Server Hello. Certificate. Server Hello Done SSL: Client Key Exchange. Change Cipher Spec. Encrypted Handshake Message. SSL: Change Cipher Spec. Encrypted Handshake Message However, on our problem server, I only see: SSL: Client Hello. The next packet from the server (from port 443, so it's listening and responding there) contains only 60 bytes, and just seems to have the Tcp headers and not much else (but I'm by no means an expert at deciphering these things). So, where do I look next? Or what additional information do I need to add to this question, and where do I find it?

  Read the article

• need some help figuring out clamav & monit monitoring error...unixsocket...

  - by Ronedog

  I need a bit of help figuring something out. First off, I'm not very well versed with FreeBSD servers, etc. but with some direction hopefully I can get this fixed. I'm using FreeBSD and installed Monit so I could monitor some of the processes that run tomcat, apache, mysql, sendmail, clamav. So far, I'm only successful in getting apache & mysql to be monitored. I'm getting this error for clamav in the log file for /var/log/monit.log 'clamavd' failed, cannot open a connection to UNIX[/usr/local/etc/rc.d/clamav-clamd] My config file for clamav in /etc/monitrc is: #################################################################### # CLAMAV Virus Checks #################################################################### check process clamavd with pidfile /var/run/clamav/clamd.pid group virus start program = "/usr/local/etc/rc.d/clamav-clamd start" stop program = "/usr/local/etc/rc.d/clamav-clamd stop" if failed unixsocket /usr/local/etc/rc.d/clamav-clamd then restart if 5 restarts within 5 cycles then timeout Honestly, I really don't know much of what's going on here. My host who helped me get the box set up basically installed clamav, but doesn't offer this kind of detail in supporting me, so I'm left to figure this stuff out on my own as I own the box, but they provide the isp service. Is there anyone who can help me troubleshoot this? Thanks for your help in advance.

  Read the article

• Certificate revocation check fails for non-domain guest in spite of accessible CRL

  - by 0xFE

  When we try to use certificates on computers that are not part of the domain, Windows complains that The revocation function was unable to check revocation because the revocation server was offline. However, if I manually open the certificate and check the CRL Distribution Point property, I see an ldap:/// URL and an http:// URL that points to externally-accessible IIS site that hosts the CRLs. Of course, the non-domain-joined client cannot access the ldap:/// URL, but it can download the CRL from the http:// link (at least in a browser). I enabled CAPI logging and I see the event that corresponds to this failed revocation check. The RevocationInfo section is: RevocationInfo [ freshnessTime] PT11H27M4S RevocationResult The revocation function was unable to check revocation because the revocation server was offline. [ value] 80092013 CertificateRevocationList [ location] UrlCache [ url] http://the correct URL [fileRef] 6E463C2583E17C63EF9EAC4EFBF2AEAFA04794EB.crl [issuerName] the name of the CA Furthermore, I can see the HTTP request to the correct URL and the server's response (HTTP 304 Not Modified) with Microsoft Network Monitor. I ran certutil -verify -urlfetch, and it seems to show the same thing: the computer recognizes both URLs, tries both, and even though the http:// link succeeds, returns the same error. Is there a way to have non-domain-joined clients skip the ldap:/// link and only check the http:// one? Edit: The ldap:/// URL is ldap:///CN=<name of CA>,CN=<name of server that is running the CA>,CN=CDP,CN=Public Key Services,CN=Services,CN=Configuration,DC=<domain name>?certificateRevocationList?base?objectClass=cRLDistributionPoint The non-domain-joined clients may be on the domain network or on an external network. The http:// CDP is accessible from the public internet.

  Read the article

• How to stop Firefox on an SSD from freezing when using the search box or submitting a form?

  - by sblair

  Firefox usually freezes for about a second whenever I search for something from the toolbar search box, when submitting a form, or when clearing the search box history. I suspect it has something to do with the auto-complete feature. Using Windows 7's Resource Monitor, the problem seems to be from the file: C:\Users\<username>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile>\formhistory.sqlite-journal I believe this is a temporary file which caches database writes. The following screenshot shows the very high response times from six different searches, and that the queue length on drive C shoots off the scale: My Firefox profile is on an Intel X25-M G2 SSD. The problem doesn't seem to occur if I create a new profile on a hard disk drive. However, I'd like to know why the problem exists on the SSD in the first place (because it's an annoying problem which contradicts the reason I bought an SSD, and it might happen with other applications too), and how to prevent it. It still occurs if Firefox is started in safe mode, and with the recent beta versions. Updates: VACUUMing the Firefox profile databases does not help with this problem. The SSD Optimizer in the Intel SSD Toolbox does not help either.

  Read the article

• DHCP Relay setup in ubuntu server

  - by jerichorivera

  I have a network appliance (QNO) that works as traffic load balancer and dhcp server. I would like to add a linux server in between the network appliance and the client computers. The linux server will be used to monitor bandwidth usage. My problem is I still want DHCP to be served by the network appliance so that load balancing will still work efficiently. We are afraid that if we setup the linux server as the DHCP server the network appliance will not be able to load balance the traffic if it only sees the linux server as a single client connecting to it. I've been searching all over for a tutorial on how to setup DHCP relay but have not found any. How do I setup DHCP relay on my linux server given there are two NICs attached to it, one connects the linux server to the network appliance and the other connects the linux server to the client computers. EDIT Router (DHCP) ---- [eth0] Linux Server (Relay agent) [eth1] ----- PC (network) Router IP is 192.168.0.100 eth0 is on DHCP eth1 is static 192.168.2.11 (if I need to change this I can) Tried to do dhcrelay -i eth1 192.168.0.100, but the PC was not getting any DHCP lease from the DHCP router. I might be missing something here.

  Read the article

• Encrypted folders and files stay encrypted when copied

  - by user66126

  Hi all, I just tried out Windows 7 feature to encrypt a folder. I found that when I access the encrypted folder from another computer (the parent folder of the encrypted folder is shared) I can see the files there but I could not open it (which is good). But when I copy the file to another folder outside the encrypted folder (regardless it is on the same remote computer or to the computer from where I am accessing the files) then I can open the file without any problem. This might be how it works ... but that's not what I need. My question is: Can I encrypt a folder (and all files inside), access those files (create, edit) seamlessly while I am logged in normally to the computer ... but make the files stays encrypted when they were copied to another directory outside the encrypted folder? Regardless they were copied to the same computer or another computer or uploaded to a remote server. If this is not a feature that Windows natively support, is there third party software that does that? Thank you.

  Read the article

• Two VGA monitors on Lenovo IdeaCentre H520 Desktop

  - by Sebastian-Laurentiu Plesciuc

  I recently bought a Lenovo IdeaCentre H520 computer and two VGA LED monitors. This particular PC has a dedicated NVIDIA Geforce GT630 video card and an integrated Intel HD Graphics 2500 video card. Both cards have VGA out. The Geforce card also has a HDMI out. I have installed Windows 8 and I can't seem to use both cards. I have connected both monitors, one to the VGA out of the Geforce card and one to the VGA out of the integrated card. I looked through the BIOS options for Video and I can only select the dedicated one, the integrate one or the Auto option. This kinda sucks. I was wondering what kind of options I have available. I have a VGA female to DVI A male adaptor, I was wondering if it could work if I can hook it to a DVI A female to HDMI male adaptor and plug one monitor into the VGA out of the Geforce video card and the other through both adapters to the HDMI out. Any chance this could work? I was looking online for a VGA to HDMI live cable but it's kind of expensive.

  Read the article

• Different external ip addresses from different sites

  - by user630286

  My router is ClearOS 6(Centos 6). In my router, I have two external (internet) network connections from two ISP's. The primary connection is eth2 connected to a cable modem and the second one is ppp0 connected to a dsl modem. I have assigned eth2 as the primary connection (with a high metric value). In fact this is done through clearos's multiwan web interface. I have a test in my Nagios to monitor whether the primary connection. This connection is done based on the result of curl ifconfig.me But it seems that ifconfig.me is always giving the ip address of my secondary connection. I tested it through a browser. Yes ifconfig.me gives the secondary internet's(ppp0) ip address. But whatismyipaddress.[com|org] give my primary ip address (eth2). I checked the default route on the router through ip route list 0/0 which also shows the primary connection (eth2) as the default route. The traceroute www.google.com and traceroute ifconfig.me both seems to trace through the primary connection (eth2). As our secondary internet connection has only got a limited download, I don't want to end up having to pay a large sum at the end of the month. Has somebody got an idea why the ifconfig.me shows my secondary address? What is the best way to ensure that my router(and thus the lan) use the right internet connection.

  Read the article

• Why can't I get out of display mirror mode?

  - by Roy Smith

  I've been running Ubuntu (10.04.1 LTS, 64-bit) for a while and just replaced my hardware with a faster machine with an ATI Radeon HD 5700 video card. I've got twin 1920 x 1080 displays. I downloaded the latest driver (ati-driver-installer-10-9-x86.x86_64.run) from the ATI web site and installed that. I've gone through a few rounds of playing with /etc/X11/xorg.conf, and can't get things right. At the moment, it's in display mirroring mode, and I can't figure out how to get it out of mirror mode. If I run Monitor Preferences, there's a "Same image in all monitors" checkbox. If I uncheck that, the little preview window switches to show two monitors. When I click Apply, it asks me to log out and log back in again. When I do that, I'm right back to mirrored mode. What's really weird is that I'm currently running a copy of xorg.conf from a coworker's machine. He's got identical hardware, and his display works fine. So, I'm inclined to think there's something else going on other than the conf file. Any ideas what might be wrong?

  Read the article

• Help, my CentOS servers keep going down , No route to host after a random uptime

  - by user249071

  Hello , I have a couple of Centos linux servers, that have a very simple task, they run nginx + fastcgi for php , and some NFS mounts between them, readonly They have some RPC commands to start some downloading processes with wget, nothing fancy , from a main server, but their behavior is very unstable, they simply go down, we tried to monitor ram , processor usage, even network connections, they don't load up so much, max network connections up to... 250 max, 15% processor usage and memory , well, doesn't even fill up, 2.5GB from 8GB max , I have no ideea why can a linux server go down like that, they aren't even public servers, no domain names installed no public serving, for sites. The only thing that I've discovered was that if i didn't restart the network service every couple of hours or so... the servers were becoming very slow, starting apps very slow, but not repoting a high usage of resources...Maybe Centos doesn't free the timeout connections, or something like that...It's based on Red Hat right? I'm not a linux expert , but I'm sure that there are a few guys out there that can easily have an answer to this , or even have some leads to what i can do ... I haven't installed snort, or other things to view if we have some DOS attacks, still the scheduled script that restarts the network each hour should put the system back online, and it doesn't.... Thank you in advance

  Read the article

• RouterLess, house-wired network using multiple powerline adapters

  - by Cliff Arnell

  related to the 'old days' of one ethernet cable tapped with Ts for each monitor.... my question might be very simple... or not. I have an over-the-air internet provider with a wire dish with a powered transceiver and cat5 cable out of the providers supplied modem. I'm presently connecting the output of the modem into my wireless router which sends the internet signal all over the house. Standard stuff, I believe. My Question. Can I just connect the output of the modem into 1 powerline adapter and tie all my equipment such as computer, printer, laptop, Tivo recorder, etc. into 1-each local powerline adapters located near each devices resulting in a 'house-wired' network and no router? I'm bothered by the idea that my over-the-air provider might be using something in my router to establish and keep my IP connection alive. I did have to configure the router for my IP, a router which, in my proposed scenario, would no longer exist. Thank you for your help.

  Read the article

• ACER ASPIRE V3-571G-9435 Fan not kicking in leading to overclocking

  - by brythespy

  This laptop has always had this problem. The temperatures kick up to the thermal ceiling of 99C for the CPU (i7-3610QM) and 94C for the GPU (GT 640M). Problem is, the FAN doesn't give a damn. It's actually QUIETER when the temperatures are that high, than when it's at 60C or so. I figured it was a problem with the BIOS, so I updated that, no change. So maybe it was a problem with windows? Nope, same result on gaming with Ubuntu. The major problem of this, is that after gaming for ten minutes the CPU throttles itself to 1197MHz(as opposed to 3193), and the GPU goes down to 135MHz( as opposed to 843MHz). The problem is that the fan won't kick in like I know it can, because when the laptop is in POST, like at BIOS setup, the fan is like a vacuum cleaner it's so loud! I don't really care about noise, so I'd love to have the fan like that all the time as long as the temperatures don't fly through the roof... So, things I've tried so far, to avoid possible duplicate answers. Checked for dust: It's been this way since the laptop was new, and I've since then taken it apart. No dust buildup. Background stuff running?: No, problem persists across OS'es, and it happens while gaming anyways Manually underclocking both CPU/GPU: Using windows, I can force the CPU to stay at 1.1GHz, but the temperature STILL easily hits 99C after 5 min of gaming Contacted Acer support?: No help at all. They told me to update and reset the BIOS, which I have done multiple times. There are only about 6 changeable things anyway, none of which should affect the FAN control Third party fan control program?: None detect the fan So, I'm screwed until I can afford to replace this laptop, but I am very satisfied with performance in games... Whenever the CPU/GPU aren't being throttled. Anyone that can offer advice to solve this problem would be greatly appreciated. Hell, if you solved my problem I'd send you some monies through paypal.

  Read the article

• TEMP environment variable occasionally set incorrectly

  - by Roger Lipscombe

  Occasionally, I find my TEMP and TMP environment variables set to C:\Windows\TEMP. They should be set to %USERPROFILE%\AppData\Local\Temp, and are configured correctly in System Properties. This manifests itself as error messages like the following: ---> System.InvalidOperationException: Unable to generate a temporary class (result=1). error CS2001: Source file 'C:\Windows\TEMP\gb_pz65v.0.cs' could not be found error CS2008: No inputs specified ...which occurs in various .NET applications (in particular Visual Studio 2010 or SQL Server Management Studio). Alternatively, SQL Server Management Studio will report: Value cannot be null. Parameter name: viewInfo (Microsoft.SqlServer.Management.SqlStudio.Explorer) If I run PowerShell elevated, then $env:TEMP is set correctly. If I run PowerShell non-elevated, then it's not. I believe that it should be set correctly in both cases. If not, it's the wrong way round. The same is true for CMD.EXE. Rebooting fixes it, temporarily, until something breaks it again. Presumably something loaded into Explorer.exe is messing with its environment variables, but what? The values in the registry are correct, even while this is happening: HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment has TEMP = %SYSTEMROOT%\Temp HKCU\Environment has TEMP = %USERPROFILE%\AppData\Local\Temp By setting a breakpoint on shell32!RegenerateUserEnvironment, I'm able to trap it when it happens, but I still don't know why explorer.exe is reading the wrong environment variables. I can reproduce it consistently by broadcasting a WM_SETTINGCHANGE message (I wrote a one-line C++ program to do this). Watching the activity in Process Monitor shows that explorer.exe doesn't even look at HKCU\Environment. What is going on?

  Read the article

• 3 simple questions about file permissions

  - by Camran

  1- Wonder, is this a good setup of permissions in the /var directory? drwxr-xr-x 2 root root 4096 2010-05-30 03:34 backups drwxr-xr-x 7 root root 4096 2010-05-29 17:55 cache drwxr-xr-x 29 root root 4096 2010-05-29 17:55 lib drwxrwsr-x 2 root staff 4096 2009-07-14 04:36 local drwxrwxrwt 3 root root 60 2010-06-02 03:34 lock drwxr-xr-x 9 root root 4096 2010-06-02 03:34 log drwxrwsr-x 2 root man 4096 2009-09-20 20:36 mail drwxr-xr-x 2 root root 4096 2009-09-20 20:36 opt drwxrwxrwt 12 root root 420 2010-06-02 12:12 run drwxr-xr-x 4 root root 4096 2009-09-20 20:37 spool drwxrwxrwt 2 root root 4096 2009-07-14 04:36 tmp drwxr-xr-x 14 user root 4096 2010-05-30 22:21 www 2- Could you give me a brief explanation of the columns above? First one is which permissions they have. Second is a nr. Third and fourth says "root root" for example. fifth is another nr (4096 for example). and the others are obvious. 3- Could you give me a brief explanation of the folders above? Especially the "lock" and "tmp" folders. Lock contains an apache2 folder which seems empty. Thanks

  Read the article

• Menu command stuck on screen

  - by 280Z28

  For some reason, periodically when I select a menu command, the command label gets "stuck" on the screen and won't go away. I can close all open applications, including whichever one I was using when it got stuck, but it still won't go away. In the screenshot below, I opened an new instance of IE just to show how the label stays on top. The label was not created by this instance of IE. Edit with the source: The label that gets stuck is the first menu command I select in IE. If a label is already stuck, a new one does not get stuck (regardless of which instance(s) of IE are involved). Based on this knowledge, I now just open IE on my secondary monitor, carefully open the context menu so the Properties command is in the bottom corner, and click it. This is not a solution... The label never moves and is transparent to mouse input (if I click it, it's as if I clicked the item behind it). The label does not go away if I close all running applications. I haven't tried stopping services or closing system tray items like Live Mesh. The label does go away if I change the screen resolution and then change it back. Any ideas how I can stop this from happening? It's happened a half dozen times since yesterday and it's becoming quite disrupting to my work. Obviously I added the circle in MS Paint. That part isn't stuck. ;)

  Read the article

• Ubuntu and Windows and Separate HDs, oh my!

  - by LuxuryMode

  Need some major help. Running a Dell XPS/Dimension 630i. It came with "SATA 2 RAID 0 With Dual 500GB Hard Drives." I have installed a new, third non-raided drive and installed Ubuntu on it. So now I have Windows on the original hard drive and Ubuntu Linux on the new HD. When I get to the boot menu where I can select an OS, if I select windows I get an error: "No such drive, no such disk." Also, strangely in the first place, in order to even get to the bootloader menu I have had to disable ALL ports under the RAID config. Unless I do this, I will just get to a never-ending blinking cursor. I have tried every conceivable CMOS config and nothing else works. Tried setting port 3 (the new HD w/ Ubuntu) to first hard disk boot priority. Tried disabling all other ports and enabling the Ubuntu HD port and vice versa. Here's a pic of the error I get when I try to boot to Windows: http://imgur.com/TJ1mS. Also, please note that I can actually access all files from the raided Windows drive through Ubuntu. (Someone suggested just reinstalling windows from installation CD. Agree?)

  Read the article

• VMWare Workstation 8 Disk I/O & Hard Faults

  - by Scott

  I have VMWare Workstation 8 installed on a host machine with the following specs: Intel i5 2500k CPU 16GB DDR3 1600 ram 1TB Western Digital Caviar Black HD I have two Windows 7 virtual machines configured (currently running one at a time but will be operating both at once when my 32GB RAM kit arrives in a couple days). Each one is configured with 8GB of RAM and no tweaks/performance customizations or anything done. All of the VMWare settings are the defaults. When I boot into these machines and run various programs (Visual Studio, Outlook, etc), I can hear the disk thrashing quite a bit and checking Resource Monitor, I can see that I'm getting anywhere between 300-800 hard faults per second. From the host machine, it shows they're coming from the VMWare image. If I go to the virtual machine, whatever app I'm currently loading is the image that's causing the hard faults. As I understand it, hard faults are (simply) when an address in memory has been swapped out to the page file and has to be read from the page file instead of from memory. I don't understand why this is happening though. With 8GB of ram on the guest machine and 6.5GB available, what could be causing this? I know Windows 7 supposedly improved on page file management over XP but it seems excessive for this kind of slowdown, disk thrashing and high hard fault count when I have that much free RAM. Is there anything I can to to improve the performance in my guest machines? On the host machine, I can open/run any applications at all and hard faults stays around 0 with low disk I/O.

  Read the article

• Migrating JBoss installation and install it on a PHP server

  - by David Martinez

  I'm configuring a new dedicated server that is going to run 3 sites, 2 of then are migrating from a old server. Each site have it's own domain and dedicated ip. 2 of this sites are already up and running on php (one of then use cakePHP), the third site is a migration from an old server and it runs on JBoss. 1) Is it possible to have both Jboss and php running on the same Apache instance, or would I have to install a new one? 2) Can I just move the old JBoss server directory to the new server and start the server with the shell script? From what I red here JBoss is distributed as a zip/tgz file with the server structure, so moving it from the old server to the new one should be the same. I want to do this because the old server is already configured, and it have 2 JBoss instances. I didn't develop this site and I don't have experience with JBoss. I have some documentation of the site, but it is not much, mostly server structure and the technology they used. The new server runs on CentOS with CPanel, I have full root access to the server. This question is similar to this one How can I run JBoss Application Server and Apache on the same server? but there he didn't have a dedicated IP for each domain.

  Read the article

< Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >