Search Results

Search found 17782 results on 712 pages for 'questions and answers'.

Page 343/712 | < Previous Page | 339 340 341 342 343 344 345 346 347 348 349 350  | Next Page >

• Exchange on SBS2003 not receiving mail, but sending via telnet works

  - by YDdraigLas

  Last week we had a problem on our SBS2003 server where our external connection dropped out and I was only able to restore it by running netsh winsock reset catalog and netsh int ip reset. Thinking all was well, I went home for the weekend and came in today to find that we haven't received any external emails since before the original problems occurred. There are plenty of examples of this on the internet, usually to do with a firewall issue, but the odd thing here is that when I connect using telnet I can send an email and it goes straight through and into my inbox. When I send an email from Gmail or Hotmail nothing comes through at all. Internal emails are also unaffected, as are outgoing emails. There have also been a couple of emails that have come through for other users, both out-of-office replies, if that's relevant. I've run the CEICW several times, checked all the NIC settings, but no joy. Before I give up trying to fix this and reinstall the whole server, has anyone come across this problem before? I have only found fleeting references to this in previous searches and no real answers. Any advice gratefully received.

  Read the article

• Can you help me understand my SATA/RAID options?

  - by andrz_001

  I've a gigabyte GA-M720-US3 motherboard. Recently, I noticed the following during boot: IDE channel 0 Master (none) IDE channel 0 Slave (none) IDE channel 2 Master (my hdd) IDE channel 2 Slave (my dvd drive) IDE channel 3 Master (none) IDE channel 3 Slave (none) Of course, the same information is contained in the BIOS/CMOS. The HDD is connected to the mobo via a SATA(2?) cable at the port(?) labeled SATA2_0. The DVD drive is connected by a similar cable at SATA2_1. Why doesn't the information displayed during the boot and in BIOS reflect how I plugged the cables in? I mean, why "none" for channel 0 when there is something in SATA2_0. (or is that serious naivete on my part!?) Where's Channel 1 master and slave? Since these are SATA cables and not the IDE ribbons from a time ago, why the whole master/slave declaration during boot and in BIOS? Should my BIOS reflect the fact that these are SATA cables? I mean, in BIOS, should the "Onchip SATA mode IDE" be set to RAID or AHCI instead of IDE? Any replies, answers, suggestions, links, tips will be much appreciated. Thank you in advance!

  Read the article

• Fake demostration software for command line

  - by Joe

  I'm looking for some software that would be useful for giving demonstrations. I regularly have to show the effects of scrips ect to classes while talking about their effects, and equaly regularly I have finger trouble and have to rewrite various commands - wasting class time and general energy. I'd like to be able to record a sequence of commands in advance, and then play them back at the speed of my choosing. So I might have a file that containes the commands: echo "hello world!" ls ls -l ls -l | sort I'd like to be able to play these commands back by typing similar ones in. So I'd have a blinking command prompt and if I typed 'echo "hxxx' the command prompt would read home$echo "hell and if I typed any other letters the terminal would fill up with the remainder of the command until I press enter, when it executes the command. The point is that even if I screw up the command when typing it, the command that I'd prepared in advance would be executed. My question is - does similar software exist for giving demonstrations? or even, is this an easy thing to script up...? EDIT - two quick things first of all I'm on osx - but it would be nice to get a general solution for other people who arrive here from google. and second a lot of the comments/answers are concentrating on, in effect, making it fast and easy to enter long commands by means of hotkeys and the like. Actually I'd like it to at least look like I'm typing live - that's why I put in the bit about the one-to-one keymapping, but I don't think I explained that quite as well as I could have...

  Read the article

• Vista: window focus problem

  - by GateKiller

  Sorry for the vague title but this one is hard to explain so bear with me please. I'm using Windows Vista at work for web development and sometimes when I Click or Alt-Tab to background window, the window will get focus but it will not be brought to the front. In order to bring the window to the front, I have to click on the applications border (when the resize cursor appears) and the window will then jump to the front. I've had this problem for about a year now and it happens at least a dozen times a day, but it doesn't do this all the time - seems random. I hope I have explained the issue fully (and you've understood it) and would appreciate any constructive answers or comments to solve this problem. Example: If I Alt-Tab from Google Chrome to Notepad and this problem randomly occurs, Google Chrome will remain in front of Notepad, however, I will be able to type text into Notepad while the window is behind Google Chrome. Clicking on Notepad's content area will not bring it to the front but clicking it's window border will. Video Exampe http://vimeo.com/19388998 In this video, I clicked from Google Chome to UltraEdit and chrome stayed in font, but as you can see, I can still type in UltraEdit. I'm starting to believe that this could be a bug in Google Chrome so I'll continue to watch if this between other applications.

  Read the article

• Centralized backup method recommendation for SMEs with various OSes

  - by Akinator

  Hi I was wondering what in your opinion is the "best" method for having "everything" backed-up in the following situation. We are a SMEs with 10 computers in total. Three of those computers are MACs The rest are windows (1 vista, 4 win7 and 2 XPs) I'm very open to what the method should be but you should also consider the follwing: Very limited resources Quite "small" bandwidth (4 MBs for all (download) 0.4 MBs (upload, yep, thats it)- though this might get, a little bit better) One of the main thing to back up would be the mails, considerations: All windows computers use outlook, mainly 2003 There is one mac that uses outlook too (for mac of course - not 2011 yet) We also have to backup the files: Not a huge amount Very few very big files Very organizes (by machine) What I would like is to hear your opinions as to which would be the best method (or combination of methods - preferably one of course) considering. We are not sure what do we need and I'm open to suggestions, though an online (cloud based applications) would be great, remember the the bandwidth is unbearable. Last think to consider, it that we would like to do weekly updates (unless the method is very easy of course). Thanks in advance!! I tried to be as specific as possible, but if anything is needed I'll gladly update, please ask for any clarification needed! Please avoid any answers like upgrade all to windows 7 and throw away your macs :) our's may not be an ideal situation, but it is what it is, and right now, it would be impossible for us to change it for a lot of circumstances.

  Read the article

• Should I buy more RAM for my computer or a better CPU?

  - by Reijer The Coder

  I have recently bought a new laptop, an ASUS N56VJ-S4149H. I bought it to use it in all possible ways I could want, so that would be gaming downloading and streaming movies browsing the web and programming software. So far it has been running great but one thing annoys me a little bit. I frequently play Mount&Blade: Warband, it's a great game and you should check it out. Everything runs smoothly but only when I turn down the 'Texture Detail'. Otherwise it will lag a lot and I can't really play. Now my question is: Is this a problem of not enough RAM? At first I was really sure it was but after thinking about for a while I'm not anymore. My computer only has 4 Gigabytes of RAM and there is still a slot open. So will it improve when I buy another 8 Gigabytes? EDIT: It has an Nvidia GeForce GT 635M inside. and an Intel Core i5 3230M CPU with 2,6 GHz. Help and answers are really appreciated. Thanks to all.

  Read the article

• i7-980X at 70% speed

  - by Buxley

  Hi we bought a nice computer to use to solve optimization problems. Intel i7-980X@3,33 GHz with 12 GB of Team Group 1600 MHz DDR3 RAM. When we use Gurobi the computer uses all 12 cores at maximum in the beginning of the solve. However after a while (about 8 hrs) it all cores jump between 65 and 85% When I solve the same models on an i7 930 all cores are at a near 100% level even after longer solution times. We first thought that the Hard disk was the bottleneck since Gurobi writes out nodefiles after the memorylimit is used. However since the new computer have 12 GB of RAM we put the memorylimit to 7 GB so the solver only used the RAM and still with the same performance in the processor. Any ideas about the bottleneck? As I said earlier it works at 100% for the first hours or so . Thanks very much for any answers! Our plan was to overclock it but we can't even get it to work at normal speed yet!

  Read the article

• using nginx with proxy_pass on a subdomain

  - by marcus3006

  a have a rails app that should listen on the subdomain redmine.example.com (using proxy_pass). all other requests for *.example.com should just redirect to a normal index.html. Here is my configuration: server { server_name www.example.com example.com; root /home/deploy/static/example; } upstream redmine { server unix:/tmp/redmine.socket fail_timeout=0; } server { # you could put a list of other domain names this application answers server_name redmine.example.com; root /home/deploy/rails/redmine/public; access_log /var/log/nginx/redmine_access.log; rewrite_log on; location * { proxy_pass http://redmine; } location ~ ^/(assets)/ { root /home/deploy/rails/redmine/public; gzip_static on; # to serve pre-gzipped version expires max; add_header Cache-Control public; } } anyone knows what's going wrong here? requests to example.com and www.example.com are handled correctly. when i try to acces redmine.example.com = "couldn't resolve host"

  Read the article

• Google Apps Domain Level Shared Contacts?

  - by dkirk

  My firm just switched to Google Apps Premiere addition 2 weeks ago and aside from the way Google handles shared contacts, things are going quite well. Previously, on our Exchange server we had numerous shared contact lists set up in the shared folders. We had a separate list for vendors, sales agents, etc.. Is there not a way to set up lists or groups such as this on the domain level in Google Apps? I have found a ton of forums with users asking the same question but no good answers unless you purchase some third party app in the marketplace. I have toyed around with the "google-shared-contacts-client" here: http://code.google.com/p/google-shared-contacts-client/ and this almost does it but it falls short when trying to group contacts on the domain level or when trying to search for a contact by company name. Are either of these things possible? I am now looking to create a Google Doc spreadsheet to share with the domain just to have a separated defined list of contacts that is search-able by various fields... Anyone who could shed some light on domain level contact sharing relating to the points above, I would be most grateful...

  Read the article

• Expire Files In A Folder: Delete Files After x Days

  - by Brett G

  I'm looking to make a "Drop Folder" in a windows shared drive that is accessible to everyone. I'd like files to be deleted automagically if they sit in the folder for more than X days. However, it seems like all methods I've found to do this, use the last modified date, last access time, or creation date of a file. I'm trying to make this a folder that a user can drop files in to share with somebody. If someone copies or moves files into here, I'd like the clock to start ticking at this point. However, the last modified date and creation date of a file will not be updated unless someone actually modifies the file. The last access time is updated too frequently... it seems that just opening a directory in windows explorer will update the last access time. Anyone know of a solution to this? I'm thinking that cataloging the hash of files on a daily basis and then expiring files based on hashes older than a certain date might be a solution.... but taking hashes of files can be time consuming. Any ideas would be greatly appreciated! Note: I've already looked at quite a lot of answers on here... looked into File Server Resource Monitor, powershell scripts, batch scripts, etc. They still use the last access time, last modified time or creation time... which, as described, do not fit the above needs.

  Read the article

• screen scraper templates for various websites

  - by intuited

  I'm looking specifically for a convenient way to locally archive posts from this and other similar sites. I'd like to separate the question itself from the answers, or maybe crop the question and store it, keeping the page title. Obviously I don't need to store the menu or the various other site interface chrome. The best way to do this would seem to be to associate an XSLT template with a match on the URL and use that template to pull the various relevant informations and format them. My two-part question: Is there a tool specifically built for this task? I.E. something that takes a URL and checks it against a map of path-matching expressions to templates, and outputs the result of applying the template to that resource? xmlto seems to be most of the way there, and could probably just be called from a script that does the pattern-matching, but something already integrated would be more convenient. Is such a URL_pattern-to-XSLT_template map publicly available somewhere? Question 2.5: Is it legal to do this with sites like this one that have public licenses on their content?

  Read the article

• Running router as virtual machine, can it be realible ?

  - by Kr1stian

  Hi all Does anyone here run their routing through virtual machine, have virtual machine setup as main router/getaway etc ? If yes, how many clients are using this kind of setup ? For those who are wondering why I'm asking this. I got assignment for my internship to create all in one "box" which would do routing and be IP PBX in one time ( only open source solutions can be used, expect RouterOS). The routing part is currently done through RouterOS and for VoIP they want to use sipXecs. RouterOS supports virtualization through KVM, but RouterOS itself only supports 2GB of memory ( and wont support more in near future). sipXecs needs allot more than 2GB. I told them that we could solve this problem by putting RouterOS as virtual machine to 64bit hostOS ( e.g. CentOS), and other virtual machine would run sipXecs. By that we would be able to use whole memory. But they told me that it's to risky to do something like that and that they need something with "enterprise stability/reliability". I told them that we could make redundant image of each VM which would automatically start if one VM stop's working, but I was told the same thing. So this is why I asked those question above, to see if I really suggested something that's not good to do, or maybe this is something completely normal and it can be done with "enterprise stability/reliability" :) Thank you for answers, Kristian

  Read the article

• How is it possible to list all folders that a particular user/group has permissions on?

  - by Lord Torgamus

  Is it possible to list all folders/files that a given group has explicit permissions on, for a machine running Windows Server 2003? If so, how? It would be nice to see inherited permissions as well, but I could do with just explicit permissions. A little background: I'm trying to update groups/permissions on a test server. One of the groups, Devs, wasn't implemented correctly when it was created, and my goal is to remove it from the system. It has been replaced by LeadDevelopers, which has permissions on many — but naturally not all — of the same folders. I want to make sure that I don't accidentally orphan any folders or cause any other issues when I remove Devs. It did have some admin-level permissions. EDIT: The answers so far — at least *cacls and AccessEnum — provide a way to find out which groups/users have permissions on known directories/files. I actually want the reverse of this behavior: I know the group, and I'm looking for the directories/files for which the group has permissions. Also, as I noted in a comment, the Devs group is not itself a member of any other group.

  Read the article

• Ping results "echo'd" out to a text file on Windows XP machine has unusual character rather than the outcome

  - by Richard Rice

  Here is the situation. I have a Windows XP machine that I would like to ping another machine and send the output to a text file for review at a later date. This is quite a standard question with several answers on this website and others. The issue I have is that when reviewing the txt file afterwards, the outcome of the ping appears as a strange character. A screenshot of the text file output can be found at the following link. Please note its the first 8 ping outputs that have a strange character. The %%B was me hoping that would output what I wanted! (Cannot upload image to any hosting websites because the company I work for seems to be afraid of them ....) Here is the code I'm using: @echo off For /f "tokens=1-2 delims=/:" %%b in ("%TIME%") do (set mytime=%%a%%b) PING 1.1.1.1 -n 1 -w 1000 >NUL for /f "tokens=*" %%A in ('ping 192.168.5.2 -w 10 -n 1') do (echo %date% %time% %%A >> C:\Temp\Ping_Checks\GarrickSide.txt && GOTO Ping ) :Ping PING 1.1.1.1 -n 1 -w 1000 >NUL for /f "tokens=* skip=2" %%A in ('ping 192.168.5.2 -w 10 -n 1') do (echo %date% %time% %%A >> C:\Temp\Ping_Checks\GarrickSide.txt && GOTO Ping ) This code works fine on a Windows 7 machine, but not on a Windows XP machine. It appears that the echo command isn't outputting the right data, but I don't understand this enough to correct it. Can anyone spot where I'm going wrong?

  Read the article

• Can I use HP Recovery Discs for a different hard drive capacity and make?

  - by Fasih Khatib

  About two years ago I created HP Recovery Discs (3 of them). Now my hard drive has crashed and new one is still a week from delivery. I was reading up on how to reinstall the genuine OS using the Recovery Discs as i was not given any Windows 7 installation discs. I did my bit of research after getting answers from the community on what these discs do and found out on other sites that people experience issues when recovering their OS from the disc. Especially when they change the make or capacity of the harddrive. Unfortunately I had to change the make as the hard drive that came built in has gone out of production. This question is just a part of my checklist to avoid problems when recovering the OS. I have: HP DV4-2126TX (available only in India I guess) I had: Seagate Momentus 320 GB I ordered: Western Digital Scorpio Black 500 GB Windows 7 Home Premium 32-bit Is there a possibility to encounter any problems due to the changed capacity and make? I only want my genuine OS and drivers – not my data. I was told that Disc 1 contained the OS and drivers, and the rest of the discs contained data. I couldn't verify that.

  Read the article

• Xen or KVM? Please help me decide and implement the one which is better

  - by JohnAdams

  I have been doing research for implementing virtualization for a server running 3 guests - two linux based and one windows. After trying my hands on Xenserver, I am impressed with the architecture and wanted to use the opensource XEN, which is when I am hearing a lot more about KVM, about how good it is and it's the future etc. So, could anyone here please help me answer some of my queries, between KVM and XEN. Based on my requirement of three VMs on one server, which is better for performance - KVM or XEN, considering one the linux vm's will works a file-server, one as a mailserver and the third one a Windows server? Is KVM stable? What about upgrades.. What about XEN, I cannot find support for it Ubuntu? Are there any published benchmarks on both Xen and KVM? I cannot seem to find any. If I go with Xen, will it possible to move to KVM later or vice versa? In summary, I am looking for real answers on which one I should use.. Xen or KVM?

  Read the article

• What other ways can I load balance EC2 servers without using Elastic Load Balancing?

  - by undefined

  I have a web application that consists of a web server managed by a web hosting firm, a set of EC2 instances in amazons cloud and a MySQL database (hosted on the webserver). MySQL is behind a firewall and is set to allow access from Localhost and from a single IP address which is an Amazon Elastic IP address that is attached to the EC2 instance I have been running up to now. The problem is that I want to look at my scaling up and load balancing strategy for my EC2 instance. To this end I have been investigating the Elastic Load Balancers and Autoscaling tools that Amazon provides and have managed to set this up fine but for one thing - connecting to the MySQL database running on my webserver. I realised (thanks to answers on Serverfault) that I needed to check firewall settings and add the IP address for the load balancer, however Elastic Load Balancers provide you with a DNS name, not an IP address and infact the IP addresses change over time so this will not work. I have been told by the company hosting the database that the way the firewall works is to look up the IP address of the DNS name and store the IP rather than the DNS name. so basically this will not work and the only way to allow access would be to open up the SQL port to allow access from anyone! Is this a viable idea? Should I look at moving my database into the cloud? Is there another firewall that the server company can use? Should I find another way of load balancing (if so what?) tricky one eh? any help appreciated!

  Read the article

• Driver corruption when deploying Dell Touchpad Drivers (with software) during imaging process

  - by BigHomie

  We're an sccm shop, and use it to deploy Windows. When deploying Dell laptops (multiple models), the touchpad drivers seem install properly, but the software doesn't. The resulting problem is that when the touchpad is pressed on occasion, the mouse pointer will 'jump' to certain points on the screen. A possible symptom of this problem/visible sign is if the touchpad icon isn't in the system tray. The software is in the control panel, but when opened part of the gui is pixelated, indicating botched install maybe? The manual resolution to this, is to go into device manager and uninstall the driver with the option to uninstall all driver software. After a restart, the driver and software is apparently reinstalled, and from there works as expected. Obviously this partially defeats the purpose of a zero touch deployment. If anyone knows why this is and/or a possible workaround, those answers would be valid as well. Barring that, I want to find a way to deploy the driver and touchpad software in an unattended way, so that it can be conditionally installing during the imaging process. To be honest I'm not sure how to troubleshoot this, I suppose I could try drvinst.exe to install the driver, but finding out why this fails initially would keep me from spinning my wheels.

  Read the article

• i7 x980 at 70% speed

  - by Buxley

  Hi we bought a nice computer to use to solve optimization problems. intel i7 X980@3,33 Mhz with 12 Gb of Team Group 1600 MHz ddr3 Ram. When we use Gurobi The Computer uses all 12 cores at maximum in the beginning of the solve. However after a while (about 8 hrs) it all cores jump between 65 and 85% When I solve the same models on an I7 930 all cores are at a near 100% level even after longer solution times. we first thought that the Harddisk was the bottleneck since Gurobi writes out nodefiles after the memorylimit is used. However since the new computer have 12 GB of Ram we put the memorylimit to 7 GB so the solver only used the RAM and still with the same performance in the processor. Any Ideas about the bottleneck? As I said earlier it works at 100% for the first hours or so . Thanks very much for any answers! Our plan was to overclock it but we can't even get it to work at normal speed yet!

  Read the article

• Problem with connecting two different networks

  - by tanascius

  I have two networks: 192.168.13.0/24 (blue) and 192.168.15.0/24 (green). Computer A is connected to the 13-net, only. Computer B has two interfaces, one in each network. There is third computer that acts like a router and connects the 13-net to the 15-net (only in this direction). Now, I'd like to ping 192.168.15.100 from computer A to B. Unfortunately there is never a reply. But when I use a hub instead of a switch it works. In my opinion the ping packet travels through the switch to the router (which is the default route/gateway for A). The router sends the packet back to the switch to B. Probably B receives it on its 15-net interface but answers with it's 15th interface? Is this possible? The problem is, that B may have only a gateway 192.168.13.50 - but I am not really sure of it (B is a embedded system with limited configuration possibilities). Can anyone explain what happens here? Thank you!

  Read the article

• Why do I get swap space related errors when I still have lots of free memory in Solaris 10?

  - by Tom Duckering

  I am seeing a few of my services suffering/crashing with errors along the lines of "Error allocating memory" or "Can't create new process" etc. I'm slightly confused by this since logs show that at the time the system has lots of free memory (around 26GB in one case) of memory available and is not particularly stressed in any other way. After noting a JVM crash with similar error with the added query of "Out of swap space?" it made me dig a little deeper. It turns out that someone has configured our zone with a 2GB swap file. Our zone doesn't have capped memory and currently has access to as much of the 128GB of the RAM as it need. Our SAs are planning to cap this at 32GB when they get the chance. My current thinking is that whilst there is memory aplenty for the OS to allocate, the swap space seems grossly undersized (based on other answers here). It seems as though Solaris is wanting to make sure there's enough swap space in case things have to swap out (i.e. it's reserving the swap space). Is this thinking right or is there some other reason that I get memory allocation errors with this large amount of memory free and seemingly undersized swap space?

  Read the article

• Repeated installation of malicious software to do outbound DDOS attack [duplicate]

  - by user224294

  This question already has an answer here: How do I deal with a compromised server? 12 answers We have a Ubuntu Vitual Private Server hosted by a Canadian company. Out VPS was affected to do "outbound DDOS attack" as reported by server security team. There are 4 files in /boot looks like iptable, please note that the capital letter "I","L". VPS:/boot# ls -lha total 1.8M drwx------ 2 root root 4.0K Jun 3 09:25 . drwxr-xr-x 22 root root 4.0K Jun 3 09:25 .. -r----x--x 1 root root 1.1M Jun 3 09:25 .IptabLes -r----x--x 1 root root 706K Jun 3 09:23 .IptabLex -r----x--x 1 root root 33 Jun 3 09:25 IptabLes -r----x--x 1 root root 33 Jun 3 09:23 IptabLex We deleted them. But after a few hours, they appeared again and the attack resumed. We deleted them again. They resurfaced again. So on and so forth. So finally we have to disable our VPS. Please let us know how can we find the malicious script somewhere in the VPS, which can automatically install such attcking software? Thanks.

  Read the article

• mysqldump --where with = operator doesn't get all rows = - Help!

  - by JonathanLIVE

  I have a situation with a particular table that now thinks it contains 4 Petabytes of data. I know that sounds cool, but I assure you, it is only on a 60GB partition. This table has 9 fields in it. One of them is a domain_id field. It is the best field to identify the rows by, as there are only approximately 6300 of them. The only other field option to match has over 2million records, and thats just more difficult. I cannot do a straight mysqldump because it will attempt to output all 4PB of data and fill the drive long before it gets close to that, so I need to surgically remove the good stuff, destroy the db, and recreate it. I believe if I can do a dump for each domain_id record, then I will get most of the usable data out of it. This is what I am trying to use: mysqldump -u root --skip-opt -q --no-create-info --skip-add-drop-table --max_allowed_packet=1000000000 database table --where="domain_id=10" domains10.sql Using this I expect every row with the domain_id 10 to be exported. However, when I check the export, I am only getting 1 row, when however I look at the db, there are many many rows. It is as though the operator just finds one, then gives up. I have tried various operators. Using the < or I am able to get more of the data, but the export stops short at certain rows where the data has been compromised. With over 6000 to go through, I can't narrow down which rows are being affected in the export easily enough. So, what I need is an operator that will basically do what I thought = would do, simply give me an export of all records that match the specific field. Also note, the only way I got this DB even accessible is through an innodb force recovery 3. So I need to get this right, because after this is done, I have to drop the db in order to make mysql functional again. Looking forward to any helpful answers.

  Read the article

• Windows VPN client connect on different port

  - by John Gardeniers

  Scenario: Two Windows Server 2003 machines running RRAS VPNs. The firewall port forwards 1723 to one of those machines for normal remote access. I'd like to find a way to connect to the second machine as well. Not because I need to but just because it's the sort of thing I reckon should be possible but can't figure out how to do. Is it possible to have the Windows PPTP VPN client (on XP in this instance) connect on a port other than 1723? If so, I can simply port forward another port to the second server. I've done a fair bit of Googling over the last few days and have only found others asking the same question but no answers. I have of course tried to add a port number in the host name or IP connection box, in various formats, but to no avail. While this might be possible with a third part client I'm really only interested in whether or not it can be done with the Windows built-in client and if so how?. Perhaps there's a registry hack I'm not aware of?

  Read the article

• Creating dynamic map graphs

  - by Mehper C. Palavuzlar

  I need a software (or softwares) to achieve the following. I'm not sure if it could be done, but I'd like to hear the suggestions from super users. The data I want to use for graphing purposes include sales figures of magazines by provinces. There are 81 provinces of Turkiye, and I want the computer to automatically paint / write on a graph according to the sales magnitude of the provinces. Since there are loads of magazines with loads of issues, the process must be executed automatically just after selecting the related magazine and issue. So there will be graphs showing the sales weight of the whole country with some nice illustrations. Those graphs might be used as part of some decision support mechanism to help field teams. Is it possible? I have all the data and base maps of Turkiye to be filled/painted. I'm sure this is not easy. If there is a way to do that, it might probably include more than one software. Thanks in advance for any valuable comments and answers.

  Read the article

< Previous Page | 339 340 341 342 343 344 345 346 347 348 349 350  | Next Page >