Search Results

Search found 20904 results on 837 pages for 'disk performance'.

Page 345/837 | < Previous Page | 341 342 343 344 345 346 347 348 349 350 351 352  | Next Page >

• harddrive problem (usb external)

  - by masfenix

  Hey guys I am using a Maxtor One Touch 3 given to my by my uncle. It is connected through USB2.0 When I plug it in, XP installs it and says "the device is ready to use". But it dosnt show up on my computer. It dosn't even show up in disk mangement. I then install Acronis Disk Director (which detects it) but marks it as offline. if i try to change it to online, nothing happens. (actually the lights on the HD blink - meaning communication and goes back into offline mode). The lights on the HD return to a solid which mean "working properly". Here is a screenshot: Is there any way to extract the data off the drive? is the drive corrupt? sitll useable? edit: DISKPART screenshot: edit2: I ran Seagate diagnostic tool and this came up: Long Generic - Started 9/10/2010 6:44:36 PM Bad LBA: 0 Unable to repair Long Generic - FAIL 9/10/2010 6:46:41 PM SeaTools Test Code: 4

  Read the article

• How much space do NTFS hardlinks/symlinks occupy?

  - by Felix Dombek

  Well, I guess it must be something proportional to the original filename plus the new filename for symlinks, and only the new filename for hardlinks, but how does this affect the disk space exactly? I just made a folder with about a hundred thousand symbolic links in it, and the folder still reported 0 bytes usage. I may be mistaken, but I even think the free capacity of the drive remained the same. Then I permanently deleted the folder and the sizes still stayed the same. Could I fill up a hard disk just with symlinks? Or does NTFS have limitations in that no more than x symlinks are allowed on one drive/in one folder, so the capacity of the drive cannot be reached?

  Read the article

• I found a some bad sectors with chkdsk. Should I be worried?

  - by mottalrd

  Yesterday I found a corrupted file in my external usb drive. Since I am using the drive quite often (I am running my vms over there) I decided to run the chkdsk on it This is the result 488384000 KB of total space on disk. 351202364 KB in 1042390 file. 489920 KB in 81101 indexes. 16 KB in damaged sectors. 1204584 KB in use. 65536 KB used from the registry. 135487116 KB available on disk. therefore it has found 16KB of damaged sectors. Now the file is recovered Should I be worried about the HD and run chkdsk periodically from now on?

  Read the article

• Determine Location of Inode Usage

  - by Dave Forgac

  I recently installed Munin on a development web server to keep track of system usage. I've noticted that the system's inode usage is climbing by about 7-8% per day even though the disk usage has barely increased at all. I'm guessing something is writing a ton of tiny files but I can't find what / where. I know how to find disk space usage but I can't seem to find a way to summarize inode usage. Is there a good way to determine inode usage by directory so I can locate the source of the usage?

  Read the article

• Linux Software Raid runs checkarray on the First Sunday of the Month? Why?

  - by mgjk

  It looks like Debian has a default to run checkarray on the first Sunday of the month. This causes massive performance problems and heavy disk usage for 12 hours on my 2TB mirror. Doing this "just in case" is bizzare to me. Discovering data out of sync between the two disks without quorum would be a failure anyway. This massive checking could only tell me that I have an unrecoverable drive failure and corrupt data. Which is nice, but not all that helpful. Is it necessary? Given I have no disk errors and no reason to believe my disks have failed, why is this check necessary? Should I take it out of my cron? /etc/cron.d# tail -1 /etc/cron.d/mdadm 57 0 * * 0 root [ -x /usr/share/mdadm/checkarray ] && [ $(date +\%d) -le 7 ] && /usr/share/mdadm/checkarray --cron --all --quiet Thanks for any insight,

  Read the article

• Converting an ancient RH8 system to VMware ESXi

  - by donatello

  I am curious to know what options I have to convert a very old RedHat8 machine to a virtual one on ESXi. Looking at VMware Converter it seems there's an option to login to the RH8 using SSH, and from there it will convert to the ESXi-server. That makes me a bit nervous though, exactly what is happening there? The RH8 machine is slightly critical, and if anything messes up it'll likely result in many hours extra work. :( Another option I thought of was to boot a LiveCD on RH8-system and create a raw "dd dump" of the disk. The similar method is used to restore the image, I boot a LiveCD on the VM in ESXi and use "dd" to write it to disk. Is there any other option I could use? I'm using the cheap version of ESXi, hence I have no access to the Converter BootCD so these rather cumbersome methods is the only I can think of. :)

  Read the article

• Can't boot into XP after setting up dual boot with Win 7 vhd.

  - by bebop

  I set up a dual boot for win 7 from vhd on 2 xp machines. One of them everything went fine, and I get the option to choose the os when I turn the machine on. The other was slightly different in that rather than seeing the current OS disk (the one with XP on) as the c:\ when I was setting up windows 7 vhd during install it saw the disk as d:. I didn't think anything of it and went ahead and created a vhd on the d: drive. Now when I turn this machine on, it boots straight to win7 and I never get the option to choose xp. When I look at the boot option in msconfig, I only see Windows 7. How can I go about adding the old XP drive as a boot option at startup again? Edit: Strangely when I rebooted this time (perhaps the first time since I removed the install DVD) it boots to XP. I suppose I'll just have to reinstall windows 7 again in a new vhd...

  Read the article

• USB connection issue

  - by user1664417

  Currently Im facing an issue when Im trying to connect any usb flash drive to my pc. ok, below is what happens to me: 1) I can connect usb keyboard and mouse without any issue. 2) however when i connect usb flash drive, there are 2 situations that are occuring randomly a) there is no usb drive mount in my computer, when device manager is checked, it shows error code 10, but is shown in disk management. b) my computer will have usb drive mounted, but when I click on it, it is empty. on right click the properties, the disk space show 0. (there are files within the usb) what i have done is: 1) run CCleaner to repair the registry, restart and try, but still not working. 2) uninstall the drive in device manager, restart and try, but still not working. 3) tried the port that connects mouse and keyboard, but does not work. anyone who experienced these problems before please guide me. any suggestions or solutions would be greatly appreciated. Thanks, Tony

  Read the article

• Unable to create a Windows 7 system image of a failing hard drive

  - by Rahul

  The hard disk of my one year old T400 Thinkpad has started failing periodic hardware tests. I get a "Targeted Read Test Failed" error. The "SMART short self test" times out. I am now trying to create a Windows 7 System image of the hard disk but it fails without giving any specific error messages. I tried using Comodo Backup but got an error (code 101117) there as well. I have copied the important files in Dropbox but would like to take a full System backup as I have plenty of software installed on the machine. Does anyone know why this is happening and how I can take a backup of the system image ?

  Read the article

• Nginx vs Apache as reverse proxy, which one to choose

  - by mhd

  Hi, this kind of question maybe has been asked here but I couldn't find any that really match my question. Heard that nginx performance is quite impressive, but Apache has more docs, community(read:expert) to get help Now what I want to know, how both web servers compare in term of performance, easiness of config, level of customization,etc. AS REVERSE PROXY server in a vps environment?? I'm still weighing between the two for a ruby web app(not ROR) served with thin server. Specific answer will be much appreciated. General answer not touching the ruby part is okay. I'm still noob in web server administration.

  Read the article

• Why obfuscating a serial number of a device? What is the risk?

  - by Horst Walter

  In one of my xx.stackexchange questions I've got an answer, in which the user has obfuscated his disk's SN (serial number). Recently I have seen this in several photos as well, the SN was blurred out. I' am just curious, because I have never paid attention to this. What could be the potential risk in publishing a device's SN? I do see some sense when it comes to a MAC address, OK, this could be used for tracking. But a SN of a disk, iPad, whatsoever? Maybe there is an important reason for not publishing it, which I haven't seen so far.

  Read the article

• Robocopy to copy only new folders and files

  - by Valery Shampal

  A task: To find all new files and subfolders under some root folder (let us say Documents) and to copy them to other disk (j: in this case) Command line used: robocopy c:\users\valery\documents j:\robocopy /XO /E /MAXAGE:20131030 /XD Result: A full folders tree created. Only new files copyed, as supposed. It's good A point is, that I do not want to create all subfolders on a target disk, if there are no new files in them. Results are exeptable, but there is a lot of work to go through all folders and to find new files, as well, as to understand, what subfolders are a new ones Regards, Valery

  Read the article

• Why does HDTune report better performing drives 2 months after installing them?

  - by Rolnik

  OK, so this is really weird. I ran HDTune on a newly set-up home-built computer and got the following readings from my drives in mid-November. SSD 154 MB/s RAID1 87 RAID0 198 (software installs) RAID0 98 Swap drive Today, in January, I run HDTune (same version) and get these results, in MB/s: SSD 186 RAID1 98 RAID0 241 RAID0 98 (Swap drive) Here are more details that HDTune reports on the SSD drive: HD Tune: OCZ-VERTEX Benchmark Blockquote Transfer Rate Minimum : 135.4 MB/sec Transfer Rate Maximum : 219.4 MB/sec Transfer Rate Average : 185.7 MB/sec Access Time : 0.1 ms Burst Rate : 187.3 MB/sec CPU Usage : -1.0% To get to my question: Why are my hard drives improving in performance? Most of my logical drives are in some form of RAID, except for the SSD. Will this performance ever deteriorate? Note, none of my drives are a hybrid drive that uses some form of SSD to enhance the write/reads on actual platters.

  Read the article

• end_request: I/O error, dev sda, sector xxxxxxxxx

  - by muruga

  I have a IBM server. This server contains 3 hard disk with RAID 5. It was working fine earlier. Unfortunately this machine got the following error message. After that I have rebooted the systems. After that I am getting the following error message in kern.log and demsg kernel: [65896.678870] end_request: I/O error, dev sda, sector 17430271 kernel: [69263.783957] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK : [69263.783957] sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] kernel: [69263.783957] sd 0:0:0:0: [sda] Add. Sense: Internal target failure Whether it is kernel problem or hard disk problem or Raid problem

  Read the article

• I need some MySQL lookup table advice

  - by Gary Beam

  I have a MySQL database with about 200 tables. 50 of these are small 2-field 'id-data' lookup tables. Several of these DB's are hosted on a shared server. I have been informed that I need to reduce the total number of tables in the shared hosting environment because of performance issues relating to too many tables. My question is: Could/Should the 50 2-Field lookup tables be combined into a single 3-field table with 'id-field_name-data' Fields? Even if this can be done, I will have a lot of work to do on the PHP user application. My other choice is moving the DB's to a dedicated server at much higher hosting cost. I don't believe my 200 table DB's are actually causing any performance issues on this shared hosting server, at least not from the user application standpoint. There are never more than 10 of these tables joined in any single query; although I have seen some very-slow queries generated by phpmyadmin on these DB's.

  Read the article

• Samba / smbd on Centos 6.5

  - by Satalink

  I've installed Samba4 and have the smb.conf file as follows: [global] workgroup = WORKGROUP server string = Samba Server realm = REXIALO.COM netbios name = REXIALO.COM security = user map to guest = Bad Password bind interfaces only = no interfaces = lo venet0 log file = /var/log/samba/samba.log max log size = 1000 [webroot] path = /usr/local/apache/htdocs comment = Example.com webroot directory read only = No I can connect from the same server with smbclient. Localhost: # smbclient -L localhost -U root Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Sharename Type Comment --------- ---- ------- webroot Disk RexiAlo webroot directory IPC$ IPC IPC Service (RexiAlo Samba Server) Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Server Comment --------- ------- Workgroup Master --------- -------Enter root's password: network: # smbclient -L rexialo.com -U Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Sharename Type Comment --------- ---- ------- webroot Disk RexiAlo webroot directory IPC$ IPC IPC Service (RexiAlo Samba Server) Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Server Comment --------- ------- Workgroup Master --------- ------- The problem is when I try to map to the smb webroot from Windows 7, it asks for user/pass but just times out and then prompts for credentials. The samba.log file does not show any activity other than the startup of the smbd process. Any help would be appreciated.

  Read the article

• VirtualBox: Grub sees hard drive, Linux does not

  - by thabubble

  I installed Linux on my second hard drive. I can boot to it just fine. But when I try to boot it from a Windows 7 host using http://www.virtualbox.org/manual/ch09.html#rawdisk, grub sees it and can load vmlinuz and initramfs. Log: :: running early hook [udev] :: running hook [udev] :: Triggering uevents... :: running hook [plymouth] :: Loading plymouth...done. ... Waiting 10 seconds for device /dev/disk/by-uuid/{root UUID} ... ERROR: device 'UUID={root UUID}' not found. Skipping fsck. ERROR: Unable to find root device 'UUID={root UUID}' It then drops me into a recovery shell. I checked "/etc/fstab" and it's empty, there are also no sd* devices in dev, the only thing in /dev/disk/by-id is a VBox CD device. I'm not too good with these kinds of things so help would be greatly appriciated.

  Read the article

• To Run Linux (Ubuntu) on Windows 7, is using Virtual PC one of the best ways?

  - by Jian Lin

  I need to try Linux (Ubuntu) and feel hesitant to install Ubuntu on top of a Win 7 machine to dual boot (might need to use Win7 and Ubuntu at the same time). Is creating a Virtual PC on Win7, and then installing the latest Ubuntu on that Virtual PC one of the better option? So I think I can create a Virtual PC with an empty virtual hard disk (vhd), say, for 30GB, and then put in the Ubuntu DVD-R or CD-R to install Ubuntu onto that empty hard disk. Update: for some reason, the first time Ubuntu 10.04 installation CD-R boots up, it asked for the Language, and "Install Ubuntu" and then the screen has vertical green bars and then the VPC just closed. The 2nd or 3rd time it booted up, there is no asking of Language or "Install Ubuntu" and just shut down the VPC, sometimes with vertical green bars. I even created another new hard drive and same thing happened. And created VPC 02, and same thing happened. Created VPC 03 with a fixed hard drive size of 60GB and same thing happened.

  Read the article

• Why sizes are different, and what do they mean?

  - by Ramy

  I have a 1 TB hard drive that consists of one NTFS partition which I use to back up my data (no operating system). The size of all the data in it is : 726 GB, size on disk: 728 GB, and the used space when I check the properties is: 731 GB. There's a 5 GB difference between the size and the used space. Why is that huge difference there? What's the difference between these sizes? (size, size on disk, and used space) Is there a way to calculate the difference, and be sure the HDD is not messing around? Is that normal?

  Read the article

• TrueCrypt with blank password

  - by TheSavo

  This might sound like an odd question, but please hear me out. I want to setup my laptop to use TrueCrypt, but without a password. My wife doesn't travel much with her notebook. There are occasions where we will have to travel and bring the notebook with us. This is when we would like the have the encryption. The time it takes to to change the unlock pass-phrase is considerably less than it takes to encrypt the drive. My thoughts are to leave the disk encrypted but with no password. Then when it's time to pack for a trip and bring the laptop, we would then change the pass-phrase and create a rescue disk.

  Read the article

• USB Format Error

  - by Dan Finan

  I'm having a real headache trying to reformat a USB drive. Initially it had a 200mb EFI partition and it caused the drive to disappear altogether. Since then I ran the CMD and wiped the disk using 'diskpart'. It took a few attempts but it finally cleaned the drive. Since then it has reappeared under (:E) however I am unable to access the drive and Windows is preventing me from reformatting it. I am just presented with 'Windows was unable to complete the format'. It's now acting like a CD drive instead of removable storage. I've tried going through Disk Management and I'm presented with the same error. I've removed the USB controllers from Device Manager - when the drive is connected again it re-installs the drivers and acts the same way. Any help given will be greatly appreciated, thank you. (Windows 7 machine)

  Read the article

• Does OEM partition stores Windows 7 serial key ?

  - by Mahesha999

  Does OEM partition stores the serial key which is grabbed by the Win 7 setup done from the disk provided with laptop. I realized that when you install clean system from Windows 7 disk you get with laptop, it grabs the serial key or it doesn't ask one. So from where it gets that serial key. Is it the OEM partition or anything else? Or the recovery partition stores the key? What all the things these two partitions do store in them?

  Read the article

• What does the the reconstruction process of mdadm do exactly on raid10

  - by Azrael

  I've got a system with 4 disks set up as raid10. All disks are usable, and mdadm all states them with UUUU. Due to a recent system crash, the raid is currently reconstruction the raid as it was marked as "not clean," and a reconstruction process was started. On a closer look smartctl shows problems on one disk: sd 0:0:0:0: [sda] Unhandled sense code sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 24 cd 78 d4 sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed sd 0:0:0:0: [sda] CDB: Read(10): 28 00 24 cd 75 1e 00 04 00 00 With a research about the reconstruction process, I only found information concerning raid5 but nothing for raid10. Can I replace this problematic disk during the reconstruction process, or will I kill the raid with this?

  Read the article

• Resizing Windows 7 bootcamp partition

  - by Charlie

  I've installed Windows 7 on my Mac using bootcamp but stupidly only allocated it 25gb which isn't enough once I've installed Visual Studio and other stuff. I was able to shrink the Mac partition using whatever tool it is in Mac OS Snow Leopard but it wouldn't let me increase the windows partition so I rebooted into Windows to try it but am still having problems: I coudn't extend it using the disk management tool because the option is greyed out so I tried diskpart.exe but when I use the extend command with my partition selected it says: Virtual Disk Service error: There is not enough usable space for this operation. I've got 19.69gb of unallocated space though so am not sure why I'm having the problem. I don't want to have to wipe my Windows partition, any ideas?

  Read the article

• Few questions on giga tweaker

  - by user23950

  I better consult first the people here before I do anything unnecessary using this app called giga tweaker. I don't really understand what this increase the performance of your CPU thing. It is under Customization-Memory Management-ram & disk cache of giga tweaker. What will happen if I change the level cache size of l2 cache into the highest possible value which is 8Mb. What are the negative effects of doing it? The file system caching memory, still under Customization-Memory Management-ram & disk cache. What effects will it have on my system which has 2Gb of Ram and 2.50 Ghz of Dual Core CPU. Please enlighten me.

  Read the article

< Previous Page | 341 342 343 344 345 346 347 348 349 350 351 352  | Next Page >