Search Results

Search found 25124 results on 1005 pages for 'install upgrade'.

Page 346/1005 | < Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >

  • error: you need to load kernel first

    - by Angelos318
    I made a clean install on my Sony Vaio laptop, of Ubuntu 11.10 and when the installation was ready, it prompted to remove the usb I was installing the distro from, and press enter to reboot. After this reboot the first thing I got was the following error: error: couldn't read file error: you need to load the kernel first Press any key to continue.. After that it throws me back to the Grub select screen: Ubuntu, with linux 3.0.0-14-generic-pae recovery mode previous linux versions (none since I made a clean install) memory test If i choose the first option it shows only a black screen and never loads anything. If i reboot the same thing happens. Could I repair this using boot-repair? Is there any other way? Note: I know nothing about linux code so i am a total noob on this one Update: boot-repair did not help Grub.cfg here: http://pastebin.com/GKLuDuhM Boot Info Script: http://pastebin.com/indARkKJ

    Read the article

  • Ubuntu multiple issues (blank screen)

    - by Donavon
    Computer Specs I am having difficulties, to get Ubuntu 11.10 to work. For the 11.10 version, if I click install, or if I click try Ubuntu, I only get a blank screen, that just stays there. If I use "nomodeset", it changes to a loading screen and after about 2 minutes it goes back to black screen - however, before it goes black, i get a few errors, like: bad target number, or passwd error mode (something like that). I've also tried (xforcevesa, i915.modeset=0, nomodeset, radeon.modeset=0, i915.modeset=1) I have also tried the alternate installation, which installed fine, however when I boot up, select it from "grub", it goes black. I did manage to install 10.04, however the screen resolution was 800x600 and I couldn't fix it to 16:9 (my resolution). I don't wanna use 10.04, because I would like the new one 11.10, and would like to use it. Any help would be GREATLY appreciated. Thank you

    Read the article

  • Bluetooth from the command line in 12.04?

    - by azzid
    I've been trying to pair up my bluetooth keyboard with my computer after reinstalling from a standard ubuntu 12.04 to a minimal install. In the minimal install I have no gui, so I've been trying to use the various command line tools available, but I can't figure out how the pairing is supposed to go. Pairing when I had a gui worked flawlessly. I've asked for help here: http://ubuntuforums.org/showthread.php?p=12234695 No one has replied but a lot of details of my situation is available there. How is one supposed to pair bluetooth devices from the command line?

    Read the article

  • Recovering a deleted partition

    - by Kishore
    I had a dual boot PC running Ubuntu 12.04 and Windows 7. About a month back, I deleted the Ubuntu partition via the disk management utility (I do not remember whether or not I formatted the partition after performing this action). I ran into some grub issues and used lilo to solve the issue. I followed the simple instructions described in this blog post. I now realize that there were some files in the Ubuntu installation that I need. Of course, I backed up the data, but not this folder apparently. Is there any way to get the data back? I tried following the process suggested on another post on askubuntu (suggesting the use of TestDisk), but was not able to even install TestDisk. The live USB I use is running Ubuntu 12.04 and it does not have a synaptic package manager. Installing from the terminal does not work because even after I type: sudo apt-get update sudo apt-get upgrade the command: sudo apt-get install testdisk fails to work.

    Read the article

  • Wine dependencies

    - by user206923
    Hello I am new here and I have been trying to install wine: $ sudo apt-get install wine1.7 Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wine1.7 : Depends: wine1.7-i386 (= 1.7.4-0ubuntu4) but it is not installable E: Unable to correct problems, you have held broken packages. what should i do ?

    Read the article

  • Ubuntu 12.10 webapps don't open correctly when using Chromium

    - by Alex
    I have just installed Ubuntu 12.10 completely fresh, the old version of Ubuntu was discarded or overwritten (or whatever you call it). I want to use the Ubuntu webapps with Chromium but I've had several problems. }The first problem is that Chromium won't ask me if I want to install a webapp if I go to a supported site (and I don't already have the webapp installed). The second problem is that when I install the webapp by visiting the site in Firefox, and then I try to open it in Chromium, Ubuntu will open a completely new Chromium icon and window in the Launcher, and the icon will be labeled "Untitled"; also there is no search bar in the new window, only the tab at the top. I've tried using several webapps with Firefox set as the default browser and they work as expected: once the webapp icon is clicked a Firefox window is opened on the Firefox launcher icon, and the window has 'new tab' button and search bar.

    Read the article

  • package update in ubuntu on vitual box

    - by Ayusman
    while following one of the tutorials I needed to install a curl package. Here are my system configuration: Virtualbox 4.1 on Windows 7 64 bit. I have installed ubuntu 12.04 on the virtual box. When I try the following: sudo apt-get install curl I see the following errors: [sudo] password for userMe: Reading package lists... Done Building dependency tree Reading state information... Done Package curl is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'curl' has no installation candidate userMe@userMe-ubuntu:~$ When I try the same on a direct installation of ubuntu on a laptop (not a virtual machine) there is no problem. I am assuming this may be because of network settings. Please note that my work PC is in a corporate network and uses auto proxy settings (using a .pac file) for internet access etc. Any help will be appreciated.

    Read the article

  • Gnome 3 Shell extensions not working on Ubuntu 12.4 [closed]

    - by user63960
    Possible Duplicate: Gnome Shell Extension Empty I just upgraded to Ubuntu 12.4 running on a Win 7 box via VBox and switched the user interface to Gnome 3 but have a problem. In Advanced Settings (gnome tweak), the Shell Extensions window has no listings and the Theme window shows a "caution" triangle next to the Shell theme drop box. I have re-installed the default extensions using the Noobs Lab posted instructions: sudo apt-get install shell-extensions3.4 sudo apt-get install gnome-shell-extensions The commands appear to complete without error. Symptoms are: Gnome 2 visual appearance and no window borders or controls. To close a window, I have to click the window indicator in the sys tray and select the close menu item. Any ideas?

    Read the article

  • StyleCop 4.7.33.0 has been released

    - by TATWORTH
    StyleCop 4.7.33.0 was released, today, 29/June at http://stylecop.codeplex.com/releases/view/79972This version is compatible with the Visual Studio 2012 RC (11.0.50522).Install order should be : VS2008VS2010VS2012 RCR#6.1.1 msi (for VS2010)R#7.0 (tested with daily build 7.0.70.189)StyleCop  This version is now compatible with R# 5.1 (5.1.3000.12), R# 6.0 (6.0.2202.688), R# 6.1 (6.1.37.86), R# 6.1.1 (6.1.1000.82) and R# 7.0 (7.0.70.189).Fixes for this release are:Updated docs for SA1103.Fix to not throw 1101 when is a nested interface. Added new tests.Fixes to install the ReSharper plugins back in the main directories for all users.Styling fixes.7291. Create indexer documentation better. Port fixes for 7289 and 7223 to 7.0.0 plugin.Fix for 7289. Create interface documentation better.Fix for 7223. Better text for inserted property text.Ensure WebSites and other folders containing aspx.cs files get analysed.Add re-analyse Project option to context menus (I asked for this one!)

    Read the article

  • problem in repairing software center

    - by REGZEN
    what should be done regarding this error(software center) - installArchives() failed: Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Extracting templates from packages: 90% Extracting templates from packages: 100% Preconfiguring packages ... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Extracting templates from packages: 90% Extracting templates from packages: 100% Preconfiguring packages ... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Extracting templates from packages: 90% Extracting templates from packages: 100% Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. this error is repeating whenever i am repairing software center. I'm having problems with my software center .. when i want to install some package that following message it appears "items cannot be installed or removed until the package catalog is repaired. do you want to repair it now?" after i click Repair, another window pops up, saying : "Package operation fails - The installation or removal of a software package failed" I click repair, and a few seconds later, it pops up again!!!! no matter how many times i click repair, nothing happens. Also .. I've Another Problem With Update Manager That Shows Me The Following Message: " the package system is broken. Check if you are using third party repositories. If so disable them, since they are a common source of problems. Furthermore run the following command in a Terminal: apt-get install -f" also, i tried sudo apt-get install -f i got this error... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Extracting templates from packages: 100% Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. E: Sub-process /usr/bin/dpkg returned an error code (2) Please provide a solution

    Read the article

  • Can Ubuntu be installed in a subdirectory of another Linux variant?

    - by Reid
    I have access to (but not root on) a compute server which is running a Linux distribution that is a few years old. I'd much prefer to use a current Debian-like flavor. Thus, I'm wondering if it is possible to install Ubuntu (or stock Debian) in one of my directories, and use the Ubuntu programs and libraries in preference to what comes with the server. I would need to access arbitrary parts of the server's filesystem, not just the parts under the Ubuntu install. I log in by SSH, so there's no desktop environment needed. But, I would like to be able to use X programs.

    Read the article

  • Getting older packages from ppa

    - by highsciguy
    Can I install an older version of a specific package from a ppa? Specifically, I want to get an older version of xserver-xorg-video-intel (and dependencies) from xorg-edgers ppa. The reason is that the older version seemed to work with my hardware. The present version seems to feature (I would like to found out if it is really the source) severe crashes as the present stable releases of this package do. I tried apt-get install pkg=version but didn't succeed. I am afraid that the packages in the cache are lost after apt-get clean I do not even know the precise version number of the previous version, assuming that it doesn't have to be exactly one less. The current version is xserver-xorg-video-intel-2.20.15 Alternatively: Is there a place, e.g. at launchpad, where I can manually download the previous version of the package?

    Read the article

  • new hard drive on Dell Adaptec 2610SA 6 port SATA RAID PCI card

    - by Ragnarok85
    I have a Dell Adaptec 2610SA 6 port SATA RAID PCI card with 3 hard drives on it and everything works fine. I plugged another hard drive to it and the system (Ubuntu 12.04, 64 bit) seems not to recognize it. Strange thing is that, as happened in the past, if I re-install the system, it recognizes the new hardware plugged to RAID card. Of course I don't want to re-install ubuntu each time I plug a new hard drive on my RAID card. Any idea? Thank you in advance

    Read the article

  • Is the Lenovo Ideapad Z570 fully compatible with 12.04?

    - by umpirsky
    I'm looking for some notebook that will run on Ubuntu perfectly. I like LENOVO IdeaPad Z570, but I'm not sure how it will perform on Ubuntu. I heard people are complaining about wireless problems. Here is full configuraion: Processor Intel Core i5 2430M 2.4GHz - 3.0GHz Chipset Intel HM65 Express Memory 4GB DDR3 1333MHz Graphics NVIDIA GeForce GT 520M 1GB HDD 750GB SATA II Wireless 802.11b/g/n, Bluetooth 2.1 Network adapter Ethernet LAN 10/100Mbps Ports VGA, HDMI, 3x USB 2.0, eSATA Does anyone have experience with this model? Any problems noted? I heard there is a test suite, how can I install it? Maybe I can boot live CD and try it myself before buying it. But, unfortunately, sometimes something works on live CD, but not when you install it. I guess critical components here are graphics and wireless. Any feedback would be appreciated.

    Read the article

  • Errors with linux-image-3.8.0-36-generic and GRUB

    - by user285239
    OS: Ubuntu 12.04 LTS Problem 1: When installing anything (or updating) it always ends with this error: Errors were encountered while processing: linux-image-3.8.0-36-generic linux-image-3.8.0-38-generic linux-image-generic-lts-raring linux-generic-lts-raring Problem 2: When installing or updating stuff it opens some grub files and halts execution until I close these grub files. See screenshot below. Grub files + terminal window (screenshot) Pastebin with terminal output while trying to install something I should mention that I don't known if these two errors are related, but it is a fact that every time I try to install something or run an update both of the above errors pop up. I couldn't find anything of interest in the logs I looked at (probably because I don't know what/where to look), but tell me if you need me to upload something. Edit 02 june. This is the output from lsb_release -a kasper@ubuntuRW:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.4 LTS Release: 12.04 Codename: precise

    Read the article

  • Dependency problem while missing package is already installed

    - by hakermania
    I am trying to install a program but I am getting a dependency error. The error clearly points out: Dependency is not satisfiable: libc6-amd64 (>= 2.14) I went on to investigate and I found out that I have 2.19 version installed, actually: alex@MaD-pc:~$ apt-cache policy libc6-amd64 libc6-amd64:i386: Installed: 2.19-0ubuntu6 Candidate: 2.19-0ubuntu6 Version table: *** 2.19-0ubuntu6 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty/main i386 Packages 100 /var/lib/dpkg/status Why am I getting this error if I already have this package? I also should probably mention that the system is 100% up to date. I run the updates and upgrades, restarted the system and then tried to install the package again with the same error popping up. Edit 1: I am using amd64 but I have installed some 32-bit libraries required by some program installed via wine if I recall correctly.

    Read the article

  • How to fix "Could not open lock file" because "Permission denied"?

    - by user66498
    Whenever trying to install any software and update manger, I get an error stating Package operation failed The installation or removal of a software package failed When I run sudo apt-get update I got this result: conan51xd@conan51xd-Lenovo-B470:~$ sudo apt-get -f install [sudo] password for conan51xd: Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. conan51xd@conan51xd-Lenovo-B470:~$ apt-get update E: Could not open lock file /var/lib/apt/lists/lock - open (13: Permission denied) E: Unable to lock directory /var/lib/apt/lists/ E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied) E: Unable to lock the administration directory (/var/lib/dpkg/), are you root?

    Read the article

  • dual boot, Sony Viao, all in one portable desktop, not working and crashes

    - by user287513
    I am a fan of Ubuntu but ever since I bought my new computers, both Sony Vaio, I can't get them running together with windows 8.1. When I try wubi, it doesn't show the install box, but some other information box. If I remove wubi from the iso and run it as admin on my desktop, it runs and installs but after rebooting, grub never comes up and it gives the error screen.. On my laptop, I had to make a usb install and partition everything myself and that worked for my laptop, for a little while. Windows boot loader would override and grub wouldn't come up no more, unless I try to boot from usb, with no usb in, and after it reboots because there is no usb, now grub opens, but doesn't cont. That is what happens with my Sony 2 in 1 laptop. My all in one portable just wont boot it period. Bios is the problem but I disabled everything that was necessary. Help

    Read the article

  • Ubuntu 12.10 update doesnt boot. (please help)

    - by Hugtrw
    my name is Anthony. I updated to 12.10 and it the OS will not load accept in "pae" under advanced options. I used the boot repair cd, the only thing that workds is the monodeset option in the kernel and the graphics are terrible, mouse disappears and unity will not boot. Ubuntu 12.04 Runs great, on a clean install of 12.10 Ubuntu 12.10 wont even load to install unless under monodeset. I get left a termial like screen with just a bilking bar. Im running a HP Compaq NC6400 Laptop, Ubuntu 32-bit, 2gb ram.

    Read the article

  • System Center 2012 Service Manager change request status stuck at new

    - by Chuck Herrington
    The guy that built and setup this system left rather abruptly and I've taken over. My current issues are I have several change requests that are stuck at New. They do not move to Pending or In Progress. The system is not sending emails when incidents are getting assigned to people. This used to work on this system. I have done a lot of searching and the usual solution to this of stopping and restarting the system center services does not help. Can anyone give me any ideas of where else to look? Update: From all the searching I have done it seemed like I was at the point of re-installing. My initial installation of SCSM 2012 was on a machine that was upgraded from SCSM 2010 and also hosted SCCM 2007 and WSUS. We decided to give it a fresh start on a new server by installing a second instance of the SCSM server on a brand new 2008 R2 server then promoting the new server to the workflow master using the procedures outlined in this article - Dealing with Multiple management Servers. I've gotten to the point where we have both the old and the new server up and the new server has been promoted. I had hopped to get spammed by emails all the sudden due to the workflow taking off, but no such luck. Once all the clients are reconfigured to point to the new server we still plan to decommission the old server but at this point it seems to be that the problem is in the database. Short of any other input from the community, my next plan is to install a 180 day trial on a test server, complete with a separate database so that I can do a side by side comparison between a completely fresh install and what I have now and see if I can find any differences. While that install is running I also plan on investigating the event logs to see if there is anything in there that can shed some light on what is happening on the new server. Update 2: So I've now got a test SCSM server up with a completely fresh install including Database and it seems to be able to transition Change Requests from New to In Progress. I'm attempting to find differences between the two. Stay Tuned! Update 3: In looking through the event log on the new SCSM machine i discovered: Log Name: Operations Manager Source: OpsMgr Root Connector Date: 10/9/2013 3:48:18 PM Event ID: 28000 Task Category: None Level: Warning Keywords: Classic User: N/A Computer: scsm02 Description: The Root connector received an exception from the SDK Service while submitting task status: Cannot set availability on a health service that doesn't exist. This lead me to Event ID 2800 logged after installing secondary server for System Center 2012 Service Manager SP1. I contacted MS to obtain the hotfix, BIG warning here, turns out the hotfix is not so "hot". In order to apply this hotfix, you have to uninstall then reinstall using the files they supply. :( This is where I am at now ... Update 4: Not much luck after the re-install. The errors in the event log have gone away on the new server but the workflows still aren't running and neither the event log nor the workflow status screen seem to indicate why. I've done a comparison of the Activity and the Change Request Event Workflows and I've removed everything from the production system that is not in my fresh test system (which is everything), shut down the services, cleared out the cache folders and restarted the services and still no joy. At the moment the only thing I can think to do is either a)nuke the entire system including the database and start over, losing all of our data in the process or b)contact MS (which is probably going to cost us a butt load of money and time in the end to only advise us to do the same thing. Maybe more idea's will come after coffee ... No answers came after coffee. Attempting to contact MS. Managed to get to their first line of defense, gave them our SA number and someone is supposed to call me back. I am trying to log into my incident on their site to update my ticket with the link to this thread but when i click on the link in the email they sent me it goes to a "Sorry, the page you requested is not available" page ... Linux is looking better and better all the time.

    Read the article

  • Skype installed or not installed, that is the question

    - by Merle
    After upgrading 11.10 to 12.04, I noticed that Skype 2.2.0.35 was no longer on the sidebar of icons. Found it in Dash and it runs but no sound. Figured I'd check Ubuntu Software Center and reinstall but it indicates a different version - 2.2.0.35-0precise3 - and indicates that Skype is not installed. Attempting to go ahead and install errors saying that it can't install when skype is already installed. sudo apt-get remove skype ...says "Package skype not installed" Tried to update apt-get but that didn't make any difference. Seems like it would be best to straighten this all out so it's right and, presumably, the newer version is probably better to have installed. Can anyone step me through how to do so?

    Read the article

  • What's wrong with lualatex?

    - by Hooked
    I'm not sure if this is a bug or I've done something wrong (or I simply don't know luatex well enough). This minimal example file test.tex \documentclass{article} \usepackage{luacode} \begin{document} A random number: \begin{luacode} tex.print(math.random()) \end{luacode} \end{document} Should compile with lualatex test.tex but fails with: ! LaTeX Error: File `luacode.sty' not found. It sounds like something was messed up in the installation of luatex. They look to be installed: > dpkg --get-selections | grep luatex luatex install texlive-luatex install The file exists on my system: > locate luacode.sty /usr/local/texlive/2011/texmf-dist/tex/lualatex/luacode/luacode.sty so I'm not how to troubleshoot this. Is the package messed up or is it a problem on my end?

    Read the article

  • Blackscreen while installing 12.10

    - by Nalelvon
    everytime I try to install ubuntu 12.10 on my laptop i get a blackscreen after clicking on "install ubuntu", "try ubuntu without installation" or "ubuntu live" i tried it with nomodeset, nolapic and acpi=off too but nothing works. Sometimes i even get so a loading screen with nothing but "Ubuntu 12.10" and 4 dots in the middle, after that shortly a blackscreen appears with some text on it and then the complete blackscreen appears. As i tried with "no splash" instead of "quiet splash" it shows me something with graphic and determined in it but it was to fast away in a blackscreen to remember. Has someone any idea what I can do to get this working? Sry for my bad english i'm actually from germany. Sincerely Nalelvon

    Read the article

  • How To Remove Authorized PCs from Your Windows Store Account

    - by Taylor Gibb
    One of the awesome things about the Windows Store is you are allowed to install any app you purchase on up to 5 Windows machines. This means that the PC you install the app on gets added to your Trusted PC list. Here’s how to clean up that list. Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows

    Read the article

  • How to create browser based software?

    - by erkant
    I have recently used some software, which come as a regular setup file, where you install your software, and then when you run it, opens the browser, uses the localhost with some specific port number to connect to the software, and runs it from there. I find it quite useful and interesting. But I even don't know whether this kind of software and programming methodology have a name or not. Therefore, I would like to learn which programming languages, APIs, and frameworks are specifically designed for this purpose? One example to this is Metasploit. You can download its setup file, and install it casually like any other software, then when everything finishes, and you want to use the software. It will open the browser and connect to, http://localhost:3790/ where Metasploit will load and start.

    Read the article

< Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >