Search Results

Search found 9963 results on 399 pages for 'special commands'.

Page 346/399 | < Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >

• How do I efficiently parse a CSV file in Perl?

  - by Mike

  I'm working on a project that involves parsing a large csv formatted file in Perl and am looking to make things more efficient. My approach has been to split() the file by lines first, and then split() each line again by commas to get the fields. But this suboptimal since at least two passes on the data are required. (once to split by lines, then once again for each line). This is a very large file, so cutting processing in half would be a significant improvement to the entire application. My question is, what is the most time efficient means of parsing a large CSV file using only built in tools? note: Each line has a varying number of tokens, so we can't just ignore lines and split by commas only. Also we can assume fields will contain only alphanumeric ascii data (no special characters or other tricks). Also, i don't want to get into parallel processing, although it might work effectively. edit It can only involve built-in tools that ship with Perl 5.8. For bureaucratic reasons, I cannot use any third party modules (even if hosted on cpan) another edit Let's assume that our solution is only allowed to deal with the file data once it is entirely loaded into memory. yet another edit I just grasped how stupid this question is. Sorry for wasting your time. Voting to close.

  Read the article

• How do I call Matlab in a script on Windows?

  - by Benjamin Oakes

  I'm working on a project that uses several languages: SQL for querying a database Perl/Ruby for quick-and-dirty processing of the data from the database and some other bookkeeping Matlab for matrix-oriented computations Various statistics languages (SAS/R/SPSS) for processing the Matlab output Each language fits its niche well and we already have a fair amount of code in each. Right now, there's a lot of manual work to run all these steps that would be much better scripted. I've already done this on Linux, and it works relatively well. On Linux: matlab -nosplash -nodesktop -r "command" or echo "command" | matlab -nosplash -nodesktop ...opens Matlab in a "command line" mode. (That is, no windows are created -- it just reads from STDIN, executes, and outputs to STDOUT/STDERR.) My problem is that on Windows (XP and 7), this same code opens up a window and doesn't read from / write to the command line. It just stares me blankly in the face, totally ignoring STDIN and STDOUT. How can I script running Matlab commands on Windows? I basically want something that will do: ruby database_query.rb perl legacy_code.pl ruby other_stuff.rb matlab processing_step_1.m matlab processing_step_2.m # etc, etc. I've found out that Matlab has an -automation flag on Windows to start an "automation server". That sounds like overkill for my purposes, and I'd like something that works on both platforms. What options do I have for automating Matlab in this workflow?

  Read the article

• help me to choose between two designs

  - by alex

  // stupid title, but I could not think anything smarter I have a code (see below, sorry for long code but it's very-very simple): namespace Option1 { class AuxClass1 { string _field1; public string Field1 { get { return _field1; } set { _field1 = value; } } // another fields. maybe many fields maybe several properties public void Method1() { // some action } public void Method2() { // some action 2 } } class MainClass { AuxClass1 _auxClass; public AuxClass1 AuxClass { get { return _auxClass; } set { _auxClass = value; } } public MainClass() { _auxClass = new AuxClass1(); } } } namespace Option2 { class AuxClass1 { string _field1; public string Field1 { get { return _field1; } set { _field1 = value; } } // another fields. maybe many fields maybe several properties public void Method1() { // some action } public void Method2() { // some action 2 } } class MainClass { AuxClass1 _auxClass; public string Field1 { get { return _auxClass.Field1; } set { _auxClass.Field1 = value; } } public void Method1() { _auxClass.Method1(); } public void Method2() { _auxClass.Method2(); } public MainClass() { _auxClass = new AuxClass1(); } } } class Program { static void Main(string[] args) { // Option1 Option1.MainClass mainClass1 = new Option1.MainClass(); mainClass1.AuxClass.Field1 = "string1"; mainClass1.AuxClass.Method1(); mainClass1.AuxClass.Method2(); // Option2 Option2.MainClass mainClass2 = new Option2.MainClass(); mainClass2.Field1 = "string2"; mainClass2.Method1(); mainClass2.Method2(); Console.ReadKey(); } } What option (option1 or option2) do you prefer ? In which cases should I use option1 or option2 ? Is there any special name for option1 or option2 (composition, aggregation) ?

  Read the article

• Best approach to cache Counts from SQL tables ?

  - by pixel3cs

  I would like to develop a Forum from scratch, with special needs and customization. I would like to prepare my forum for intensive usage and wondering how to cache things like User posts count and User replies count. Having only three tables, tblForum, tblForumTopics, tblForumReplies, what is the best approach of cache the User topics and replies counts ? Think at a simple scenario: user press a link and open the Replies.aspx?id=x&page=y page, and start reading replies. On the HTTP Request, the server will run an SQL command wich will fetch all replies for that page, also "inner joining with tblForumReplies to find out the number of User replies for each user that replied." select tblForumReplies.*, tblFR.TotalReplies from tblForumReplies inner join ( select IdRepliedBy, count(*) as TotalReplies from tblForumReplies group by IdRepliedBy ) as tblFR on tblFR.IdRepliedBy = tblForumReplies.IdRepliedBy Unfortunately this approach is very cpu intensive, and I would like to see your ideas of how to cache things like table Counts. If counting replies for each user on insert/delete, and store it in a separate field, how to syncronize with manual data changing. Suppose I will manually delete Replies from SQL.

  Read the article

• stdio data from write not making it into a file

  - by user1551209

  I'm having a problem with using stdio commands for manipulating data in a file. I short, when I write data into a file, write returns an int indicating that it was successful, but when I read it back out I only get the old data. Here's a stripped down version of the code: fd = open(filename,O_RDWR|O_APPEND); struct dE *cDE = malloc(sizeof(struct dE)); //Read present data printf("\nreading values at %d\n",off); printf("SeekStatus <%d>\n",lseek(fd,off,SEEK_SET)); printf("ReadStatus <%d>\n",read(fd,cDE,deSize)); printf("current Key/Data <%d/%s>\n",cDE->key,cDE->data); printf("\nwriting new values\n"); //Change the values locally cDE->key = //something new cDE->data = //something new //Write them back printf("SeekStatus <%d>\n",lseek(fd,off,SEEK_SET)); printf("WriteStatus <%d>\n",write(fd,cDE,deSize)); //Re-read to make sure that it got written back printf("\nre-reading values at %d\n",off); printf("SeekStatus <%d>\n",lseek(fd,off,SEEK_SET)); printf("ReadStatus <%d>\n",read(fd,cDE,deSize)); printf("current Key/Data <%d/%s>\n",cDE->key,cDE->data); Furthermore, here's the dE struct in case you're wondering: struct dE { int key; char data[DataSize]; }; This prints: reading values at 1072 SeekStatus <1072> ReadStatus <32> current Key/Data <27/old> writing new values SeekStatus <1072> WriteStatus <32> re-reading values at 1072 SeekStatus <1072> ReadStatus <32> current Key/Data <27/old>

  Read the article

• wxPython: MainLoop() seems to hang

  - by BandGap

  Hi all, my problem stems from the use of wxApp as far as I can tell. Inside a litte subroutine I call a wx.MessageDialog to ask for a yes or no. I retrieve the answer an process some stuff acordingly. My example code below actually works (though it might be ugly) except that the Dialog box stays open after hitting one of the buttons... import wx from os import path def HasFile(filename): if path.isfile(filename ): app = wx.App() dial = wx.MessageDialog(None, 'Die Datei "'+filename+'" wurde gefunden.\nSoll sie eingelesen werden?', 'Bitte antworten', wx.YES_NO | wx.YES_DEFAULT | wx.ICON_QUESTION) result = dial.ShowModal() dial.EndModal(retCode=0) dial.Destroy() app.MainLoop() return result == wx.ID_YES else: return False So while the rest of the program does whatever is expected, the box just sits there. It also seems like my calls to matplotlib later on are producing errors (a Tkinter error to be precise), maybe because of the wx stuff? Edit: I tried to end the app with a call to app.Destroy(). This doesn't change the fact that the box is still there. When I issue a app.IsActive() afterwards the whole program exits (almost like a sys.exit())! How come? Edit 2: Adding a wxApp like this isn't a good idea since the other scripts get affected as well. Subsequent plotting commands don't get displayed and I don't know how to fix this. Thus I decided to remove the DialogBox alltogether.

  Read the article

• How to use .htaccess to redirect to an url that includes a query parameter

  - by wbervoets

  Hi guys, I've been struggling with a redirect where the final URL includes a query parameter that is an URL. It seems htaccess is escaping some characters. Here is my htaccess: Code: RewriteRule ^mypath http s://www.otherserver.com/cookie?param1=123&redirectto=http://otherserver2.com/&param2=1 [L,R=302] First, if I put Code: http s://www.otherserver.com/cookie?param1=123&redirectto=http://otherserver2.com/&param2=1 in my browser address bar, www.otherserver.com will do its thing and then redirect to otherserver2 (including the &param2=1 which is a parameter of that URL and not of the URL otherserver.com) That's the behaviour I need :-) Now when I try to use the htaccess redirect from my site: http://mysite/mypath; the behaviour is not the same then putting the same URL in the browser address bar; it now tries to redirect to http ://otherserver2.com/ (no param2=1 anymore). (ps: otherserver1 and otherserver2 are not under my control.) I've tried escaping the redirectto parameter in my htaccess, like below, but it didn't work either: Code: http s://www.otherserver.com/cookie?param1=123&redirectto=http%3a%2f%otherserver2.com%2f%3fparam2%3d1 Because then my browser tries to go to httpotherserver.com (all special characters are gone) In the end I would like to see http ://mysite/mypath to show the contents of Code: http s://www.otherserver.com/cookie?param1=123&redirectto=http://otherserver2.com/&param2=1 (preferred solution) or do a redirect to that URL. I hope my message is not to confusing, I hope someone can help me out; as I've already spent hours on this :-)

  Read the article

• Why the databinding fails in ListView (WPF) ?

  - by Ashish Ashu

  I have a ListView of which ItemSource is set to my Custom Collection. I have defined a GridView CellTemplate that contains a combo box as below : <ListView MaxWidth="850" Grid.Row="1" SelectedItem="{Binding Path = SelectedCondition}" ItemsSource="{Binding Path = Conditions}" FontWeight="Normal" FontSize="11" Name="listview"> <ListView.View> <GridView> <GridViewColumn Width="175" Header="Type"> <GridViewColumn.CellTemplate> <DataTemplate> <ComboBox Style="{x:Null}" x:Name="TypeCmbox" Height="Auto" Width="150" SelectedValuePath="Key" DisplayMemberPath="Value" SelectedItem="{Binding Path = MyType}" ItemsSource="{Binding Path = MyTypes}" HorizontalAlignment="Center" /> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> </ListView> My Custom collection is the ObservableCollection. I have a two buttons - Move Up and Move Down on top of the listview control . When user clicks on the Move Up or Move Down button I call MoveUp and MoveDown methods of Observable Collection. But when I Move Up and Move Down the rows then the Selected Index of a combo box is -1. I have ensured that selectedItem is not equal to null when performing Move Up and Move Down commands. Please Help!!

  Read the article

• Fixing an SQL where statement that is ugly and confusing

  - by Mike Wills

  I am directly querying the back-end MS SQL Server for a software package. The key field (vehicle number) is defined as alpha though we are entering numeric value in the field. There is only one exception to this, we place an "R" before the number when the vehicle is being retired (which means we sold it or the vehicle is junked). Assuming the users do this right, we should not run into a problem using this method. (Right or wrong isn't the issue here) Fast forward to now. I am trying to query a subset of these vehicle numbers (800 - 899) for some special processing. By doing a range of '800' to '899' we also get 80, 81, etc. If I cast the vehicle number into an INT, I should be able to get the right range. Except that these "R" vehicles are kicking me in the butt now. I have tried where vehicleId not like 'R%' and cast(vehicleId as int) between 800 and 899 however, I get a casting error on one of these "R" vehicles. What does work is where vehicleId not between '800' and '899' and cast(vehicleId as int) between 800 and 899', but I feel there has to be a better way and less confusing way. I have also tried other variations with HAVING and a sub-query all producing a casting error.

  Read the article

• Running a process at the Windows 7 Welcome Screen

  - by peelman

  So here's the scoop: I wrote a tiny C# app a while back that displays the hostname, ip address, imaged date, thaw status (we use DeepFreeze), current domain, and the current date/time, to display on the welcome screen of our Windows 7 lab machines. This was to replace our previous information block, which was set statically at startup and actually embedded text into the background, with something a little more dynamic and functional. The app uses a Timer to update the ip address, deepfreeze status, and clock every second, and it checks to see if a user has logged in and kills itself when it detects such a condition. If we just run it, via our startup script (set via group policy), it holds the script open and the machine never makes it to the login prompt. If we use something like the start or cmd commands to start it off under a separate shell/process, it runs until the startup script finishes, at which point Windows seems to clean up any and all child processes of the script. We're currently able to bypass that using psexec -s -d -i -x to fire it off, which lets it persist after the startup script is completed, but can be incredibly slow, adding anywhere between 5 seconds and over a minute to our startup time. We have experimented with using another C# app to start the process, via the Process class, using WMI Calls (Win32_Process and Win32_ProcessStartup) with various startup flags, etc, but all end with the same result of the script finishing and the info block process getting killed. I tinkered with rewriting the app as a service, but services were never designed to interact with the desktop, let alone the login window, and getting things operating in the right context never really seemed to work out. So for the question: Does anybody have a good way to accomplish this? Launch a task so that it would be independent of the startup script and run on top of the welcome screen?

  Read the article

• How to configure ldap login with php

  - by Drew G

  I'm attempting to implement a login that works with ldap, My extension=php_ldap.dll is uncommented in both of my php config files, ldap shows up in my phpinfo() I have access to AD and I've been using dsquery to snoop around. So I believe I'm very close to achieving my goal function authenticate($user, $password) { $ldap_host = "na.ad.mycompanyname.com"; $ldap_dn = "CN=USA-USERS,DC=ad,DC=mycompanyname,DC=com"; $ldap_user_group = "Domain Users"; $ldap_manager_group = "Domain Admins"; $ldap_usr_dom = "@na.ad.mycompany.com"; So for now when I enter my login credentials, it fails and I get the appropriate error, my question is, what information do I need to enter and which dsquery commands should I use? Without being spoonfed, could someone point me in the right direction? I've done some extensive research, but nothing I could find really assists with figuring out which CN's and OU's to use. Yes I realize I need to be using the correct CN's and OU's that correspond to my location, but I've been trying the guess and check method to no avail, so I figured I would ask. Any assistance is appreciated. THANKS!!!

  Read the article

• How to **delete-protect** a file or folder on Windows Server 2003 and onwards using C#/Vb.Net?

  - by Steve Johnson

  Hi all, Is it possible to delete-protect a file/folder using Registry or using a custom written Windows Service in C#? Using Folder Permissions it is possible, but i am looking for a solution that even restricts the admin from deleting specific folders. The requirement is that the administrator must not be easily track the nature of protection and/or may not be able to avert it easily. Obviously all administrators will be able to revert the procedure if the technique is clearly understood. Like folder Permissions/OwnerShip Settings can easily be reset by an administrator. SO that is not an option. Folder protection software can easily be uninstalled and show clear indication that a particular folder is protected by some special kind of software. SO that too is not an option. Most antivirus programs protect folders and files in Program Dir. Windows itself doesnt allow certain files such as registry files in c:\windows\system32\config to not even copied. Such a protection is desired for folders which allowse to read and write to files but not allow deletion. Similar functionality is desired. The protection has to seemless and invisible. I do not want to use any protection features like FolderLock and Invisible secrets/PC Security and Desktop password etc. Moreover, the solution has to be something other than folder encryption. The solution has to be OS-native so ** that it may implemented ** pro grammatically using C#/VB.Net. Please help. Thanks

  Read the article

• How often should network traffic/collisions cause SNMP Sets to fail?

  - by A. Levy

  My team has a situation where an SNMP SET will fail once every two weeks or so. Since this set happens automatically, we don't necessarily notice it immediately when it fails, and this can result in an inconsistent configuration and associated wailing and gnashing of teeth. The plan is to fix this by having our software automatically retry the SET when it fails. The problem is, we aren't sure why the failure is happening. My (extremely limited) knowledge of SNMP isn't particularly helpful in diagnosing this problem, so I thought I'd ask StackOverflow for some advice. We think that every so often a spike in network traffic will cause the SET to fail. Since SNMP uses UDP for communication, I would think it would be relatively easy for a command to be drowned out if traffic was high for a short period of time. However, I have no idea how common this is. We have a small network with a single cisco router and there are less than a dozen SNMP controlled devices on that network. In addition to the SNMP traffic, there are some status web pages being loaded from the various devices. In case it makes a difference, I believe we are using the AdventNet SNMP API version 4.0.4 for Java. Does it sound reasonable that there will be some SET commands dropped occasionally, or should we be looking for other causes?

  Read the article

• Why "Content-Length: 0" in POST requests?

  - by stesch

  A customer sometimes sends POST requests with Content-Length: 0 when submitting a form (10 to over 40 fields). We tested it with different browsers and from different locations but couldn't reproduce the error. The customer is using Internet Explorer 7 and a proxy. We asked them to let their system administrator see into the problem from their side. Running some tests without the proxy, etc.. In the meantime (half a year later and still no answer) I'm curious if somebody else knows of similar problems with a Content-Length: 0 request. Maybe from inside some Windows network with a special proxy for big companies. Is there a known problem with Internet Explorer 7? With a proxy system? The Windows network itself? Google only showed something in the context of NTLM (and such) authentication, but we aren't using this in the web application. Maybe it's in the way the proxy operates in the customer's network with Windows logins? (I'm no Windows expert. Just guessing.) I have no further information about the infrastructure.

  Read the article

• Porting Perl to C++ `print "\x{2501}" x 12;`

  - by jippie

  I am porting a program from Perl to C++ as a learning objective. I arrived at a routine that draws a table with commands like the following: Perl: print "\x{2501}" x 12; And it draws 12 times a '?' ("box drawings heavy horizontal"). Now I figured out part of the problem already: Perl: \x{}, \x00 Hexadecimal escape sequence; C++: \unnnn To print a single Unicode character: C++: printf( "\u250f\n" ); But does C++ have a smart equivalent for the 'x' operator or would it come down to a for loop? UPDATE Let me include the full source code I am trying to compile with the proposed solution. The compiler does throw an errors: g++ -Wall -Werror project.cpp -o project project.cpp: In function ‘int main(int, char**)’: project.cpp:38:3: error: ‘string’ is not a member of ‘std’ project.cpp:38:15: error: expected ‘;’ before ‘s’ project.cpp:39:3: error: ‘cout’ is not a member of ‘std’ project.cpp:39:16: error: ‘s’ was not declared in this scope #include <stdlib.h> #include <stdint.h> #include <stdio.h> #include <string.h> int main ( int argc, char *argv[] ) { if ( argc != 2 ) { fprintf( stderr , "usage: %s matrix\n", argv[0] ); exit( 2 ); } else { //std::string s(12, "\u250f" ); std::string s(12, "u" ); std::cout << s; } }

  Read the article

• Stopping process in /etc/inittab kills spawned process. Doesn't happen in rc.local.

  - by Paul

  Hi, I'm trying to execute a firmware upgrade while my programming is running in inittab. My program will run 2 commands. One to extract the installer script from the tarball and the other to execute the installer script. In my code I'm using the system() function call. These are the 2 command strings below, system ( "tar zvxf tarball.tar.gz -C / installer.sh 2>&1" ); system( "nohup installer.sh tarball >/dev/null 2>&1 &" ); The installer script requires the tarball to be an argument. I've tried using sudo but i still have the same problem. I've tried nohup with no success. The installer script has to kill my program when doing the firmware upgrade but the installer script will stay alive. If my program is run from the command line or rc.local, on my target device, my upgrade works fine, i.e. when my program is killed my installer script continues. But I need to run my program from /etc/inittab so it can respawn if it dies. To stop my program in inittab the installer script will hash it out and execute "telinit q". This is where my program dies (but thats what I want it to do), but it also kills my installer script. Does anyone know why this is happening and what can I do to solve it? Thanks in advance.

  Read the article

• How can I filter then modify e-mails using IMAP?

  - by swolff1978

  I have asked this question in a different post here on SO: How can a read receipt be suppressed? I have been doing some research of my own to try and solve this problem and accessing the e-mail account via IMAP seems like it is going to be a good solution. I have successfully been able to access my own Inbox and mark messages as read with no issue. I have been asked to preform the same task on an Inbox that contains over 23,000 emails. I would like to run the test on a small amount of e-mails from that inbox before letting the whole 23,000 get it. Here is the code I have been running via telnet: . LOGIN [email protected] password . SELECT Inbox . STORE 1:* flags \Seen 'this line marks all the e-mails as read So my question is how can i execute that store command on a specific group of e-mails... say emails that are going to / coming from a specific account? Is there a way to like concatenate the commands? like a FETCH then the STORE? Or is there a better way to go about getting a collection of e-mails based on certain criteria and then modifying ONLY those e-mails that can be accomplished through IMAP?

  Read the article

• How can I automate new system provisioning with scripts under Mac OS X 10.6?

  - by deeviate

  I've been working on this for days but simply cannot find the correct references to make it work. The idea is to have a script that will baseline newly purchased Macs that comes into the company with basic stuffs like set autologin to off, create a new admin user (for remote admins to access for support, set password to unlock screensaver and etc) . Sample list for baseline that admins have to do on each new machine: Click the Login Options button Set Automatic Login: OFF Check: Show the Restart, Sleep, and Shutdown buttons Uncheck: Show input menu in login window Uncheck: Show password hints Uncheck: Use voice over in the login window Check: Show fast user switching menu as Short Name (note: this is only part of a long list to do on each machine) I've managed to find some references to make some parts work. Like autologin can be unset with: defaults write /Library/Preferences/.GlobalPreferences com.apple.userspref.DisableAutoLogin -bool TRUE and I've kinda found ways to muscle in a new user creation (including prompts) with AppleScript and shell commands. But generally its tough finding ways to do somewhat simple things like turn on password to get out of screensaver or to allow fast user switching. References are either too limited or just no where to be seen (e.g. I can unset autologin via cli but the very next setting on the system preference "show restart, sleep and shutdown buttons" is somewhere else and I can't find any command line to make it set) Does anyone have any ideas on a list, document, reference or anything of where each setting on the system resides so that I can be pointed to make it work? or maybe sample scripts for the above example... My thanks for reading thus far—a huge thank you for whoever that has any info on the above.

  Read the article

• UpdateModelFromDatabaseException when trying to add a table to Entity Framework model

  - by Agent_9191

  I'm running into a weird issue with Entity Framework in .NET 3.5 SP1 within Visual Studio 2008. I created a database with a few tables in SQL Server and then created the associated .edmx Entity Framework model and had no issues. I then created a new table in the database that has a foreign key to an existing table and needed to be added to the .edmx. So I opened the .edmx in Visual Studio and in the models right-clicked and chose "Update Model From Database...". I saw the new table in the "add" tab, so I checked it and clicked finish. However I get an error message with the following text: --------------------------- Microsoft Visual Studio --------------------------- An exception of type 'Microsoft.Data.Entity.Design.Model.Commands.UpdateModelFromDatabaseException' occurred while attempting to update from the database. The exception message is: 'Cannot update from the database. Cannot resolve the Name Target for ScalarProperty 'ID <==> CustomerID'.'. --------------------------- OK --------------------------- For reference, here's the tables seem to be the most pertinent to the error. CustomerPreferences already exists in the .edmx. Diets is the table that was added afterwards and trying to add to the .edmx. CREATE TABLE [dbo].[CustomerPreferences]( [ID] [uniqueidentifier] NOT NULL, [LastUpdatedTime] [datetime] NOT NULL, [LastUpdatedBy] [uniqueidentifier] NOT NULL, PRIMARY KEY CLUSTERED ( [ID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] CREATE TABLE [dbo].[Diets]( [ID] [uniqueidentifier] NOT NULL, [CustomerID] [uniqueidentifier] NOT NULL, [Description] [nvarchar](50) NOT NULL, [LastUpdatedTime] [datetime] NOT NULL, [LastUpdatedBy] [uniqueidentifier] NOT NULL, PRIMARY KEY CLUSTERED ( [ID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] GO ALTER TABLE [dbo].[Diets] WITH CHECK ADD CONSTRAINT [FK_Diets_CustomerPreferences] FOREIGN KEY([CustomerID]) REFERENCES [dbo].[CustomerPreferences] ([ID]) GO ALTER TABLE [dbo].[Diets] CHECK CONSTRAINT [FK_Diets_CustomerPreferences] GO This seems like a fairly common use case, so I'm not sure where I'm going wrong.

  Read the article

• Sys. engineer has decided to dynamically transform all XSLs into DLLs on website build process. DLL

  - by John Sullivan

  Hello, OS: Win XP. Here is my situation. I have a browser based application. It is "wrapped" in a Visual Basic application. Our "Systems Engineer Senior" has decided to spawn DLL files from all of our XSL pages (many of which have duplicate names) upon building a new instance of the website and have the active server pages (ASPX) use the DLL instead. This has created a "known issue" in which ~200 DLL naming conflicts occur and, thus, half of our application is broken. I think a solution to this problem is that, thankfully, we're generating the names of the DLLs and linking them up with our application dynamically. Therefore we can do something kludgy like generate a hash and append it to the end of the DLL file name when we build our website, then always reference the DLL that had some kind of random string / hash appended to its name. Aside from outright renaming the DLLs, is there another way to have multiple DLLs with the same name register for one application? I think the answer is "No, only between different applications using a special technique." Please confirm. Another question I have on my mind is whether this whole idea is a good practice -- converting our XSL pages (which we use in mass -- every time a response from our web app occurs) into DLL functions that call a "function" to do what the XSL page did via an active server page (ASPX), when we were before just sending an XML response to an XSL page via aspx.

  Read the article

• HTML form never calls Javascript

  - by user1205577

  I have a set of radio buttons defined in HTML like so: <input type="radio" name="group" id="rad1" value="rad1" onClick="doStuff(this.id)">Option 1<br> <input type="radio" name="group" id="rad2" value="rad2" onClick="doStuff(this.id)">Option 2<br> Just before the </body> tag, I have the following JavaScript behavior defined: <script type="text/javascript"> /*<![CDATA[*/ function doStuff(var id){ alert("Doing stuff!"); } /*]]>*/ </script> When I run the program, the page loads as expected in my browser window and the radio buttons allow me to click them. The doStuff() function, however, is never called (I validated this using breakpoints as well). I also tried the following just to see if inline made the difference, but it seems the JavaScript is never called at all: <script type="text/javascript"> /*<![CDATA[*/ alert("JavaScript called!"); main(); function main(){ var group = document.getElementsByName('group'); for(var i=0; i<group.length; i++){ group[i].onclick = function(){ doStuff(this.id); }; } } /*]]>*/ </script> My question is, is there something special I need to do using HTML and JavaScript in this context? My question is not whether I should be using inline function calls or whether this is your favorite way to write code.

  Read the article

• How to use a divider in a navigation with list elements?

  - by Kris

  I want to create a navigation which got divider between each list element. Here is a simple HTML/CSS Code/Template : <nav> <ul> <li><a href="#">A</a></li> <li><a href="#">B</a></li> <li><a href="#">C</a></li> <li><a href="#">D</a></li> <li><a href="#">E</a></li> </ul> </nav> nav ul { list-style:none; float:right; } nav ul li { float:left; padding-left:10px; } nav ul li a { color:#111; font-family:Verdana; font-size:15px; text-decoration:none; } nav ul li a:hover { color:#9F3039; } so just a simple looking navigation which floats from the right side on a logo which is not displayed in the code here. Now I want to at devider between each link - I know I could do it with border-right and just use another class on my last listelement which set the border-right off, BUT I want to use a special kind of divider - an image. How can I do it best ?

  Read the article

• Starting a process synchronously, and "streaming" the output

  - by Benjol

  I'm looking at trying to start a process from F#, wait till it's finished, but also read it's output progressively. Is this the right/best way to do it? (In my case I'm trying to execute git commands, but that is tangential to the question) let gitexecute (logger:string->unit) cmd = let procStartInfo = new ProcessStartInfo(@"C:\Program Files\Git\bin\git.exe", cmd) // Redirect to the Process.StandardOutput StreamReader. procStartInfo.RedirectStandardOutput <- true procStartInfo.UseShellExecute <- false; // Do not create the black window. procStartInfo.CreateNoWindow <- true; // Create a process, assign its ProcessStartInfo and start it let proc = new Process(); proc.StartInfo <- procStartInfo; proc.Start() |> ignore // Get the output into a string while not proc.StandardOutput.EndOfStream do proc.StandardOutput.ReadLine() |> logger What I don't understand is how the proc.Start() can return a boolean and also be asynchronous enough for me to get the output out of the while progressively. Unfortunately, I don't currently have a large enough repository - or slow enough machine, to be able to tell what order things are happening in...

  Read the article

• Refactoring. Your way to reduce code complexity of big class with big methods

  - by Andrew Florko

  I have a legacy class that is rahter complex to maintain: class OldClass { method1(arg1, arg2) { ... 200 lines of code ... } method2(arg1) { ... 200 lines of code ... } ... method20(arg1, arg2, arg3) { ... 200 lines of code ... } } methods are huge, unstructured and repetitive (developer loved copy/paste aprroach). I want to split each method into 3-5 small functions, whith one pulic method and several helpers. What will you suggest? Several ideas come to my mind: Add several private helper methods to each method and join them in #region (straight-forward refactoring) Use Command pattern (one command class per OldClass method in a separate file). Create helper static class per method with one public method & several private helper methods. OldClass methods delegate implementation to appropriate static class (very similiar to commands). ? Thank you in advance!

  Read the article

• C Map String to Function

  - by Scriptonaut

  So, I'm making a Unix minishell, and have come to a roadblock. I need to be able to execute built-in functions, so I made a function: int exec_if_built_in(char **args) It takes an array of strings(the first being the command, and the rest being arguments). For non built-in commands I simply use something like execvp, however I need to find a way to map the first string to a function. I was thinking of making two arrays, one of strings, and another with their corresponding function pointers. However, since many of these functions will be different(return and accept different things), this approach won't work. I also thought of making an array of structs with a name property and a function pointer property, however once again due to the varied nature of the functions I'll be using, this won't work. So, what's the best way to execute a function based on the input of a string? How do I map a string to a certain function? I'm not very familiar with function pointers so I may be missing something. Thank you guys for the help :)

  Read the article

< Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >