Search Results

Search found 22447 results on 898 pages for 'cpu load'.

Page 347/898 | < Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >

• During Vista Repair - No operating system is listed.

  - by Jack Marchetti

  After a Windows update, my brother's Gateway computer loads to the "Step 3 of 3: 0%" and reboots. Safe Mode does not work. I placed a Vista DVD in the drive, and re-booted. (Note, this is my Vista DVD, not the Recovery/System disc that would come with a computer. Gateway does not give you CD's anymore. I believe they store recovery on a partition, but that partition has been wiped out). I chose "Repair Your Computer" I get a dialog box, but no operating system is listed. I'm then prompted to "Load Drivers". What drivers am I supposed to be loading here and where from? I placed a CD in the drive to "load drivers" but I don't see my DVD drive listed. All I saw where X:/Sources along with several Removable Media slots that were empty. On another screen I tried Startup Repair, which didn't do anything. I attempted to use System Restore - but it doesn't detect the hard drive. I'm guessing that I'm missing some sort of SATA driver and that is why the hard disk is not being found. Any ideas on this?

  Read the article

• How can I debug solutions in Visual Studio 2010 from a network share?

  - by alastairs

  I've recently got a new Mac laptop and am running VS2010 in a Parallels virtual machine. It's mostly working out well for me, but I'm having some problems with debugging specific project types, related to the fact that the projects are being accessed via a network share. Test projects don't run because the test runner can't load the tests' DLL. Web projects fail to run in the Visual Studio mini web server, throwing the following exception: 'An error occurred loading a configuration file: Failed to start monitoring changes to path\to\web.config'. I've spent the evening trawling the web with little luck on this. After reading these two posts, I tried out the usual CasPol changes, but then found this post from one of the early VS2010 betas indicating that CasPol is no longer needed/supported in .NET 4.0 and VS2010. The network share is accessible via both a mapped drive and the UNC path. The virtual machine runs its applications under the administrator account, which appears to have all the necessary permissions on the network share to create, read, write and delete files and folders. I say "appears to have" as I can't view the Security Properties of the appropriate folder via Explorer: the Security tab just isn't present. Has anyone managed to successfully load and debug web and test projects from a network share in VS2010?

  Read the article

• Website memory problem

  - by Toktik

  I have CentOS 5 installed on my server. I'm in VPS server. I have site where I have constant online ~150. First look on site looks OK. But when I go through links, sometimes I receive Out of memory PHP error. It looks like this Fatal error: Out of memory (allocated 36962304) (tried to allocate 7680 bytes) in /home/host/public_html/sites/all/modules/cck/modules/fieldgroup/fieldgroup.install on line 100 And always, not allocated memory is very small. In average I have 30% CPU load, 25% RAM load. So I think here is not a physical memory problem. My PHP memory limit was set to 1500MB. My apache error log looks like this [Thu Sep 30 17:48:59 2010] [error] [client 91.204.190.5] Out of memory, referer: http://www.host.com/17402 [Thu Sep 30 17:48:59 2010] [error] [client 91.204.190.5] Premature end of script headers: index.php, referer: http://www.host.com/17402 [Thu Sep 30 17:48:59 2010] [error] [client 91.204.190.5] Out of memory, referer: http://www.host.com/17402 [Thu Sep 30 17:48:59 2010] [error] [client 91.204.190.5] Premature end of script headers: index.php, referer: http://www.host.com/17402 [Thu Sep 30 17:49:00 2010] [error] [client 91.204.190.5] File does not exist: /home/host/public_html/favicon.ico Past I have not met with this on my server and the problem appeared itself. Besides this I'm receiving some server errors on mail. cpsrvd failed @ Fri Sep 24 16:45:20 2010. A restart was attempted automagically. Service Check Method: [tcp connect] Failure Reason: Unable to connect to port 2086 Same for tailwatchd. Support tried, and can't help me...

  Read the article

• Uninstall php5 installed from source

  - by diegomichel

  I have tried to install php5 from source , and it worked... Then for some reason need to install the official packets, so i tried a make uninstall and for my surprise there is such make uninstall... so i tried delete all the installed files by hand. Then installed the official debian packages and it worked fine... till i need install sqlite module, which give me the following error: php --version PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/pdo_sqlite.so' - /usr/lib/php5/20090626/pdo_sqlite.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/sqlite.so' - /usr/lib/php5/20090626/sqlite.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 PHP 5.3.1-5 with Suhosin-Patch (cli) (built: Feb 22 2010 22:46:05) Copyright (c) 1997-2009 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies So i remember that manual install i did, and i think there is some old lib installed causing that problem, the bad thing is that there is not such make uninstall on the source code of php5... php-5.2.13 > make uninstall make: *** No rule to make target `uninstall'. Stop. I have tried reinstall and purge all php related packages via aptitude with not success. OS: Debian Squeeze. uname -a Linux desktop 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64 GNU/Linux Any idea how to fix that?

  Read the article

• Haproxy and CNAME

  - by user123354

  I want to create a simple load balancer for the two servers. The problem is with CNAME records, I think. Let's say I have two the same applications on AppFog.com. app1.aws.af.cm and app2.aws.af.cm Here is my haproxy.cfg file: global maxconn 2000 daemon defaults mode http clitimeout 60000 srvtimeout 30000 contimeout 4000 option httpclose listen http_proxy bind [myip]:80 mode http stats enable stats auth user:passwd stats uri /stats balance source option httpchk option forwardfor server host01 app1.aws.af.cm:80 maxconn 300 check server host02 app2.aws.af.cm:80 maxconn 300 check But this only resolving IP for domain app1.aws.af.cm and app2.aws.af.cm, which obviously doesn't work if I open this IP in web browser. The problem is that AppFog doesn't have public IP for application (same as OpenShift). How to do that Haproxy to perform a proper connection between Load Balancer and this two servers? Example: This is real app - http://freechat.eu01.aws.af.cm Haproxy only resolves IP for this domain which is 46.51.204.8:80 Of course this IP will not show my application, only an error page. Sorry for my poor English.

  Read the article

• Prevent master to fall back to master after failure

  - by Chrille

  I'm using keepalived to setup a virtual ip that points to a master server. When a failover happens it should point the virtual ip to the backup, and the IP should stay there until I manually enable (fix) the master. The reason this is important is that I'm running mysql replication on the servers and writes should only be on the master. When I failover I promote the slave to master. The master server: global_defs { ! this is who emails will go to on alerts notification_email { [email protected] ! add a few more email addresses here if you would like } notification_email_from [email protected] ! I use the local machine to relay mail smtp_server 127.0.0.1 smtp_connect_timeout 30 ! each load balancer should have a different ID ! this will be used in SMTP alerts, so you should make ! each router easily identifiable lvs_id APP1 } vrrp_instance APP1 { interface eth0 state EQUAL virtual_router_id 61 priority 999 nopreempt virtual_ipaddress { 217.x.x.129 } smtp_alert } Backup server: global_defs { ! this is who emails will go to on alerts notification_email { [email protected] ! add a few more email addresses here if you would like } notification_email_from [email protected] ! I use the local machine to relay mail smtp_server 127.0.0.1 smtp_connect_timeout 30 ! each load balancer should have a different ID ! this will be used in SMTP alerts, so you should make ! each router easily identifiable lvs_id APP2 } vrrp_instance APP2 { interface eth0 state EQUAL virtual_router_id 61 priority 100 virtual_ipaddress { 217.xx.xx.129 } notify_master "/etc/keepalived/notify.sh del app2" notify_backup "/etc/keepalived/notify.sh add app2" notify_fault "/etc/keepalived/notify.sh add app2” smtp_alert }

  Read the article

• Nginx, HAproxy, Unicorn, Rails and Node settings

  - by Julien Genestoux

  Our application is currently only a "regular" web app, with no fancy things like streaming HTTP or websockets. It's mostly a Rails app, served by a few (20 on 2 machines) Unicorn workers, proxied by a venerable nginx server which deals with load balancing. This has been working quite well for the past year and the app now serves between 400 and 800 requests per second at any point during the day. We're soon releasing 2 new APIs, which are both served by a Node application : a websocket one, as well as a long polling HTTP one. (the fancy thing like the Twitter streaming API where HTTP connections never end). They both use the same port on node and since the node app is stateless, we can certainly deploy a few of them to handle the traffic. The app (node) is now deployed in 5 instances and are now listening on 5 different 'private' ports on the same host. We need to put something in front of them to load balance, but also something that is able to deal with sockets (either websocket or HTTP streaming) which are intended to stay 'up' for days. The question is then : what? I read somewhere that HAProxy does a better job than Nginx at this. What do you recommend?

  Read the article

• SBS 2003 boot stalls at acpitabl.dat

  - by John

  I have a SBS 2003 server running for 3 year without any problems, and few days ago it freezes during the boot. System is using two 500 Gb drives in RAID1 (Intel Matrix 7.5) After trying to load in safe mode, boot stops on acpitabl.dat. First idea was that there is a problem with RAID altough disk status was OK, and RAID status was Rebuild. I tried to boot with each drive, and one gives me the same problem, and the other drive is failing to load. Took both drives out, and checked it on a different machine. One drive is dead, other is without any problems. Returned the good drive back in SBS 2003 with changed status to Degraded, but the problem is still the same. I also have a clean SBS 2003 copy installed on this drive (previous installation), which loads smooth and quick. So, I believe the main problem is this installed version of SBS 2003. Did not make any hardware changes, did not make any updates (not sure about any automatic windows updates lately). Since there are tons posts about this problem, and no clear solution, I am trying to figure how to repair SBS 2003 installation, since there are some installed programs on this installation which I cannot re-install without additional issues.

  Read the article

• 502 Bad Gateway error after failed requests using Passenger

  - by Nicolas Buduroi

  I've got a staging server running nginx 1.0.5 using Rails 3.1 under Passenger 3.0.9. The problem is that a request sent just after one where there's an application error return 502 Bad Gateway. To test it I've set up a simple controller with an action that just raise a dummy exception. One request will show the Rails error message and the next one will show nginx 502 Bad Gateway error, then it goes back to the Rails application error, etc. While investigating this problem I've found out that load testing the application (which increase the number of application processes) make that issue disapear. That is until the extra processes are shutdown, then it reappear. I've tried setting the passenger_min_instances option, but doing so doesn't change anything and in this case each time an application error happen one instance is killed while after load testing all instances are kept alive. P.S.: Some people on my team told me that they've seen the 502 error even when there's no application error but I've not been able to reproduce that. Update: Just found out how to display the responses status codes using ab and most of them are 502!

  Read the article

• Is there a program to show programs loading during the boot process in real time?

  - by Gary M. Mugford

  Hi all, There are any number of programs that will show me WHAT will run during the boot process for Windows XP. I've always been partial to Mike Lin's version but there are several others, some of which are quite possibly superior. That's not the issue. What I'd really like is a program that would load first and then would list the programs that were about to load and then check them off as the programs loaded. This isn't something I necessarily need for myself. But certain family members get click happy as soon as they see the icon they eventually want to run and end up clicking on it. THIRTY TWO TIMES in one memorable crash-inducing spasm. If there was some way for 'progress' to be shown during the loading of from the various spots Windows auto-loads from, PLUS a BIG BANNER saying "Please do not move the mouse or click on anything until done.", I think I might cut down on my early morning family support calls significantly. I've tried a variety of searches, but I couldn't find the ones that show in real time in the forest of links to programs that will show the list after the fact. Any leads? If not, do any of you who write the after-the-fact listers want to take a shot at producing a utility to do what I think would be a relatively popular utility? Best of the season to all of you and yours. Thanks in advance for any replies, GM

  Read the article

• Bandwidth Suggestion

  - by Campo

  I have been asked to analyze the bandwidth usage of a company and make a recommendation for upgrading their Internet connection(s). Here is the layout 3 DLS lines so it is 3x(6 Down, 1 Up Each) into a load balancer out to the office's network. 30 VOIP phones run on a T1 (1.5 Down, 1.5 Up) The users at the company are heavily uploading. It is my suspicion that the issue in slowdown is being cause by multiple people uploading and others not being able to get requests out for even simple http requests. My initial idea is to get them a fiber line with a 10 down and 10 up. What do others think on this plan? Will that be enough to host their network traffic? What do I do about the VOIP line afterward? The fiber is expensive and I know the T1 does a great job for their VOIP so I do not want to suggest a DSL line because I know it may not be sufficient. I would also like to save them some money if I can. Maybe even get a faster fiber line and forgo the T1. Though I know their load balance/switch can only handle 20MB/S throughput. Looking for some confirmation/suggestions on my plan. I am planning on going in to get some real diagnostic numbers. Any suggestions on software to use for that? Preferably Windows software.

  Read the article

• Puppet - Is it possible to use a global var to pull in a template with the same name?

  - by Mike Purcell

  I'm new to puppet. As such I am trying to work my way around the best way to setup my manifests that make sense. Following the DRY (don't repeat yourself) principle, I am trying to load common directives in one template, then load in environment specific directives from a file matching the environment. Basically like this: # nodes.pp node base_dev { $service_env = 'dev' } node 'service1.ownij.lan' inherits base_dev { include global_env_specific } class global_env_specific { include shell::bash } # modules/shell/bash.pp class shell::bash inherits shell { notify{"Service env: ${service_env}": } file { '/etc/profile.d/custom_test.sh': content => template('_global/prefix.erb', 'shell/bash/global.erb', 'shell/bash/$service_env.erb'), mode => 644 } } But every time I run puppet agent --test puppet complains that it can't find the shell/bash/$service_env.erb file, but I double checked that it exists. I know the var is accessible due to the notify statement outputting the expected value, so I suspect I am doing which is not allowed. I know I could have a single template.erb and pass variables to the template, which would work in this case because the custom.sh file is small and not many changes across environments, but for more complex configs (httpd, solr, etc) I'd prefer to access environment specific files. I am also aware that I can specify environment specific module paths, but I'd prefer to just handle this behavior at the template level, instead of having several, closely named directories. Thanks.

  Read the article

• PC runs very slowly for no apparent reason

  - by GalacticCowboy

  I have a Dell Latitude D820 that I've owned for about 2.5 years. It is a Core 2 Duo T7200 2.0GHz, with 2 GB of RAM, an 80 GB hard drive and an NVidia Quadro 120M video card. The computer was purchased in late November of 2006 with XP Pro, and included a free upgrade to Vista Business. (Vista was available on MSDN but not yet via retail, so the Vista Business upgrades weren't shipped until March of '07.) Since we had an MSDN subscription at the time, I installed Vista Ultimate on it pretty much as soon as I got it. It ran happily until sometime in the spring of 2007 when Media Center (which I had never used except to watch DVDs) started throwing some kind of bizarre SQL (CE?) error. This error would pop up at random times just while using the computer. Furthermore, Media Center would no longer start. I never identified the cause of this error. I had the Vista Business upgrade by this time, so I nuked the machine, installed XP and all the drivers, and then the Vista Business upgrade. Again, it ran happily for a few months and then started behaving badly once again. Vista Business doesn't have Media Center, so this exhibited completely unrelated symptoms. For no apparent reason and at fairly random times, the machine would suddenly appear to freeze up or run very slowly. For example, launching a new application window (any app) might take 30-45 seconds to paint fully. However, Task Manager showed very low CPU load, memory, etc. I tried all the normal stuff (chkdsk, defrag, etc.) and ran several diagnostic programs to try to identify any problems, but none found anything. It eventually reached the point that the computer was all but unusable, so I nuked it again and installed XP. This time I decided to stick with XP instead of going to Vista. However, within the past couple of months it has started to exhibit the same symptoms in XP that I used to see in Vista. The computer is still under Dell warranty until December, but so far they aren't any help unless I can identify a specific problem. A friend (partner in a now-dead business) has an identical machine that was purchased at the same time. His machine exhibits none of these symptoms, which leads me to believe it is a hardware issue, but I can't figure out how to identify it. Any ideas? Utilities? Seen something similar? At this point I can't even identify any pattern to the behavior, but would be willing to run a "stress test"-style app for as long as a couple days if I had any hope that it would find something. EDIT July 17 I'm testing jerryjvl's answer regarding the video card, though I'm not sure it fully explains the symptoms yet. This morning I ran a video stress test. The test itself ran fine, but immediately afterward the PC started acting up again. I left ProcExp open and various system processes were consuming 50-60% of the CPU but with no apparent reason. For example, "services.exe" was eating about 40%, but the sum of its child processes wasn't higher than about 5%. I left it alone for several minutes to settle down, and then it was fine again. I used the "video card stability test" from firestone-group.com. Its output isn't very detailed, but it at least exercises the hardware pretty hard. EDIT July 22 Thanks for your excellent suggestions. Here is an update on what I have tried so far. Ran memtest86, SeaTools (Seagate), Hitachi drive fitness test, video card stability test (mentioned above). The video card test was the only one that seemed to produce any results, though it didn't occur during the actual test. I defragged the drive (again...) with JkDefrag I dropped the video card

  Read the article

• Ruby on Rails cannot find Initializer?

  - by Ryan M.

  Hello, I am trying to deploy an app to a fresh Ubuntu 10 installation using Passenger 2.2.15, Rails 2.3.5, Ruby 1.8.7, and Apache 2.2.14. However, even with a default rails app (sudo rails defaultapp), I am receiving the following error: "no such file to load -- initializer". I'm not sure which files you might need copies of in order to diagnose this problem, so I'll copy a few here and hope that it will help. Thanks for any help you can provide. -RM /etc/apache2/sites-available/default <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/appname/public <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> /etc/apache2/mods-available/passenger.conf <IfModule passenger_module> PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-2.2.15 PassengerRuby /usr/bin/ruby1.8 </IfModule> /etc/apache2/mods-available/passenger.load LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-2.2.15/ext/apache2/mod_passenger.so

  Read the article

• Browser says "Waiting for www.xyz.com" for a very long time

  - by Phil

  When I load my website (hosted with Ipage). The browser often takes an incredible long time saying "Waiting for www.xyz.com ..." before any elements of the site actually appear. After this "Waiting for" process, the text, images and everything else actually load quite fast. I contacted my host with my tracert result and they said they optimized my website database and increased the memory available to PHP on my account to 64 Mb.They also said they have checked the issue by accessing my website and found that it is loading fine without any slowness. It seems to be a temporary issue. Please try to access your website with different browser and network. I tried different browsers and networks but this "Waiting for" process always takes too long. My website is http://www.surreyextra.com/ . It's Wordpress and BuddyPress. I'm in the UK while Ipage host is placed in the USA, can this potentially be a problem? I have tried a number of optimizations, like minifying my CSS and JS files and use catching but the problem hasn't improved. So is it my host's fault, should I contact them again?

  Read the article

• ssh_exchange_identification: Connection closed by remote host

  - by rick

  Firstly, I know that this question has been asked a million times, and I have read everything I can find and still cannot fix the problem. i am encountering this issue when ssh'ing in from my mac to my Ubuntu server on a fresh install of Ubuntu (I reinstalled because of this issue). I have SSH portmapped to 7070 because my ISP is blocking 22. On the client: bash: ssh -p 7070 -v [email protected] debug1: Reading configuration data /etc/ssh_config debug1: Connecting to address.org port 7070. debug1: Connection established. debug1: identity file /home/me/.ssh/identity type -1 debug1: identity file /home/me/.ssh/id_rsa type 1 debug1: identity file /home/me/.ssh/id_dsa type -1 ssh_exchange_identification: Connection closed by remote host Here's what I have done to try to resolve the issue: Made sure my maxstartups is ok: bash: grep MaxStartups /etc/ssh/sshd_config #MaxStartups 10:30:60 Made sure hosts.deny is clear of denials. Made sure hosts.allow has my client IP. Clear out known_hosts on client Changed ownership of /var/run to root Made sure etc/run/ssh is Made sure /var/empty exists Reinstall openssh-server Reinstall ubuntu When I run telnet localhost, I get this: telnet localhost Trying ::1... Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused When I run /usr/sbin/sshd -t Could not load host key: /etc/ssh/ssh_host_rsa_key Could not load host key: /etc/ssh/ssh_host_dsa_key When I regenerate the keys with ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key I get the same error. I am pretty sure this is the issue. Can anyone help?

  Read the article

• Possible boot conflict?

  - by Evan Kroske

  I was installing Ubuntu on a computer on which Windows XP was already installed. The computer has multiple hard drive bays, so I decided to remove the XP HDD and install Ubuntu on a blank HDD when it was the only HDD in the system. Unfortunately, if I now try to boot Ubuntu with the Windows XP drive in the second slot, nothing will boot. However, if Windows XP is in the first slot, it will boot fine. Can anybody explain why this happens? When I was checking out the BIOS to see if something was messed up, I discovered that when Ubuntu is in the first slot, the BIOS doesn't recognize any HDDs. However, if XP is in the first slot, the BIOS recognizes both drives. Any hypotheses about why this happens? Edit: Here's the setup. I have an old server with seven SCSI HDD slots. I have five identical 68 Gb SCSI drives, but I can keep only two plugged in. XP is still installed on the first drive, but I reinstalled Ubuntu on the second drive and had Grub overwrite the XP bootloader on the first drive. Now, the setup works fine, and I can use Grub to load either XP or Ubuntu. However, if I plug in another identical blank HDD in the third slot, the computer recognizes only the XP drive and doesn't boot. Grub starts to load, then gives me a "disk not found" error. Running ls from the grub rescue prompt only shows one drive with two partitions. I guess this is a BIOS problem, but I'd still like to know what triggers it. What about a blank drive could cause the BIOS to freak out?

  Read the article

• HP Proliant DL380 G4 - Can this server still perform in 2011?

  - by BSchriver

  Can the HP Proliant DL380 G4 series server still perform at high a quality in the 2011 IT world? This may sound like a weird question but we are a very small company whose primary business is NOT IT related. So my IT dollars have to stretch a long way. I am in need of a good web and database server. The load and demand for a while will be fairly low so I am not looking nor do I have the money to buy a brand new HP Dl380 G7 series box for $6K. While searching around today I found a company in ATL that buys servers off business leases and then stripes them down to parts. They clean, check and test each part and then custom "rebuild" the server based on whatever specs you request. The interesting thing is they also provide a 3-year warranty on all their servers they sell. I am contemplating buying two of the following: HP Proliant DL380 G4 Dual (2) Intel Xeon 3.6 GHz 800Mhz 1MB Cache processors 8GB PC3200R ECC Memory 6 x 73GB U320 15K rpm SCSI drives Smart Array 6i Card Dual Power Supplies Plus the usual cdrom, dual nic, etc... All this for $750 each or $1500 for two pretty nicely equipped servers. The price then jumps up on the next model up which is the G5 series. It goes from $750 to like $2000 for a comparable server. I just do not have $4000 to buy two servers right now. So back to my original question, if I load Windows 2008 R2 Server and IIS 7 on one of the machines and Windows 2008 R2 server and MS SQL 2008 R2 Server on another machine, what kind of performance might I expect to see from these machines? The facts is this series is now 3 versions behind the G7's and this series of server was built when Windows 200 Server was the dominant OS and Windows 2003 Server was just coming out. If you are running Windows 2008 R2 Server on a G4 with similar or less specs I would love to hear what your performance is like.

  Read the article

• Loading a big database dump into PostgreSQL using cat

  - by RussH

  I have a pair of very large (~17 GB) database dumps that I want to load into postgresql 9.3. After installing the database packages, learning more or less how to use them, and fiddling around a little on various StackExchange pages (particularly this question), it looks like a proper command for me to use is something like: cat mydb.pgdump | psql mydb because of the format the dump is in. My machine has 16 GB of RAM, and I'm not familiar with the cat command but I do know that my RAM is 99% exhausted and the database is taking a while to load. My machine isn't non-responsive to the point of hanging; I can run other commands in other terminal windows and have them execute at a reasonable clip, but I am wondering if cat is the best way to pipe in the file or if something else is more efficient? My concern is that maybe cat could be using up all the RAM so the database doesn't have much to work with, throttling its performance. But I'm new to thinking about RAM issues like this and don't know if I'm worrying about nothing. Now that I think about it, this seems to be more of a question about cat and its memory usage than anything else. If there is a more appropriate forum for this question please let me know. Thanks!

  Read the article

• EngineX ignores Auth Basic?

  - by Miko

  I have configured nginx to password protect a directory using auth_basic. The password prompt comes up and the login works fine. However... if I refuse to type in my credentials, and instead hit escape multiple times in a row, the page will eventually load w/o CSS and images. In other words, continuously telling the login prompt to go away will at some point allow the page to load anyway. Is this an issue with nginx, or my configuration? Here is my virtual host: 31 server { 32 server_name sub.domain.com; 33 root /www/sub.domain.com/; 34 35 location / { 36 index index.php index.html; 37 root /www/sub.domain.com; 38 auth_basic "Restricted"; 39 auth_basic_user_file /www/auth/sub.domain.com; 40 error_page 404 = /www/404.php; 41 } 42 43 location ~ \.php$ { 44 include /usr/local/nginx/conf/fastcgi_params; 45 } 46 } My server runs CentOS + nginx + php-fpm + xcache + mysql

  Read the article

• What's the piece of hardware listening on Facebook's or Wikipedia's IP address?

  - by Igor Ostrovsky

  I am trying to understand how massive sites like Facebook or Wikipedia work, for my intellectual curiosity. I read about various techniques for building scalable sites, but I am still puzzled about one particular detail. The part that confuses me is that ultimately, the DNS will map the entire domain to a single IP address, or a handful of IP addresses in the case of round-robin DNS. For example, wikipedia.org has only one type-A DNS record. So, people from all over the world visiting Wikipedia have to send a request to the one IP address specified in DNS. What is the piece of hardware that listens on the IP address for a massive site, and how can it possibly handle all the load coming from the requests for users all over the world? Edit 1: Thanks for all the responses! Anycast seems like a feasible answer... Does anyone know of a way to check whether a particular IP address is anycast-routed, so that I could verify that this really is the trick used in practice by large sites? Edit 2: After more reading on the topic, it appears that anycast is not typically used for dynamic web content. Anycast is usually used for UDP (e.g., DNS lookups), or sometimes for static content. One interesting thing to note is that Facebook uses profile.ak.fbcdn.net to host static content like style sheets and javascript libraries. Each time I ping this name, I get a response from a different IP address. However, I can't tell whether this is anycast in action, or a completely different technique. Back to my original question: as far as I can tell, even a large site will have a single expensive piece of load-balancing hardware listening on its handful of public IP addresses.

  Read the article

• Dedicated virtual setup is slow with WordPress

  - by kovshenin

  Hey. I'm running a Fedora linux server on the Amazon EC2 platform. I'm pretty sure there's something wrong with my configuration as it seems to be very slow. SSH sometimes takes over 30 seconds to connect, a WordPress generated web page could take 5 seconds to load, and it could take 20 seconds to load, which is pretty awkward. MySQL queries are all executed in less than a second, so I don't think that's the case. I'm not really sure where the issue lies, but a simple page written in PHP loads instantly. A fresh WordPress installation starts lagging. Same works perfect on grid hosting at MediaTemple for instance, so I'm pretty sure I missed something. If you could please direct me to the right tools and articles which would help me out. Thanks so much! Fedora Core 8, php 5.2.6, MySQL 5.0.45, OpenSSH 4.7p1, OpenSSL 0.9.8b. PHP is configured as a module to Apache 2.2.9, all websites based on virtual hosts. I have some on-going php scripts running from time to time in the background via cron. Thanks.

  Read the article

• How do I diagnose the cause of a freeze after resuming in Windows XP (SP3)?

  - by Software Monkey

  I have just built a new computer from parts. Whenever I resume from any sleep mode (S1, S3 or S4) the computer freezes within about 60 seconds of the welcome screen appearing. I have updated the BIOS and all drivers to current from the motherboard manufacturer's site. I have reset BIOS settings to default, including disabling AMD Cool n Quiet. The windows event logs are not helpful at all. Other than immediately after resuming the system is stable as long as AMD CnQ is disabled. The system is: Mobo : MSI 790GX-G65 CPU : AMD Phenom II 965 BE at 3.6 GHz Memory : Corsair DDR3 1600, at 1333 MHz and 9-9-9-21 HDDs : 1 EIDE, 2 SATA in RAID-0 DVD : 1 Card Reader: 1 multi-card reader Keyboard is attached via PS2 and mouse is USB. Any thoughts or pointers would be most welcome. EDIT: It appears that the computer may not freeze if a program is left running which puts it under significant load. I left a stress test running which keeps all cores under 85% load, and my son put the computer to sleep - while this program is running it I have been able to resume from S3 successfully 4 times, compared against about 20 tests with the computer idle which have all frozen. So this may be related to being in an idle state when it resumes.

  Read the article

• Correct MySQL username/password, but getting Access Denied error when run from script

  - by Nick

  I'm currently trying to run the following command from within a shell script. /usr/bin/mysql -u username -ppassword -h localhost database It works perfectly fine when executed manually, and not from within a script. When I try to execute a script that contains that command, I get the following error: ERROR 1045 (28000) at line 3: Access denied for user 'username'@'localhost' (using password: YES) I literally copied and pasted the working command into the script. Why the error? As a sidenote: the ultimate intent is to run the script with cron. EDIT: Here is a stripped down version of my script that I'm trying to run. You can ignore most of it up until the point where it connects to MySQL around line 19. #!/bin/sh #Run download script to download product data cd /home/dir/Scripts/Linux /bin/sh script1.sh #Run import script to import product data to MySQL cd /home/dir/Mysql /bin/sh script2.sh #Download inventory stats spreadsheet and rename it cd /home/dir /usr/bin/wget http://www.url.com/file1.txt mv file1.txt sheet1.csv #Remove existing export spreadsheet rm /tmp/sheet2.csv #Run MySQL queries in "here document" format /usr/bin/mysql -u username -ppassword -h localhost database << EOF --Drop old inventory stats table truncate table table_name1; --Load new inventory stats into table Load data local infile '/home/dir/sheet1.csv' into table table_name1 fields terminated by ',' optionally enclosed by '"' lines terminated by '\r\n'; --MySQL queries to combine product data and inventory stats here --Export combined data in spreadsheet format group by p.value into outfile '/tmp/sheet2.csv' fields terminated by ',' optionally enclosed by '"' lines terminated by '\r\n'; EOF EDIT 2: After some more testing, the issue is with the << EOF that is at the end of the command. This is there for the "here document". When removed, the command works fine. The problem is that I need << EOF there so that the MySQL queries will run.

  Read the article

• How do I setup JBoss 5.1.0.GA to run multiple instances?

  - by djangofan

  Does anyone have any experience or advice in setting up multiple JBoss 5.1.x instances on the same machine that has 1 network card? Here is what I did: Installed JBoss 5.1.0.GA into c:\myjboss 1.5. I copied the server/default directory to server/ports-01 and server/ports-02 so they have their own config. did I assume correctly? Ran .\run.bat -c ports-01 Ran .\run.bat -c ports-02 At this point there are 2 instances but the second instance doesn't load correctly because of what is probably a few port conflicts. For example: the http port ends up being 8080 for both instances, which it gets from line #49 in the C:\myjboss\server\all\conf\bindingservice.beans\META-INF\bindings-jboss-beans.xml file. Earlier in the server load it clearly gets the value from line#63 in that same file. I don't know why it gets part of the port config from line #49 and the other part from line#63. Confused. I also tried: .\run.bat -Djboss.service.binding.set=ports-01 -c ports-01 and it made little difference. Any ideas on what I am doing wrong?

  Read the article

< Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >