Search Results

Search found 18488 results on 740 pages for 'android networking'.

Page 348/740 | < Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >

• Multiple Internet connections, multiple networks and split access in Linux

  - by Swapneel Patnekar

  I am having trouble setting up multiple internet connections for split access in Linux. We have 3 internet connections from 3 different ISP's. We want to configure our Linux gateway machine such that our three internal networks 10.2.1.0/24, 192.168.20.0/24 & 192.168.2.0/24 use ISP1, ISP2 and ISP3 respectively in a split access manner. Outlined below is the layout/settings, Interfaces of the Linux Gateway connected to Routers: eth0: 10.1.1.2<---------->10.1.1.1(Internal Interface of ADSL Router)[ISP1] eth1: 192.168.15.2<------>192.168.15.1(Internal Interface of 3G Router)[ISP2] eth3: 192.168.1.2<------->192.168.1.1(Internal Interface of ADSL Router)[ISP3] Kindly note that none of the interfaces in the Linux gateway has a public static IP address. Routers of ISP1 and ISP2 get assigned a dynamic public IP address when connected to the Internet, router of ISP3 has been assigned a public static IP address. Interface of Linux gateway connected to a switch, eth4: 10.2.1.1(LAN Interface for ISP1) eth4:0 192.168.20.1(LAN interface for ISP2) eth4:1 192.168.2.1(LAN Interface for ISP3) eth4:0 & eth4:1 are virtual interfaces with eth4 being the interface connected physically. Based on http://linux-ip.net/html/adv-multi-internet.html I've set the following routes, ip route flush table 4 ip route show table main | grep -Ev ^default | while read ROUTE ; do ip route add table 4 $ROUTE done ip route add table 4 default via 192.168.15.1 ip rule add fwmark 4 table 4 ip route flush cache Additionally, using the following iptables rules to mark & route packets as per the guide mentioned above : http://pastebin.com/KzWHFGJA At this point, computers from 192.168.2.0/24 network are successfully able to reach the Internet through ISP3. 192.168.20.0/24 and 10.2.1.0/24 are unable to access the Internet through ISP1 and ISP2 respectively. Any inputs will be much appreciated !

  Read the article

• static routes, cisco ASA, remote locations

  - by Jeff

  192.168.3.1(ASA) - 192.168.2.1(ASA) - ( internet ) - 192.168.1.1(ASA) DomainController, FS, Exchange 192.168.0.1(ASA) - above is a rough idea what my network setup looks like. each internal ip (192.168.x.x) is located behind an ASA. Each location has a different gateway for the internet. They all talk to the 192.168.1.1 network for dns, dhcp, dc, exchange and so on. They can only see the 192.168.1.1, they can not see each other. In my Static Routes on my 192.168.1.1 ASA, should i have them configure as follows? example: 192.168.x.x 255.255.255.0 Locations_Internet_Gateway_IP OR 192.168.x.x 255.255.255.0 Main_Locations_Internet_Gateway_IP not sure which configurtation is correct, thanks in advance for any help!

  Read the article

• Ubuntu, No wireless networks found after correctly installed madwifi

  - by Peter

  Hi, I just installed madwifi on my MSI laptop with an Atheros AR5001 wifi card & Lucid. As far as I can see and according to System - Administration - Hardware drivers the install was successful and the card + driver is up and running. However, I don't see any wireless network (my windows PC can see about 5 wireless networks). I tried it with the network manager applet as well as with wicd. If I try to connect to "Hidden Wireless Network" via nm-applet, it will start to connect for a while but is unable too (although I supply it with the correct WEP settings & key) So, I'm unable to use my wireless network. What am i doing wrong? Some information about my system: iwconfig lo no wireless extensions. eth0 no wireless extensions. wifi0 no wireless extensions. ath0 IEEE 802.11g ESSID:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:17 dBm Sensitivity=1/1 Retry:off RTS thr:off Fragment thr:off Power Management:off Link Quality=0/70 Signal level=-96 dBm Noise level=-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 pan0 no wireless extensions. ifconfig ath0 Link encap:Ethernet HWaddr 00:15:af:cf:e2:ca inet6 addr: fe80::215:afff:fecf:e2ca/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr 00:21:85:4d:82:78 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::221:85ff:fe4d:8278/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3800 errors:0 dropped:0 overruns:0 frame:0 TX packets:2944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3940261 (3.9 MB) TX bytes:525218 (525.2 KB) Interrupt:27 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) wifi0 Link encap:UNSPEC HWaddr 00-15-AF-CF-E2-CA-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3497 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:280 RX bytes:0 (0.0 B) TX bytes:179947 (179.9 KB) Interrupt:16 lshw -C network *-network description: Wireless interface product: AR5001 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wifi0 version: 01 serial: 00:15:af:cf:e2:ca width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath_pci latency=0 multicast=yes wireless=IEEE 802.11g resources: irq:16 memory:fd7f0000-fd7fffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 01 serial: 00:21:85:4d:82:78 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.101 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:27 ioport:c800(size=256) memory:fe2ff000-fe2fffff memory:fe2c0000-fe2dffff(prefetchable) lspci 00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) 00:04.0 PCI bridge: ATI Technologies Inc Device 7914 00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) 00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] 01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio Controller 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 06:04.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21) 06:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 06:04.3 Bridge: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 06:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) less /proc/modules | grep ath ath_rate_sample 11476 1 - Live 0xf812b000 ath_pci 193197 0 - Live 0xf85c3000 wlan 222892 5 wlan_wep,wlan_scan_sta,ath_rate_sample,ath_pci, Live 0xf8537000 ath_hal 398604 3 ath_rate_sample,ath_pci, Live 0xf8480000 I've been at this for hours now, also tried ndiswrapper and ath5k drivers with no luck, and really could use some help. Cheers.

  Read the article

• Block spam by using geoip filter?

  - by faultyserver

  We are looking for a way to be able to block spam based on geographic location by filtering using geoip. context: we rarely have any email correspondence outside of the USA, so we would like to block all incoming email outside the US except for maybe one or two countries. After a little Googling I have found a couple of solutions that may work (or not), but I would like to know what other sysadmins are currently doing or what they would recommend as a solution. Here is what I have found so far: Using PowerDNS and its GeoIP backend it is possible to use geoip for filtering. Normally this backend is used to help distribute load as a kind of load balancing but I dont see why it couldnt be used to kill spam as well? Possibly use the Maxmind lite country database and some scripting to do a similar job. Ideally what I am looking for is a solution that would handle decent load and scale well too...aren't we all! ;) Thanks in advance for your help! :-)

  Read the article

• Are there any security concerns when using Windows' default workgroup?

  - by koiyu

  Are there any security concerns one should be aware of if you're using Windows' default workgroup as the workgroup? (Or is worrying just tinfoiling?) Should it be commonplace to rename the workgroup to something personal/unique after Windows installation? Are there any other benefits in renaming the workgroup from the default besides making it to look more describing? Ie. is renaming worth the hassle as it makes the workgroup generally less accessible? It is used in local area network after all.

  Read the article

• On a Mac, how are connections (possibly by spyware) made to outside internet addresses during initia

  - by TT

  I am trying to secure a Mac after discovering that network links are being established to some unwanted internet sites. Using 'lsof -i' (list open 'files', internet) I have seen that launchd, ntpd, firefox, dropbox and other processes are either 'LISTENING' or have 'ESTABLISHED' links to a site or sites which I suspect have to do with spyware. I have been trying to find startup files and preference lists that initiate thise links but can't find them. I could easily reinstall the OS and restore data from a backup but I'd prefer to know how to fix this as I have six Macs to look after. Thanks...

  Read the article

• Intermittent connection issues with atheros ar9285

  - by MrStatic

  I have an asus K50IJ which has an atheros ar9285 wifi chip. It has decided to start to randomly drop internet. Although the card doesn't seem to notice it has. It will show full signal instead of say 3 bars. I tried to look at the atheros site for the latest driver but they don't even offer driver downloads. I then checked the asus site and it doesn't even list that card in the downloads for this laptop. I run Windows 7 64bit. It will drop either every minute or once a day while I am doing intensive bandwidth usage and when I am just idling.

  Read the article

• How do I get a Wireless N PCi card to connect to a wireless G router?

  - by Andy

  I'm having some problems setting up a new wireless PCI card on a WinXP SP3 PC. I know that the router is configured correctly. It is a Linksys WRT54GL, using 802.11b/g. Security mode is WPA2 Personal with TKIP+AES encryption. I am able to connect to this fine using my laptop (first gen MacBook with a 802.11b built in card). The new PCI card is also Linksys, but it supports 802.11n. Card seems to be installed ok (Windows sees it fine, doesn't list any errors in Device Manager), however when it scans for available wireless networks it can't find my wireless network (the router is set to broadcast the SSID). I tried to enter the network SSID manually, but that didn't seem to help. I chose WPA2-PSK for network authentication. The only options for encryption are TKIP or AES - I've tried both, neither worked. I am sure that I typed in my wireless key correctly. At this point, I don't think the problem is with encryption, but something else. It almost seems like I need to switch the wireless card into g mode, but I haven't found a way to do that (if that is even possible/necessary - I thought n was fully backwards compatible with g). Also, the PC is in the same room as the router, and my laptop, so I don't think that it is an interference issue. Any ideas what I'm doing wrong? I'm running out of things to try at this point. :(

  Read the article

• Setting up 802.1X wireless connection on OSX

  - by hizki

  I am an OSX user, I have Snow Leopard 10.6.5 and an updated AirPort. I am trying to connect to my university's wireless network, but it has a complex security that I am having trouble defining... Here there are instructions for connecting with Windows XP, Windows 7 and Linux. Can someone please instruct me what should I do to set up this network on my MAC? Thank you. P.S. I have had previous success in setting up this network, but I have no idea what I did that made it work. Since I updated my AirPort it worked only seldomly and very slowly... Before the update, even when it worked it never remembered my password.

  Read the article

• Wireless 802.11x Disconnects

  - by BillP3rd

  I've looked at (and read) all of the similar questions and none of them get exactly to the issue I'm having at home. I have an 802.11g access point (two, actually, with different SSIDs and on different channels). One is an Airlink AR525W. The other is a Linksys WRT54G v.2. The issue is that at random times, my laptop will lose its wireless connection. This occurs regardless of which access point I'm connected to. When I lose the connection, the affected AP no longer appears in the list of available APs. Also, it doesn't have anything to do with walls or distance. It can happen within 30' and when my laptop is literally within line-of-sight. When it loses the signal, it can take from 10 to 30 minutes to reconnect and it always will without intervention. I've done all the “standard” things to troubleshoot the problem and it has improved. For example, I surveyed other access points in my vicinity and have selected a different channel for each of my APs that no one else nearby is using. Both APs are configured WPA2/AES. I'm down to wondering [Note: This is not a shopping question. I'm not buying a new AP] if the fact that I didn't drop two bills on my APs and instead opted for more modest solutions has anything to do with it? I've oft wondered why anyone would go for the high-end AP when they didn't have to. Also, I am aware of DD-WRT and have chosen not to go there because only one of my APs is supported. Oh, and one final thing. It an HP x64 laptop running Windows 7 Ultimate. The wireless interface is an Atheros AR9285 802.11b/g/n WiFi Adapter. All the latest drivers and service packs have been applied. It did the same thing with my old laptop (a Lenovo) so I don't the problem is in the laptop. It's really annoying when this happens and suggestions of things I haven't thought of or may have overlooked (No, really. As unlikely as it is, I admit that I may have overlooked something :-)) are appreciated.

  Read the article

• OS X 10.6 won't automatically connect to wireless even though remember network is checked

  - by Hendy

  Upgraded to 10.6 recently. 10.5 would connect to my home network whenever I was home. 10.6 constantly pops up the network selection dialog and asks me what network I want to join. I click my home network and the password is already entered (so it "remembers" the network). "Remember network" is checked... but it does it every time. How do I get 10.6 to connect to networks automatically whenever it sees them?

  Read the article

• Connecting to localhost resolves 127.0.0.1 but connects with external IP [Linux, Debian]

  - by skgsergio

  I'm having a problem with a dedicated server, I don't known if it's the default behavior but this is the problem: If I connect to a service located on the server with localhost the service gets as source IP the external IP. Let me show an example, I use netcat for listening on 127.0.0.1:4444 xxxxxx # nc -vv -l -s 127.0.0.1 -p 4444 listening on [127.0.0.1] 4444 ... Lets check if it's ok: xxxxxx ~ # netstat -atnp | grep 4444 tcp 0 0 127.0.0.1:4444 0.0.0.0:* LISTEN 14038/nc Ok lets connect: xxxxxx ~ # nc -vv 127.0.0.1 4444 localhost [127.0.0.1] 4444 (?) open Return to the tty that have the listening process and I get this: connect to [127.0.0.1] from xxxxxx.net [176.31.xxx.xx] 50354 So that's the problem. I have a server daemon that have to listen on localhost and checks that the ip is 127.0.0.1 when the client connects but for some reason when I connect to localhost it reports the external ip... If I do the same with IPv6 it works as excepted... Detects connection as localhost (::1). Some info that can be useful: "localhost" resolves without problems to 127.0.0.1 xxxxxx ~ # ping -c1 localhost PING localhost (127.0.0.1) 56(84) bytes of data. 64 bytes from localhost (127.0.0.1): icmp_req=1 ttl=64 time=0.086 ms Nothing weird on my hosts file, I think... xxxxxx ~ # grep -v ^# /etc/hosts 127.0.0.1 localhost localhost.localdomain 176.31.xxx.xx xxxxxx.net ns1.xxxxxx.net ::1 ip6-localhost ip6-loopback feo0::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts And ifconfig reports all ok... eth0 Link encap:Ethernet HWaddr e0:69:95:d8:30:a1 inet addr:176.31.xxx.xx Bcast:176.31.108.255 Mask:255.255.255.0 inet6 addr: 2001:41d0:8:xxxx::/64 Scope:Global inet6 addr: 2001:41d0:8:xxxx:x:xx:xx:xx/64 Scope:Global inet6 addr: fe80::e269:95ff:fed8:30a1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16916 errors:0 dropped:0 overruns:0 frame:0 TX packets:16914 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8410679 (8.0 MiB) TX bytes:10539881 (10.0 MiB) Interrupt:28 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:5570 errors:0 dropped:0 overruns:0 frame:0 TX packets:5570 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:744490 (727.0 KiB) TX bytes:744490 (727.0 KiB)

  Read the article

• Network Printers

  - by Jack

  We have a sever that shares all the printers. The PC's that are running on XP professional get a error message quoting (Connect to Printer). The only way I can find to get around the problem is by restating the printer and as soon is it comes online you can then add it but you have not got long. do you think it could be anything to-do with updates on the sever? the sever system is running Windows Server 2003 any help would be much appreciated. Thanks

  Read the article

• rfkill unblock all does not activate a certain wireless card

  - by Davidos

  With an intel 1000 wireless card; rfkill list 0: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: tpacpi_bluetooth_sw: Bluetooth Soft blocked: yes Hard blocked: no rfkill unblock all 0: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no Why does my wireless card not turn on?

  Read the article

• How to discover if a specific address/port is reachable?

  - by marco.ragogna

  I need a simple utility that allow me to check if a PC, attached to a local network, is able to reach a specified address:port using specified protocol like TCP or UDP Machine's OS I will use to do the check is Windows XP. Can you help me, please?

  Read the article

• Windows could not set up internet connection sharing (ICS)

  - by Osa

  I'm trying to make an ad-hoc network for personal uses.. while creating it, it was created but when i tried to turn internet sharing on i got this error Windows could not set up internet connection sharing (ICS) I looked up google what is ICS and i found that it was an option in sharing tab in my connection properties, so i tried to enable it and i got this error An error occurred while internet connection sharing was being enabled. The dependency service does not exist or has been marked for deletion. I tried to also look up google for solution for this and i ended up with nothing really, i tried to enable the required services @ services.msc for it.. rebooted and still same thing it was working a while ago (had a problem at enabling my wireless for about 2 months and i just found a solution for it..) for some reason it doesn't now

  Read the article

• How to connect to a Virtualbox guest from the host when network cable unplugged

  - by Greg K

  I'd like to work offline (I'm flying to the US twice this month), to do this I need access to a linux development server. When I work from home I boot a VirtualBox VM and that acts as my dev server for the day (providing Apache, PHP & MySQL to run my server side code). However, I'd like to work with my VM when I'm not connected to a network. I have my Ubuntu VM guest set up with a bridge connection so it can serve HTTP and provide SSH access from inside my local network. I've tried to manually configure my network settings on both Mac OSX (the host) and Ubuntu (the guest) but I can't even ping my own NIC address (127.0.0.1 can, 192.168.21.x I can't) in OS X when I unplug the cable. Manual network settings: $ ifconfig en0 en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:xx:xx:xx:xx:xx inet 192.168.21.5 netmask 0xffffff00 broadcast 192.168.21.255 media: autoselect (100baseTX <full-duplex,flow-control>) status: active I can ping localhost fine, as well as my VM (.20) and SSH too. $ ping 192.168.21.5 PING 192.168.21.5 (192.168.21.5): 56 data bytes 64 bytes from 192.168.21.5: icmp_seq=0 ttl=64 time=0.085 ms 64 bytes from 192.168.21.5: icmp_seq=1 ttl=64 time=0.102 ms 64 bytes from 192.168.21.5: icmp_seq=2 ttl=64 time=0.100 ms 64 bytes from 192.168.21.5: icmp_seq=3 ttl=64 time=0.094 ms $ ping 192.168.21.20 PING 192.168.21.20 (192.168.21.20): 56 data bytes 64 bytes from 192.168.21.20: icmp_seq=0 ttl=64 time=0.910 ms 64 bytes from 192.168.21.20: icmp_seq=1 ttl=64 time=1.181 ms 64 bytes from 192.168.21.20: icmp_seq=2 ttl=64 time=1.159 ms 64 bytes from 192.168.21.20: icmp_seq=3 ttl=64 time=1.320 ms Network cable unplugged: $ ifconfig en0 en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:xx:xx:xx:xx:xx media: autoselect status: inactive $ ping 192.168.21.5 PING 192.168.21.5 (192.168.21.5): 56 data bytes ping: sendto: No route to host ping: sendto: No route to host Request timeout for icmp_seq 0 ping: sendto: No route to host Request timeout for icmp_seq 1 Does OS X disable the NIC when the network cable is unplugged? Any way to stop it doing this?

  Read the article

• Autonegotiate errors between HP and Cisco hardware?

  - by Satanicpuppy

  This is a bit of a specific extension to this question. I've got two ASA's that feed into a Procurve switch, and then into an IPS. All is well except that the procurve absolutely refuses to autonegotiate with the ASA's...The asa's run 100full, and the procurve autonegotiates to 100half. It does it for both ASA's, so it's probably not a failure on one of them, and everything works fine if I force the procurve to 100full. Has anyone else seen this issue? I've been buying more HP hardware, but I'm not keen on getting equipment that's not going to play nice with my Cisco backbone.

  Read the article

• Double GPRS/EDGE speed with two mobile phones at once?

  - by Patrick

  Hi, I'm using my mobile phone to connect to the internet in an area where only GPRS/EDGE is available. To increase the connection speed I would like to use a technique called connection teaming. E.g. I would use two mobile phones / usb sticks to go online with different providers at the same time and let the software distribute requests over both connections. My questions are: is there a software available to do connection teaming? It sounds like Midpoint was able to do it but it's over 7 years old and is unlikely to run on Windows 7 has anybody tried this? Thanks a lot, Patrick

  Read the article

• Setting up a proxy for FTP - Windows

  - by RadiantHex

  Hi folks, I have 2 windows machines and a server. 1 is my laptop, the other is a workstation that the IP of which is white-listed on the server. The laptop has a dynamic IP, so the IP cannot be white-listed. I would like to be able to perform FTP transfers from my laptop to the server, while using the workstation as a proxy. Both machines are using Windows 7. Is this possible? Help would be amazing!

  Read the article

• I used route delete 0.0.0.0 in Windows 7 and now i can't connect to my adsl internet

  - by Santiago Sanchez

  I was looking for a way to portfoward 0.0.0.0 default gateways and I found in a Microsoft page that I had to try the command route delete 0.0.0.0, my internet disconnected and I couldn't connect to the internet anymore... Does anyone have a solution? It's an ADSL Modem. I have: Windows 7 x32 4 GB ram A kanji modem that has this problem too... It's like Windows doesn't detect the wireless adapter, so it won't connect to the internet.

  Read the article

• Broadcom BCM5716 Hangs on CentOS 6 Boot

  - by someotherguy

  I have a fresh CentOS 6 installation on a Dell R310 server with a Broadcom BCM5716. The onboard NIC is causing the boot to hang for some reason. Welcome to CentOS Linux Starting udev: udev: starting version 147 Boardcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.23b (Feb 01, 2011) bnx2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 That's it... then it just hangs / freezes. If I disable the NIC via the BIOS settings, CentOS boots fine. I've downloaded and installed the latest driver from Broadcom's website. Any ideas?

  Read the article

• Can't connect to Apple Time Capsule in home network using Home Plugs from Win 7 Machine

  - by Eugene

  I have the following home network setup with subnet 255.255.255.0 but recently moved my time capsule to a different location when I added a third Home Plug and can no longer ping or map a network drive to it from the Windows 7 Machine. However using Airport Utility on the Windows 7 machine I can manually configure the Time Capsule. Using a Macbook on WIFI Network 1 or 2 - I can backup to the time capsule, so its accessible via both the router wifi network and the time capsule wifi network. The Time Capsule is set to BRIDGE function - ie no NAT or DHCP server enabled. Any bright sparks out there that can help diagnose the problem? Router (192.168.1.254) WIFI Network 1 | | |---- Home Plug one |---- Home Plug Two | |---- Computer A Windows 7 (192.168.1.160) | |---- Printer (192.168.1.69) |---- Home Plug Three | |---- Apple Time Capsule (192.168.1.150) WIFI Network 2 |---- Smart TV (192.168.1.70) | |---- Apple TV (192.168.1.4)

  Read the article

• How can I find the USB wireless adapter into the dmesg log file?

  - by AndreaNobili

  I am pretty new in Linux (RaspBian for RaspBerry Pi but I think that there are not difference) and I have to install an USB wireless network adapter (the product is the TP-Link TL-WN725N, this one: http://www.tp-link.it/products/details/?model=TL-WN725N ) Now, I think that this is not automatically recognized by my system because if I execute ifconfig command I obtain the following output: pi@raspberrypi ~ $ ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:2a:9f:b0 inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:424 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:34195 (33.3 KiB) TX bytes:89578 (87.4 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) So now it see only my ethernet network interface and not the wireless. So I was thinkig to try to see into the dmesg, but I don't know what have I to see and how to select it into the dmesg output. For example by the following command I can see the line of the dmesg log file relate to my ethernet port: pi@raspberrypi ~ $ cat /var/log/dmesg |grep -i eth [ 3.177620] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2a:9f:b0 [ 18.030389] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 19.642167] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 But what can I try to search for the USB wireless adapter? Tnx

  Read the article

• VoIP - need setup ip network with our SIP operator

  - by evgeniy.labusnkiy

  Need to make next one: for ex i'm now in UAE, but i need to make a call to my girlfriend who is in Ukraine. I need to find the way how can i make the connection to my home router and make the call from VoIP gateway using my standard phone network in Ukraine. I have some imagination about this, to do like this: Connect to router or VoIP gateway (how? soft?) using inet - Gateway make a call using standard phone line in my country. Any ideas? Best practice? What devices i need to make this? Pay attention that i don't want to use any SIP providers. Thats a lot!

  Read the article

< Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >