Search Results

Search found 15438 results on 618 pages for 'static allocation'.

Page 348/618 | < Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >

• Configuring Wireless Network

  - by Vinod K

  I have vyataa router on VMware with 2 interfaces eth0 and eth1 eth0 is facing the internet eth0 is in Nat mode with dhcp on eth1 is in bridged mode with my ethernet with ip 10.0.2.34/24 The ethernet card is at ip 10.0.2.95/24 i have defined the nat rule. Hence internet is available at eth1 too. Now i am connecting a wireless router at "eth1" iball router, I have connected the router using a cable to the ethernet interface of my laptop. I have configured the WAN connection type as "Static IP" and given "10.0.2.34/24" All the clients that connect using wireless router cannot connect to the internet though. Could anyone provide me a solution for this.. Thank You!!

  Read the article

• How to access an node of an LAN via WAN?

  - by gilzero

  Lets say I have a router that is connected to the Internet. An WAN IP address is given by ISP. It is using PPPoE ADSL, the IP address is not static, every time it connected, assigned a different IP address. There is an web server 192.168.0.100 running in the LAN. I heard something like DMZ + DynDNS can do the job? But not sure what these are and how they work. Any there way(s) to access the local node 192.168.0.100 via WAN, so that I can reach that node even I am not home. Thanks for any advice.

  Read the article

• Android - Efficient way to draw tiles in OpenGL ES

  - by Maecky

  Hi, I am trying to write efficient code to render a tile based map in android. I load for each tile the corresponding bitmap (just one time) and then create the according tiles. I have designed a class to do this: public class VertexQuad { private float[] mCoordArr; private float[] mColArr; private float[] mTexCoordArr; private int mTextureName; private static short mCounter = 0; private short mIndex; As you can see, each tile has it's x,y location, a color array, texture coordinates and a texture name. Now, I want to render all my created tiles. To reduce the openGL api calls (I read somewhere that the state changes are costly and therefore I want to keep them to a minimum), I first want to hand ALL the coordinate-arrays, color-arrays and texture-coordinates over to OpenGL. After that I run two for loops. The first one iterates over the textures and binds the texture. The second for loop iterates over all Tiles and puts all tiles with the corresponding texture into an IndexBuffer. After the second for loop has finished, I call gl.gl_drawElements() whith the corresponding index buffer, to draw all tiles with the texture associated. For the next texture I do the same again. Now I run into some problems: Allocating and filling the FloatBuffers at the start of each rendering cycle costs very much time. I just run a test, where i wanted to put 400 coordinates into a FloatBuffer which took me about 200ms. My questions now are: Is there a better way, handling the coordinate and color structures? How is this correctly done, this is obviously not the optimal way? ;) thanks in advance, regards Markus

  Read the article

• OOP implementation of BUFFS and Stats. Suggestion

  - by Mattia Manzo Manzati

  I am developing an MMORPG server using NodeJS. I am not sure how to implement Buffs, i mean, equipped objects or used skills have effects on the Player() which has many Stats(), some of them have a max cap... Effects can change the Stat value, increasing or decreasing it by a value, a percentage or completly rewrite the value of the stat. After a while I have decided to create a base class for buffs, which can be hidden (if they are casted from an equipped object) or shown if they came from an ability (Spell). Anyway I need suggestion how to implement it, use an array for all active buffs for a stat and have a function calculate the value of the stat affected by buffs each time I need the value of the stat or...? Other more OOP's ways to do it? I have read this What's a way to implement a flexible buff/debuff system? but this implements only a percentage system, which buffs can only say "+10%, +20%, etc...", but I would love to have an hybrid system, which can have percentage values or static values (like WoW does), and using modifiers it's hard to implement, because modifiers refers to the current value of stat :/ Thanks for suggestions :)

  Read the article

• Second display freaks out when waking from sleep

  - by inkedmn

  I have two laptops, an older white MacBook and a brand new Macbook Pro. When either computer is on my desk, I connect it to a second, widescreen display (Acer, a couple years old, uses DVI). The Macbook connects via mini DVI and the MBP connects via mini displayport. When the Macbook is connected and everything goes to sleep, I'm able to wake the machine and both displays in the normal way and everything is fine. Sometimes, when waking the MBP, the laptop and primary display are fine, but the second display shows a bunch of static. If I restart the display, everything's fine. This probably happens 70% of the time when the MBP goes to sleep while connected to this display. Any idea what could be causing this?

  Read the article

• Problem with missing JSON functions on PHP 5.2.6 / Plesk 8.4

  - by Drachenviech

  I have a vserver running openSuse 10.3, Apache 2 and Plesk 8.4. I can update/upgrade neither, as it is apparently not recommended to upgrade openSuse 10.3 (and an update to the EOL 10.4 does not seem to make much sense) and Plesk fails to update no matter what version I try (even fails to upgrade to 8.4.1). Still I can live with that somehow, primarily because I don’t have the time to do a fresh remote install on the vserver. What really is a problem is, that though the installed PHP is 5.2.6 it has no zip library and no json functions. The first is probably because PHP was not compiled with --enable-zip. The second is a big mystery though. As I understand it, it always comes with PHP unless its compiled with the --disable-json configure option. This is however not the case. And the json extension module is just not there. I even tried to enable it with extension=json.so with no luck either. the configure options of my PHP are (as shipped with Plesk 8.4) '../configure' '--prefix=/usr' '--datadir=/usr/share/php5' '--mandir=/usr/share/man' '--bindir=/usr/bin' '--with-libdir=lib' '--includedir=/usr/include' '--sysconfdir=/etc/php5/apache2' '--with-config-file-path=/etc/php5/apache2' '--with-config-file-scan-dir=/etc/php5/conf.d' '--enable-libxml' '--enable-session' '--with-mm' '--with-pcre-regex=/usr' '--enable-xml' '--enable-simplexml' '--enable-spl' '--enable-filter' '--disable-debug' '--enable-inline-optimization' '--disable-rpath' '--disable-static' '--enable-shared' '--program-suffix=5' '--with-pic' '--with-gnu-ld' '--with-system-tzdata=/usr/share/zoneinfo' '--with-apxs2=/usr/sbin/apxs2' '--disable-all' '--disable-cli' As I understand it, PECL is not an option with 5.2.6. Or am I mistaken? Even if I was not, the openSuse repository only goes as far as PHP 5.2.4. The openSuse install even came without zypper, which I had to manually install. So is there a way to get ziplib and json running in PHP 5.2.6 without having to recompile the binary?

  Read the article

• Create a tunnel to my dedicated windows server

  - by Mobiz

  I have a Win 2008 dedicated server. The remote access for MSSQL db is disabled. However I want to connect to it during development from my system. I need to create something like a tunnel from my lap so as to access it. I don't have static IP. Another reason for mentioning about creating tunnel is that my server IP has been whitelisted with other server. The data must originate from my dedicated server then only I can do the testing.

  Read the article

• Computer becomes unreachable on lan after some time

  - by Ashfame

  I work on my laptop and ssh into my desktop. I use a lot of key based authentication for many servers for work but recently I couldn't login because ssh would pick up and try all the keys and it stops trying before ultimately falling back to password based login. So right now I am using this command: ssh -X -o PubkeyAuthentication=no [email protected] #deskto The issue is after sometime the desktop would just become unreachable from laptop. I won't be able to open its localhost through IP and today I tried ping'in it and found a weird thing. Instead of 192.168.1.4, it tries to ping 192.168.1.3 which I am sure is the root cause as it just can't reach 192.168.1.4 when its actually trying for 192.168.1.3 Ping command output: ashfame@ashfame-xps:~$ ping 192.168.1.4 PING 192.168.1.4 (192.168.1.4) 56(84) bytes of data. From 192.168.1.3 icmp_seq=1 Destination Host Unreachable From 192.168.1.3 icmp_seq=2 Destination Host Unreachable From 192.168.1.3 icmp_seq=3 Destination Host Unreachable From 192.168.1.3 icmp_seq=4 Destination Host Unreachable From 192.168.1.3 icmp_seq=5 Destination Host Unreachable From 192.168.1.3 icmp_seq=6 Destination Host Unreachable From 192.168.1.3 icmp_seq=7 Destination Host Unreachable From 192.168.1.3 icmp_seq=8 Destination Host Unreachable From 192.168.1.3 icmp_seq=9 Destination Host Unreachable ^C --- 192.168.1.4 ping statistics --- 10 packets transmitted, 0 received, +9 errors, 100% packet loss, time 9047ms pipe 3 Also the ping command message comes in multiple and not one by one. (izx answer's the weirdness I thought there was in ping command.) I did check for desktop, its local IP is still the same, so something is going on in my laptop. Any ideas? P.S. - Laptop runs Ubuntu 12.04 & Desktop runs Ubuntu 11.10 Laptop is connected through wifi to router and Desktop is connected through LAN to router. Update: Even after setting up static IP leases in router settings, I again ran into this issue.

  Read the article

• How to restrict HTTP Methods

  - by hemalshah

  How can I restrict HTTP methods to those required by the MOSS07 application(s) using IIS6? Update This is what was written in the document IIS6 should be used to restrict HTTP methods to those required by the MOSS07 application(s). I also searched some books and saw something curious in O'Reilly's Sharepoint 2007 by James Pyles and others. There is no real suppported way to use HTTP POST and HTTP GET because of the web.config settings and the static definition of the WSDL. In the web.config <protocols> <remove name="HttpGet"> <remove name="HttpPost"> <remove name="HttpPostLocalHost"> <add name="Documentation"> </protocols> If we do this in the Web.Config file, would it solve the problem?

  Read the article

• Writing Java in Java

  - by Skeith

  I have been using Java for several months at work now and am becoming mildly competent in it. The problem I think I am having is that I program C++ in Java . By that I mean I have always used C++ and am treating Java as a simple syntax change instead of appreciate if for its own language. For instance a static variable in C++ is the same as a normal variable in Java as Java is all classes so they maintain there values between function calls. Little things like this are tripping me up constantly as I am self taught. What I want is to invest the time to become a good java programmer not just a C++ programmer that can write in Java. The problem is I do not know how to do this. I have tried reading the Java doc pages but I find them very clinical and hard to understand. So what I am looking for is recommendations on how I can learn to think in Java. Books that teach Java concepts not Java syntax, online tutorials that I can work through that give it a context, established Java traditions/best practices and any other thing that you could recommend.

  Read the article

• JAVA - multirow array

  - by user51447

  Here is my situation: a company has x number of employees and x number of machines. When someone is sick, the program have to give the best possible solution of people on the machines. But the employees can't work on every machine. I need a code for making little groups of possible solutions. this is a static example private int[][] arrayCompetenties={{0,0,1,0,1},{1,0,1,0,1},{1,1,0,0,1},{1,1,1,1,1},{0,0,0,0,1}}; = row is for the people and columns are for machines m1 m2 m3 m4 m5 m6 m7 p1 1 1 p2 1 1 1 1 p3 1 1 1 p4 1 1 1 p5 1 1 1 1 p6 1 1 1 1 p7 1 1 1 1 1 1 my question = with what code do i connect all the people to machine in groups (all the posibilities) like: p1 - m1 , p2-m2 , p3 - m3 , p4-m4 , p5 - m5 , p6-m6 p1 - m1 , p2-m3 , p3 - m3 , p4-m4 , p5 - m5 , p6-m6 p1 - m1 , p2-m4 , p3 - m5 , p4-m4 , p5 - m5 , p6-m6 p1 - m1 , p2-m5 , p3 - m3 , p4-m4 , p5 - m5 , p6-m6 p1 - m1 , p2-m2 , p3 - m3 , p4-m4 , p5 - m5 , p6-m6 .... i need a loop buth how? =D thanks!

  Read the article

• Whats a good way to do Collision with 2D Rectangles? can someone give me a tip?

  - by Javier

  using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Xna.Framework; namespace BreakOut { class Field { public static Field generateField() { List<Block> blocks = new List<Block>(); for (int j = 0; j < BlockType.BLOCK_TYPES.Length; j++) for (int i = 0; i < (Game1.WIDTH / Block.WIDTH); i++) { Block b = new Block(BlockType.BLOCK_TYPES[j], new Vector2(i * Block.WIDTH, (Block.HEIGHT + 2) * j + 5)); blocks.Add(b); } return new Field(blocks); } List<Block> blocks; public Field(List<Block> blocks) { this.blocks = blocks; } public void Update(GameTime gameTime, Ball b) { List<Block> removals = new List<Block>(); foreach (Block o in blocks) { if (o.BoundingBox.Intersects(new Rectangle((int)b.pos.X, (int)b.pos.Y, Ball.WIDTH, Ball.HEIGHT))) //collision with blocks { removals.Add(o); } } foreach(Block o in removals) blocks.Remove(o); //removes the blocks, but i need help hitting one at a time } public void Draw(GameTime gameTime) { foreach (Block b in blocks) b.Draw(gameTime); } } } My problem is that My collision in this sucks. I'm trying to add collision with a ball and hitting against a block and then one of the blocks dissapear. The problem i'm having is: When the ball hits the block, it removes it all in one instance. Please people don't be mean and say mean answers to me, im just in highschool, still a nooby and trying to learn more c#/XNA..

  Read the article

• Windows Firewall rule based on domain name instead of IP

  - by DennyDotNet

  I'm trying to allow a service to a set of machines via Windows Firewall. I'd like to add my home machine to the firewall but my home machine has a dynamic ip address. I use dyndns so that I have a hostname which I can always connect to. So I'm trying to see if there is a way I can use my hostname instead of an IP. Thanks Update Let me add a little more information, perhaps there are other ways to resolve my issue. The server is a web server hosted by RackSpace. I only want to allow RDP access from my work (static IP, so no problem) and home (dynamic). My home IP doesn't change too often, just often enough to annoy me. So maybe there is a better way to do this... maybe VPN?

  Read the article

• WCF - Automatically create ServiceHost for multiple services

  - by Rajesh Pillai

  WCF - Automatically create ServiceHost for multiple services Welcome back readers!  This blog post is about a small tip that may make working with WCF servicehost a bit easier, if you have lots of services and you need to quickly host them for testing. Recently I was encountered a situation where we were faced to create multiple service host quickly for testing.  Here is the code snippet which is pretty self explanatory.  You can put this code in your service host which in this case is  a console application. class Program   {       static void Main(string[] args)       { // Stores all hosts           List<ServiceHost> hosts = new List<ServiceHost>();           try           { // Get the services element from the serviceModel element in the config file               var section = ConfigurationManager.GetSection("system.serviceModel/services") as ServicesSection;               if (section != null)               {                   foreach (ServiceElement element in section.Services)                   { // NOTE : If the assembly is in another namespace, provide a fully qualified name here in the form // <typename, namespace> // For e.g. Business.Services.CustomerService, Business.Services                       var serviceType = Type.GetType(element.Name); // Get the typeName                        var host = new ServiceHost(serviceType);                       hosts.Add(host); // Add to the host collection                       host.Open(); // Open the host                   }               }               Console.ReadLine();           }           catch (Exception e)           {               Console.WriteLine(e.Message);               Console.ReadLine();           }           finally           {               foreach (ServiceHost host in hosts)               {                   if (host.State == CommunicationState.Opened)                   {                       host.Close();                   }                   else                   {                       host.Abort();                   }               }           }       }   } I hope you find this useful.  You can make this as a windows service if required.

  Read the article

• Scalable WordPress Host for High-Volume Site?

  - by Jonathan Eunice

  I need recommendations for a scalable web host for a high volume WordPress web site. For my purposes, high-volume might be 100K-500K visitors/hour. Might think towards a 1M/hour burst rate as a "high water mark." I know WP isn't the highest-performing platform out there (ha!), but it's non-negotiable. I can do "the usual optimizations" (e.g. put static files in a CDN, run and follow the advice of performance analyzers like YSlow, etc). But it will still be WordPress, and there will be a dozen or so plugins involved. So, where to host the site? Most "what's the best WordPress host?" discussions seem to focus on lowest-cost. I need the opposite. What are the high-volume, scalable, or clustered WordPress hosts with which you've had great experiences?

  Read the article

• Identify high CPU consumed thread for Java app

  - by Vincent Ma

  Following java code to emulate busy and Idle thread and start it. import java.util.concurrent.*;import java.lang.*; public class ThreadTest {    public static void main(String[] args) {        new Thread(new Idle(), "Idle").start();        new Thread(new Busy(), "Busy").start();    }}class Idle implements Runnable {    @Override    public void run() {        try {            TimeUnit.HOURS.sleep(1);        } catch (InterruptedException e) {        }    }}class Busy implements Runnable {    @Override    public void run() {        while(true) {            "Test".matches("T.*");        }    }} Using Processor Explorer to get this busy java processor and get Thread id it cost lots of CPU see the following screenshot: Cover to 4044 to Hexadecimal is oxfcc. Using VistulVM to dump thread and get that thread. see the following screenshot In Linux you can use  top -H to get Thread information. That it! Any question let me know. Thanks

  Read the article

• Nginx proxy to Apache - resolve HTTP ORIGIN

  - by Fratyr

  I have a server setup with nginx serving static content and proxy all PHP/dynamic requests to apache on 127.0.0.1 I'm building an API for my databases, and I need to allow clients by their origin (domain name), rather than just IP. Based on CORS rules. So when I send an HTTP header header("Access-Control-Allow-Origin: www.client-requesting.myapi.com"); from my API server, I have to tell it which origin I allow, otherwise client side requests won't work to my API due to same-origin policy. The question is how can I know which domain name (if any) called my API? What should be the nginx and apache configuration to pass the origin parameter? I tried to google, and all I found is some possible solution with mod_rpaf, but I wanted to be sure. Thanks!

  Read the article

• Nifty default controls prevent the rest of my game from rendering

  - by zergylord

  I've been trying to add a basic HUD to my 2D LWJGL game using nifty gui, and while I've been successful in rendering panels and static text on top of the game, using the built-in nifty controls (e.g. an editable text field) causes the rest of my game to not render. The strange part is that I don't even have to render the gui control, merely declaring it appears to cause this problem. I'm truly lost here, so even the vaguest glimmer of hope would be appreciated :-) Some code showing the basic layout of the problem: display setup: // load default styles nifty.loadStyleFile("nifty-default-styles.xml"); // load standard controls nifty.loadControlFile("nifty-default-controls.xml"); screen = new ScreenBuilder("start") {{ layer(new LayerBuilder("baseLayer") {{ childLayoutHorizontal(); //next line causes the problem control(new TextFieldBuilder("input","asdf") {{ width("200px"); }}); }}); }}.build(nifty); nifty.gotoScreen("start"); rendering glMatrixMode(GL_PROJECTION); glLoadIdentity(); GLU.gluOrtho2D(0f,WINDOW_DIMENSIONS[0],WINDOW_DIMENSIONS[1],0f); //I can remove the 2 nifty lines, and the game still won't render nifty.render(true); nifty.update(); glMatrixMode(GL_PROJECTION); glLoadIdentity(); GLU.gluOrtho2D(0f,(float)VIEWPORT_DIMENSIONS[0],0f,(float)VIEWPORT_DIMENSIONS[1]); glTranslatef(translation[0],translation[1],0); for (Bubble bubble:bubbles){ bubble.draw(); } for (Wall wall:walls){ wall.draw(); } for(Missile missile:missiles){ missile.draw(); } for(Mob mob:mobs){ mob.draw(); } agent.draw();

  Read the article

• including files in a symlink directory when backing up with duplicity

  - by Rob

  I'm backing up using Duplicity, great tool. I'm unable to include files in the backup that are within a directory that is a symlink. Using the following: duplicity <dup args> --include /var/www/**/current --exclude '**' duplicity will only backup the symlink I've tried: duplicity <dup args> --include /var/www/**/current/* --exclude '**' # and duplicity <dup args> --include /var/www/**/current/** --exclude '**' Not even then symlink is backed up. the "current" directory links to directory like: /var/www/host.com/de9f2c7fd25e1b3afad3e85a0bd17d9b100db4b3 The files contains a few static html & css files. I want those files to be backed up, regardless of which sha'd directory "current" points to. Any help appreciated.

  Read the article

• unreachable subnet in one direction

  - by Carl Michaud

  I'm unable to route traffic to a subnet in my home. Here's my topology: INET <- Router A <- Router B <- WIFI AP where: Router A - ARRIS TG862G/CT (from comcast) - WAN DHCP, LAN 10.0.0.99 Router B - Linksys WRT400N with DD-WRT - WAN 10.0.0.12 , LAN 10.0.1.1 I was able to use DD-WRT to configure a static route for the 10.0.1.x network back to the 10.0.0.x network. But I'm not sure if i can do the reverse on the ARRIS router and was looking for suggestions on how to fix that. I've set things up this wasy because I am using OpenDNS to mange internet content for my kids and of course I wasn't able to configure DNS to my liking on Router A either. So at present I'm using Router A on 10.0.0.x to provide a private unfiltered WIFI AP (no ssid broadcast) that I use for netflix only and then I use router B to provide a filtered WIFI AP for the rest of my WIFI devices on 10.0.1.x. However I would like to be able to connect to my 10.0.1.x devices from the internet via dynamic dns; but I can't see anything behind router B this way. Thoughts?

  Read the article

• Centralizing a resource file among multiple projects in one solution (C#/WPF)

  - by MarkPearl

  One of the challenges one faces when doing multi language support in WPF is when one has several projects in one solution (i.e. a business layer & ui layer) and you want multi language support. Typically each solution would have a resource file – meaning if you have 3 projects in a solution you will have 3 resource files.   For me this isn’t an ideal solution, as you normally want to send the resource files to a translator and the more resource files you have, the more fragmented the dictionary will be and the more complicated it will be for the translator. This can easily be overcome by creating a single project that just holds your translation resources and then exposing it to the other projects as a reference as explained in the following steps. Step 1 Step 1 -  Add a class library to your solution that will contain just the resource files. Your solution will now have an additional project as illustrated below. Step 2 Reference this project to the other projects. Step 3 Move all the resources from the other resource files to the translation projects resource file. Step 4 Set the translations projects resource files access modifier to public. Step 5 Reference all other projects to use the translation resource file instead of their local resource file. To do this in xaml you would need to expose the project as a namespace at the top of the xaml file… note that the example below is for a project called MaxCutLanguages – you need to put the correct project name in its place.   xmlns:MaxCutLanguages="clr-namespace:MaxCutLanguages;assembly=MaxCutLanguages"   And then in the actual xaml you need to replace any text with a reference to the resource file. <TextBlock Text="{x:Static MaxCutLanguages:Properties.Resources.HelloWorld}"/> End Result You can now delete all the resource files in the other projects as you now have one centralized resource file.

  Read the article

• Embedded Tomcat Cluster

  - by ThreaT

  Can someone please explain with an example how an Embedded Tomcat Cluster works. Would a load balancer be necessary? Since we're using embedded tomcat, how would two separate jar files (each a standalone web application with their own embedded tomcat instance) know where eachother are and let eachother know their status, etc? Here is the code I have so far which is just a regular embedded tomcat without any clustering: import javax.servlet.ServletException; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import java.io.File; import java.io.IOException; import java.io.Writer; public class Main { public static void main(String[] args) throws LifecycleException, InterruptedException, ServletException { Tomcat tomcat = new Tomcat(); tomcat.setPort(8080); Context ctx = tomcat.addContext("/", new File(".").getAbsolutePath()); Tomcat.addServlet(ctx, "hello", new HttpServlet() { protected void service(HttpServletRequest req, HttpServletResponse resp) throws ServletException, IOException { Writer w = resp.getWriter(); w.write("Hello, World!"); w.flush(); } }); ctx.addServletMapping("/*", "hello"); tomcat.start(); tomcat.getServer().await(); } } Source: java dzone

  Read the article

• Issue Connecting two home networks

  - by Alex

  Hi, I have a home networking question. I have two DLINK wireless/wired routers in my house, connected to the Internet ISP. There are a 2 computers on each of the two networks. Network1: has 192.168.0.0 (gateway) Valid IP'S range - 192.168.0.1 - 192.168.0.10, with COMP1 having a fixed IP of 162.168.0.1 Network2: has 192.168.0.100 (gateway) Valid IP'S range - 192.168.0.101 - 192.168.0.110 with COMP2 having a static IP of 162.168.0.101, a WIRELESS printer on 192.168.0.102 Both routers have a netmask of 255.255.255.0 My need is to connect the two routers, so that I can Remote desktop for COMP1 to COMP2 and viceversa, and COMP1 to connect to the wireless printer on Network2. can anyone help to set this up so that the both networks can talk to each other. Any help is appreciated. -Alex

  Read the article

• how to avoid flickering in awt [on hold]

  - by Ishanth

  import java.awt.event.*; import java.awt.*; class circle1 extends Frame implements KeyListener { public int a=300; public int b=70; public int pacx=360; public int pacy=270; public circle1() { setTitle("circle"); addKeyListener(this); repaint(); } public void paint(Graphics g) { g.fillArc (a, b, 60, 60,pacx,pacy); } public void keyPressed(KeyEvent e) { int key=e.getKeyCode(); System.out.println(key); if(key==38) { b=b-5; //move pacman up pacx=135;pacy=270; //packman mouth upside if(b==75&&a>=20||b==75&&a<=945) { b=b+5; } else { repaint(); } } else if(key==40) { b=b+5; //move pacman downside pacx=315; pacy=270; //packman mouth down if(b==645&&a>=20||b==645&&a<=940) { b=b-5; } else{ repaint(); } } else if(key==37) { a=a-5; //move pacman leftside pacx=227; pacy=270; //packman mouth left if(a==15&&b>=75||a==15&&b<=640) { a=a+5; } else { repaint(); } } else if(key==39) { a=a+5; //move pacman rightside pacx=42;pacy=270; //packman mouth right if(a==945&&a>=80||a==945&&b<=640) { a=a-5; } else { repaint(); } } } public void keyReleased(KeyEvent e){} public void keyTyped(KeyEvent e){} public static void main(String args[]) { circle1 c=new circle1(); c.setVisible(true); c.setSize(400,400); } }

  Read the article

• Laptops trying to connect via wireless? Only able to connect only via wired connection

  - by Chris J. Lee

  It seems that all the wireless laptops in the office have disconnected and are unable to reconnect to the wifi after a terrible storm caused some power interruptions. Troubleshooting actions Verify wireless broadcasting is up With each laptop i ended up flushing their dns cache on Win 7 (ipconfig /flush ) Performed an ipconfig /all to see what the new ip is Made sure password was correct Reset the router (multiple times) restarted each laptop. Tried connecting wirelessly Am i missing some small detail ? Network information The router is a linksys/cisco WRVS4400N router. Supports a lot of fancy features i don't know how to use. We have 3 static ip's the conference room computer, the wireless printer, my computer Mostly windows machines, we have 3 mac users

  Read the article

< Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >