Search Results

Search found 19382 results on 776 pages for 'multiple'.

Page 35/776 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

• How do you run XBMC on nvidia dual screen and stop it from taking over the keyboard and mouse?

  - by Paul Swartout

  I have set up dual screen under Ubuntu 12.04. I have a GeForce 8500 GT and have used the nVidia control panel to set up dual screen in "Separate screen mode". Here's the resulting xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:38:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Maxdata/Belinea B1925S1W" HorizSync 31.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor1" VendorName "Unknown" ModelName "CRT-1" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "CRT-1: 1280x768 +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-1: 1360x768_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection All well and good and I have a nice blank XWindow displayed on my TV (the 2nd monitor). I then fire up XBMC from a terminal on the PC monitor using DISPLAY=:0.1 xbmc XBMC fires up quite nicely on the TV however I can no longer use the main PC monitor / mouse / keyboard as XBMC on the TV screen seems to have focus. I was hoping to have XBMC running on the TV and let the kids use the MCE remote whilst I get on with my work on the PC monitor. Does anyone have any idea how to overcome this? I'm presuming there's some xorg.conf fun and games needed but I've no idea where to start to be honest.

  Read the article

• NVIDIA X Server TwinView isses with 2 GeForce 8600GT cards

  - by Big Daddy

  Full disclosure, I am relatively new to Linux and loving the learning curve but I am undoubtedly capable of ignorant mistakes I have a rig I am building for my home office desktop. The basics: Gigabyte MB AMD 64bt processor Ubuntu 12.04 64bit two Nvidia GeForce 8600GT video cards using a SLI bridge two 22" DVI input HP monitors So here is my issue (it is driving me nuts) with X Server. If I plug both monitors into GPU 0 X Server auto configures TwinView and all is grand, works like a charm, though both are running off of GPU 0. If I plug one monitor into GPU 0 and one monitor into GPU 1, X Server enables the monitor on GPU 0, sees but keeps the monitor on GPU 1 disabled. My presumption (we all know the saying about presumptions) is that all I would have to do is select the disabled monitor on GPU 1 and drop down the Configure pull down and select TwinView...problem is when the monitors are plugged in this way, the TwinView option is greyed out and can not be selected. What am I not understanding here? Is there some sort of configuration I need to do elsewhere for Ubuntu to utilize both GPU's? Any help will be most appreciated, thanks in advance.

  Read the article

• Why are notifications appearing in the invisible black zone above my monitor ?

  - by Capt.Nemo

  I've got two monitors, with the right side one being slightly lower in the display settings. However any notifications I receive from notify-osd (including pidgin, notify-send etc) are sent to the top-most part of the right monitor screen, which results it in being invisible. And here's a pic of my monitor preferences : I'd earlier used the Wallpaper plugin in compiz to stitch my desktops, and then uninstalled compiz-extras. I'm using Ubuntu 11.04 in classic mode.

  Read the article

• Workspeace view shows first workspaces out of border at left

  - by Jeremi Roivas

  I am using nvidia-current and edited from settings my monitors so that my second monitor is at left and unity-panel shows only in my main monitor. How ever now the workspaces images have shifted so that second monitor first workpsaces are moved out of the left border and when the monitor is not turn on I can't see the the workspaces there. Sometimes programs have been moved when monitor is been flashed to the workspace shown in out of border and I have no means to move the program windows into my main workspace views. Image: http://but.fi/2em As you see the second monitor works as it should work but my main monitor is fooked. Is this possible way to fix this some how?

  Read the article

• how to setup duel monitors an xorg.conf

  - by MrMonty

  # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" # Removed Option "Xinerama" "1" # Removed Option "Xinerama" "0" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-1: 1280x1024 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0; DFP-1: 1280x1024_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection thats my file!

  Read the article

• Ubuntu 12.04 Touchscreen Calibration

  - by Lee

  I have a machine with Ubuntu 12.04 installed, with dual monitor, via VGA and DVI Interface. The monitor is one touch screen and the other one is regular LCD Monitor. The touch screen is made in China with some unknown brand, and I am using eGalax Driver. The touch screen is now detected and works, but i need to do some calibration since it does not correctly perform click on touch. The problem is, when I’m using xinput_calibrator, it shows 4 crosses to be clicked on, because I’m using dual monitor, the crosses is now show 2 on the touch screen (touchable) and the others on the other monitor which is regular non-touch monitor. Please help, thank you.

  Read the article

• My msi gtx460 video card and nvidia problems

  - by Rik

  I am trying to convert to ubuntu completely but my problems lies here, I install the os and the main monitor works fine, but the secondary monitor? blank.. is there any help with this? I know the os has problems with Nvidia stuff but if i can get the dual screens working, that is one thing out of the way. I have read and tried post "Ubuntu 12.04 Nvidia GTX 460 video card installation" and failed so hard i have to format and start over. Thanks!

  Read the article

• Dual monitors with one above the other?

  - by Felix

  I'm using Gnome 3 and proprietary Nvidia drivers. I have tried to set in nvidia-settings my external monitor to be "above" my main one (it's a laptop). However, when I try to drag a window up from the main display to the external one, it gets stuck and can't move past a certain point. Trying to maximize it changes its decoration so it looks maximized (i.e. no borders, etc), but its size or position doesn't change. Now, if I set my external monitor to be "to the left" of the main one, it works, which is why I'm suspecting this is a Gnome issue, not an Nvidia one. Anyone know how to fix this? Update: some versions: Gnome: 3.2.2.1 Nvidia: 280.13 Update 2: I can see that Gnome 3.4 is out, and among the release notes is better external monitor support. However, they only mention a small fix that is unrelated to my problem. Can anyone with Gnome 3.4 and access to an external monitor please test this out and tell me if it works? I don't want to go through the hassle of upgrading my Ubuntu installation unless I know for certain it's going to fix the problem.

  Read the article

• How can I use two video cards to power three screens?

  - by notatoad

  I have two Radeon 6450 graphics cards in my computer, with three screens. Only the screens plugged into the first graphics card are recognized and configurable in the displays setting panel. How can I use the displays plugged into my second graphics card? Both cards are present in lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc NI Caicos [AMD RADEON HD 6450] 01:00.1 Audio device: ATI Technologies Inc NI Caicos HDMI Audio [AMD RADEON HD 6450] 02:00.0 VGA compatible controller: ATI Technologies Inc NI Caicos [AMD RADEON HD 6450] 02:00.1 Audio device: ATI Technologies Inc NI Caicos HDMI Audio [AMD RADEON HD 6450] I'm using the open source driver instead of the proprietary driver because the proprietary driver won't output 1440x2560.

  Read the article

• How exactly to implement multiple threads in a game

  - by xerwin

  So I recently started learning Java, and having a interest in playing games as well as developing them, naturally I want to create game in Java. I have experience with games in C# and C++ but all of them were single-threaded simple games. But now, I learned how easy it is to make threads in Java, I want to take things to the next level. I started thinking about how would I actually implement threading in a game. I read couple of articles that say the same thing "Usually you have thread for rendering, for updating game logic, for AI, ..." but I haven't (or didn't look hard enough) found example of implementation. My idea how to make implementation is something like this (example for AI) public class AIThread implements Runnable{ private List<AI> ai; private Player player; /*...*/ public void run() { for (int i = 0; i < ai.size(); i++){ ai.get(i).update(player); } Thread.sleep(/* sleep until the next game "tick" */); } } I think this could work. If I also had a rendering and updating thread list of AI in both those threads, since I need to draw the AI and I need to calculate the logic between player and AI(But that could be moved to AIThread, but as an example) . Coming from C++ I'm used to do thing elegantly and efficiently, and this seems like neither of those. So what would be the correct way to handle this? Should I just keep multiple copies of resources in each thread or should I have the resources on one spot, declared with synchronized keyword? I'm afraid that could cause deadlocks, but I'm not yet qualified enough to know when a code will produce deadlock.

  Read the article

• Resolution changes when using switch

  - by Edward D

  So, the "real" resolution of my monitor is 1024x768. That's what I'd use on my docked Windows laptop, and what I'd use on my Xubuntu desktop connected directly. When I connect a switch, to switch between the two, however, the ubuntu machine's resolution changes. Everything's still proportional, and it still thinks it's doing 1024x768, but the icons and fonts appear larger. Not 800x600 larger, but still big. When I used Xubuntu Precise, I created an xorg.conf file to set a resolution of 1280x1024 which made it look the way it does without the switch ... as a workaround. When I upgraded to Trusty, I lost this. I tried to re-create it, but doesn't seem to load my file. Ideally, I'd like to correct the original problem, but I'd settle for being able to up the resolution. I searched for a while, and tried to do it, but I'm giving up ... please help me out. Controller: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04) Monitor: NEC MultiSync LCD 1850e http://www.necdisplay.com/documents/UserManuals/LCD1850E_manual.pdf OS: Xubuntu 14.04 Trusty /etc/X11/xorg.conf: # YOU CREATED THIS FILE # sudo leafpad /etc/X11/xorg.conf Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "NEC LCD1850E" # I found Synchronization Range at: # http://www.necdisplay.com/documents/UserManuals/LCD1850E_manual.pdf HorizSync 31.0-82.0 VertRefresh 55.0-85.0 EndSection Section "Screen" Identifier "Default Screen" Monitor "NEC LCD1850E" Device "Configured Video Device" SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1024x768" "800x600" "848x480" "640x480" EndSubSection EndSection

  Read the article

• Not Quite Multiseat

  - by user2773520

  I am attempting to create a pair programming environment sort of set up like multiseat: https://help.ubuntu.com/community/MultiseatX[1] or https://help.ubuntu.com/community/MultiseatOneCard[2] (as the standard issue boxes only have one graphics card) The thing is, I only want one login session, just with 2 monitors, keyboards, and mice. As well as having 2 active applications (so 2 people can be typing independantly). They should ideally be able to mouse over and click & type in the other persons monitor, as well as move windows between the montors. Does anybody know of anything like this that will work? We are running Ubuntu 12.04.

  Read the article

• How do I make my monitors show up as two separate monitors? - NVidia GeForce GTX 550 ti

  - by BriGuy92

  I've got a dual-monitor setup, with the monitors configured through the "Nvidia X Server Settings" application. In the Ubuntu Display settings, the monitors show up as one extra-wide monitor labelled "Laptop". Until now, this really hasn't been a problem, but now I'm trying to set up a Wacom tablet. The Ubuntu tablet settings allow the tablet to be mapped to a specific monitor, but since the OS "thinks" that I have only one monitor, I can only map the tablet to both of them. This is a problem. Is there any way to have Ubuntu recognize the monitors separately?

  Read the article

• Why does Unity not extend to my 2nd monitor, even when it is displaying an X-Screen?

  - by Gridwalker

  I recently added a 2nd video card to my system, but unity refuses to extend my desktop over to the second screen. Although the secondary monitor initialises when I boot and I can move the mouse cursor over to the 2nd screen, the screen is otherwise blank (showing no wallpaper or interface elements) and I am unable to move any windows to this monitor. Moving the mouse cursor over to the 2nd monitor changes it from the default cursor to the old-style X cursor, such as the one that appears when you run X-kill, indicating that this screen is initialised in the X Server but that Unity is not recognising it. Although the Nvidia X Server Settings application can see both monitors, the unity systems settings application does not detect the 2nd adapter. Sometimes the additional drivers application can see both adapters, but it doesn't consistently show options for them both. Xrandr also fails to detect the 2nd monitor, but iNex lists both adapters. I have experimented with several different drivers for each adapter and with setting each of the graphics cards as the primary adapter in the BIOS, but this has made little difference. The two adapters are an onboard Geforce 8200 and a PCIE Geforce 7200 GX. The onboard adapter is currently set as the primary, however this adapter crashes whenever I use the Nouveau driver and I have to switch over to the PCIE as a primary whenever I purge the proprietary drivers (switching back when the 304 driver has been reinstalled). It doesn't matter which adapter I set as my primary, the results are the same : one screen showing the unity interface and one screen showing an X-Screen that only displays the mouse cursor. All I want is to be able to run this system in a dual screen configuration. I am not a gamer, nor do I require 3D rendering capabilities. Anything you can suggest to get the desktop to extend across both screens will be massively appreciated!

  Read the article

• Cannot use second display with 12.04 and Intel 2000/3000

  - by Carolyn Marenger

  I am unable to get anything to display on my second monitor, or even get the system to recognize that there is a second screen. I am running Ubuntu 12.04 on a Gigabyte GA-H61M-S2PV, revision 2.0 box. The integrated chipset is an Intel 2000/3000, and there are both a D-Dub and a DVI-D display ports on the MB. This is the first operating system I have installed on this system. I have a second monitor plugged into the DVI-D port via a DVI-D to D-Sub adapter. I cannot verify that the motherboard or adapter were/are working, short of installing windows to test the theory. When I go into the "System Settings - Displays" control window, it shows one display. I have rebooted with the second monitor attached, and I have perused the BIOS settings in case it might have been disabled. So far, I have had no indication that the second monitor is recognized, not even a flicker at power on. If I swap monitors and cables between the DVI-D and D-Dub ports, the other monitor lights up, so I know the monitor and video cable are not the issue. Any suggestions would be appreciated. Thanks, Carolyn

  Read the article

• Can't set proper resolution with a Geforce 520

  - by D0X

  I installed the 12.04 LTS but cannot get my two monitors working. The latest nvidia-current drivers installed, but i just cant set proper resolution. My card is a geforce 520 1 DVI 1 VGA. With the nvidia drivers installed i can set the DVI monitor to 1600x1200 but the VGA no further than 1360x768 (with nvidia-settings). Without the nvidia driver (using the nouveau) it doesn't work either. This same issue i had with 11.10 and i had high hopes for 12.04.

  Read the article

• How do I get one monitor on top of the other in Ubuntu 10.10?

  - by Jan

  I'm using a laptop and a monitor (wall mounted) over my laptop. I would like to reflect this physical hardware setup in my software screen setup. So that I can move my mouse upward, out of my laptop screen and use the monitor on the wall. I have been searching for a solution for a while, and I hope somone can help me out. I'm using Ubuntu 10.10 "out of the box". Side by side screen setups works just fine, over/under is doesn't work.

  Read the article

• Dual Frame Buffer on Ubuntu 12.04 Intel HD Graphics 4600 i7-4770

  - by user3692512

  I have 2 monitors connected to the PC, one in HDMI, one in DVI. I have Intel integrated graphics HD4600 Now as far my understanding, both the monitors is connected at the same framebuffer /dev/fb0 How can I detach them and create 2 frame buffers at startup, so that I can directly write to the second monitor, by writing on the /dev/fb1, and not hamper the /dev/fb0, so that x-server can run normally on that?

  Read the article

• Enabling a multi display desktop completely broke Gnome Shell. Help?

  - by Chintan Parikh

  I've been trying to get my dual desktops working on Ubuntu for a while. I previously had them as one large desktop, but that was incredibly slow for some reason. I tried to switch them to multi display desktop on the AMD Catalyst Control Center. Here's what I get after restarting and logging in: http://i.imgur.com/SEjgU.png I'm running an AMD Quad Core A6, AMD Radeon 6540G2 GPU, 16GB Ram. Ubuntu 12.04 Any ideas?

  Read the article

• Automatically move Xubuntu panel to external monitor

  - by user1291235

  I am using xubuntu 13.04 with a dualmonitor setup. (external monitor as primary, laptop als secondary) I am using xandr to makeup my monitorsetup. However I recognized that the xubuntu panel on the top by default will always be placed on the laptop monitor. I know that i can move the panel via the panel preferences. This works. But i want to somehow either let it move automatically to the right monitor (the primary one) or to move it with a terminal command (so i can create a script which takes care of moving the panel to the primary monitor)... any ideas?

  Read the article

• proper way to creation multiple similiar buttons/panels

  - by JayAvon

  I have the below Code which i tried to do, but it only shows(the minus/plus button) on the last GirdLayout (Intelligence stat): JButton plusButton = new JButton("+"); JButton minusButton = new JButton("-"); statStrengthGridPanel = new JPanel(new GridLayout(1,3)); statStrengthGridPanel.add(minusButton); statStrengthGridPanel.add(new JLabel("10")); statStrengthGridPanel.add(plusButton); statConstitutionGridPanel = new JPanel(new GridLayout(1,3)); statConstitutionGridPanel.add(minusButton); statConstitutionGridPanel.add(new JLabel("10")); statConstitutionGridPanel.add(plusButton); statDexterityGridPanel = new JPanel(new GridLayout(1,3)); statDexterityGridPanel.add(minusButton); statDexterityGridPanel.add(new JLabel("10")); statDexterityGridPanel.add(plusButton); statIntelligenceGridPanel = new JPanel(new GridLayout(1,3)); statIntelligenceGridPanel.add(minusButton); statIntelligenceGridPanel.add(new JLabel("10")); statIntelligenceGridPanel.add(plusButton); I know I can do something like I did for the Panel names(have multiple ones), but I did not want to do that for the Panels in the first place. I am trying to use best practice and not have my code be repetitive. Any suggestions?? The goal is to have 4 stats, to assign points to, with decrement and increment buttons(I decided against sliders). Eventually I will have them have upper and lower limits, decrement the "unused" label, and all of that good stuff, but I just want to not be repetitive. Thanks for any help.

  Read the article

• Ubuntu 12.04 Freezes after removing the HDMI cable or changing settings

  - by euDennis

  I'm using an fresh install of Ubuntu 12.04 and I'm having some problems with HDMI. I usually use it with my TV, but since the update isn't working any more. Sometimes in 11.10 I had to execute a script to get the video and sound to work in HDMI, but it was OK. Since the update, when I connect the HDMI cable, it works, but if I make any change in the display settings (like resolution, monitor position, etc,) it freezes. And if I don't change anything, it's working in both monitors, but when I remove the cable, it freezes and even the ctrl+alt+f2 shortcut works. Any ideas for fixing this? I Googled and only found many people having problems, usually with sound.

  Read the article

• Sys.WebForms.PageRequestManagerServerErrorException: An entity object cannot be referenced by multiple instances of IEntityChangeTracker [closed]

  - by Mingebag

  `Story: I have a strange error when I try to save something I got this error message An entity object cannot be referenced by multiple instances of IEntityChangeTracker. I really don’t know what that is and why is it appear, it appears only when I try to save something my insert and update is working, only when I try to save something in db from my Telerik grid if (this.annualVacationList != null) { List<AnnualVacation> vacationToSave = this.annualVacationList; IEnumerable<AnnualVacation> existing = paramUser.AnnualVacations; foreach (AnnualVacation toSave in vacationToSave) { AnnualVacation existingItem = existing.Where(x => x.AnnualVacationId == toSave.AnnualVacationId).SingleOrDefault(); if (existingItem == null) { ctx.AddToAnnualVacations(toSave); } else { existingItem.FromDate = toSave.FromDate; existingItem.ToDate = toSave.ToDate; existingItem.WorkingTime = toSave.WorkingTime; existingItem.VacationDays = toSave.VacationDays; } } } ctx.SaveChanges(); } After debugging I have seen that the code brake down in the Project.Name.Designer.cs ..... O.o public void AddToAnnualVacations(AnnualVacation annualVacation) { base.AddObject("AnnualVacations", annualVacation); }

  Read the article

• How do I reset my display settings from the command line?

  - by Trevor

  I'm running 12.10 on a dell e5400 laptop and I used xrandr to get the dual monitors working that I connect through a laptop dock. I used xrandr again to switch back to the laptop display when I undocked. The problem is, after a restart, the laptop seems to want to come back up with the dual monitor configuration and the laptop screen stays blank. I can boot into single user mode but I'm not sure what to do from there to get the display settings reset. Any ideas? There's no xorg.conf file so I'm not sure where the settings are stored anymore. Thanks.

  Read the article

• T420 Triple Head with Optimus

  - by Rolo

  I see that this is possible on a T520 apparently (Triple-head on a Lenovo T520), but I can't see anyone claiming it's possible on a T420. I'm running 12.04 and have Bumbleebee installed and working fine but I can't get the display port monitor to display anything. The power light flicks on, but things only render on my VGA output monitor, and Ubuntu's display settings don't detect the third monitor. I'm not concerned with power management, ie, am happy to leave set on discrete graphics in the BIOS if that helps. Is this possible? Thanks.

  Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >