Search Results

Search found 16218 results on 649 pages for 'compiler errors'.

Page 350/649 | < Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >

• PC wont boot with more than 1 stick of RAM.

  - by Aidan

  Hi Guys, I've got the following computer and I've just put in a new CPU QX9650 and I've run into this problem since making this hardware change. Whenever I put more than 1 of my 4 sticks of ram into my machine it wont load an OS. It'll go through the BIOS but BSOD on windows load. It also wont let me install an OS from disk or boot into Linux. I've ran memtest with all 4 sticks in and I get 10k+ errors on test5. Each stick of ram on it's own is fine and functions properly. I only have problems when all 4 sticks are in the machine at the same time. System specs.. CPU: QX9650 Mobo: Asus P5B 2104 BIOS RAM: 2xPC25400 DDR2 , 2xPC2 6400 both OCZ. Is the problem on my end or is the CPU faulty?

  Read the article

• Remote access not working without connected monitor

  - by winSharp93

  I am trying to configure a Windows Server 2008 as a Home Server for my personal use (mainly for storing documents, hosting source-control, etc.). The "server" consists of an Intel Atom 2700DC board and an Intel SSD. Configuring remote access to the server, I am confronted with a very strange problem: As long as a monitor is connected to my server, remote access works without any problems. However, when no monitor is connected at boot-time, remote access simply won't work (I keep getting errors when trying to connect that the remote server was not found or that remote access is disabled). Windows definitely boots when no monitor is connected as I receive a message asking me whether to enter safe mode when booting after powering the server down by plugging the power cord. When I plug in a monitor after boot, it stays turned off and remote desktop connections still fail. Do you have any ideas about what I could try?

  Read the article

• auspex LFS backups

  - by user1250465

  I have some backup tapes which existed on an AUSPEX file server. The backups were written to tape with the SunOs version of the CPIO command. Now that I need to restore them, (of course there are no more auspex servers in existance), the backups won't restore because the headers are not standard. I have dumped the tape images to disk. PAX, CPIO, and TAR cannot read the images. I've tried all of the CPIO format options. The errors I get are "name too long", "byte swapped in header", or just junk output. I can open up the images and read the contents of the files, but cannot restore the images. I have found that SunOs had a special header in CPIO V2.5 images. I have found the source for cpio, now I need definition of the SunOs header inside CPIO?

  Read the article

• Make Windows Task Scheduler alert me on fail

  - by acidzombie24

  I have an automated script that pulls backups from my website to my local computer. Once my server was down, another time i accidentally move my script. How do i make Windows Task Scheduler tell me with the script fails (or doesnt run/not found)? I dont care if a prompt comes up, an email or something that appears on my desktop. I want to be notified if something goes wrong. On my server crontab emails me about errors which is great. I want something like that on my windows 7 local computer.

  Read the article

• PHP failing to connect to GMail via IMAP [Edited!!]

  - by Alexander

  I have some php code that I'm trying to use to connect to gmail using imap. Here's the code: $hostname = '{imap.gmail.com:993/imap/ssl/novalidate-cert}INBOX'; $tmp_username = 'username'; $tmp_password = 'password'; $inbox = imap_open($hostname, $username, $password) or die(imap_last_error()); And I get this error output everytime i try to connect: Warning: imap_open() [function.imap-open]: Couldn't open stream {imap.gmail.com:993/imap/ssl/novalidate-cert}INBOX in /var/www/PHP/EmailScript.php on line 14 Login aborted I dont understand what could be wrong!! I've heard of people having SSL errors but this doesnt seem to be one of those. Please please please help me!!!!! Edit: When trying to connect to imap.gmail.com through telnet-ssl i get the following output: Trying 74.125.155.109... Connected to gmail-imap.l.google.com. Escape character is '^]'. And Nothign else happens

  Read the article

• Windows7 - Mouse not working, all windows + tray act like inactive

  - by Teo.sk

  I have this problem for two days now. First when it happened, logging out and back in helped, but now this occurs right after booting. I cannot activate any window by clicking into it, and also cannot minimalise, or close it with mouse. In few applications I cannot even interact with them with mouse (e.g. clicking on links in browser). I can scroll an active window with the trackball, and sometimes everything works normally for a little while. Everything works fine, when I use keyboard for this, I can resize, move, close windows with keyboard shortcuts, etc. I ran a complete Avast! scan, but it found nothing important. Also event viewer did not show any relevant errors. Here's a log from HijackThis if it helps anything.

  Read the article

• Installing Java 6 on Ubuntu 10.04 fails on missing Java 6 JRE package

  - by David S

  I'm trying to install Java 6 on Ubuntu 10.04 and it's been harder than it should be. In another question about installing Java on Ubuntu/Linux it said that I needed to do the following: sudo add-apt-repository "deb http://archive.canonical.com/ lucid partner" However, that failed and I kept getting: sudo: add-apt-repository: command not found The solution to this, was to run: sudo apt-get install python-software-properties So, that seemed to work and the command above to "add-apt-repository" seems to complete with no errors. And I have run the following to confirm it got added. sudo vi /etc/apt/sources.list But, now when I run the following: sudo apt-get install sun-java6-jre I get: Reading package lists... Done Building dependency tree Reading state information... Done Package sun-java6-jre is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package sun-java6-jre has no installation candidate Where do I go from here?

  Read the article

• SugarCRM CE Won't Install on Ubuntu 10.10

  - by Trenton Scott

  I have a fresh copy of Ubuntu 10.10 server with a working LAMP installation. I downloaded SugarCRM and browsed to its directory to open the installer (via Firefox). The installer appears fine, I accept the license agreement, and it proceeds to check file permissions. It advises that several directories need looser permissions (chmod 766), and I adjust them accordingly. After making the changes, I click "recheck" and the page just reloads as blank (white). There are no errors visible, nothing in the server logs (Apache/PHP) and installation cannot continue. I'm able to get back to the installation tool by readjusting permissions back to my default (0755 for directories, 0644 for files). All files/folders are owned by root and the www-data group. Any idea about what's wrong?

  Read the article

• Windows Azure openSUSE: rcnetwork not starting

  - by djechelon

  I have a Linux VM in Azure, created from their default image. My problem is simply that the init script network doesn't look like to start, so dependent services (apache, postfix...) won't start. If I run yast runlevel and try to start postfix it asks me to start network first: if I accept, network is started without errors and then postfix is started. While network is configured to start on boot, it just doesn't appear to have started. Anyway, SSH connections work fine. Currently, I had to edit my init scripts and remove network from the Required-Start list, but that didn't work for posftix (even after running systemctl --system daemon-reload). How can I fix all this?

  Read the article

• Windows 7, files reappear after deletion.

  - by HeavyWave

  I'm trying to delete some files from a folder. I've taken ownership of the files and the folder. When I delete these files Windows doesn't report any errors and deletes them. BUT, after I press F5 these files reappear again. There are no messages whatsoever, they are just undeletable. I know login off will help, but how do I fix it without going through the pain of closing everything down? P.S. Files disappear from the folder after aprox. 5 minutes. Update. Turns out my version of Windows did not properly upgrade from test version, so it had some weird disk drive issues.

  Read the article

• Error When Trying to Exchange Encrypted Emails with Sender Outside Domain

  - by LucidLuniz

  I have an end user who is trying to exchange encrypted messages with a person outside of our company domain. When receiving emails from the user they receive a message that says: Signed By: (There were errors displaying the signers of this message, click on the signature icon for more details.) However, when you click on the signature icon it says: The digital signature on this message is Valid and Trusted. Then when you look at the "Message Security Properties" it shows two layers, each with a green checkmark beside them. The layers are presented as below: Subject: Digital Signature Layer It also has: Description: OK: Signed message The end result with all of this is that when the user on my side tries to send this user an encrypted message it says: Microsoft Outlook had problems encrypting this message because the following recipients had missing or invalid certificates, or conflicting or unsupported encryption capabilities: Continue will encrypt and send the message but the listed recipients may not be able to read it. However, the only options you are actually given is "Send Unencrypted" and "CanceL" (Continue is grayed out). If anybody can assist I would greatly appreciate it!

  Read the article

• How to use wget to grab copy of Google Code site documents?

  - by Alex Reynolds

  I have a Google Code project which has a lot of wiki'ed documentation. I would like to create a copy of this documentation for offline browsing. I would like to use wget or a similar utility. I have tried the following: $ wget --no-parent \ --recursive \ --page-requisites \ --html-extension \ --base="http://code.google.com/p/myProject/" \ "http://code.google.com/p/myProject/" The problem is that links from within the mirrored copy have links like: file:///p/myProject/documentName This renaming of links in this way causes 404 (not found) errors, since the links point to nowhere valid on the filesystem. What options should I use instead with wget, so that I can make a local copy of the site's documentation and other pages?

  Read the article

• How do I use memmap to reserve memory on boot?

  - by alexl

  Ive got a laptop with some corrupted ram addresses, so I'm trying to use memmap to reserve them before linux boots up. Ive been trying to use memmap=10M$1024M' as a kernel boot option, but linux crashes (with no errors) and restarts. If I use a different syntax for memmap likememmap=1023M@0M` it boots fine. Do I have to specify a certain size block to reserve or could my kernel version not support reserving memory with memmap? Maybe I'm better off using memmap=exactmap, and if so, could somebody point me to a good faq on how to use it?

  Read the article

• VMWare Converter recommendations

  - by Tank Szuba

  I have two Ghost 14 backups of my machine. One for the machine fully configured with apps after and XP install and one of the last update before i re-imaged it (it's XP, I re-image about once every six months). I recently wanted to try simply using my initial image in a virtual environment to do my testing that generally causes me to need to re-image. I used the VMWare converter to convert the Ghost images to a virtual machine to use in Virtual box but they fail to properly boot. They get stuck after the bios loads and windows begins loading. If I power down the machine and refire it it will go to the error screen in windows that asks if you would like to boot to a different mode. none selected make any difference. What are some possible errors I should look for in the conversion process or in my settings for the converter?

  Read the article

• Server 2003 answers ping, but wont serve http, ftp,smtp or pop3

  - by Manfred

  After reboot, my server wont respond to any incoming request until it is rebooted again. Then, about 5-6 hrs later, any website on it will return a ping, but it will not serve the page, nor will it serve ftp, pop3 or smtp requests. The System log shows W3SVC errors 1014 and 1074, which relate to an Application pool not replying; I have one phpAdmin app pool which I have stopped - it is showing a solitary website as the default App, but the server no longer serves php extensions, and I can't transfer the default website to another pool to kill the whole app pool. I would appreciate your help.

  Read the article

• Installed Java 7, but terminal still shows Java 6

  - by chipbk10

  I've installed Java 7 on my Mac (10.7.5), but in the terminal there is still java 6. java version "1.6.0_37" Java(TM) SE Runtime Environment (build 1.6.0_37-b06-434-11M3909) Java HotSpot(TM) 64-Bit Server VM (build 20.12-b01-434, mixed mode) There will be no problem with the version 6 on terminal, if I always got that errors when I tried to install a java application (LatexDraw): : CGContextGetCTM: invalid context 0x0 : CGContextSetBaseCTM: invalid context 0x0 : CGContextGetCTM: invalid context 0x0 : CGContextSetBaseCTM: invalid context 0x0 The problem is related to instability of java 6 inferred from this link I've read this installed-java-7-on-mac-osx-but-terminal-is-still-using-version-6 and also try to change my Java version by using export JAVA_HOME="/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home", but in my folder /System/Library/Frameworks/JavaVM.framework/Versions, there is no version 1.7, only versions under 1.6 ??? So, how can I fix this issue?

  Read the article

• IIS 7 throws 401 responses on application whose physical directory has been shared

  - by tonyellard

  I have an IIS 7, Windows Server 2008 R2 box with a relatively fresh install. I've deployed a .NET 2.0 application using windows autentication to the server, and from the default website, added it as an application. I updated the IIS authentication to enable Windows Authentication. When I went to share out the physical directory for the application so that a developer could deploy updates, the users began to receive 401 errors. I can reliably recreate the issue by sharing out the directory of any newly created application. The IIS user has the necessary read/write access to the directory. What do I need to do to keep web users from receiving 401's while at the same time allowing this developer to have access to the physical directory for deployments? Thanks in advance!

  Read the article

• 'server was unable to allocate from the system nonpaged pool' error

  - by cop1152

  Currently users at my company are unable to access their home folder (or any folder on our domain controller). I am working remotely and cant physically access the machine until tomorrow morning, but I can access it with RDC. When I attempt to ping other machines on our network from the machine in question (connected with RDC), I immediately get the error PING: transmit failed. error code 1450. Event Viewer is full of 2019 errors: The server was unable to allocate from the system nonpaged pool because the pool was empty Does anyone have experience with this specific issue? I have found some info with Google, but would like to hear what the pros at SF have top say. This is a Windows 2000 server.

  Read the article

• I need to access another user's files.

  - by CDeanMartin

  My system is an HP netbook running Ubuntu 10 netbook edition from a USB drive. I created an admin account and user account, and left in place the 'ubuntu' account. My netbook came with Windows 7 factory loaded and I did some work in Windows before setting up Linux. I copied my work into the HP Tools FAT32 partition that also came Factory Loaded, and was only 20% full. Only the 'ubuntu' account shows the HP Tools partition. So I would like to either view the partition from the 'admin' or 'user' accounts, or copy files from the partition-to a folder accessible from admin or user. I have already tried right clicking the folder, selecting share, and installing the share package, but I got a string of errors and would prefer a short term, one time solution that does not involve installing the share package. All I need is a few plain text Windows files i was working on.

  Read the article

• Resize ntfs system partitions with GParted?

  - by ane

  Trying to resize 2 ntfs system and boot partitions (windows 2003 server) using GParted. Goal: Resize D: (/dev/sda1) to ~850G - this is the boot drive with D:\ntldr, boot.ini, etc. Resize C: (/dev/sda5) to 100G - this is the system drive with C:\windows Tried resizing /dev/sda5 first and got the chkdsk error shown in screenshot #2. (You must run chkdsk /f). Have already run chkdsk /f on C: multiple times with no bad sectors or errors found. Have also run multiple chkdsk /f's on the underlying hard disk multiple times and rebooted way more than a couple times with the same error. How do you force gparted to ignore this error and resize? I found there is --force option to ntfsresize but don't know how to get the GParted ISO live CD to use it. How do you move the unallocated space so an extra ~750G is to the right of /dev/sda1 (D:), and an extra 10G to the right of /dev/sda5 (C:)

  Read the article

• How do I change the default browser in lotus notes when opening links in emails?

  - by peter

  I can't seem to figure out how to change the default browser for email/sametime links from opening with lotus notes to say chrome/firefox/ie. All links open with a new tab in lotus notes, which always gives scripting errors as it appears to be using ie as it's rendering engine to open up webpages. Is there something in the preferences that I'm missing that I'm not seeing? I've hunted around for awhile and am not seeing an option to change it. I've also tried to change it within the internet options for default applications, but nothing's working. I'm using lotus notes 8 on windows xp if that helps anyone helping me.

  Read the article

• Why does m4 error "linux-gnu.m4 - No such file or directory" appear the first time after updating sendmail.mc?

  - by Mike B

  SendMail 8.14.x | CentOS 5.x I've noticed that if I manually update /etc/mail/sendmail.mc (for example, enable TLS support), and then bounce sendmail, I get the following error: Shutting down sm-client: [ OK ] Shutting down sendmail: [ OK ] Starting sendmail: sendmail.mc:18: m4: cannot open `/usr/share/sendmail-cf/ostype/linux-gnu.mf': No such file or directory [ OK ] Starting sm-client: [ OK ] This only happens one time after I update a sendmail.mc file. If I bounce sendmail again (without making any other change), I don't see the error any more. Any idea why this happens? It doesn't cause any errors - I'm just curious.

  Read the article

• MacOS X 10.6 Portable Home Directory sync fails due to FileSync agent crashing

  - by tegbains

  On one of our cleanly installed MacPro machines running MacOS X 10.6.6 connected to our MacOS X 10.6.6 Server, syncing data using Portable Home Directories fails. It seems to be due to the filesync agent crashing during the home sync. We get -41 and -8026 errors, which we are suspecting are indicating that there is too much data or filesync agent can't read the files. The user is the owner of the files and can read/write to all of the files. < Logout 0:: [11/02/04 13:10:42.751] Error -41 copying /Volumes/RCAUsers/earlpeng/Library/Mail/Mailboxes/email from old imac./Attachments/12081/2.2. (source = NO) < Logout 0:: [11/02/04 13:10:42.758] Error -8062 copying /Volumes/RCAUsers/earlpeng/Library/Mail/Mailboxes/email from old imac./Attachments/12081/2.2/[email protected]. (source = NO) < Logout 1:: [11/02/04 13:10:42.758] -[DeepCopyContext deepCopyError:sourceError:sourceRef:]: error = -8062, wasSource = NO: return shouldContinue = NO

  Read the article

• Does CPIO produce platform dependant archives?

  - by TiCL

  I made a CPIO archive with following command on Solaris 11 (SPARC): find . | cpio -ov >/tmp/myarchive.cpio I copied it to Intel based Solaris 11 machine and tried to extract using the following command cpio -icvdu < myarchive.cpio It gives me following error: cpio: Not a cpio file, bad header. 1 errors The MD5SUM hash matches and I can extract it on another SPARC machine. My question, does CPIO produce platform dependant output? Is there any way to convert it? I cannot use TAR at this moment, because the directory I am archiving has long symbolic links that are skipped by TAR command

  Read the article

• How do I set "MaxPermSize" for Atlassian Fisheye/Crucible running as service on Win2k3?

  - by Jeremy

  I have been trying to setup Atlassian Fisheye/Crucible as a service on Win 2K3 R2 for two weeks. I keep getting various "java.lang.OutOfMemoryError: PermGen space" errors, which crash Fisheye and force me to restart the service. I've followed the example on the Atlassian support site to configure MaxPermSize within the service wrapper. However, when I check SysInfo inside the Fisheye Admin pages and the debug log, I don't see any confirmation. The Java Heap info is in both places, so I'd expect the MaxPermSize setting to show up in both places. The error is persisting and Atlassian support has been little help. I appreciate any help.

  Read the article

< Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >