Search Results

Search found 19279 results on 772 pages for 'everything'.

Page 352/772 | < Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >

• Keyboard no longer works when entering BIOS

  - by Tommy

  I am trying to boot from USB so I can install a couple different Linux distros. I can enter the BIOS, but as soon as I enter the BIOS the keyboard lights switch off (Num Lock and Caps Lock) and I cannot use the keyboard to do anything in the BIOS or even exit or restart the PC using Ctrl+Alt+Del or do anything at all with the keyboard. But as soon as I boot back into Windows, everything is fine... I've never had this problem before and some Googling hasn't helped. I've tried using a few other keyboards and simply unplugging/replugging the keyboards, but it didn't work. Is there anything I can do in Windows to maybe find out why the keyboard isn't working in the BIOS screen? In the Device Manager, all the drivers are up to date and there are no conflicts.

  Read the article

• random hard disk errors

  - by AugB

  For the past 2 years or so (4 year old custom build) I've been getting random moments where everything stops responding (or takes a very long time to respond) followed by I/O and hdd not detected errors on restart. To fix it, all I usually need to do is unplug my SATA cables from the hdd and mobo and plug them back in again and the problem disappears, at least for a little while (it ranges anywhere from a day to a few months time). Sometimes even a startup repair does the job. I've done multiple reformats and have also ran chkdsk more times than I can remember and both do not seem to help in the long run. Both the drives seem to be exhibiting the same problem. Have both my hdds been "dying" for the past couple of years, even though they are fully functional besides these occasional hiccups? Does the issue lie elsewhere? All feedback is appreciated. System specs: Biostar Tpower i45 mobo 2x WD Caviar 640GB hdds Zalman 750w psu Radeon 5870 gpu 2x2gb Gskill DDR2 ram Win7 64

  Read the article

• Total network data sent/received of a non-daemon Linux process?

  - by leden

  I'm looking for a simple and effective way of measuring total bytes received/sent from a single process upon its termination. Basically, I am looking for a tool which has the interface similar to "time" and "/usr/bin/time", e.g. measure-net-data <prog_to_run> <prog_args> Received (b): XYZ Sent (b): ABC I know that there are many tools for bandwidth/network monitoring, but as far I can tell all of them are performing the measurements it real-time, which is inappropriate not only because of overhead but also because of the inconvenience - I would need to stop the program, capture the output of the tool and then kill it. I have seen that newer versions of Linux 2.6.20+ provide /proc/<pid>/io/ which contain the information I'm looking for; however, everything under /proc/<pid> when the process terminates, so I'm again back to the same problem as with any network monitoring tool.

  Read the article

• Mac OS X: What is using my 'active' memory?

  - by badkitteh

  Hello fellas, I'm using a recent MacBook Pro with 8 GB of RAM and after a few hours of using it at work I notice the amount of 'active' memory growing and growing. Whenever I reboot my Mac, everything looks fine and it is hardly using any RAM. But after a few hours it looks like this: As you can see, in this case it's about 4.3 GB. Being a developer, I know that 'active memory' is the amount of memory that is currently used by running processes. So the first thing I did was quitting all applications and killing all processes that don't seem to belong to Mac OS X. After I did that, my active memory came down about 400 MB, but got stuck at what you see in the screenshot. There are no more processes or applications to quit. Now I'm wondering what is actually holding on to the memory? top and Activity Monitor don't report any processes with a high memory usage. Any ideas? Thanks!

  Read the article

• dist-upgrade broke my insatll HELP

  - by diefuchsjagden

  so I ran apt-get update; apt-get dist-upgrade the upgrade failed and I lost the gui, I have an encrypted /home drive. When I run apt-get * (any command) I have all kinds of errors mostly missing depends and thats because apparently my network stack is gone. I have no NIC if I run ifconfig. It doesn't even show up with lspci If I were to do a "clean" install of 10.04 LTS which is what I had on my on my build, will I lose all my data? BTW I was just using Ubuntu's default encryption to manage the encryption using my PSWD as the key so if I were to use the same user name and PSWD would my data be accessible? I can see my data from command line, when or if Xorg does start it just loads a basic window with nothing but a black X in the middle of the screen which I can only assume is my mouse cursor but it doesn't move! Reddit /r/linux had some ideas none of which worked was, no help. And apparently /r/ubuntu is full of jerks because all they did was ridicule me. If I can get my install back I probably will be switching back to either Slackware or Gentoo. The Ubuntu forums were of no help they had the same suggestion as /r/linux. I am about to just run my back up script to my back up drives and nuke everything else but I'd rather not.

  Read the article

• I deleted all files and folders (including hidden) from /home/username/ now in big trouble

  - by jeffery_the_wind

  I am logged into a remote ubuntu server, and I accidentally erased the entire /home/username/ directory for the current user. The only thing left is a hidden directory called .gvfs. I don't need anything of the Documents/Music/etc. Now it is not letting me cd into the /var/www/ directory, which has permissions 666 and it is owned by the current user. I am afraid to disconnect from my ssh session because I don't know if I will be able to get back on. Have I permanently created a problem? Is there a way I can replace the most important files to the /home/username/ directory? Thanks! ** EDIT ** Thanks everyone for the help. I figured the problem with cd into the /var/www/ was actually my permissions in the /var/www/ directory. It was set to 666, changed it to 755 and everything was good again. It doesn't look like anything systematic was ruined by deleting the contents of the user folder.

  Read the article

• Why can't I use %USERPROFILE% in %PATH%?

  - by Zano

  On my Windows 7 machine, using the System Properties Environment Variables tool, I try to add %USERPROFILE%\Bin to the system variable PATH. For some reason, that doesn't work, even though %SystemRoot%\system32 works fine. When I try to run commands from the console, files in my Bin folder are not found, even though files in the System32 folder are found. The only difference between UserProfile and SystemRoot that I can see is that the former is a user variable while the latter is a system variable. I i write echo %USERPROFILE%\Bin it yields c:\Users\zano, and if I add c:\Users\zano\Bin explicitly, everything work fine. What's the problem here?

  Read the article

• How to make a backup VPN server?

  - by akalenuk

  I have a small VPN network with a bunch of clients working mostly with each other and a VPN server. Everything works fine, except, obviously I can't shut VPN server down without breaking the network. I have a spare machine, which worked as an VPN server for the same network before so it is signed with the same SA as the first one and basically configured just the same as the first one. Technically I can make my clients work with it with little adjustment (by setting remote in etc/openpvn/clientx.conf), but it would be great make this switch automated. So basically I want two VPN servers running in the same network to work completely interchangeable without clients even knowing this. Can I do this with VPN or should I dig deeper into physical network layer?

  Read the article

• cd ~ dumps me in a seemingly empty directory

  - by Davidos

  This is on a Linux mint box. I'm told everywhere to use the command cd ~ To switch to the root directory before doing some command line magic. For some reason though, it dumps me in a directory named ~ where ls gives nothing and I can't get back to my home directory; I have to restart the terminal session to get out of the empty root directory. I'm positive that everything is just hidden to me, but even as a super-user I can't get the folders to show themselves. I usually just fall back to using a graphical file browser to roam those forbidden files, but I've recently just been shut out of my root directory, and the machine refuses to allow me to change the permissions on the stupid thing even when I type the root password in. It may just be some over-rigorous end-user shielding on the part of the mint team, but it's getting to be really frustrating now.

  Read the article

• Transfer using linux ssh and maintaining permissions

  - by jbolt

  I need to transfer files across ssh to another server. The file structures are identical on both sides. I have used scp -r but that does not retain the orginal file/dir permissions. rsync does the job of keeping the permissions in tact but does not delete the files on the destination side if I want to overwrite them because of changes. I know rsync will write the changes when the source files are newer but I need it to just copy everything reguardless of the date (ie replace destination directory with the one I am moving) without having to shell into the destination first and manually delete the dir. I heard tar can do this but I can not seem to get it to work without errors. The syntax is tar -cf - /directory/directory | ssh host.name tar -xf - C /destination_directory Any help would be appreciated.

  Read the article

• Forcing Windows to be 'awake' during certain hours?

  - by Mun

  I'm running Windows 7 and have the power options currently set up to put the machine to sleep after 2 hours of inactivity. Is there any way to force the machine not to sleep between certain hours, or to automatically wake up? I'm assuming this can't be done directly from within the Windows power settings, but is there a third party utility (preferably free) that could take care of this? I've got backups scheduled every morning at 3-4am, and these don't run if the machine is suspended, so I just need to make sure that the everything is powered up during this time.

  Read the article

• Django on Windows 2003 Slow Initially

  - by John

  I have setup Django to run on a windows 2003 server following the steps on the django wiki. Everything works fine and there are no errors. Only one instance of Django is setup on the server at the moment. However whenever the first page is requested it takes about 10 seconds to load the page. After this every page loads instantly. All my searches about speed issues with Django on windows refer to the local server, but not when using IIS and PyISAPIe. Thanks

  Read the article

• When you’re on a high, start something big

  - by BuckWoody

  Most days are pretty average – we have some highs, some lows, and just regular old work to do. But some days the sun is shining, your co-workers are especially nice, and everything just falls into place. You really *enjoy* what you do. Don’t let that moment pass. All of us have “big” projects that we need to tackle. Things that are going to take a long time, and a lot of money. Those kinds of data projects take a LOT of planning, and many times we put that off just to get to the day’s work. I’ve found that the “high” moments are the perfect time to take on these big projects. I’m more focused, and more importantly, more positive. And as the quote goes, “whether you think you can or you think you can’t, you’re probably right.” You’ll find a way to make it happen if you’re in a positive mood. Now – having those “great days” is actually something you can influence, but I’ll save that topic for a future post. I have a project to work on. :) Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• I suspect that my HDD is causing hardlocks, as all other components have been replaced. How can I check this theory and solve the potential cause?

  - by user867814

  I have had this problem over quite a while now, thorough multiple Linux kernel versions and distributions, as well as replacement of all components, aside from my main HDD - RAM, GPU(twice), mother board, CPU, power supply. What happens is, at one point during the operation of the PC, it will hardlock - everything stops working, external HDD is not shut down correctly and continues to spin until I plug it out and in, there are no system/kernel logs of any kind, and no otherwise nothing that would suggest a cause. Another reason for my suspicion is that the failures happen almost exclusively during HDD read/write activity - shutdown(happens nearly 1/3 of the time so far, it's only been few days though), launching programs, and once during operation of apt. I hope the post is descriptive enough, if you need any additional info, ask(and tell me how to prepare/obtain it), and I will provide. If I'm wrong, point me in the right direction. Thanks in advance.

  Read the article

• How do I transform a LAN subnet to another? (VPN)

  - by Krishath

  I've set up a VPN with a LAN behind it. VPN : 10.2.1.X LAN : 192.168.1.X When I connect from outside where the router via DHCP assigns me a similar IP to my "original LAN" (192.168.1.X) everything starts to be messed up. I can't route my traffic through the VPN and (obviosly) I can't reach my "real" LAN behind my VPN. How can I always reach my LAN? I thought that I can fake my LAN subnet to something like "10.2.2.X" to those PCs out of my VPN but in this way my VPN server should translate 10.2.2.X to 192.168.1.X (locally).[Is this S/D-NAT?] Is this possible? How can I accomplish that? Thank you very much!

  Read the article

• Problems with nvidia drivers

  - by Crs2489

  I have a problem that I haven't been able to find a solution to. I recently decided to switch from Windows to Ubuntu 11.10, so I originally installed Ubuntu using the wubi installer for windows. After I installed Ubuntu with wubi I installed drivers for nvidia using the additional drivers from system setting and everything worked fine. I then decided that I no longer wanted windows on my computer because i was having problems with it crashing when I went to remove the partition with windows on it using an Ubuntu Live CD I made I found that there were unrepairable problems with both of my partitions so I decided to delete both partitions and install Ubuntu again from the cd now when I try to install nvidia drivers my gui will not load when i start my computer. I have found people who have had similar problems with the gui not loading after installing nvidia drivers but no one who had there gui working after installing with wubi then not working after installing from a cd. I'm using Ubuntu 11.10 32 I have also tried other versions of linux like openSUSE and have had the same problem with the gui not being able to load after installing nvidia drivers.

  Read the article

• linux - Is Debian "lighter" than Ubuntu?

  - by user2983756

  I currently run Linux Mint 14 KDE on a "semi-old" machine I use for working and surfing the web - it was the first Linux system I ever used (running away from old Win XP), so I picked a complete system that would have most of my basic needs installed (I didn't even know what exactly all those needs were at the time). The thing is, my computer is becoming really old and Mint is a cluttered system, and for the next installation I'm going to try and install a "raw" system and get everything from the online repos. My question is: Since Ubuntu is Debian-based, does that make it consume more resources than its base system? If that isn't the difference, which one is "lighter" in that sense?

  Read the article

• Extended display - nightmare

  - by user206343

  I have been struggling for quite a while, and I hope one of you can shed some lights on my issue. I am using Xubuntu 13.10 (Ubuntu 12.04LTS behaves the same way, higher version wouldn't install, LinuxMint didn't install, Fedora didn't install). I am trying to set extend display for two dell monitors 1900x1200. It works great when in mirror mode, but I just cannot extend the display. Either one monitor goes to sleep and the other is unresponsive, or both work but are unusable. This is a link to the picture of my monitors in mirror mode This is link showing what happens after I try to extend the desktop I get the same results if I use aRandr or the built in configuration utility. I have an ATI Radeon X300 card. I cannot use proprietary Catalyst drivers (I would have to use the legacy ones, which would force me into using much older version of the OS). Extension is possible with Windows. I am hoping someone can come up with tweaks that would allow me to run an extended desktop. I truly love Xubuntu (and Ubuntu, unfortunately, Unity is a bit too heavy for my old PC, and I have to run in 2D mode, so 12.04 is as high as I can go). I have tried everything I could find online, but nothing worked thus far. I believe some configuration or something I am missing might work. Please, if you have any idea, do not hesitate. Thanks guys.

  Read the article

• Set up homeserver with single IP to host multiple sites on Ubuntu [closed]

  - by Ortix92

  I am trying to set up my homeserver so it can function as a regular server one would rent. I am running Ubuntu 12.04 LTS with openpanel. I have a single static IP address. I am used to having two addresses and pointing them to NS1.domain.tld and NS2.domain.tld and setting up the propper DNS records. I would also like to mention I am somewhat new to DNS zones. Either way, how would I go about setting this up correctly (in openpanel) with just a single IP address if possible at all? I have also read about free solutions online, but I would like to keep everything secure and private so other people can't peer into my data somehow. Thanks!

  Read the article

• Large OSX 10.6 to Windows 7 smb transfers fail?

  - by user41724

  I'm connecting to a windows 7 box from a OSX 10.6 box via smb: smb://ftp1 Connection works fine, I can transfer individual files one at a time, but as soon as I try and move an entier folder I get the following error: The Finder can’t complete the operation because some data in “test” can’t be read or written. (Error code -36) This error happens on all our OSX boxes when trying to push the entier folder to the Win7 box. The folder TEST in the above error message has -R 777 permissions. I can move every image file to the windows box one by one with no errors. But if I try an move the entier folder. bam error out. This error seems to kill the smb client on the Windows box as well. There's an FTP server on the windows box and I can FTP in from the OSX box and move everything just fine. Not sure what is going on here?

  Read the article

• Cleaning cruft from the stored configs database

  - by Zoredache

  I have setup stored configuration primarily as a method to manage my ssh known_hosts. Unfortunately as I retire hosts the old configs still exist in my database. The answer seems to be run the command puppet node clean <hostname>. The problem is that while this does command does run, and does clean up some data, it doesn't seem to clean up everything. For example I can still find values in the puppet_tags table that only applied to a hosts that no longer exists. What should I be doing to keep my stored configuration database clean of all extra junk that seems to be building up? P.S. Can anyone point me any documentation for the stored configuration schema?  If I could find good documentation, or at least an entity-relationship-diagram, I would be tempted to just do some manual clean-up.

  Read the article

• Best ways to move a server room and 80 desktops to a new building

  - by Marko

  Need to plan the best way to physically move a server room (12 IBM x3400 towers) and all associated networking equipment to a new building. Everything is going, comms (80 strong call centre operation), desktops(80-90) the whole lot and has to be done efficiently over a weekend. What I cant seem to find are the best ways to move equipment, i.e is it best to remove hard drives and pack them separetely, do I pack the chassis' with foam and/or surround them in bubble wrap? Are there specific products designed to move computer equipment and where would I find these. The internet has failed me so far, please help

  Read the article

• vmware takes too much time to shut down

  - by user33754

  Each time I shuting down my virtual machine - it takes like 30 minutes for VM Ware to complete the process. The shut down is done, but it shows a black screen and doesn't respond to any command. I can't do a Power Power OFF or Power Suspend. When I click it - nothing changes. When trying to close - it says "still busy". This happens only when using a Virtual Machine stored on an external hard drive. When Virtual Machine files are stored on a local drive - everything is OK. Hard drive is working good. Any suggestions how can I investigate the issue?

  Read the article

• RewriteMap syntax Regex

  - by ienabellamy

  in my .htaccess i've tons of directives, with same syntax: RewriteRule ^(.*)/PRODUCT_1.aspx http://www.site.com/product.php?id_product=2891 RewriteRule ^(.*)/PRODUCT_2.aspx http://www.site.com/product.php?id_product=2896 and everything works. Now, i created a RewriteMap in my because i need to increase velocity (20.000 redirect 301 in htaccess no good), so: RewriteEngine On RewriteMap redirects dbm=db:/var/www/html/presta152/prestashop/redirects.db RewriteCond ${redirects:$1} !="" RewriteRule ^(.*)$ ${redirects:$1} [redirect=permanent,last] and my redirects.db is created by redirects.txt, that contains: /PRODUCT_1.aspx http://www.site.com/product.php?id_product=2891 /PRODUCT_2.aspx http://www.site.com/product.php?id_product=2896 this works if i try to call for example: www.site.com/PRODUCT_1.aspx i'm redirected... but if i try to call www.site.com/everythingpossibileinside/PRODUCT_1.aspx the redirect doesn't work. So, in my .htaccess this rule: RewriteRule ^(.*)/PRODUCT_1.aspx http://www.site.com/product.php?id_product=2891 works, but in my RewriteMap no. I think i must change this directive: RewriteRule ^(.*)$ ${redirects:$1} [redirect=permanent,last] i tried, but unsuccessful. Thanks to all.

  Read the article

• Apache not responding in amazon ec2

  - by Viren

  Well this might sound awkward but I facing terrible issue with my Amazon EC2 instance one of the finding I see is that apache is not responding on port 80 which is weird because I can't even find the incoming packet to port 80 in tcpdump output As per the security rules all security rules are in place correctly at least in amazon console I restarted the apache to listen to port 8080 and added port 8080 and add 8080 to security rule and everything work but I cant just able to understand as to why the port 80 not responding Needless to say since port 8080 is responding all my CNAME and A-record is working too UPDATE No firewall issue either I just cross check the iptables and list is empty Can some share a light on this

  Read the article

< Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >