Search Results

Search found 14402 results on 577 pages for 'interface builder'.

Page 353/577 | < Previous Page | 349 350 351 352 353 354 355 356 357 358 359 360  | Next Page >

• Configuration Of modem/router to Telnet IPV6 addr

  - by vito

  Can any one help me to configure the modem/router, so that IPV6 address assigned by modem/router to Pc. I should telnet to that IPV6 address so that i can open the modem/router administration user interface. Now I have enabled the IPV6 in my PC, i am getting a IPV6 address from Modem/router. But not able to telnet to IPV6 address given by modem/router. It is possible to telnet to IPV6 address given by modem/router. I have tried it before. But now i have forgotten the configurations. Configuration snapshot has been attached. Thank you. configuration snapshot

  Read the article

• ISA bus on newer computers

  - by Kevin Ivarsen

  Are there companies that sell new computers that support old ISA bus expansion cards? We have an aging computer running DOS that operates some machinery via an ISA interface board. Updated versions of this board (e.g. PCI, USB) are not available, and I am concerned about the long-term reliability of the 8+ year old computers we currently keep around as backups. If these newer ISA-capable machines exist, are there any general gotchas to be aware of in terms of compatibility with older expansion boards, ability to run DOS, etc.?

  Read the article

• Packets marked INVALID in FORWARD rule

  - by Raphink

  I have a firewall that has 3 IP aliases on 1 physical interface. Packets get dropped between these 3 interfaces (either ICMP, HTTP, or anything else). We tracked it down to these packets being marked INVALID in the FORWARD rule and dropped due to the this rule: chain FORWARD { policy DROP; # connection tracking mod state state INVALID LOG log-prefix 'INVALID FORWARD DROP: '; mod state state INVALID DROP; mod state state (ESTABLISHED RELATED) ACCEPT; } (That is, we see the INVALID FORWARD DROP logs in dmesg) What could be causing this?

  Read the article

• Need to transfer large video from Camera!-app to computer

  - by Henrik Söderlund

  I have a jailbroken iPhone 4S and am trying to transfer a 25minute long HD-video that I have recorded through SmugMug's Camera-Awesome (Camera!) app. Once recorded in the app, it stays within that app's interface until you choose to save it via the app onto the camera roll. When trying this option, the app just stalls, even when leaving it for an hour plus. I assume the video is too large to copy. I am trying the iExplorer app on my MacBookAir. I can find the Documents folder inside the Camera!-folder. But as soon as I access it to view the contents, it simply stalls the app completely. Probably after trying to read the enormous video. Is there a clever way to transfer this file onto the computer? I can use iFile on the iPhone to transfer through wifi, but I don't know the Camera! app's Documents folder location on the file system.

  Read the article

• RemoteApps and Cached Credentials

  - by user66774

  I'm looking for a guidance on an issue we're having. We are hosting an application over terminal services through RDWeb on Windows 2008 Server. To give users the ability to change their password we've exposed the iisadmpwd to allow the users to change their passwords. When the users change their password, they are prompted to log into broker server, even if they log off of the RDWeb page and log back in. What we've found is that the credentials seem to be cached in memory after logging in. Ending task on TSWBPRXY.EXE, WKSPRT.EXE, closing IE and logging back into the RDWEb page, then launching the application allows the user to log into the application without additional credentials. I'm wondering if there is a better way to either have the user change their password from a web interface, but allow them to reestablish their connection from the RDWeb login page rather than through the RDP login prompt that comes up.

  Read the article

• Wordpress 3 multi-site install

  - by mike

  Hello, Trying to figure out if this is possible... My company has a cms product that was written in Java and we decided to use Wordpress to run blogs for our clients. Obviously, Wordpress does not run on tomcat(at least not by default) so we installed Pound(http://www.apsis.ch/pound/) on our server and have setup any Apache and Tomcat on different ports. When "/blog/" is requested, the request is directed to Apache. This works fine but we would like to use Wordpress multi site so that we can manage all the blogs from a single interface. We would also like the url for every site to be "/blog/" example: http://www.site1.com/blog/ http://www.site2.com/blog/ I'm thinking it would have to be done with apache??? Is it even possible? Thanks!

  Read the article

• TCP/IP communication between Hyper-V host and guests

  - by Tedd Hansen

  This may be a simple one. :) I have a simple Hyper-V setup with a few guest os running. The host has 1 physical network adapter with a static IP assigned to it. The guests have network adapters assigned to "Internet" (Hyper-V network) which is bound to the physical host network adapter (Hyper-V "External" connection type). I am not able to communicate (ping or anything else) between guests and host. I've checked firewall and it seems fine (ports open from anywhere still don't work). I'm trying to communicate with the hosts IP assigned to the same physical interface that the guests are sharing. Guests can communicate between them just fine. I can't seem to find any relevant setting (I might just be missing it). So my questions: How do I fix it so host and guests can communicate?

  Read the article

• Configure Virtualbox guest with static IP, SSH and internet access from host

  - by koskoz

  I have an Ubuntu Server 12 virtualbox guest running on a Windows 7 host which has a dynamic IP (and I don't wanna change this considering it's a laptop and I'm changing network frenquently). I want to have a static IP for my VM and a SSH access from my host but I still want to have the internet access on my VM. I tried added a second host only adapter and configured /etc/network/interface to set eth1 to a static ip, but I can't connect via SSH to it. Setting only adapter1 to host only works for SSH and static IP but I lose the internet access.

  Read the article

• Running OpenVZ virtual servers within a Xen XCP vritual server? Bad practice?

  - by Damainman

  I have a 1 server with 8GB RAM and 2xQuadcore Processors. It currently has the Xen XCP installed on it, and centos6.2 x64 running on a virtual machine. I have a server control panel software that I want to use and it allows the administration via a web interface for Openvz machines. My questions are: Would this be considered bad practice? Would there be a big performance hit? Should I avoid this all together or am I going about it all wrong? Thank you in advance.

  Read the article

• Windows Internet Connection sharing with Mobile Broadband

  - by PaoloFCantoni

  Due to circumstances, I have only got mobile broadband where I am living. I have a small network with a ADSL Router (but which isn't connected to the Internet. I want to use ICS to allow one machine (with the MBB modem) to act as the Internet interface and allow other machines connected to the ADSL router (including a new Android tablet by WiFi) to use the single mobile broadband connection. I've a feeling that my configuration is not valid - as it stands, but I'm not sure. Can some kind soul lead me "by the nose" to getting this working? FWIW The mahcines are all running Windows 7 TIA, Paolo

  Read the article

• How do I prevent 'net ads join' from doing DDNS update?

  - by genehack

  I'm using 'net ads join' to add Linux servers to an AD domain. The servers are multi-homed, with a public IP on eth1 and a non-routable private background network on eth0 (in the 172.20 space, used for netboots and installs and stuff -- no routing to the Internet on that network). When I 'net ads join', it appears that a DDNS entry is getting created for the 172.20 interface. How can I prevent this from happening? (FWIW, my powers at the AD level are very limited -- I can join servers and delete server records but that's about it...)

  Read the article

• 'hijacking' gui and mapping certain controls to certain functions. VNC. TouchOSC

  - by Nick

  I need a VNC LIKE application which rather than sharing the screen, can take control of a specific application and then share that functionality across a network to multiple clients. Obviously, VNC requires use of the mouse and therefore only one user can do something at one time, this is NOT what I am after. I am after something that can hijack the graphic user interface, map certain controls, and then display them in another piece of software (perhaps like TOUCHOSC) The software I would like to map and share is called YAMAHA STUDIO MANAGER and is used to control certain Yamaha audio hardware, and in my case a Yamaha LS9 and M7CL mixing console. Its free.

  Read the article

• Stop Windows Media Player from connecting to Internet/MS using hosts file or alternate method?

  - by Joe

  Is there a way to prevent Windows Media Player from connecting to the internet and MS using the hosts file or other methods? Edit: (Nov 20 2009 at 19:16) I have both VLC and MPC and I do use them. However I am currently using WMP to organize all my music and I hate that WMP is always making outgoing connections. I just tried TCPView and can't believe how many connections WMP makes when you first launch it. I have even disabled everything in its options that relates to connecting to internet. Could any of you recommend a good media player thats also good for organizing your music library like WMP, and doesnt connect to the internet? Preferably one that a WMP user would actually like as much as WMP. The reason I use WMP is because I like its interface, the way its setup and how it looks.

  Read the article

• Is Apache ReverseProxy to Passenger Standalone an acceptable production deployment?

  - by davetron5000

  I have the need to deploy Rails 3 apps, using RVM and gemsets, and am expecting “public” traffic (i.e. this is not an internal-only app). I also must use Apache as the public interface to my app. I understand that Passenger Standalone can help accomplish the rails/RVM end, and I have successfully set it up in my development environment. My question is how viable this setup is for a production deployment. Is deploying via Apache configured to ReverseProxy to my passenger-powered Rails app going to create problems? Since I'm designing the production deployment now, I want to understand if I should spend the additional time to set up Passenger connected to Apache and have that Passenger communicate with Passenger Standalone instance running my Rails app. So, I'm looking for one of I guess three answers: Apache Reverse Proxy to Passenger Standalone will be generally fine You should not use the Apache/Passenger Standalone configuration, but set up Passenger on the Apache side as well Your entire setup is just Wrong, please RTFM (and include link to "FM")

  Read the article

• Mark packets across computers?

  - by eudemo

  I use Transmission on Ubuntu and I'm having this issue, which basically says that QoS is broken because there is no way to limit which outgoing ports uses. I was thinking of doing a dirty and ugly hack and create an interface alias and define QoS based on source address, but was wondering if is there another way. Is it possible to mark the packets on the original machine in some way, using the owner and mark modules of iptables and sending this to the router who does the QoS? From what I understand, mark on iptables only applies to the local machine, so this will not work, but is there another way?

  Read the article

• How can I specify custom folders for file-browsing in Metro Apps?

  - by klyonrad

  Whenever you use an Metro app and you want to import some files there is a little file browser. Like this: A lot of folders possible; however there is a folder that is very important: The personal Dropbox. How can I add this folder as a "favorite" in this view? Always browsing through the whole filesystem is slow in the Metro Interface. I realize I could make symlinks for all the typical Dropbox folders but that's simply annoying and there has to be another way (just like it's possible to "hack" the "Send To..." options for the context menu.

  Read the article

• Is it possible to live-boot VirtualBox from a USB flash drive?

  - by bw.

  To clarify, I'm not asking if you can boot from USB from within VirtualBox. I would like to make a portable version of Windows 7 that I can run from a USB drive on any machine. I'm putting a distro of Linux on my laptop, but I manage a Windows domain at work so I'd like an easier management solution than trying to use Linux tools to interface with a Windows DC(as RDP to a DC is not always an option). The reason I'm inquiring about VirtualBox... I plan on carrying this portable installation with me and using it on multiple machines, so I would like to avoid driver conflicts (which I imagine would happen if I only installed Windows on a flash drive). Basically, I need a way to boot an installation of Windows 7 from USB that still allows me to install/remove/update programs as if it were installed on a standard hard drive, and not freak out over different hardware configurations. Please help, superusers!

  Read the article

• Outbound Traffic Logging on ASA 5520 possible?

  - by j2k4j

  Taking a look at the ASDM (6.4) for my ASA 5520, I get a nice summary of the traffic status, with items like "interface traffic usage", and "connections per second". This works well, but only shows the data for the last 5-6 minutes or so. Recently, I've been asked whether it's possible to pull up this same type of traffic data for a particular time in the past. (Such as: Find the traffic usage for a 3 minute period from date xx:xx:xx @ time xx:xx:xx) I've noticed that my ASA 5520 is logging the warning, errors, etc that it is processing. But traffic data is not logged (yet) according to my search through the ASA. Is logging the traffic data amounts (as wondered above) actually a possibility? Is there any way to find out the past data for traffic and such values? Thanks!

  Read the article

• VMWare hypervisor with only 1 network card?

  - by Rafiq Maniar

  VMWare hypervisor minimum requirements states that the minimum network requirements is: one NIC, plus one for Management interface (source: http://www.vmware.com/products/datacenter-virtualization/vsphere-hypervisor/requirements.html) It used to be possible to use 1 NIC only. Is anybody using the new versions of VMWare in this configuration? I ask because my colo provider will only provide me with 1 uplink (my server does have 2 NICs). I need to be able to run the VMs and also have remote management using only 1 NIC. Possible?

  Read the article

• Combine OS partion with data partition on NAS4Free/FreeNAS

  - by Pak

  I recently built a NAS4Free (formerly FreeNAS) machine using a 256MB (yes, MB) USB drive for the OS. When I did the original install, I had the bright idea of making the OS partition just big enough for the OS and a then creating a second partition using the remainder of the drive to store stuff pertaining to the OS. I never really found a use for the data partition and I ended up running out of space on the OS partition, so now I'd like to combine the partitions into a single partition. Is this something that is possible to do while everything is up and running? If it comes down to it, I can take down the machine and do a fresh install of the OS using the entire space of the USB drive, but I'd like to use this as an opportunity to better familiarize myself with FreeBSD/UNIX type systems. If this is possible, will it interfere with the NAS4Free things? The data partition shows up in the web interface under the disks section. If I end up manually changing the partitions, I'd be concerned with NAS4Free getting confused by the missing partition.

  Read the article

• check_postgres_checkpoint plugin error

  - by Iliyas

  I am using the check_postgres.pl plugin for Nagios. I am trying to monitor how long since the last checkpoint has been run using the check_postgres_checkpoint option. When I run the command from CLI as root I am getting the output but I am not able to get the output in the Nagios web interface. The error which it shows is, ERROR: pg_controldata could not read the given data directory: "/opt/PostgreSQL/9.1/data" It is trying to access the pg_control file in the 'global' directory present beneath the data directory which has only read access to the postgres user. Can anyone please suggest me how this can be resolved ? Thanks.

  Read the article

• Keep IMAP messages locally when deleted remotely

  - by user74328

  I use my email from my phone and my computer via IMAP. I want to set something up so that if I delete a message via my phone, my computer will still keep the message locally. For example, assume I leave my computer on, with a synchronize interval of 5 minutes. I want to be able to send something from my phone, wait 5 minutes to be sure my computer has downloaded the item from the Sent folder, then delete it from the IMAP sent folder via my phone, but have the computer at home keep it's copy. Is this possible with any readily available email clients out there? I have Thunderbird and Outlook at the moment, but would be willing to learn a new interface for this feature. How can I accomplish this?

  Read the article

• WAN and LAN setup for IPv6

  - by neu242

  We just got a IPv6 /48 range (a gateway and an IP address) for our company, but I'm unsure about how to set it up. We use FreeBSD 8.4 (pfSense 2.1) as a router/firewall. Currently we have IPv4 setup with a WAN towards the internet, and a NAT-ed LAN behind it for office PCs. We want to keep the LAN network for security, and we want IPv6 addresses from the /48 for all office PCs (without NAT). The WAN is configured with the IPv6 gateway 1111:2222:3333::1/48 and interface address 1111:2222:3333::2/48. But when it's configured this way, I guess it's impossible to fit the LAN on a /64 within the /48? I believe I should configure the WAN subnet on 1111:2222:3333:1::/64 and the LAN on a subnet like 1111:2222:3333:2::/64. Is this something I can configure myself, or do I have to ask the ISP to configure that routing for me?

  Read the article

• How to failover to local account on a cisco switch/router if radius server fails?

  - by 3d1l

  I have the following configuration on a switch that I testing for RADIUS authentication: aaa new-model aaa authenticaton login default group radius local aaa authentication enable default group radius enable aaa authorization exec default group radius local enable secret 5 XXXXXXXXX ! username admin secret 5 XXXXXXXXX ! ip radius source-interface FastEthernet0/1 radius-server host XXX.XXX.XXX.XXX auth-port 1812 acct-port 1813 key XXXXXXXXX radius-server retransmit 3 ! line con 0 line vty 5 15 Radius authentication is working just fine but if the server is not available I can not log into the router with the ADMIN account. What's wrong there? Thanks!

  Read the article

• Dell Vostro 3500 battery life remaining missing from Windows 8?

  - by Misha

  On Windows 7 a Vostro 3500 laptop shows the battery life remaining, while on Windows 8 this information appears to be missing. The percentage is still available, but the life remaining is missing. How is battery life remaining calculated and does this require some level of driver support? Is it a standardized interface? Does anybody know which driver is responsible for handling this feature? I want to force the old Windows 7 driver, but I don't know which driver does battery remaining.

  Read the article

< Previous Page | 349 350 351 352 353 354 355 356 357 358 359 360  | Next Page >