Search Results

Search found 12222 results on 489 pages for 'initial context'.

Page 354/489 | < Previous Page | 350 351 352 353 354 355 356 357 358 359 360 361  | Next Page >

• Ideas for a rudimentary software licensing implementation

  - by Ross

  I'm trying to decide how to implement a very basic licensing solution for some software I wrote. The software will run on my (hypothetical) clients' machines, with the idea being that the software will immediately quit (with a friendly message) if the client is running it on greater-than-n machines (n being the number of licenses they have purchased). Additionally, the clients are non-tech-savvy to the point where "basic" is good enough. Here is my current design, but given that I have little to no experience in the topic, I wanted to ask SO before I started any development on it: A remote server hosts a MySQL database with a table containing two columns: client-key and license quantity The client-side application connects to the MySQL database on startup, offering it's client-key that I've put into a properties file packaged into the distribution (I would create a new distribution for each new client) Chances are, I'll need a second table to store validation history, so that with some short logic, the software can decide if it can be run on a given machine (maybe a sliding window of n machines using the software per 24 hours) If the software cannot establish a connection to the MySQL database, or decides that it's over the n allowed machines per day, it closes The connection info for the remote server hosting the MySQL database should be hard-coded into the app? (That sounds like a bad idea, but otherwise they could point it to some other always-validates-to-success server) I think that about covers my initial design. The intent being that while it certainly isn't full-proof, I think I've made it at least somewhat difficult to create an easily-sharable cracking solution. Also, I can easily adjust the license amount for a given client/key pair. I gotta figure this has been done a million times before, so tell me about a better solution that's just as simple to implement and provides the same (low) amount of security. In the event that external libraries are used, I prefer Java, as that's what the software has been written in.

  Read the article

• jQuery Colorbox Iframe and Selector

  - by Joker

  I have this: $("a.money").colorbox({href:$("a.money").attr("href")+" div#content"}); Which opens an overlay but only of the content within the #content selector. If I add iframe:true, this will no longer work. Is there a way to get it to work with an iframe? Edit: The closest I could get it to work was by doing this: $("a.money").colorbox({iframe:true, width:700, height:425, onComplete: function() { alert('test'); $test = $("#cboxLoadedContent iframe").contents().find("#content").html(); $("#cboxLoadedContent iframe").contents().find("#container").html($test); } }); Although without the alert it doesn't appear to work, I looked into that and I think I need to use .live(), which led me to trying this: $('a.money').live('click', function() { url = this.href; // this is the url of the element event is triggered from $.fn.colorbox({href: url, iframe:true,width:700, height:425, onComplete: function() { $test = $("#cboxLoadedContent iframe").contents().find("#content").html(); $("#cboxLoadedContent iframe").contents().find("#container").html($test); } }); return false; }); Didn't work, I still needed to add an alert to make it work. In case you might be wondering what I'm trying to do. The webpage is loaded in the iframe, with all the elements in the #container, so that includes #header, #sidebars, but I only want to show the #content inside the iframe. However, this led me to another problem I realized. Assuming I got this to work without the alert, it will only work for that initial page. For example, if I loaded up a form in the iframe, after submitting the form, I would once again see the whole layout instead of just the #content portion. Is it possible to continue only showing the #content portion of the page upon further navigation?

  Read the article

• Automatic multi-page multi-column flowing text with QtWebkit (HTML/CSS/JS -> PDF)

  - by Peter Boughton

  I have some HTML documents that are converted to PDF, using software that renders using QtWebkit (not sure which version). Currently, the documents have specific tags to split into columns and pages - so whenever the wording changes, it is a manual time-consuming process to move these tags so that the columns and pages fit. Can anyone provide a way to have text auto-wrapped into the next column/page (as appropriate) when it reaches the bottom of the current container? Any HTML, CSS or JS supported by QtWebkit is ok (assuming it works in the PDF converter). (I have tested the webkit-column-* in CSS3 and it appears QtWebkit does not support this.) To make things more exciting, it also needs to: - put a header at the top of each page, with page X of Y numbering; - if an odd number of pages, add a blank page at the end (with no header); - have the ability to say "don't break inside this block" or "don't break after this header" I have put some quick example initial markup and target markup to help explain what I'm trying to do. (The actual documents are far more complicated than that, but I need a simple proof-of-concept before I attack the real ones.) Any suggestions? Update: I've got a partially working solution using Aaron's "filling up" suggestion - I'll post more details in a bit.

  Read the article

• Interpolating environment variables into a string in Ruby using String#scan

  - by robc

  I'm trying to interpolate environment variables into a string in Ruby and not having much luck. One of my requirements is to do something (log an error, prompt for input, whatever) if a placeholder is found in the initial string that has no matching environment variable. It looks like the block form of String#scan is what I need. Below is an irb session of my failed attempt. irb(main):014:0> raw_string = "need to replace %%FOO%% and %%BAR%% in here" => "need to replace %%FOO%% and %%BAR%% in here" irb(main):015:0> cooked_string << raw_string => "need to replace %%FOO%% and %%BAR%% in here" irb(main):016:0> raw_string.scan(/%%(.*?)%%/) do |var| irb(main):017:1* cooked_string.sub!("%%#{var}%%", ENV[var]) irb(main):018:1> done irb(main):019:1> end TypeError: cannot convert Array into String from (irb):17:in `[]' from (irb):17 from (irb):16:in `scan' from (irb):16 from :0 If I use ENV["FOO"] to manually interpolate one of those, it works fine. I'm banging my head against the desk. What am I doing wrong? Ruby is 1.8.1 on RHEL or 1.8.7 on Cygwin.

  Read the article

• unix at command pass variable to shell script?

  - by Andrew

  Hi, I'm trying to setup a simple timer that gets started from a Rails Application. This timer should wait out its duration and then start a shell script that will start up ./script/runner and complete the initial request. I need script/runner because I need access to ActiveRecord. Here's my test lines in Rails output = `at #{(Time.now + 60).strftime("%H:%M")} < #{Rails.root}/lib/parking_timer.sh STRING_VARIABLE` return render :text => output Then my parking_timer.sh looks like this #!/bin/sh ~/PATH_TO_APP/script/runner -e development ~/PATH_TO_APP/lib/ParkingTimer.rb $1 echo "All Done" Finally, ParkingTimer.rb reads the passed variable with ARGV.each do|a| puts "Argument: #{a}" end The problem is that the Unix command "at" doesn't seem to like variables and only wants to deal with filenames. I either get one of two errors depending on how I position "s If I put quotes around the right hand side like so ... "~/PATH_TO_APP/lib/parking_timer.sh STRING_VARIABLE" I get, -bash: ~/PATH_TO_APP/lib/parking_timer.sh STRING_VARIABLE: No such file or directory I I leave the quotes out, I get, at: garbled time This is all happening on a Mac OS 10.6 box running Rails 2.3 & Ruby 1.8.6 I've already messed around w/ BackgrounDrb, and decided its a total PITA. I need to be able to cancel the job at any time before it is due.

  Read the article

• python __import__() imports from 2 different directories when same module exists in 2 locations

  - by programer_gramer

  Hi, I have a python application , which has directory structure like this. -pythonapp -mainpython.py -module1 -submodule1 -file1.py -file2.py -submodule2 -file3.py -file3.py -submodule3 -file1.py -file2.py -file5.py -file6.py -file7.py when I try to import the python utilities(from mainpython.py) under submodule3 , I get the initial 2 files from submodule1.(please note that submodule1 and 3 have 2 different files with the same name). However the same import works fine when there is no conflict i.e it correctly imports file 5,6,7 from submodule3. Here is the code : name=os.path.splitext(os.path.split("module1\submodule3\file1.py")[1])[0] -- file1.py name here is passed dynamically. module = import(name) //Here is name is like "file1" it works(but with the above said issue, though, when passes the name of the file dynamically), but if I pass complete package as "module1.submodule1.file1" it fails with an ImportError saying that "no module with name file1" Now the question is how do we tell the interpreter to use only the ones under "module1.submodule3.file2"? I am using python This is really urgent one and I have run out of all the tries. Hope some experienced python developers can solve this for me?

  Read the article

• Understanding CSRF - Simple Question

  - by byronh

  I know this might make me seem like an idiot, I've read everything there is to read about CSRF and I still don't understand how using a 'challenge token' would add any sort of prevention. Please help me clarify the basic concept, none of the articles and posts here on SO I read seemed to really explicitly state what value you're comparing with what. From OWASP: In general, developers need only generate this token once for the current session. After initial generation of this token, the value is stored in the session and is utilized for each subsequent request until the session expires. If I understand the process correctly, this is what happens. I log in at http://example.com and a session/cookie is created containing this random token. Then, every form includes a hidden input also containing this random value from the session which is compared with the session/cookie upon form submission. But what does that accomplish? Aren't you just taking session data, putting it in the page, and then comparing it with the exact same session data? Seems like circular reasoning. These articles keep talking about following the "same-origin policy" but that makes no sense, because all CSRF attacks ARE of the same origin as the user, just tricking the user into doing actions he/she didn't intend. Is there any alternative other than appending the token to every single URL as a query string? Seems very ugly and impractical, and makes bookmarking harder for the user.

  Read the article

• How to disable vertical bounce/scroll on iPhone in a mobile web application

  - by Kasper Skov

  As the title says, i need to disable vertical bounce on iphone on my mobile web form application. Ive tried alot of different things, but most of them disables my form or horizontal scroll and bounce as well. Any ideas? Im using jquery.mobile btw :) Update: I actually managed to get the code from the first answer working somewhat: function stopScrolling( touchEvent ) { touchEvent.preventDefault(); } document.addEventListener( 'touchstart' , stopScrolling , false ); document.addEventListener( 'touchmove' , stopScrolling , false ); The reason why I couldnt get it to work in the first place, was that there actually was some margin on my body (stupid me). But. As the layout is fluid and im using jquery.mobile and have <meta name="viewport" content="width=device-width, initial-scale=1, maximum-scale=1"> in the header (I think) it doesnt work properly. The page is zoomed out (view from like a desktop browser) and zooming is disabled. Without the code, the page scales perfectly right from an 50" tv to the smallest nokia on the planet. Am I doing something wrong? Im starting to think the problem is caused by the body/content somehow being over 100% of the viewport. No idea how though.

  Read the article

• How does this code break the Law of Demeter?

  - by Dave Jarvis

  The following code breaks the Law of Demeter: public class Student extends Person { private Grades grades; public Student() { } /** Must never return null; throw an appropriately named exception, instead. */ private synchronized Grades getGrades() throws GradesException { if( this.grades == null ) { this.grades = createGrades(); } return this.grades; } /** Create a new instance of grades for this student. */ protected Grades createGrades() throws GradesException { // Reads the grades from the database, if needed. // return new Grades(); } /** Answers if this student was graded by a teacher with the given name. */ public boolean isTeacher( int year, String name ) throws GradesException, TeacherException { // The method only knows about Teacher instances. // return getTeacher( year ).nameEquals( name ); } private Grades getGradesForYear( int year ) throws GradesException { // The method only knows about Grades instances. // return getGrades().getForYear( year ); } private Teacher getTeacher( int year ) throws GradesException, TeacherException { // This method knows about Grades and Teacher instances. A mistake? // return getGradesForYear( year ).getTeacher(); } } public class Teacher extends Person { public Teacher() { } /** * This method will take into consideration first name, * last name, middle initial, case sensitivity, and * eventually it could answer true to wild cards and * regular expressions. */ public boolean nameEquals( String name ) { return getName().equalsIgnoreCase( name ); } /** Never returns null. */ private synchronized String getName() { if( this.name == null ) { this.name == ""; } return this.name; } } Questions How is the LoD broken? Where is the code breaking the LoD? How should the code be written to uphold the LoD?

  Read the article

• error in the syntax of cmd parameters

  - by KATy

  hi guyz in this method i m just adding the values to the db. temp is a object. the field value and variables in the object re havin the same name.. dono y this error s comin plz help me out... public virtual void Save_input_parameter_details(Test_Unit_BLL temp ) { SqlConnection con; con = new SqlConnection("Data Source=VV;Initial Catalog=testingtool;User ID=sa;Password=sa;"); con.Open(); SqlCommand cmd, cmd2, cmd3; //try //{ for (int i = 0; i < temp.No_Input_parameters; i++) { cmd2 = new SqlCommand("insert into Input_parameter_details values(@Input_Parameter_name,@Input_Parameter_datatype,@noparams,@class_code", con); cmd2.Parameters.AddWithValue("@Input_Parameter_datatype", temp.Input_Parameter_datatype[i]); cmd2.Parameters.AddWithValue("@Input_Parameter_name", temp.Input_Parameter_name[i]); cmd2.Parameters.AddWithValue("@noparams", temp.No_Input_parameters); cmd2.Parameters.AddWithValue("@class_code",temp.class_code); cmd2.ExecuteNonQuery(); } //} //catch (Exception ex) // { // MessageBox.Show("error"+ex); // } }

  Read the article

• NSFetchedResultsController: changing predicate not working?

  - by icerelic

  Hi, I'm writing an app with two tables on one screen. The left table is a list of folders and the right table shows a list of files. When tapped on a row on the left, the right table will display the files belonging to that folder. I'm using Core Data for storage. When the selection of folder changes, the fetch predicate of the right table's NSFetchedResultsController will change and perform a new fetch, then reload the table data. I used the following code snippet: NSPredicate *predicate = [NSPredicate predicateWithFormat:@"list = %@",self.list]; [fetchedResultsController.fetchRequest setPredicate:predicate]; NSError *error = nil; if (![[self fetchedResultsController] performFetch:&error]) { NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); } [table reloadData]; However the fetch results are still the same. I've NSLog'ed "predicate" before and after the fetch, and they were correct with updated information. The fetch results stay the same as initial fetch (when view is loaded). I'm not very familiar with the way Core Data fetches objects (is there a caching system?), but I've done similar things before(changing predicates, re-fetching data, and refreshing table) with single table views and everything went well. If someone could gave me a hint I would be very appreciated. Thanks in advance.

  Read the article

• Syncing two separate structures to the same master data

  - by Mike Burton

  I've got multiple structures to maintain in my application. All link to the same records, and one of them could be considered the "master" in that it reflects actual relationships held in files on disk. The other structures are used to "call out" elements of the main design for purchase and work orders. I'm struggling to come up with a pattern that deals appropriately with changes to the master data. As an example, the following trees might refer to the same data: A |_ B |_ C |_ D |_ E |_ B |_ C |_ D A |_ B E C |_ D A |_ B C D E These secondary structures follow internal rules, but their overall structure is usually user-determined. In all cases (including the master), any element can be used in multiple locations and in multiple trees. When I add a child to any element in the tree, I want to either automatically build the secondary structure for each instance of the "master" element or at least advertise the situation to the user and allow them to manually generate the data required for the secondary trees. Is there any pattern which might apply to this situation? I've been treating it as a view problem, but it turns out to be more complicated than that when you look at the initial generation of the data.

  Read the article

• jQuery capture all changes to named inpt on a form

  - by Brian M. Hunt

  I'm trying to determine when any of a set of named input/select/radio/checked/hidden fields in a form change. In particular, I'd like to capture when any changes are made to fields matching jQuery's selector $("form :input"), and where that input is has a name attribute. However, the form isn't static i.e. some of the fields are dynamically added later. My initial thought is to keep track of when new named elements matching :input are added, and then add an event handler, like this: function on_change() { alert("The form element with name " + $(this).attr("name") + " has changed"); } function reg_new_e_handler(input_element) { input_element.change(on_change); } However, I'm quite hopeful I can avoid this with some jQuery magic. In particular, is there a way to register an event handler in jQuery that would handle input elements that match the following: $("form :input").filter( function () { $(this).attr("name") } ).change(on_change); However, have this event set update whenever new input elements are added. I've thought that it may be possible to capture keyup event on the form node with $("form").keyup(on_change), but I'm not so sure how one could capture change events. I'd also like this to capture keyup events. Thank you for reading. Brian

  Read the article

• OutOfMemoryException when I read FileStream 500 MB

  - by Alhambra Eidos

  Hi all, I'm using Filestream for read big file ( 500 MB) and I get the OutOfMemoryException. Any solutions about it. My Code is: using (var fs3 = new FileStream(filePath2, FileMode.Open, FileAccess.Read)) { byte[] b2 = ReadFully(fs3, 1024); } public static byte[] ReadFully(Stream stream, int initialLength) { // If we've been passed an unhelpful initial length, just // use 32K. if (initialLength < 1) { initialLength = 32768; } byte[] buffer = new byte[initialLength]; int read = 0; int chunk; while ((chunk = stream.Read(buffer, read, buffer.Length - read)) > 0) { read += chunk; // If we've reached the end of our buffer, check to see if there's // any more information if (read == buffer.Length) { int nextByte = stream.ReadByte(); // End of stream? If so, we're done if (nextByte == -1) { return buffer; } // Nope. Resize the buffer, put in the byte we've just // read, and continue byte[] newBuffer = new byte[buffer.Length * 2]; Array.Copy(buffer, newBuffer, buffer.Length); newBuffer[read] = (byte)nextByte; buffer = newBuffer; read++; } } // Buffer is now too big. Shrink it. byte[] ret = new byte[read]; Array.Copy(buffer, ret, read); return ret; } thanks in advanced,

  Read the article

• file upload working in one and not the other help

  - by rod

  Hi All, I have a web application which has 2 different versions deployed. 1 is a ASP.Net web forms version and the other is an ASP.Net MVC version I have a File Upload page which dynamically creates a directory folder for the target location of the file to be uploaded to. The application is using Forms Authentication for outside users and Integrated Windows Authentication for inside the network users. I have an issue where a user can upload a file in the ASP.Net Web Forms version fine. But when the same user tries to upload the file in the MVC version the user gets a File.IO permission error. Here's a kicker: I can upload the same file in both versions. The user is in a remote location but I believe they're still inside the network because they can work on the other parts of the application just fine. Possible clues: In the event log there's an info that says Event code:4005 Forms authentication failed for the request. Reason: Ticket supplied was invalid. What would be your initial thoughts on why this is happening? Thanks, Rod.

  Read the article

• Switch between multiple views while respecting orientation

  - by zoul

  Hello! I have an MVC application with a single model and several views (something like skins). I want the user to be able to switch the views and I can’t get it working with interface orientation. The most simple approach looks like this: - (void) switchToADifferentView: (UIView*) newView { // self is a descendant of UIViewController self.view = newView; } This does not work because the incoming view does not get rotated according to current orientation (until the next orientation change, test case). Is there a way to force the orientation on a view? It looks like the system is trying really hard to keep the interface controls for itself. (Or is it as simple as setting the right transform by hand?) I figured I’d better not switch the views directly and switch controllers instead. This makes sense, as it makes the initial code simpler. But how do I switch controllers that have no “navigation relation” between them? I guess I could use presentModalViewController:, but that seems like a hack. Same goes for navigation controller. If I exchange the controllers by hand, I get the wrong orientation again: - (void) switchToAController: (id) incoming { [currentController.view removeFromSuperview]; [window addSubview:incoming.view]; // does not respect current orientation } Now how the heck do I simply exchange the current controller for another one? Again, the controllers are something like “skins” operating above a shared model, so it really makes no sense to pretend that skin A is a “modal” dialog above skin B or that they’re a part of a navigation stack.

  Read the article

• Java get user details

  - by LC

  I'm new to Java and I have to write a program to get user details which appear like this: Author’s Details **************** Name: J. Beans YOB: 1969 Age: 41 Book Details ************ Title: *Wonderful Java* ISBN: *978 0 470 10554 9* Publisher: *Wiley* This is what I've done but it does not work, can anyone help me to find out the problem ? import java.util.Scanner ; public class UserDetails { public static void main(String args[]) { System scan = new Scanner(System.in); input sname, fname, born, title, isbn, publisher; System.out.print("Please enter author's surname:"); sname = input.nextLine(); System.out.print("Please the initial of author's first name:"); fname = input.nextLine(); System.out.print("Please enter the year the author was born:"); born = input.nextLine(); System.out.print("Please enter the author's book title:"); title = input.nextLine(); System.out.print("Please enter the book's ISBN:"); isbn = input.nextLine(); System.out.print("Please enter the publisher of the book:"); publisher = input.nextLine; System.out.println("Author's detail"); System.out.println("**********************"); System.out.println("Name:" + fname + sname); System.out.println("YOB:" + born); System.out.println("Age" + born); System.out.println("Book Details"); System.out.println("**********************"); System.out.println("Title:" + "*" + title + "*"); System.out.println("ISBN:" + "*" + isbn + "*"); System.out.println("Publisher:" + "*" + publisher + "*"); } }

  Read the article

• SQL Server 2008 - Login failed for user 'user1' The user is not associated with a trusted SQL Server connection

  - by difek

  I have installed SQL Server 2008 R2 on Windows XP. In installation process I selected 'SQL Server and Windows Authentication Mode' When I click right button of the mouse in SQL Server Management Studio on Server - Security tab 'SQL server and Windows Authentication Mode' is selected. But when I click on my Database - Properties - View connection properties Authentication Method is set on Windows Authentication. To my database was added one user1 with password user1. But I can't log in to my database from C# (Visual Studio 2008) because error occurs: Login failed for user 'user1' The user is not associated with a trusted SQL Server connection What isn't right ? When I get: string connectionStr = @"Data Source=rmzcmp\SQLExpress;Initial Catalog=ResourcesTmp;Integrated Security=True"; I have following error: {"Cannot open database \"ResourcesTmp\" requested by the login. The login failed.\r\nLogin failed for user 'RMZCMP\rm'."} rm is my original user name on which I log in to my computer. When I get rm I have error: {"Login failed for user 'rm'. The user is not associated with a trusted SQL Server connection."} again. Regards

  Read the article

• Hardware acceleration issue with WPF application - Analyzing crash dumps

  - by Appu

  I have a WPF application crashing on the client machine. My initial analysis shows that this is because of H/W acceleration and disabling H/W acceleration at a registry level solves the issue. Now I have to make sure that this is caused because of H/W acceleration. I have the crash dumps available which has a stack trace, 9c52b020 80636ac7 9c52b0bc e1174818 9c52b0c0 nt!_SEH_prolog+0x1a 9c52b038 806379d6 e10378a4 9c52b0bc e1174818 nt!CmpQuerySecurityDescriptorInfo+0x23 9c52b084 805bfe5b e714b160 00000001 9c52b0bc nt!CmpSecurityMethod+0xce 9c52b0c4 805c01c8 e714b160 9c52b0f0 e714b15c nt!ObpGetObjectSecurity+0x99 9c52b0f4 8062f28f e714b160 8617f008 00000001 nt!ObCheckObjectAccess+0x2c 9c52b140 8062ff30 e1038008 0066a710 cde2b714 nt!CmpDoOpen+0x2d5 9c52b340 805bf488 0066a710 0066a710 8617f008 nt!CmpParseKey+0x5a6 9c52b3b8 805bba14 00000000 9c52b3f8 00000240 nt!ObpLookupObjectName+0x53c 9c52b40c 80625696 00000000 8acad448 00000000 nt!ObOpenObjectByName+0xea 9c52b508 8054167c 9c52b828 82000000 9c52b5ac nt!NtOpenKey+0x1c8 9c52b508 80500699 9c52b828 82000000 9c52b5ac nt!KiFastCallEntry+0xfc 9c52b58c 805e701e 9c52b828 82000000 9c52b5ac nt!ZwOpenKey+0x11 9c52b7fc 805e712a 00000002 805e70a0 00000000 nt!RtlpGetRegistryHandleAndPath+0x27a 9c52b844 805e73e3 9c52b864 00000014 9c52bbb8 nt!RtlpQueryRegistryGetBlockPolicy+0x2e 9c52b86c 805e79eb 00000003 e8af79dc 00000014 nt!RtlpQueryRegistryDirect+0x4b 9c52b8bc 805e7f10 e8af79dc 00000003 9c52b948 nt!RtlpCallQueryRegistryRoutine+0x369 9c52bb58 b8f5bca4 00000005 e6024b30 9c52bbb8 nt!RtlQueryRegistryValues+0x482 WARNING: Stack unwind information not available. Following frames may be wrong. 9c52bc00 b8f20a5b 00000005 85f4204c 85f4214c igxpmp32+0x44ca4 9c52c280 b8f1cc7b 890bd358 9c52c2b0 00000000 igxpmp32+0x9a5b 9c52c294 b8f11729 890bd358 9c52c2b0 00000a0c igxpmp32+0x5c7b 9c52c358 804ef19f 890bd040 86d2dad0 0000080c VIDEOPRT!pVideoPortDispatch+0xabf 9c52c368 bf85e8c2 9c52c610 bef6ce84 00000014 nt!IopfCallDriver+0x31 9c52c398 bf85e93c 890bd040 00232150 9c52c3f8 win32k!GreDeviceIoControl+0x93 9c52c3bc bebafc7b 890bd040 00232150 9c52c3f8 win32k!EngDeviceIoControl+0x1f 9c52d624 bebf3fa9 890bd040 bef2a28c bef2a284 igxpdx32+0x8c7b 9c52d6a0 8054167c 9c52da28 b915d000 9c52d744 igxpdx32+0x4cfa9 9c52d6a0 00000000 9c52da28 b915d000 9c52d744 nt!KiFastCallEntry+0xfc How do I ensure that crash is caused by H/W acceleration issue by looking at the above data? I am guessing VIDEOPRT!pVideoPortDispatch+0xabf indicates some error with the rendering. Is that correct? I am using WinDebug to view the crash dump.

  Read the article

• Java Generic Casting Type Mismatch

  - by Kay

  public class MaxHeap<T extends Comparable<T>> implements Heap<T>{ private T[] heap; private int lastIndex; public void main(String[] args){ int i; T[] arr = {1,3,4,5,2}; //ERROR HERE ******* foo } public T[] Heapsort(T[]anArray, int n){ // build initial heap T[]sortedArray = anArray; for (int i = n-1; i< 0; i--){ //assert: the tree rooted at index is a semiheap heapRebuild(anArray, i, n); //assert: the tree rooted at index is a heap } //sort the heap array int last = n-1; //invariant: Array[0..last] is a heap, //Array[last+1..n-1] is sorted for (int j=1; j<n-1;j++) { sortedArray[0]=sortedArray[last]; last--; heapRebuild(anArray, 0, last); } return sortedArray; } protected void heapRebuild(T[ ] items, int root, int size){ foo } } The error is on the line with "T[arr] = {1,3,4,5,2}" Eclispe complains that there is a: "Type mismatch: cannot convert from int to T" I've tried to casting nearly everywhere but to no avail.A simple way out would be to not use generics but instead just ints but that's sadly not an option. I've got to find a way to resolve the array of ints "{1,3,4,5,2}" into an array of T so that the rest of my code will work smoothly.

  Read the article

• PubSubHubBub Hubs

  - by PartlyCloudy

  Hi, I'm currently building a live web application based upon the PubSubHubBub protocol. However, I encountered several issues. First, I'm in search of a hub application that I can run on my server. There are several applications, but most of them are not mature yet, or they don't support the 0.3 spec. The official google hub runs on the Google App Engine and can even be executed locally. Unfortunately, "Tasks will not run automatically. Push the 'Run' button to execute each task." This behaviour is useful for debugging and understanding the workflow, but in some live tests, it would be nice not to invoke all tasks manually. Is there a way to tweak the local app engine due automatically run tasks? Next, I have a question concerning the spec itself. The Google reference implementation provides the initial publish method bound to the outpoint uri + /publish. But this is not reflected in the specs. So are there any mature hubs that can be run locally for debugging? Or are there ways to configure the offical google app engine hub to run locally and to execute tasks directly? Thanks in advance

  Read the article

• does anyone know of good delphi docking components?

  - by X-Ray

  we'd like to add movable panels to an application. presently we've used DevExpress docking library but have found them to be disappointingly quirky & difficult to work with. it also has some limitations that aren't so great. auto-hide, pinning, and moving of pages by drag-and-drop are all features we'd like to use. the built-in delphi docking doesn't seem to be full-featured enough to do the things we need (also see sample below). perhaps i should dig deeper into delphi's docking abilities...my initial impression is that they seem very toolbar-oriented rather than something i can drop a frame into. i'm not experienced at docking topics. my only experience has been with the DevExpress docking library where i needed to programmatically create & dock panels. is it my imagination or are DevExpress's products unduly difficult to use/learn? the DevExpress Ribbon Bar component compared to the d2009 Ribbon Bar was certainly a useful experience. i will migrate to the d2009 Ribbon Bar as soon as convenient to do so. it was refreshingly straight-forward to learn and use. a sharp contrast compared to the DevExpress equivalent. if it takes 4x as longer to make it using the DevExpress equivalent, it's time to change direction. what would you suggest in regard to the docking library? thank you for your suggestions/comments!

  Read the article

• jQuery date picker not persistant after AJAX

  - by ILMV

  So I'm using the jQuery date picker, and it works well. I am using AJAX to go and get some content, obviously when this new content is applied the bind is lost, I learnt about this last week and discovered about the .live() method. But how do I apply that to my date picker? Because this isn't an event therefore .live() won't be able to help... right? This is the code I'm using to bind the date picker to my input: $(".datefield").datepicker({showAnim:'fadeIn',dateFormat:'dd/mm/yy',changeMonth:true,changeYear:true}); I do not want to call this metho everytime my AJAX fires, as I want to keep that as generic as possible. Cheers :-) EDIT As @nick requested, below is my wrapper function got the ajax() method: var ajax_count = 0; function getElementContents(options) { if(options.type===null) { options.type="GET"; } if(options.data===null) { options.data={}; } if(options.url===null) { options.url='/'; } if(options.cache===null) { options.cace=false; } if(options.highlight===null || options.highlight===true) { options.highlight=true; } else { options.highlight=false; } $.ajax({ type: options.type, url: options.url, data: options.data, beforeSend: function() { /* if this is the first ajax call, block the screen */ if(++ajax_count==1) { $.blockUI({message:'Loading data, please wait'}); } }, success: function(responseText) { /* we want to perform different methods of assignment depending on the element type */ if($(options.target).is("input")) { $(options.target).val(responseText); } else { $(options.target).html(responseText); } /* fire change, fire highlight effect... only id highlight==true */ if(options.highlight===true) { $(options.target).trigger("change").effect("highlight",{},2000); } }, complete: function () { /* if all ajax requests have completed, unblock screen */ if(--ajax_count===0) { $.unblockUI(); } }, cache: options.cache, dataType: "html" }); } What about this solution, I have a rules.js which include all my initial bindings with the elements, if I were to put these in a function, then call that function on the success callback of the ajax method, that way I wouldn't be repeating code... Hmmm, thoughts please :D

  Read the article

• Sort and limit queryset by comment count and date using queryset.extra() (django)

  - by thornomad

  I am trying to sort/narrow a queryset of objects based on the number of comments each object has as well as by the timeframe during which the comments were posted. Am using a queryset.extra() method (using django_comments which utilizes generic foreign keys). I got the idea for using queryset.extra() (and the code) from here. This is a follow-up question to my initial question yesterday (which shows I am making some progress). Current Code: What I have so far works in that it will sort by the number of comments; however, I want to extend the functionality and also be able to pass a time frame argument (eg, 7 days) and return an ordered list of the most commented posts in that time frame. Here is what my view looks like with the basic functionality in tact: import datetime from django.contrib.comments.models import Comment from django.contrib.contenttypes.models import ContentType from django.db.models import Count, Sum from django.views.generic.list_detail import object_list def custom_object_list(request, queryset, *args, **kwargs): '''Extending the list_detail.object_list to allow some sorting. Example: http://example.com/video?sort_by=comments&days=7 Would get a list of the videos sorted by most comments in the last seven days. ''' try: # this is where I started working on the date business ... days = int(request.GET.get('days', None)) period = datetime.datetime.utcnow() - datetime.timedelta(days=int(days)) except (ValueError, TypeError): days = None period = None sort_by = request.GET.get('sort_by', None) ctype = ContentType.objects.get_for_model(queryset.model) if sort_by == 'comments': queryset = queryset.extra(select={ 'count' : """ SELECT COUNT(*) AS comment_count FROM django_comments WHERE content_type_id=%s AND object_pk=%s.%s """ % ( ctype.pk, queryset.model._meta.db_table, queryset.model._meta.pk.name ), }, order_by=['-count']).order_by('-count', '-created') return object_list(request, queryset, *args, **kwargs) What I've Tried: I am not well versed in SQL but I did try just to add another WHERE criteria by hand to see if I could make some progress: SELECT COUNT(*) AS comment_count FROM django_comments WHERE content_type_id=%s AND object_pk=%s.%s AND submit_date='2010-05-01 12:00:00' But that didn't do anything except mess around with my sort order. Any ideas on how I can add this extra layer of functionality? Thanks for any help or insight.

  Read the article

• randomized quicksort: probability of two elements comparison?

  - by bantu

  I am reading "Probability and Computing" by M.Mitzenmacher, E.Upfal and I have problems understanding how the probability of comparison of two elements is calculated. Input: the list (y1,y2,...,YN) of numbers. We are looking for pivot element. Question: what is probability that two elements yi and yj (ji) will be compared? Answer (from book): yi and yj will be compared if either yi or yj will be selected as pivot in first draw from sequence (yi,yi+1,...,yj-1,yj). So the probablity is: 2/(y-i+1). The problem for me is initial claim: for example, picking up yi in the first draw from the whole list will cause the comparison with yj (and vice-versa) and the probability is 2/n. So, rather the "reverse" claim is true -- none of the (yi+1,...,yj-1) elements can be selected beforeyi or yj, but the "pool" size is not fixed (in first draw it is n for sure, but on the second it is smaller). Could someone please explain this, how the authors come up with such simplified conclusion? Thank you in advance

  Read the article

< Previous Page | 350 351 352 353 354 355 356 357 358 359 360 361  | Next Page >