Search Results

Search found 13347 results on 534 pages for 'embedded device'.

Page 355/534 | < Previous Page | 351 352 353 354 355 356 357 358 359 360 361 362  | Next Page >

• 8Gb Fiber Channcel HBA vs. 10 Gb SPF+ Converged HBA

  - by Hossein Aarabi

  I am putting a Dell server together, more specifically R720. I have to select the correct Host Bus Adapter. This HBA on R710 will connect to a storage device. I am confused between these two: QLogic 2562, Dual Port 8Gb Optical Fiber Channel HBA (price $2,045) QLogic 8262, Dual Port 10Gb SFP+, Converged Network Adapter (price $1,618) I thought since the QLogic 2562 is a fiber channel and is more expensive then it is faster in terms of IOPS. But, it is a 8Gb as opposed to 10 Gb of SFP+. My questions: Which one is better (IOPS performance, etc.)? Why should I choose one over another?

  Read the article

• Windows Cannot Boot - 0xc0000225

  - by B__

  I've had Windows 7 installed for months on my Thinkpad T60 laptop and today out of the blue when I tried to boot, it started the Windows loading screen and immediately I got this error: Status: 0xc0000225 Info: The boot selection failed because a required device is inaccessible. Through some research, I see people get this problem when a repartitioning goes wrong or there's a problem with their dual boot. I'm not dual booting my machine and I haven't messed with my partitions since I installed the OS. This error is truly out of the blue. I've run memory diagnostics from a Windows boot disc and hard drive diagnostics from my BIOS and neither found a problem. I don't have any backups to restore from so I'm hoping to find a fix for this. Anyone seen this kind of thing before? Thanks

  Read the article

• Is there a good dual monitor arm solution for iMac 27" i7s?

  - by Darren Newton

  I currently have an iMac 27" and am considering purchasing another to run in target display mode. My desk space is a little limited. Is there a dual monitor arm solution that can support the weight of two iMac 27" units (30.5 pounds (13.8 kg)) as well as their width (25.6 inches (65.0 cm)) in a side-by-side landscape configuration? I looked at the Ergotron LX Dual Side by Side but the iMacs appear to exceed the width and weight limit this device is rated for. I'm open to alternate solutions to arms, such as a multi-unit desk stand/mount, but a wall mount is not possible for me at this time. Thanks!

  Read the article

• Getting a list of patches in an HPSA patch policy

  - by asm

  I'm trying to get a list of patches contained in a Patch Policy in HPSA -- I can get what I need via the Twister web interface (under PatchPolicy.getPatches(), give it an ID, and it happily returns a list of patches contained.) -- I'm having a hard time getting this to work via the Pytwist interface, though... I haven't used the Pytwist interface for much besides some very basic Device manipulation, and Python is.. not my forte. I create the TwistServer object, then a PatchPolicy object from that (which I think is working..), but can't figure out how/where to call the getPatches() method from in Python-land. If there's a way to dig this out of the database itself, that would work, too, but I can't seem to find much in there along these lines besides the vendor-recommended patching stuff, and we use custom policies.

  Read the article

• Network Scanning: HP Laserjet 2840 & Windows 7 (+ Linux?)

  - by Eddie Parker

  I own a HP Laserjet 2840 multifunction printer. It's a fabulous device, but on Windows 7 it can't network scan. HP doesn't seem to support it in anything greater than Vista, and they aren't forth coming with solutions. I'm curious if anyone else has gotten work arounds to this problem. One possible avenue for me is that I have an always-on Gentoo server that is configured to see the printer as a fax and printer using hplip. I have this shared via samba and I can print just fine through samba. Is there a similar way I can do network scanning? Anyone know of where I start looking for this?

  Read the article

• ndiswrapper wlan driver installed, but wlan still does not work

  - by mugetsu

  I'm trying to get my Atheros AR1111 EB-WG PCI wireless adapter to work. Right now wifi is not even detected. I'm on ubuntu 12.04 64bit and I managed to find a xp64bit driver. I followed the exact steps here: https://help.ubuntu.com/community/WifiDocs/Driver/Ndiswrapper And where I do ndiswrapper -l I get something like : {name of driver} : driver installed device ({Chipset ID}) present which shows that the driver installed properly However, after I load the new module : sudo modprobe ndiswrapper nothing happens, and iwconfig shows that I still have no wlan. I tried to do dmseg | grep ndiswrapper, but there were no driver loading errors or anything strange. I also have blacklist ath5k, ath8k in /etc/modprobe.d/blacklist.conf What am I doing wrong? What could be causing this?

  Read the article

• read and write permission for FAT32 partition in Ubuntu

  - by Dean

  This is a strange problem. I have the following partition table Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 5737 45978624 7 HPFS/NTFS /dev/sda3 5738 10600 39062047+ 83 Linux /dev/sda4 10601 19457 71143852+ 5 Extended /dev/sda5 10601 11208 4883728+ 82 Linux swap / Solaris /dev/sda6 11209 15033 30720000 b W95 FAT32 /dev/sda7 15033 19457 35537920 7 HPFS/NTFS I dual boot Win7 (sda2) and Ubuntu (sda3) and wanted to use the FAT23 partition to share files across two OS's. I followed some online tutorial and have done these: sudo mkdir /media/FAT32 sudo chmod 777 /media/FAT32 sudo mount /dev/sda6/ /media/FAT32 after I mounted the file, I can only read but not be able to write to it. I checked the file permission, it becomes: drwxr-xr-x but after I unmounted the it then becomes drwxrwxrwx and I can read and write to it. very strange. I don't know where I've down wrong. Cheers.

  Read the article

• Setting up Lan within a Lan

  - by nageeb

  How unreasonable would it be to setup a small LAN within an existing LAN? I'm setting up a series of video surveillance servers and a number of IP cameras in a client's location and cannot have my equipment on the same network as their local machines. My network is essentially self-contained and the only device that anyone needs to access is a web-app on one of the machines. Basically I'm thinking of installing a SOHO router which would uplink to their LAN, and then set up some NAT rules on both their router and my router, to allow outside access to the webserver. Is there anything fundamental that i'm missing which would prevent this from working?

  Read the article

• Sony VAIO TZ2 internal camera and Windows XP

  - by user34300

  I have a Sony Vaio TZ2 laptop here and I'm trying to install Windows XP SP3 on it. Everything works fine except of the integrated camera which is supposed to be a USB device but is absent in the Devoice Manager. I've read that it is important in what order you install drivers when you downgrade this Vista preinstalled model to Windows XP so I repeated once again the installation with the correct order by still had no luck with the camera. Can someone give me an advice on how to woke up this camera? Thanks!

  Read the article

• Windows Ce 6.0 loses Windows credentials when viewing a web site that's running on Windows 2008 server

  - by gnomixa

  When a user views a web page (with integrated Windows authentication) on WindowsCE 6.0 device, the authentication is lost sporadically. The page being viewed is running on Windows 2008 server. We never had the same issue with Windows 2003 server. The credentials were being asked once and cached for a certain time. My question is: has anything changed in Windows 2008 that doesn't pass the credentials the same way to WindowsCE? The only variable in this scenario is the web server OS - Windows 2003 vs WIndows 2008. Any help would be appreciated, thanks!

  Read the article

• how to multi-boot/upgrade linux from LVM-based partition

  - by kenny-bobby

  i currently have FC3 linux which installed itself on the hard disk using LVM partitioning, so it is basically all one big partition. i would like to try some other distributions and upgrade to something newer, but don't want to lose my current capabilities and data files, and i know nothing or less about LVM. Is it possible (and if so an example would be nice) to install a non-LVM-based distribution on the LVM disk and have multi-boot options? Or do i have to start over new and drop the LVM? My guess is that i should save my /home (data files and .rc files) on a backup device first, then somewhere/somehow create a new partion for installing another distribution. Any LVM experts out there that have tried anything like this--well i sure could use some pointers and advice...

  Read the article

• howto copy files on esxi datastore using scp?

  - by maruti

  how to copy files on esxi4 datastore (fs=vmfs) over network using console (SSH)? giving up older question:have seen on vmware forums that its not possible have a USB drive NTFS attached to ESXi4 host. fdisk -l shows the device as /dev/mpx.... but when i try to mount that using mount /dev/xxx /mnt/usbdisk....it fails with message "no such file or dir" could anyone help with correct entry in etc/fstab? all that i am trying to do is backup the vms on esxi host to usb disk...thanks in advance there is a dir called usbdrv, tried cp of vmdk file here but failed

  Read the article

• Redundancy and Automated failover using Forefront TMG 2010 Standard between Production-DR site ?

  - by Albert Widjaja

  Hi, I'm using MS TMG 2010 Standard as my single firewall to publish my Exchange Server and IIS website to the internet, however it is just one VM in the DMZ network with just one network card (vNIC), what sort of redundancy method that is suitable for making this firewall VM redundant / automatically failover in my DR site ? Because it is very important in the event of disaster recovery all important email through various mobile device will still need to operate and it is impossible if this TMG 2010 VM is offline. is it by using: 1. Multicast NLB 2. Any other clustering 3. VMware HA / FT (one VM in production, the other VM in DR site with different subnet ?) Any suggestion and idea willl be appreciated. Thanks

  Read the article

• Can't create VM with virt-install on Debian wheezy

  - by chrismacp

  Cant find any answers anywhere so here goes. I am trying to CREATE a new virtual machine using the virt-install command from a console on a Debian wheezy install. I keep getting the following output: Starting install... ERROR internal error process exited while connecting to monitor: char device redirected to /dev/pts/1 inet_listen_opts: bind(ipv4,127.0.0.1,5951): Cannot assign requested address inet_listen_opts: FAILED I assumed that the port (5951 in this case) was being used judging by the error message and other sites I visited for an answer, but the same error occurs whatever number I use for the port. I cant see that port being listened upon in netstat either. Anyone have any ideas what may be wrong?

  Read the article

• Route additional network through Sonicwall site-to-site VPN

  - by Brandon

  I have a sonicwall site to site vpn. At one of the sites there is another Cisco vpn to another site. I need to route the traffic for the cisco vpn through the site to site from the other sonicwall site. Site A - 10.10.0.0 /16 network Site B - 192.168.1.0 /24 Sonicwall, A cisco vpn is on 192.168.1.226 address and has routes the 10.10.0.0 network to Site A. Site C - 192.168.2.0 /24 Sonicwall Site A-B VPN is working Site B-C VPN is working I need to get Site C to transmit the 10.10.0.0 traffic over the VPN to site B and then out the Cisco device.

  Read the article

• Linux partitioning problem

  - by Claudiu

  I am using cfdisk to repartition my hdd as from OS install I only got 1 big partition a swap. I wanted to resize the big partition to 1 GB /boot and use the rest of the space for an extended partition. After I do cfdisk, I recheck the partitions with fdisk -l and I get these: Disk /dev/sda: 320 GB, 320070320640 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda3 1 38455 308881755 f Extended LBA Warning: Partition 3 does not end on cylinder boundary. /dev/sda2 38455 38698 1951897 82 Linux swap /dev/sda1 * 38699 38913 311349654 83 Linux My problem is the Warning message, I think I know the cause, I think its because of sda1 Blocks size. How could that be soo big if Start and End interval is small?

  Read the article

• OpenVPN DNS: VPN DNS stomping local VPN

  - by Eddie Parker

  I've finally noodled with OpenVPN enough to get it working. Even better, I can mount samba drives, ping network machines through the TUN device, etc - it's all great. However, I'm noticing that if I use the following directive, then some of the machines that are normally visible by the client, on the client's side (i.e., not through the VPN) get masked with some other server out on the Internet. push "dhcp-option DNS 10.0.1.1" # Push our local DNS to clients Is there any way to avoid this, besides hacking the 'hosts' file on the client machine? Ideally I'd like to only use my VPN's DNS for machines within that domain.

  Read the article

• Migrating from DD-WRT to Tomato

  - by Collin Allen

  Is it possible to switch to the latest version of Tomato on a router that's already running DD-WRT? Using the default Linksys firmware on my WRT54GL v1.1, I had to upload a micro version of DD-WRT first. I imagine that, since I'm now running third-party firmware, I won't have to do that again to make the switch, but I thought I should check so as not to brick it. This router is taking a back seat to a new AirPort Extreme (for the 'n' capability), but I still want to have the soon-to-be-Tomato device sit between the AirPort Extreme and my modem for the superior traffic graphing.

  Read the article

• Windows with putty via USB serial cable to Linux serial port - output ok, input isn't

  - by Aharon Robbins

  I am trying to get two way serial communications going between a Windows XP system and a Linux system (RHEL 5). I have /sbin/agetty -L 9600 ttyS0 in /etc/inittab. I am using a generic USB to serial adaptor on Windows (Unitek) and a null modem cable. I have putty configured for 9600 baud, 8 bits, no parity, one stop bit, no flow control. I get the login prompt from agetty in the putty window but input does not work; I see weird characters in the putty screen. I can echo output into the device from windows and see it, but cat < /dev/ttyS0 just prints out weird characters from what I type. Any and all suggestions will be welcome. Thanks!

  Read the article

• How to permanently add wireless interfaces with iw

  - by walli

  How can I permanently add virtual wireless interfaces to my network configuration with iw? I created the following interfaces: iw phy phy0 interface add vwlan0 type station iw phy phy0 interface add vwlan1 type __ap The first is configured as a wifi client connecting to an existing network (wpa_supplicant) The second is configured as wireless hotspot (hostapd + dnsmasq) The setup works, but now I can't quite figure out what the best strategy is to save this configuration permanently. Have made an init script for wpa_supplicant Have made an init script for the hotspot Virtual adaptor network settings set in /etc/network/interfaces But all this depends on the wireless interfaces being created. What would be the best way to make sure these interfaces are created before the network is set up and the services are run? As a bonus, since this wireless interface is a usb device, would it be possible to have the interfaces created (and the services started) when the interface is hotplugged? I know you can execute code after a network interface is up, but the wlan0 interface that is hotplugged should never be up. Operating system is raspbian

  Read the article

• ECMP Load Balancing in JUNOS

  - by SpacemanSpiff

  I'm trying to figure out how to use ECMP load balancing in JUNOS. I know this isn't the best way to load balance, but its quick and dirty and gets done what I need to. In ScreenOS this was pretty easy. Device: SRX220 JunOS: 10.3R2.11 Here's what I've got so far: routing-options { static { route 0.0.0.0/0 { next-hop [ 1.1.1.1 1.1.1.2 ]; metric 10; } } maximum-paths 2; Will that do it? Tom

  Read the article

• Unix list absolute file name

  - by Matthew Adams

  Given an arbitrary single argument representing a file (or directory, device, etc), how do I get the absolute path of the argument? I've seen many answers to this question involving find/ls/stat/readlink and $PWD, but none that suits my need. It looks like the closest answer is ksh's "whence" command, but I need it to work in sh/bash. Assume a file, foo.txt, is located in my home directory, /Users/matthew/foo.txt. I need the following behavior, despite what my current working directory is (I'm calling the command "abs"): (PWD is ~) $ abs foo.txt /Users/matthew/foo.txt $ abs ~/foo.txt /Users/matthew/foo.txt $ abs ./foo.txt /Users/matthew/foo.txt $ abs /Users/matthew/foo.txt /Users/matthew/foo.txt What would "abs" really be? TIA, Matthew

  Read the article

• Linux Kernel Messages: ata1.00: status: { DRDY ERR }

  - by PM

  I am receiving a lot of these messages. Is my HD going to die tomorrow morning? ata1: link is slow to respond, please be patient (ready=0) ata1: device not ready (errno=-16), forcing hardreset ata1: soft resetting link ata1: clearing spurious IRQ ata1: clearing spurious IRQ ata1: clearing spurious IRQ ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: qc timeout (cmd 0xa0) ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)

  Read the article

• Unable to browse Server 2008R2 from XP clinets

  - by Dave M

  We have just deployed a Windows 2008R2 server in our Windows 2003 domain. XP clinets are unable to browse in "entire network" and find the new server. It can be accessed by entering \\servername and it can be pinged by name and IP address. Users access shares without issue. Netbios over TCP/IP is enabled. Computer browser is running on the Windows 2008R2 system. Turn on Network Discovery is enabled. These services were started as a result of an MS article Computer Browser DNS Client Function Discovery Resource Publication SSDP Discovery UPnP Device Hosts

  Read the article

• Turn Windows Event Logs EVT files into Syslog to send to LogLogic

  - by TrevJen

  I have a a requirement to analyze 13gb of Windows logs by feeding it into a LogLogic Log aggregator. LogLogic is essentially Linux Syslog server, it can take a Syslog (Tcp/udp 514) feed or log on to a windows share and pull a flat file log. The only problem is that it cannot read the binary .EVT files from Windows Event logs. Normally, I would use Lasso to end the logs to a loglogic as syslog, but it has to read the logs from WMI and uses the DLLs on the log source host to format them and transmit them as syslog in the formatting that LogLogic expects. Does anyone know: A. Is there some kind of product out there to do this? or - B. Is there some way to import them into a Windows event veiwer in a way that lasso (or snare for that matter) will see them as actual real event logs on that host and forward them to the loglogic device as syslog.

  Read the article

< Previous Page | 351 352 353 354 355 356 357 358 359 360 361 362  | Next Page >