device instance id - Page 357

Bridged virtual interface is not available or visible to ifconfig.

- by Omniwombat

Hello all. I'm running Ubuntu 9.04, kernel 2.6.28-18, and vmware-server 2.0.1. I'm attempting to setup a virtual linux machine to use a bridged interface rather than NAT or host-only. Both NAT and host-only work just fine. When running vmware-config.pl, I set /dev/vmnet0 to bridge eth0, /dev/vmnet1 to host-only, and /dev/vmnet8 to NAT. When I run ifconfig -a I see the physical interface (eth0), vmnet1 and vmnet8 both of which are up and have IP addresses assigned to them. I also see other various interfaces that are not relevant here. In the web console, when I ask that the guest machine's network card be bridged, it states that a bridged setup is "Not available" and shows the disabled device icon. Inside the guest machine, I do have an eth0 interface which I can set to anything I like, however it can't see my external network, or the host. I do see errors in my vmware/hostd.log which state: "The network bridge on device vmnet0 is not running. The virtual machine will not be able to communicate with the host or with other machines on your network" which confirms the problem. vmnet-bridge is running, and I see the following in my process table: /usr/bin/vmnet-bridge -d /var/run/vmnet-bridge-0.pid -n 0 -i eth0 I confirm that the /var/run/vmnet-bridge-0.pid file is there and that it points to the correct process. I saw this question relating to Ubuntu 9.04 and bridged interfaces, in which the poster determined that the vsock library was not getting built due to a flaw in the vmware-config.pl script. I applied the patch, reran the script, and confirm that vsock.ko and vsock.o are in my /lib directory structure. vsock does show up in an lsmod. My /etc/vmware directory has /vmnet1 and /vmnet8 subdirectories. They contain configuration utilities for running DHCP and nat type services as expected. There is no vmnet0 subdirectory. My /etc/vmware/netmap.conf file DOES show entries for vmnet0; both the name and the device as I configured it from the script. My /dev directory contains devices vmnet0 through vmnet9. They have major device number 119, and minor device numbers 0 through 9. /proc/net/dev shows statistics for vmnet1 and vmnet8, but not vmnet0. I have a /proc/vmnet directory, but it's empty. When I start or stop the vmware service with /etc/init.d/vmware start, I see the following: Starting VMware services: Virtual machine monitor done Virtual machine communication interface done VM communication interface socket family: done Virtual ethernet done Bridged networking on /dev/vmnet0 done Host-only networking on /dev/vmnet1 (background) done DHCP server on /dev/vmnet1 done Host-only networking on /dev/vmnet8 (background) done DHCP server on /dev/vmnet8 done NAT service on /dev/vmnet8 done VMware Server Authentication Daemon (background) done Shared Memory Available done Starting VMware management services: VMware Server Host Agent (background) done VMware Virtual Infrastructure Web Access Starting VMware autostart virtual machines: Virtual machines done Nothing appears to be wrong there. What n00b thing am I doing such that vmnet0 and only vmnet0 does not show up in the interface list?

Read the article

XFS disk becomes unavailable after a while

- by Guard

Ubuntu 12.04 (but the same was on 11.10 before upgrading) WD MyBook, 2TB, no RAID (or RAID0, not completely sure, anyway no mirroring, both 1TB disks are in use, mounted as a single device). Formatted to XFS, normally used for big movie files. Connected to Firewire 800. At some point the LED started going up and down as when constantly reading/writing. The device gives access error. When unplugged (cable, then holding the power button for a while, then unplugging the power) and re-connected becomes available. xfs_check with no results. xfs_repair did something, but looks like didn't fix any error. Then after a massive read (checking 1.5GB torrent file for integrity) becomes unavailable again. Any ideas what's wrong? Drives? Cables? Motherboard? OS? UPD: not sure how relevant this is, but here are dmesg output [14380.632816] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [14380.633356] SGI XFS Quota Management subsystem [14421.812220] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [14441.890596] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [14441.896858] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [14453.895347] firewire_core: created device fw1: GUID 0090a99500a35518, S400, 9 config ROM retries [14453.904818] scsi6 : SBP-2 IEEE-1394 [14453.905014] scsi7 : SBP-2 IEEE-1394 [14454.139993] firewire_sbp2: fw1.0: logged in to LUN 0000 (0 retries) [14454.158769] scsi 6:0:0:0: Direct-Access WD My Book 1015 PQ: 0 ANSI: 4 [14454.159251] sd 6:0:0:0: Attached scsi generic sg3 type 0 [14454.162391] firewire_sbp2: fw1.1: logged in to LUN 0001 (0 retries) [14454.167453] sd 6:0:0:0: [sdc] 3907017568 512-byte logical blocks: (2.00 TB/1.81 TiB) [14454.178822] sd 6:0:0:0: [sdc] Write Protect is off [14454.178826] sd 6:0:0:0: [sdc] Mode Sense: 10 00 00 00 [14454.186830] scsi 7:0:0:1: Enclosure WD My Book Device 1015 PQ: 0 ANSI: 4 [14454.186995] scsi 7:0:0:1: Attached scsi generic sg4 type 13 [14454.190078] sd 6:0:0:0: [sdc] Cache data unavailable [14454.190087] sd 6:0:0:0: [sdc] Assuming drive cache: write through [14454.202176] sd 6:0:0:0: [sdc] Cache data unavailable [14454.202185] sd 6:0:0:0: [sdc] Assuming drive cache: write through [14454.239940] sdc: [mac] sdc1 sdc2 sdc3 sdc4 [14454.271262] sd 6:0:0:0: [sdc] Cache data unavailable [14454.271270] sd 6:0:0:0: [sdc] Assuming drive cache: write through [14454.271354] sd 6:0:0:0: [sdc] Attached SCSI disk [14454.272149] ses 7:0:0:1: Attached Enclosure device [14606.090024] XFS (sdc3): Mounting Filesystem [14612.048343] XFS (sdc3): Starting recovery (logdev: internal) [14620.697636] XFS (sdc3): Ending recovery (logdev: internal) [14748.120957] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [14748.120963] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [14752.568382] uhci_hcd 0000:00:1a.0: PCI INT A disabled [14752.568579] uhci_hcd 0000:00:1a.1: PCI INT B disabled [14752.568738] ehci_hcd 0000:00:1a.7: PCI INT C disabled [14752.568779] ehci_hcd 0000:00:1a.7: PME# enabled [14752.584526] uhci_hcd 0000:00:1d.1: PCI INT B disabled [14752.584689] uhci_hcd 0000:00:1d.2: PCI INT C disabled [14752.680079] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xe4641000-0xe46413ff] (PCI address [0xe4641000-0xe46413ff]) [14752.680104] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x30b) [14752.680136] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [14752.680170] ehci_hcd 0000:00:1a.7: PME# disabled [14752.680182] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [14752.680190] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [14752.710334] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [14752.710342] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [14752.749186] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [14752.749194] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [14752.790231] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [14752.790239] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [14752.829170] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [14752.829178] uhci_hcd 0000:00:1d.2: setting latency timer to 64

Read the article

How to create a link to Nintex Start Workflow Page in the document set home page

- by ybbest

In this blog post, I’d like to show you how to create a link to start Nintex Workflow Page in the document set home page. 1. Firstly, you need to upload the latest version of jQuery to the style library of your team site. 2. Then, upload a text file to the style library for writing your own html and JavaScript 3. In the document set home page, insert a new content editor web part and link the text file you just upload. 4. Update the text file with the following content, you can download this file here. <script type="text/javascript" src="/Style%20Library/jquery-1.9.0.min.js"></script> <script type="text/javascript" src="/_layouts/sp.js"></script> <script type="text/javascript"> $(document).ready(function() { listItemId=getParameterByName("ID"); setTheWorkflowLink("YBBESTDocumentLibrary"); }); function buildWorkflowLink(webRelativeUrl,listId,itemId) { var workflowLink =webRelativeUrl+"_layouts/NintexWorkflow/StartWorkflow.aspx?list="+listId+"&ID="+itemId+"&WorkflowName=Start Approval"; return workflowLink; } function getParameterByName(name) { name = name.replace(/[\[]/, "\\\[").replace(/[\]]/, "\\\]"); var regexS = "[\\?&]" + name + "=([^&#]*)"; var regex = new RegExp(regexS); var results = regex.exec(window.location.search); if(results == null){ return ""; } else{ return decodeURIComponent(results[1].replace(/\+/g, " ")); } } function setTheWorkflowLink(listName) { var SPContext = new SP.ClientContext.get_current(); web = SPContext.get_web(); list = web.get_lists().getByTitle(listName); SPContext.load(web,"ServerRelativeUrl"); SPContext.load(list, 'Title', 'Id'); SPContext.executeQueryAsync(setTheWorkflowLink_Success, setTheWorkflowLink_Fail); } function setTheWorkflowLink_Success(sender, args) { var listId = list.get_id(); var listTitle = list.get_title(); var webRelativeUrl = web.get_serverRelativeUrl(); var startWorkflowLink=buildWorkflowLink(webRelativeUrl,listId,listItemId) $("a#submitLink").attr('href',startWorkflowLink); } function setTheWorkflowLink_Fail(sender, args) { alert("There is a problem setting up the submit exam approval link"); } </script> <a href="" target="_blank" id="submitLink"><span style="font-size:14pt">Start the approval process.</span></a> 5. Save your changes and go to the document set Item, you will see the link is on the home page now. Notes: 1. You can create a link to start the workflow using the following build dynamic string configuration: {Common:WebUrl}/_layouts/NintexWorkflow/StartWorkflow.aspx?list={Common:ListID}&ID={ItemProperty:ID}&WorkflowName=workflowname. With this link you will still need to click the start button, this is standard SharePoint behaviour and cannot be altered. References: http://connect.nintex.com/forums/27143/ShowThread.aspx How to use html and JavaScript in Content Editor web part in SharePoint2010

Read the article

PowerShell Control over Nikon D3000 Camera

My wife got me a Nikon D3000 camera for Christmas last year, and Im loving it but still trying to wrap my head around some of its features. For instance, when you plug it into a computer via USB, it doesnt show up as a drive like most cameras Ive used to, but rather it shows up as Computer\D3000. After a bit of research, Ive learned that this is because it implements the MTP/PTP protocol, and thus doesnt actually let Windows mount the cameras storage as a drive letter. Nikon describes the use of the MTP and PTP protocols in their cameras here. What Im really trying to do is gain access to the cameras file system via PowerShell. Ive been using a very handy PowerShell script to pull pictures off of my cameras and organize them into folders by date. Id love to be able to do the same thing with my Nikon D3000, but so far I havent been able to figure out how to get access to the files in PowerShell. If you know, Id appreciate any links/tips you can provide. All I could find is a shareware product called PTPdrive, which Im not prepared to shell out money for (yet). (and yes you can do much the same thing with Windows 7s Import Pictures and Videos wizard, which is pretty good too) However, in my searching, I did find some really cool stuff you can do with PowerShell and one of these cameras, like actually taking pictures via PowerShell commands. Credit for this goes to James ONeill and Mark Wilson. Heres what I was able to do: Taking Pictures via PowerShell with D3000 First, connect your camera, turn it on, and launch PowerShell. Execute the following commands to see what commands your device supports. $dialog = New-Object -ComObject "WIA.CommonDialog" $device = $dialog.ShowSelectDevice() $device.Commands You should see something like this: Now, to take a picture, simply point your camera at something and then execute this command: $device.ExecuteCommand("{AF933CAC-ACAD-11D2-A093-00C04F72DC3C}") .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Imagine my surprise when this actually took a picture (with auto-focus): Imagine what you could do with a camera completely under the control of your computer Time-lapse photography would be pretty simple, for instance, with a very simple loop that takes a picture and then sleeps for a minute (or whatever time period). Hooked up to a laptop for portability (and an A/C power supply), this would be pretty trivial to implement. I may have to give it a shot and report back. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

How did my email end up in spam? Spam only filters this specific email, other email contents work

- by mugetsu

My website has users buy our products and when the purchase completes, it sends the user an email. However, this email always ends up in spam! When the user first registers, the site also sends an email, this email however is not filtered and goes into the normal inbox. I'm not quite sure why this is so, gmail vaguely tells me that " It's similar to messages that were detected by our spam filters." So I'm thinking that I need to reword the following email better. Can I get some tips? Or could something else be causing this? thanks! here's the unformatted email: Delivered-To: [email protected] Received: by 10.112.32.98 with SMTP id h2csp61953lbi; Tue, 20 Mar 2012 21:09:13 -0700 (PDT) Received: by 10.180.79.72 with SMTP id h8mr22836827wix.1.1332302953175; Tue, 20 Mar 2012 21:09:13 -0700 (PDT) Return-Path: <[email protected]> Received: from mail26.elasticemail.org (mail26.elasticemail.org. [178.32.180.26]) by mx.google.com with SMTP id 6si518487wiz.41.2012.03.20.21.09.12; Tue, 20 Mar 2012 21:09:12 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 178.32.180.26 as permitted sender) client-ip=178.32.180.26; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 178.32.180.26 as permitted sender) [email protected]; dkim=pass [email protected] DKIM-Signature: v=1; a=rsa-sha1; bh=qjc8jxQuGy9pLN1YV9TR2PHQYKg=; c=relaxed/relaxed; d=website.com; s=api; h=DomainKey-Signature:MIME-Version:From:To:List-Unsubscribe:Subject:Date:Reply-To:Message-ID:Content-Type; b=Odt+nYhjntXPl7JPVHeJWjkStemt6so+FPVYY6oMKziMFzmW8YiLhN8WwSLY0faMcn/rirKsO2dOm/kvcHlqUJC7ldhaydE6bPekkBDa9kBovlGwPNm6xy9QWPP9I1fXDLDCwqqeAXv8kN0daXbh3pVyqWNUOk5cgQ35OgpQpKI= DomainKey-Signature: q=dns; a=rsa-sha1; c=simple; d=website.com; s=api; h=MIME-Version:X-Mailer:From:To:X-Priority:List-Unsubscribe:Subject:Date:Reply-To:Message-ID:Content-Type; b=F7NNZIEyEV+64uYD8pVpe91WLP19Tw2Whk4OKpkLeAfkmrNIA7AjP0XYU1JWTlEyibHQJjjbhR62I3MvVJBSGp75eWfOuwb2AqYWZ/jAlMWznnfQLVv7OlYJsErGxYP6GUNNcuJaqlTPFDanJwtaEvR+tqXZRB7xrUisMd8lq2I= MIME-Version: 1.0 X-Mailer: email.website.com From: "Website Contact" <[email protected]> To: [email protected] X-Priority: 3 (Normal) List-Unsubscribe: <http://email.website.com/tracking/unsubscribe?msgid=su6g-8kfd0s0g>, <mailto:[email protected]?subject=unsubscribe> Subject: Website Tickets: event Date: Wed, 21 Mar 2012 04:09:17 +0000 Reply-To: "Website Contact" <[email protected]> Message-ID: <[email protected]> Content-Type: multipart/alternative; boundary="----=_NextPart_000_3F77_7A0DF805.A8C886C0" ------=_NextPart_000_3F77_7A0DF805.A8C886C0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 SGVsbG8hIAoKIEhlcmUgYXJlIHlvdXIgdGlja2V0KHMpIGZvciBDVEFTIGVDc1RBU3kgMjAxMjog CgpodHRwczovL2NhbXB1c2FtcC5jb20vP3RpY2tldHMvNy95aGloZ3Znd3Z3cWR3cXhtdnQKClNp bXBseSBicmluZyBpdCB3aXRoIHlvdSBvbiB5b3VyIHNtYXJ0cGhvbmUsIG9yIHByaW50IHRoZSB0 aWNrZXQgb3V0IHRvIGJlIHNjYW5uZWQgYXQgdGhlIGV2ZW50LiBFbmpveSwgYW5kIHdlIGFwcHJl Y2lhdGUgeW91ciBwdXJjaGFzZS4KClNpbmNlcmVseSwKVGhlIENhbXB1c0FtcCBUZWFt ------=_NextPart_000_3F77_7A0DF805.A8C886C0 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: base64 SGVsbG8hIDxici8+PGJyLz4gSGVyZSBhcmUgeW91ciB0aWNrZXQocykgZm9yIENUQVMgZUNzVEFT eSAyMDEyOjxici8+PGEgaHJlZj0iaHR0cDovL2VtYWlsLmNhbXB1c2FtcC5jb20vdHJhY2tpbmcv Y2xpY2s/bXNnaWQ9c3U2Zy04a2ZkMHMwZyZ0YXJnZXQ9aHR0cHMlM2ElMmYlMmZjYW1wdXNhbXAu Y29tJTJmJTNmdGlja2V0cyUyZjclMmZ5aGloZ3Znd3Z3cWR3cXhtdnQiPiBodHRwczovL2NhbXB1 c2FtcC5jb20vP3RpY2tldHMvNy95aGloZ3Znd3Z3cWR3cXhtdnQgIDwvYT4gPGJyLz48YnIvPlNp bXBseSBicmluZyBpdCB3aXRoIHlvdSBvbiB5b3VyIHNtYXJ0cGhvbmUsIG9yIHByaW50IHRoZSB0 aWNrZXQgb3V0IHRvIGJlIHNjYW5uZWQgYXQgdGhlIGV2ZW50LiBFbmpveSwgYW5kIHdlIGFwcHJl Y2lhdGUgeW91ciBwdXJjaGFzZS48YnIvPjxici8+U2luY2VyZWx5LDxici8+VGhlIENhbXB1c0Ft cCBUZWFtPGltZyBzcmM9Imh0dHA6Ly9lbWFpbC5jYW1wdXNhbXAuY29tL3RyYWNraW5nL29wZW4/ bXNnaWQ9c3U2Zy04a2ZkMHMwZyIgc3R5bGU9IndpZHRoOjFweDtoZWlnaHQ6MXB4IiBhbHQ9IiIg Lz4= ------=_NextPart_000_3F77_7A0DF805.A8C886C0--

Read the article

Surface Review from Canadian Guy Who Didn’t Go To Build

- by D'Arcy Lussier

I didn’t go to Build last week, opted to stay home and go trick-or-treating with my daughters instead. I had many friends that did go however, and I was able to catch up with James Chambers last night to hear about the conference and play with his Surface RT and Nokia 920 WP8 devices. I’ve been using Windows 8 for a while now, so I’m not going to comment on OS features – lots of posts out there on that already. Let me instead comment on the hardware itself. Size and Weight The size of the tablet was awesome. The Windows 8 tablet I’m using to reference this against is the one from Build 2011 (Samsung model) we received as well as my iPad. The Surface RT was taller and slightly heavier than the iPad, but smaller and lighter than the Samsung Win 8 tablet. I still don’t prefer the default wide-screen format, but the Surface RT is much more usable even when holding it by the long edge than the Samsung. Build Quality No issues with the build quality, it seemed very solid. But…y’know, people have been going on about how the Surface RT materials are so much better than the plastic feeling models Samsung and others put out. I didn’t really notice *that* much difference in that regard with the Surface RT. Interesting feature I didn’t expect – the Windows button on the device is touch-sensitive, not a mechanical one. I didn’t try video or anything, so I can’t comment on the media experience. The kickstand is a great feature, and the way the Surface RT connects to the combo case/keyboard touchcover is very slick while being incredibly simple. What About That Touch Cover Keyboard? So first, kudos to Microsoft on the touch cover! This thing was insanely responsive (including the trackpad) and really delivered on the thinness I was expecting. With that said, and remember this is with very limited use, I would probably go with the Type Cover instead of the Touch Cover. The difference is buttons. The Touch Cover doesn’t actually have “buttons” on the keyboard – hence why its a “touch” cover. You tap on a key to type it. James tells me after a while you get used to it and you can type very fast. For me, I just prefer the tactile feeling of a button being pressed/depressed. But still – typing on the touch case worked very well. Would I Buy One? So after playing with it, did I cry out in envy and rage that I wasn’t able to get one of these machines? Did I curse my decision to collect Halloween candy with my kids instead of being at Build getting hardware? Well – no. Even with the keyboard, the Surface RT is not a business laptop replacement device. While Office does come included, you can’t install any other applications outside of Windows Store Apps. This might be limiting depending on what other applications you need to have available on your computer. Surface RT is a great personal computing device, as long as you’re not already invested in a competing ecosystem. I’ve heard people make statements that they’re going to replace all the iPads in their homes with Surface tablets. In my home, that’s not feasible – my wife and daughters have amassed quite a collection of games via iTunes. We also buy all our music via iTunes as well, so even with the XBox streaming music service now available we’re still tied quite tightly to iTunes. So who is the Surface RT for? In my mind, if you’re looking for a solid, compact device that provides basic business functionality (read: email) or if you have someone that needs a very simple to use computer for email, web browsing, etc., then Surface RT is a great option. For me, I’m waiting on the Samsung Ativ Smart PC Pro and am curious to see what changes the Surface Pro will come with.

Read the article

How to Sync Any Browser’s Bookmarks With Your iPad or iPhone

- by Chris Hoffman

Apple makes it easy to synchronize bookmarks between the Safari browser on a Mac and the Safari browser on iOS, but you don’t have to use Safari — or a Mac — to sync your bookmarks back and forth. You can do this with any browser. Whether you’re using Chrome, Firefox, or even Internet Explorer, there’s a way to sync your browser bookmarks so you can access your same bookmarks on your iPad. Safari on a Mac Apple’s iCloud service is the officially supported way to sync data with your iPad or iPhone. It’s included on Macs, but Apple also offers similar iCloud bookmark syncing features for Windows. On a Mac, this should be enabled by default. To check whether it’s enabled, you can launch the System Preferences panel on your Mac, open the iCloud preferences panel, and ensure the Safari option is checked. If you’re using Safari on Windows — well, you shouldn’t be. Apple is no longer updating Safari for Windows. iCloud allows you to synchronize bookmarks between other browsers on your Windows system and Safari on your iOS device, so Safari isn’t necessary. Internet Explorer, Firefox, or Chrome via iCloud To get started, download Apple’s iCloud Control Panel application for Windows and install it. Launch the iCloud Control Panel and log in with the same iCloud account (Apple ID) you use on your iPad or iPhone. You’ll be able to enable Bookmark syncing with Internet Explorer, Firefox, or Chrome. Click the Options button to select the browser you want to synchronize bookmarks with. (Note that bookmarks are called “favorites” in Internet Explorer.) You’ll be able to access your synced bookmarks in the Safari browser on your iPad or iPhone, and they’ll sync back and forth automatically over the Internet. Google Chrome Sync Google Chrome also has its own built-in sync feature and Google provides an official Chrome app for iPad and iPhone. If you’re a Chrome user, you can set up Chrome Sync on your desktop version of Chrome — you should already have this enabled if you have logged into your Chrome browser. You can check if this Chrome Sync is enabled by opening Chrome’s settings screen and seeing whether you’re signed in. Click the Advanced sync settings button and ensure bookmark syncing is enabled. Once you have Chrome Sync set up, you can install the Chrome app from the App Store and sign in with the same Google account. Your bookmarks, as well as other data like your open browser tabs, will automatically sync. This can be a better solution because the Chrome browser is available for so many platforms and you gain the ability to synchronize other browser data, such as your open browser tabs, between your devices. Unfortunately, the Chrome browser is slower than Apple’s own Safari browser on iPad and iPhone because of the way Apple limits third-party browsers, so using it involves a trade-off. Manual Bookmark Sync in iTunes iTunes also allows you to sync bookmarks between your computer and your iPad or iPhone. It does this the old-fashioned way, by initiating a manual sync when your device is plugged in via USB. To access this option, connect your device to your computer, select the device in iTunes, and click the Info tab. This is the more outdated way of synchronizing your bookmarks. This feature may be useful if you want to create a one-time copy of your bookmarks from your PC, but it’s nowhere near ideal for regular syncing. You don’t have to use this feature, just as you really don’t have to use iTunes anymore. In fact, this option is unavailable if you’ve set up iCloud syncing in iTunes. After you set up bookmark syncing via iCloud or Chrome Sync, bookmarks will sync immediately after you save, remove, or edit them.

Read the article

Using the Onboard VGA output with a PCIe video card. Both nVidia

- by sebikul

I have 2 video cards, one On board, a nVidia 6150SE nForce 430 and a PCIe nVidia GeForce GT 220 1GB DDR2 RAM I have already configured the PCIe card to use the dual monitor feature, using the VGA and HDMI ports, but now I want to add a third monitor, using the On board VGA port I have managed to enable the On board graphics processor, which is taking 400MB of ram, but I cant manage to use it, nvidia-settings does not detect it, like it's not usable (but is there) My questions are the following: How can I manage to get the On board VGA display to work together with the PCIe graphics card? If possible, how can I recover those 400 MB the on board card is taking (even without being used) or how can I get it to use the PCIe card available memory? System Details: Linux 2.6.35-28-generic i686 Ubuntu 10.10 (All updates installed) NVIDIA Driver Version: 260.19.06 (Official) If more info is needed please let me know. Here is the lspci output when the On board card is disabled: 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:01.3 Co-processor: nVidia Corporation MCP61 SMU (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 02:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) And this is when both are enabled: 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:01.3 Co-processor: nVidia Corporation MCP61 SMU (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 02:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) Output of lshw -class display: *-display description: VGA compatible controller product: GT216 [GeForce GT 220] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:02:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:df000000-dfffffff memory:c0000000-cfffffff memory:da000000-dbffffff ioport:ef80(size=128) memory:def80000-deffffff *-display description: VGA compatible controller product: C61 [GeForce 6150SE nForce 430] vendor: nVidia Corporation physical id: d bus info: pci@0000:00:0d.0 version: a2 width: 64 bits clock: 66MHz capabilities: pm msi vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:22 memory:dd000000-ddffffff memory:b0000000-bfffffff memory:dc000000-dcffffff memory:deb40000-deb5ffff If what I'm looking for is not possible, please tell me, so I can disable the On board card and recover those 400MB of wasted RAM Thanks for your help!

Read the article

SQL SERVER – Fix: Error : 402 The data types ntext and varchar are incompatible in the equal to operator

- by pinaldave

Some errors are very simple to understand but the solution of the same is not easy to figure out. Here is one of the similar errors where it clearly suggests where the problem is but does not tell what is the solution. Additionally, there are multiple solutions so developers often get confused with which one is correct and which one is not correct. Let us first recreate scenario and understand where the problem is. Let us run following USE Tempdb GO CREATE TABLE TestTable (ID INT, MyText NTEXT) GO SELECT ID, MyText FROM TestTable WHERE MyText = 'AnyText' GO DROP TABLE TestTable GO When you run above script it will give you following error. Msg 402, Level 16, State 1, Line 1 The data types ntext and varchar are incompatible in the equal to operator. One of the questions I often receive is that voucher is for sure compatible to equal to operator, then why does this error show up. Well, the answer is much simpler I think we have not understood the error message properly. Please see the image below. The next and varchar are not compatible when compared with each other using equal sign. Now let us change the data type on the right side of the string to nvarchar from varchar. To do that we will put N’ before the string. USE Tempdb GO CREATE TABLE TestTable (ID INT, MyText NTEXT) GO SELECT ID, MyText FROM TestTable WHERE MyText = N'AnyText' GO DROP TABLE TestTable GO When you run above script it will give following error. Msg 402, Level 16, State 1, Line 1 The data types ntext and nvarchar are incompatible in the equal to operator. You can see that error message also suggests that now we are comparing next to nvarchar. Now as we have understood the error properly, let us see various solutions to the above problem. Solution 1: Convert the data types to match with each other using CONVERT function. Change the datatype of the MyText to nvarchar. SELECT ID, MyText FROM TestTable WHERE CONVERT(NVARCHAR(MAX), MyText) = N'AnyText' GO Solution 2: Convert the data type of columns from NTEXT to NVARCHAR(MAX) (TEXT to VARCHAR(MAX) ALTER TABLE TestTable ALTER COLUMN MyText NVARCHAR(MAX) GO Now you can run the original query again and it will work fine. Solution 3: Using LIKE command instead of Equal to command. SELECT ID, MyText FROM TestTable WHERE MyText LIKE 'AnyText' GO Well, any of the three of the solutions will work. Here is my suggestion if you can change the column data type from ntext or text to nvarchar or varchar, you should follow that path as text and ntext datatypes are marked as deprecated. All developers any way to change the deprecated data types in future, it will be a good idea to change them right early. If due to any reason you can not convert the original column use Solution 1 for temporary fix. Solution 3 is the not the best solution and use it as a last option. Did I miss any other method? If yes, please let me know and I will add the solution to original blog post with due credit. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Error Messages, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Install Oracle Configuration Manager's Standalone Collector

- by Get Proactive Customer Adoption Team

Untitled Document The Why and the How If you have heard of Oracle Configuration Manager (OCM), but haven’t installed it, I’m guessing this is for one of two reasons. Either you don’t know how it helps you or you don’t know how to install it. I’ll address both of those reasons today. First, let’s take a quick look at how My Oracle Support and the Oracle Configuration Manager work together to gain a good understanding of what their differences and roles are before we tackle the install. Oracle Configuration Manger is the tool that actually performs the data collection task. You deploy this lightweight piece of software into your system to collect configuration information about the system and OCM uploads that data to Oracle’s customer configuration repository. Oracle Support Engineers then have the configuration data available when you file a service request. You can also view the data through My Oracle Support. The real value is that the data Oracle Configuration Manager collects can help you avoid problems and get your Service Requests solved more quickly. When you view the information in My Oracle Support’s user interface to OCM, it may help you avoid situations that create problems. The proactive tools included in Oracle Configuration Manager help you avoid issues before they occur. You also save time because you didn’t need to open a service request. For example, you can use this capability when you need to compare your system configuration at two points in time, or monitor the system health. If you make the configuration data available to Oracle Support Engineers, when you need to open a Service Request the data helps them diagnose and resolve your critical system issues more quickly, which means you get answers more quickly too. Quick Installation Process Overview Before we dive into the step-by-step details, let me provide a quick overview. For some of you, this will be all you need. Log in to My Oracle Support and download the data collector from Collector tab. If you don’t see the Collector tab, click the More tab gain access. On the Collector tab, you will find a drop-down list showing which platforms are available. You can also see more ways to the Collector can help you if you click through the carousel of benefits. After you download the software for your platform, use FTP to move that file (.zip) from your PC to the server that hosts the Oracle software. Once you have that file on the server, locate the $ORACLE_HOME directory, and unzip the file within that directory. You can then use the command line tool to start the installation process. The installation process requires the My Oracle Support credential (Support Identifier, username, and password) Proxy specification (Host IP Address, Port number, username and password) Installation Step-by-Step Download the collector zip file from My Oracle Support and place it into your $Oracle_Home Unzip the zip file you downloaded from My Oracle Support – this will create a directory named CCR with several subdirectories Using the command line go to “$ORACLE_HOME/CCR/bin” and run the following command “setupCCR” Provide your My Oracle Support credential: login, password, and Support Identifier The installer will start deploying the collector application You have installed the Collector Post Installation Now that you have installed successfully, the scheduler is ready to collect configuration information for the software available in your Oracle Home. By default, the first collection will take place the day after the installation. If you want to run an instrumentation script to start the configuration collection of your Oracle Database server, E-Business Suite, or Enterprise Manager, you will find more details on that in the Installation and Administration Guide for My Oracle Support Configuration Manager. Related documents available on My Oracle Support Oracle Configuration Manager Installation and Administration Guide [ID 728989.5] Oracle Configuration Manager Prerequisites [ID 728473.5] Oracle Configuration Manager Network Connectivity Test [ID 728970.5] Oracle Configuration Manager Collection Overview [ID 728985.5] Oracle Configuration Manager Security Overview [ID 728982.5] Oracle Software Configuration Manager: Disconnected Mode Collection [ID 453412.1]

Read the article

Browser History ASP.Net AJAX: Microsoft.Web.Preview

- by Narendra Tiwari

I remember in 2006 we were working on a portal for our client Venetian, Las Vegas and the portal is full of AJAX features. One of my friend facing a challange to retain browser history with all AJAX operation. In terms of user experience it is an important aspect which could not be avoided in that scenario. Well that time we have made some workarounds to achieve the same but that may not be the perfect solution. Ok.. Now with Microsoft AJAX there are a lot of such features can be achieved with optimum efficiency. Microsoft AJAX has grown its features over the past few years. Microsoft.Web.Preview.dll is an addon in conjunction with ASP.Net AJAX. It contains a control named "History" for that purpose. Source code:- http://download.microsoft.com/download/8/3/1/831ffcd7-c571-4075-b8fa-6ff678794f60/CS-ASP-ASPBrowserHistoryinAJAX_cs.zip Below is a small sample to demonstrate the control. 1/ Get dll from the above source code bin, and add reference to your web application. 2/ Rightclick on toolbox panel and Choose Item, browse assembly. now you will be able to see History control. 3/ Add below section group in web.config under <configSections> <sectionGroup name="microsoft.web.preview" type="Microsoft.Web.Preview.Configuration.PreviewSectionGroup, Microsoft.Web.Preview"> <section name="search" type="Microsoft.Web.Preview.Configuration.SearchSection, Microsoft.Web.Preview" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="searchSiteMap" type="Microsoft.Web.Preview.Configuration.SearchSiteMapSection, Microsoft.Web.Preview" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="diagnostics" type="Microsoft.Web.Preview.Configuration.DiagnosticsSection, Microsoft.Web.Preview" requirePermission="false" allowDefinition="MachineToApplication"/> </sectionGroup> 4/ Now create a simple webpage a textbox (txt1), button (btn1) in an updatePanel with History control (History1). We will fill in text box and post the fom by clicking button a few times then verify if the browse history is retained. Remember button and textbox must be inside UpdatePanel and History control outside the UpdatePanel. <%@Page Language="C#" AutoEventWireup="true" CodeFile="History.aspx.cs" Inherits="History" %> <%@ Register Assembly="Microsoft.Web.Preview" Namespace="Microsoft.Web.Preview.UI.Controls" TagPrefix="cc1" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title>Untitled Page</title> </head> <body> <form id="form1" runat="server"> <asp:ScriptManager ID="ScriptManager1" runat="server" EnablePartialRendering="true"></asp:ScriptManager> <div> <cc1:History ID="History1" runat="server" OnNavigate="History1_Navigate"> </cc1:History> <asp:UpdatePanel ID="up1" runat="server"> <ContentTemplate> <asp:TextBox ID="txt1" runat="server"></asp:TextBox><br /> <asp:Button ID="btn1" runat="server" Text="Test" OnClick="btn1_Click" /> </ContentTemplate> <Triggers> <asp:AsyncPostBackTrigger ControlID="History1" /> </Triggers> </asp:UpdatePanel> </div> </form> </body> </html> 5/ Below code to add the textbox value in history everytime we post back using btn1 click. protected void btn1_Click(object sender, EventArgs e) { History1.AddHistoryPoint("txtState",txt1.Text); } 6/ and finally Navigate event of History control protected void History1_Navigate(object sender, Microsoft.Web.Preview.UI.Controls.HistoryEventArgs args) { string strState = string.Empty; if (args.State.ContainsKey("txtState")) { strState = (string)args.State["txtState"]; } txt1.Text = strState; } Now all set to go :) Reference: http://www.dotnetglobe.com/2008/08/using-asp.html

Read the article

Bluetooth not found on BCM43228

- by TK Kocheran

I've got a Broadcom BCM43228 mPCIe card which came with my motherboard (ASUS ROG Maximus V Extreme, can't seem to find a link to what the card is) which is working great for WiFi right now, but I can't detect the Bluetooth hardware onboard. In Windows, I have full Bluetooth 4.0 support. $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.4 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) 00:1c.6 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 7 (rev c4) 00:1c.7 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 8 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1189 (rev a1) 01:00.1 Audio device: NVIDIA Corporation Device 0e0a (rev a1) 0d:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 0e:00.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:01.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:04.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:05.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:06.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:07.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:08.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:09.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 10:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 12:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) 15:00.0 Network controller: Broadcom Corporation BCM43228 802.11a/b/g/n 17:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) The key line seems to be: 15:00.0 Network controller: Broadcom Corporation BCM43228 802.11a/b/g/n If I try to detect the Bluetooth card, I don't see anything: $ hcitool dev Devices: rfkill list all: Output lspci: Output lsusb: Output I finally found the card with usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=17b5 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=############ C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) I've heard that this card needs to have firmware injected into it in order to function. If that's the case, how do I do it?

Read the article

ODI 11g – Oracle Multi Table Insert

- by David Allan

With the IKM Oracle Multi Table Insert you can generate Oracle specific DML for inserting into multiple target tables from a single query result – without reprocessing the query or staging its result. When designing this to exploit the IKM you must split the problem into the reusable parts – the select part goes in one interface (I named SELECT_PART), then each target goes in a separate interface (INSERT_SPECIAL and INSERT_REGULAR). So for my statement below… /*INSERT_SPECIAL interface */ insert all when 1=1 And (INCOME_LEVEL > 250000) then into SCOTT.CUSTOMERS_NEW (ID, NAME, GENDER, BIRTH_DATE, MARITAL_STATUS, INCOME_LEVEL, CREDIT_LIMIT, EMAIL, USER_CREATED, DATE_CREATED, USER_MODIFIED, DATE_MODIFIED) values (ID, NAME, GENDER, BIRTH_DATE, MARITAL_STATUS, INCOME_LEVEL, CREDIT_LIMIT, EMAIL, USER_CREATED, DATE_CREATED, USER_MODIFIED, DATE_MODIFIED) /* INSERT_REGULAR interface */ when 1=1 then into SCOTT.CUSTOMERS_SPECIAL (ID, NAME, GENDER, BIRTH_DATE, MARITAL_STATUS, INCOME_LEVEL, CREDIT_LIMIT, EMAIL, USER_CREATED, DATE_CREATED, USER_MODIFIED, DATE_MODIFIED) values (ID, NAME, GENDER, BIRTH_DATE, MARITAL_STATUS, INCOME_LEVEL, CREDIT_LIMIT, EMAIL, USER_CREATED, DATE_CREATED, USER_MODIFIED, DATE_MODIFIED) /*SELECT*PART interface */ select CUSTOMERS.EMAIL EMAIL, CUSTOMERS.CREDIT_LIMIT CREDIT_LIMIT, UPPER(CUSTOMERS.NAME) NAME, CUSTOMERS.USER_MODIFIED USER_MODIFIED, CUSTOMERS.DATE_MODIFIED DATE_MODIFIED, CUSTOMERS.BIRTH_DATE BIRTH_DATE, CUSTOMERS.MARITAL_STATUS MARITAL_STATUS, CUSTOMERS.ID ID, CUSTOMERS.USER_CREATED USER_CREATED, CUSTOMERS.GENDER GENDER, CUSTOMERS.DATE_CREATED DATE_CREATED, CUSTOMERS.INCOME_LEVEL INCOME_LEVEL from SCOTT.CUSTOMERS CUSTOMERS where (1=1) Firstly I create a SELECT_PART temporary interface for the query to be reused and in the IKM assignment I state that it is defining the query, it is not a target and it should not be executed. Then in my INSERT_SPECIAL interface loading a target with a filter, I set define query to false, then set true for the target table and execute to false. This interface uses the SELECT_PART query definition interface as a source. Finally in my final interface loading another target I set define query to false again, set target table to true and execute to true – this is the go run it indicator! To coordinate the statement construction you will need to create a package with the select and insert statements. With 11g you can now execute the package in simulation mode and preview the generated code including the SQL statements. Hopefully this helps shed some light on how you can leverage the Oracle MTI statement. A similar IKM exists for Teradata. The ODI IKM Teradata Multi Statement supports this multi statement request in 11g, here is an extract from the paper at www.teradata.com/white-papers/born-to-be-parallel-eb3053/ Teradata Database offers an SQL extension called a Multi-Statement Request that allows several distinct SQL statements to be bundled together and sent to the optimizer as if they were one. Teradata Database will attempt to execute these SQL statements in parallel. When this feature is used, any sub-expressions that the different SQL statements have in common will be executed once, and the results shared among them. It works in the same way as the ODI MTI IKM, multiple interfaces orchestrated in a package, each interface contributes some SQL, the last interface in the chain executes the multi statement.

Read the article

Next Generation Mobile Clients for Oracle Applications & the role of Oracle Fusion Middleware

- by Manish Palaparthy

Oracle Enterprise Applications have been available with modern web browser based interfaces for a while now. The web browsers available in smart phones no longer require special markup language such as WML since the processing power of these handsets is quite near to that of a typical personal computer. Modern Mobile devices such as the IPhone, Android Phones, BlackBerry, Windows 8 devices can now render XHTML & HTML quite well. This means you could potentially use your mobile browser to access your favorite enterprise application. While the Mobile browser would render the UI, you might find it difficult to use it due to the formatting & Presentation of the Native UI. Smart phones offer a lot more than just a powerful web browser, they offer capabilities such as Maps, GPS, Multi touch, pinch zoom, accelerometers, vivid colors, camera with video, support for 3G, 4G networks, cloud storage, NFC, streaming media, tethering, voice based features, multi tasking, messaging, social networking web browsers with support for HTML 5 and many more features. While the full potential of Enterprise Mobile Apps is yet to be realized, Oracle has published a few of its applications that take advantage of the above capabilities and are available for the IPhone natively. Here are some of them Iphone Apps Oracle Business Approvals for Managers: Offers a highly intuitive user interface built as a native mobile application to conveniently access pending actions related to expenses, purchase requisitions, HR vacancies and job offers. You can even view BI reports related to the worklist actions. Works with Oracle E-Business Suite Oracle Business Indicators : Real-time secure access to OBI reports. Oracle Business Approvals for Sales Managers: Enables sales executives to review key targeted tasks, access relevant business intelligence reports. Works with Siebel CRM, Siebel Quote & Order Capture. Oracle Mobile Sales Assistant: CRM application that provides real-time, secure access to the information your sales organization needs, complete frequent tasks, collaborate with colleagues and customers. Works with Oracle CRMOracle Mobile Sales Forecast: Designed specifically for the mobile business user to view key opportunities. Works with Oracle CRM on demand Oracle iReceipts : Part of Oracle PeopleSoft Expenses, which allows users to create and submit expense lines for cash transactions in real-time. Works with Oracle PeopleSoft expenses Now, we have seen some mobile Apps that Oracle has published, I am sure you are intrigued as to how develop your own clients for the use-cases that you deem most fit. For that Oracle has ADF Mobile ADF Mobile You could develop Mobile Applications with the SDK available with the smart phone platforms!, but you'd really have to be a mobile ninja developer to develop apps with the rich user experience like the ones above. The challenges really multiply when you have to support multiple mobile devices. ADF Mobile framework is really handy to meet this challenge ADF Mobile can in be used to Develop Apps for the Mobile browser : An application built with ADF Mobile framework installs on a smart device, renders user interface via HTML5, and has access to device services. This means the programming model is primarily web-based, which offers consistency with other enterprise applications as well as easier migration to new platforms. Develop Apps for the Mobile Client (Native Apps): These applications have access to device services, enabling a richer experience for users than a browser alone can offer. ADF mobile enables rapid and declarative development of rich, on-device mobile applications. Developers only need to write an application once and then they can deploy the same application across multiple leading smart phone platforms. Oracle SOA Suite Although the Mobile users are using the smart phone apps, and actual transactions are being executed in the underlying app, there is lot of technical wizardry that is going under the surface. All of this key technical components to make 1. WebService calls 2. Authentication 3. Intercepting Webservice calls and adding security credentials to the request 4. Invoking the services of the enterprise application 5. Integrating with the Enterprise Application via the Adapter is all being implemented at the SOA infrastructure layer. As you can see from the above diagram. The key pre-requisites to mobile enable an Enterprise application are The core enterprise application Oracle SOA Suite ADF Mobile

Read the article

SPARC T5-4 LDoms for RAC and WebLogic Clusters

- by Jeff Taylor-Oracle

I wanted to use two Oracle SPARC T5-4 servers to simultaneously host both Oracle RAC and a WebLogic Server Cluster. I chose to use Oracle VM Server for SPARC to create a cluster like this: There are plenty of trade offs and decisions that need to be made, for example: Rather than configuring the system by hand, you might want to use an Oracle SuperCluster T5-8 My configuration is similar to jsavit's: Availability Best Practices - Example configuring a T5-8 but I chose to ignore some of the advice. Maybe I should have included an alternate service domain, but I decided that I already had enough redundancy Both Oracle SPARC T5-4 servers were to be configured like this: Cntl 0.25 4 64GB App LDom 2.75 CPU's 44 cores 704 GB DB LDom One CPU 16 cores 256 GB The systems started with everything in the primary domain: # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL NORM UPTIME primary active -n-c-- UART 512 1023G 0.0% 0.0% 11m # ldm list-spconfig factory-default [current] primary # ldm list -o core,memory,physio NAME primary CORE CID CPUSET 0 (0, 1, 2, 3, 4, 5, 6, 7) 1 (8, 9, 10, 11, 12, 13, 14, 15) 2 (16, 17, 18, 19, 20, 21, 22, 23) -- SNIP 62 (496, 497, 498, 499, 500, 501, 502, 503) 63 (504, 505, 506, 507, 508, 509, 510, 511) MEMORY RA PA SIZE 0x30000000 0x30000000 255G 0x80000000000 0x80000000000 256G 0x100000000000 0x100000000000 256G 0x180000000000 0x180000000000 256G # Give this memory block to the DB LDom IO DEVICE PSEUDONYM OPTIONS pci@300 pci_0 pci@340 pci_1 pci@380 pci_2 pci@3c0 pci_3 pci@400 pci_4 pci@440 pci_5 pci@480 pci_6 pci@4c0 pci_7 pci@300/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE1 pci@300/pci@1/pci@0/pci@c /SYS/RCSA/PCIE2 pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0 pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0 pci@340/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE3 pci@340/pci@1/pci@0/pci@c /SYS/RCSA/PCIE4 pci@380/pci@1/pci@0/pci@a /SYS/RCSA/PCIE9 pci@380/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE10 pci@3c0/pci@1/pci@0/pci@e /SYS/RCSA/PCIE11 pci@3c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE12 pci@400/pci@1/pci@0/pci@e /SYS/RCSA/PCIE5 pci@400/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE6 pci@440/pci@1/pci@0/pci@e /SYS/RCSA/PCIE7 pci@440/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE8 pci@480/pci@1/pci@0/pci@a /SYS/RCSA/PCIE13 pci@480/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE14 pci@4c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE15 pci@4c0/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE16 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2 Added an additional service processor configuration: # ldm add-spconfig split # ldm list-spconfig factory-default primary split [current] And removed many of the resources from the primary domain: # ldm start-reconf primary # ldm set-core 4 primary # ldm set-memory 32G primary # ldm rm-io pci@340 primary # ldm rm-io pci@380 primary # ldm rm-io pci@3c0 primary # ldm rm-io pci@400 primary # ldm rm-io pci@440 primary # ldm rm-io pci@480 primary # ldm rm-io pci@4c0 primary # init 6 Needed to add resources to the guest domains: # ldm add-domain db # ldm set-core cid=`seq -s"," 48 63` db # ldm add-memory mblock=0x180000000000:256G db # ldm add-io pci@480 db # ldm add-io pci@4c0 db # ldm add-domain app # ldm set-core 44 app # ldm set-memory 704G app # ldm add-io pci@340 app # ldm add-io pci@380 app # ldm add-io pci@3c0 app # ldm add-io pci@400 app # ldm add-io pci@440 app Needed to set up services: # ldm add-vds primary-vds0 primary # ldm add-vcc port-range=5000-5100 primary-vcc0 primary Needed to add a virtual network port for the WebLogic application domain: # ipadm NAME CLASS/TYPE STATE UNDER ADDR lo0 loopback ok -- -- lo0/v4 static ok -- ... lo0/v6 static ok -- ... net0 ip ok -- ... net0/v4 static ok -- xxx.xxx.xxx.xxx/24 net0/v6 addrconf ok -- .... net0/v6 addrconf ok -- ... net8 ip ok -- -- net8/v4 static ok -- ... # dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE net1 Ethernet unknown 0 unknown ixgbe1 net0 Ethernet up 1000 full ixgbe0 net8 Ethernet up 10 full usbecm2 # ldm add-vsw net-dev=net0 primary-vsw0 primary # ldm add-vnet vnet1 primary-vsw0 app Needed to add a virtual disk to the WebLogic application domain: # format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0t5000CCA02505F874d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02505f874 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD0/disk 1. c0t5000CCA02506C468d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02506c468 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD1/disk 2. c0t5000CCA025067E5Cd0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca025067e5c /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD2/disk 3. c0t5000CCA02506C258d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02506c258 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD3/disk Specify disk (enter its number): ^C # ldm add-vdsdev /dev/dsk/c0t5000CCA02506C468d0s2 HDD1@primary-vds0 # ldm add-vdisk HDD1 HDD1@primary-vds0 app Add some additional spice to the pot: # ldm set-variable auto-boot\\?=false db # ldm set-variable auto-boot\\?=false app # ldm set-var boot-device=HDD1 app Bind the logical domains: # ldm bind db # ldm bind app At the end of the process, the system is set up like this: # ldm list -o core,memory,physio NAME primary CORE CID CPUSET 0 (0, 1, 2, 3, 4, 5, 6, 7) 1 (8, 9, 10, 11, 12, 13, 14, 15) 2 (16, 17, 18, 19, 20, 21, 22, 23) 3 (24, 25, 26, 27, 28, 29, 30, 31) MEMORY RA PA SIZE 0x30000000 0x30000000 32G IO DEVICE PSEUDONYM OPTIONS pci@300 pci_0 pci@300/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE1 pci@300/pci@1/pci@0/pci@c /SYS/RCSA/PCIE2 pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0 pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0 ------------------------------------------------------------------------------ NAME app CORE CID CPUSET 4 (32, 33, 34, 35, 36, 37, 38, 39) 5 (40, 41, 42, 43, 44, 45, 46, 47) 6 (48, 49, 50, 51, 52, 53, 54, 55) 7 (56, 57, 58, 59, 60, 61, 62, 63) 8 (64, 65, 66, 67, 68, 69, 70, 71) 9 (72, 73, 74, 75, 76, 77, 78, 79) 10 (80, 81, 82, 83, 84, 85, 86, 87) 11 (88, 89, 90, 91, 92, 93, 94, 95) 12 (96, 97, 98, 99, 100, 101, 102, 103) 13 (104, 105, 106, 107, 108, 109, 110, 111) 14 (112, 113, 114, 115, 116, 117, 118, 119) 15 (120, 121, 122, 123, 124, 125, 126, 127) 16 (128, 129, 130, 131, 132, 133, 134, 135) 17 (136, 137, 138, 139, 140, 141, 142, 143) 18 (144, 145, 146, 147, 148, 149, 150, 151) 19 (152, 153, 154, 155, 156, 157, 158, 159) 20 (160, 161, 162, 163, 164, 165, 166, 167) 21 (168, 169, 170, 171, 172, 173, 174, 175) 22 (176, 177, 178, 179, 180, 181, 182, 183) 23 (184, 185, 186, 187, 188, 189, 190, 191) 24 (192, 193, 194, 195, 196, 197, 198, 199) 25 (200, 201, 202, 203, 204, 205, 206, 207) 26 (208, 209, 210, 211, 212, 213, 214, 215) 27 (216, 217, 218, 219, 220, 221, 222, 223) 28 (224, 225, 226, 227, 228, 229, 230, 231) 29 (232, 233, 234, 235, 236, 237, 238, 239) 30 (240, 241, 242, 243, 244, 245, 246, 247) 31 (248, 249, 250, 251, 252, 253, 254, 255) 32 (256, 257, 258, 259, 260, 261, 262, 263) 33 (264, 265, 266, 267, 268, 269, 270, 271) 34 (272, 273, 274, 275, 276, 277, 278, 279) 35 (280, 281, 282, 283, 284, 285, 286, 287) 36 (288, 289, 290, 291, 292, 293, 294, 295) 37 (296, 297, 298, 299, 300, 301, 302, 303) 38 (304, 305, 306, 307, 308, 309, 310, 311) 39 (312, 313, 314, 315, 316, 317, 318, 319) 40 (320, 321, 322, 323, 324, 325, 326, 327) 41 (328, 329, 330, 331, 332, 333, 334, 335) 42 (336, 337, 338, 339, 340, 341, 342, 343) 43 (344, 345, 346, 347, 348, 349, 350, 351) 44 (352, 353, 354, 355, 356, 357, 358, 359) 45 (360, 361, 362, 363, 364, 365, 366, 367) 46 (368, 369, 370, 371, 372, 373, 374, 375) 47 (376, 377, 378, 379, 380, 381, 382, 383) MEMORY RA PA SIZE 0x30000000 0x830000000 192G 0x4000000000 0x80000000000 256G 0x8080000000 0x100000000000 256G IO DEVICE PSEUDONYM OPTIONS pci@340 pci_1 pci@380 pci_2 pci@3c0 pci_3 pci@400 pci_4 pci@440 pci_5 pci@340/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE3 pci@340/pci@1/pci@0/pci@c /SYS/RCSA/PCIE4 pci@380/pci@1/pci@0/pci@a /SYS/RCSA/PCIE9 pci@380/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE10 pci@3c0/pci@1/pci@0/pci@e /SYS/RCSA/PCIE11 pci@3c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE12 pci@400/pci@1/pci@0/pci@e /SYS/RCSA/PCIE5 pci@400/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE6 pci@440/pci@1/pci@0/pci@e /SYS/RCSA/PCIE7 pci@440/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE8 ------------------------------------------------------------------------------ NAME db CORE CID CPUSET 48 (384, 385, 386, 387, 388, 389, 390, 391) 49 (392, 393, 394, 395, 396, 397, 398, 399) 50 (400, 401, 402, 403, 404, 405, 406, 407) 51 (408, 409, 410, 411, 412, 413, 414, 415) 52 (416, 417, 418, 419, 420, 421, 422, 423) 53 (424, 425, 426, 427, 428, 429, 430, 431) 54 (432, 433, 434, 435, 436, 437, 438, 439) 55 (440, 441, 442, 443, 444, 445, 446, 447) 56 (448, 449, 450, 451, 452, 453, 454, 455) 57 (456, 457, 458, 459, 460, 461, 462, 463) 58 (464, 465, 466, 467, 468, 469, 470, 471) 59 (472, 473, 474, 475, 476, 477, 478, 479) 60 (480, 481, 482, 483, 484, 485, 486, 487) 61 (488, 489, 490, 491, 492, 493, 494, 495) 62 (496, 497, 498, 499, 500, 501, 502, 503) 63 (504, 505, 506, 507, 508, 509, 510, 511) MEMORY RA PA SIZE 0x80000000 0x180000000000 256G IO DEVICE PSEUDONYM OPTIONS pci@480 pci_6 pci@4c0 pci_7 pci@480/pci@1/pci@0/pci@a /SYS/RCSA/PCIE13 pci@480/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE14 pci@4c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE15 pci@4c0/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE16 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2 Start the domains: # ldm start app LDom app started # ldm start db LDom db started Make sure to start the vntsd service that was created, above. # svcs -a | grep ldo disabled 8:38:38 svc:/ldoms/vntsd:default online 8:38:58 svc:/ldoms/agents:default online 8:39:25 svc:/ldoms/ldmd:default # svcadm enable vntsd Now use the MAC address to configure the Solaris 11 Automated Installation. Database Logical Domain # telnet localhost 5000 {0} ok devalias screen /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@7/display@0 disk7 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p3 disk6 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p2 disk5 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p1 disk4 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p0 scsi1 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0 net3 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0,1 net2 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 virtual-console /virtual-devices/console@1 name aliases {0} ok boot net2 Boot device: /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 File and args: 1000 Mbps full duplex Link up Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx WLS Logical Domain # telnet localhost 5001 {0} ok devalias hdd1 /virtual-devices@100/channel-devices@200/disk@0 vnet1 /virtual-devices@100/channel-devices@200/network@0 net /virtual-devices@100/channel-devices@200/network@0 disk /virtual-devices@100/channel-devices@200/disk@0 virtual-console /virtual-devices/console@1 name aliases {0} ok boot net Boot device: /virtual-devices@100/channel-devices@200/network@0 File and args: Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx Repeat the process for the second SPARC T5-4, install Solaris, RAC and WebLogic Cluster, and you are ready to go. Maybe buying a SuperCluster would have been easier.

Read the article

Hello, T4MVC – Goodbye, ASP.NET MVC “magic strings”

- by Brian Schroer

I’m working on my first ASP.NET MVC project, and I really, really like MVC. I hate all of the “magic strings”, though: <div id="logindisplay"> <% Html.RenderPartial("LogOnUserControl"); %> </div> <div id="menucontainer"> <ul id="menu"> <li><%=Html.ActionLink("Find Dinner", "Index", "Dinners")%></li> <li><%=Html.ActionLink("Host Dinner", "Create", "Dinners")%></li> <li><%=Html.ActionLink("About", "About", "Home")%></li> </ul> </div> They’re prone to misspelling (causing errors that won’t be caught until runtime), there’s duplication, there’s no Intellisense, and they’re not friendly to refactoring tools. I had started down the path of creating static classes with constants for the strings, e.g.: <li><%=Html.ActionLink("Find Dinner", DinnerControllerActions.Index, Controllers.Dinner)%></li> …but that was pretty tedious. Then I discovered T4MVC (http://mvccontrib.codeplex.com/wikipage?title=T4MVC). Just add its T4MVC.tt and T4MVC.settings.t4 files to the root of your MVC application, and it magically (and this time, it’s good magic) generates code that allows you to replace the first code sample above with this: <div id="logindisplay"> <% Html.RenderPartial(MVC.Shared.Views.LogOnUserControl); %> </div> <div id="menucontainer"> <ul id="menu"> <li><%=Html.ActionLink("Find Dinner", MVC.Dinners.Index())%></li> <li><%=Html.ActionLink("Host Dinner", MVC.Dinners.Create())%></li> <li><%=Html.ActionLink("About", MVC.Home.About())%></li> </ul> </div> It gives you a strongly-typed alternative to magic strings for all of these scenarios: Html.Action Html.ActionLink Html.RenderAction Html.RenderPartial Html.BeginForm Url.Action Ajax.ActionLink view names inside controllers But wait, there’s more! It even gives you static helpers for image and script links, e.g.: <img src="<%= Links.Content.nerd_jpg %>" /> <script src="<%= Links.Scripts.Map_js %>" type="text/javascript"></script> …instead of: <img src="/Content/nerd.jpg" /> <script src="/Scripts/Map.js" type="text/javascript"></script> Thanks to David Ebbo for creating this great tool. You can watch an eight and a half minute video about T4MVC on Channel 9 via this link: http://channel9.msdn.com/posts/jongalloway/Jon-Takes-Five-with-David-Ebbo-on-T4MVC/. You can download T4MVC from its CodePlex page: http://mvccontrib.codeplex.com/wikipage?title=T4MVC.

Read the article

how to assign javascript variable value to the google analytics script? [migrated]

- by Vinoth Prakash

I have assigned two values in the two hidden variables at server Side and accessed those values at client side using script. I have written the google analytics code. I have set two custom variable. I need to pass two values which is stored in the javascript variables to the "value" of custom variable. I have assigned the varibales but values not displaying. please telll what error i made in the script. My aspx code <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <div> <br /> Total Pirce   : <asp:Label ID="Label1" runat="server" Text="10"></asp:Label><br />  Ship Price    : <asp:Label ID="Label2" runat="server" Text="5"></asp:Label> <br /> ------------------<br /> Grand Total : <asp:Label ID="Label3" runat="server" Text="15"></asp:Label><br /> ------------------</div> <asp:HiddenField ID="HiddenField1" runat="server" /> <asp:HiddenField ID="HiddenField2" runat="server" /> </form> <script type="text/javascript"> var serverhid1 = document.getElementById('HiddenField1').value; var serverhid2 = document.getElementById('HiddenField2').value; alert(serverhid1) alert(serverhid2) var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-35156990-1']); //Set Custom Variable _gaq.push(['_setCustomVar', 1, 'TotalPirce', serverhid1 , 3]); _gaq.push(['_setCustomVar', 2, 'Shipping','yes', 3]); _gaq.push(['_setCustomVar', 3, 'GrandTotal',check(), 3]); _gaq.push(['_setDomainName', 'none']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); </script> </body> </html> cs Code protected void Page_Load(object sender, EventArgs e) { HiddenField1.Value = Label1.Text; HiddenField2.Value = Label2.Text; }

Read the article

How to display a hierarchical skill tree in php

- by user3587554

If I have skill data set up in a tree format (where earlier skills are prerequisites for later ones), how would I display it as a tree, using php? The parent would be on top and have 3 children. Each of these children can then have one more child so its parent would be directly above it. I'm having trouble figuring out how to add the root element in the middle of the top div, and the child of the children below each child of the root. I'm not looking for code, but an explanation of how to do it. My data in array form is this: Data: Array ( [1] => Array ( [id] => 1 [title] => Jutsu [description] => Skill that makes you awesomer at using ninjutsu [tiers] => 1 [prereq] => [image] => images/skills/jutsu.png [children] => Array ( [2] => Array ( [id] => 2 [title] => fireball [description] => Increase your damage with fire jutsu and weapons [tiers] => 5 [prereq] => 1 [image] => images/skills/fireball.png [children] => Array ( [5] => Array ( [id] => 5 [title] => pin point [description] => Increases jutsu accuracy [tiers] => 5 [prereq] => 2 [image] => images/skills/pinpoint.png ) ) ) [3] => Array ( [id] => 3 [title] => synergy [description] => Reduce the amount of chakra needed to use ninjutsu [tiers] => 1 [prereq] => 1 [image] => images/skills/synergy.png ) [4] => Array ( [id] => 4 [title] => ebb & flow [description] => Increase the damage of water jutsu, water weapons, and reduce the damage of jutsu and weapons that use water element [tiers] => 5 [prereq] => 1 [image] => images/skills/ebbandflow.png [children] => Array ( [6] => Array ( [id] => 6 [title] => IQ [description] => Decrease the time it takes to learn a jutsu [tiers] => 5 [prereq] => 4 [image] => images/skills/iq.png ) ) ) ) ) ) An example would be this demo image minus the hover stuff.

Read the article

disks not ready in array causes mdadm to force initramfs shell

- by RaidPinata

Okay, this is starting to get pretty frustrating. I've read most of the other answers on this site that have anything to do with this issue but I'm still not getting anywhere. I have a RAID 6 array with 10 devices and 1 spare. The OS is on a completely separate device. At boot only three of the 10 devices in the raid are available, the others become available later in the boot process. Currently, unless I go through initramfs I can't get the system to boot - it just hangs with a blank screen. When I do boot through recovery (initramfs), I get a message asking if I want to assemble the degraded array. If I say no and then exit initramfs the system boots fine and my array is mounted exactly where I intend it to. Here are the pertinent files as near as I can tell. Ask me if you want to see anything else. # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default (built-in), scan all partitions (/proc/partitions) and all # containers for MD superblocks. alternatively, specify devices to scan, using # wildcards if desired. #DEVICE partitions containers # auto-create devices with Debian standard permissions # CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays # This file was auto-generated on Tue, 13 Nov 2012 13:50:41 -0700 # by mkconf $Id$ ARRAY /dev/md0 level=raid6 num-devices=10 metadata=1.2 spares=1 name=Craggenmore:data UUID=37eea980:24df7b7a:f11a1226:afaf53ae Here is fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sdc2 during installation UUID=3fa1e73f-3d83-4afe-9415-6285d432c133 / ext4 errors=remount-ro 0 1 # swap was on /dev/sdc3 during installation UUID=c4988662-67f3-4069-a16e-db740e054727 none swap sw 0 0 # mount large raid device on /data /dev/md0 /data ext4 defaults,nofail,noatime,nobootwait 0 0 output of cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 sda[0] sdd[10](S) sdl[9] sdk[8] sdj[7] sdi[6] sdh[5] sdg[4] sdf[3] sde[2] sdb[1] 23441080320 blocks super 1.2 level 6, 512k chunk, algorithm 2 [10/10] [UUUUUUUUUU] unused devices: <none> Here is the output of mdadm --detail --scan --verbose ARRAY /dev/md0 level=raid6 num-devices=10 metadata=1.2 spares=1 name=Craggenmore:data UUID=37eea980:24df7b7a:f11a1226:afaf53ae devices=/dev/sda,/dev/sdb,/dev/sde,/dev/sdf,/dev/sdg,/dev/sdh,/dev/sdi,/dev/sdj,/dev/sdk,/dev/sdl,/dev/sdd Please let me know if there is anything else you think might be useful in troubleshooting this... I just can't seem to figure out how to change the boot process so that mdadm waits until the drives are ready to build the array. Everything works just fine if the drives are given enough time to come online. edit: changed title to properly reflect situation

Read the article

RPi and Java Embedded GPIO: Big Data and Java Technology

- by hinkmond

Java Embedded and Big Data go hand-in-hand, especially as demonstrated by prototyping on a Raspberry Pi to show how well the Java Embedded platform can perform on a small embedded device which then becomes the proof-of-concept for industrial controllers, medical equipment, networking gear or any type of sensor-connected device generating large amounts of data. The key is a fast and reliable way to access that data using Java technology. In the previous blog posts you've seen the integration of a static electricity sensor and the Raspberry Pi through the GPIO port, then accessing that data through Java Embedded code. It's important to point out how this works and why it works well with Java code. First, the version of Linux (Debian Wheezy/Raspian) that is found on the RPi has a very convenient way to access the GPIO ports through the use of Linux OS managed file handles. This is key in avoiding terrible and complex coding using register manipulation in C code, or having to program in a less elegant and clumsy procedural scripting language such as python. Instead, using Java Embedded, allows a fast way to access those GPIO ports through those same Linux file handles. Java already has a very easy to program way to access file handles with a high degree of performance that matches direct access of those file handles with the Linux OS. Using the Java API java.io.FileWriter lets us open the same file handles that the Linux OS has for accessing the GPIO ports. Then, by first resetting the ports using the unexport and export file handles, we can initialize them for easy use in a Java app. // Open file handles to GPIO port unexport and export controls FileWriter unexportFile = new FileWriter("/sys/class/gpio/unexport"); FileWriter exportFile = new FileWriter("/sys/class/gpio/export"); ... // Reset the port unexportFile.write(gpioChannel); unexportFile.flush(); // Set the port for use exportFile.write(gpioChannel); exportFile.flush(); Then, another set of file handles can be used by the Java app to control the direction of the GPIO port by writing either "in" or "out" to the direction file handle. // Open file handle to input/output direction control of port FileWriter directionFile = new FileWriter("/sys/class/gpio/gpio" + gpioChannel + "/direction"); // Set port for input directionFile.write("in"); // Or, use "out" for output directionFile.flush(); And, finally, a RandomAccessFile handle can be used with a high degree of performance on par with native C code (only milliseconds to read in data and write out data) with low overhead (unlike python) to manipulate the data going in and out on the GPIO port, while the object-oriented nature of Java programming allows for an easy way to construct complex analytic software around that data access functionality to the external world. RandomAccessFile[] raf = new RandomAccessFile[GpioChannels.length]; ... // Reset file seek pointer to read latest value of GPIO port raf[channum].seek(0); raf[channum].read(inBytes); inLine = new String(inBytes); It's Big Data from sensors and industrial/medical/networking equipment meeting complex analytical software on a small constraint device (like a Linux/ARM RPi) where Java Embedded allows you to shine as an Embedded Device Software Designer. Hinkmond

Read the article

trying to setup wireless

- by JohnMerlino

I'm trying to set up wireless on vostro 1520 dell laptop, with latest Ubuntu install. Here's the output of some of the commands that I was told to run: lshw -C network viggy@ubuntu:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 03 serial: 00:24:e8:da:84:25 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.2.6 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:47 ioport:3000(size=256) memory:f6004000-f6004fff memory:f6000000-f6003fff memory:f6020000-f603ffff *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0e:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:fa000000-fa003fff *-network DISABLED description: Wireless interface physical id: 1 logical name: wlan0 serial: 0c:60:76:05:ee:74 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-29-generic firmware=N/A multicast=yes wireless=IEEE 802.11bg lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 0e:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 1a:00.0 FireWire (IEEE 1394): O2 Micro, Inc. Device 10f7 (rev 01) 1a:00.1 SD Host controller: O2 Micro, Inc. Device 8120 (rev 01) 1a:00.2 Mass storage controller: O2 Micro, Inc. Device 8130 (rev 01) iwconfig lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. At this point in time, I don't have wireless.

Read the article

lvm disappeared after disc replacement on raid10

- by user142295

here my problem: I am running ubuntu 12.04 on a raid10 (4 disks), on top of which I installed an lvm with two volume groups (one for /, one for /home). The layout of the disks are as follows: Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003f3b6 Device Boot Start End Blocks Id System /dev/sda1 * 63 481949 240943+ 83 Linux /dev/sda2 481950 2910640634 1455079342+ fd Linux raid autodetect /dev/sda3 2910640635 2930272064 9815715 82 Linux swap / Solaris Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00069785 Device Boot Start End Blocks Id System /dev/sdb1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdb2 2910158685 2930272064 10056690 82 Linux swap / Solaris Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdc2 2910158685 2930272064 10056690 82 Linux swap / Solaris Disk /dev/sdd: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f14de Device Boot Start End Blocks Id System /dev/sdd1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdd2 2910158685 2930272064 10056690 82 Linux swap / Solaris The first disk (/dev/sda) contains the /boot partition on /dev/sda1. I use grub2 to boot the system off this partition. On top of this raid10 I installed two volume groups, one for /, one for /home. This system worked well, I even exchanged two disks during the last two years. It always worked. But not this time. For the first time, /dev/sda broke. I do not know if this is an issue – I know I would have struggled anyways to overcome the problem with /boot installed on that disk and grub2 installed on the mbr of /dev/sda. Anyways, I did what I always did: start knoppix fire up the raid sudo mdadm --examine -scan which returns ARRAY /dev/md127 UUID=0dbf4558:1a943464:132783e8:19cdff95 start it up sudo mdadm --assemble /dev/md127 fail the failing disk (smart event) sudo mdadm /dev/md127 --fail /dev/sda2 remove the failing disk sudo mdadm /dev/md127 --remove /dev/sda2 stop the raid sudo mdadm -S /dev/md127 take out the disk replace it with a new one create the same partitions as on the failling one add it to the raid sudo mdadm --assemble /dev/md127 sudo mdadm /dev/md127 --add /dev/sda2 wait 4 hours All looks fine: cat /proc/mdstat returns: Personalities : [raid10] md127 : active raid10 sda2[0] sdd1[3] sdc1[2] sdb1[1] 2910158464 blocks 64K chunks 2 near-copies [4/4] [UUUU] unused devices: <none> and sudo mdadm --detail /dev/md127 returns /dev/md127: Version : 0.90 Creation Time : Wed Jun 10 13:08:46 2009 Raid Level : raid10 Array Size : 2910158464 (2775.34 GiB 2980.00 GB) Used Dev Size : 1455079232 (1387.67 GiB 1490.00 GB) Raid Devices : 4 Total Devices : 4 Preferred Minor : 127 Persistence : Superblock is persistent Update Time : Thu Mar 21 16:27:40 2013 State : clean Active Devices : 4 Working Devices : 4 Failed Devices : 0 Spare Devices : 0 Layout : near=2 Chunk Size : 64K UUID : 0dbf4558:1a943464:132783e8:19cdff95 (local to host Microknoppix) Events : 0.4824680 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 17 1 active sync /dev/sdb1 2 8 33 2 active sync /dev/sdc1 3 8 49 3 active sync /dev/sdd1 However, there is no trace of the volume groups. Rebooting into knoppix does not help Restarting the old system (I actually replugged and re-added the failing disk for that – the system begins to start, but then fails to see the / partition – no wonder if the volume group is gone) does not help. sudo vgscan, sudo vgdisplay, sudo lvs, sudo lvdisplay, sudo vgscan –mknodes all returned No volume groups found. I am completely at a loss. Can anyone tell me if and how I can recover my data? Thanks in advance!

Read the article

Customizing the Test Status on the TFS 2010 SSRS Stories Overview Report

- by Bob Hardister

This post shows how to customize the SQL query used by the Team Foundation Server 2010 SQL Server Reporting Services (SSRS) Stories Overview Report. The objective is to show test status for the current version while including user story status of the current and prior versions. Why? Because we don’t copy completed user stories into the next release. We only want one instance of a user story for the product because we believe copies can get out of sync when they are supposed to be the same. In the example below, work items for the current version are on the area path root and prior versions are not on the area path root. However, you can use area path or iteration path criteria in the query as suits your needs. In any case, here’s how you do it: 1. Download a copy of the report RDL file as a backup 2. Open the report by clicking the edit down arrow and selecting “Edit in Report Builder” 3. Right click on the dsOverview Dataset and select Dataset Properties 4. Update the following SQL per the comments in the code: Customization 1 of 3 … -- Get the list deliverable workitems that have Test Cases linked DECLARE @TestCases Table (DeliverableID int, TestCaseID int); INSERT @TestCases SELECT h.ID, flh.TargetWorkItemID FROM @Hierarchy h JOIN FactWorkItemLinkHistory flh ON flh.SourceWorkItemID = h.ID AND flh.WorkItemLinkTypeSK = @TestedByLinkTypeSK AND flh.RemovedDate = CONVERT(DATETIME, '9999', 126) AND flh.TeamProjectCollectionSK = @TeamProjectCollectionSK JOIN [CurrentWorkItemView] wi ON flh.TargetWorkItemID = wi.[System_ID] AND wi.[System_WorkItemType] = @TestCase AND wi.ProjectNodeGUID = @ProjectGuid -- Customization 1 of 3: only include test status information when test case area path = root. Added the following 2 statements AND wi.AreaPath = '{the root area path of the team project}' … Customization 2 of 3 … -- Get the Bugs linked to the deliverable workitems directly DECLARE @Bugs Table (ID int, ActiveBugs int, ResolvedBugs int, ClosedBugs int, ProposedBugs int) INSERT @Bugs SELECT h.ID, SUM (CASE WHEN wi.[System_State] = @Active THEN 1 ELSE 0 END) Active, SUM (CASE WHEN wi.[System_State] = @Resolved THEN 1 ELSE 0 END) Resolved, SUM (CASE WHEN wi.[System_State] = @Closed THEN 1 ELSE 0 END) Closed, SUM (CASE WHEN wi.[System_State] = @Proposed THEN 1 ELSE 0 END) Proposed FROM @Hierarchy h JOIN FactWorkItemLinkHistory flh ON flh.SourceWorkItemID = h.ID AND flh.TeamProjectCollectionSK = @TeamProjectCollectionSK JOIN [CurrentWorkItemView] wi ON wi.[System_WorkItemType] = @Bug AND wi.[System_Id] = flh.TargetWorkItemID AND flh.RemovedDate = CONVERT(DATETIME, '9999', 126) AND wi.[ProjectNodeGUID] = @ProjectGuid -- Customization 2 of 3: only include test status information when test case area path = root. Added the following statement AND wi.AreaPath = '{the root area path of the team project}' GROUP BY h.ID … Customization 2 of 3 … -- Add the Bugs linked to the Test Cases which are linked to the deliverable workitems -- Walks the links from the user stories to test cases (via the tested by link), and then to -- bugs that are linked to the test case. We don't need to join to the test case in the work -- item history view. -- -- [WIT:User Story/Requirement] --> [Link:Tested By]--> [Link:any type] --> [WIT:Bug] INSERT @Bugs SELECT tc.DeliverableID, SUM (CASE WHEN wi.[System_State] = @Active THEN 1 ELSE 0 END) Active, SUM (CASE WHEN wi.[System_State] = @Resolved THEN 1 ELSE 0 END) Resolved, SUM (CASE WHEN wi.[System_State] = @Closed THEN 1 ELSE 0 END) Closed, SUM (CASE WHEN wi.[System_State] = @Proposed THEN 1 ELSE 0 END) Proposed FROM @TestCases tc JOIN FactWorkItemLinkHistory flh ON flh.SourceWorkItemID = tc.TestCaseID AND flh.RemovedDate = CONVERT(DATETIME, '9999', 126) AND flh.TeamProjectCollectionSK = @TeamProjectCollectionSK JOIN [CurrentWorkItemView] wi ON wi.[System_Id] = flh.TargetWorkItemID AND wi.[System_WorkItemType] = @Bug AND wi.[ProjectNodeGUID] = @ProjectGuid -- Customization 3 of 3: only include test status information when test case area path = root. Added the following statement AND wi.AreaPath = '{the root area path of the team project}' GROUP BY tc.DeliverableID … 5. Save the report and you’re all set. Note: you may need to re-apply custom parameter changes like pre-selected sprints.

Read the article

Does Jquery and Mootools usually have conflict if both are used on a webpage? [migrated]

- by Charming Prince

I have this website am designing, i tried using mootools 1.31 to animate some of the div boxes when clicked or when the mouse hover rounds it, to shows the content. the thing is that it doesn't seem to work on the webpage, but if i try the same script on a blank webpage it works, am thinking probably it's because i have Jquery 1.52 on the same page and maybe both scripts are conflicting with each other because, if i remove the Jquery, the Mootools works. What should be my option, because i need the Jquery to do some validations for me, so i can't remove it completely. Here are the codes <script> //-vertical var mySlide = new Fx.Slide('test'); $('slidein').addEvent('click', function(e){ e = new Event(e); mySlide.slideIn(); e.stop(); }); $('slideout').addEvent('click', function(e){ e = new Event(e); mySlide.slideOut(); e.stop(); }); $('toggle').addEvent('click', function(e){ e = new Event(e); mySlide.toggle(); e.stop(); }); $('hide').addEvent('click', function(e){ e = new Event(e); mySlide.hide(); e.stop(); }); </script> here's the HTML <html> <h3 class="section">Fx.Slide Vertical</h3> <a id="slideout" href="#">slideout</a> | <a id="slidein" href="#">slidein</a> | <a id="toggle" href="#"> toggle</a> | <a id="hide" href="#">hide</a> <div id="test"> Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad mi nim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum. </div> Here's the CSS #test { background: #222; color: #fff; padding: 10px; margin: 20px; border: 10px solid pink; } #test2 { background: #222; color: #fff; padding: 10px; margin: 20px; border: 10px solid pink; } Am using the exact same code supplied by Mootools in their own example, if i do this on a blank webpage it works but incorporated into my own webpage, it doesn't, and my own page just have the script tag of the Jquery in the head section of the HTML.

Read the article

Failed to unmount partitions

- by msknapp

I'm trying to install ubuntu from a pen drive. I have windows 7 installed already and want to keep that installation. I have a 3TB drive that has one 2TB partition on it, so the last 1TB is completely unused, which is where I want to install ubuntu. I started ubuntu in "try ubuntu" mode and then opened gparted, and then deleted the unused partition for the last third of my drive, then tried to install ubuntu. During the install, it asked me if I wanted to unmount the drives I already have The installer has detected that the following disks have mounted partitions: /dev/sda, /dev/sdb Do you want the installer to try to unmount the partitions on these disks before continuing? If you leave them mounted, you will not be able to create, delete, or resize partitions on these disks, but you may be able to install to existing partitions there. No, Yes I said no because I don't want to lose my windows 7 installation, nor any of that data. I wonder, if I had said yes above, would I have lost all the data on those drives? Anyways, I hit no and continued. I chose to install ubuntu alongside windows 7, and hit continue. A few minutes passed when this popup appeared: Failed to unmount partitions The installer needs to commit changes to partition tables, but cannot do so because the partitions on the following mount points could not be unmounted: /media/ubuntu/Three\ Terabyte Drive Terabyte\ DriveDrive Please close any applications using these mount points. Would you like the installer to try to unmount these partitions again? Go Back, Continue Why is this not working? What am I supposed to do? ========== Update: I went ahead and said yes, it can unmount those partitions. It finished installing Ubuntu, but now when i start my machine it just takes me to the grub rescue prompt. Seems like it broke something. What can I do now? =============== Results of fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00027e14 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 976771071 488282112 7 HPFS/NTFS/exFAT WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 4294967295 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdc: 16.0 GB, 16008609792 bytes 255 heads, 63 sectors/track, 1946 cylinders, total 31266816 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 * 32 31266815 15633392 c W95 FAT32 (LBA) Disk /dev/sdd: 999.5 GB, 999501594624 bytes 255 heads, 63 sectors/track, 121515 cylinders, total 1952151552 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002ae3f Device Boot Start End Blocks Id System /dev/sdd1 2048 1952151551 976074752 7 HPFS/NTFS/exFAT

Search Results

Search found 54073 results on 2163 pages for 'device instance id'.

Page 357/2163 | < Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364 | Next Page >

- by Omniwombat

- by Guard

- by ybbest

- by mugetsu

- by D'Arcy Lussier

- by Chris Hoffman

- by sebikul

- by pinaldave

- by Get Proactive Customer Adoption Team

- by Narendra Tiwari

- by TK Kocheran

- by David Allan

- by Manish Palaparthy

- by Jeff Taylor-Oracle

- by Brian Schroer

- by Vinoth Prakash

- by user3587554

- by RaidPinata

- by hinkmond

- by JohnMerlino

- by user142295

- by Bob Hardister

- by Charming Prince

- by msknapp

< Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364 | Next Page >