Search Results

Search found 14131 results on 566 pages for 'note'.

Page 357/566 | < Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >

• Windows 7 Blank Screen on Boot / Login

  - by Greg

  I have a new system that's having a few problems... sometimes (seems to be when the PC is cold, i.e. has been switched off for a while, though that could be my imagination) I get a blank blue screen when I boot up. The system boots normally and auto-logs-in. The desktop loads and I'm even able to launch applications, but then everything disappears and the screen goes to the default windows desktop blue colour (not the desktop image, just a plain blue with no mouse cursor). At this point the machine completely locks up - I'm unable to even toggle Num Lock and have to hold in the power button for 5 seconds to kill it. Interestingly if I manage to launch some applications before it goes blank, they will usually crash... sometimes explorer.exe will crash too. When I reboot, the system is fine and stable. I've installed the latest graphics drivers and run memtest86+ for 6 passes (and counting) with no errors. The system specs are: CPU: Intel I7 2.66 @ 3.4GHz RAM: 6GB (3 * 2GB DDR3) HDD: 128GB Crucial M225 SSD Motherboard: Gigabyte EX58-UD3R Gfx: ATI Radeon Sapphire 5870 1GB Note: There are a few similar questions but I haven't found one that matches my symptoms

  Read the article

• How to configure VirtualBox server for performance at home

  - by BluJai

  I currently have two physical Ubuntu Server 10.10 servers at home: one serves as our firewall/router/DHCP/VPN server and the other performs double-duty as a file server and a VirtualBox host for an Ubuntu Desktop 10.10 machine which I use from remote connections (via NoMachine) for many thin-client purposes which are irrelevant to my question. What I'd like to accomplish is to consolidate the two physical machines into one which is a dedicated VirtualBox host (most likely running Ubuntu Server 10.10). Note that I'd like to stick with VirtualBox (if possible) because I'm most comfortable with it and use it on a daily basis at both home and work. Specifically, I plan to have one VM set up as file server, another as the firewall/router/DHCP/VPN (or possibly split those a bit) and a third, which is the only current VM (already VirtualBox), which is the thin-client host. My question comes down to performance and/or recommendations about the file server VM. The file server hosts about 6 terabytes of data across 4 drives. What I'd like to do is use raw disk access from the VM directly to the existing disks. However, I'm curious what performance advantage/disadvantage that would have as compared to using shared folders from the VM host and basically just have the whole drive served as a shared folder to the VM which would then serve it to the other machines on the network. I don't know if virtual disks would even work in this scenario and I certainly wouldn't want a drive to be filled with just a single file which is 1.5 TB (disk image). To add understanding of context, but not to get additional advice, I want to virtualize these machines because I intend to regularly use the snapshot capabilities of VirtualBox for the system disks (which will be virtual drives) of the VMs and I have some physical space/power needs to address (as I mentioned, this is at home).

  Read the article

• uWSGI cannot find "application" using Flask and Virtualenv

  - by skyler

  Using uWSGI to serve a simple wsgi app, (a simple "Hello, World") my configuration works, but when I try to run a Flask app, I get this in uWSGI's error logs: current working directory: /opt/python-env/coefficient/lib/python2.6/site-packages writing pidfile to /var/run/uwsgi.pid detected binary path: /opt/uwsgi/uwsgi setuid() to 497 your memory page size is 4096 bytes detected max file descriptor number: 1024 lock engine: pthread robust mutexes uwsgi socket 0 bound to TCP address 127.0.0.1:3031 fd 3 Python version: 2.6.6 (r266:84292, Jun 18 2012, 14:18:47) [GCC 4.4.6 20110731 (Red Hat 4.4.6-3)] Set PythonHome to /opt/python-env/coefficient/ *** Python threads support is disabled. You can enable it with --enable-threads *** Python main interpreter initialized at 0xbed3b0 your server socket listen backlog is limited to 100 connections *** Operational MODE: single process *** added /opt/python-env/coefficient/lib/python2.6/site-packages/ to pythonpath. unable to find "application" callable in file /var/www/coefficient/flask.py unable to load app 0 (mountpoint='') (callable not found or import error) *** no app loaded. going in full dynamic mode *** *** uWSGI is running in multiple interpreter mode ***` Note in particular this part of the log: unable to find "application" callable in file /var/www/coefficient/flask.py unable to load app 0 (mountpoint='') (callable not found or import error) **no app loaded. going in full dynamic mode** This is my Flask app: from flask import Flask app = Flask(__name__) @app.route("/") def hello(): return "Hello, World, from Flask!" Before I added my Virtualenv's pythonpath to my configuration file, I was getting an ImportError for Flask. I solved this though, I believe (I'm not receiving errors about it anymore) and here is my complete configuration file: uwsgi: #socket: /tmp/uwsgi.sock socket: 127.0.0.1:3031 daemonize: /var/log/uwsgi.log pidfile: /var/run/uwsgi.pid master: true vacuum: true #wsgi-file: /var/www/coefficient/coefficient.py wsgi-file: /var/www/coefficient/flask.py processes: 1 virtualenv: /opt/python-env/coefficient/ pythonpath: /opt/python-env/coefficient/lib/python2.6/site-packages This is how I start uWSGI, from an rc script: /opt/uwsgi/uwsgi --yaml /etc/uwsgi/conf.yaml --uid uwsgi And if I try to view the Flask program in a browser, I get this: **uWSGI Error** Python application not found Any help is appreciated.

  Read the article

• Script errors when run by launchd at startup, but not when run in Terminal

  - by Mechcozmo

  Hello. I'm attempting to create a RAM disk that loads the previous contents when the system starts up, and every six hours writes the contents to a disk image. Currently, when you run the script from the terminal ("sudo bash LogToRAM.sh") everything works fine. But when run from launchd during startup, it doesn't work. Here's the lines from the log; the first line just gives some idea as to where in the boot process we are: SecurityAgent[202] Showing Login Window com.mechcozmo.LogToRAM[51] + /Developer/usr/bin/SetFile -a V /Volumes/LogfileRAMdisk com.mechcozmo.LogToRAM[51] ERROR: File Not Found. (-43) on file: /Volumes/LogfileRAMdisk com.mechcozmo.LogToRAM[51] + /usr/sbin/asr -source '/Library/Application Support/LogToRAM/RAMdisk_store.dmg' -target /Volumes/LogfileRAMdisk/ -noverify Here is the script and plist file in question. Note that 'set -vx' is up at the top of the script; it give a lot of information about what is happening in the script. My current theory is that the /Volumes directory does not exist at this stage of the boot process, but that seems unlikely to be honest.

  Read the article

• Computer Comparison - which is "better"

  - by David Murdoch

  A company I work with recently replaced their old server and gave it to me. Their old server is a Dell PowerEdge 2600. I've been playing with the machine and even installed Windows Server 2008 on it...and it seems to run it pretty well. Here are the specs for the two machines: Dev Machine: AMD Athlon64 3000+ 2.38 GHz (overclocked from 1.8GHz [@ 280x8.5] - it is stable-ish) Memory (RAM): 1x1GB OCZ PC3200 (Dual-Channel) 300GB HD OS: Windows XP Pro (32bit) SuperPi 1M digit test: 40 seconds Dell PowerEdge 2600 Server: Intel Xeon CPU 2.8GHz 2.8GHz Memory (RAM): 512MBx2 (PC2700, not dual channel) 68GB HD (RAID 5) OS: Windows Server 2000 (32bit) SuperPi 1M digit test: 56 seconds [using 1 processor] (Themes and Aero-Flass UI turned off, of course) I use my computer to regularly run Photoshop CS5, Illustrator CS5, Flash CS5, 5 browsers (Chrome, FF, IE, Safari, Opera), iTunes, Visual Studio 2010, and Kaspersky Internet Security 2010 [sometimes simultaneously :-) ]. The SuperPi test has my dev machine coming in about 30% faster than the Server machine...though this could be due to the server running "Vista" with background processes prioritized. Do you think it would be realistic/advantageous for me to move from my dev machine to the Dell PowerEdge 2600? Is it possible to install additional DVD drives/burners on the server? Can I install my internal 300 GB hard drive on the server? Can I add some USB 2.0 ports? Note: I'll probably install Win XP Pro on the dev machine if I do switch. If not, are there any creative and useful way for me to take advantage of this server (with the goal of faster computing)?

  Read the article

• Multiple Internet connections, multiple networks and split access in Linux

  - by Swapneel Patnekar

  I am having trouble setting up multiple internet connections for split access in Linux. We have 3 internet connections from 3 different ISP's. We want to configure our Linux gateway machine such that our three internal networks 10.2.1.0/24, 192.168.20.0/24 & 192.168.2.0/24 use ISP1, ISP2 and ISP3 respectively in a split access manner. Outlined below is the layout/settings, Interfaces of the Linux Gateway connected to Routers: eth0: 10.1.1.2<---------->10.1.1.1(Internal Interface of ADSL Router)[ISP1] eth1: 192.168.15.2<------>192.168.15.1(Internal Interface of 3G Router)[ISP2] eth3: 192.168.1.2<------->192.168.1.1(Internal Interface of ADSL Router)[ISP3] Kindly note that none of the interfaces in the Linux gateway has a public static IP address. Routers of ISP1 and ISP2 get assigned a dynamic public IP address when connected to the Internet, router of ISP3 has been assigned a public static IP address. Interface of Linux gateway connected to a switch, eth4: 10.2.1.1(LAN Interface for ISP1) eth4:0 192.168.20.1(LAN interface for ISP2) eth4:1 192.168.2.1(LAN Interface for ISP3) eth4:0 & eth4:1 are virtual interfaces with eth4 being the interface connected physically. Based on http://linux-ip.net/html/adv-multi-internet.html I've set the following routes, ip route flush table 4 ip route show table main | grep -Ev ^default | while read ROUTE ; do ip route add table 4 $ROUTE done ip route add table 4 default via 192.168.15.1 ip rule add fwmark 4 table 4 ip route flush cache Additionally, using the following iptables rules to mark & route packets as per the guide mentioned above : http://pastebin.com/KzWHFGJA At this point, computers from 192.168.2.0/24 network are successfully able to reach the Internet through ISP3. 192.168.20.0/24 and 10.2.1.0/24 are unable to access the Internet through ISP1 and ISP2 respectively. Any inputs will be much appreciated !

  Read the article

• What's the state of the art in image upscaling?

  - by monov

  I like to collect cool pics and use them as wallpapers or for other things. Often, artists publish only low-res versions, probably for fear of theft. Example: Gabriel Pulecio's BIRDS Now, if I want to use that as a wallpaper, I'd have to upscale it, and obviously that'd make it look blurry because of the bicubic interpolation. I realize there's no real way to get a high-res version from a low-res pic, because the information is not simply there. That said, I'm wondering if heuristics have been developed for upscaling with less apparent loss of quality. Those would probably be optimized for specific image types. For photorealistic pictures, for cartoons with large flat areas, for pixel art... One algorithm I'm aware of is Seam Carving. It works for some kinds of pics, especially ones with a plain, undetailed or uninteresting background, and a subject that strongly stands out. But it's far from being general-purpose. Applying it to the above pic produces this. It looks quite sharp, but the proportions are horribly distorted because the algorithm is not designed for this kind of pic. Another is Pixel art scaling algorithms. Those are completely unfit for anything other than actual pixel art that's pixelized to begin with. For example, I tried the scale2x windows binary on my pic, but its output was nearly indistinguishable from nearest-neighbour scaling because the algorithm didn't detect any isolated pixely fragments to work from. Something else I tried was: I enlarged the image in Photoshop with bicubic interpolation, then I applied unsharp mask. The result looks pretty bad. The red blotch is actually resized reasonably well, but the dove is far from it. What I'm looking for is some app that makes a best-effort attempt at upscaling any input image while minimizing blurriness. If you know of any, I'll be thankful. Note that the subjective prettiness and sharpness of the result is what matters... the result doesn't need to be completely faithful to the original small image.

  Read the article

• HTML tabindex: Put some links last without complete enumeration

  - by Emanuel Berg

  I know I can use the HTML anchor attribute tabindex to set the tabindex of links, i.e., in what order they get focused when the user hits Tab (or Shift-Tab). But, I have a home page with tons of links, and to enumerate all those is a lot of work. The actual case is, I have four image links that by default gets index 1, 2, 3, and 4 (well, the behavior is equivalent, at least). But, I'd much rather have the first non-image link as number 1. Check it out here and you'll understand immediately. I tried to give the first non-image link (the link I desire to have tabindex 1) - I tried to give it tabindex 1 explicitly, hoping that it would cascade from there, but it didn't (i.e., the first image link got implicit tabindex 2). I also tried to give the image links ridiculously high tabindexes, but that didn't work: as the other links didn't have tabindexes at all, those highs were still "first". As a last resort (the solution currently employed) I gave the image links all tabindex -1. That makes for logical tabbing, but, it is suboptimal, as those image links are excluded from the tab loop - a user tabbing away will probably never realize that the images are clickable. I'd like them to be reachable with tabbing, but last, after all the ordinary links. If you wonder why I'm so determined to achieve this, it has to do with my own finger habits: I almost exclusively search for links, tab back, tab forth, etc., and very seldom using the mouse. Note: I'll accept a script to change the actual HTML for a complete enumeration, if you convince me there is no "set" way to solve this problem.

  Read the article

• Problem posting multipart form data using Apache with mod_proxy to a mongrel instance

  - by Ryan E

  I am attempting to simulate my site's production environment as closely as I can on my local machine. This is a rails site that uses Apache w/ mod_proxy to forward requests to a mongrel cluster. On my Mac OSX Leopard machine, I have the default install of apache running and have configured a vhost to use mod_proxy to to forward requests to a local running mongrel instance on port 3000. <Proxy balancer://mongrel_cluster-development> BalancerMember http://127.0.0.1:3000 </Proxy> For the most part, this is working fine. I can browse my development site using the ServerName of the vhost I configured and can confirm that requests are being properly forwarded to the mongrel instance. However, there is a page on the site that has a multipart form that is used to upload an image to the server. When I post this form, there is a delay of about 5 minutes and the browser ultimately returns a Bad Request Your browser sent a request that this server could not understand. In the error log for my vhost: [Tue Sep 22 09:47:57 2009] [error] (70007)The timeout specified has expired: proxy: prefetch request body failed to 127.0.0.1:3000 (127.0.0.1) from ::1 () This same form works fine if I browse directly to the mongrel instance (http://127.0.0.1:3000). Anybody have any idea what the problem might be and how to fix it? If there is any important information that I neglected to include, post a comment, and I can add to this question. Note: Upon further investigation, this appears to be a problem specific to Safari. The form works fine in Firefox.

  Read the article

• File corruption after copying files in Windows 7 64 bit using two methods

  - by DustByte

  I have 5000 pictures and other files in a directory taking up 35 GB. I want to duplicate this directory. Method 1: I do a simple copy and paste of the directory in explorer. I have the habit of checking the checksums after copying important files. In this case I noticed that around 2000 files failed the MD5 test. At a closer inspection of a randomly chosen JPEG with different checksums it turns out that some XMP metadata had changed. In particular, the tag <MicrosoftPhoto:DateAcquired> had changed the date from 2009 to today (possibly around the time I was copying the files). I have no idea what triggered this XMP data to be changed and exactly when it was changed and why for these particular files, but at least it seems to explain the checksum discrepancy. Method 2: As I want the exact files to be duplicated, I tried the program FreeFileSync to mirror the directory, hoping no XMP metadata would mysteriously change. A checksum test in addition to a thorough file comparison test in FreeFileSync lead to two similar but yet different results: 31 files fail the checksum test, 23 files fail the file comparison test. The smaller set is not entirely contained in the bigger set, although many files occur in both. What is alarming here is that not only JPEGs are flagged as altered but also som AVIs, MPGs and a large 7-zip file. Closer inspection of a JPEG indicates that it is indeed corrupt: the bottom half of the picture is simply plain gray. Due to the size of the 7-zip file, I have not been able to pin down the discrepancy. Note, in both methods, every file has its correct file size after being copied. Question: Any thoughts on what is possibly going on here? I have never had this problem before, and I am now terrified that files get corrupted after simple actions like copy/paste and file sync. Even if I manage to successfully copy the files somehow, I would still like an explanation to this.

  Read the article

• Routing for Two Hosts Behind a IPSec Tunnel

  - by Brent

  Network A 10.110.15.0/24 Firewall is .1 Host A is .2 Network B 10.110.16.0/24 Firewall is .1 Host B is .2 Two Cisco ASA's. IPSec tunnel with a crypo map that secures 10.110.15.0/24 <- 10.110.16.0/24. Let's say two hosts, 10.110.15.2 and 10.110.16.2 need to talk to each other. Normally I have to enter a persistent static route on a each host along the lines of: route add 10.110.16.0 mask 255.255.255.0 10.110.15.1 metric 1 -p (on the "A" box) I also have to enter another persistent static route on the .16 host in order for the traffic to know how to get back to the .15 network. Note that the default for each machine IS the firewall, so .1. I have no problem adding persistent routes on Windows/ESX/*nux machines but what about a smart switch in the .16 network that I want to manage from the .15 network. Do I need to run a routing protocol? Do I need to have Reverse Route Injection enabled on both ends of the IPSec tunnel? Should I add a route on the firewall? If so, how do you formulate it? Does it get a metric of 1 and my default route 0.0.0.0 get a metric of 2?

  Read the article

• CentOS OpenVZ fail to boot after kernel update

  - by SkechBoy

  After upgrading to latest OpenVZ kernel CentOS server won't boot. When i try go boot the latest kernel server is stuck at this point: (note that images are taken from virtual kvm) http://i.stack.imgur.com/4lusz.jpg Then i try to start the server on some old kernels and than i get this error message: kernel panic - not syncing - attempted to kill init better shown on this image: http://i.stack.imgur.com/2SReF.jpg Here is some useful information fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2995.7 GB, 2995739688960 bytes 255 heads, 63 sectors/track, 364211 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004c4e4 Device Boot Start End Blocks Id System /dev/sda1 1 523 4199044+ 82 Linux swap / Solaris /dev/sda2 524 785 2104515 83 Linux /dev/sda3 786 261869 2097157230 83 Linux /dev/sda4 261870 364211 822062115 83 Linux /etc/fstab proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/sda1 none swap sw 0 0 /dev/sda2 /boot ext3 defaults 0 0 /dev/sda3 / ext3 defaults 0 0 /dev/sda4 /home ext3 defaults 0 0 and grub config file: title OpenVZ (2.6.18-274.18.1.el5.028stab098.1) root (hd0,1) kernel /vmlinuz-2.6.18-274.18.1.el5.028stab098.1 ro root=/dev/sda3 vga=0x317 selinux=0 initrd /initrd-2.6.18-274.18.1.el5.028stab098.1.img title OpenVZ (2.6.18-274.7.1.el5.028stab095.1) root (hd0,1) kernel /vmlinuz-2.6.18-274.7.1.el5.028stab095.1 ro root=/dev/sda3 vga=0x317 selinux=0 initrd /initrd-2.6.18-274.7.1.el5.028stab095.1.img title OpenVZ (2.6.18-194.8.1.el5.028stab070.4) root (hd0,1) kernel /vmlinuz-2.6.18-194.8.1.el5.028stab070.4 ro root=/dev/sda3 vga=0x317 initrd /initrd-2.6.18-194.8.1.el5.028stab070.4.img Any help is greatly appreciated Thanks.

  Read the article

• FreeBSD slow transfers - RFC 1323 scaling issue?

  - by Trey

  I think I may be having an issue with window scaling (RFC 1323) and am hoping that someone can enlighten me on what's going on. Server: FreeBSD 9, apache22, serving a static 100MB zip file. 192.168.18.30 Client: Mac OS X 10.6, Firefox 192.168.17.47 Network: Only a switch between them - the subnet is 192.168.16/22 (In this test, I also have dummynet filtering simulating an 80ms ping time on all IP traffic. I've seen nearly identical traces with a "real" setup, with real internet traffic/latency also) Questions: Does this look normal? Is packet #2 specifying a window size of 65535 and a scale of 512? Is packet #5 then shrinking the window size so it can use the 512 scale and still keep the overall calculated window size near 64K? Why is the window scale so high? Here are the first 6 packets from wireshark. For packets 5 and 6 I've included the details showing the window size and scaling factor being used for the data transfer. Code: No. Time Source Destination Protocol Length Info 108 6.699922 192.168.17.47 192.168.18.30 TCP 78 49190 http [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=8 TSval=945617489 TSecr=0 SACK_PERM=1 115 6.781971 192.168.18.30 192.168.17.47 TCP 74 http 49190 [SYN, ACK] Seq=0 Ack=1 Win=65535 Len=0 MSS=1460 WS=512 SACK_PERM=1 TSval=2617517338 TSecr=945617489 116 6.782218 192.168.17.47 192.168.18.30 TCP 66 49190 http [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSval=945617490 TSecr=2617517338 117 6.782220 192.168.17.47 192.168.18.30 HTTP 490 GET /utils/speedtest/large.file.zip HTTP/1.1 118 6.867070 192.168.18.30 192.168.17.47 TCP 375 [TCP segment of a reassembled PDU] Details: Transmission Control Protocol, Src Port: http (80), Dst Port: 49190 (49190), Seq: 1, Ack: 425, Len: 309 Source port: http (80) Destination port: 49190 (49190) [Stream index: 4] Sequence number: 1 (relative sequence number) [Next sequence number: 310 (relative sequence number)] Acknowledgement number: 425 (relative ack number) Header length: 32 bytes Flags: 0x018 (PSH, ACK) Window size value: 130 [Calculated window size: 66560] [Window size scaling factor: 512] Checksum: 0xd182 [validation disabled] Options: (12 bytes) No-Operation (NOP) No-Operation (NOP) Timestamps: TSval 2617517423, TSecr 945617490 [SEQ/ACK analysis] TCP segment data (309 bytes) Note: originally posted http://forums.freebsd.org/showthread.php?t=32552

  Read the article

• Cannot 301 redirect with IIS URL Rewrite Module

  - by Justin

  I am trying to troubleshoot my issue with the URL Rewrite Module on IIS 7. I migrated a Wordpress blog over to BlogEngine.net. There were only about 5 entries that I wanted to use 301 redirects to the new blog, so I wanted to simply create 5 exact match redirect rules using the rewrite module. For some reason the exact match rule never seems to take effect, I always get a 404 error when the original url is navigated to. I verified that my exact match pattern matched the existing backlinks and it does. I then tried a simple test and got the same behavior, no redirection. I created a page, test.html, on my site, I then created a second page, test2.html. So my exact match pattern is: "http://www.mydomain.com/test.html" And the rule is supposed to do a 301 redirect to "http://www.mydomain.com/test2.html " The redirect never happens. I created the steps for the rule based on the instructions in this page: http://learn.iis.net/page.aspx/461/creating-rewrite-rules-for-the-url-rewrite-module/ I don't see that I left out a step. After I apply the rule I've even gone as far as doing an IISReset to make sure it would be in effect but still no luck. Any thoughts on what I might have left out? (Note: my rewrite rules dont include the " " around them but I had to add since serverfault thinks I am trying to spam the system with multiple urls.)

  Read the article

• Selective Pointer device remapping in linux

  - by user6368

  I just got an HP 2710p (hp tablet, with digitizer), and I've played around with linux for a while now, and thought I would go ahead and install it. Everything works fine, excepting normal tablet functions, which is to be expected. I'm working on the screen rotation, and there are on-screen keyboards, etc, but I'm having issues with the stylus. I can tap and left click with the stylus as normal, but the side button (which in windows functions as a right mouse button) appears as a 'button 2' to xev (a middle/scroll wheel button). I can switch 'button 2' and 'button 3' universally using xmodmap, but I'd like to do so exclusively for stylus so I don't screw up regular pointing devices. Altering xorg.conf (which is surprisingly bare) with the recommended sections (adding sections for each of the stylus buttons) does nothing. I'm running crunchbang, which is an ubuntu/debian varient with openbox as the windows manager. Thanks Also, as a seperate note, does anybody know how to detect when I rotate and/or latch the lid shut? I was thinking maybe I could run a script to switch the buttons when I close it, but I can't find any information.

  Read the article

• Word 2013 can't compare readonly files

  - by Moshe Katz

  I am using Tortoise SVN to work with a repository that contains some documentation saved as Word documents. On my old computer, with Office 2010, I was able to compare with previous revisions. Tortoise would open Word in compare view so I could see the differences between the files. I have installed Office 2013 (final version from Technet, not the preview version) on my new laptop for testing and now I can no longer compare Word Documents. Tortoise pops up a generic error that it was unable to compare the two files. Tortoise uses a JScript file to interface with Word, so I ran that file through a debugger and found that the actual error is: The Compare method or property is not available because this command is not available for reading. Some Googling followed by some testing revealed that the error is caused by the first file opened (in this case, the previous version) being opened as Read-Only. If I change the JScript code to open in normal mode, and I find the file on the system and un-check the "Read Only" property (if necessary), then the comparison opens as expected. I was unable to find any documentation about this change to Word on any Microsoft site. Does anyone know why this has been changed, and if it is intentional and not a bug, what the benefit is of requiring the file to be writable in order to compare it with another? Note: This is tagged word-2013-preview but it is actually for the release version of Word that is available on MSDN and Technet. I do not have enough rep. on this site to create new tags (yet).

  Read the article

• Winamp question: Generating 'dynamic playlists' from file playlists -OR- mass-tagging by file playli

  - by Daddy Warbox

  I'm trying to think of a way to do this. I sort my songs into a variety of playlists corresponding to different 'moods' I might have as I listen to them, and some songs fit for more than one kind of mood (e.g. a jazz song might be 'stylish' and 'emotional', or something to that effect). I also give them star ratings for a general sort of opinion about them. I want to be able to filter and sort my media library by the moods I want or don't want, as well as by star rating. Anyone have a good way to do something like this? I can't seem to use Winamp's dynamic playlists to generate lists from existing filesystem playlists (e.g. songs in a given .m3u files). Hand-tagging files with Winamp's tag editor is a royal pain. It's trouble enough just giving a star rating and sorting into playlists as is. If there is there a way to mass tag songs within each playlist with mood words to allow me to create dynamic playlists, I'd be fine (for now). It'd be nice if I could do this via some kind of hotkey for each song, too. I'm looking to see if I can use a macro program or something to do that, though. Thanks in advance. P.S: Alternatively, would something like Foobar have functions like this? Note: Italics are recent edits.

  Read the article

• Subversion Edge LDAP (require CAC Certificate not Username and Password)

  - by Frank Hale

  What I've Done: I've successfully installed and configured Subversion Edge 3.1.2 with LDAP support on a Windows 2008 server. I have configured LDAP users and am able to use LDAP credentials to work on repositories just fine. No issues whatsoever. Works great! What I Want To Do: I've been searching for several hours now in hopes to find some information on how to configure Subversion Edge server to require client certificates for user authentication against an LDAP environment. I have not found anything yet that gives me an indication of how to do it. I know there are SVN clients that are capable of prompting for CAC certificates but I cannot figure out how to set my server up to require it. NOTE: CAC authentication is already setup and working in the windows environment. Desired Outcome: When running svn commands that require authentication against my Subversion Edge Server I want it to prompt me for my CAC certificate instead of my Active Directory username and password. If anyone has any information on this I'd greatly appreciate it. EDIT: I'm still digging so if I find out anything I'll update this question with what I found.

  Read the article

• Running a VM off a USB 2.0 Flash Drive - Mac/Parallels/XP

  - by geerlingguy

  I use a MacBook Air as my primary machine, and the 128GB SSD means space is precious. To save about 10 GB, I've been running Parallels with a Windows XP VM off an external USB hard drive, which performs as well in everyday use as running the VM off the internal SSD. So, I bought a tiny 32GB USB 2.0 flash drive, plugged it into the MacBook Air, formatted it first as ExFAT (which was slow), then as Mac OS Extended (Journaled) (which was also slow), and copied over my VM file, and ran Parallels off it. My full experience is documented here: http://www.midwesternmac.com/blogs/jeff-geerling/running-windows-xp-vm Straight file copies are really fast — 30 MB/sec read (solid the whole time), and 10-11 MB/sec write (solid the whole time). But I noticed that once XP started running, the disk access rates were in the low KB ranges. Are USB flash drives really that poor at random access, or could I possibly be missing something (the format of the flash drive, etc.?)? Of note, I've tried the following, to no great effect: Formatting the drive as either ExFAT or Mac OS Extended (Journaled) Unplugging all other USB devices and turning off Bluetooth (which runs on the right-side-port USB bus). Plugging in the flash drive either direct in the right side port, or the left side port, or into a USB 2.0 hub

  Read the article

• Outlook error-'Can't open e-mail folders.You must connect to Exchange w/ current profile before you can sync folders w/ your Outlook data file'

  - by Emilio

  Note that the error message I put in the title of this question is abbreviated. The actual error message is below. I have an Exchange account and using Outlook 2010 as the client. I run in Cached Exchange Mode and have an .OST file locally. Recently I uninstalled and reinstalled office. I set up a new mail profile when prompted by Outlook 2010 upon first execution of the program. In my initial attempt, I pointed the data file at my existing OST file. In my second attempt, I had Outlook create a fresh empty file. In both cases I'm getting the error 'Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost).', also shown in this screenshot -- http://drop.io/4rc9v9o/asset/outlook-error-png. I don't know how to connect with the current profile - that's what I thought I did when I created a new .OST file? I've had this problem for several days so my OST file is now out of date. Once I get things running I obviously want my active mailbox to update the OST, not the other way around.

  Read the article

• How to set up a VPN Incoming connection with Windows to tunnel Internet traffic?

  - by Mehrdad

  I want to set up a VPN on a remote server to route all my Internet traffic for privacy reasons. I can set up an incoming connection and connect to it successfully. The problem is, I can just see the remote computer and no other Web sites will open. I want the remote server to act like a NAT. How can I do that? Note that I don't want to split Internet traffic. I actually want to send all the traffic to the remote server but need to make it relay the traffic. For the record, my remote server is Windows Web Server 2008 which does not have routing and remote access service. Clarification I'm mostly interested in server configuration. I don't have any problems configuring the client. By the way, Windows Web Server 2008 seems to have the same VPN features built in client OSes (like Vista) and specifically, it doesn't include the RRAS console in MMC. I'm also open to suggestions regarding third party PPTP/L2TP daemons available, if they are free.

  Read the article

• Apache2 - rewrite a bunch of specified pathname URLs to one URL

  - by James Nine

  I need to rewrite a bunch of urls (about 100 or so) for SEO purposes, and there may be more being added in the future (probably another 50-100 later on). I need a flexible way of doing this and so far, the only way I can think of is to edit the .htaccess file using the rewrite engine. For example, I have a bunch of urls like this (please note that the query string is irrelevant, and dynamic; it could be anything. I was only using them purely as an example. I am only focusing on the pathname--the part between the hostname and query string, as marked in bold below): http://example.com/seo_term1?utm_source=google&utm_medium=cpc&utm_campaign=seo_term http://example.com/another_seo_term2?utm_source=facebook&utm_medium=cpc&utm_campaign=seo_term http://example.com/yet_another_seo_term3?utm_source=example_ad_network&utm_medium=cpc&utm_campaign=seo_term http://example.com/foobar_seo_term4 http://example.com/blah_seo_term5?test=1 etc... And they are all being rewritten to (for now): http://example.com/ What's the most efficient/effective way of doing this so that I may be able to add more terms in the future? One solution I came across is to do this (in the .htaccess file): RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ / [NC,QSA] However, the problem with this solution is that even invalid urls (such as http://example.com/blah) will be rewritten to http://example.com instead of giving a 404 code (which is what it is supposed to do anyway). I'm still trying to figure out how all this works, and the only way I can think of is to write 100 more RewriteCond statements (such as: RewriteCond %{REQUEST_URI} =/seo_term1 [NC,OR]) before the RewriteRule directive. For example: RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} =/seo_term1 [NC,OR] RewriteCond %{REQUEST_URI} =/another_seo_term2 [NC,OR] RewriteCond %{REQUEST_URI} =/yet_another_seo_term3 [NC,OR] RewriteCond %{REQUEST_URI} =/foobar_seo_term4 [NC,OR] RewriteCond %{REQUEST_URI} =/blah_seo_term5 [NC] RewriteRule ^(.*)$ / [NC,QSA] But that doesn't sound very efficient to me. Is there a better way?

  Read the article

• Hourly SQL Server 2005 Slowness (Possibly caused by SYSTEM)

  - by Zorlack

  We're trying to diagnose the cause of slowness on our Database server. We're running the latest rev SQL Server 2005 on Windows 2008x64. The behavior that we're seeing is this: We see the SYSTEM process spike one of the CPUs for about 2 minutes, during this time SQL server slows down by a factor of 10. The slowness lasts until SYSTEM is done, then in an hour everything starts again. During these slowdowns disk writes don't spike, paging doesn't spike, the only noticeable precursor we see is that SYSTEM maxes out one of the sixteen (HT)CPUs. Note that this doesn't happen at the top of the hour, it just happens once an hour, and it shifts a bit depending on the length of the incident. At the moment this is causing intermittent slowdowns, but when the server is really busy it can cause Worker Thread starvation. The server is a Dual Quad Dell R710 with 96GB of RAM and RAID10 data/log disks. Has anyone experienced this kind of problem? Does anyone know where we should look?

  Read the article

• Cannot find "IIS APPPOOL\{application pool name}" user account in Windows Server 2008

  - by MacGyver

  Normally when setting up IIS 7, I'm used to allowing permissions to user IIS APPPOOL\{application pool name} on the root folder of my web application(s). I also give permissions to IUSR (or the IIS_IUSRS user group. (Note, in Windows Server 2008, I found that IUSR isn't in that group by default, so I added it). In Windows Server 2008, I cannot find user IIS APPPOOL\{application pool name} under Security under the Windows Folder Properties. I'm using Windows Authentication in ASP.NET. I'm receiving a 401.1 on the page in Internet Explorer 8 after getting the authentication prompt. Mozilla Firefox also gave me a Windows authentication prompt, and got me into the site fine. Same with Google Chrome. How can I solve this one? HTTP Error 401.1 - Unauthorized You do not have permission to view this directory or page using the credentials that you supplied. Specific page information: Module: WindowsAuthenticationModule Notification: AuthenticateRequest Handler: PageHandlerFactory-ISAPI-4.0_32bit Error Code: 0x8009030e Requested URL: http://.....aspx Physical Path: C:\.........aspx Logon Method: Not yet determined Logon User: Not yet determined

  Read the article

• Gmail.com detect mail as spam, but the server is not on any BlackList

  - by Tomer W

  I have an issue with Google. (GMail to be exact) About 1 month ago, we had a security breach, and mail was relayed through our servers. we got listed in almost ALL Black-Lists :( we fixed the problem, and requested removal from Black-lists, which was granted easily. currently (over 3 weeks), we are not sending any spam anymore. furthermore, we got clear from all the Black-lists (MxToolBox Black-List Search Result) But, GMail still refuse to get Anything from the server, stating '550 Spam'. Following, Telnet attempt to send to gmail: 220 mx.google.com ESMTP g47si45436208eep.123 helo megatec.co.il 250 mx.google.com at your service mail from: <[email protected]> 250 2.1.0 OK g47si45436208eep.123 rcpt to: <[email protected]> 250 2.1.5 OK g47si45436208eep.123 Data 354 Go ahead g47si45436208eep.123 Test123 . 550-5.7.1 [62.219.123.33 11] Our system has detected that this message is 550-5.7.1 likely unsolicited mail. To reduce the amount of spam sent to Gmail, 550-5.7.1 this message has been blocked. Please visit 550-5.7.1 http://support.google.com/mail/bin/answer.py?hl=en&answer=188131 for 550 5.7.1 more information. g47si45436208eep.123 Connection to host lost. i tried filling the form @ Gmail - Report Delivery Problem i also tried reaching Google by phone, but the message was to go to the Link mentioned above. I Checked ReverseDNS and is ok... We dont have TLS, but that shouldn't be a problem, shouldn't it? Note: we are not a Bulk sender. Anyone has an idea? what can be blocking our IP? Anyone know whom can be contacted in order to resolve this BL listing?

  Read the article

< Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >