Search Results

Search found 15209 results on 609 pages for 'configuration'.

Page 358/609 | < Previous Page | 354 355 356 357 358 359 360 361 362 363 364 365  | Next Page >

  • Cannot connect to network

    - by dany
    I have a problem: I am on Debian. I configured my nic with a static ip (192.168.1.56). When I try to connect to a network, initially with ifconfig eth2 I get (correctly): eth2 inet addr:192.168.1.56 .... inet6 addr: fe80:221:ff:fe96:4598/64 but after a few seconds the 192.168.1.56 disappears and after some other seconds disappears the inet6 address too. When I press in the nm-applet it requires me the password but in the meantime it try to connect. At uni, the connection is a DHCP one. It works for the first few seconds but after it doesn't. Any possible solution? Here it is the relevant part of the syslog: (static ip configuration) http://pastebin.com/u3BPAsda

    Read the article

  • ODI 11g - Faster Files

    - by David Allan
    Deep in the trenches of ODI development I raised my head above the parapet to read a few odds and ends and then think why don’t they know this? Such as this article here – in the past customers (see forum) were told to use a staging route which has a big overhead for large files. This KM is an example of the great extensibility capabilities of ODI, its quite simple, just a new KM that; improves the out of the box experience – just build the mapping and the appropriate KM is used improves out of the box performance for file to file data movement. This improvement for out of the box handling for File to File data integration cases (from the 11.1.1.5.2 companion CD and on) dramatically speeds up the file integration handling. In the past I had seem some consultants write perl versions of the file to file integration case, now Oracle ships this KM to fill the gap. You can find the documentation for the IKM here. The KM uses pure java to perform the integration, using java.io classes to read and write the file in a pipe – it uses java threading in order to super-charge the file processing, and can process several source files at once when the datastore's resource name contains a wildcard. This is a big step for regular file processing on the way to super-charging big data files using Hadoop – the KM works with the lightweight agent and regular filesystems. So in my design below transforming a bunch of files, by default the IKM File to File (Java) knowledge module was assigned. I pointed the KM at my JDK (since the KM generates and compiles java), and I also increased the thread count to 2, to take advantage of my 2 processors. For my illustration I transformed (can also filter if desired) and moved about 1.3Gb with 2 threads in 140 seconds (with a single thread it took 220 seconds) - by no means was this on any super computer by the way. The great thing here is that it worked well out of the box from the design to the execution without any funky configuration, plus, and a big plus it was much faster than before, So if you are doing any file to file transformations, check it out!

    Read the article

  • The premier support for Sun Cluster 3.1 ended

    - by JuergenS
    In October 2011 the premier support for Sun Cluster 3.1 ended. See details in Oracle Lifetime Support Policy for Oracle and Sun System Software document. There no 'Extended Support' and the 'Sustaining Support Ends' is indefinite. But for indefinite 'Sustaining Support' I like to point out from the mentioned document (version Sept. 2011) on page 5: Sustaining Support does NOT include: * New program updates, fixes, security alerts, general maintenance releases, selected functionality releases and documentation updates or upgrade tools * Certification with most new third-party products/versions and most new Oracle products * 24 hour commitment and response guidelines for Severity 1 service requests *Previously released fixes or updates that Oracle no longer supports This means Solaris 10 9/10 update9 is the last qualified release for Sun Cluster 3.1. So, Sun Cluster 3.1 is not qualified on Solaris 10 8/11 Update10. Furthermore there is an issue around with SVM patch 145899-06 or higher. This SVM patch is part of Solaris 10 8/11 Update10. The 145899-06 is the first released patch of this number, therefore the support for Sun Cluster 3.1 ends with the previous SVM patches 144622-01 and 139967-02. For details about the known problem with SVM patch 145899-06 please refer to doc 1378828.1. Further this means you should freeze (no patching, no upgrade) your Sun Cluster 3.1 configuration not later than Solaris 10 9/10 update9. Or even better plan an upgrade to Solaris Cluster 3.3 now to get back to full support.

    Read the article

  • SQL Server Transaction Log RAID

    - by Eric Maibach
    We have three SQL Server servers, and each server has a about five or six databases on it. We are in the process of moving these servers to a new SAN and I am working on the best RAID configuration. Currently all of the log files for all of the databases share a RAID array, there is nothing else on this RAID array except for the log files, but all of the databases use this same array for their log files. I have read that it is best to have log files on separate disks. But in our case I am not sure whether it would be best to have one big array with about 8 drives that all the log files are on. Or would it be better to create four two disk arrays and give some of the larger databases their own dedicated disks for their log files?

    Read the article

  • CodePlex Daily Summary for Sunday, May 27, 2012

    CodePlex Daily Summary for Sunday, May 27, 2012Popular ReleasesMS CRM Rich Text box: MS CRM Rich Text box: This release contains the final JavaScript for this plug-in. It is tested and verified. Even if someone is unable to use it, can contact me. Suggestions and bug-notifications are always most welcome.Nivo Slider Web Part SharePoint 2010: Nivo Slider Web Part WSP: Web Part encapsulating nivo slider jquery web part. Download the wsp for one click install. Edit the property of the web part to point to any image library and all done. Web part includes jQuery and nivo jquery library. No configuration is required. This web part is a SharePoint 2010 farm solution. Scope for installation is site collection.iPDC - Free Phasor Data Concentrator: iPDC-v1.3.0: For more info see the iPDC-v1.3.0-Release_Notes document. Changes in iPDC-1.3 : Now iPDC has a centralized file structure. Only a single file for each iPDC and that will store with iPDC-ID. File structure will be explained in release notes document. A setup file for a iPDC will contains the information about: iPDC Server, Connected Source Devices, Connected Destination Devices, and finally configuration frames of sources. Because of this single Setup File previously generated ....Net Code Samples: Code Samples: Code samples (SLNs).Tweetz - Windows Twitter Client Gadget: Tweetz 3.1.5.4: Changed from screen names to regular names in all timelines except search Minor correction in German translation Updated Italian translationSubExtractor: Release 1027: Fix: out-of-memory exception when reading DVDs with very large (over 1GB) cells Fix: AltGr key toggling Italics during OCR Feature: use centered alignment SSA tag for centered text in the upper part of the frame Feature: increased number of subtitle tracks visible in Choose Subtitles step listbox Feature: allow change of palette for entire movieLINQ_Koans: LinqKoans v.02: Cleaned up a bitAutoFixture: 2.11.1: This is an automatically published release created from the latest successful build. Versioning is based on Semantic Versioning. Read more here: http://blog.ploeh.dk/2011/09/06/AutoFixtureGoesContinuousDeliveryWithSemanticVersioning.aspxBlueGem: BlueGem-v1.B Source: Description This is the source of BlueGem -v1.B.XML Schema Documenter: 1.9.4.0: Compatibility fixes for SHFB 1.9.4.0 and Visual Studio 11 Third-Party References Reference Required Used For Sandcastle Help File Builder (version 1.9.4.0) Yes Underlying platform Windows Installer XML (WiX) v3.6 RC0 No Only required to build source code ZXMAK2: Version 2.6.2.1: - fix contended timings for ULA 48/128 early/late - small refactoring for ULA code - fix mistake in timing for CBXX opcodes (thanks to Pegaz for report) - save early/late flag when saving to SZX (works with original ULA's 48/128 only) Use ZXMAK-SPRINTER-2621 package to get emulator with SPRINTER files (select Sprinter model from VM->Settings->Wizard)totalem: version 2012.05.25.1: Beta version speed improvements memory usage improvements smoothness list scrollingJayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.0 RC1 Refresh 2: JayData is a unified data access library for JavaScript developers to query and update data from different sources like webSQL, indexedDB, OData, Facebook or YQL. See it in action in this 6 minutes video: http://www.youtube.com/watch?v=LlJHgj1y0CU RC1 R2 Release highlights Knockout.js integrationUsing the Knockout.js module, your UI can be automatically refreshed when the data model changes, so you can develop the front-end of your data manager app even faster. Querying 1:N relations in W...Christoc's DotNetNuke Module Development Template: 00.00.08 for DNN6: BEFORE USE YOU need to install the MSBuild Community Tasks available from http://msbuildtasks.tigris.org For best results you should configure your development environment as described in this blog post Then read this latest blog post about customizing and using these custom templates. Installation is simple To use this template place the ZIP (not extracted) file in your My Documents\Visual Studio 2010\Templates\ProjectTemplates\Visual C#\Web OR for VB My Documents\Visual Studio 2010\Te...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.53: fix issue #18106, where member operators on numeric literals caused the member part to be duplicated when not minifying numeric literals ADD NEW FEATURE: ability to create source map files! The first mapfile format to be supported is the Script# format. Use the new -map filename switch to create map files when building your sources.myManga: Initial Release - Version 1.0.0.1 - BETA: Leave a Review! This is the initial release of myManga. Please report any bugs. NOTE: There is a bug with MangaReader.net where images are reported 403 Forbidden, this is NOT the fault of myManga but, myManga will through an error and will not download the image.BlackJumboDog: Ver5.6.3: 2012.05.22 Ver5.6.3  (1) HTTP????????、ftp://??????????????????????LogicCircuit: LogicCircuit 2.12.5.22: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionThis release is fixing start up issue.Orchard Project: Orchard 1.4.2: This is a service release to address 1.4 and 1.4.1 bugs. Please read our release notes for Orchard 1.4.2: http://docs.orchardproject.net/Documentation/Orchard-1-4-Release-NotesSharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.0): New fetures:View other users predictions Hide/Show background image (web part property) Installing SharePoint Euro 2012 PredictorSharePoint Euro 2012 Predictor has been developed as a SharePoint Sandbox solution to support SharePoint Online (Office 365) Download the solution havivi.euro2012.wsp from the download page: Downloads Upload this solution to your Site Collection via the solutions area. Click on Activate to make the web parts in the solution available for use in the Site C...New ProjectsAdvStopWatch: This is an wpf project to build a stop watchBlueGem: BlueGem is a simple Rich Text Editor. It also has a system resource monitor.Db4o Extensions: Db4o Extensions is a .NET library to ease database routines like creating composite keys, defining deletion behavior, data validation and transparent persistance.Financial Advisor Toolbox: An attempt to build a set of tools that can be used by a Financial Advisor to help automate some of their daily tasks. The initial release will aim to include "client management" to track clients and their financial profile. ImpresionesJL: This is a great project!K-Dock: K-Dock is a basic WPF library built to allow developers to implement a docking system in their applications. Written in Visual Basic. mouse: ignoreopencv: a personal git mirror for opencvOpenLaunch: OpenLaunch is a new way to make your companies' software more popular. By using a simple framework, developers can integrate their software into OpenLaunch by either their existing project, or by a new project. All help on this project is greatly appreciated, and we are looking for a web developer to create a web interface to the store.Smart Setup: Smart Setup is a PowerShell-based deployment program with using a XML document. It is very flexible with supporting multiple extensions and different configurations for different environment. It's smart and light.UusAhi: Teeme jälle ahju!Win7 Style TreeView: A TreeView with win7 styleWindows Phone 7 Feedback Control: Windows Phone user control for sending feedback directly from the applicationWindows Phone SignalR Helper: Windows Phone SignalR Helper makes it easier for WPDevs to leverage SignalR in making connected real-time Windows Phone applications. Various modes of communication between phone and server will be stubbed out - like real-time Mapping, Chat, Stocks, Game Scores, Object Sync etc.; Re-use or extend to make it work for your own needs. Iterative feature addition planned. Hope this helps!

    Read the article

  • forwardfor information is missing

    - by FAFA
    I use following configuration to load balance https connections, using haproxy 1.4.8. SSL offloading is done by apache. listen ssl_to_waf 192.168.101.54:443 mode tcp balance roundrobin option ssl-hello-chk server wafA 192.168.101.61:444 check listen ssl_from_waf 192.168.101.61:445 balance roundrobin option forwardfor server webA 192.168.101.46:80 check For HTTP requests this works great, requests are distributed to my Apache servers just fine. But for HTTPS request, I lose the "forwardfor" information. I need to save the client IP address. How can I use HAproxy to load balance across a number of SSL servers, allowing those servers to know the client's IP address?

    Read the article

  • Ubuntu server 11.04 recognize only 1 core instead of 4

    - by Kreker
    I searched for other questions and googled a lot but I don't find a solution for solving this problem. Ubuntu Server 11.04 64bit installed on Dell Poweredge with Intel Xeon X5450. He only recognize 1 of the 4 cores I have. Tried to modify the GRUB config but didn't work. IN the machine BIOS I didn't find anything useful. CPU root@darwin:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping : 10 cpu MHz : 2992.180 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 5984.36 clflush size : 64 cache_alignment : 64 address sizes : 38 bits physical, 48 bits virtual power management: GRUB root@darwin:~# cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=2 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="noapic nolapic" #was with acpi=off # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" Complete dmesg Too long, posted on pastebin http://pastebin.com/bsKPBhzu

    Read the article

  • Issues with DHCP over multiple subnets

    - by Dan Monego
    I have a cisco router configured to handle multiple subnets (10.1.10.n, 10.2.10.n, etc), and an ubuntu system serving DHCP to the computers served by the router. After a restart of the DHCP, the systems on the 10.1 subnet are fine, but neither the server or the computers configured on the other subnets can see the router at 10.2.10.1 (or 10.3.10.1, or 10.4.10.1). The router can see itself at 10.2.10.1, however. The change that caused this was restarting the server, so I'm approaching it assuming the configuration error is on that end. Is that the likely issue or is there a different problem that would prevent the machines on the 10.2.10 subnet from resolving DHCP?

    Read the article

  • My KDE very slow in certain operations

    - by Pietro
    I have a problem with my Linux installation. It seems that the KDE code that deals with directory windows is extremely slow (on both Dolphin and Konqueror). This happens both when I click on a directory icon and when I want to open/save a file from many KDE applications. The time the window takes to open can be one minute or more. The same happens when I right click on an icon. Looking at the CPU usage, this is very low (less than 10%). Am I the only one with this problem, or is it well known and maybe already fixed? Consider that I cannot update to a more recent version of OpenSuse. Thank you, Pietro Configuration: Linux version: OpenSuse 11.4 KDE 4.6.0 System: DELL Precision T3500 - Intel Xeon Home directory mounted on a remote drive. <-- could this be the reason?

    Read the article

  • The application attempted to perform an operation not allowed by the security policy

    - by user16521
    I ran this command on the server that has the share of code that my local IIS site set to (Via UNC to that share): http://support.microsoft.com/kb/320268 Drive:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\caspol.exe -m -ag 1 -url "file:////\\computername\sharename\*" FullTrust -exclusive on (obviously I replaced Drive with C, and the actual computername and sharename with the one I'm sharing out). But when I run the ASP.NET site, I am still getting this runtime exception: Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file. Exception Details: System.Security.SecurityException: Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.

    Read the article

  • Fixing dpkg after installation of broken packages? [closed]

    - by Amith KK
    Possible Duplicate: How to remove all associated files and configuration settings of an app installed through 'force architecture' command I installed a broken package, and now apt-get/aptitude is failing with trying to remove it Each time I run a apt operation, this is the message I get: Removing crossplatformui ... ztemtvcdromd: no process found dpkg: error processing crossplatformui (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: crossplatformui E: Sub-process /usr/bin/dpkg returned an error code (1) running sudo apt-get install -f gives me this: amith@amith-desktop:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: crossplatformui 0 upgraded, 0 newly installed, 1 to remove and 1123 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y (Reading database ... 340804 files and directories currently installed.) Removing crossplatformui ... ztemtvcdromd: no process found dpkg: error processing crossplatformui (--remove): subprocess installed post-removal script returned error exit status 1 Errors were encountered while processing: crossplatformui E: Sub-process /usr/bin/dpkg returned an error code (1) How do I fix this?

    Read the article

  • Connection to website interrupted/reset. Why?

    - by Goje87
    When navigating to some websites (like victorsosea.com, citibank.co.in etc.) on Google Chrome, I get a message that the 'connection to www.site.com was interrupted'. If I try on Firefox, it says 'The connection to the server was reset'. This happens no matter what internet connection I use on my laptop. Be it my home internet or office internet. I have tried using Google DNS address as well but that does not seem to solve the problem. I have been facing this problem randomly for some websites. Kindly let me know how I can resolve the issue. My laptop configuration: Windows 7, 64-bit

    Read the article

  • Configuring SQL Server Management Studio to use Windows Integrated Authentication &hellip; from non-

    - by Enrique Lima
    Did you know you can pass your Windows credentials to SQL Server even when working from a workstation that is not joined to a domain? Here is how … From Start, then click All Programs, find Microsoft SQL Server (version 2005 or 2008). Once there, do a right-click on SQL Server Management Studio, then click on Properties Now, follow below to modify the entry for Target: Now the real task (we will be using the runas command) … Modify the shortcut’s target as follows, and remember to replace <domain\user> with the values that correspond to your environment : x64 SQL Server 2008 C:\Windows\System32\runas.exe /user:<domain\user> /netonly "C:\Program Files (x86)\Microsoft SQL Server\100\Tools\binn\VSShell\Common7\IDE\Ssms.exe -nosplash" SQL Server 2005 C:\Windows\System32\runas.exe /user:<domain\user> /netonly "C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\VSShell\Common7\IDE\SqlWb.exe -nosplash" x86 SQL Server 2008 C:\Windows\System32\runas.exe /user:<domain\user> /netonly "C:\Program Files\Microsoft SQL Server\100\Tools\binn\VSShell\Common7\IDE\Ssms.exe -nosplash" SQL Server 2005 C:\Windows\System32\runas.exe /user:<domain\user> /netonly "C:\Program Files\Microsoft SQL Server\90\Tools\binn\VSShell\Common7\IDE\SqlWb.exe -nosplash" Since we modified the shortcut, we will need to fix the icon for SSMS.  We will fix it by pressing the Change Icon… button and pointing to the original “icon” providers. It is the executables for SSMS that hold the icon information, so we need to point to … x64 SQL Server 2008 %ProgramFiles% (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\Ssms.exe SQL Server 2005 C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\VSShell\Common7\IDE\SqlWb.exe x86 SQL Server 2008 %ProgramFiles%\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\Ssms.exe SQL Server 2005 C:\Program Files\Microsoft SQL Server\90\Tools\binn\VSShell\Common7\IDE\SqlWb.exe When you start SSMS from a modified shortcut, you’ll be prompted for your domain password: SSMS will show up stating a different account in the username box, but the parameters from the configuration you are doing above do work and will pass on correctly.

    Read the article

  • Windows replacement for HAProxy

    - by GrayWizardx
    It does not appear that there is a similar question to this already posted, so I will go ahead and ask. I am working on a project that could benefit from having two - four servers handling incoming requests to a backend webservice. The service does not require SSL but does need to support occassional long running processes (upto 120 secs). This project does not at present have the funding to purchase a hardware load balancing solution. I have previously used HAProxy as a solution for this, and found it very simple and straightforward. Is there a similar product for windows (server 2003 or 2008) which provides similar configuration options and runs as a lightweight service? For reasons outside my control I cannot setup a Linux machine (physical or virtual) and so I am looking for behaviour that can be deployed on a windows machine. I can only find Perlbal which appears to fall into this category. So as not to keep this open indifenitely I will give credit to the only answer.

    Read the article

  • keymapping when ssh-ing from mac to linux

    - by Yair
    I'm using Lion to ssh -X to a linux machine and work on some code thats located on it. I open up an editor on the remote machine (usually matlab) and program on it. My problem is that in the linux there is no concept of the command key. So if I want to copy some text from a local window to the editor that runs on the remote, I need to to command-c to copy, and then control-v to paste. This obviously drives me nuts. I was wondering if there is a way to change the keymapping such that the command key will be recognized as a control key on the remote processes. Or is this something I need to change on my local (mac) X configuration?

    Read the article

  • Everytime I click on a link from within Mac, parallels boots up my Windows VM and opens the link there

    - by Christoph
    Everytime I click on a link from within Mac, parallels boots up my Windows VM and opens the link there. That's super annoying and I haven't found a configuration to change it. In the settings of my Windows VM there is an option where to launch the webbrowser. However that seems to only affect links that I open from within my Windows session. UPDATE I just stumbled across this answer: How to disassociate a file type with an application in Mac OS So I disabled "share windows apps with mac" completely. Also this seems to be overly protective it at least does the trick. I think it also deactivates that running windows apps show up in the dock but I don't care that much about that anyway.

    Read the article

  • Configuring Linux Network

    - by Reiler
    Hi I'm working on some software, that runs on a Centos 5.xx installation. I'ts not allowed for our customers to log in to Linux, everything is done from Windows applications, developed by us. So we have build a frontend for the user to configure network setup: Static/DHCP, ip-address, gateway, DNS, Hostname. Right now I let the user enter the information in the Windows app, and then write it on the Linux server like this: Write to /etc/resolv.conf: Nameserver Write to /etc/sysconfig/network: Gateway and Hostname Write to /etc/sysconfig/network-scripts/ifcfg-eth0: Ipaddress, Netmask, Bootproto(DHCP or Static) I also (after some time) found out that I was unable to send mail, unless I wrote in /etc/hosts: 127.0.0.1 Hostname All this seems to work, but is there a better/easier way to do this? Also, I read the network configuration nearly the same way, but if I use DHCP, I miss som information, for instance the Ip-address. I know that I can get some information from the commandline (ifconfig), but I dont get for instance Hostname, Gateway and DNS. Is there a commandline tool that will display this?

    Read the article

  • From a DDD perspective is a report generating service a domain service or an infrastructure service?

    - by Songo
    Let assume we have the following service whose responsibility is to generate Excel reports: class ExcelReportService{ public String generateReport(String fileFormatFilePath, ResultSet data){ ReportFormat reportFormat = new ReportFormat(fileFormatFilePath); ExcelDataFormatterService excelDataFormatterService = new ExcelDataFormatterService(); FormattedData formattedData = excelDataFormatterService.format(data); ExcelFileService excelFileService = new ExcelFileService(); String reportPath= excelFileService.generateReport(reportFormat,formattedData); return reportPath; } } This is pseudo code for the service I want to design where: fileFormatFilePath: path to a configuration file where I'll keep the format of my excel file (headers, column widths, number of columns,..etc) data: the actual records returned from the database. This data can't be used directly coz I might need to make further calculations to the data before inserting them to the excel file. ReportFormat: Value object to hold the report format, has methods like getHeaders(), getColumnWidth(),...etc. ExcelDataFormatterService: a service to hold any logic that need to be applied to the data returned from the database before inserting it to the file. FormattedData: Value object the represents the formatted data to be inserted. ExcelFileService: a wrapper top the 3rd party library that generates the excel file. Now how do you determine whether a service is an infrastructure or domain service? I have the following 3 services here: ExcelReportService, ExcelDataFormatterService and ExcelFileService?

    Read the article

  • OpenOffice Calc: How can I count the number of different items with data pilot?

    - by manu
    Hi all, I have a rather long spreadsheet with historical information of issues solved by some user on a colaborative environment. The spreadsheet have the following (relevant) columns date, week no., project, author id, etc... The week no. is calculated from the date, is basically the year concatenated with the week number within that year; for instance, both 2009-02-18 and 2009-02-20 yield the week number 200908 - the 8th week of year 2009; and 2009-02-23 yields 200909 - the 9th week of year 2009. I need to count how many different users (given by author id) contributed to some project, on a weekly basis. I have setup a data pilot with the week as Row Field, the project as the Column Field, and count-author as the Data Field. However, this counts the author id as different instances. This is not what I need. I need to count how many different users contributed to each project on a weekly basis. I expect to get something like: projects week Project1 Project2 Project3 200901 10 2 200902 2 7 Each inner cell containing how many different users contributed. With the count-author configuration, what I get is how many contributions (total) got the project on that week. Is there a way to tell OpenOffice Calc to do what I want?

    Read the article

  • Partner Training for Oracle Business Intelligence Applications 4-Day Bootcamp

    - by Mike.Hallett(at)Oracle-BI&EPM
    Partners 4-Day training from 15th - 18th October 2012, at Oracle Reading (UK) The Oracle Business Intelligence Applications provide pre-built Operational BI solutions for eBusiness Suite, Peoplesoft, Siebel, JDE and SAP; offering out-of-the-box integration. This FREE for Partners 4-Day training will provide attendees with an in-depth working understanding of the architecture, the technical and the functional content of the Oracle Business Intelligence Applications, whilst also providing an understanding of their installation, configuration and extension. The course will cover the following topics: Overview of Oracle Business Intelligence Applications Oracle BI Applications Fundamentals and Features Configuring BI Applications for Oracle E-Business Suite Understanding BI Applications Architecture Fundamentals of BI Applications Security   REGISTER HERE NOW    (acceptance is subject to availability and your place will be confirmed within two weeks: for help see the Partner Registration Guide) Location: Bray Room, at Oracle Corporation UK Ltd Oracle Parkway Thames Valley Park Reading, Berkshire RG6 1RA 15th - 18th October 2012, 4-Days :  9:30 am – 5:00 pm BST Audience The seminar is aimed at BI Consultants and Implementation Consultants within Oracle's Gold and Platinum Partners. Good understanding of basic data warehousing concepts Hands on experience in Oracle Business Intelligence Enterprise Edition Hands on experience in Informatica Some understanding of  Oracle BI Applications is required (See Sales & Technical Tutorials for OBI, BI-Apps and Hyperion EPM)  Good understanding of any of the following Oracle EBS modules: General Ledger, Accounts Receivables, Accounts Payables Please note that attendees are required to bring a laptop: 4GB RAM Windows 64 bits 80GB free space in Hard drive or External Device CPU Core 2 Duo or Higher Windows 7, Windows XP, Windows 2003 NOT ALLOWED with Windows Vista An Administrator User For more information please contact [email protected].

    Read the article

  • All files on automounted NTFS partition are marked as executable

    - by MHC
    I have set up an NTFS partition to automount via fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda7 during installation UUID=e63fa8a2-432f-4749-b9db-dab328807d04 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda4 during installation UUID=e9ad1bb4-7c1f-4ea9-a6a5-799dfad71c0a /boot ext4 defaults 0 2 # /home was on /dev/sda8 during installation UUID=eda8c755-5448-4de8-b58c-9cb75823c22d /home ext4 defaults 0 2 # swap was on /dev/sda9 during installation UUID=804ff3a7-e5dd-406a-b63c-e8f3c635fbc5 none swap sw 0 0 #Windows-Partition UUID=368CEBC57807FDCD /media/Share ntfs defaults,uid=1000,gid=1000,noexec 0 0 As you can see I have added the noexec bit to the configuration. Why? Because any file I create on or move to the partition is automatically marked as executable. The problem is that there is no way of changing that through nautilus. I cannot uncheck the "Allow executing file as program" option. The noexec option doesn't help, unfortunately. It only prevents nautilus from displaying the "run" or "read" dialog but doesn't change the executable flag. Is there any way I can fix this?

    Read the article

  • How can I tell GoogleBot that a subdirectory is now a subdomain?

    - by cwd
    I had about a million pages of a catalog indexed under a subdirectory, and now that's moved to a subdomain. GoogleBot is crawling each one of them and getting a 301 redirect to the new location. Even though I have set up the redirect rule in the apache sites-enabled configuration file, (i.e. it's early on when apache does the redirect - PHP is not even getting loaded), even though I have done that, the server isn't handling the load well. GoogleBot is making around 5 requests per second, and on top of my normal traffic that is hiking up the CPU for a few hours at a time. I checked in Webmaster Tools and the corresponding documentation for a way to let Google know that the content had been moved from a subdirectory to a subdomain, but with little luck. Basically the most helpful thing I saw said to just send 301 headers for the new location. How can I tell GoogleBot that a subdirectory is now a subdomain? If that is not an option, how can I more efficiently send 301 redirects out for a particular subdomain? I was thinking perhaps the Nginx server but I'm not sure that I can run both Apache and Nginx side by side on port 80 for different subdomains.

    Read the article

  • First requests are painfully slow

    - by winSharp93
    I am running Redmine under IIS using Zoo. Installation was done using the Web Platform Installer and the default configuration has not been touched. However, when using the application, the first requests take very long to complete (sometimes more than one minute). During that time, the ruby.exe causes some CPU load (about 15%). According to the log files, it's mainly the views taking that long to render: Started GET "/redmine/login" for IP at 2012-09-04 09:54:08 +0200 Processing by AccountController#login as HTML Rendered account/login.html.erb within layouts/base (42150.5ms) Completed 200 OK in 43508ms (Views: 43008.5ms | ActiveRecord: 0.0ms) Rendered account/login.html.erb within layouts/base (42435.1ms) Completed 200 OK in 44100ms (Views: 43523.3ms | ActiveRecord: 0.0ms) After the initial delay, further request times are totally acceptable. Any ideas on how to speed up the warmup time?

    Read the article

  • Windows 7 stopped connecting to samba share

    - by Jan
    I have a problem with Windows 7 Home connecting to samba on linux server. It's worked fine for a year and without any changes in configuration or updates it suddenly stopped working. The strangest thing for me is that it stopped working for no reason that I could think of. After a few minutes after trying to connect I get: \\ip is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Other computers in that network (XP machines) connect to samba without any problem. I've tried adding LmCompatibilityLevel as described here: http://www.tomshardware.com/forum/75-63-windows-samba-issue , but it didn't help.

    Read the article

  • Adding MX records to DNS

    - by Teddy
    Let's say I have a computer A which is running postfix, computer B is running tinydns. On domain project.domain.com I'm running httpd server and other server with DNS (tinydns) have entries like =project.domain.com:1.2.3.4:86400 and +project.domain.com:1.2.3.4:86400 where 1.2.3.4 is correct addres for server which runs httpd server. I also have a postfix mail server on 1.2.3.5 which I'd like to work with this domain (project.domain.com). I'm afraid that if I add another alias like +project.domain.com:1.2.3.5:86400 to tinydns configuration - it could break. How that entry should look like? Thank you for any hints.

    Read the article

< Previous Page | 354 355 356 357 358 359 360 361 362 363 364 365  | Next Page >