Search Results

Search found 23946 results on 958 pages for 'remote computer'.

Page 358/958 | < Previous Page | 354 355 356 357 358 359 360 361 362 363 364 365  | Next Page >

• Connecting to a 2.5" laptop drive using USB

  - by user27449

  So I swapped my MBP hard drive with a SSD drive, and I want to connect to my old hard drive. I bought a nextstar 3 external 2.5" drive enclosure that has a USB 2.0 interface. I watched an online video of an older version of the enclosure, and in the video they had a ATA cable to connect to the drive. My enclosure didn't come with anything like that, and there doesn't seem to be a way to connect to my drive (my old drive is a seagate 500gb momentus 7200 RPM). My laptop is about 2 years old now (MBP 17"). The drive doesnt' have pins to connect, it has a wide plug type connector, and a USB connector also (I was able to directly plugin the USB cable to the drive, but didn't connect it to my computer, was just testing thigns out). Is it safe for me to directly connect the cable that came with the enclosure to the drive, and then connect the other end to my computer? Does this single cable provide power and data transfer?

  Read the article

• Is it possible to boot from internet?

  - by Calmarius

  Let's assume the following situation: you have a computer with empty hard disk, and you don't have a CD, floppy, pen drive nearby to boot the computer from. But you have connection to the Internet. Modern computers support network booting using PXE, but I haven't found anything regarding booting via the internet. So, is it possible to use PXE to load an image from the internet and boot it? By having a running system (even a minimal Linux) in RAM, it should be possible to install it on the hard disk, and build up a working system from here.

  Read the article

• Windows 7 - all usb devices go to sleep im idle mode

  - by dvdx

  A strange thing happened after a few updates to the system: Intel rapid storage SSD firmware update Intel Ethernet adapter update GPU Intel update When the computer turns off the screen (after 5 min), an unknown time later, all the USB devices stop working. Sound card Mouse Keybord etc. I can't turn them back on, so I can't wake up the screen or do anything except turn the computer off and back on. I checked my power save profile and all is OK there. I changed in the Device Manager, the Allow USB to sleep in all the hubs. How can I fix this??

  Read the article

• Registry entry for Microsoft SQL Server

  - by Pia

  How can I check from the registry which Microsoft SQL Server(2000,2005 or 2008) is installed in my computer?

  Read the article

• Windows 7 strange boot issue

  - by JL

  Recently I installed an SSD drive, its now my primary boot drive (OCZ Vertex Turbo 60GB). I'm running Win 7 (64bit). Now I am not sure exactly where the fault lies, but when I do a restart from within Windows, the computer will boot and enter into the loading windows portion, however won't progress beyond there. My solution is to manually hit the reset switch, and then when it boots it enters into a windows menu that offers a start up repair or start windows normally. I select start windows normally, and then it boots fine. I am not entirely sure why I can't just restart the computer from windows normally though. The SSD drive works perfectly, and not even sure if it is the cause to this problem. Any ideas on this?

  Read the article

• windows 7 partition disappeared

  - by atoMerz

  I have a VPCF2 with windows 7 installed on it. I was working on my computer when on of my drives (D) disappeared. I can see it in Computer Management>Disk Management and it'd marked as Healthy(Primary Partition). When I right click on it the only options that are enabled are Delete Volume and Help. So I cannot assign a drive letter to it (not even in safe mode). I tried System Restore and it failed. I tried to boot the system using ubuntu tha was installed on my system but that fails too because it was installed on partition D. I'm hopeless. What can I do?

  Read the article

• Issues with new graphics card and drivers

  - by Ortund

  With my onboard graphics card (Intel HD 4000) I was able to use 1680x1050 screen resolution. Using the same screen and an Asus ENGTS250 graphics card with 296.10 drivers installed, I'm not able to use that resolution anymore. Also, I've been having other trouble with driver installations. Using 340.52 or 337.88, I can't boot into Windows 7. I see the Windows Welcome screen and then the screen goes black, loses signal and the computer locks up. I think the drivers issues and the resolution problems go hand-in-hand. I have a feeling I could use a newer driver than 296.10 which would give me access to use the 1680x1050 resolution I want to use, but I'm terrified that if I update or install another driver, that the computer will lock up again. Can anyone recommend a [better] driver for me to use?

  Read the article

• Problems with connecting to wireless network on windows 7

  - by Naveen

  I have a Dell laptop with Windows 7 (Home premium) 64 bit edition installed on it. I use a Wi-Fi router to browse the net. My problem is, I lose the network connection every 10 minutes or so. The network icon on the system tray shows the refresh icon and the status as "identifying network". The network is fine and works fine with my phone. I saw on the net this may be caused if I have enabled IPv6, so I disabled it but still problem persists. When I look at the event log I see the following entries: "Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0xXXXXXXXX. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server." I have also installed VirtualBox(32 bit edition) on the laptop. Does anybody any solution to this?

  Read the article

• Windows Server 2003 Router, Good approach [closed]

  - by jM2.me

  Possible Duplicate: Windows Server 2003 Router with PortForwarding Situation We have Verizon Fios 25/25 Internet Connection, Server acting as a router, and around 12 office computers. Task Portforward port 29000 from office computer. Problem Once I connected wan and lan cables I just had to set static lan ip (on server) and plug in switch with office computers into second nic. Then just right click on wan nic and select share internet connection. All office computers were assigned with an IP address 192.168.0.XXX and Gateway 192.168.0.1 (server). Now I have to open port and portfoward it from computer 192.168.0.190 (static ip, manual). Using this guide http://www.rosscode.com/blog/index.php?title=port_forwarding_in_windows_2003&more=1&c=1&tb=1&pb=1 I faced a problem. Before enabling "RRA" I had to unshare internet connection (wan interface) and was able to setup network. Now how do I setup a network within "RRA" and share internet with private network? Thank you much

  Read the article

• always need administrator password...even my user and password is correct.. i cannot log in

  - by sulit09

  why the computer always need administrator password. when i change all the setting of my computer, all around ..... and when i log in my administrator password... still not working even it is correct....password....and user..... and this pc is connected to domain.. but i try to other pc . to login all also using windows administrator its open..... what is the problem itry run cmd as administrator need administrator password.....again.. , i try to open the properties of network need administrator passpowrd..again how to solve this problem my new pc is windows 7 .

  Read the article

• What's the most reliable (i.e. time-proof) solution for organizing photos?

  - by digitxp

  I pooled together my photos from an old external hard drive, various Picasa Web caches, flickr, flash drives, and an old computer. They're all on my external hard drive, using extremely creative labeling, like allpictures pixix pix2 images familyphotos and so on (hey, I was 7 when I organized them last). My computer's hard drive can die at any minute, and the external is new but who knows what that means? I am planning to start reorganizing these picture, probably by face or time. I have Bridge CS5, Picasa, etc., but which one is the most likely to not crash and burn like my Vista laptop did with a ZIP file filled with pictures of a funeral?

  Read the article

• Unexpected "waiting for localhost"?

  - by Tenaar

  So I ran into something that kind of worried me today. Lately my computer has been kind of slow and I'm dealing with that, but today when I opened Facebook in Google Chrome, I noticed a message in the bottom left corner while it was loading the site that said "Waiting for localhost". It was brief and I managed to notice it because my computer is slower than it used to & it caused Chrome to hang briefly, long enough for me to read it. As I'm quite confident in that Facebook isn't running on my localhost, I'm wondering what could potentially make Chrome wait for localhost while I'm loading webpages from external servers. Is there a malware of some kind that I should be worrying about? Unfortunately I have no other information than this to go on, and I have no idea how to further investigate this, if it generated any logs or whatever. I'd appreciate any help in figuring out this matter!

  Read the article

• How to add network printer remotely without knowing the IP?

  - by Steve

  Assume your friend from over 100km away asked you to add a network printer to his computer since you're so tech savvy. How would you add network printer remotely in this case? You would need: 0. Remote connection to your friend's computer 1. Printer IP and brand/model names 2. Respective drivers downloaded either from manufacturer's website or Windows Update driver Question is, how would you find out the IP address of the printer without bothering your friend too much with technical steps? Since your friend isn't as tech savvy as you - they wouldn't know which buttons to press to get IP address.

  Read the article

• RCA monitor won't display highest resolution when NVidia drivers are installed

  - by novellterminator

  My computer is a dual-monitor setup. It won't display my second monitor's highest res... In fact, it will only display one resolution. Anything higher or lower makes the monitor not show the screen. I've had this problem with this computer, and I upgraded almost all my components (cpu, RAM, mobo, and video card included) and I still have this problem with my new setup. This leads me to believe it's a problem with my monitor and the NVidia driver together. Any thoughts on what can be done? The manufacturer of the monitor doesn't make a driver for this monitor. I used to run Windows Vista and now my new setup runs Windows 7.

  Read the article

• Hard disk failure. Can I recover my "move"d folders?

  - by Doug

  I am in the process of moving all my files from an old laptop to new one. I just moved 11gb of data from my old laptop to a hard drive (external) and then upon moving it out to the new hard drive, the hard drive is getting a CRC (Data Error (Cyclic Redundancy Check). Now I am looking for a solution to recover the files that I moved on my old laptop (not the external). I understand they they are just marked for potential overwriting to free up space. I was getting ready to test out GetDataBack, but it says to install it on a healthy windows and use the recover-needed drive as an external. However, I don't want to turn off my computer without first getting the okay since it is in a "moved" state. Please help! What can I do to recover the Moved files. I haven't touched the computer since it has been moved. What can I use to recover them?

  Read the article

• How do I remove Lenovo Veriface from the login screen?

  - by Xenorose

  I have a Lenovo laptop which came preloaded with Windows 7. Every time I start the computer and get to the Windows log-in screen (where you enter the user password) I get a message about Veriface software giving me the option to use it. I'd like to disable this. I went over the Program's settings and there is nothing that allows you to disable it from loading with Windows. Also, I thought that it might be a service to disable, but I don't see it in the list of services, nor is it in the list of start-up Processes (either in msconfig or in the registry). I'm considering uninstalling it completely, but since it's a part of the lenovo software pack that came with the computer and I do use some of these software, I'm not sure if uninstalling it might also remove wanted things (and uninstalling and reinstalling if needed seems like a mess). Anybody know if there's an easy way to achieve this?

  Read the article

• virtual machines: optimal host os to run Windows XP guest os?

  - by user61132

  My department doesn't have the budget to upgrade my ailing Dell D620 laptop. However, I do have the option to buy my own personal computer, then use my company-issued ISO image to run Windows XP as my guest os using virtualbox or vmware. Therefore, last month, I bought an Acer AX3910-U3012 desktop that had Windows 7 as the host os (and 8G RAM). In short, I was disappointed with the performance while trying to run WinXP as the guest os. (It didn't perform much better than my laptop.) Just wondering what the optimal host os would be for running Windows XP as the guest os? (No, I can't use my company-issued ISO image to build the os for my personal computer.) FWIW, I'm willing to spend up to $2k if it's REALLY worth it, but would prefer to spend no more than $1k. Also, in an effort to cut costs, I'd prefer buy a desktop instead of a laptop. Thanks for any/all feedback.

  Read the article

• Allow Domain Users to install software on their computers

  - by Christa

  How would I go about allowing a 'domain user' to install software on their computer. I have active directory and group policy in place. Is there a setting in group policy that would allow this? I don't really want to make the domain users domain admins as well. There is a way to do this by adding the user to their local admins group under computer management. I need this for about 50 users so that gets to be a long process with that many users. Server: Windows Server 2008 R2 Client Machines: Windows 7

  Read the article

• pscp: how to copy a file from a windows machine to a non-home location on another windows machine?

  - by help

  I want to copy a file from C:\temp on MachineA to C:\final on MachineB. I tried to use the following command, but it gave me an error (permission denied): C:\PROGRA~1\putty\pscp.exe -i C:\PROGRA~1\cwRsync\home\rcadmin\.ssh\id_rsa_private.ppk [email protected]:C:\final\test.txt C:\temp\test.txt It turned out I can only access C:\users\direcpc in my source computer. So if I put the file in C:\users\direcpc\text.txt, then it would work: C:\PROGRA~1\putty\pscp.exe -i C:\PROGRA~1\cwRsync\home\rcadmin\.ssh\id_rsa_private.ppk [email protected]:/test.txt C:\temp\test.txt But I want to access any location on my source computer instead of just my user home directory, is there a way to do this?

  Read the article

• windows 7 (windows-system32-systemproperties.exe n) need programme elevation message

  - by mohammedjas

  hi, i have the issue with windows 7 32-bit professional, since this is a network computer, when i download or install something it was asking for admin password , i gave password, then its shows programme need elevation , after i gone to my computer-properties-advanced tap - again the same message displays as windows-system32-systempropertiesadvanced.exe need programme elevation .this same message showing in all eg: if i click to install something wind/sys32/isyspropertiesins.exe progrmme need elevation , also i was not able to add or change somthing in the computermanagement, user or group , says some error , even i logged in admin also,, please help me out with good soluton ..i am looking forward reply , as soon as possible. regards, mohmmed

  Read the article

• When to run SYSPREP

  - by haxel

  I am attempting to set up a computer using an answer file created by the WAIK and resetting the settings with SYSPREP and had a quick question. We are wanting to use Norton GHOST for our deployments. When do I run the sysprep? I figure it is after I get the computer all set up with the proper updates/software/drivers but I have not been able to find a direct answer to this online. Do i run it after everything is set up and the system is ready to be captured?

  Read the article

• How to disable screens turn off Windows 8.1

  - by Warpzit

  So recently my computer started turning my screen monitors off after a while without activity, if I move the mouse or hit the keyboard they turn back on. I just want them to stay on. My System is windows 8.1 64 bit, I have 2 screens with mini display port and 1 television with hdmi which often is in regular television mode when this issue happens. Now before you jump to conclusions this is what I've tryed: Disabled screen saver Power saving settings to high with following set: Turn of the display: Never Put the computer to sleep: Never Turn off hard disk after: Settings: Never Sleep: Sleep after: Settings: Never Display: Turn off display after: Settings: Never Display: Enable adaptive brightness: Settings: Off Multimedia settings: When sharing media: Settings: Prevent idling to sleep. Any pointers that get me in the right direction will be greatly appreciated.

  Read the article

• Windows 7 fresh install blank screen

  - by Neil Barnwell

  I've just installed Win7 Ultimate to my PC. During the install it reboots a couple of times, but 2nd or 3rd reboot I see the "Starting Windows..." message, but followed by a black screen. No mouse cursor, taskbar, anything. The monitor power light is blue (indicating it has a signal) and it was displaying the setup wizard with no problems whatsoever. Has anyone else witnessed this phenomenon? Many thanks in advance. UPDATE I booted in safe mode, and got a screen saying "Setup is preparing your computer for first use". That's brilliant, although a message box has popped up over that saying: Windows cannot complete instlalation in Safe Mode. To continue installing Windows, restart the computer. So I don't really have the opportunity to do any cleverness with drivers or anything. I guess I could try getting a different version of Win7 (I'm installing from an MSDN DVD).

  Read the article

• How to automount a Truecrypt volume before login in Windows 7?

  - by nonoitall

  I have an external hard drive containing all my documents, and it is encrypted with a password via Truecrypt. I'd like my desktop computer at home to automatically mount the volume prior to my logging in (so that it can be used as my user folder) without asking me for a password. (Yes, the password can be saved in plain text on my desktop's hard drive - that's okay.) For the life of me, I can't figure out a way to do this that actually works though. Tried using the Task Scheduler to schedule a mount when the computer starts up, and it works, but the volume is only accessible by my user account after I log in. (Haven't tried every combination of users/options for the scheduled task, so maybe there's something else there I need to try.) Also tried adding a startup script for my user account that runs on login, which evidently is too late to set up the user's profile folder. Anybody ever successfully achieve this or something like it?

  Read the article

• Discrete Math and Computing Course

  - by ShrimpCrackers

  I was recently admitted into a Computing and Software Systems program (basically software engineering) and one of the first courses I'll be taking is called Mathematical Principles of Computing. The course description: "Integrating mathematical principles with detailed instruction in computer programming. Explores mathematical reasoning and discrete structures through object-oriented programming. Includes algorithm analysis, basic abstract data types, and data structures." I'm not a fan of math, but I've been doing well in all my math classes mostly A's and B's ever since I started two years ago, and I've been doing math every quarter - never took a quarter without math - so I've been doing it all in sequence without gaps. However, I'm worried about this class. I've read briefly on what discrete math is and from what my advisor told me, its connection with computer science is that it has alot to do with proving algorithms. One thing that my instructors briefly touched on and never went into detail was proving algorithms, and when I tried, I just wasn't very good at mathematical induction. It's one of the things that I ignored every time it showed up in a homework problem (usually in Calculus III which I'm finishing up right now). Questions: 1. What can I expect from this class? 2. How can I prepare myself for this class? 3. Other tips? Thank you.

  Read the article

< Previous Page | 354 355 356 357 358 359 360 361 362 363 364 365  | Next Page >