Search Results

Search found 15520 results on 621 pages for 'block element'.

Page 359/621 | < Previous Page | 355 356 357 358 359 360 361 362 363 364 365 366  | Next Page >

• routing weirdness - traceroute 'vanishes' en route

  - by The Journeyman geek

  I'm attempting to set up one of my boxes as a server (again), but i'm having some odd connection issues- the box itself connects fine to the internet, but trying to connect to my external ip address seems to result in the trace getting 'lost' partway. http://pastebin.com/HCQAGbvn - this is a traceroute from another system that's connected to another ISP - starhub is my own one, while i have another system that i have access to on singtel. I'm wondering if my ISP is messing around with routing, or is something very odd going on. As you note, the traceroute dosen't reach me, but if it helps, i use a dd-wrt router. edit: Facepalmishly, turning the firewall on my router on and off fixed it. I don't get why it dropped off at different ip addresses each time, or why the router set it self to block.. everything, or why it affected the ipv6 tunnel as well.

  Read the article

• Is it normal for a SAS drive to have a few bad blocks, or should I replace my drive ASAP?

  - by Nate

  I have a drive—part of a RAID 1 mirror—that has two bad blocks. Adaptec Storage Manger e-mailed me when it detected the blocks. It shows 4 medium errors for that drive, but state is still “optimal”. This is my first time using Adaptec RAID controllers. I don’t know if an occasional bad block is normal, or if I should immediately replace that drive. Update: The drive failed later the same day! The disk subsystem is: Adaptec 6405 with ZMM (2) Seagate near-line SAS drives (ST31000424SS) The other drive hasn’t reported any bad blocks yet. I am running a consistency check.

  Read the article

• how to clone a physical "individual partition" vmdk into a "local" (file-based) vmdk?

  - by BJH

  Hello. I have a physical disk with a small (60GB) partition containing my guest OS. The physical disk also contains a large (240GB) block of unpartitioned space. My vmdk is defined as a physical "individual partition". I want to convert the source physical "individual partition" vmdk into a local (file-based) vmdk. The command - vmware-vdiskmanager -r sourcevmdk targetvmdk -t 2 creates a 300GB vmdk that includes both the desired 60GB "individual partition" and the 240GB of useless unpartitioned space ! How can I create a local vmdk with just the individual partition?

  Read the article

• How to allow a single domain name with iptables

  - by Claw

  I am looking for a way to make iptables only accept requests for my domain name and reject the others. Lately I misconfigured my apache proxy, it is now fixed, but I keep receiving a load of requests looking like that : xxxx.xx:80 142.54.184.226 - - [12/Sep/2012:15:25:14 +0200] "GET http://ad.bharatstudent.com/st?ad_type=iframe&ad_size=700x300&section=3011105&pub_url=${PUB_URL} HTTP/1.0" 200 4985 "http://www.gethealthbank.com/category/medicine/" "Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 4.0)" xxxx.xx:80 199.116.113.149 - - [12/Sep/2012:15:25:14 +0200] "GET http://mobile1.login.vip.ird.yahoo.com/config/pwtoken_get?login=heaven_12_&src=ntverifyint&passwd=7698ca276acaf6070487899ad2ee2cb9&challenge=wTBYIo2AEdMFr6LtdyQZPqYw9FS9&md5=1 HTTP/1.0" 200 425 "-" "MobileRunner-J2ME" which I would like to block. How can I manage this ?

  Read the article

• Log with iptalbes which user is delivering email to port 25

  - by Maus

  Because we got blacklisted on CBL I set up the following firewall rules with iptables: #!/bin/bash iptables -A OUTPUT -d 127.0.0.1 -p tcp -m tcp --dport 25 -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --gid-owner mail -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --uid-owner root -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --uid-owner Debian-exim -j ACCEPT iptables -A OUTPUT -p tcp -m limit --limit 15/minute -m tcp --dport 25 -j LOG --log-prefix "LOCAL_DROPPED_SPAM" iptables -A OUTPUT -p tcp -m tcp --dport 25 -j REJECT --reject-with icmp-port-unreachable I'm not able to connect to port 25 from localhost with another user than root or a mail group member - So it seems to work. Still some questions remain: How effective do you rate this rule-set to prevent spam coming from bad PHP-Scripts hosted on the server? Is there a way to block port 25 and 587 within the same statement? Is the usage of /usr/sbin/sendmail also limited or blocked by this rule-set? Is there a way to log the username of all other attempts which try to deliver stuff to port 25?

  Read the article

• Issues connecting to a pix 501 via console cable

  - by Bourne

  Have a pix 501 that was set up to do filtering and I was working on setting the vpn up when I lost ssh connectivity. Looking at the front, all 4 lan lights blink intensely green but in a very repetitive pattern. The funny thing is there are only 3 devices connected to the 4 ports so that's the first element that doesn't look right to me. Console cable light doesn't turn on when cable is plugged in and have tried rebooting it many many times to see the bootup sequence with no result. Also, I cannot connect to it via pdm or console but the traffic is permitted through. Are there any additional troubleshooting steps I could do or should I count it as dead? Thank you.

  Read the article

• SVN Active Directory authentication with ProxyPass redirect in the mix

  - by Jason B. Standing

  We have a BitNami SVN stack running on a Windows machine which holds our SVN repository. It's set up to authenticate against our AD server and uses authz to control rights. Everything works perfectly if Tortoise points at http://[machine name]/svn However - we need to be able to access it from http://[domain]/svn. The domain name points to a linux environment that we're decommissioning, but until we do, other systems on that box prevent us from just re-pointing the domain record. Currently, we've got a ProxyPass record on the linux machine to forward requests through to http://[machine name]/svn - it seems to work fine, and the endpoint machine asks for credentials, then authenticates: but when that happens, the access attempt is logged as coming from the linux box, rather than from the user who has authenticated. It's almost like some element of the credentials aren't being passed through to the endpoint machine. Has anyone done this before, or is there other info I can give to try to make sense of this problem, and figure out a way to solve it? Thankyou!

  Read the article

• HTTPS redirects in nginx

  - by CadentOrange

  I'm trying to redirect all HTTP traffic to HTTPS. The web server I'm using is nginx. This is the server block I'm using to do the redirect. server { listen 80; rewrite ^ https://$server_name$request_uri? permanent; } This successfully redirects URLs like http://localhost to https://localhost. However, for URLs like http://localhost/table/ I get redirected to https://table which is incorrect. I would like it to re-direct to https://localhost/table/ Any help would be much appreciated. Update: It seems that the rewrite scheme has a problem with trailing slashes. For example, http://localhost/table gets correctly redirected but http://localhost/table/ does not.

  Read the article

• Volume expanded in Volume Group, old disk reduced but still in use in system

  - by Yurij73

  Tryed to add a new hard sdb (not formated) to my virtualbox Centos. Successfully extended an existing vg_localhost to /dev/sdb/ # lvdisplay --- Logical volume --- LV Path /dev/vg_localhost/lv_root LV Name lv_root VG Name vg_localhost LV UUID DkYX7D-DMud-vLaI-tfnz-xIJJ-VzHz-bRp3tO LV Write Access read/write LV Creation host, time localhost.centos, 2012-12-17 LV Status available # open 1 LV Size 18,03 GiB Current LE 4615 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 20G 0 disk +-vg_localhost-lv_root (dm-0) 253:0 0 18G 0 lvm / +-vg_localhost-lv_swap (dm-1) 253:1 0 2G 0 lvm [SWAP] sda 8:0 0 9G 0 disk +-sda1 8:1 0 500M 0 part /boot +-sda2 8:2 0 8,5G 0 part sr0 11:0 1 1024M 0 rom df -h /dev/mapper/vg_localhost-lv_root 6,5G 6,2G 256M 97% / tmpfs 499M 200K 499M 1% /dev/shm /dev/sda1 485M 78M 382M 17% /boot it still old sda in use, what i have to do further?

  Read the article

• Is it necessary to have firewalls rules between trusted nodes communicating on their backend interfaces?

  - by Tom

  I have 6 nodes that have internet access on eth1 and private access to one another on eth0. Currently I have firewall rules for eth0, for things like memcached and NFS. Is this necessary? It's a real headache as NFS for example communicates on loads of different ports, and I recently introduced glusterfs which needs more still. Is the headache of figuring out what backend ports to unblock worth the security enhancement? I should mention that I will of course still have a firewall rule on eth0 to block servers owned by others in the same datacenter. Thanks

  Read the article

• send mail via smtp on debian 6?

  - by acidzombie24

  i followed this tutorial http://library.linode.com/email/exim/send-only-mta-debian-6-squeeze?format=print When i got to the end, i sent the email to [email protected]. I didnt receive it. I didnt get spam either, i got nothing. I also didnt get an error message on the console. How do i properly sent up a smtp server and send an email from it? I'll not i am testing this on my VM on my local computer. My ISP doesnt block any traffic whatsoever (which is one reason why i use them) so... what can i do? i also tried this tutorial

  Read the article

• Enlarge partition on SD card

  - by chenwj

  I have followed Cloning an SD card onto a larger SD card to clone a 2G SD card to a 32G SD card, and the file system is ext4. However, on the 32G SD card I only can see 2G space available. Is there a way to maximize it out? Here is the output of fdisk: Command (m for help): p Disk /dev/sdb: 32.0 GB, 32026656768 bytes 64 heads, 32 sectors/track, 30543 cylinders, total 62552064 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e015a Device Boot Start End Blocks Id System /dev/sdb1 * 32 147455 73712 c W95 FAT32 (LBA) /dev/sdb2 147456 3994623 1923584 83 Linux I want to make /dev/sdb2 use up the remaining space. I try resize2fs /dev/sdb after dd, but get message below: $ sudo resize2fs /dev/sdb resize2fs 1.42 (29-Nov-2011) resize2fs: Bad magic number in super-block while trying to open /dev/sdb Couldn't find valid filesystem superblock. Any idea on what I am doing wrong? Thanks.

  Read the article

• Can't set up Usermin correctly to allow users to login outside of local network, what am I missing?

  - by thecraic

  I'm fairly new at creating a server, but the biggest problem I am currently having at the moment is getting Usermin set up to be accessible from outside the LAN. I talked to other people that use it and was told that all I need to do is type the url:20000 to access the login screen, but that doesn't work. I have also tried the ip:20000 and that doesn't lead to anything. Instead I get the error message: Error - Bad Request This web server is running in SSL mode. Try the URL https://hostname:10000/ instead. (where hostname is my server's hostname) I know it must be a configuration issue, but I have checked all my settings and as far as I can tell I don't have the ports blocked anywhere. I have the correct ports forwarded on my router and my server firewall doesn't have the port block either. Is there anything I am missing? Any help would be appreciated and I will add more information upon request. Thank You.

  Read the article

• Creating bootable Fedora USB with persistent storage

  - by dooffas

  I am attempting to burn the full Fedora 19 x86_64 DVD iso to a USB drive and have a separate partition on it for a kickstart file / other media that will be installed in the kickstart process. With the Ubuntu server 12 iso, you can simply dd the iso to the usb drive: dd if=/path/to/iso of=/dev/sdb Once the iso has been burnt, open gparted and create a ext2 parition in the allocated space. However, this does not seem to work with the Fedora ISO. When loading the USB drive in gparted I get a warning and an error: Warning: The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes. Error: The partition's data region doesn't occupy the entire partition. Ignoring both of these errors allows gparted to load the usb drive, however it shows a blank drive with no partition table. Has anyone come across this before? From what I have found, it may have something to do with the fact that Fedora use isohybrid.

  Read the article

• A space-efficient filesystem for grow-as-needed virtual disks ?

  - by Steve Schnepp

  A common practice is to use non-preallocated virtual disks. Since they only grow as needed, it makes them perfect for fast backup, overallocation and creation speed. Since file systems are usually based on physical disks they have the tendency to use the whole area available1 in order to increase the speed2 or reliability3. I'm searching a filesystem that does the exact opposite : try to touch the minimum blocks need by an aggressive block reuse. I would happily trade some performance for space usage. There is already a similar question, but it is rather general. I have very specific goal : space-efficiency. 1. Like page caching uses all the free physical memory 2. Canonical example : online defragmentation 3. Canonical example : snapshotting

  Read the article

• Replicate a big, dense Windows volume over a WAN -- too big for DFS-R

  - by Jesse

  I've got a server with a LOT of small files -- many millions files, and over 1.5 TB of data. I need a decent backup strategy. Any filesystem-based backup takes too long -- just enumerating which files need to be copied takes a day. Acronis can do a disk image in 24 hours, but fails when it tries to do a differential backup the next day. DFS-R won't replicate a volume with this many files. I'm starting to look at Double Take, which seems to be able to do continuous replication. Are there other solutions that can do continuous replication at a block or sector level -- not file-by-file over a WAN?

  Read the article

• blocking port 80 via iptables

  - by JoyIan Yee-Hernandez

  I'm having problems with iptables. I am trying to block port 80 from the outside, basically plan is we just need to Tunnel via SSH then we can get on the GUI etc. on a server I have this in my rule: Chain OUTPUT (policy ACCEPT 28145 packets, 14M bytes) pkts bytes target prot opt in out source destination 0 0 DROP tcp -- * eth1 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW,ESTABLISHED And Chain INPUT (policy DROP 41 packets, 6041 bytes) 0 0 DROP tcp -- eth1 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW,ESTABLISHED Any guys wanna share some insights?

  Read the article

• sharepoint 3.0 site restore/import trouble...

  - by Trondh

  Hi, We have some old sharepoint data (from a WSS 3.0 SP1 or SP2 install), that I need to restore. Problem is: This is a time management site, and one of the fields automatically pics up the user name of the user that enters data, and this is used to keep track of who worked when. Now, when I import this into my temporary sharepoint 3.0 server, these fields are blanked, and the creator of the element is replaced by my admin user (the account that ran the import job). So, to the question: Is there any way at all to grab hold of these data before the sharepoint import job "destroys" them? I'm using stsadm -o import. I don't care if I have to pick the database itself apart manually, I just need to know if it's possible to get hold of these fields with data intact from my export files... (Backup you say? It was deleted loong ago. This sharepoint export is all we have...)

  Read the article

• SFTP over double server hop

  - by josh.trow

  I'm trying to work out a method to allow me to access files on an SFTP server than I cannot access from my local machine. Currently, I have to SSH to a remote server (it is in a certain IP block that the final SFTP server will accept from), then from there SFTP to the destination server. From there, I get the files I am interested in, thereby dropping them onto the middleman server, from which I can get the files either over a Samba share or with a direct scp. I also work in the reverse, where I drop the files onto the middleman, SSH to it then SFTP to the destination and put them into the appropriate folders. My goal is to shorten this. The unfortunate restrictions are that my machine is Windows (I use KiTTy and/or Cygwin) and I cannot modify the middleman server (or destination server) in any way. I am willing to use command line or GUI programs so long as it works and is free. Any ideas?

  Read the article

• Pressing 'Enter' doesn't really work in Firefox

  - by inkedmn

  When I'm typing just about anywhere in Firefox on OSX and press enter, it simply doesn't do anything. This includes typing in a textarea element (which should take the cursor to the next line), in a search form (which should submit the form). I'm typing this very question in Firefox right now and I'm unable to advance the cursor to the beginning of the next line. I have no clue what I did to make this happen, but it's kinda driving me insane. This is Firefox 3.6.3 under Mac OS X 10.6. Thanks!

  Read the article

• Web Content Filtering for Windows Clients

  - by djoyce

  I'm working with a small business to solve a bunch of problems. One is their Windows 7 POS registers need to have web access restricted to only three remote support sites, but the back office machine needs an unfiltered connection. I'd like something I can install and configure on the few registers to block all but those few sites. In a perfect world this would restrict the normal register user, but the admin user would not be filtered. Free is best, if it works, but a small fee would be alright too. Microsoft's Family Safety filter is close, but requires a Windows Live account, which isn't ideal, but may be alright. Anyone use this in a small business environment? I'd prefer something easily managed at the local machines. K9 Web Protection is interesting and I'm going to look into it more. Are there other options? Seems like someone would have made something simple like this as an open source project, but maybe not.

  Read the article

• Restart an in-use NFS server without interruption (within timeout)

  - by zebediah49

  I have a bunch of compute clients working on jobs, saving output data to a NAS machine. All machines are centos 6.2. They mount it via automount NFS, with a timeout of 1200 (default config). The NAS machine needs to be restarted. If I can restart the machine within that 1200s (20 minute) window, will the clients just block on IO until it comes back up? A minor interruption (pause) in service is ok, as long as it doesn't cause the running processes to error out. If necessary I could loop through and SIGSTOP all job processes, restart and resume them -- I just don't want to break the open file handles. How can I run a restart like this without killing processes with open files?

  Read the article

• Mimicking Google's Persistent Disks -- Is this a logical FreeBSD disaster recovery strategy?

  - by Casey Jordan

  I am looking into FreeBSD to provide a more comprehensive backup and disaster recovery strategy for database servers. Ideally I want to mimic what google is doing with "Persistent disks" https://developers.google.com/compute/docs/disks#snapshots I am hoping someone who knows more about FreeBSD can validate these ideas/questions: I have read that FreeBSD can take instant disk snapshots, therefore if our databases trigger a consistent state (Block all writes, and flush buffers to disk), I would assume I could take snapshots every hour without service interruption for more than a few seconds. Is this true? Is there a way to take snapshots and back them up offsite easily? Can this be done incrementally as to save how much disk space is actually used? If a rollback needed to be done, how long does this typically take? Is a rollback also instantaneous? Thanks!

  Read the article

• How do I restore the Gnome Panel volume control in Ubuntu 10.04?

  - by Neil

  I use alsa, and I don't have a volume control applet on my Gnome Panel. When I right click and select "add to panel", there is nothing that has to do with "sound", "audio" or "volume" in the list, and the "Indicator Applet" or "Indicator Applet Session" things have no volume controls, or properties that would let you enable any sort of volume control. How can I get a volume control in Ubuntu, so I don't have to run aumix in a terminal or something? I've been using Linux since Redhat 5, it's beyond me why these sorts of problems are still around. Someone should just put a damn "Volume Control" element in the list of things to add to the panel, even if it doesn't work, perhaps showing an error message.

  Read the article

• Hadoop Rolling Small files

  - by Arenstar

  I am running Hadoop on a project and need a suggestion. Generally by default Hadoop has a "block size" of around 64mb.. There is also a suggestion to not use many/small files.. I am currently having very very very small files being put into HDFS due to the application design of flume.. The problem is, that Hadoop <= 0.20 cannot append to files, whereby i have too many files for my map-reduce to function efficiently.. There must be a correct way to simply roll/merge roughly 100 files into one.. Therefore Hadoop is effectively reading 1 large file instead of 10 Any Suggestions??

  Read the article

< Previous Page | 355 356 357 358 359 360 361 362 363 364 365 366  | Next Page >