Search Results

Search found 19667 results on 787 pages for 'missing template'.

Page 359/787 | < Previous Page | 355 356 357 358 359 360 361 362 363 364 365 366  | Next Page >

• How to configure nagios realtime SMS alert

  - by Jerry

  I have configured nagios SMS alert and it takes around one minute to send notification. I want to get SMS notification withing one/two second(s) after system/service failure. I could not find any way to send sms alert in a second. Can anybody help me??? Update Wednesday, 29 August 9:26:43 a.m GMT define host{ use generic-host ; Name of host template to use host_name localhost alias localhost address x.x.x.187 check_command check-host-alive normal_check_interval 1 max_check_attempts 1 retry_interval 1 notification_interval 120 notification_period 24x7 notification_options d,r contact_groups admins }

  Read the article

• How do I use an SSH public key from a remote machine?

  - by kubi

  Setup The public keys are set up on a Macbook. I can do a passwordless push to github and a server (iMac) on the local network. The Problem I know the keys are partially setup correctly, because I everything works if I'm sitting at the Macbook. What doesn't work is when I SSH into the Macbook remotely and attempt to push to github or to the iMac server. I'm prompted to input my SSH key passphrase. What am I missing to enable pushing to github from the Macbook while logged in remotely from the iMac?

  Read the article

• How to force my laptop to use the discrete GPU?

  - by Anton Roth

  My laptop (Asus X7BSV) is stuck using only the integrated GPU. It has a nVidia GT540M as well, but I cannot get it to work. I am using a Windows 7 x64 with latest drivers. This occurred after I attached an external USB monitor I need for work, and since then I cannot swap back to the nVidia GPU (dxdiag for example says that the primary GPU is the Intel integrated one). Asus support asked me to completely reinstall the system, but that is something I do not want to do. I checked the BIOS, there is no option as to what GPU to use. The nVidia card itself is working, since I can use CUDA on it, and it worked with a Ubuntu Live CD. In the nVidia software management I tried setting it to global setting, high performance GPU (nVidia), but that had no impact. What am I missing here? I did uninstall/delete all drivers and software related to the external monitor, but that did not help.

  Read the article

• Cascading switches: uplink to uplink?

  - by wuckachucka

  I'm a bit confused as to why I haven't seen any references online to using Switch A's uplink port (1Gbps, 24-port 10/100) to connect to Switch B's uplink port: everything I've seen -- including documentation, forums, articles, etc. -- has Switch A's uplink port going to one of Switch B's 10/100 access ports. As I understand it, the Uplink port (besides greater speed normally) is no different than another port except that it's "internally crossed-over" so that you can use a straight cable with it. I've also seen documentation on using the uplink port to connect a switch to a gateway router, or even a server, as it provides greater bandwidth than the access ports, but yet not sure why nobody seems to be cross-uplinking, even when there's 2 uplink ports available on some higher-end switches. Switch in question is Linksys SRW224P (x2). Am I missing something?

  Read the article

• Updating a script currently being ran by Task Scheduler on Windows

  - by orangechicken

  I have a scheduled task that runs a script on a ahem schedule ahem that updates a local git repo. This script is a file in this local git repo. Currently, what I'm seeing is that the script is ran, git complains that permissions are denied to write to file which actually results in the script being deleted! The next time the scheduled task runs the script file is now missing! How can I ensure that when I pull changes to this script from the repo that the file is actually updated?

  Read the article

• RabbitMQ message broker unable to open unused port 61613

  - by mjn

  On a Windows Vista system, RabbitMQ fails to open port 61613 which is not used (as netstat and TCPView show). The server log indicates that it is possible to bind port 5672, but the next lines show the problem with port 61613. I have cleared all firewall settings and rebooted. Several times in the past this helped to solve the problem. But as the problem frequently reappears, I would like to know if there is somthing I am missing to solve its root cause. =INFO REPORT==== 29-Jun-2013::12:09:16 === started TCP Listener on [::]:5672 =INFO REPORT==== 29-Jun-2013::12:09:16 === started TCP Listener on 0.0.0.0:5672 =INFO REPORT==== 29-Jun-2013::12:09:16 === rabbit_stomp: default user 'guest' enabled =INFO REPORT==== 29-Jun-2013::12:09:16 === started STOMP TCP Listener on [::]:61613 =ERROR REPORT==== 29-Jun-2013::12:09:16 === failed to start STOMP TCP Listener on 0.0.0.0:61613 - eacces (permission denied) =INFO REPORT==== 29-Jun-2013::12:09:16 === stopped STOMP TCP Listener on [::]:61613

  Read the article

• Problem in Installing Wordpress

  - by Hajloo

  I try to install Wordpress in a Windows Client with WebPI which provided by Microsoft. I had tostop installation process 3 time and installing PHP and mysql Extention manually. but everytime I continue setup by WebPi andfinally it show me a success message. But when I try to see installed wordpress in my client I see this Your PHP installation appears to be missing the MySQL extension which is required by WordPress. I asked it in StackOverFlow here but I couln't get the right answer. I install everything in **C:\Program files\** so these are the location C:\Program Files\MySQL\MySQL Server 5.1 C:\Program Files\Php C:\Program Files\ext mysql root password: admin wordpress database : wordpress wordpress database password : 123 here is my php.ini

  Read the article

• Windows 7 Bluetooth Configuration

  - by ahsteele

  I have Bluetooth installed in my laptop. The Bluetooth is enabled according to the status light. However, I do not see Bluetooth listed in device manager or have a control panel option for it. A scan for new hardware doesn't turn up Bluetooth. Nor are any devices listed with a Yellow Exclamation Point. I do have three USB Hubs Listed as "Generic USB Hub." There is no Bluetooth icon in the notification area and Bluetooth is not listed under Devices and Printers. What am I missing?

  Read the article

• Is there an audio recording application/tool that has Tivo-like functionality?

  - by Bob

  I do a lot of live speech recording that requires me to quickly jump back and then transcribe a particular piece of the audio, then go back to recording again, while still maintaining the full audio file. So Far I've done this by splitting the audio and running one line to a recorder (for the whole audio), and one to my computer. Then I use something like Audacity to record, and then stop/go back whenever I hear something worth transcribing. This requires me to stop the recording, then start it up again and I end up missing chunks of the speech I'm listening to. Is there a tool that would let me rewind, then listen again and continue listening at a buffered distance from the audio recording, the way Tivo does with television shows?

  Read the article

• DB auto failover in c# does not work when the principal server physically goes offline

  - by user62521

  I'm setting up DB auto failover in C# with SQL Server 2008 and I have a 'high safety with automatic failover mirror' using a witness setup and my connection string looks like "Server=tcp:DC01; Failover Partner=tcp:DC02; database=dbname; uid=sewebsite;pwd=somerndpwd;Connect Timeout=10;Pooling=True;" During testing, when I turn off the SQL Server service on the principal server the auto failover works like a charm, but if I take the principal server offline (by shutting down the server or killing the network card) auto failover does not work and my website just times out. I found this article where the second last post suggests that its because we are using named pipes which does not work when the principal goes offline, but we force TCP in our connection string. What am I missing to get this DB auto failover working?

  Read the article

• Is it possible to backup an SQL Database hosted on an Azure VM, to our internal DPM2012?

  - by Florent Courtay

  I've got an SQL database on an azure VM (non domain) that i'd like to backup to our internal DPM 2012 server. I've installed the DPM agent on the Azure VM, setup DCOM to use only the ports 5000 to 5025 on both the VM and the DPM server, created the 135, 5000-5025, 5718 5719 endpoints on azure and on the VM's firewall. When trying to add this agent to the DPM server, I end up with an error, "Unable to contact the protection Agent on server .cloudapp.net" I know there is some sort of connection between them, as using a wrong password gives me an Invalid Credentials error. The error seems to be DCOM related : When trying to connect to the Azure VM from the DPM server using VBEMTest, i get an Error "0x800706ba The RPC server is unavailable", but access is deneid when using wrong credentials ) What am i missing ? Has someone been able to achieve this kind of setup ? Thanks for your help !

  Read the article

• Access - Force Form Refresh on New Record

  - by gamerzfuse

  Let me set the stage here a bit: I have an Access project with various buttons, triggers, macros, etc. I needed an Appointment Date field to only show when the button APPOINTMENT MADE is toggled ON. This works great. The problem arises when you submit a form with the APPOINTMENT MADE toggled. Once the record is inserted, the Access file clears all fields, but leaves the Appointment Date enabled, when it should be disabled by default. I have tried the Current, Load, Before Insert, After Insert and many other options on the FORM properties. Am I missing a simple way to force a refresh so the field goes back to it's default DISABLED? Thanks in advance!

  Read the article

• How do I keep multiple copies of Outlook in sync when using RPC over HTTP?

  - by Don

  I use Outlook 2007 at work with our Exchange 2003 server. I just setup my home system with Outlook 2007 so that I could use the RPC over HTTP to access Exchange without having to use a VPN. It works fine. I can get mail, send mail, etc. What it doesn't seem to be doing is staying in sync. For example, I read a few messages at home, moved them into different folders from the Inbox, etc. That all seemed fine. When I login to my work machine and look at the copy of Outlook there, the mail is still unread and nothing has been moved. Am I missing something simple here? I would have to assume that my home machine should be telling Exchange where these messages belong and that they've been read. Both machines are running Windows 7, if that matters. Ideas?

  Read the article

• Buying Video Card for 1600x900 monitor?

  - by Yar

  I just bought a monitor for a relative's computer (Intel 82915G chipset) which should produce 1600x900. Though the current card can produce 1600x1200, there's no way (that I know of) to force it to produce 1600x900. Assuming buying a card would be a solution, how would one find a cheap video card that can do 1600x900? They don't seem to list the modes in most ads. If I'm missing something in Windows, please let me know, but I've looked around quite a bit and tried many things (including unsupported resolutions, etc).

  Read the article

• Vim - dynamic list of open buffers in a window

  - by asfallows

  I've investigated a few ways to maintain a list of open buffers in Vim, and some of them are very good, but none of them seem to behave the way I'd like. It's very possible that nothing like what I want exists, and it can't hurt to ask. I've been using NERDTree in GVim, and I like the idea of putting the information in a slender left-hand window. I've put together a handy diagram for how I'd like my environment to look: |--------|---------------------------------------| | | | | | | |NERDTree| Windows | | | | | | | | | | |--------| | | | | | | | | List | | | of | | | Open | | | Buffers| | | | | | | | |--------|---------------------------------------| So my question is: Is there a vim-native or plugin-enabled way to maintain a list of currently open buffers and select/edit/close from that list, inside a window similar to NERDTree? I understand that this approach may be incongruous with the Vim way of doing things, and if you feel like I'm missing something about how to manage multiple files in a Vim session, please leave a comment with suggestions!

  Read the article

• Installing Collective Access

  - by Michele

  I am VERY new to installing any type of server program and to running any opensource type software in general. I am running Windows Server 2008R2. I want to install Collective Access to run locally only on my Intranet at home. So my host is localhost I sucessfully installed PHP and MYSQL. I installed CA in this directory C:/inetpub/wwwroot/collectiveaccess. 1st. I do not want to send mail through collective access. Will it install without all the email information? Can I comment those requirements out in the global config and setup.php file? 2nd I am getting the error. Configuration file is missing for hostname 'localhost' this is what I have in the set up file: define("CA_WEB_ROOT_DIR", "c:inetpub/wwwroot"); define("CA_URL_ROOT", "/collectiveaccess"); define("CA_SITE_HOSTNAME", "localhost"); define("CA_DB_HOST", 'localhost');

  Read the article

• Error loading operating system WinXP Pro

  - by Jakesan

  So im getting the error "Error loading operating system" when the computer tries to boot to a fresh install of WinXP Pro. To get to this point, I: Shrunk the only partition with Gparted to 33GB Copied the partition to the end of the 200GB drive Enlarged the first one to fill the space Formatted the first partition to NTFS Set the first partition to boot, tagged the latter to hidden, removed boot flag This was done all under Hiren's BootCD. Now this is where it goes down the drain. I installed XP Pro SP1a from its CD, and chose to quick format the partition. Now after the OS was installed, I can't start XP without using the default menu action from Hiren's BootCD. All I am greeted with is the "error loading operating system" message. I tried to use the XP recovery to fixboot, fixmbr and bootcfg /rebuild (dont remember if the command was like this, anyway the 3 suggested commands). This did nothing. What am I missing here?

  Read the article

• Copssh, how to add users?

  - by Ken

  I installed copssh on Windows Vista (64-bit) here, and the installation seemed to go fine. It requires you to explicitly add users to log in, which is fine, so I opened the COPSSH Control Panel (really just an app), went to the Users tab, clicked Add, Forward, and the "User:" popup is empty. The "Domain:" popup has exactly one entry: my computer name. The "Documentation" shortcut in the start menu group is broken, but I found the folder it's supposed to point to, and I only see docs for command-line tools (which I'll investigate next). Is there something I'm missing? Is the COPSSH Control Panel just plain broken?

  Read the article

• PHP on IIS7 not showing pages

  - by Jeff

  I have a PHP website on a Windows 7 machine I'm working with and it cannot be viewed by any browser - IE, Chrome, Firefox. When navigating to the root of the website (default index.php) the browser reports it cannot find the address. Not a 404 error from the webserver, just as if it cannot resolve the name. Other websites in the same default web application that are also PHP work perfectly. I've aligned all folder permissions and everything else but this has got me stumped. I even went as far to create a new folder and throw in a test phpinfo() page and it worked. Copied this website's content to the new folder and it cannot find the index.php page. I checked all setting I know and can't seem to find what I'm missing. Anyone else encounter this issue? Remember the fix for it?

  Read the article

• How to set up a staging apt repository to securely manage upgrades

  - by andreash

  Hello, I would like to be able to run automatic apt-get upgrade (once per hour) on our servers (Ubuntu 10.04), so that I don't have to do it manually on all of them (about 15). However, for production machines, that's not a good idea ... So here's my idea: Set up a local repository for all 'approved' updates for critical packages. I would then push updated packages from upstream to our local repo after I tested them, and all servers could automatically (apt-cron?) upgrade from this repository. So my question is this: How do I configure apt on the clients so that they use the local repository only for all packages which exist on the local repository, and the upstream one for all other packages? Does this actually make sense? Or am I missing something? Anyways, thanks for your insight! Andreas.

  Read the article

• Is it a good idea to have the operating system on a solid state drive?

  - by Kenji Kina

  There is something I don't quite understand. I know a SSD helps with OS load times, but I'm not sure if all this boost is only noticeable/interesting when booting, or gives an all around considerably better experience thereafter. I am interested in having a quick and responsive environment after booting, which leads me to think that it'd be better to spend the SSD capacity in my most used apps (and the page file? Another inside question) and not the OS itself. This, of course, means that I don't know just how much the OS reads/writes its files during normal usage. So, how good an idea is it to dump the whole 20GB+ of Windows 7 OS into the SSD (considering the hefty price per GB of SSD capacity) if I can put up with the usual hard disk boot times? Would I be missing on a lot if I didn't?

  Read the article

• Explorer.exe does not starts itself at the startup

  - by Maven

  The problem I am facing is whenever I start my PC after use login window where it should show the start screen my PC just doesn’t show anything except for a mouse cursor. I can press CTRL ALT DELETE and go into task manager go into File Run New Task and then run explorer.exe sometimes this works and start screen becmoes accesible but sometimes I have to repeat it multiple times to make it work or sometimes I just have to restart my PC. More over while on the black screen and being able to access task manager If I right click processes there and open containing folder that also work I can access all my program/files from there but all that is missing is my desktop and start screen Can anybody help me with this? Plus can anybody tell like for explorer there is explorer.exe is there a .exe file which would start the start screen ?

  Read the article

• What Commands Does Windows Startup Repair Run?

  - by user138284

  Background: I created a wim image that we are planning to deploy to some of our computers, but when I image a computer with it from a flash drive it continually reports that the BOOTMGR is missing (and no, it's not booting off the flash drive). I am able to resolve this by running Windows Startup Repair, but I would rather just add whatever command is resolving the issue to a script that runs after the image. I have already tried running fixmbr, fixboot, rebuildbcd, and nt60, but none of those resolve the issue. Basically, I would like to know what exactly is being done when I run Windows Startup Repair.

  Read the article

• Setting up Kerberos SSO in Windows 2008 network

  - by Arturs Licis

  We recently introduced Kerberos (SPNEGO) Single Sign-on in our web-portal, and tested it on a Windows network with Windows 2003 domain controller. Now, trying to test it on Windows 2008 R2 controlled network, SSO just doesn't work due to defective tokens. Up to the moment I was pretty sure that there's something wrong about environment and that were NTLM tokens. We double checked IE settings etc, but nothing helped. Then we checked the following settings for both users (logged on a client test-machine, and the one used as a Service Principal): This account supports Kerberos AES 128 bit encryption. This account supports Kerberos AES 256 bit encryption. .. and error message changed to ' GSSException: Failure unspecified at GSS-API level (Mechanism level: Encryption type AES256CTS mode with HMAC SHA1-96 is not supported/enabled) It makes me think that Internet Explorer receives Kerberos tokens at all times, and there's just some configuration missing, or it was ktpass.exe to be incorrectly executed. Here's how ktpass.exe was invoked: C:ktpass /out portal1.keytab /mapuser USER /princ HTTP/[email protected] /pass *

  Read the article

• Question about Linux Device Drivers.

  - by smwikipedia

  I have just installed the Xubuntu. My box runs quite slower than before when installed with a Win7. I am wondering if I am missing some device drivers. I can use gnome-device-manager to list my devices. In the device list view, I saw several blue question mark on the left side of devices. Based on my windows experience, the question mark should indicate the device is not properly configured. Is it the same with gnome-device-manager? And most importantly, how could I know for sure whether or not the corresponding device drivers have been installed? Many thanks.

  Read the article

< Previous Page | 355 356 357 358 359 360 361 362 363 364 365 366  | Next Page >