Search Results

Search found 10883 results on 436 pages for 'thread timeout'.

Page 359/436 | < Previous Page | 355 356 357 358 359 360 361 362 363 364 365 366  | Next Page >

• Wi-Fi Stick with ZD1211 chip refuses to work on Ubuntu >8.10. No clue.

  - by Benjamin Maus

  I have a machine running Ubuntu 9.10 (Karmic *x86_64*). Everything is running smooth so far, except for the Wi-Fi USB Stick. The same device worked perfectly in 8.10. The wireless device is a GW-US54GXS using the Zydas Zd1211 chipset. Dmesg output after plugging in: [ 196.303436] phy0: Selected rate control algorithm 'minstrel' [ 196.304209] zd1211rw 2-1:1.0: phy0 [ 196.304227] usbcore: registered new interface driver zd1211rw [ 196.334137] usb 2-1: firmware: requesting zd1211/zd1211b_ub [ 196.357463] usb 2-1: firmware: requesting zd1211/zd1211b_uphr [ 196.402643] zd1211rw 2-1:1.0: firmware version 4725 [ 196.442611] zd1211rw 2-1:1.0: zd1211b chip 2019:5303 v4810 high 00-90-cc AL2230_RF pa0 ---N- [ 196.463814] usb 2-1: firmware: requesting zd1211/zd1211b_ub [ 196.466823] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Syslog output: Nov 5 11:20:24 somesystem kernel: [ 196.303436] phy0: Selected rate control algorithm 'minstrel' Nov 5 11:20:24 kierkegaard NetworkManager: <info> Found radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/ieee80211/phy0/rfkill0) (driver <unknown>) Nov 5 11:20:24 somesystem kernel: [ 196.304209] zd1211rw 2-1:1.0: phy0 Nov 5 11:20:24 somesystem kernel: [ 196.304227] usbcore: registered new interface driver zd1211rw Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wmaster0, iface: wmaster0) Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wmaster0, iface: wmaster0): no ifupdown configuration found. Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wlan0, iface: wlan0) Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wlan0, iface: wlan0): no ifupdown configuration found. Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): driver supports SSID scans (scan_capa 0x01). Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): new 802.11 WiFi device (driver: 'zd1211rw') Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2 Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): now managed Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): device state change: 1 -> 2 (reason 2) Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): bringing up device. Nov 5 11:20:24 somesystem kernel: [ 196.334137] usb 2-1: firmware: requesting zd1211/zd1211b_ub Nov 5 11:20:24 somesystem kernel: [ 196.357463] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Nov 5 11:20:24 somesystem kernel: [ 196.402643] zd1211rw 2-1:1.0: firmware version 4725 Nov 5 11:20:24 somesystem kernel: [ 196.442611] zd1211rw 2-1:1.0: zd1211b chip 2019:5303 v4810 high 00-90-cc AL2230_RF pa0 ---N- Nov 5 11:20:24 somesystem NetworkManager: <WARN> nm_device_hw_bring_up(): (wlan0): device not up after timeout! Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): deactivating device (reason: 2). Nov 5 11:20:24 somesystem kernel: [ 196.463814] usb 2-1: firmware: requesting zd1211/zd1211b_ub Nov 5 11:20:24 somesystem kernel: [ 196.466823] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Nov 5 11:20:29 somesystem wpa_supplicant[978]: Could not set interface 'wlan0' UP Nov 5 11:20:29 somesystem wpa_supplicant[978]: Failed to initialize driver interface Nov 5 11:20:29 somesystem NetworkManager: <WARN> nm_supplicant_interface_add_cb(): Unexpected supplicant error getting interface: wpa_supplicant couldn't grab this interface. Gnome tells me in the network menu that the device was "not ready". It appears in iwconfig but not in ifconfig. The same symptoms appear when I boot from the live CD. How can I solve this dilemma?

  Read the article

• Optimise Apache for EC2 micro instance

  - by Shiyu Sekam

  I'm running apache2 on a EC2 micro instance with ~600 mb RAM. The instance was running for almost a year without problems, but in the last weeks it just keeps crashing, because the server reached MaxClients. The server basically runs few websites, one wordpress blog(not often used), company website(most used) and 2 small sites, which are just internal. The database for the blog runs on RDS, so there's no Mysql running on this web server. When I came to the company, the server already was setup and is running apache + mod_php + prefork. We want to migrate that in the future to a nginx + php-fpm, but it still needs further testing. So for now I have to stick with the old setup. I also use CloudFlare DDOS protection in front of the server, because it was attacked a couple of the times in the last weeks. My company don't want to pay money for a better web server at this point, so I have to stick with the micro instance also. Additionally the code for the website we run is really bad and slow and sometimes a single page load can take up to 15 seconds. The whole website is dynamic and written in PHP, so caching isn't really an option here. It's a customized search for users. I've already turned off KeepAlive, which improved the performance a little bit. My prefork config looks like the following: StartServers 2 MinSpareServers 2 MaxSpareServers 5 ServerLimit 10 MaxClients 10 MaxRequestsPerChild 100 The server just becomes unresponsive after a while running and I've run the following command to see how many connections there are: netstat | grep http | wc -l 75 Trying to restart apache helps for a short moment, but after that a while the apache process(es) become unresponsive again. I've the following modules enabled(output of apache2ctl -M) Loaded Modules: core_module (static) log_config_module (static) logio_module (static) version_module (static) mpm_prefork_module (static) http_module (static) so_module (static) alias_module (shared) authz_host_module (shared) deflate_module (shared) dir_module (shared) expires_module (shared) mime_module (shared) negotiation_module (shared) php5_module (shared) rewrite_module (shared) setenvif_module (shared) ssl_module (shared) status_module (shared) Syntax OK apache2.conf # Security ServerTokens OS ServerSignature On TraceEnable On ServerName "web.example.com" ServerRoot "/etc/apache2" PidFile ${APACHE_PID_FILE} Timeout 30 KeepAlive off User www-data Group www-data AccessFileName .htaccess <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> <Directory /> Options FollowSymLinks AllowOverride None </Directory> DefaultType none HostnameLookups Off ErrorLog /var/log/apache2/error.log LogLevel warn EnableSendfile On #Listen 80 Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf Include /etc/apache2/ports.conf LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent Include /etc/apache2/conf.d/*.conf Include /etc/apache2/sites-enabled/*.conf Vhost of main site <VirtualHost *:80> ServerName www.example.com ## Vhost docroot DocumentRoot /srv/www/jenkins/Web ## Directories, there should at least be a declaration for /srv/www/jenkins/Web <Directory /srv/www/jenkins/Web> AllowOverride All Order allow,deny Allow from all </Directory> ## Load additional static includes ## Logging ErrorLog /var/log/apache2/www.example.com.error.log LogLevel warn ServerSignature Off CustomLog /var/log/apache2/www.example.com.access.log combined ## Rewrite rules RewriteEngine On RewriteCond %{HTTP_HOST} !^www.example.com$ RewriteRule ^.*$ http://www.example.com%{REQUEST_URI} [R=301,L] ## Server aliases ServerAlias www.example.invalid ServerAlias example.com ## Custom fragment <Location /srv/www/jenkins/Web/library> Order Deny,Allow Deny from all </Location> <Files ~ "^\.(.+)"> Order deny,allow deny from all </Files> </VirtualHost>

  Read the article

• Can't configure frame relay T1 on Cisco 1760

  - by sonar

  For the past few days I've been trying to configure a data T1 via a Frame Relay. Now I've been pretty unsuccessful at it, and it's been a while, since I've done this so please bare with me. The ISP provided me the following information: 1. IP address 2. Gateway address 3. Encapsulation Frame Relay 4. DLCI 100 5. BZ8 ESF (I think the bz8 was supposed to be b8zs) 6. Time Slot (1 al 24). And what I have configured up until now is the following: interface Serial0/0 ip address <ip address> 255.255.255.252 encapsulation frame-relay service-module t1 timeslots 1-24 frame-relay interface-dlci 100 sh service-module s0/0 (outputs): Module type is T1/fractional Hardware revision is 0.128, Software revision is 0.2, Image checksum is 0x73D70058, Protocol revision is 0.1 Receiver has no alarms. Framing is **ESF**, Line Code is **B8ZS**, Current clock source is line, Fraction has **24 timeslots** (64 Kbits/sec each), Net bandwidth is 1536 Kbits/sec. Last module self-test (done at startup): Passed Last clearing of alarm counters 00:17:17 loss of signal : 0, loss of frame : 0, AIS alarm : 0, Remote alarm : 2, last occurred 00:10:10 Module access errors : 0, Total Data (last 1 15 minute intervals): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs Data in current interval (138 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs sh int: FastEthernet0/0 is up, line protocol is up Hardware is PQUICC_FEC, address is 000d.6516.e5aa (bia 000d.6516.e5aa) Internet address is 10.0.0.1/24 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:20:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog 0 input packets with dribble condition detected 191 packets output, 20676 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out Serial0/0 is up, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 157, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 23, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 2/0, interface broadcasts 0 Last input 00:24:51, output 00:00:05, output hang never Last clearing of "show interface" counters 00:27:20 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 1152 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 23 packets input, 302 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 1725 input errors, 595 CRC, 1099 frame, 0 overrun, 0 ignored, 30 abort 246 packets output, 3974 bytes, 0 underruns 0 output errors, 0 collisions, 48 interface resets 0 output buffer failures, 0 output buffers swapped out 4 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up Serial0/0.1 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY Last clearing of "show interface" counters never Serial0/0.100 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU Internet address is <ip address>/30 MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY Last clearing of "show interface" counters never And everything seems to be accounted for to me, but apparently I'm missing something. My issue is that I'm stuck on interface up, line protocol down, so the T1 doesn't go up. Any ideas? Thank you,

  Read the article

• Securing an ASP.NET MVC 2 Application

  - by rajbk

  This post attempts to look at some of the methods that can be used to secure an ASP.NET MVC 2 Application called Northwind Traders Human Resources.  The sample code for the project is attached at the bottom of this post. We are going to use a slightly modified Northwind database. The screen capture from SQL server management studio shows the change. I added a new column called Salary, inserted some random salaries for the employees and then turned off AllowNulls.   The reporting relationship for Northwind Employees is shown below.   The requirements for our application are as follows: Employees can see their LastName, FirstName, Title, Address and Salary Employees are allowed to edit only their Address information Employees can see the LastName, FirstName, Title, Address and Salary of their immediate reports Employees cannot see records of non immediate reports.  Employees are allowed to edit only the Salary and Title information of their immediate reports. Employees are not allowed to edit the Address of an immediate report Employees should be authenticated into the system. Employees by default get the “Employee” role. If a user has direct reports, they will also get assigned a “Manager” role. We use a very basic empId/pwd scheme of EmployeeID (1-9) and password test$1. You should never do this in an actual application. The application should protect from Cross Site Request Forgery (CSRF). For example, Michael could trick Steven, who is already logged on to the HR website, to load a page which contains a malicious request. where without Steven’s knowledge, a form on the site posts information back to the Northwind HR website using Steven’s credentials. Michael could use this technique to give himself a raise :-) UI Notes The layout of our app looks like so: When Nancy (EmpID 1) signs on, she sees the default page with her details and is allowed to edit her address. If Nancy attempts to view the record of employee Andrew who has an employeeID of 2 (Employees/Edit/2), she will get a “Not Authorized” error page. When Andrew (EmpID 2) signs on, he can edit the address field of his record and change the title and salary of employees that directly report to him. Implementation Notes All controllers inherit from a BaseController. The BaseController currently only has error handling code. When a user signs on, we check to see if they are in a Manager role. We then create a FormsAuthenticationTicket, encrypt it (including the roles that the employee belongs to) and add it to a cookie. private void SetAuthenticationCookie(int employeeID, List<string> roles) { HttpCookiesSection cookieSection = (HttpCookiesSection) ConfigurationManager.GetSection("system.web/httpCookies"); AuthenticationSection authenticationSection = (AuthenticationSection) ConfigurationManager.GetSection("system.web/authentication"); FormsAuthenticationTicket authTicket = new FormsAuthenticationTicket( 1, employeeID.ToString(), DateTime.Now, DateTime.Now.AddMinutes(authenticationSection.Forms.Timeout.TotalMinutes), false, string.Join("|", roles.ToArray())); String encryptedTicket = FormsAuthentication.Encrypt(authTicket); HttpCookie authCookie = new HttpCookie(FormsAuthentication.FormsCookieName, encryptedTicket); if (cookieSection.RequireSSL || authenticationSection.Forms.RequireSSL) { authCookie.Secure = true; } HttpContext.Current.Response.Cookies.Add(authCookie); } We read this cookie back in Global.asax and set the Context.User to be a new GenericPrincipal with the roles we assigned earlier. protected void Application_AuthenticateRequest(Object sender, EventArgs e){ if (Context.User != null) { string cookieName = FormsAuthentication.FormsCookieName; HttpCookie authCookie = Context.Request.Cookies[cookieName]; if (authCookie == null) return; FormsAuthenticationTicket authTicket = FormsAuthentication.Decrypt(authCookie.Value); string[] roles = authTicket.UserData.Split(new char[] { '|' }); FormsIdentity fi = (FormsIdentity)(Context.User.Identity); Context.User = new System.Security.Principal.GenericPrincipal(fi, roles); }} We ensure that a user has permissions to view a record by creating a custom attribute AuthorizeToViewID that inherits from ActionFilterAttribute. public class AuthorizeToViewIDAttribute : ActionFilterAttribute{ IEmployeeRepository employeeRepository = new EmployeeRepository(); public override void OnActionExecuting(ActionExecutingContext filterContext) { if (filterContext.ActionParameters.ContainsKey("id") && filterContext.ActionParameters["id"] != null) { if (employeeRepository.IsAuthorizedToView((int)filterContext.ActionParameters["id"])) { return; } } throw new UnauthorizedAccessException("The record does not exist or you do not have permission to access it"); }} We add the AuthorizeToView attribute to any Action method that requires authorization. [HttpPost][Authorize(Order = 1)]//To prevent CSRF[ValidateAntiForgeryToken(Salt = Globals.EditSalt, Order = 2)]//See AuthorizeToViewIDAttribute class[AuthorizeToViewID(Order = 3)] [ActionName("Edit")]public ActionResult Update(int id){ var employeeToEdit = employeeRepository.GetEmployee(id); if (employeeToEdit != null) { //Employees can edit only their address //A manager can edit the title and salary of their subordinate string[] whiteList = (employeeToEdit.IsSubordinate) ? new string[] { "Title", "Salary" } : new string[] { "Address" }; if (TryUpdateModel(employeeToEdit, whiteList)) { employeeRepository.Save(employeeToEdit); return RedirectToAction("Details", new { id = id }); } else { ModelState.AddModelError("", "Please correct the following errors."); } } return View(employeeToEdit);} The Authorize attribute is added to ensure that only authorized users can execute that Action. We use the TryUpdateModel with a white list to ensure that (a) an employee is able to edit only their Address and (b) that a manager is able to edit only the Title and Salary of a subordinate. This works in conjunction with the AuthorizeToViewIDAttribute. The ValidateAntiForgeryToken attribute is added (with a salt) to avoid CSRF. The Order on the attributes specify the order in which the attributes are executed. The Edit View uses the AntiForgeryToken helper to render the hidden token: ......<% using (Html.BeginForm()) {%><%=Html.AntiForgeryToken(NorthwindHR.Models.Globals.EditSalt)%><%= Html.ValidationSummary(true, "Please correct the errors and try again.") %><div class="editor-label"> <%= Html.LabelFor(model => model.LastName) %></div><div class="editor-field">...... The application uses View specific models for ease of model binding. public class EmployeeViewModel{ public int EmployeeID; [Required] [DisplayName("Last Name")] public string LastName { get; set; } [Required] [DisplayName("First Name")] public string FirstName { get; set; } [Required] [DisplayName("Title")] public string Title { get; set; } [Required] [DisplayName("Address")] public string Address { get; set; } [Required] [DisplayName("Salary")] [Range(500, double.MaxValue)] public decimal Salary { get; set; } public bool IsSubordinate { get; set; }} To help with displaying readonly/editable fields, we use a helper method. //Simple extension method to display a TextboxFor or DisplayFor based on the isEditable variablepublic static MvcHtmlString TextBoxOrLabelFor<TModel, TProperty>(this HtmlHelper<TModel> htmlHelper, Expression<Func<TModel, TProperty>> expression, bool isEditable){ if (isEditable) { return htmlHelper.TextBoxFor(expression); } else { return htmlHelper.DisplayFor(expression); }} The helper method is used in the view like so: <%=Html.TextBoxOrLabelFor(model => model.Title, Model.IsSubordinate)%> As mentioned in this post, there is a much easier way to update properties on an object. Download Demo Project VS 2008, ASP.NET MVC 2 RTM Remember to change the connectionString to point to your Northwind DB NorthwindHR.zip Feedback and bugs are always welcome :-)

  Read the article

• Soapi.CS : A fully relational fluent .NET Stack Exchange API client library

  - by Sky Sanders

  Soapi.CS for .Net / Silverlight / Windows Phone 7 / Mono as easy as breathing...: var context = new ApiContext(apiKey).Initialize(false); Question thisPost = context.Official .StackApps .Questions.ById(386) .WithComments(true) .First(); Console.WriteLine(thisPost.Title); thisPost .Owner .Questions .PageSize(5) .Sort(PostSort.Votes) .ToList() .ForEach(q=> { Console.WriteLine("\t" + q.Score + "\t" + q.Title); q.Timeline.ToList().ForEach(t=> Console.WriteLine("\t\t" + t.TimelineType + "\t" + t.Owner.DisplayName)); Console.WriteLine(); }); // if you can think it, you can get it. Output Soapi.CS : A fully relational fluent .NET Stack Exchange API client library 21 Soapi.CS : A fully relational fluent .NET Stack Exchange API client library Revision code poet Revision code poet Votes code poet Votes code poet Revision code poet Revision code poet Revision code poet Votes code poet Votes code poet Votes code poet Revision code poet Revision code poet Revision code poet Revision code poet Revision code poet Revision code poet Revision code poet Revision code poet Revision code poet Revision code poet Votes code poet Comment code poet Revision code poet Votes code poet Revision code poet Revision code poet Revision code poet Answer code poet Revision code poet Revision code poet 14 SOAPI-WATCH: A realtime service that notifies subscribers via twitter when the API changes in any way. Votes code poet Revision code poet Votes code poet Comment code poet Comment code poet Comment code poet Votes lfoust Votes code poet Comment code poet Comment code poet Comment code poet Comment code poet Revision code poet Comment lfoust Votes code poet Revision code poet Votes code poet Votes lfoust Votes code poet Revision code poet Comment Dave DeLong Revision code poet Revision code poet Votes code poet Comment lfoust Comment Dave DeLong Comment lfoust Comment lfoust Comment Dave DeLong Revision code poet 11 SOAPI-EXPLORE: Self-updating single page JavaSript API test harness Votes code poet Votes code poet Votes code poet Votes code poet Votes code poet Comment code poet Revision code poet Votes code poet Revision code poet Revision code poet Revision code poet Comment code poet Revision code poet Votes code poet Comment code poet Question code poet Votes code poet 11 Soapi.JS V1.0: fluent JavaScript wrapper for the StackOverflow API Comment George Edison Comment George Edison Comment George Edison Comment George Edison Comment George Edison Comment George Edison Answer George Edison Votes code poet Votes code poet Votes code poet Votes code poet Revision code poet Revision code poet Answer code poet Comment code poet Revision code poet Comment code poet Comment code poet Comment code poet Revision code poet Revision code poet Votes code poet Votes code poet Votes code poet Votes code poet Comment code poet Comment code poet Comment code poet Comment code poet Comment code poet 9 SOAPI-DIFF: Your app broke? Check SOAPI-DIFF to find out what changed in the API Votes code poet Revision code poet Comment Dennis Williamson Answer Dennis Williamson Votes code poet Votes Dennis Williamson Comment code poet Question code poet Votes code poet About A robust, fully relational, easy to use, strongly typed, end-to-end StackOverflow API Client Library. Out of the box, Soapi provides you with a robust client library that abstracts away most all of the messy details of consuming the API and lets you concentrate on implementing your ideas. A few features include: A fully relational model of the API data set exposed via a fully 'dot navigable' IEnumerable (LINQ) implementation. Simply tell Soapi what you want and it will get it for you. e.g. "On my first question, from the author of the first comment, get the first page of comments by that person on any post" my.Questions.First().Comments.First().Owner.Comments.ToList(); (yes this is a real expression that returns the data as expressed!) Full coverage of the API, all routes and all parameters with an intuitive syntax. Strongly typed Domain Data Objects for all API data structures. Eager and Lazy Loading of 'stub' objects. Eager\Lazy loading may be disabled. When finer grained control of requests is desired, the core RouteMap objects may be leveraged to request data from any of the API paths using all available parameters as documented on the help pages. A rich Asynchronous implementation. A configurable request cache to reduce unnecessary network traffic and to simplify your usage logic. There is no need to go out of your way to be frugal. You may set a distinct cache duration for any particular route. A configurable request throttle to ensure compliance with the api terms of usage and to simplify your code in that you do not have to worry about and respond to 50X errors. The RequestCache and Throttled Queue are thread-safe, so can make as many requests as you like from as many threads as you like as fast as you like and not worry about abusing the api or having to write reams of management/compensation code. Configurable retry threshold that will, by default, make up to 3 attempts to retrieve a request before failing. Every request made by Soapi is properly formed and directed so most any http error will be the result of a timeout or other network infrastructure. A retry buffer provides a level of fault tolerance that you can rely on. An almost identical javascript library, Soapi.JS, and it's full figured big brother, Soapi.JS2, that will enable you to leverage your server cycles and bandwidth for only those tasks that require it and offload things like status updates to the client's browser. License Licensed GPL Version 2 license. Why is Soapi.CS GPL? Can I get an LGPL license for Soapi.CS? (hint: probably) Platforms .NET 3.5 .NET 4.0 Silverlight 3 Silverlight 4 Windows Phone 7 Mono Download Source code lives @ http://soapics.codeplex.com. Binary releases are forthcoming. codeplex is acting up again. get the source and binaries @ http://bitbucket.org/bitpusher/soapi.cs/downloads The source is C# 3.5. and includes projects and solutions for the following IDEs Visual Studio 2008 Visual Studio 2010 ModoDevelop 2.4 Documentation Full documentation is available at http://soapi.info/help/cs/index.aspx Sample Code / Usage Examples Sample code and usage examples will be added as answers to this question. Full API Coverage all API routes are covered Full Parameter Parity If the API exposes it, Soapi giftwraps it for you. Building a simple app with Soapi.CS - a simple app that gathers all traces of a user in the whole stackiverse. Fluent Configuration - Setting up a Soapi.ApiContext could not be easier Bulk Data Import - A tiny app that quickly loads a SQLite data file with all users in the stackiverse. Paged Results - Soapi.CS transparently handles multi-page operations. Asynchronous Requests - Soapi.CS provides a rich asynchronous model that is especially useful when writing api apps in Silverlight or Windows Phone 7. Caching and Throttling - how and why Apps that use Soapi.CS Soapi.FindUser - .net utility for locating a user anywhere in the stackiverse Soapi.Explore - The entire API at your command Soapi.LastSeen - List users by last access time Add your app/site here - I know you are out there ;-) if you are not comfortable editing this post, simply add a comment and I will add it. The CS/SL/WP7/MONO libraries all compile the same code and with the exception of environmental considerations of Silverlight, the code samples are valid for all libraries. You may also find guidance in the test suites. More information on the SOAPI eco-system. Contact This library is currently the effort of me, Sky Sanders (code poet) and can be reached at gmail - sky.sanders Any who are interested in improving this library are welcome. Support Soapi You can help support this project by voting for Soapi's Open Source Ad post For more information about the origins of Soapi.CS and the rest of the Soapi eco-system see What is Soapi and why should I care?

  Read the article

• Why should you choose Oracle WebLogic 12c instead of JBoss EAP 6?

  - by Ricardo Ferreira

  In this post, I will cover some technical differences between Oracle WebLogic 12c and JBoss EAP 6, which was released a couple days ago from Red Hat. This article claims to help you in the evaluation of key points that you should consider when choosing for an Java EE application server. In the following sections, I will present to you some important aspects that most customers ask us when they are seriously evaluating for an middleware infrastructure, specially if you are considering JBoss for some reason. I would suggest that you keep the following question in mind while you are reading the points: "Why should I choose JBoss instead of WebLogic?" 1) Multi Datacenter Deployment and Clustering - D/R ("Disaster & Recovery") architecture support is embedded on the WebLogic Server 12c product. JBoss EAP 6 on the other hand has no direct D/R support included, Red Hat relies on third-part tools with higher prices. When you consider a middleware solution to host your business critical application, you should worry with every architectural aspect that are related with the solution. Fail-over support is one little aspect of a truly reliable solution. If you do not worry about D/R, your solution will not be reliable. Having said that, with Red Hat and JBoss EAP 6, you have this extra cost that will increase considerably the total cost of ownership of the solution. As we commonly hear from analysts, open-source are not so cheaper when you start seeing the big picture. - WebLogic Server 12c supports advanced LAN clustering, detection of death servers and have a common alert framework. JBoss EAP 6 on the other hand has limited LAN clustering support with no server death detection. They do not generate any alerts when servers goes down (only if you buy JBoss ON which is a separated technology, but until now does not support JBoss EAP 6) and manual intervention are required when servers goes down. In most cases, admin people must rely on "kill -9", "tail -f someFile.log" and "ps ax | grep java" commands to manage failures and clustering anomalies. - WebLogic Server 12c supports the concept of Node Manager, which is a separated process that runs on the physical | virtual servers that allows extend the administration of the cluster to WebLogic managed servers that are often distributed across multiple machines and geographic locations. JBoss EAP 6 on the other hand has no equivalent technology. Whole server instances must be managed individually. - WebLogic Server 12c Node Manager supports Coherence to boost performance when managing servers. JBoss EAP 6 on the other hand has no similar technology. There is no way to coordinate JBoss and infiniband instances provided by JBoss using high throughput and low latency protocols like InfiniBand. The Node Manager feature also allows another very important feature that JBoss EAP lacks: secure the administration. When using WebLogic Node Manager, all the administration tasks are sent to the managed servers in a secure tunel protected by a certificate, which means that the transport layer that separates the WebLogic administration console from the managed servers are secured by SSL. - WebLogic Server 12c are now integrated with OTD ("Oracle Traffic Director") which is a web server technology derived from the former Sun iPlanet Web Server. This software complements the web server support offered by OHS ("Oracle HTTP Server"). Using OTD, WebLogic instances are load-balanced by a high powerful software that knows how to handle SDP ("Socket Direct Protocol") over InfiniBand, which boost performance when used with engineered systems technologies like Oracle Exalogic Elastic Cloud. JBoss EAP 6 on the other hand only offers support to Apache Web Server with custom modules created to deal with JBoss clusters, but only across standard TCP/IP networks.  2) Application and Runtime Diagnostics - WebLogic Server 12c have diagnostics capabilities embedded on the server called WLDF ("WebLogic Diagnostic Framework") so there is no need to rely on third-part tools. JBoss EAP 6 on the other hand has no diagnostics capabilities. Their only diagnostics tool is the log generated by the application server. Admin people are encouraged to analyse thousands of log lines to find out what is going on. - WebLogic Server 12c complement WLDF with JRockit MC ("Mission Control"), which provides to administrators and developers a complete insight about the JVM performance, behavior and possible bottlenecks. WebLogic Server 12c also have an classloader analysis tool embedded, and even a log analyzer tool that enables administrators and developers to view logs of multiple servers at the same time. JBoss EAP 6 on the other hand relies on third-part tools to do something similar. Again, only log searching are offered to find out whats going on. - WebLogic Server 12c offers end-to-end traceability and monitoring available through Oracle EM ("Enterprise Manager"), including monitoring of business transactions that flows through web servers, ESBs, application servers and database servers, all of this with high deep JVM analysis and diagnostics. JBoss EAP 6 on the other hand, even using JBoss ON ("Operations Network"), which is a separated technology, does not support those features. Red Hat relies on third-part tools to provide direct Oracle database traceability across JVMs. One of those tools are Oracle EM for non-Oracle middleware that manage JBoss, Tomcat, Websphere and IIS transparently. - WebLogic Server 12c with their JRockit support offers a tool called JRockit Flight Recorder, which can give developers a complete visibility of a certain period of application production monitoring with zero extra overhead. This automatic recording allows you to deep analyse threads latency, memory leaks, thread contention, resource utilization, stack overflow damages and GC ("Garbage Collection") cycles, to observe in real time stop-the-world phenomenons, generational, reference count and parallel collects and mutator threads analysis. JBoss EAP 6 don't even dream to support something similar, even because they don't have their own JVM. 3) Application Server Administration - WebLogic Server 12c offers a complete administration console complemented with scripting and macro-like recording capabilities. A single WebLogic console can managed up to hundreds of WebLogic servers belonging to the same domain. JBoss EAP 6 on the other hand has a limited console and provides a XML centric administration. JBoss, after ten years, started the development of a rudimentary centralized administration that still leave a lot of administration tasks aside, so admin people and developers must touch scripts and XML configuration files for most advanced and even simple administration tasks. This lead applications to error prone and risky deployments. Even using JBoss ON, JBoss EAP are not able to offer decent administration features for admin people which must be high skilled in JBoss internal architecture and its managing capabilities. - Oracle EM is available to manage multiple domains, databases, application servers, operating systems and virtualization, with a complete end-to-end visibility. JBoss ON does not provide management capabilities across the complete architecture, only basic monitoring. Even deployment must be done aside JBoss ON which does no integrate well with others softwares than JBoss. Until now, JBoss ON does not supports JBoss EAP 6, so even their minimal support for JBoss are not available for JBoss EAP 6 leaving customers uncovered and subject to high skilled JBoss admin people. - WebLogic Server 12c has the same administration model whatever is the topology selected by the customer. JBoss EAP 6 on the other hand differentiates between two operational models: standalone-mode and domain-mode, that are not consistent with each other. Depending on the mode used, the administration skill is different. - WebLogic Server 12c has no point-of-failures processes, and it does not need to define any specialized server. Domain model in WebLogic is available for years (at least ten years or more) and is production proven. JBoss EAP 6 on the other hand needs special processes to garantee JBoss integrity, the PC ("Process-Controller") and the HC ("Host-Controller"). Different from WebLogic, the domain model in JBoss is quite new (one year at tops) of maturity, and need to mature considerably until start doing things like WebLogic domain model does. - WebLogic Server 12c supports parallel deployment model which enables some artifacts being deployed at the same time. JBoss EAP 6 on the other hand does not have any similar feature. Every deployment are done atomically in the containers. This means that if you have a huge EAR (an EAR of 120 MB of size for instance) and deploy onto JBoss EAP 6, this EAR will take some minutes in order to starting accept thread requests. The same EAR deployed onto WebLogic Server 12c will reduce the deployment time at least in 2X compared to JBoss. 4) Support and Upgrades - WebLogic Server 12c has patch management available. JBoss EAP 6 on the other hand has no patch management available, each JBoss EAP instance should be patched manually. To achieve such feature, you need to buy a separated technology called JBoss ON ("Operations Network") that manage this type of stuff. But until now, JBoss ON does not support JBoss EAP 6 so, in practice, JBoss EAP 6 does not have this feature. - WebLogic Server 12c supports previuous WebLogic domains without any reconfiguration since its kernel is robust and mature since its creation in 1995. JBoss EAP 6 on the other hand has a proven lack of supportability between JBoss AS 4, 5, 6 and 7. Different kernels and messaging engines were implemented in JBoss stack in the last five years reveling their incapacity to create a well architected and proven middleware technology. - WebLogic Server 12c has patch prescription based on customer configuration. JBoss EAP 6 on the other hand has no such capability. People need to create ticket supports and have their installations revised by Red Hat support guys to gain some patch prescription from them. - Oracle WebLogic Server independent of the version has 8 years of support of new patches and has lifetime release of existing patches beyond that. JBoss EAP 6 on the other hand provides patches for a specific application server version up to 5 years after the release date. JBoss EAP 4 and previous versions had only 4 years. A good question that Red Hat will argue to answer is: "what happens when you find issues after year 5"?  5) RAC ("Real Application Clusters") Support - WebLogic Server 12c ships with a specific JDBC driver to leverage Oracle RAC clustering capabilities (Fast-Application-Notification, Transaction Affinity, Fast-Connection-Failover, etc). Oracle JDBC thin driver are also available. JBoss EAP 6 on the other hand ships only the standard Oracle JDBC thin driver. Load balancing with Oracle RAC are not supported. Manual intervention in case of planned or unplanned RAC downtime are necessary. In JBoss EAP 6, situation does not reestablish automatically after downtime. - WebLogic Server 12c has a feature called Active GridLink for Oracle RAC which provides up to 3X performance on OLTP applications. This seamless integration between WebLogic and Oracle database enable more value added to critical business applications leveraging their investments in Oracle database technology and Oracle middleware. JBoss EAP 6 on the other hand has no performance gains at all, even when admin people implement some kind of connection-pooling tuning. - WebLogic Server 12c also supports transaction and web session affinity to the Oracle RAC, which provides aditional gains of performance. This is particularly interesting if you are creating a reliable solution that are distributed not only in an LAN cluster, but into a different data center. JBoss EAP 6 on the other hand has no such support. 6) Standards and Technology Support - WebLogic Server 12c is fully Java EE 6 compatible and production ready since december of 2011. JBoss EAP 6 on the other hand became fully compatible with Java EE 6 only in the community version after three months, and production ready only in a few days considering that this article was written in June of 2012. Red Hat says that they are the masters of innovation and technology proliferation, but compared with Oracle and even other proprietary vendors like IBM, they historically speaking are lazy to deliver the most newest technologies and standards adherence. - Oracle is the steward of Java, driving innovation into the platform from commercial and open-source vendors. Red Hat on the other hand does not have its own JVM and relies on third-part JVMs to complete their application server offer. 95% of Red Hat customers are using Oracle HotSpot as JVM, which means that without Oracle involvement, their support are limited exclusively to the application server layer and we all know that most problems are happens in the JVM layer. - WebLogic Server 12c supports natively JDK 7, which empower developers to explore the maximum of the Java platform productivity when writing code. This feature differentiate WebLogic from others application servers (except GlassFish that are also managed by Oracle) because the usage of JDK 7 introduce such remarkable productivity features like the "try-with-resources" enhancement, catching multiple exceptions with one try block, Strings in the switch statements, JVM improvements in terms of JDBC, I/O, networking, security, concurrency and of course, the most important feature of Java 7: native support for multiple non-Java languages. More features regarding JDK 7 can be found here. JBoss EAP 6 on the other hand does not support JDK 7 officially, they comment in their community version that "Java SE 7 can be used with JBoss 7" which does not gives you any guarantees of enterprise support for JDK 7. - Oracle WebLogic Server 12c supports integration with Spring framework allowing Spring applications to use WebLogic special transaction manager, exposing bean interfaces to WebLogic MBeans to take advantage of all WebLogic monitoring and administration advantages. JBoss EAP 6 on the other hand has no special integration with Spring. In fact, Red Hat offers a suspicious package called "JBoss Web Platform" that in theory supports Spring, but in practice this package does not offers any special integration. It is just a facility for Red Hat customers to have support from both JBoss and Spring technology using the same customer support. 7) Lightweight Development - Oracle WebLogic Server 12c and Oracle GlassFish are completely integrated and can share applications without any modifications. Starting with the 12c version, WebLogic now understands natively GlassFish deployment descriptors and specific configurations in order to offer you a truly and reliable migration path from a community Java EE application server to a enterprise middleware product like WebLogic. JBoss EAP 6 on the other hand has no support to natively reuse an existing (or still in development) application from JBoss AS community server. Users of JBoss suffer of critical issues during deployment time that includes: changing the libraries and dependencies of the application, patching the DTD or XSD deployment descriptors, refactoring of the application layers due classloading issues and anomalies, rebuilding of persistence, business and web layers due issues with "usage of the certified version of an certain dependency" or "frameworks that Red Hat potentially does not recommend" etc. If you have the culture or enterprise IT directive of developing Java EE applications using community middleware to in a certain future, transition to enterprise (supported by a vendor) middleware, Oracle WebLogic plus Oracle GlassFish offers you a more sustainable solution. - WebLogic Server 12c has a very light ZIP distribution (less than 165 MB). JBoss EAP 6 ZIP size is around 130 MB, together with JBoss ON you have more 100 MB resulting in a higher download footprint. This is particularly interesting if you plan to use automated setup of application server instances (for example, to rapidly setup a development or staging environment) using Maven or Hudson. - WebLogic Server 12c has a complete integration with Maven allowing developers to setup WebLogic domains with few commands. Tasks like downloading WebLogic, installation, domain creation, data sources deployment are completely integrated. JBoss EAP 6 on the other hand has a limited offer integration with those tools.  - WebLogic Server 12c has a startup mode called WLX that turns-off EJB, JMS and JCA containers leaving enabled only the web container with Java EE 6 web profile. JBoss EAP 6 on the other hand has no such feature, you need to disable manually the containers that you do not want to use. - WebLogic Server 12c supports fastswap, which enables you to change classes without redeployment. This is particularly interesting if you are developing patches for the application that is already deployed and you do not want to redeploy the entire application. This is the same behavior that most application servers offers to JSP pages, but with WebLogic Server 12c, you have the same feature for Java classes in general. JBoss EAP 6 on the other hand has no such support. Even JBoss EAP 5 does not support this until now. 8) JMS and Messaging - WebLogic Server 12c has a proven and high scalable JMS implementation since its initial release in 1995. JBoss EAP 6 on the other hand has a still immature technology called HornetQ, which was introduced in JBoss EAP 5 replacing everything that was implemented in the previous versions. Red Hat loves to introduce new technologies across JBoss versions, playing around with customers and their investments. And when they are asked about why they have changed the implementation and caused such a mess, their answer is always: "the previous implementation was inadequate and not aligned with the community strategy so we are creating a new a improved one". This Red Hat practice leads to uncomfortable investments that in a near future (sometimes less than a year) will be affected in someway. - WebLogic Server 12c has troubleshooting and monitoring features included on the WebLogic console and WLDF. JBoss EAP 6 on the other hand has no direct monitoring on the console, activity is reflected only on the logs, no debug logs available in case of JMS issues. - WebLogic Server 12c has extremely good performance and scalability. JBoss EAP 6 on the other hand has a JMS storage mechanism relying on Oracle database or MySQL. This means that if an issue in production happens and Red Hat affirms that an performance issue is happening due to database problems, they will not support you on the performance issue. They will orient you to call Oracle instead. - WebLogic Server 12c supports messaging enterprise features like SAF ("Store and Forward"), Distributed Queues/Topics and Foreign JMS providers support that leverage JMS implementations without compromise developer code making things completely transparent. JBoss EAP 6 on the other hand do not even dream to support such features. 9) Caching and Grid - Coherence, which is the leading and most mature data grid technology from Oracle, is available since early 2000 and was integrated with WebLogic in 2009. Coherence and WebLogic clusters can be both managed from WebLogic administrative console. Even Node Manager supports Coherence. JBoss on the other hand discontinued JBoss Cache, which was their caching implementation just like they did with the messaging implementation (JBossMQ) which was a issue for long term customers. JBoss EAP 6 ships InfiniSpan version 1.0 which is immature and lack a proven record of successful cases and reliability. - WebLogic Server 12c has a feature called ActiveCache which uses Coherence to, without any code changes, replicate HTTP sessions from both WebLogic and other application servers like JBoss, Tomcat, Websphere, GlassFish and even Microsoft IIS. JBoss EAP 6 on the other hand does have such support and even when they do in the future, they probably will support only their own application server. - Coherence can be used to manage both L1 and L2 cache levels, providing support to Oracle TopLink and others JPA compliant implementations, even Hibernate. JBoss EAP 6 and Infinispan on the other hand supports only Hibernate. And most important of all: Infinispan does not have any successful case of L1 or L2 caching level support using Hibernate, which lead us to reflect about its viability. 10) Performance - WebLogic Server 12c is certified with Oracle Exalogic Elastic Cloud and can run unchanged applications at this engineered system. This approach can benefit customers from Exalogic optimization's of both kernel and JVM layers to boost performance in terms of 10X for web, OLTP, JMS and grid applications. JBoss EAP 6 on the other hand has no investment on engineered systems: customers do not have the choice to deploy on a Java ultra fast system if their project becomes relevant and performance issues are detected. - WebLogic Server 12c maintains a performance gain across each new release: starting on WebLogic 5.1, the overall performance gain has been close to 4X, which close to a 20% gain release by release. JBoss on the other hand does not provide SPECJAppServer or SPECJEnterprise performance benchmarks. Their so called "performance gains" remains hidden in their customer environments, which lead us to think if it is true or not since we will never get access to those environments. - WebLogic Server 12c has industry performance benchmarks with submissions across platforms and configurations leading SPECJ. Oracle WebLogic leads SPECJAppServer performance in multiple categories, fitting all customer topologies like: dual-node, single-node, multi-node and multi-node with RAC. JBoss... again, does not provide any SPECJAppServer performance benchmarks. - WebLogic Server 12c has a feature called work manager which allows your application to embrace new performance levels based on critical resource utilization of the CPUs usage. Work managers prioritizes work and allocates threads based on an execution model that takes into account administrator-defined parameters and actual run-time performance and throughput. JBoss EAP 6 on the other hand has no compared feature and probably they never will. Not supporting such feature like work managers, JBoss EAP 6 forces admin people and specially developers to uncover performance gains in a intrusive way, rewriting the code and doing performance refactorings. 11) Professional Services Support - WebLogic Server 12c and any other technology sold by Oracle give customers the possibility of hire OCS ("Oracle Consulting Services") to manage critical scenarios, deployment assistance of new applications, high skilled consultancy of architecture, best practices and people allocation together with customer teams. All OCS services are available without any restrictions, having the customer bought software from Oracle or just starting their implementation before any acquisition. JBoss EAP 6 or Red Hat to be more specifically, only offers professional services if you buy subscriptions from them. If you are developing a new critical application for your business and need the help of Red Hat for a serious issue or architecture decision, they will probably say: "OK... I can help you but after you buy subscriptions from me". Red Hat also does not allows their professional services consultants to manage environments that uses community based software. They will probably force you to first buy a subscription, download their "enterprise" version and them, optionally hire their consultants. - Oracle provides you our university to educate your team into our technologies, including of course specialized trainings of WebLogic application server. At any time and location, you can hire Oracle to train your team so you get trustful knowledge according to your specific needs. Certifications for the products are also available if your technical people desire to differentiate themselves as professionals. Red Hat on the other hand have a limited pool of resources to train your team in their technologies. Basically they are selling training and certification for RHEL ("Red Hat Enterprise Linux") but if you demand more specialized training in JBoss middleware, they will probably connect you to some "certified" partner localized training since they are apparently discontinuing their education center, at least here in Brazil. They were not able to reproduce their success with RHEL education to their middleware division since they need first sell the subscriptions to after gives you specialized training. And again, they only offer you specialized training based on their enterprise version (EAP in the case of JBoss) which means that the courses will be a quite outdated. There are reports of developers that took official training's from Red Hat at this year (2012) and in a certain JBoss advanced course, Red Hat supposedly covered JBossMQ as the messaging subsystem, and even the printed material provided was based on JBossMQ since the training was created for JBoss EAP 4.3. 12) Encouraging Transparency without Ulterior Motives - WebLogic Server 12c like any other software from Oracle can be downloaded any time from anywhere, you should only possess an OTN ("Oracle Technology Network") credential and you can download any enterprise software how many times you want. And is not some kind of "trial" version. It is the official binaries that will be running for ever in your data center. Oracle does not encourages the usage of "specific versions" of our software. The binaries you buy from Oracle are the same binaries anyone in the world could download and use for testing and personal education. JBoss EAP 6 on the other hand are not available for download unless you buy a subscription and get access to the Red Hat enterprise repositories. If you need to test, learn or just start creating your application using Red Hat's middleware software, you should download it from the community website. You are not allowed to download the enterprise version that, according to Red Hat are more secure, reliable and robust. But no one of us want to start the development of a software with an unsecured, unreliable and not scalable middleware right? So what you do? You are "invited" by Red Hat to buy subscriptions from them to get access to the "cool" version of the software. - WebLogic Server 12c prices are publicly available in the Oracle website. If you want to know right now how much WebLogic will cost to your organization, just click here and get access to our price list. In the case of WebLogic, check out the "US Oracle Technology Commercial Price List". Oracle also encourages you to get in touch with a sales representative to discuss discounts that would make possible the investment into our technology. But you are not required to do this, only if you are interested in buying our technology or maybe you want to discuss some discount scenarios. JBoss EAP 6 on the other hand does not have its cost publicly available in Red Hat's website or in any other media, at least is not so easy to get such information. The only link you will possibly find in their website is a "Contact a Sales Representative" link. This is not a very good relationship between an customer and an vendor. This is not an example of transparency, mainly when the software are sold as open. In this situations, customers expects to see the software prices publicly available, so they can have the chance to decide, based on the existing features of the software, if the cost is fair or not. Conclusion Oracle WebLogic is the most mature, secure, reliable and scalable Java EE application server of the market, and have a proven record of success around the globe to prove it's majority. Don't lose the chance to discover today how WebLogic could fit your needs and sustain your global IT middleware strategy, no matter if your strategy are completely based on the Cloud or not.

  Read the article

• Monitor your Hard Drive’s Health with Acronis Drive Monitor

  - by Matthew Guay

  Are you worried that your computer’s hard drive could die without any warning?  Here’s how you can keep tabs on it and get the first warning signs of potential problems before you actually lose your critical data. Hard drive failures are one of the most common ways people lose important data from their computers.  As more of our memories and important documents are stored digitally, a hard drive failure can mean the loss of years of work.  Acronis Drive Monitor helps you avert these disasters by warning you at the first signs your hard drive may be having trouble.  It monitors many indicators, including heat, read/write errors, total lifespan, and more. It then notifies you via a taskbar popup or email that problems have been detected.  This early warning lets you know ahead of time that you may need to purchase a new hard drive and migrate your data before it’s too late. Getting Started Head over to the Acronis site to download Drive Monitor (link below).  You’ll need to enter your name and email, and then you can download this free tool. Also, note that the download page may ask if you want to include a trial of their for-pay backup program.  If you wish to simply install the Drive Monitor utility, click Continue without adding. Run the installer when the download is finished.  Follow the prompts and install as normal. Once it’s installed, you can quickly get an overview of your hard drives’ health.  Note that it shows 3 categories: Disk problems, Acronis backup, and Critical Events.  On our computer, we had Seagate DiskWizard, an image backup utility based on Acronis Backup, installed, and Acronis detected it. Drive Monitor stays running in your tray even when the application window is closed.  It will keep monitoring your hard drives, and will alert you if there’s a problem. Find Detailed Information About Your Hard Drives Acronis’ simple interface lets you quickly see an overview of how the drives on your computer are performing.  If you’d like more information, click the link under the description.  Here we see that one of our drives have overheated, so click Show disks to get more information. Now you can select each of your drives and see more information about them.  From the Disk overview tab that opens by default, we see that our drive is being monitored, has been running for a total of 368 days, and that it’s health is good.  However, it is running at 113F, which is over the recommended max of 107F.   The S.M.A.R.T. parameters tab gives us more detailed information about our drive.  Most users wouldn’t know what an accepted value would be, so it also shows the status.  If the value is within the accepted parameters, it will report OK; otherwise, it will show that has a problem in this area. One very interesting piece of information we can see is the total number of Power-On Hours, Start/Stop Count, and Power Cycle Count.  These could be useful indicators to check if you’re considering purchasing a second hand computer.  Simply load this program, and you’ll get a better view of how long it’s been in use. Finally, the Events tab shows each time the program gave a warning.  We can see that our drive, which had been acting flaky already, is routinely overheating even when our other hard drive was running in normal temperature ranges. Monitor Acronis Backups And Critical Errors In addition to monitoring critical stats of your hard drives, Acronis Drive Monitor also keeps up with the status of your backup software and critical events reported by Windows.  You can access these from the front page, or via the links on the left hand sidebar.  If you have any edition of any Acronis Backup product installed, it will show that it was detected.  Note that it can only monitor the backup status of the newest versions of Acronis Backup and True Image. If no Acronis backup software was installed, it will show a warning that the drive may be unprotected and will give you a link to download Acronis backup software.   If you have another backup utility installed that you wish to monitor yourself, click Configure backup monitoring, and then disable monitoring on the drives you’re monitoring yourself. Finally, you can view any detected Critical events from the Critical events tab on the left. Get Emailed When There’s a Problem One of Drive Monitor’s best features is the ability to send you an email whenever there’s a problem.  Since this program can run on any version of Windows, including the Server and Home Server editions, you can use this feature to stay on top of your hard drives’ health even when you’re not nearby.  To set this up, click Options in the top left corner. Select Alerts on the left, and then click the Change settings link to setup your email account. Enter the email address which you wish to receive alerts, and a name for the program.  Then, enter the outgoing mail server settings for your email.  If you have a Gmail account, enter the following information: Outgoing mail server (SMTP): smtp.gmail.com Port: 587 Username and Password: Your gmail address and password Check the Use encryption box, and then select TLS from the encryption options.   It will now send a test message to your email account, so check and make sure it sent ok. Now you can choose to have the program automatically email you when warnings and critical alerts appear, and also to have it send regular disk status reports.   Conclusion Whether you’ve got a brand new hard drive or one that’s seen better days, knowing the real health of your it is one of the best ways to be prepared before disaster strikes.  It’s no substitute for regular backups, but can help you avert problems.  Acronis Drive Monitor is a nice tool for this, and although we wish it wasn’t so centered around their backup offerings, we still found it a nice tool. Link Download Acronis Drive Monitor (registration required) Similar Articles Productive Geek Tips Quick Tip: Change Monitor Timeout From Command LineAnalyze and Manage Hard Drive Space with WinDirStatMonitor CPU, Memory, and Disk IO In Windows 7 with Taskbar MetersDefrag Multiple Hard Drives At Once In WindowsFind Your Missing USB Drive on Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician TubeSort: YouTube Playlist Organizer

  Read the article

• Web Site Performance and Assembly Versioning – Part 3 Versioning Combined Files Using Mercurial

  - by capgpilk

  Minification and Concatination of JavaScript and CSS Files Versioning Combined Files Using Subversion Versioning Combined Files Using Mercurial – this post I have worked on a project recently where there was a need to version the system (library dll, css and javascript files) by date and Mercurial revision number. This was in the format:- 0.12.524.407 {major}.{year}.{month}{date}.{mercurial revision} Each time there is an internal build using the CI server, it would label the files using this format. When it came time to do a major release, it became v1.{year}.{month}{date}.{mercurial revision}, with each public release having a major version increment. Also as a requirement, each assembly also had to have a new GUID on each build. So like in previous posts, we need to edit the csproj file, and add a couple of Default targets. 1: <?xml version="1.0" encoding="utf-8"?> 2: <Project ToolsVersion="4.0" DefaultTargets="Hg-Revision;AssemblyInfo;Build" 3: xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> 4: <PropertyGroup> Right below the closing tag of the entire project we add our two targets, the first is to get the Mercurial revision number. We first need to import the tasks for MSBuild which can be downloaded from http://msbuildhg.codeplex.com/ 1: <Import Project="..\Tools\MSBuild.Mercurial\MSBuild.Mercurial.Tasks" />   1: <Target Name="Hg-Revision"> 2: <HgVersion LocalPath="$(MSBuildProjectDirectory)" Timeout="5000" 3: LibraryLocation="C:\TortoiseHg\"> 4: <Output TaskParameter="Revision" PropertyName="Revision" /> 5: </HgVersion> 6: <Message Text="Last revision from HG: $(Revision)" /> 7: </Target> With the main Mercurial files being located at c:\TortoiseHg To get a valid GUID we need to escape from the csproj markup and call some c# code which we put in a property group for later reference. 1: <PropertyGroup> 2: <GuidGenFunction> 3: <![CDATA[ 4: public static string ScriptMain() { 5: return System.Guid.NewGuid().ToString().ToUpper(); 6: } 7: ]]> 8: </GuidGenFunction> 9: </PropertyGroup> Now we add in our target for generating the GUID. 1: <Target Name="AssemblyInfo"> 2: <Script Language="C#" Code="$(GuidGenFunction)"> 3: <Output TaskParameter="ReturnValue" PropertyName="NewGuid" /> 4: </Script> 5: <Time Format="yy"> 6: <Output TaskParameter="FormattedTime" PropertyName="year" /> 7: </Time> 8: <Time Format="Mdd"> 9: <Output TaskParameter="FormattedTime" PropertyName="daymonth" /> 10: </Time> 11: <AssemblyInfo CodeLanguage="CS" OutputFile="Properties\AssemblyInfo.cs" 12: AssemblyTitle="name" AssemblyDescription="description" 13: AssemblyCompany="none" AssemblyProduct="product" 14: AssemblyCopyright="Copyright ©" 15: ComVisible="false" CLSCompliant="true" Guid="$(NewGuid)" 16: AssemblyVersion="$(Major).$(year).$(daymonth).$(Revision)" 17: AssemblyFileVersion="$(Major).$(year).$(daymonth).$(Revision)" /> 18: </Target> So this will give use an AssemblyInfo.cs file like this just prior to calling the Build task:- 1: using System; 2: using System.Reflection; 3: using System.Runtime.CompilerServices; 4: using System.Runtime.InteropServices; 5:  6: [assembly: AssemblyTitle("name")] 7: [assembly: AssemblyDescription("description")] 8: [assembly: AssemblyCompany("none")] 9: [assembly: AssemblyProduct("product")] 10: [assembly: AssemblyCopyright("Copyright ©")] 11: [assembly: ComVisible(false)] 12: [assembly: CLSCompliant(true)] 13: [assembly: Guid("9C2C130E-40EF-4A20-B7AC-A23BA4B5F2B7")] 14: [assembly: AssemblyVersion("0.12.524.407")] 15: [assembly: AssemblyFileVersion("0.12.524.407")] Therefore giving us the correct version for the assembly. This can be referenced within your project whether web or Windows based like this:- 1: public static string AppVersion() 2: { 3: return Assembly.GetExecutingAssembly().GetName().Version.ToString(); 4: } As mentioned in previous posts in this series, you can label css and javascript files using this version number and the GetAssemblyIdentity task from the main MSBuild task library build into the .Net framework. 1: <GetAssemblyIdentity AssemblyFiles="bin\TheAssemblyFile.dll"> 2: <Output TaskParameter="Assemblies" ItemName="MyAssemblyIdentities" /> 3: </GetAssemblyIdentity> Then use this to write out the files:- 1: <WriteLinestoFile 2: File="Client\site-style-%(MyAssemblyIdentities.Version).combined.min.css" 3: Lines="@(CSSLinesSite)" Overwrite="true" />

  Read the article

• bluetooth not working on Ubuntu 13.10

  - by iacopo

  I upgrated ubuntu from 13.4 to 13.10 and my bluetooth stopped working. When I open bluetooth I'm able to put it ON but the visibility doesn't show anything and didn't detect any device. when I: dmesg | grep Blue [ 2.046249] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.046252] usb 3-1: Manufacturer: Bluetooth v2.0 [ 15.255710] Bluetooth: Core ver 2.16 [ 15.255748] Bluetooth: HCI device and connection manager initialized [ 15.255759] Bluetooth: HCI socket layer initialized [ 15.255765] Bluetooth: L2CAP socket layer initialized [ 15.255776] Bluetooth: SCO socket layer initialized [ 20.110379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.110386] Bluetooth: BNEP filters: protocol multicast [ 20.110400] Bluetooth: BNEP socket layer initialized [ 20.120635] Bluetooth: RFCOMM TTY layer initialized [ 20.120656] Bluetooth: RFCOMM socket layer initialized [ 20.120660] Bluetooth: RFCOMM ver 1.11 when I digit: lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0bc2:2300 Seagate RSS LLC Expansion Portable Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 0e6a:6001 Megawin Technology Co., Ltd GEMBIRD Flexible keyboard KB-109F-B-DE Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 13ee:0001 MosArt Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub when I: hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1B:10:00:2A:EC ACL MTU: 1017:8 SCO MTU: 64:0 DOWN RX bytes:457 acl:0 sco:0 events:16 errors:0 TX bytes:68 acl:0 sco:0 commands:16 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT when I digit: rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no when I digit: sudo gedit /etc/bluetooth/main.conf [General] # List of plugins that should not be loaded on bluetoothd startup #DisablePlugins = network,input # Default adaper name # %h - substituted for hostname # %d - substituted for adapter id Name = %h-%d # Default device class. Only the major and minor device class bits are # considered. Class = 0x000100 # How long to stay in discoverable mode before going back to non-discoverable # The value is in seconds. Default is 180, i.e. 3 minutes. # 0 = disable timer, i.e. stay discoverable forever DiscoverableTimeout = 0 # How long to stay in pairable mode before going back to non-discoverable # The value is in seconds. Default is 0. # 0 = disable timer, i.e. stay pairable forever PairableTimeout = 0 # Use some other page timeout than the controller default one # which is 16384 (10 seconds). PageTimeout = 8192 # Automatic connection for bonded devices driven by platform/user events. # If a platform plugin uses this mechanism, automatic connections will be # enabled during the interval defined below. Initially, this feature # intends to be used to establish connections to ATT channels. AutoConnectTimeout = 60 # What value should be assumed for the adapter Powered property when # SetProperty(Powered, ...) hasn't been called yet. Defaults to true InitiallyPowered = true # Remember the previously stored Powered state when initializing adapters RememberPowered = false # Use vendor id source (assigner), vendor, product and version information for # DID profile support. The values are separated by ":" and assigner, VID, PID # and version. # Possible vendor id source values: bluetooth, usb (defaults to usb) #DeviceID = bluetooth:1234:5678:abcd # Do reverse service discovery for previously unknown devices that connect to # us. This option is really only needed for qualification since the BITE tester # doesn't like us doing reverse SDP for some test cases (though there could in # theory be other useful purposes for this too). Defaults to true. ReverseServiceDiscovery = true # Enable name resolving after inquiry. Set it to 'false' if you don't need # remote devices name and want shorter discovery cycle. Defaults to 'true'. NameResolving = true # Enable runtime persistency of debug link keys. Default is false which # makes debug link keys valid only for the duration of the connection # that they were created for. DebugKeys = false # Enable the GATT functionality. Default is false EnableGatt = false when I digit: dmesg | grep Bluetooth [ 2.013041] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.013049] usb 3-1: Manufacturer: Bluetooth v2.0 [ 13.798293] Bluetooth: Core ver 2.16 [ 13.798338] Bluetooth: HCI device and connection manager initialized [ 13.798352] Bluetooth: HCI socket layer initialized [ 13.798357] Bluetooth: L2CAP socket layer initialized [ 13.798368] Bluetooth: SCO socket layer initialized [ 20.184162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.184173] Bluetooth: BNEP filters: protocol multicast [ 20.184197] Bluetooth: BNEP socket layer initialized [ 20.238947] Bluetooth: RFCOMM TTY layer initialized [ 20.238983] Bluetooth: RFCOMM socket layer initialized [ 20.239018] Bluetooth: RFCOMM ver 1.11 When I digit: uname -a Linux casa-desktop 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux When I digit: lsmod Module Size Used by parport_pc 32701 0 rfcomm 69070 4 bnep 19564 2 ppdev 17671 0 ip6t_REJECT 12910 1 xt_hl 12521 6 ip6t_rt 13507 3 nf_conntrack_ipv6 18938 9 nf_defrag_ipv6 34616 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17718 8 xt_limit 12711 11 xt_tcpudp 12884 32 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 9 nf_defrag_ipv4 12729 1 nf_conntrack_ipv4 xt_conntrack 12760 18 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12741 0 nf_nat 26653 1 nf_nat_ftp kvm_amd 59958 0 nf_conntrack_ftp 18608 1 nf_nat_ftp kvm 431315 1 kvm_amd nf_conntrack 91736 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ip_tables 27239 1 iptable_filter snd_hda_codec_realtek 55704 1 ghash_clmulni_intel 13259 0 aesni_intel 55624 0 aes_x86_64 17131 1 aesni_intel snd_hda_codec_hdmi 41117 1 x_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT lrw 13257 1 aesni_intel snd_hda_intel 48171 5 gf128mul 14951 1 lrw glue_helper 13990 1 aesni_intel ablk_helper 13597 1 aesni_intel joydev 17377 0 cryptd 20329 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hda_codec 188738 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel arc4 12608 2 snd_hwdep 13602 1 snd_hda_codec rt2800pci 18690 0 snd_pcm 102033 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel radeon 1402449 3 rt2800lib 79963 1 rt2800pci btusb 28267 0 rt2x00pci 13287 1 rt2800pci rt2x00mmio 13603 1 rt2800pci snd_page_alloc 18710 2 snd_pcm,snd_hda_intel rt2x00lib 55238 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio snd_seq_midi 13324 0 mac80211 596969 3 rt2x00lib,rt2x00pci,rt2800lib snd_seq_midi_event 14899 1 snd_seq_midi ttm 83995 1 radeon snd_rawmidi 30095 1 snd_seq_midi cfg80211 479757 2 mac80211,rt2x00lib drm_kms_helper 52651 1 radeon snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi bluetooth 371880 12 bnep,btusb,rfcomm microcode 23518 0 eeprom_93cx6 13344 1 rt2800pci snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi crc_ccitt 12707 1 rt2800lib snd_timer 29433 2 snd_pcm,snd_seq snd 69141 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi psmouse 97626 0 drm 296739 5 ttm,drm_kms_helper,radeon k10temp 13126 0 soundcore 12680 1 snd serio_raw 13413 0 i2c_algo_bit 13413 1 radeon i2c_piix4 22106 0 video 19318 0 mac_hid 13205 0 lp 17759 0 parport 42299 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 53014 0 hid 105818 2 hid_generic,usbhid pata_acpi 13038 0 usb_storage 62062 1 r8169 67341 0 sdhci_pci 18985 0 sdhci 42630 1 sdhci_pci mii 13934 1 r8169 pata_atiixp 13242 0 ohci_pci 13561 0 ahci 25819 2 libahci 31898 1 ahci Someone can help me?

  Read the article

• C# Extension Methods - To Extend or Not To Extend...

  - by James Michael Hare

  I've been thinking a lot about extension methods lately, and I must admit I both love them and hate them. They are a lot like sugar, they taste so nice and sweet, but they'll rot your teeth if you eat them too much.   I can't deny that they aren't useful and very handy. One of the major components of the Shared Component library where I work is a set of useful extension methods. But, I also can't deny that they tend to be overused and abused to willy-nilly extend every living type.   So what constitutes a good extension method? Obviously, you can write an extension method for nearly anything whether it is a good idea or not. Many times, in fact, an idea seems like a good extension method but in retrospect really doesn't fit.   So what's the litmus test? To me, an extension method should be like in the movies when a person runs into their twin, separated at birth. You just know you're related. Obviously, that's hard to quantify, so let's try to put a few rules-of-thumb around them.   A good extension method should:     Apply to any possible instance of the type it extends.     Simplify logic and improve readability/maintainability.     Apply to the most specific type or interface applicable.     Be isolated in a namespace so that it does not pollute IntelliSense.     So let's look at a few examples in relation to these rules.   The first rule, to me, is the most important of all. Once again, it bears repeating, a good extension method should apply to all possible instances of the type it extends. It should feel like the long lost relative that should have been included in the original class but somehow was missing from the family tree.    Take this nifty little int extension, I saw this once in a blog and at first I really thought it was pretty cool, but then I started noticing a code smell I couldn't quite put my finger on. So let's look:       public static class IntExtensinos     {         public static int Seconds(int num)         {             return num * 1000;         }           public static int Minutes(int num)         {             return num * 60000;         }     }     This is so you could do things like:       ...     Thread.Sleep(5.Seconds());     ...     proxy.Timeout = 1.Minutes();     ...     Awww, you say, that's cute! Well, that's the problem, it's kitschy and it doesn't always apply (and incidentally you could achieve the same thing with TimeStamp.FromSeconds(5)). It's syntactical candy that looks cool, but tends to rot and pollute the code. It would allow things like:       total += numberOfTodaysOrders.Seconds();     which makes no sense and should never be allowed. The problem is you're applying an extension method to a logical domain, not a type domain. That is, the extension method Seconds() doesn't really apply to ALL ints, it applies to ints that are representative of time that you want to convert to milliseconds.    Do you see what I mean? The two problems, in a nutshell, are that a) Seconds() called off a non-time value makes no sense and b) calling Seconds() off something to pass to something that does not take milliseconds will be off by a factor of 1000 or worse.   Thus, in my mind, you should only ever have an extension method that applies to the whole domain of that type.   For example, this is one of my personal favorites:       public static bool IsBetween<T>(this T value, T low, T high)         where T : IComparable<T>     {         return value.CompareTo(low) >= 0 && value.CompareTo(high) <= 0;     }   This allows you to check if any IComparable<T> is within an upper and lower bound. Think of how many times you type something like:       if (response.Employee.Address.YearsAt >= 2         && response.Employee.Address.YearsAt <= 10)     {     ...     }     Now, you can instead type:       if(response.Employee.Address.YearsAt.IsBetween(2, 10))     {     ...     }     Note that this applies to all IComparable<T> -- that's ints, chars, strings, DateTime, etc -- and does not depend on any logical domain. In addition, it satisfies the second point and actually makes the code more readable and maintainable.   Let's look at the third point. In it we said that an extension method should fit the most specific interface or type possible. Now, I'm not saying if you have something that applies to enumerables, you create an extension for List, Array, Dictionary, etc (though you may have reasons for doing so), but that you should beware of making things TOO general.   For example, let's say we had an extension method like this:       public static T ConvertTo<T>(this object value)     {         return (T)Convert.ChangeType(value, typeof(T));     }         This lets you do more fluent conversions like:       double d = "5.0".ConvertTo<double>();     However, if you dig into Reflector (LOVE that tool) you will see that if the type you are calling on does not implement IConvertible, what you convert to MUST be the exact type or it will throw an InvalidCastException. Now this may or may not be what you want in this situation, and I leave that up to you. Things like this would fail:       object value = new Employee();     ...     // class cast exception because typeof(IEmployee) != typeof(Employee)     IEmployee emp = value.ConvertTo<IEmployee>();       Yes, that's a downfall of working with Convertible in general, but if you wanted your fluent interface to be more type-safe so that ConvertTo were only callable on IConvertibles (and let casting be a manual task), you could easily make it:         public static T ConvertTo<T>(this IConvertible value)     {         return (T)Convert.ChangeType(value, typeof(T));     }         This is what I mean by choosing the best type to extend. Consider that if we used the previous (object) version, every time we typed a dot ('.') on an instance we'd pull up ConvertTo() whether it was applicable or not. By filtering our extension method down to only valid types (those that implement IConvertible) we greatly reduce our IntelliSense pollution and apply a good level of compile-time correctness.   Now my fourth rule is just my general rule-of-thumb. Obviously, you can make extension methods as in-your-face as you want. I included all mine in my work libraries in its own sub-namespace, something akin to:       namespace Shared.Core.Extensions { ... }     This is in a library called Shared.Core, so just referencing the Core library doesn't pollute your IntelliSense, you have to actually do a using on Shared.Core.Extensions to bring the methods in. This is very similar to the way Microsoft puts its extension methods in System.Linq. This way, if you want 'em, you use the appropriate namespace. If you don't want 'em, they won't pollute your namespace.   To really make this work, however, that namespace should only include extension methods and subordinate types those extensions themselves may use. If you plant other useful classes in those namespaces, once a user includes it, they get all the extensions too.   Also, just as a personal preference, extension methods that aren't simply syntactical shortcuts, I like to put in a static utility class and then have extension methods for syntactical candy. For instance, I think it imaginable that any object could be converted to XML:       namespace Shared.Core     {         // A collection of XML Utility classes         public static class XmlUtility         {             ...             // Serialize an object into an xml string             public static string ToXml(object input)             {                 var xs = new XmlSerializer(input.GetType());                   // use new UTF8Encoding here, not Encoding.UTF8. The later includes                 // the BOM which screws up subsequent reads, the former does not.                 using (var memoryStream = new MemoryStream())                 using (var xmlTextWriter = new XmlTextWriter(memoryStream, new UTF8Encoding()))                 {                     xs.Serialize(xmlTextWriter, input);                     return Encoding.UTF8.GetString(memoryStream.ToArray());                 }             }             ...         }     }   I also wanted to be able to call this from an object like:       value.ToXml();     But here's the problem, if i made this an extension method from the start with that one little keyword "this", it would pop into IntelliSense for all objects which could be very polluting. Instead, I put the logic into a utility class so that users have the choice of whether or not they want to use it as just a class and not pollute IntelliSense, then in my extensions namespace, I add the syntactical candy:       namespace Shared.Core.Extensions     {         public static class XmlExtensions         {             public static string ToXml(this object value)             {                 return XmlUtility.ToXml(value);             }         }     }   So now it's the best of both worlds. On one hand, they can use the utility class if they don't want to pollute IntelliSense, and on the other hand they can include the Extensions namespace and use as an extension if they want. The neat thing is it also adheres to the Single Responsibility Principle. The XmlUtility is responsible for converting objects to XML, and the XmlExtensions is responsible for extending object's interface for ToXml().

  Read the article

• A New Threat To Web Applications: Connection String Parameter Pollution (CSPP)

  - by eric.maurice

  Hi, this is Shaomin Wang. I am a security analyst in Oracle's Security Alerts Group. My primary responsibility is to evaluate the security vulnerabilities reported externally by security researchers on Oracle Fusion Middleware and to ensure timely resolution through the Critical Patch Update. Today, I am going to talk about a serious type of attack: Connection String Parameter Pollution (CSPP). Earlier this year, at the Black Hat DC 2010 Conference, two Spanish security researchers, Jose Palazon and Chema Alonso, unveiled a new class of security vulnerabilities, which target insecure dynamic connections between web applications and databases. The attack called Connection String Parameter Pollution (CSPP) exploits specifically the semicolon delimited database connection strings that are constructed dynamically based on the user inputs from web applications. CSPP, if carried out successfully, can be used to steal user identities and hijack web credentials. CSPP is a high risk attack because of the relative ease with which it can be carried out (low access complexity) and the potential results it can have (high impact). In today's blog, we are going to first look at what connection strings are and then review the different ways connection string injections can be leveraged by malicious hackers. We will then discuss how CSPP differs from traditional connection string injection, and the measures organizations can take to prevent this kind of attacks. In web applications, a connection string is a set of values that specifies information to connect to backend data repositories, in most cases, databases. The connection string is passed to a provider or driver to initiate a connection. Vendors or manufacturers write their own providers for different databases. Since there are many different providers and each provider has multiple ways to make a connection, there are many different ways to write a connection string. Here are some examples of connection strings from Oracle Data Provider for .Net/ODP.Net: Oracle Data Provider for .Net / ODP.Net; Manufacturer: Oracle; Type: .NET Framework Class Library: - Using TNS Data Source = orcl; User ID = myUsername; Password = myPassword; - Using integrated security Data Source = orcl; Integrated Security = SSPI; - Using the Easy Connect Naming Method Data Source = username/password@//myserver:1521/my.server.com - Specifying Pooling parameters Data Source=myOracleDB; User Id=myUsername; Password=myPassword; Min Pool Size=10; Connection Lifetime=120; Connection Timeout=60; Incr Pool Size=5; Decr Pool Size=2; There are many variations of the connection strings, but the majority of connection strings are key value pairs delimited by semicolons. Attacks on connection strings are not new (see for example, this SANS White Paper on Securing SQL Connection String). Connection strings are vulnerable to injection attacks when dynamic string concatenation is used to build connection strings based on user input. When the user input is not validated or filtered, and malicious text or characters are not properly escaped, an attacker can potentially access sensitive data or resources. For a number of years now, vendors, including Oracle, have created connection string builder class tools to help developers generate valid connection strings and potentially prevent this kind of vulnerability. Unfortunately, not all application developers use these utilities because they are not aware of the danger posed by this kind of attacks. So how are Connection String parameter Pollution (CSPP) attacks different from traditional Connection String Injection attacks? First, let's look at what parameter pollution attacks are. Parameter pollution is a technique, which typically involves appending repeating parameters to the request strings to attack the receiving end. Much of the public attention around parameter pollution was initiated as a result of a presentation on HTTP Parameter Pollution attacks by Stefano Di Paola and Luca Carettoni delivered at the 2009 Appsec OWASP Conference in Poland. In HTTP Parameter Pollution attacks, an attacker submits additional parameters in HTTP GET/POST to a web application, and if these parameters have the same name as an existing parameter, the web application may react in different ways depends on how the web application and web server deal with multiple parameters with the same name. When applied to connections strings, the rule for the majority of database providers is the "last one wins" algorithm. If a KEYWORD=VALUE pair occurs more than once in the connection string, the value associated with the LAST occurrence is used. This opens the door to some serious attacks. By way of example, in a web application, a user enters username and password; a subsequent connection string is generated to connect to the back end database. Data Source = myDataSource; Initial Catalog = db; Integrated Security = no; User ID = myUsername; Password = XXX; In the password field, if the attacker enters "xxx; Integrated Security = true", the connection string becomes, Data Source = myDataSource; Initial Catalog = db; Integrated Security = no; User ID = myUsername; Password = XXX; Intergrated Security = true; Under the "last one wins" principle, the web application will then try to connect to the database using the operating system account under which the application is running to bypass normal authentication. CSPP poses serious risks for unprepared organizations. It can be particularly dangerous if an Enterprise Systems Management web front-end is compromised, because attackers can then gain access to control panels to configure databases, systems accounts, etc. Fortunately, organizations can take steps to prevent this kind of attacks. CSPP falls into the Injection category of attacks like Cross Site Scripting or SQL Injection, which are made possible when inputs from users are not properly escaped or sanitized. Escaping is a technique used to ensure that characters (mostly from user inputs) are treated as data, not as characters, that is relevant to the interpreter's parser. Software developers need to become aware of the danger of these attacks and learn about the defenses mechanism they need to introduce in their code. As well, software vendors need to provide templates or classes to facilitate coding and eliminate developers' guesswork for protecting against such vulnerabilities. Oracle has introduced the OracleConnectionStringBuilder class in Oracle Data Provider for .NET. Using this class, developers can employ a configuration file to provide the connection string and/or dynamically set the values through key/value pairs. It makes creating connection strings less error-prone and easier to manager, and ultimately using the OracleConnectionStringBuilder class provides better security against injection into connection strings. For More Information: - The OracleConnectionStringBuilder is located at http://download.oracle.com/docs/cd/B28359_01/win.111/b28375/OracleConnectionStringBuilderClass.htm - Oracle has developed a publicly available course on preventing SQL Injections. The Server Technologies Curriculum course "Defending Against SQL Injection Attacks!" is located at http://st-curriculum.oracle.com/tutorial/SQLInjection/index.htm - The OWASP web site also provides a number of useful resources. It is located at http://www.owasp.org/index.php/Main_Page

  Read the article

• No root file system is defined error after installation

  - by LearnCode

  I installed ubuntu through Wubi and once i rebooted I get no root file system defined error. here's the output of the boot_info_script.Could anyone point me out where the error is. Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe /ntldr /ntdetect.com /wubildr /ubuntu/winboot/wubildr /wubildr.mbr /ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk /ubuntu/disks/swap.disk sda1/Wubi: _____________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' sda2: __________________________________________________________________________ File system: vfat Boot sector type: Unknown Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /boot.ini /ntldr /NTDETECT.COM sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 240 heads, 63 sectors/track, 20673 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 301,250,879 301,250,817 7 NTFS / exFAT / HPFS /dev/sda2 301,250,943 312,575,759 11,324,817 c W95 FAT32 (LBA) GUID Partition Table detected, but does not seem to be used. Partition Start Sector End Sector # of Sectors System /dev/sda1 323,465,741,313,502,988275,962,973,585-323,465,465,350,529,402 - /dev/sda2 242,728,591,638,290,720578,721,383,108,845,578335,992,791,470,554,859 - /dev/sda3 1,827,498,311,425,204,2562,091,935,274,843,009,907264,436,963,417,805,652 - /dev/sda4 579,711,218,081,401,3572,006,665,459,744,645,1521,426,954,241,663,243,796 - /dev/sda11 270,286,346,402,038,1183,786,543,326,404,525,9543,516,256,980,002,487,837 - /dev/sda12 4,179,681,002,230,769,6684,179,389,374,010,033,387-291,628,220,736,280 - /dev/sda13 232,556,480,979,456,1311,160,152,593,793,119,235927,596,112,813,663,105 - /dev/sda14 98,342,784,050,266,9183,691,264,578,843,725,1953,592,921,794,793,458,278 - /dev/sda15 2,307,845,219,957,882,4961,850,841,032,955,276,350-457,004,187,002,606,145 - /dev/sda16 512,592,046,878,946,497368,458,231,024,779,444-144,133,815,854,167,052 - /dev/sda17 2,504,135,232,870,384,3923,665,087,872,719,320,8291,160,952,639,848,936,438 - /dev/sda18 3,783,181,605,270,691,304122,034,509,624,708,942-3,661,147,095,645,982,361 - /dev/sda19 3,519,661,520,275,829,5122,376,243,094,723,723,587-1,143,418,425,552,105,924 - /dev/sda20 3,867,920,076,859,0744,494,691,111,933,625,1044,490,823,191,856,766,031 - /dev/sda21 1,500,144,061,909,253,7612,511,182,033,846,676,3401,011,037,971,937,422,580 - /dev/sda22 13,035,625,499,900,0062,360,168,613,941,394,9472,347,132,988,441,494,942 - /dev/sda23 4,228,978,682,068,599,48813,159,423,631,648,263-4,215,819,258,436,951,224 - /dev/sda24 3,695,955,742,872,046,9084,561,928,726,501,845,776865,972,983,629,798,869 - /dev/sda25 1,297,460,286,683,948,0461,444,350,486,339,417,957146,890,199,655,469,912 - /dev/sda26 1,228,858,248,533,131,831 0-1,228,858,248,533,131,830 - /dev/sda121 3,189,184,846,146,487,1461,849,820,258,006,914,852-1,339,364,588,139,572,293 - /dev/sda122 1,226,215,547,991,800,578389,781,518,734,546,300-836,434,029,257,254,277 - /dev/sda123 3,851,660,168,574,583,4654,046,215,657,583,031,556194,555,489,008,448,092 - /dev/sda124 1,197,460,980,174,153,341699,103,965,005,093,246-498,357,015,169,060,094 - Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 750.2 GB, 750153367552 bytes 255 heads, 63 sectors/track, 91200 cylinders, total 1465143296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 1,465,143,295 1,465,141,248 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 iso9660 Ubuntu 11.04 amd64 /dev/loop1 squashfs /dev/sda1 E814B55B14B52E06 ntfs /dev/sda2 01CD-023B vfat HP_RECOVERY /dev/sdb1 7836F22A36F1E8D0 ntfs Elements ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /cdrom iso9660 (ro,noatime) /dev/loop1 /rofs squashfs (ro,noatime) /dev/sdb1 /mnt fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) ================================ sda2/boot.ini: ================================ -------------------------------------------------------------------------------- [boot loader] timeout=0 default=C:\CMDCONS\BOOTSECT.DAT [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons -------------------------------------------------------------------------------- ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown GPT Partiton Type c104043000e9b9040dff24b580010100 Unknown GPT Partiton Type 46313020746f20737461727420746865 Unknown GPT Partiton Type 65727920706172746974696f6e207761 Unknown GPT Partiton Type 727920706172746974696f6e0d0a0000 Unknown GPT Partiton Type 000f84e5f7668b162404e82804744066 Unknown GPT Partiton Type ce01e8dc038bfe66391624047505e8d9 Unknown GPT Partiton Type 0345086603f0e881030bd2740333d240 Unknown GPT Partiton Type bece01e8db0287fec645041266895508 Unknown GPT Partiton Type 01f60634010175078b363b01e854f5e8 Unknown GPT Partiton Type 313825740ffec03865107408fec03824 Unknown GPT Partiton Type 02f60634014074088bfdbece01e85101 Unknown GPT Partiton Type 263401f9e894f30f858ef4e8e201e8ec Unknown GPT Partiton Type f7e960f35245434f5645525966606633 Unknown GPT Partiton Type 660faf1e00106603dac3668b0e001066 Unknown GPT Partiton Type 8bfd386d04740583c710e2f6c36660c6 Unknown GPT Partiton Type 04ebf132c0b91000f3aac3bf0c04ebf3 Unknown GPT Partiton Type 02662bc1660fb71e0e02662bc366031e Unknown GPT Partiton Type f4b40ebb0700b901003c08751381ff25 Unknown GPT Partiton Type 534f465448494e4b90653f62011b0100 Unknown GPT Partiton Type 0b050900027777772e68702e636f6d00 Unknown GPT Partiton Type d441a0f5030003000ecb744a08bb3746 Unknown GPT Partiton Type f8579a116b4a7aa931cde97a4b9b5c09 Unknown GPT Partiton Type 7229990415b77c0a1970e7e824237a3a Unknown GPT Partiton Type afb6e34d6b4bd8c7c0eada19a9786cc3 Unknown BootLoader on sda1/Wubi 00000000 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 |0000000000000000| * 00000200 Unknown BootLoader on sda2 00000000 e9 a7 00 52 45 43 4f 56 45 52 59 00 02 08 20 00 |...RECOVERY... .| 00000010 02 00 00 00 00 f8 00 00 3f 00 f0 00 7f b9 f4 11 |........?.......| 00000020 8c cd ac 00 1e 2b 00 00 00 00 00 00 02 00 00 00 |.....+..........| 00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000040 80 00 29 3b 02 cd 01 20 20 20 20 20 20 20 20 20 |..);... | 00000050 20 20 46 41 54 33 32 20 20 20 8b d0 c1 e2 02 80 | FAT32 ......| 00000060 e6 01 66 c1 e8 07 66 3b 46 f8 74 2a 66 89 46 f8 |..f...f;F.t*f.F.| 00000070 66 03 46 f4 66 0f b6 5e 28 80 e3 0f 74 0f 3a 5e |f.F.f..^(...t.:^| 00000080 10 0f 83 90 00 66 0f af 5e 24 66 03 c3 bb e0 07 |.....f..^$f.....| 00000090 b9 01 00 e8 cf 00 8b da 66 8b 87 00 7e 66 25 ff |........f...~f%.| 000000a0 ff ff 0f 66 3d f8 ff ff 0f c3 33 c9 8e d9 8e c1 |...f=.....3.....| 000000b0 8e d1 66 bc f4 7b 00 00 bd 00 7c 66 0f b6 46 10 |..f..{....|f..F.| 000000c0 66 f7 66 24 66 0f b7 56 0e 66 03 56 1c 66 89 56 |f.f$f..V.f.V.f.V| 000000d0 f4 66 03 c2 66 89 46 fc 66 c7 46 f8 ff ff ff ff |.f..f.F.f.F.....| 000000e0 66 8b 46 2c 66 50 e8 af 00 bb 70 00 b9 01 00 e8 |f.F,fP....p.....| 000000f0 73 00 bf 00 07 b1 0b be a9 7d f3 a6 74 2a 03 f9 |s........}..t*..| 00000100 83 c7 15 81 ff 00 09 72 ec 66 40 4a 75 db 66 58 |[email protected]| 00000110 e8 47 ff 72 cf be b4 7d ac 84 c0 74 09 b4 0e bb |.G.r...}...t....| 00000120 07 00 cd 10 eb f2 cd 19 66 58 ff 75 09 ff 75 0f |........fX.u..u.| 00000130 66 58 bb 00 20 66 83 f8 02 72 da 66 3d f8 ff ff |fX.. f...r.f=...| 00000140 0f 73 d2 66 50 e8 50 00 0f b6 4e 0d e8 16 00 c1 |.s.fP.P...N.....| 00000150 e1 05 03 d9 66 58 53 e8 00 ff 5b 72 d8 8a 56 40 |....fXS...[r..V@| 00000160 ea 00 00 00 20 66 60 66 6a 00 66 50 53 6a 00 66 |.... f`fj.fPSj.f| 00000170 68 10 00 01 00 8b f4 b8 00 42 8a 56 40 cd 13 be |h........B.V@...| 00000180 c7 7d 72 94 67 83 44 24 06 20 66 67 ff 44 24 08 |.}r.g.D$. fg.D$.| 00000190 e2 e3 83 c4 10 66 61 c3 66 48 66 48 66 0f b6 56 |.....fa.fHfHf..V| 000001a0 0d 66 f7 e2 66 03 46 fc c3 4e 54 4c 44 52 20 20 |.f..f.F..NTLDR | 000001b0 20 20 20 20 0d 0a 4e 6f 20 53 79 73 74 65 6d 20 | ..No System | 000001c0 44 69 73 6b 20 6f 72 0d 0a 44 69 73 6b 20 49 2f |Disk or..Disk I/| 000001d0 4f 20 65 72 72 6f 72 0d 0a 50 72 65 73 73 20 61 |O error..Press a| 000001e0 20 6b 65 79 20 74 6f 20 72 65 73 74 61 72 74 0d | key to restart.| 000001f0 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== umount: /isodevice: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1))

  Read the article

• Neo4J and Azure and VS2012 and Windows 8

  - by Chris Skardon

  Now, I know that this has been written about, but both of the main places (http://www.richard-banks.org/2011/02/running-neo4j-on-azure.html and http://blog.neo4j.org/2011/02/announcing-neo4j-on-windows-azure.html) utilise VS2010, and well, I’m on VS2012 and Windows 8. Not that I think Win 8 had anything to do with it really, anyhews! I’m going to begin from the beginning, this is my first foray into running something on Azure, so it’s been a bit of a learning curve. But luckily the Neo4J guys have got us started, so let’s download the VS2010 solution: http://neo4j.org/get?file=Neo4j.Azure.Server.zip OK, the other thing we’ll need is the VS2012 Azure SDK, so let’s get that as well: http://www.windowsazure.com/en-us/develop/downloads/ (I just did the full install). Now, unzip the VS2010 solution and let’s open it in VS2012: <your location>\Neo4j.Azure.Server\Neo4j.Azure.Server.sln One-way-upgrade? Yer! Ignore the migration report – we don’t care! Let’s build that sucker… Ahhh 14 errors… WindowsAzure does not exist in the namespace ‘Microsoft’ Not a problem right? We’ve installed the SDK, just need to update the references: We can ignore the Test projects, they don’t use Azure, we’re interested in the other projects, so what we’ll do is remove the broken references, and add the correct ones, so expand the references bit of each project: hunt out those yellow exclamation marks, and delete them! You’ll need to add the right ones back in (listed below), when you go to the ‘Add Reference’ dialog make sure you have ‘Assemblies’ and ‘Framework’ selected before you seach (and search for ‘microsoft.win’ to narrow it down) So the references you need for each project are: CollectDiagnosticsData Microsoft.WindowsAzure.Diagnostics Microsoft.WindowsAzure.StorageClient Diversify.WindowsAzure.ServiceRuntime Microsoft.WindowsAzure.CloudDrive Microsoft.WindowsAzure.ServiceRuntime Microsoft.WindowsAzure.StorageClient Right, so let’s build again… Sweet! No errors.   Now we need to setup our Blobs, I’m assuming you are using the most up-to-date Java you happened to have downloaded :) in my case that’s JRE7, and that is located in: C:\Program Files (x86)\Java\jre7 So, zip up that folder into whatever you want to call it, I went with jre7.zip, and stuck it in a temp folder for now. In that same temp folder I also copied the neo4j zip I was using: neo4j-community-1.7.2-windows.zip OK, now, we need to get these into our Blob storage, this is where a lot of stuff becomes unstuck - I didn’t find any applications that helped me use the blob storage, one would crash (because my internet speed is so slow) and the other just didn’t work – sure it looked like it had worked, but when push came to shove it didn’t. So this is how I got my files into Blob (local first): 1. Run the ‘Storage Emulator’ (just search for that in the start menu) 2. That takes a little while to start up so fire up another instance of Visual Studio in the mean time, and create a new Console Application. 3. Manage Nuget Packages for that solution and add ‘Windows Azure Storage’ Now you’re set up to add the code: public static void Main() { CloudStorageAccount cloudStorageAccount = CloudStorageAccount.DevelopmentStorageAccount; CloudBlobClient client = cloudStorageAccount.CreateCloudBlobClient(); client.Timeout = TimeSpan.FromMinutes(30); CloudBlobContainer container = client.GetContainerReference("neo4j"); //This will create it as well   UploadBlob(container, "jre7.zip", "c:\\temp\\jre7.zip"); UploadBlob(container, "neo4j-community-1.7.2-windows.zip", "c:\\temp\\neo4j-community-1.7.2-windows.zip"); }   private static void UploadBlob(CloudBlobContainer container, string blobName, string filename) { CloudBlob blob = container.GetBlobReference(blobName);   using (FileStream fileStream = File.OpenRead(filename)) blob.UploadFromStream(fileStream); } This will upload the files to your local storage account (to switch to an Azure one, you’ll need to create a storage account, and use those credentials when you make your CloudStorageAccount above) To test you’ve got them uploaded correctly, go to: http://localhost:10000/devstoreaccount1/neo4j/jre7.zip and you will hopefully download the zip file you just uploaded. Now that those files are there, we are ready for some final configuration… Right click on the Neo4jServerHost role in the Neo4j.Azure.Server cloud project: Click on the ‘Settings’ tab and we’ll need to do some changes – by default, the 1.7.2 edition of neo4J unzips to: neo4j-community-1.7.2 So, we need to update all the ‘neo4j-1.3.M02’ directories to be ‘neo4j-community-1.7.2’, we also need to update the Java runtime location, so we start with this: and end with this: Now, I also changed the Endpoints settings, to be HTTP (from TCP) and to have a port of 7410 (mainly because that’s straight down on the numpad) The last ‘gotcha’ is some hard coded consts, which had me looking for ages, they are in the ‘ConfigSettings’ class of the ‘Neo4jServerHost’ project, and the ones we’re interested in are: Neo4jFileName JavaZipFileName Change those both to what that should be. OK Nearly there (I promise)! Run the ‘Compute Emulator’ (same deal with the Start menu), in your system tray you should have an Azure icon, when the compute emulator is up and running, right click on the icon and select ‘Show Compute Emulator UI’ The last steps! Make sure the ‘Neo4j.Azure.Server’ cloud project is set up as the start project and let’s hit F5 tension mounts, the build takes place (you need to accept the UAC warning) and VS does it’s stuff. If you look at the Compute Emulator UI you’ll see some log stuff (which you’ll need if this goes awry – but it won’t don’t worry!) In a bit, the console and a Java window will pop up: Then the console will bog off, leaving just the Java one, and if we switch back to the Compute Emulator UI and scroll up we should be able to see a line telling us the port number we’ve been assigned (in my case 7411): (If you can’t see it, don’t worry.. press CTRL+A on the emulator, then CTRL+C, copy all the text and paste it into something like Notepad, then just do a Find for ‘port’ you’ll soon see it) Go to your favourite browser, and head to: http://localhost:YOURPORT/ and you should see the WebAdmin! See you on the cloud side hopefully! Chris PS Other gotchas! OK, I’ve been caught out a couple of times: I had an instance of Neo4J running as a service on my machine, the Azure instance wanted to run the https version of the server on the same port as the Service was running on, and so Java would complain that the port was already in use.. The first time I converted the project, it didn’t update the version of the Azure library to load, in the App.Config of the Neo4jServerHost project, and VS would throw an exception saying it couldn’t find the Azure dll version 1.0.0.0.

  Read the article

• Translating Your Customizations

  - by Richard Bingham

  This blog post explains the basics of translating the customizations you can make to Fusion Applications products, with the inclusion of information for both composer-based customizations and the generic design-time customizations done via JDeveloper. Introduction Like most Oracle Applications, Fusion Applications installs on-premise with a US-English base language that is, in Release 7, supported by the option to add up to a total of 22 additional language packs (In Oracle Cloud production environments languages are pre-installed already). As such many organizations offer their users the option of working with their local language, and logically that should also apply for any customizations as well. Composer-based UI Customizations Customizations made in Page Composer take into consideration the session LOCALE, as set in the user preferences screen, during all customization work, and stores the customization in the MDS repository accordingly. As such the actual new or changed values used will only apply for the same language under which the customization was made, and text for any other languages requires a separate upload. See the Resource Bundles section below, which incidentally also applies to custom UI changes done in JDeveloper. You may have noticed this when you select the “Select Text Resource” menu option when editing the text on a page. Using this ensures that the resource bundles are used, whereas if you define a static value in Expression Builder it will never be available for translation. Notice in the screenshot below the “What’s New” custom value I have already defined using the ‘Select Text Resource’ feature is internally using the adfBundle groovy function to pull the custom value for my key (RT_S_1) from the ComposerOverrideBundle. Figure 1 – Page Composer showing the override bundle being used. Business Objects Customizing the Business Objects available in the Applications Composer tool for the CRM products, such as adding additional fields, also operates using the session language. Translating these additional values for these fields into other installed languages requires loading additional resource bundles, again as described below. Reports and Analytics Most customizations to Reports and BI Analytics are just essentially reorganizations and visualizations of existing number and text data from the system, and as such will use the appropriate values based on the users session language. Where a translated value or string exists for that session language, it will be used without the need for additional work. Extending through the addition of brand new reports and analytics requires another method of loading the translated strings, as part of what is known as ‘Localizing’ the BI Catalog and Metadata. This time it is via an export/import of XML data through the BI Administrators console, and is described in the OBIEE Admin Guide. Fusion Applications reports based on BI Publisher are already defined in template-per-locale, and in addition provide an extra process for getting the data for translation and reloading. This again uses the standard resource bundle format. Loading a custom report is illustrated in this video from our YouTube channel which shows the screen for both setting the template local and running an export for translation. Fusion Applications Menus Whilst the seeded Navigator and Global Menu values are fully translated when the additional language is installed, if they are customized then the change or new menu item will apply universally, not currently per language. This is set to change in a future release with the new UI Text Editor feature described below. More on Resource Bundles As mentioned above, to provide translations for most of your customizations you need to add values to a resource bundle. This is an industry open standard (OASIS) format XML file with the extension .xliff, and store translated values for the strings used by ADF at run-time. The general process is that these values are exported from the MDS repository, manually edited, and then imported back in again.This needs to be done by an administrator, via either WLST commands or through Enterprise Manager as per the screenshot below. This is detailed out in the Fusion Applications Extensibility Guide. For SaaS environments the Cloud Operations team can assist. Figure 2 – Enterprise Manager’s MDS export used getting resource bundles for manual translation and re-imported on the same screen. All customized strings are stored in an override bundle (xliff file) for each locale, suffixed with the language initials, with English ones being saved to the default. As such each language bundle can be easily identified and updated. Similarly if you used JDeveloper to create your own applications as extensions to Fusion Applications you would use the native support for resource bundles, and add them into the faces-config.xml file for inclusion in your application. An example is this ADF customization video from our YouTube channel. JDeveloper also supports automatic synchronization between your underlying resource bundles and any translatable strings you add – very handy. For more information see chapters on “Using Automatic Resource Bundle Integration in JDeveloper” and “Manually Defining Resource Bundles and Locales” in the Oracle Fusion Middleware Web User Interface Developer’s Guide for Oracle Application Development Framework. FND Messages and Look-ups FND Messages, as defined here, are not used for UI labels (they are known as ‘strings’), but are the responses back to users as a result of an action, such as from a page submit. Each ‘message’ is defined and stored in the related database table (FND_MESSAGES_B), with another (FND_MESSAGES_TL) holding any language-specific values. These come seeded with the additional language installs, however if you customize the messages via the “Manage Messages” task in Functional Setup Manager, or add new ones, then currently (in Release 7) you’ll need to repeat it for each language. Figure 3 – An FND Message defined in an English user session. Similarly Look-ups are stored in a translation table (FND_LOOKUP_VALUES_TL) where appropriate, and can be customized by setting the users session language and making the change  in the Setup and Maintenance task entitled “Manage [Standard|Common] Look-ups”. Online Help Yes, in fact all the seeded help is applied as part of each language pack install as part of the post-install provisioning process. If you are editing or adding custom online help then the Create Help screen provides a drop-down of which language your help customization will apply to. This is shown in the video below from our YouTube channel, and obviously you’ll need to it for each language in use. What is Coming for Translations? Currently planned for Release 8 is something called the User Interface (UI) Text Editor. This tool will allow the editing of all the text shown on the pages and forms of Fusion Application. This will provide a search based on a particular term or word, say “Worker”, and will allow it to be adjusted, say to “Employee”, which then updates all the Resource Bundles that contain it. In the case of multi-language environments, it will use the users session language (locale) to know which Resource Bundles to apply the change to. This capability will also support customization sandboxes, to help ensure changes can be tested and approved.  It is also interesting to note that the design currently allows any page-specific customizations done using Page Composer or Application Composer to over-write the global changes done via the UI Text Editor, allowing for special context-sensitive values to still be used. Further Reading and Resources The following short list provides the mains resources for digging into more detail on translation support for both Composer and JDeveloper customization projects. There is a dedicated chapter entitled “Translating Custom Text” in the Fusion Applications Extensibility Guide. This has good examples and steps for many tasks, especially administering resource bundles. Using localization formatting (numbers, dates etc) for design-time changes is well documented in the Fusion Applications Developer Guide. For more guidelines on general design-time globalization, see either the ‘Internationalizing and Localizing Pages’ chapter in the Oracle Fusion Middleware Web User Interface Developer’s Guide for Oracle Application Development Framework (Oracle Fusion Applications Edition) or the general Oracle Database Globalization Support Guide. The Oracle Architecture ‘A-Team’ provided a recent post on customizing the user session timeout popup, using design-time changes to resource bundles. It has detailed step-by-step examples which can be a useful illustration.

  Read the article

• DTracing TCP congestion control

  - by user12820842

  In a previous post, I showed how we can use DTrace to probe TCP receive and send window events. TCP receive and send windows are in effect both about flow-controlling how much data can be received - the receive window reflects how much data the local TCP is prepared to receive, while the send window simply reflects the size of the receive window of the peer TCP. Both then represent flow control as imposed by the receiver. However, consider that without the sender imposing flow control, and a slow link to a peer, TCP will simply fill up it's window with sent segments. Dealing with multiple TCP implementations filling their peer TCP's receive windows in this manner, busy intermediate routers may drop some of these segments, leading to timeout and retransmission, which may again lead to drops. This is termed congestion, and TCP has multiple congestion control strategies. We can see that in this example, we need to have some way of adjusting how much data we send depending on how quickly we receive acknowledgement - if we get ACKs quickly, we can safely send more segments, but if acknowledgements come slowly, we should proceed with more caution. More generally, we need to implement flow control on the send side also. Slow Start and Congestion Avoidance From RFC2581, let's examine the relevant variables: "The congestion window (cwnd) is a sender-side limit on the amount of data the sender can transmit into the network before receiving an acknowledgment (ACK). Another state variable, the slow start threshold (ssthresh), is used to determine whether the slow start or congestion avoidance algorithm is used to control data transmission" Slow start is used to probe the network's ability to handle transmission bursts both when a connection is first created and when retransmission timers fire. The latter case is important, as the fact that we have effectively lost TCP data acts as a motivator for re-probing how much data the network can handle from the sending TCP. The congestion window (cwnd) is initialized to a relatively small value, generally a low multiple of the sending maximum segment size. When slow start kicks in, we will only send that number of bytes before waiting for acknowledgement. When acknowledgements are received, the congestion window is increased in size until cwnd reaches the slow start threshold ssthresh value. For most congestion control algorithms the window increases exponentially under slow start, assuming we receive acknowledgements. We send 1 segment, receive an ACK, increase the cwnd by 1 MSS to 2*MSS, send 2 segments, receive 2 ACKs, increase the cwnd by 2*MSS to 4*MSS, send 4 segments etc. When the congestion window exceeds the slow start threshold, congestion avoidance is used instead of slow start. During congestion avoidance, the congestion window is generally updated by one MSS for each round-trip-time as opposed to each ACK, and so cwnd growth is linear instead of exponential (we may receive multiple ACKs within a single RTT). This continues until congestion is detected. If a retransmit timer fires, congestion is assumed and the ssthresh value is reset. It is reset to a fraction of the number of bytes outstanding (unacknowledged) in the network. At the same time the congestion window is reset to a single max segment size. Thus, we initiate slow start until we start receiving acknowledgements again, at which point we can eventually flip over to congestion avoidance when cwnd ssthresh. Congestion control algorithms differ most in how they handle the other indication of congestion - duplicate ACKs. A duplicate ACK is a strong indication that data has been lost, since they often come from a receiver explicitly asking for a retransmission. In some cases, a duplicate ACK may be generated at the receiver as a result of packets arriving out-of-order, so it is sensible to wait for multiple duplicate ACKs before assuming packet loss rather than out-of-order delivery. This is termed fast retransmit (i.e. retransmit without waiting for the retransmission timer to expire). Note that on Oracle Solaris 11, the congestion control method used can be customized. See here for more details. In general, 3 or more duplicate ACKs indicate packet loss and should trigger fast retransmit . It's best not to revert to slow start in this case, as the fact that the receiver knew it was missing data suggests it has received data with a higher sequence number, so we know traffic is still flowing. Falling back to slow start would be excessive therefore, so fast recovery is used instead. Observing slow start and congestion avoidance The following script counts TCP segments sent when under slow start (cwnd ssthresh). #!/usr/sbin/dtrace -s #pragma D option quiet tcp:::connect-request / start[args[1]-cs_cid] == 0/ { start[args[1]-cs_cid] = 1; } tcp:::send / start[args[1]-cs_cid] == 1 && args[3]-tcps_cwnd tcps_cwnd_ssthresh / { @c["Slow start", args[2]-ip_daddr, args[4]-tcp_dport] = count(); } tcp:::send / start[args[1]-cs_cid] == 1 && args[3]-tcps_cwnd args[3]-tcps_cwnd_ssthresh / { @c["Congestion avoidance", args[2]-ip_daddr, args[4]-tcp_dport] = count(); } As we can see the script only works on connections initiated since it is started (using the start[] associative array with the connection ID as index to set whether it's a new connection (start[cid] = 1). From there we simply differentiate send events where cwnd ssthresh (congestion avoidance). Here's the output taken when I accessed a YouTube video (where rport is 80) and from an FTP session where I put a large file onto a remote system. # dtrace -s tcp_slow_start.d ^C ALGORITHM RADDR RPORT #SEG Slow start 10.153.125.222 20 6 Slow start 138.3.237.7 80 14 Slow start 10.153.125.222 21 18 Congestion avoidance 10.153.125.222 20 1164 We see that in the case of the YouTube video, slow start was exclusively used. Most of the segments we sent in that case were likely ACKs. Compare this case - where 14 segments were sent using slow start - to the FTP case, where only 6 segments were sent before we switched to congestion avoidance for 1164 segments. In the case of the FTP session, the FTP data on port 20 was predominantly sent with congestion avoidance in operation, while the FTP session relied exclusively on slow start. For the default congestion control algorithm - "newreno" - on Solaris 11, slow start will increase the cwnd by 1 MSS for every acknowledgement received, and by 1 MSS for each RTT in congestion avoidance mode. Different pluggable congestion control algorithms operate slightly differently. For example "highspeed" will update the slow start cwnd by the number of bytes ACKed rather than the MSS. And to finish, here's a neat oneliner to visually display the distribution of congestion window values for all TCP connections to a given remote port using a quantization. In this example, only port 80 is in use and we see the majority of cwnd values for that port are in the 4096-8191 range. # dtrace -n 'tcp:::send { @q[args[4]-tcp_dport] = quantize(args[3]-tcps_cwnd); }' dtrace: description 'tcp:::send ' matched 10 probes ^C 80 value ------------- Distribution ------------- count -1 | 0 0 |@@@@@@ 5 1 | 0 2 | 0 4 | 0 8 | 0 16 | 0 32 | 0 64 | 0 128 | 0 256 | 0 512 | 0 1024 | 0 2048 |@@@@@@@@@ 8 4096 |@@@@@@@@@@@@@@@@@@@@@@@@@@ 23 8192 | 0

  Read the article

• REST to Objects in C#

  RESTful interfaces for web services are all the rage for many Web 2.0 sites.  If you want to consume these in a very simple fashion, LINQ to XML can do the job pretty easily in C#.  If you go searching for help on this, youll find a lot of incomplete solutions and fairly large toolkits and frameworks (guess how I know this) this quick article is meant to be a no fluff just stuff approach to making this work. POCO Objects Lets assume you have a Model that you want to suck data into from a RESTful web service.  Ideally this is a Plain Old CLR Object, meaning it isnt infected with any persistence or serialization goop.  It might look something like this: public class Entry { public int Id; public int UserId; public DateTime Date; public float Hours; public string Notes; public bool Billable;   public override string ToString() { return String.Format("[{0}] User: {1} Date: {2} Hours: {3} Notes: {4} Billable {5}", Id, UserId, Date, Hours, Notes, Billable); } } Not that this isnt a completely trivial object.  Lets look at the API for the service.  RESTful HTTP Service In this case, its TickSpots API, with the following sample output: <?xml version="1.0" encoding="UTF-8"?> <entries type="array"> <entry> <id type="integer">24</id> <task_id type="integer">14</task_id> <user_id type="integer">3</user_id> <date type="date">2008-03-08</date> <hours type="float">1.00</hours> <notes>Had trouble with tribbles.</notes> <billable>true</billable> # Billable is an attribute inherited from the task <billed>true</billed> # Billed is an attribute to track whether the entry has been invoiced <created_at type="datetime">Tue, 07 Oct 2008 14:46:16 -0400</created_at> <updated_at type="datetime">Tue, 07 Oct 2008 14:46:16 -0400</updated_at> # The following attributes are derived and provided for informational purposes: <user_email>[email protected]</user_email> <task_name>Remove converter assembly</task_name> <sum_hours type="float">2.00</sum_hours> <budget type="float">10.00</budget> <project_name>Realign dilithium crystals</project_name> <client_name>Starfleet Command</client_name> </entry> </entries> Im assuming in this case that I dont necessarily care about all of the data fields the service is returning I just need some of them for my applications purposes.  Thus, you can see there are more elements in the <entry> XML than I have in my Entry class. Get The XML with C# The next step is to get the XML.  The following snippet does the heavy lifting once you pass it the appropriate URL: protected XElement GetResponse(string uri) { var request = WebRequest.Create(uri) as HttpWebRequest; request.UserAgent = ".NET Sample"; request.KeepAlive = false;   request.Timeout = 15 * 1000;   var response = request.GetResponse() as HttpWebResponse;   if (request.HaveResponse == true && response != null) { var reader = new StreamReader(response.GetResponseStream()); return XElement.Parse(reader.ReadToEnd()); } throw new Exception("Error fetching data."); } This is adapted from the Yahoo Developer article on Web Service REST calls.  Once you have the XML, the last step is to get the data back as your POCO. Use LINQ-To-XML to Deserialize POCOs from XML This is done via the following code: public IEnumerable<Entry> List(DateTime startDate, DateTime endDate) { string additionalParameters = String.Format("start_date={0}&end_date={1}", startDate.ToShortDateString(), endDate.ToShortDateString()); string uri = BuildUrl("entries", additionalParameters);   XElement elements = GetResponse(uri);   var entries = from e in elements.Elements() where e.Name.LocalName == "entry" select new Entry { Id = int.Parse(e.Element("id").Value), UserId = int.Parse(e.Element("user_id").Value), Date = DateTime.Parse(e.Element("date").Value), Hours = float.Parse(e.Element("hours").Value), Notes = e.Element("notes").Value, Billable = bool.Parse(e.Element("billable").Value) }; return entries; }   For completeness, heres the BuildUrl method for my TickSpot API wrapper: // Change these to your settings protected const string projectDomain = "DOMAIN.tickspot.com"; private const string authParams = "[email protected]&password=MyTickSpotPassword";   protected string BuildUrl(string apiMethod, string additionalParams) { if (projectDomain.Contains("DOMAIN")) { throw new ApplicationException("You must update your domain in ProjectRepository.cs."); } if (authParams.Contains("MyTickSpotPassword")) { throw new ApplicationException("You must update your email and password in ProjectRepository.cs."); } return string.Format("https://{0}/api/{1}?{2}&{3}", projectDomain, apiMethod, authParams, additionalParams); } Thats it!  Now go forth and consume XML and map it to classes you actually want to work with.  Have fun! Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Hosting and consuming WCF services without configuration files

  - by martinsj

  In this post, I'll demonstrate how to configure both the host and the client in code without the need for configuring services i the <system.serviceModel> section of the config-file. In fact, you don't need a  <system.serviceModel> section at all. What you'll do need (and want) sometimes, is the Uri of the service in the configuration file. Configuring the Uri of the the service is actually only needed for the client or when self-hosting, not when hosting in IIS. So, exactly What do we need to configure? The binding type and the binding constraints The metadata behavior Debug behavior You can of course configure even more, and even more if you want to, WCF is after all the king of configuration… As an example I'll be hosting and consuming a service that removes most of the default constraints for WCF-services, using a BasicHttpBinding. Of course, in regards to security, it is probably better to have some constraints on the server, but this is only a demonstration. The ServerConfig class in the code beneath is a static helper class that will be used in the examples. In this post, I’ll be using this helper-class for all configuration, for both the server and the client. In WCF, the  client and the server have both their own WCF-configuration. With this piece of code, they will be sharing the same configuration. 1: public static class ServiceConfig 2: { 3: public static Binding DefaultBinding 4: { 5: get 6: { 7: var binding = new BasicHttpBinding(); 8: Configure(binding); 9: return binding; 10: } 11: } 12:  13: public static void Configure(HttpBindingBase binding) 14: { 15: if (binding == null) 16: { 17: throw new ArgumentException("Argument 'binding' cannot be null. Cannot configure binding."); 18: } 19:  20: binding.SendTimeout = new TimeSpan(0, 0, 30, 0); // 30 minute timeout 21: binding.MaxBufferSize = Int32.MaxValue; 22: binding.MaxBufferPoolSize = 2147483647; 23: binding.MaxReceivedMessageSize = Int32.MaxValue; 24: binding.ReaderQuotas.MaxArrayLength = Int32.MaxValue; 25: binding.ReaderQuotas.MaxBytesPerRead = Int32.MaxValue; 26: binding.ReaderQuotas.MaxDepth = Int32.MaxValue; 27: binding.ReaderQuotas.MaxNameTableCharCount = Int32.MaxValue; 28: binding.ReaderQuotas.MaxStringContentLength = Int32.MaxValue; 29: } 30:  31: public static ServiceMetadataBehavior ServiceMetadataBehavior 32: { 33: get 34: { 35: return new ServiceMetadataBehavior 36: { 37: HttpGetEnabled = true, 38: MetadataExporter = {PolicyVersion = PolicyVersion.Policy15} 39: }; 40: } 41: } 42:  43: public static ServiceDebugBehavior ServiceDebugBehavior 44: { 45: get 46: { 47: var smb = new ServiceDebugBehavior(); 48: Configure(smb); 49: return smb; 50: } 51: } 52:  53:  54: public static void Configure(ServiceDebugBehavior behavior) 55: { 56: if (behavior == null) 57: { 58: throw new ArgumentException("Argument 'behavior' cannot be null. Cannot configure debug behavior."); 59: } 60: 61: behavior.IncludeExceptionDetailInFaults = true; 62: } 63: } Configuring the server There are basically two ways to host a WCF service, in IIS and self-hosting. When hosting a WCF service in a production environment using SOA architecture, you'll be most likely hosting it in IIS. When testing the service in integration tests, it's very handy to be able to self-host services in the unit-tests. In fact, you can share the the WCF configuration for self-hosted services and services hosted in IIS. And that is exactly what you want to do, testing the same configurations for test and production environments.   Configuring when Self-hosting When self-hosting, in order to start the service, you'll have to instantiate the ServiceHost class, configure the  service and open it. 1: // Create the service-host. 2: var host = new ServiceHost(typeof(MyService), endpoint); 3:  4: // Configure the binding 5: host.AddServiceEndpoint(typeof(IMyService), ServiceConfig.DefaultBinding, endpoint); 6:  7: // Configure metadata behavior 8: host.Description.Behaviors.Add(ServiceConfig.ServiceMetadataBehavior); 9:  10: // Configure debgug behavior 11: ServiceConfig.Configure((ServiceDebugBehavior)host.Description.Behaviors[typeof(ServiceDebugBehavior)]); 12: 13: // Start listening to the service 14: host.Open(); 15:  Configuring when hosting in IIS When you create a WCF service application with the wizard in Visual Studio, you'll end up with bits and pieces of code in order to get the service running: Svc-file with codebehind. A interface to the service Web.config In order to get rid of the configuration in the <system.serviceModel> section, which the wizard has generated for us, we must tell the service that we have a factory that will create the service for us. We do this by changing the markup for the svc-file: 1: <%@ ServiceHost Language="C#" Debug="true" Service="Namespace.MyService" Factory="Namespace.ServiceHostFactory" %> The markup tells IIS that we have a factory called ServiceHostFactory for this service. The service factory has a method we can override which will be called when someone asks IIS for the service. There are overloads we can override: 1: System.ServiceModel.ServiceHostBase CreateServiceHost(string constructorString, Uri[] baseAddresses) 2: System.ServiceModel.ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) 3:  In this example, we'll be using the last one, so our implementation looks like this: 1: public class ServiceHostFactory : System.ServiceModel.Activation.ServiceHostFactory 2: { 3:  4: protected override System.ServiceModel.ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) 5: { 6: var host = base.CreateServiceHost(serviceType, baseAddresses); 7: host.Description.Behaviors.Add(ServiceConfig.ServiceMetadataBehavior); 8: ServiceConfig.Configure((ServiceDebugBehavior)host.Description.Behaviors[typeof(ServiceDebugBehavior)]); 9: return host; 10: } 11: } 12:  1: public class ServiceHostFactory : System.ServiceModel.Activation.ServiceHostFactory 2: { 3: 4: protected override System.ServiceModel.ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) 5: { 6: var host = base.CreateServiceHost(serviceType, baseAddresses); 7: host.Description.Behaviors.Add(ServiceConfig.ServiceMetadataBehavior); 8: ServiceConfig.Configure((ServiceDebugBehavior)host.Description.Behaviors[typeof(ServiceDebugBehavior)]); 9: return host; 10: } 11: } 12: As you can see, we are using the same configuration helper we used when self-hosting. Now, when you have a factory, the <system.serviceModel> section of the configuration can be removed, because the section will be ignored when the service has a custom factory. If you want to configure something else in the config-file, one could configure in some other section.   Configuring the client Microsoft has helpfully created a ChannelFactory class in order to create a proxy client. When using this approach, you don't have generate those awfull proxy classes for the client. If you share the contracts with the server in it's own assembly like in the layer diagram under, you can share the same piece of code. The contracts in WCF are the interface to the service and if any, the datacontracts (custom types) the service depends on. Using the ChannelFactory with our configuration helper-class is very simple: 1: var identity = EndpointIdentity.CreateDnsIdentity("localhost"); 2: var endpointAddress = new EndpointAddress(endPoint, identity); 3: var factory = new ChannelFactory<IMyService>(DeployServiceConfig.DefaultBinding, endpointAddress); 4: using (var myService = new factory.CreateChannel()) 5: { 6: myService.Hello(); 7: } 8: factory.Close();   Happy configuration!

  Read the article

• Accessing your web server via IPv6

  Being able to run your systems on IPv6, have automatic address assignment and the ability to resolve host names are the necessary building blocks in your IPv6 network infrastructure. Now, that everything is in place it is about time that we are going to enable another service to respond to IPv6 requests. The following article will guide through the steps on how to enable Apache2 httpd to listen and respond to incoming IPv6 requests. This is the fourth article in a series on IPv6 configuration: Configure IPv6 on your Linux system DHCPv6: Provide IPv6 information in your local network Enabling DNS for IPv6 infrastructure Accessing your web server via IPv6 Piece of advice: This is based on my findings on the internet while reading other people's helpful articles and going through a couple of man-pages on my local system. Surfing the web - IPv6 style Enabling IPv6 connections in Apache 2 is fairly simply. But first let's check whether your system has a running instance of Apache2 or not. You can check this like so: $ service apache2 status Apache2 is running (pid 2680). In case that you got a 'service unknown' you have to install Apache to proceed with the following steps: $ sudo apt-get install apache2 Out of the box, Apache binds to all your available network interfaces and listens to TCP port 80. To check this, run the following command: $ sudo netstat -lnptu | grep "apache2\W*$"tcp6       0      0 :::80                   :::*                    LISTEN      28306/apache2 In this case Apache2 is already binding to IPv6 (and implicitly to IPv4). If you only got a tcp output, then your HTTPd is not yet IPv6 enabled. Check your Listen directive, depending on your system this might be in a different location than the default in Ubuntu. $ sudo nano /etc/apache2/ports.conf # If you just change the port or add more ports here, you will likely also# have to change the VirtualHost statement in# /etc/apache2/sites-enabled/000-default# This is also true if you have upgraded from before 2.2.9-3 (i.e. from# Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and# README.Debian.gzNameVirtualHost *:80Listen 80<IfModule mod_ssl.c>    # If you add NameVirtualHost *:443 here, you will also have to change    # the VirtualHost statement in /etc/apache2/sites-available/default-ssl    # to <VirtualHost *:443>    # Server Name Indication for SSL named virtual hosts is currently not    # supported by MSIE on Windows XP.    Listen 443</IfModule><IfModule mod_gnutls.c>    Listen 443</IfModule> Just in case that you don't have a ports.conf file, look for it like so: $ cd /etc/apache2/$ fgrep -r -i 'listen' ./* And modify the related file instead of the ports.conf. Which most probably might be either apache2.conf or httpd.conf anyways. Okay, please bear in mind that Apache can only bind once on the same interface and port. So, eventually, you might be interested to add another port which explicitly listens to IPv6 only. In that case, you would add the following in your configuration file: Listen 80Listen [2001:db8:bad:a55::2]:8080 But this is completely optional... Anyways, just to complete all steps, you save the file, and then check the syntax like so: $ sudo apache2ctl configtestSyntax OK Ok, now let's apply the modifications to our running Apache2 instances: $ sudo service apache2 reload * Reloading web server config apache2   ...done. $ sudo netstat -lnptu | grep "apache2\W*$"                                                                                               tcp6       0      0 2001:db8:bad:a55:::8080 :::*                    LISTEN      5922/apache2    tcp6       0      0 :::80                   :::*                    LISTEN      5922/apache2 There we have two daemons running and listening to different TCP ports. Now, that the basics are in place, it's time to prepare any website to respond to incoming requests on the IPv6 address. Open up any configuration file you have below your sites-enabled folder. $ ls -al /etc/apache2/sites-enabled/... $ sudo nano /etc/apache2/sites-enabled/000-default <VirtualHost *:80 [2001:db8:bad:a55::2]:8080>        ServerAdmin [email protected]        ServerName server.ios.mu        ServerAlias server Here, we have to check and modify the VirtualHost directive and enable it to respond to the IPv6 address and port our web server is listening to. Save your changes, run the configuration test and reload Apache2 in order to apply your modifications. After successful steps you can launch your favourite browser and navigate to your IPv6 enabled web server. Accessing an IPv6 address in the browser That looks like a successful surgery to me... Note: In case that you received a timeout, check whether your client is operating on IPv6, too.

  Read the article

• Random process hangs after clean install

  - by Toshe

  After installing fresh Kubuntu 11.04 Natty on my desktop PC, I experienced some issues with application and process hangs. There is also a problem with my USB 3 hard disk. These sort of problems did not happen on Kubuntu 10.10 installed on the same PC (on separate partition). The hangs manifest themselves with kernel log messages like these: [ 960.480151] INFO: task amarok:2505 blocked for more than 120 seconds. [ 960.480153] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 960.480155] amarok D 0000000000000000 0 2505 1 0x00000000 [ 960.480158] ffff8800a556bb38 0000000000000086 ffff8800a556bfd8 ffff8800a556a000 [ 960.480162] 0000000000013d00 ffff8800cb7f3178 ffff8800a556bfd8 0000000000013d00 [ 960.480165] ffffffff81a0b020 ffff8800cb7f2dc0 ffffea000242ac58 ffff88012704c870 [ 960.480169] Call Trace: [ 960.480172] [<ffffffff815c19f7>] __mutex_lock_slowpath+0xf7/0x180 [ 960.480175] [<ffffffff815c144b>] mutex_lock+0x2b/0x50 [ 960.480180] [<ffffffffa0d0ad42>] video_open+0x102/0x400 [cx8800] [ 960.480183] [<ffffffff815c2cbe>] ? _raw_spin_lock+0xe/0x20 [ 960.480186] [<ffffffff8117c55d>] ? __d_lookup+0x10d/0x170 [ 960.480191] [<ffffffffa0ca0731>] v4l2_open+0x101/0x130 [videodev] [ 960.480194] [<ffffffff81168f4a>] chrdev_open+0xda/0x1f0 [ 960.480197] [<ffffffff81168e70>] ? chrdev_open+0x0/0x1f0 [ 960.480200] [<ffffffff81162cee>] __dentry_open+0xce/0x2f0 [ 960.480202] [<ffffffff8116ef33>] ? generic_permission+0x23/0xc0 [ 960.480205] [<ffffffff811641e1>] nameidata_to_filp+0x71/0x80 [ 960.480208] [<ffffffff811733c8>] finish_open+0xc8/0x1b0 [ 960.480210] [<ffffffff811725b7>] ? do_path_lookup+0x87/0x160 [ 960.480213] [<ffffffff81173b88>] do_filp_open+0x2c8/0x7c0 [ 960.480216] [<ffffffff81172902>] ? user_path_at+0x62/0xa0 [ 960.480219] [<ffffffff81131d4d>] ? handle_mm_fault+0x16d/0x250 [ 960.480222] [<ffffffff812e6c47>] ? __strncpy_from_user+0x27/0x60 [ 960.480225] [<ffffffff81180ea7>] ? alloc_fd+0xf7/0x150 [ 960.480228] [<ffffffff8116425a>] do_sys_open+0x6a/0x150 [ 960.480230] [<ffffffff81164360>] sys_open+0x20/0x30 [ 960.480233] [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b [ 1080.480027] INFO: task knotify4:1663 blocked for more than 120 seconds. [ 1080.480030] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1080.480032] knotify4 D 0000000000000000 0 1663 1 0x00000000 [ 1080.480036] ffff880123a2bb28 0000000000000082 ffff880123a2bfd8 ffff880123a2a000 [ 1080.480040] 0000000000013d00 ffff880121003178 ffff880123a2bfd8 0000000000013d00 [ 1080.480044] ffff8800cb7e16e0 ffff880121002dc0 ffffffff81060a27 ffff88012704c870 [ 1080.480048] Call Trace: [ 1080.480054] [<ffffffff81060a27>] ? mutex_spin_on_owner+0x97/0xd0 [ 1080.480059] [<ffffffff815c19f7>] __mutex_lock_slowpath+0xf7/0x180 [ 1080.480069] [<ffffffff812e4f61>] ? vsnprintf+0x221/0x620 [ 1080.480072] [<ffffffff815c144b>] mutex_lock+0x2b/0x50 [ 1080.480076] [<ffffffffa0b2d10f>] cx8802_request_acquire+0x5f/0xf0 [cx8802] [ 1080.480081] [<ffffffffa0e87e08>] mpeg_open+0x78/0x270 [cx88_blackbird] [ 1080.480084] [<ffffffff8117c55d>] ? __d_lookup+0x10d/0x170 [ 1080.480092] [<ffffffffa0ca0731>] v4l2_open+0x101/0x130 [videodev] [ 1080.480096] [<ffffffff81168f4a>] chrdev_open+0xda/0x1f0 [ 1080.480099] [<ffffffff81168e70>] ? chrdev_open+0x0/0x1f0 [ 1080.480102] [<ffffffff81162cee>] __dentry_open+0xce/0x2f0 [ 1080.480105] [<ffffffff8116ef33>] ? generic_permission+0x23/0xc0 [ 1080.480108] [<ffffffff811641e1>] nameidata_to_filp+0x71/0x80 [ 1080.480111] [<ffffffff811733c8>] finish_open+0xc8/0x1b0 [ 1080.480113] [<ffffffff811725b7>] ? do_path_lookup+0x87/0x160 [ 1080.480116] [<ffffffff81173b88>] do_filp_open+0x2c8/0x7c0 [ 1080.480119] [<ffffffff81172902>] ? user_path_at+0x62/0xa0 [ 1080.480122] [<ffffffff811663f1>] ? get_empty_filp+0xa1/0x170 [ 1080.480125] [<ffffffff812e6c47>] ? __strncpy_from_user+0x27/0x60 [ 1080.480128] [<ffffffff81180ea7>] ? alloc_fd+0xf7/0x150 [ 1080.480131] [<ffffffff8116425a>] do_sys_open+0x6a/0x150 [ 1080.480134] [<ffffffff81164360>] sys_open+0x20/0x30 [ 1080.480137] [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b [ 1080.480147] INFO: task dolphin:1842 blocked for more than 120 seconds. [ 1080.480148] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1080.480150] dolphin D 0000000000000000 0 1842 1 0x00000004 [ 1080.480154] ffff8800cb4f3b38 0000000000000082 ffff8800cb4f3fd8 ffff8800cb4f2000 [ 1080.480157] 0000000000013d00 ffff8800cb7f4858 ffff8800cb4f3fd8 0000000000013d00 [ 1080.480161] ffffffff81a0b020 ffff8800cb7f44a0 ffffea000267b0d0 ffff88012704c870 [ 1080.480164] Call Trace: [ 1080.480168] [<ffffffff815c19f7>] __mutex_lock_slowpath+0xf7/0x180 [ 1080.480171] [<ffffffff815c144b>] mutex_lock+0x2b/0x50 [ 1080.480176] [<ffffffffa0d0ad42>] video_open+0x102/0x400 [cx8800] [ 1080.480179] [<ffffffff815c2cbe>] ? _raw_spin_lock+0xe/0x20 [ 1080.480181] [<ffffffff8117c55d>] ? __d_lookup+0x10d/0x170 [ 1080.480186] [<ffffffffa0ca0731>] v4l2_open+0x101/0x130 [videodev] [ 1080.480190] [<ffffffff81168f4a>] chrdev_open+0xda/0x1f0 [ 1080.480192] [<ffffffff81168e70>] ? chrdev_open+0x0/0x1f0 [ 1080.480195] [<ffffffff81162cee>] __dentry_open+0xce/0x2f0 [ 1080.480198] [<ffffffff8116ef33>] ? generic_permission+0x23/0xc0 [ 1080.480200] [<ffffffff811641e1>] nameidata_to_filp+0x71/0x80 [ 1080.480203] [<ffffffff811733c8>] finish_open+0xc8/0x1b0 [ 1080.480206] [<ffffffff811725b7>] ? do_path_lookup+0x87/0x160 [ 1080.480208] [<ffffffff81173b88>] do_filp_open+0x2c8/0x7c0 [ 1080.480211] [<ffffffff81172902>] ? user_path_at+0x62/0xa0 [ 1080.480214] [<ffffffff81131d4d>] ? handle_mm_fault+0x16d/0x250 [ 1080.480217] [<ffffffff812e6c47>] ? __strncpy_from_user+0x27/0x60 [ 1080.480220] [<ffffffff81180ea7>] ? alloc_fd+0xf7/0x150 [ 1080.480223] [<ffffffff8116425a>] do_sys_open+0x6a/0x150 [ 1080.480225] [<ffffffff81164360>] sys_open+0x20/0x30 [ 1080.480228] [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b Attempts to kill the hung process are unsuccessful: root@deskpc:~# ps -ef |grep amarok myuser 2505 1 0 10:47 ? 00:00:00 /usr/bin/amarok root 2747 2020 0 11:06 pts/3 00:00:00 grep --color=auto amarok root@deskpc:~# kill -9 2505 root@deskpc:~# ps -ef |grep amarok myuser 2505 1 0 10:47 ? 00:00:00 /usr/bin/amarok root 2749 2020 0 11:06 pts/3 00:00:00 grep --color=auto amarok root@deskpc:~# kill -9 2505 root@deskpc:~# ps -ef |grep amarok myuser 2505 1 0 10:47 ? 00:00:00 /usr/bin/amarok root 2751 2020 0 11:06 pts/3 00:00:00 grep --color=auto amarok root@deskpc:~# When trying to access my external USB3 disk, the following kernel message is observed: [ 2169.330012] xhci_hcd 0000:06:00.0: Timeout while waiting for a slot [ 2169.330018] hub 3-0:1.0: couldn't allocate port 1 usb_device I am not sure the two problems (application hangs and USB3 timeouts are related) but they do not happen under Kubuntu 10.10. Judging by the dmesg messages, it looks to me that this is a kernel (or potentially kernel driver) problem, but not sure how to debug it. Any ideas? I ran apport-bug, but it advised me to post a question here first. Shall I report the issue on the official K/Ubuntu bugzilla?

  Read the article

• REST to Objects in C#

  RESTful interfaces for web services are all the rage for many Web 2.0 sites.  If you want to consume these in a very simple fashion, LINQ to XML can do the job pretty easily in C#.  If you go searching for help on this, youll find a lot of incomplete solutions and fairly large toolkits and frameworks (guess how I know this) this quick article is meant to be a no fluff just stuff approach to making this work. POCO Objects Lets assume you have a Model that you want to suck data into from a RESTful web service.  Ideally this is a Plain Old CLR Object, meaning it isnt infected with any persistence or serialization goop.  It might look something like this: public class Entry { public int Id; public int UserId; public DateTime Date; public float Hours; public string Notes; public bool Billable;   public override string ToString() { return String.Format("[{0}] User: {1} Date: {2} Hours: {3} Notes: {4} Billable {5}", Id, UserId, Date, Hours, Notes, Billable); } } Not that this isnt a completely trivial object.  Lets look at the API for the service.  RESTful HTTP Service In this case, its TickSpots API, with the following sample output: <?xml version="1.0" encoding="UTF-8"?> <entries type="array"> <entry> <id type="integer">24</id> <task_id type="integer">14</task_id> <user_id type="integer">3</user_id> <date type="date">2008-03-08</date> <hours type="float">1.00</hours> <notes>Had trouble with tribbles.</notes> <billable>true</billable> # Billable is an attribute inherited from the task <billed>true</billed> # Billed is an attribute to track whether the entry has been invoiced <created_at type="datetime">Tue, 07 Oct 2008 14:46:16 -0400</created_at> <updated_at type="datetime">Tue, 07 Oct 2008 14:46:16 -0400</updated_at> # The following attributes are derived and provided for informational purposes: <user_email>[email protected]</user_email> <task_name>Remove converter assembly</task_name> <sum_hours type="float">2.00</sum_hours> <budget type="float">10.00</budget> <project_name>Realign dilithium crystals</project_name> <client_name>Starfleet Command</client_name> </entry> </entries> Im assuming in this case that I dont necessarily care about all of the data fields the service is returning I just need some of them for my applications purposes.  Thus, you can see there are more elements in the <entry> XML than I have in my Entry class. Get The XML with C# The next step is to get the XML.  The following snippet does the heavy lifting once you pass it the appropriate URL: protected XElement GetResponse(string uri) { var request = WebRequest.Create(uri) as HttpWebRequest; request.UserAgent = ".NET Sample"; request.KeepAlive = false;   request.Timeout = 15 * 1000;   var response = request.GetResponse() as HttpWebResponse;   if (request.HaveResponse == true && response != null) { var reader = new StreamReader(response.GetResponseStream()); return XElement.Parse(reader.ReadToEnd()); } throw new Exception("Error fetching data."); } This is adapted from the Yahoo Developer article on Web Service REST calls.  Once you have the XML, the last step is to get the data back as your POCO. Use LINQ-To-XML to Deserialize POCOs from XML This is done via the following code: public IEnumerable<Entry> List(DateTime startDate, DateTime endDate) { string additionalParameters = String.Format("start_date={0}&end_date={1}", startDate.ToShortDateString(), endDate.ToShortDateString()); string uri = BuildUrl("entries", additionalParameters);   XElement elements = GetResponse(uri);   var entries = from e in elements.Elements() where e.Name.LocalName == "entry" select new Entry { Id = int.Parse(e.Element("id").Value), UserId = int.Parse(e.Element("user_id").Value), Date = DateTime.Parse(e.Element("date").Value), Hours = float.Parse(e.Element("hours").Value), Notes = e.Element("notes").Value, Billable = bool.Parse(e.Element("billable").Value) }; return entries; }   For completeness, heres the BuildUrl method for my TickSpot API wrapper: // Change these to your settings protected const string projectDomain = "DOMAIN.tickspot.com"; private const string authParams = "[email protected]&password=MyTickSpotPassword";   protected string BuildUrl(string apiMethod, string additionalParams) { if (projectDomain.Contains("DOMAIN")) { throw new ApplicationException("You must update your domain in ProjectRepository.cs."); } if (authParams.Contains("MyTickSpotPassword")) { throw new ApplicationException("You must update your email and password in ProjectRepository.cs."); } return string.Format("https://{0}/api/{1}?{2}&{3}", projectDomain, apiMethod, authParams, additionalParams); } Thats it!  Now go forth and consume XML and map it to classes you actually want to work with.  Have fun! Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Restructuring a large Chrome Extension/WebApp

  - by A.M.K

  I have a very complex Chrome Extension that has gotten too large to maintain in its current format. I'd like to restructure it, but I'm 15 and this is the first webapp or extension of it's type I've built so I have no idea how to do it. TL;DR: I have a large/complex webapp I'd like to restructure and I don't know how to do it. Should I follow my current restructure plan (below)? Does that sound like a good starting point, or is there a different approach that I'm missing? Should I not do any of the things I listed? While it isn't relevant to the question, the actual code is on Github and the extension is on the webstore. The basic structure is as follows: index.html <html> <head> <link href="css/style.css" rel="stylesheet" /> <!-- This holds the main app styles --> <link href="css/widgets.css" rel="stylesheet" /> <!-- And this one holds widget styles --> </head> <body class="unloaded"> <!-- Low-level base elements are "hardcoded" here, the unloaded class is used for transitions and is removed on load. i.e: --> <div class="tab-container" tabindex="-1"> <!-- Tab nav --> </div> <!-- Templates for all parts of the application and widgets are stored as elements here. I plan on changing these to <script> elements during the restructure since <template>'s need valid HTML. --> <template id="template.toolbar"> <!-- Template content --> </template> <!-- Templates end --> <!-- Plugins --> <script type="text/javascript" src="js/plugins.js"></script> <!-- This contains the code for all widgets, I plan on moving this online and downloading as necessary soon. --> <script type="text/javascript" src="js/widgets.js"></script> <!-- This contains the main application JS. --> <script type="text/javascript" src="js/script.js"></script> </body> </html> widgets.js (initLog || (window.initLog = [])).push([new Date().getTime(), "A log is kept during page load so performance can be analyzed and errors pinpointed"]); // Widgets are stored in an object and extended (with jQuery, but I'll probably switch to underscore if using Backbone) as necessary var Widgets = { 1: { // Widget ID, this is set here so widgets can be retreived by ID id: 1, // Widget ID again, this is used after the widget object is duplicated and detached size: 3, // Default size, medium in this case order: 1, // Order shown in "store" name: "Weather", // Widget name interval: 300000, // Refresh interval nicename: "weather", // HTML and JS safe widget name sizes: ["tiny", "small", "medium"], // Available widget sizes desc: "Short widget description", settings: [ { // Widget setting specifications stored as an array of objects. These are used to dynamically generate widget setting popups. type: "list", nicename: "location", label: "Location(s)", placeholder: "Enter a location and press Enter" } ], config: { // Widget settings as stored in the tabs object (see script.js for storage information) size: "medium", location: ["San Francisco, CA"] }, data: {}, // Cached widget data stored locally, this lets it work offline customFunc: function(cb) {}, // Widgets can optionally define custom functions in any part of their object refresh: function() {}, // This fetches data from the web and caches it locally in data, then calls render. It gets called after the page is loaded for faster loads render: function() {} // This renders the widget only using information from data, it's called on page load. } }; script.js (initLog || (window.initLog = [])).push([new Date().getTime(), "These are also at the end of every file"]); // Plugins, extends and globals go here. i.e. Number.prototype.pad = .... var iChrome = function(refresh) { // The main iChrome init, called with refresh when refreshing to not re-run libs iChrome.Status.log("Starting page generation"); // From now on iChrome.Status.log is defined, it's used in place of the initLog iChrome.CSS(); // Dynamically generate CSS based on settings iChrome.Tabs(); // This takes the tabs stored in the storage (see fetching below) and renders all columns and widgets as necessary iChrome.Status.log("Tabs rendered"); // These will be omitted further along in this excerpt, but they're used everywhere // Checks for justInstalled => show getting started are run here /* The main init runs the bare minimum required to display the page, this sets all non-visible or instantly need things (such as widget dragging) on a timeout */ iChrome.deferredTimeout = setTimeout(function() { iChrome.deferred(refresh); // Pass refresh along, see above }, 200); }; iChrome.deferred = function(refresh) {}; // This calls modules one after the next in the appropriate order to finish rendering the page iChrome.Search = function() {}; // Modules have a base init function and are camel-cased and capitalized iChrome.Search.submit = function(val) {}; // Methods within modules are camel-cased and not capitalized /* Extension storage is async and fetched at the beginning of plugins.js, it's then stored in a variable that iChrome.Storage processes. The fetcher checks to see if processStorage is defined, if it is it gets called, otherwise settings are left in iChromeConfig */ var processStorage = function() { iChrome.Storage(function() { iChrome.Templates(); // Templates are read from their elements and held in a cache iChrome(); // Init is called }); }; if (typeof iChromeConfig == "object") { processStorage(); } Objectives of the restructure Memory usage: Chrome apparently has a memory leak in extensions, they're trying to fix it but memory still keeps on getting increased every time the page is loaded. The app also uses a lot on its own. Code readability: At this point I can't follow what's being called in the code. While rewriting the code I plan on properly commenting everything. Module interdependence: Right now modules call each other a lot, AFAIK that's not good at all since any change you make to one module could affect countless others. Fault tolerance: There's very little fault tolerance or error handling right now. If a widget is causing the rest of the page to stop rendering the user should at least be able to remove it. Speed is currently not an issue and I'd like to keep it that way. How I think I should do it The restructure should be done using Backbone.js and events that call modules (i.e. on storage.loaded = init). Modules should each go in their own file, I'm thinking there should be a set of core files that all modules can rely on and call directly and everything else should be event based. Widget structure should be kept largely the same, but maybe they should also be split into their own files. AFAIK you can't load all templates in a folder, therefore they need to stay inline. Grunt should be used to merge all modules, plugins and widgets into one file. Templates should also all be precompiled. Question: Should I follow my current restructure plan? Does that sound like a good starting point, or is there a different approach that I'm missing? Should I not do any of the things I listed? Do applications written with Backbone tend to be more intensive (memory and speed) than ones written in Vanilla JS? Also, can I expect to improve this with a proper restructure or is my current code about as good as can be expected?

  Read the article

• Oracle EBS?????(Order->AR)

  - by Pan.Tian

  ???? ??:Order Management > Orders,Returns > Sales Orders ???????,??,????,???? ???????,????,??... ??Book Order,??Book??,????????Status??????“Booked”,???????"Awaiting Shipping",?????????,??????????????? ??:??Book??,????????????,????Shipping Transactions Form,????,?????????Line Status?Ready to Release,Next Step?Pick Release Pick Release ??:Order Management > Shipping > Release Sales Orders > Release Sales Orders Pick Release????(?????????).?Order  Number?????????? Auto Pick Confirm???No Auto Allocate???N Auto Allocate?Auto Pick Confirm??????Yes,???????????,??????No,???Yes??,?????Allocate?Pick Confirm??,??????????? ??????????Pick  Release,”Concurrent“??Pick Release?????Concurrent Request???,"Execute Now"????????Pick Release,??????????????User,??????Concurrent??? Pick Release?????????Pick Release?????Pick Wave??Move Order,??Move Order????????????????????(Staging),????INV??????????? INV_MOVE_ORDER_PUB.CREATE_MOVE_ORDER_HEADER???Move Order??(??Pick Release?????????????:Pick Release Process) ????????,?Pick Release??,?????????????Reservation(??),?????????Soft Reservations,?????????????,????Org?????????? ??:????,Shipping Transaction?Line Status?"Released to Warehouse",Next Step?"Transact Move Order";????????Booked,?????”Awaiting Shipping“? Pick Confirm Pick Confirm(????)????????Transact Move Order????,?Allocate????,?Transact Move Order. ??:Inventory > Move Orders > Transact Move Orders ????,Pick Wave??Tab,????? ??TMO????,??Allocate,Allocate?????????Picking Rule?????,??????Suggestion????,Suggestion?????? MTL_MATERIAL_TRANSACTIONS_TEMP?(?Pending Transactions)? ????Allocate??,??????Allocation????Single,Multiple??None???,Single??, ??????????Suggestion?Transaction??,Multiple???????;None??????Suggestion? ?(????????????????) ????????Transact??Move Order ?Transact??,Inventory Transaction Manager ???Suggestion Transactions(MMTT),???????????????,??????Subinventory??????(Staging)??? Transction???Material Transaction?Form????? ????Reservation??,?Transact??,???????,Reservation????????,????Sub,locator???? ??:????,Shipping Transaction?Line Status?"Staged/Pick Confirmed",Next Step?"Ship Confirm/Close Trip Stop";????????Booked,??????”Picked“? Ship Confirm Deliveries ??:Order Management > Shipping > Transactions ???Delivery??,??Ship Confirm(????),????Pick Release???,????Autocreate Delivery,???????Define Shipping Parameters????????,??shipping parameters???????,?????????Ship Confirm?????Action->Auto-create Deliveries. Delivery????????????????,????????.... Delivery??,??Ship Confirm???,???????,"Defer Interface"?????,?????????Interface Trip Stop SRS,????Defer Interface,?OK? Delivery was successfully confirmed!!! Ship Confirm????????????MTL_TRANSACTIONS_INTERFACE??,??MTI??????Sales Order Issue,??????????Interface Trip Stop???,???MTI??MMT??? ??:????,Shipping Transaction?Line Status?"Shipped",Next Step?"Run Interfaces";????????Booked,??????”Shipped“? Interface Trip Stop - SRS ?????Ship Confirm??????Defer Interface,??????????????Interface Trip Stop - SRS? ??:Order Management > Shipping > Interface > Run > Request:Interface Trip Stop - SRS Interface Trip Stop????????:Inventory Interface  SRS(????????)? Order Management Interface  SRS(?????????????AR??)? Inventory Interface  SRS???Shipping Transaction??????MTI,??INV Manager????MTI????MMT??,??Sales Order Issue?transaction??????,???????????Reservation????Inventory Interface  SRS?????,???WSH_DELIVERY_DETAILS??INV_INTERFACED_FLAG???Y? Order Management Interface - SRS??Inventory Interface  SRS?????,??Request?????????????AR??,OM Interface????????WSH_DELIVERY_DETAILS??OE_INTERFACED_FLAG?Y? ??:????,Shipping Transaction?Line Status?"Interfaced",Next Step?"Not Applicable";????????Booked,??????”Shipped“? Workflow background Process ??:Inventory > Workflow Background Engine Item Type:OM Order Line Process Deferred:Yes Process Timeout:No ??program????Deffered???workflow,Workflow Background Process???,???????Order????RA Interface???(RA_INTERFACE_LINES_ALL,RA_INTERFACE_SALESCREDITS_ALL,RA_Interface_distribution) ????????SQL???RA Interface??: 1.SELECT * FROM RA_INTERFACE_LINES_ALL WHERE sales_order = '65961'; 2.SELECT * FROM RA_INTERFACE_SALESCREDITS_ALL WHERE INTERFACE_LINE_ID IN (SELECT INTERFACE_LINE_ID FROM RA_INTERFACE_LINES_ALL WHERE sales_order = '65961' ); 3.SELECT * FROM RA_INTERFACE_DISTRIBUTIONS_ALL WHERE INTERFACE_LINE_ID IN (SELECT INTERFACE_LINE_ID FROM RA_INTERFACE_LINES_ALL WHERE sales_order = '65961' ); ?????RA Interface??,??OE_ORDER_LINES_ALL?INVOICE_INTERFACE_STATUS_CODE????? Yes,INVOICED_QUANTITY?????????????????????????Closed,????????Booked? AutoInvoice ????AR?? ??:Account Receivable > Interface > AutoInvoice Name:Autoinvoice Master Program Invoice Source:Order Entry Default Day:???? ???,?request????”Autoinvoice Import Program“???? ???,????Auto Invoice Program????RA?interface?,?????????????,???????AR???? (RA_CUSTOMER_TRX_ALL,RA_CUSTOMER_TRX_LINES,AR_PAYMENT_SCHEDULES). ?????? Order > Action > Additional Information > Invoices/Credit Memos????????,???????SQL?????AR??, SELECT ooha.order_number , oola.line_number so_line_number , oola.ordered_item , oola.ordered_quantity * oola.unit_selling_price so_extended_price , rcta.trx_number invoice_number , rcta.trx_date , rctla.line_number inv_line_number , rctla.unit_selling_price inv_unit_selling_price FROM oe_order_headers_all ooha , oe_order_lines_all oola , ra_customer_trx_all rcta , ra_customer_trx_lines_all rctla WHERE ooha.header_id = oola.header_id AND rcta.customer_trx_id = rctla.customer_trx_id AND rctla.interface_line_attribute6 = TO_CHAR (oola.line_id) AND rctla.interface_line_attribute1 = TO_CHAR (ooha.order_number) AND order_number = :p_order_number; ??Autoinvoice Import Program???error???,?????RA_INTERFACE_ERRORS_ALL?Message_text??,???????? Closing the Order ?????????,?????????(Close??Cancel)?0.5?,??????Workflow Background Process??????? ????????:you can wait until month-end and the “Order Flow – Generic” workflow will close it for you. Order&Shipping Transactions Status Summary Step Order Header Status Order Line Status Order Flow Workflow Status (Order Header) Line Flow Workflow Status (Order Line) Shipping Transaction  Status(RELEASED_STATUS in WDD) 1. Enter an Order Entered Entered Book Order Manual Enter – Line                              N/A 2. Book the Order Booked Awaiting Shipping Close Order Schedule ->Create Supply ->Ship – Line                       Ready to Release(R) 3. Pick the Order Booked Picked Close Order Ship – Line 1.Released to Warehouse(S)(Pick Release but not pick confirm) 2.Staged/Pick Confirmed(Y)(After pick confirm) 4. Ship the Order Booked Shipped Close Order Fulfill – Deferred 1.Shipped(After ship confirm) 2.Interfaced(C)(After ITS) Booked Closed Close Order Fulfill ->Invoice Interface ->Close Line -> End 5. Close the Order Closed Closed End End ????,shipping txn???,??????????:http://blog.csdn.net/pan_tian/article/details/7696528 ======EOF======

  Read the article

• PSTN Trunk TDM400P Install on Asterisk / Trixbox

  - by Jona

  Hey All, I'm trying to get a TDM400P card with FXO module to connect to our PSTN line. The card is correctly detected by Linux: [trixbox1.localdomain asterisk]# lspci 00:09.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface I've run setup-pstn which produces the following output trixbox1.localdomain ~]# setup-pstn -------------------------------------------------------------- Detecting PSTN cards and USB PSTN Devices -------------------------------------------------------------- Hardware present! STOPPING ASTERISK Asterisk Stopped STOPPING FOP SERVER FOP Server Stopped Unloading DAHDI hardware modules: done Loading DAHDI hardware modules: wct4xxp: [ OK ] wcte12xp: [ OK ] wct1xxp: [ OK ] wcte11xp: [ OK ] wctdm24xxp: [ OK ] opvxa1200: [ OK ] wcfxo: [ OK ] wctdm: [ OK ] wcb4xxp: [ OK ] wctc4xxp: [ OK ] xpp_usb: [ OK ] Running dahdi_cfg: [ OK ] SETTING FILE PERMISSIONS Permissions OK STARTING ASTERISK Asterisk Started STARTING FOP SERVER FOP Server Started Chan Extension Context Language MOH Interpret Blocked State pseudo default en default In Service 1 from-pstn en default In Service dahdi_scan returns: dahdi_scan [1] active=yes alarms=OK description=Wildcard TDM400P REV I Board 5 name=WCTDM/4 manufacturer=Digium devicetype=Wildcard TDM400P REV I location=PCI Bus 00 Slot 10 basechan=1 totchans=4 irq=209 type=analog port=1,FXO port=2,none port=3,none port=4,none And asterisk can see the channel: > trixbox1*CLI> dahdi show channel 1 > Channel: 1LI> File Descriptor: 14 > Span: 11*CLI> Extension: I> Dialing: > noI> Context: from-pstn Caller ID: I> > Calling TON: 0 Caller ID name: > Mailbox: none Destroy: 0LI> InAlarm: > 1LI> Signalling Type: FXS Kewlstart > Radio: 0*CLI> Owner: <None> Real: > <None>> Callwait: <None> Threeway: > <None> Confno: -1LI> Propagated > Conference: -1 Real in conference: 0 > DSP: no1*CLI> Busy Detection: no TDD: > no1*CLI> Relax DTMF: no > Dialing/CallwaitCAS: 0/0 Default law: > ulaw Fax Handled: no Pulse phone: no > DND: no1*CLI> Echo Cancellation: > trixbox1128 taps trixbox1(unless TDM > bridged) currently OFF Actual > Confinfo: Num/0, Mode/0x0000 Actual > Confmute: No > Hookstate (FXS only): Onhook A cat of /etc/asterisk/dahdi.conf shows: [trixbox1.localdomain ~]# cat /etc/asterisk/dahdi-channels.conf ; Autogenerated by /usr/sbin/dahdi_genconf on Tue May 25 17:45:13 2010 ; If you edit this file and execute /usr/sbin/dahdi_genconf again, ; your manual changes will be LOST. ; Dahdi Channels Configurations (chan_dahdi.conf) ; ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings ; ; Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER) ;;; line="1 WCTDM/4/0 FXSKS (SWEC: MG2)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 1 callerid= group= context=default I have configured a "ZAP Trunk (DAHDI compatibility Mode)" with the ZAP identifier 1 and an outbound route, but when ever I try to make an external call via it I get the "All Circuits are busy now, please try your call again later message". I have one outbound route which uses the dial pattern 9|. and the Trunk Zap/1 and one Zap Trunk which uses Zap Identifier (trunk name): 1 and has no Dial Rules. The FXO module is directly connected to our phone line from BT via a BT-RJ11 cable. When running tail -f /var/log/asterisk/full and placing a call I get the following output: [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP RTP TOS bits 184 [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP RTP CoS mark 5 [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP VRTP TOS bits 136 [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP VRTP CoS mark 6 [May 26 11:10:52] WARNING[2661] pbx.c: FONALITY: This thread has already held the conlock, skip locking [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:1] Macro("SIP/801-b7ce8c28", "user-callerid,SKIPTTL,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:1] Set("SIP/801-b7ce8c28", "AMPUSER=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:2] GotoIf("SIP/801-b7ce8c28", "0?report") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:3] ExecIf("SIP/801-b7ce8c28", "1?Set(REALCALLERIDNUM=801)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:4] Set("SIP/801-b7ce8c28", "AMPUSER=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:5] Set("SIP/801-b7ce8c28", "AMPUSERCIDNAME=Jona") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:6] GotoIf("SIP/801-b7ce8c28", "0?report") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:7] Set("SIP/801-b7ce8c28", "AMPUSERCID=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:8] Set("SIP/801-b7ce8c28", "CALLERID(all)="Jona" <801>") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:9] Set("SIP/801-b7ce8c28", "REALCALLERIDNUM=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:10] ExecIf("SIP/801-b7ce8c28", "0?Set(CHANNEL(language)=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:11] GotoIf("SIP/801-b7ce8c28", "1?continue") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-user-callerid,s,20) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:20] NoOp("SIP/801-b7ce8c28", "Using CallerID "Jona" <801>") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:2] Set("SIP/801-b7ce8c28", "_NODEST=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:3] Macro("SIP/801-b7ce8c28", "record-enable,801,OUT,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-record-enable:1] GotoIf("SIP/801-b7ce8c28", "1?check") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-record-enable,s,4) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-record-enable:4] AGI("SIP/801-b7ce8c28", "recordingcheck,20100526-111052,1274868652.1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck [May 26 11:10:52] VERBOSE[2858] logger.c: recordingcheck,20100526-111052,1274868652.1: Outbound recording not enabled [May 26 11:10:52] VERBOSE[2858] logger.c: -- <SIP/801-b7ce8c28>AGI Script recordingcheck completed, returning 0 [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-record-enable:5] MacroExit("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:4] Macro("SIP/801-b7ce8c28", "dialout-trunk,1,01483890915,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:1] Set("SIP/801-b7ce8c28", "DIAL_TRUNK=1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/801-b7ce8c28", "0?sub-pincheck,s,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/801-b7ce8c28", "0?disabletrunk,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:4] Set("SIP/801-b7ce8c28", "DIAL_NUMBER=01483890915") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:5] Set("SIP/801-b7ce8c28", "DIAL_TRUNK_OPTIONS=tr") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:6] Set("SIP/801-b7ce8c28", "OUTBOUND_GROUP=OUT_1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/801-b7ce8c28", "1?nomax") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-dialout-trunk,s,9) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/801-b7ce8c28", "0?skipoutcid") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:10] Set("SIP/801-b7ce8c28", "DIAL_TRUNK_OPTIONS=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:11] Macro("SIP/801-b7ce8c28", "outbound-callerid,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERPRES()=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/801-b7ce8c28", "0?Set(REALCALLERIDNUM=801)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/801-b7ce8c28", "1?normcid") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-outbound-callerid,s,6) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:6] Set("SIP/801-b7ce8c28", "USEROUTCID=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:7] Set("SIP/801-b7ce8c28", "EMERGENCYCID=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:8] Set("SIP/801-b7ce8c28", "TRUNKOUTCID=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/801-b7ce8c28", "1?trunkcid") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-outbound-callerid,s,12) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERID(all)=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERID(all)=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/801-b7ce8c28", "0?AGI(fixlocalprefix)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:13] Set("SIP/801-b7ce8c28", "OUTNUM=01483890915") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:14] Set("SIP/801-b7ce8c28", "custom=DAHDI/1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/801-b7ce8c28", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:16] Macro("SIP/801-b7ce8c28", "dialout-trunk-predial-hook,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/801-b7ce8c28", "0?bypass,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/801-b7ce8c28", "0?customtrunk") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:19] Dial("SIP/801-b7ce8c28", "DAHDI/1/01483890915,300,") in new stack [May 26 11:10:52] WARNING[2858] app_dial.c: Unable to create channel of type 'DAHDI' (cause 0 - Unknown) [May 26 11:10:52] VERBOSE[2858] logger.c: == Everyone is busy/congested at this time (1:0/0/1) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:20] Goto("SIP/801-b7ce8c28", "s-CHANUNAVAIL,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/801-b7ce8c28", "1?noreport") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/801-b7ce8c28", "TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 0) - failing through to other trunks") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:5] Macro("SIP/801-b7ce8c28", "outisbusy,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outisbusy:1] Playback("SIP/801-b7ce8c28", "all-circuits-busy-now,noanswer") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- <SIP/801-b7ce8c28> Playing 'all-circuits-busy-now.ulaw' (language 'en') [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-outisbusy:2] Playback("SIP/801-b7ce8c28", "pls-try-call-later,noanswer") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- <SIP/801-b7ce8c28> Playing 'pls-try-call-later.ulaw' (language 'en') [May 26 11:10:54] WARNING[2661] pbx.c: FONALITY: This thread has already held the conlock, skip locking [May 26 11:10:54] VERBOSE[2858] logger.c: == Spawn extension (macro-outisbusy, s, 2) exited non-zero on 'SIP/801-b7ce8c28' in macro 'outisbusy' [May 26 11:10:54] VERBOSE[2858] logger.c: == Spawn extension (from-internal, 901483890915, 5) exited non-zero on 'SIP/801-b7ce8c28' [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [h@from-internal:1] Macro("SIP/801-b7ce8c28", "hangupcall") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:1] ResetCDR("SIP/801-b7ce8c28", "vw") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:2] NoCDR("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:3] GotoIf("SIP/801-b7ce8c28", "1?skiprg") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Goto (macro-hangupcall,s,6) [May 26 11:10:55] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:6] GotoIf("SIP/801-b7ce8c28", "1?skipblkvm") in new stack [May 26 11:10:55] VERBOSE[2858] logger.c: -- Goto (macro-hangupcall,s,9) [May 26 11:10:55] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:9] GotoIf("SIP/801-b7ce8c28", "1?theend") in new stack [May 26 11:10:55] VERBOSE[2858] logger.c: -- Goto (macro-hangupcall,s,11) [May 26 11:10:55] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:11] Hangup("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:55] VERBOSE[2858] logger.c: == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/801-b7ce8c28' in macro 'hangupcall' [May 26 11:10:55] VERBOSE[2858] logger.c: == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/801-b7ce8c28' I'm guessing I've missed a configuration step somewhere but no idea where, any help greatly appreciated.

  Read the article

• IPsec tunnel to Android device not created even though there is an IKE SA

  - by Quentin Swain

  I'm trying to configure a VPN tunnel between an Android device running 4.1 and a Fedora 17 Linux box running strongSwan 5.0. The device reports that it is connected and strongSwan statusall returns that there is an IKE SA, but doesn't display a tunnel. I used the instructions for iOS in the wiki to generate certificates and configure strongSwan. Since Android uses a modified version of racoon this should work and since the connection is partly established I think I am on the right track. I don't see any errors about not being able to create the tunnel. This is the configuration for the strongSwan connection conn android2 keyexchange=ikev1 authby=xauthrsasig xauth=server left=96.244.142.28 leftsubnet=0.0.0.0/0 leftfirewall=yes leftcert=serverCert.pem right=%any rightsubnet=10.0.0.0/24 rightsourceip=10.0.0.2 rightcert=clientCert.pem ike=aes256-sha1-modp1024 auto=add This is the output of strongswan statusall Status of IKE charon daemon (strongSwan 5.0.0, Linux 3.3.4-5.fc17.x86_64, x86_64): uptime: 20 minutes, since Oct 31 10:27:31 2012 malloc: sbrk 270336, mmap 0, used 198144, free 72192 worker threads: 8 of 16 idle, 7/1/0/0 working, job queue: 0/0/0/0, scheduled: 7 loaded plugins: charon aes des sha1 sha2 md5 random nonce x509 revocation constraints pubkey pkcs1 pkcs8 pgp dnskey pem openssl fips-prf gmp xcbc cmac hmac attr kernel-netlink resolve socket-default stroke updown xauth-generic Virtual IP pools (size/online/offline): android-hybrid: 1/0/0 android2: 1/1/0 Listening IP addresses: 96.244.142.28 Connections: android-hybrid: %any...%any IKEv1 android-hybrid: local: [C=CH, O=strongSwan, CN=vpn.strongswan.org] uses public key authentication android-hybrid: cert: "C=CH, O=strongSwan, CN=vpn.strongswan.org" android-hybrid: remote: [%any] uses XAuth authentication: any android-hybrid: child: dynamic === dynamic TUNNEL android2: 96.244.142.28...%any IKEv1 android2: local: [C=CH, O=strongSwan, CN=vpn.strongswan.org] uses public key authentication android2: cert: "C=CH, O=strongSwan, CN=vpn.strongswan.org" android2: remote: [C=CH, O=strongSwan, CN=client] uses public key authentication android2: cert: "C=CH, O=strongSwan, CN=client" android2: remote: [%any] uses XAuth authentication: any android2: child: 0.0.0.0/0 === 10.0.0.0/24 TUNNEL Security Associations (1 up, 0 connecting): android2[3]: ESTABLISHED 10 seconds ago, 96.244.142.28[C=CH, O=strongSwan, CN=vpn.strongswan.org]...208.54.35.241[C=CH, O=strongSwan, CN=client] android2[3]: Remote XAuth identity: android android2[3]: IKEv1 SPIs: 4151e371ad46b20d_i 59a56390d74792d2_r*, public key reauthentication in 56 minutes android2[3]: IKE proposal: AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024 The output of ip -s xfrm policy src ::/0 dst ::/0 uid 0 socket in action allow index 3851 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src ::/0 dst ::/0 uid 0 socket out action allow index 3844 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src ::/0 dst ::/0 uid 0 socket in action allow index 3835 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src ::/0 dst ::/0 uid 0 socket out action allow index 3828 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket in action allow index 3819 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:39 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket out action allow index 3812 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:22 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket in action allow index 3803 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:20 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket out action allow index 3796 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:20 So a xfrm policy isn't being created for the connection, even though there is an SA between device and strongswan. Executing ip -s xfrm policy on the android device results in the following output: src 0.0.0.0/0 dst 10.0.0.2/32 uid 0 dir in action allow index 40 priority 2147483648 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:08 use - tmpl src 96.244.142.28 dst 25.239.33.30 proto esp spi 0x00000000(0) reqid 0(0x00000000) mode tunnel level required share any enc-mask 00000000 auth-mask 00000000 comp-mask 00000000 src 10.0.0.2/32 dst 0.0.0.0/0 uid 0 dir out action allow index 33 priority 2147483648 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:08 use - tmpl src 25.239.33.30 dst 96.244.142.28 proto esp spi 0x00000000(0) reqid 0(0x00000000) mode tunnel level required share any enc-mask 00000000 auth-mask 00000000 comp-mask 00000000 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 4 action allow index 28 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:08 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 3 action allow index 19 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:08 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 4 action allow index 12 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:06 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 3 action allow index 3 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:07 Logs from charon: 00[DMN] Starting IKE charon daemon (strongSwan 5.0.0, Linux 3.3.4-5.fc17.x86_64, x86_64) 00[KNL] listening on interfaces: 00[KNL] em1 00[KNL] 96.244.142.28 00[KNL] fe80::224:e8ff:fed2:18b2 00[CFG] loading ca certificates from '/etc/strongswan/ipsec.d/cacerts' 00[CFG] loaded ca certificate "C=CH, O=strongSwan, CN=strongSwan CA" from '/etc/strongswan/ipsec.d/cacerts/caCert.pem' 00[CFG] loading aa certificates from '/etc/strongswan/ipsec.d/aacerts' 00[CFG] loading ocsp signer certificates from '/etc/strongswan/ipsec.d/ocspcerts' 00[CFG] loading attribute certificates from '/etc/strongswan/ipsec.d/acerts' 00[CFG] loading crls from '/etc/strongswan/ipsec.d/crls' 00[CFG] loading secrets from '/etc/strongswan/ipsec.secrets' 00[CFG] loaded RSA private key from '/etc/strongswan/ipsec.d/private/clientKey.pem' 00[CFG] loaded IKE secret for %any 00[CFG] loaded EAP secret for android 00[CFG] loaded EAP secret for android 00[DMN] loaded plugins: charon aes des sha1 sha2 md5 random nonce x509 revocation constraints pubkey pkcs1 pkcs8 pgp dnskey pem openssl fips-prf gmp xcbc cmac hmac attr kernel-netlink resolve socket-default stroke updown xauth-generic 08[NET] waiting for data on sockets 16[LIB] created thread 16 [15338] 16[JOB] started worker thread 16 11[CFG] received stroke: add connection 'android-hybrid' 11[CFG] conn android-hybrid 11[CFG] left=%any 11[CFG] leftsubnet=(null) 11[CFG] leftsourceip=(null) 11[CFG] leftauth=pubkey 11[CFG] leftauth2=(null) 11[CFG] leftid=(null) 11[CFG] leftid2=(null) 11[CFG] leftrsakey=(null) 11[CFG] leftcert=serverCert.pem 11[CFG] leftcert2=(null) 11[CFG] leftca=(null) 11[CFG] leftca2=(null) 11[CFG] leftgroups=(null) 11[CFG] leftupdown=ipsec _updown iptables 11[CFG] right=%any 11[CFG] rightsubnet=(null) 11[CFG] rightsourceip=96.244.142.3 11[CFG] rightauth=xauth 11[CFG] rightauth2=(null) 11[CFG] rightid=%any 11[CFG] rightid2=(null) 11[CFG] rightrsakey=(null) 11[CFG] rightcert=(null) 11[CFG] rightcert2=(null) 11[CFG] rightca=(null) 11[CFG] rightca2=(null) 11[CFG] rightgroups=(null) 11[CFG] rightupdown=(null) 11[CFG] eap_identity=(null) 11[CFG] aaa_identity=(null) 11[CFG] xauth_identity=(null) 11[CFG] ike=aes256-sha1-modp1024 11[CFG] esp=aes128-sha1-modp2048,3des-sha1-modp1536 11[CFG] dpddelay=30 11[CFG] dpdtimeout=150 11[CFG] dpdaction=0 11[CFG] closeaction=0 11[CFG] mediation=no 11[CFG] mediated_by=(null) 11[CFG] me_peerid=(null) 11[CFG] keyexchange=ikev1 11[KNL] getting interface name for %any 11[KNL] %any is not a local address 11[KNL] getting interface name for %any 11[KNL] %any is not a local address 11[CFG] left nor right host is our side, assuming left=local 11[CFG] loaded certificate "C=CH, O=strongSwan, CN=vpn.strongswan.org" from 'serverCert.pem' 11[CFG] id '%any' not confirmed by certificate, defaulting to 'C=CH, O=strongSwan, CN=vpn.strongswan.org' 11[CFG] added configuration 'android-hybrid' 11[CFG] adding virtual IP address pool 'android-hybrid': 96.244.142.3/32 13[CFG] received stroke: add connection 'android2' 13[CFG] conn android2 13[CFG] left=96.244.142.28 13[CFG] leftsubnet=0.0.0.0/0 13[CFG] leftsourceip=(null) 13[CFG] leftauth=pubkey 13[CFG] leftauth2=(null) 13[CFG] leftid=(null) 13[CFG] leftid2=(null) 13[CFG] leftrsakey=(null) 13[CFG] leftcert=serverCert.pem 13[CFG] leftcert2=(null) 13[CFG] leftca=(null) 13[CFG] leftca2=(null) 13[CFG] leftgroups=(null) 13[CFG] leftupdown=ipsec _updown iptables 13[CFG] right=%any 13[CFG] rightsubnet=10.0.0.0/24 13[CFG] rightsourceip=10.0.0.2 13[CFG] rightauth=pubkey 13[CFG] rightauth2=xauth 13[CFG] rightid=(null) 13[CFG] rightid2=(null) 13[CFG] rightrsakey=(null) 13[CFG] rightcert=clientCert.pem 13[CFG] rightcert2=(null) 13[CFG] rightca=(null) 13[CFG] rightca2=(null) 13[CFG] rightgroups=(null) 13[CFG] rightupdown=(null) 13[CFG] eap_identity=(null) 13[CFG] aaa_identity=(null) 13[CFG] xauth_identity=(null) 13[CFG] ike=aes256-sha1-modp1024 13[CFG] esp=aes128-sha1-modp2048,3des-sha1-modp1536 13[CFG] dpddelay=30 13[CFG] dpdtimeout=150 13[CFG] dpdaction=0 13[CFG] closeaction=0 13[CFG] mediation=no 13[CFG] mediated_by=(null) 13[CFG] me_peerid=(null) 13[CFG] keyexchange=ikev0 13[KNL] getting interface name for %any 13[KNL] %any is not a local address 13[KNL] getting interface name for 96.244.142.28 13[KNL] 96.244.142.28 is on interface em1 13[CFG] loaded certificate "C=CH, O=strongSwan, CN=vpn.strongswan.org" from 'serverCert.pem' 13[CFG] id '96.244.142.28' not confirmed by certificate, defaulting to 'C=CH, O=strongSwan, CN=vpn.strongswan.org' 13[CFG] loaded certificate "C=CH, O=strongSwan, CN=client" from 'clientCert.pem' 13[CFG] id '%any' not confirmed by certificate, defaulting to 'C=CH, O=strongSwan, CN=client' 13[CFG] added configuration 'android2' 13[CFG] adding virtual IP address pool 'android2': 10.0.0.2/32 08[NET] received packet: from 208.54.35.241[32235] to 96.244.142.28[500] 15[CFG] looking for an ike config for 96.244.142.28...208.54.35.241 15[CFG] candidate: %any...%any, prio 2 15[CFG] candidate: 96.244.142.28...%any, prio 5 15[CFG] found matching ike config: 96.244.142.28...%any with prio 5 01[JOB] next event in 29s 999ms, waiting 15[IKE] received NAT-T (RFC 3947) vendor ID 15[IKE] received draft-ietf-ipsec-nat-t-ike-02 vendor ID 15[IKE] received draft-ietf-ipsec-nat-t-ike-02\n vendor ID 15[IKE] received draft-ietf-ipsec-nat-t-ike-00 vendor ID 15[IKE] received XAuth vendor ID 15[IKE] received Cisco Unity vendor ID 15[IKE] received DPD vendor ID 15[IKE] 208.54.35.241 is initiating a Main Mode IKE_SA 15[IKE] IKE_SA (unnamed)[1] state change: CREATED => CONNECTING 15[CFG] selecting proposal: 15[CFG] proposal matches 15[CFG] received proposals: IKE:AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:AES_CBC_256/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024, IKE:AES_CBC_128/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:AES_CBC_128/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024, IKE:3DES_CBC/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:3DES_CBC/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024, IKE:DES_CBC/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:DES_CBC/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024 15[CFG] configured proposals: IKE:AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:AES_CBC_128/AES_CBC_192/AES_CBC_256/3DES_CBC/CAMELLIA_CBC_128/CAMELLIA_CBC_192/CAMELLIA_CBC_256/HMAC_MD5_96/HMAC_SHA1_96/HMAC_SHA2_256_128/HMAC_SHA2_384_192/HMAC_SHA2_512_256/AES_XCBC_96/AES_CMAC_96/PRF_HMAC_MD5/PRF_HMAC_SHA1/PRF_HMAC_SHA2_256/PRF_HMAC_SHA2_384/PRF_HMAC_SHA2_512/PRF_AES128_XCBC/PRF_AES128_CMAC/MODP_2048/MODP_2048_224/MODP_2048_256/MODP_1536/MODP_4096/MODP_8192/MODP_1024/MODP_1024_160 15[CFG] selected proposal: IKE:AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024 15[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 04[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 15[MGR] checkin IKE_SA (unnamed)[1] 15[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[32235] to 96.244.142.28[500] 08[NET] waiting for data on sockets 07[MGR] checkout IKE_SA by message 07[MGR] IKE_SA (unnamed)[1] successfully checked out 07[NET] received packet: from 208.54.35.241[32235] to 96.244.142.28[500] 07[LIB] size of DH secret exponent: 1023 bits 07[IKE] remote host is behind NAT 07[IKE] sending cert request for "C=CH, O=strongSwan, CN=strongSwan CA" 07[ENC] generating NAT_D_V1 payload finished 07[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 07[MGR] checkin IKE_SA (unnamed)[1] 07[MGR] check-in of IKE_SA successful. 04[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 10[IKE] ignoring certificate request without data 10[IKE] received end entity cert "C=CH, O=strongSwan, CN=client" 10[CFG] looking for XAuthInitRSA peer configs matching 96.244.142.28...208.54.35.241[C=CH, O=strongSwan, CN=client] 10[CFG] candidate "android-hybrid", match: 1/1/2/2 (me/other/ike/version) 10[CFG] candidate "android2", match: 1/20/5/1 (me/other/ike/version) 10[CFG] selected peer config "android2" 10[CFG] certificate "C=CH, O=strongSwan, CN=client" key: 2048 bit RSA 10[CFG] using trusted ca certificate "C=CH, O=strongSwan, CN=strongSwan CA" 10[CFG] checking certificate status of "C=CH, O=strongSwan, CN=client" 10[CFG] ocsp check skipped, no ocsp found 10[CFG] certificate status is not available 10[CFG] certificate "C=CH, O=strongSwan, CN=strongSwan CA" key: 2048 bit RSA 10[CFG] reached self-signed root ca with a path length of 0 10[CFG] using trusted certificate "C=CH, O=strongSwan, CN=client" 10[IKE] authentication of 'C=CH, O=strongSwan, CN=client' with RSA successful 10[ENC] added payload of type ID_V1 to message 10[ENC] added payload of type SIGNATURE_V1 to message 10[IKE] authentication of 'C=CH, O=strongSwan, CN=vpn.strongswan.org' (myself) successful 10[IKE] queueing XAUTH task 10[IKE] sending end entity cert "C=CH, O=strongSwan, CN=vpn.strongswan.org" 10[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 10[IKE] activating new tasks 10[IKE] activating XAUTH task 10[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 01[JOB] next event in 3s 999ms, waiting 10[MGR] checkin IKE_SA android2[1] 10[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 08[NET] waiting for data on sockets 12[MGR] checkout IKE_SA by message 12[MGR] IKE_SA android2[1] successfully checked out 12[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 12[MGR] checkin IKE_SA android2[1] 12[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 16[MGR] checkout IKE_SA by message 16[MGR] IKE_SA android2[1] successfully checked out 16[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 08[NET] waiting for data on sockets 16[IKE] XAuth authentication of 'android' successful 16[IKE] reinitiating already active tasks 16[IKE] XAUTH task 16[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 16[MGR] checkin IKE_SA android2[1] 01[JOB] next event in 3s 907ms, waiting 16[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 09[MGR] checkout IKE_SA by message 09[MGR] IKE_SA android2[1] successfully checked out 09[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] .8rS 09[IKE] IKE_SA android2[1] established between 96.244.142.28[C=CH, O=strongSwan, CN=vpn.strongswan.org]...208.54.35.241[C=CH, O=strongSwan, CN=client] 09[IKE] IKE_SA android2[1] state change: CONNECTING => ESTABLISHED 09[IKE] scheduling reauthentication in 3409s 09[IKE] maximum IKE_SA lifetime 3589s 09[IKE] activating new tasks 09[IKE] nothing to initiate 09[MGR] checkin IKE_SA android2[1] 09[MGR] check-in of IKE_SA successful. 09[MGR] checkout IKE_SA 09[MGR] IKE_SA android2[1] successfully checked out 09[MGR] checkin IKE_SA android2[1] 09[MGR] check-in of IKE_SA successful. 01[JOB] next event in 3s 854ms, waiting 08[NET] waiting for data on sockets 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 14[MGR] checkout IKE_SA by message 14[MGR] IKE_SA android2[1] successfully checked out 14[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 14[IKE] processing INTERNAL_IP4_ADDRESS attribute 14[IKE] processing INTERNAL_IP4_NETMASK attribute 14[IKE] processing INTERNAL_IP4_DNS attribute 14[IKE] processing INTERNAL_IP4_NBNS attribute 14[IKE] processing UNITY_BANNER attribute 14[IKE] processing UNITY_DEF_DOMAIN attribute 14[IKE] processing UNITY_SPLITDNS_NAME attribute 14[IKE] processing UNITY_SPLIT_INCLUDE attribute 14[IKE] processing UNITY_LOCAL_LAN attribute 14[IKE] processing APPLICATION_VERSION attribute 14[IKE] peer requested virtual IP %any 14[CFG] assigning new lease to 'android' 14[IKE] assigning virtual IP 10.0.0.2 to peer 'android' 14[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 14[MGR] checkin IKE_SA android2[1] 14[MGR] check-in of IKE_SA successful. 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 08[NET] waiting for data on sockets 01[JOB] got event, queuing job for execution 01[JOB] next event in 91ms, waiting 13[MGR] checkout IKE_SA 13[MGR] IKE_SA android2[1] successfully checked out 13[MGR] checkin IKE_SA android2[1] 13[MGR] check-in of IKE_SA successful. 01[JOB] got event, queuing job for execution 01[JOB] next event in 24s 136ms, waiting 15[MGR] checkout IKE_SA 15[MGR] IKE_SA android2[1] successfully checked out 15[MGR] checkin IKE_SA android2[1] 15[MGR] check-in of IKE_SA successful.

  Read the article

• Android 1.6: "android.view.WindowManager$BadTokenException: Unable to add window -- token null is no

  - by Dan Monego

  I'm trying to open a dialog window, but every time I try to open it it throws this exception: E/AndroidRuntime( 206): Uncaught handler: thread main exiting due to uncaught exception E/AndroidRuntime( 206): android.view.WindowManager$BadTokenException: Unable to add window -- token null is not for an application E/AndroidRuntime( 206): at android.view.ViewRoot.setView(ViewRoot.java:460) E/AndroidRuntime( 206): at android.view.WindowManagerImpl.addView(WindowManagerImpl.java:177) E/AndroidRuntime( 206): at android.view.WindowManagerImpl.addView(WindowManagerImpl.java:91) E/AndroidRuntime( 206): at android.app.Dialog.show(Dialog.java:238) E/AndroidRuntime( 206): at android.app.Activity.showDialog(Activity.java:2413) I'm creating it by calling showDialog with the display's id. The onCreateDialog handler logs fine and I can step through it without an issue, but I've attached since it seems like I'm missing something in it: @Override public Dialog onCreateDialog(int id) { Dialog dialog; Context appContext = this.getApplicationContext(); switch(id) { case RENAME_DIALOG_ID: Log.i("Edit", "Creating rename dialog..."); dialog = new Dialog(appContext); dialog.setContentView(R.layout.rename); dialog.setTitle("Rename " + noteName); break; default: dialog = null; break; } return dialog; } Is there something missing from this? Some questions have talked about having this problem when creating a dialog from onCreate, which happen because the activity isn't created yet, but this is coming from a call from a menu object, and the appContext variable seems like it is correctly populated in the debugger.

  Read the article

< Previous Page | 355 356 357 358 359 360 361 362 363 364 365 366  | Next Page >