Search Results

Search found 3195 results on 128 pages for 'rob paul'.

Page 36/128 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

  • New monitor connected to HDMI adaptor doesn't show output after booting

    - by Paul
    Hello out there in the multiple monitors’ world. I am a very old newbie in your world and need help. I just purchased a new Asus VH236H monitor and hooked it up the HDMI port of an ATI Radeon HD4300 / 4500 Series display adaptor. I left the old Princeton LCD19 (TMDS) hooked up to the DVI port of the same display adaptor. Both monitors displayed the boot sequence, after I fired good old Sarastro2 (Asus P5Q Pro Turbo – Dual Core E5300 – 2.60 GHz) up. The Asus lacked one half of a second behind the Princeton until the Windows 7 Ultimate SP 1 boot up was complete. Then the Asus displayed “HDMI NO SIGNAL” and went into hibernation. The Princeton stayed lit up as before. Both monitors are displayed on the “Screen Resolution Setup Display” and I plaid around with them for a while. The only thing I accomplished was to shove the desktop icons from the Princeton to the still hibernating Asus. The “Multiple displays:” is set to “Extend these displays”, the Orientation is “Landscape” and the Resolutions are set on both to the “recommended” one. Both monitors show that they work properly in the advanced Properties display. What am I doing wrong, what am I missing? Never mind the opinions about the different resolutions of the two monitors. I always can unhook the Princeton and give it to a Goodwill Store if I do not like the setup. I just would like to make it work. Any constructive help is very much appreciated, Thank you.

    Read the article

  • cmd.exe version comparison?

    - by Paul
    When using batch files or console applications on Windows servers the window in question can allow text to be hightlighted (marked) for copying and pasting. Doing this pauses the batch/application and it will only resume after the copy operation. Or this is what I thought to be true. Recently on a Windows 2003 R2 SP2 server I noted that whilst the scrolling was paused the operations were not. Does anyone know if my description in the 1st para is true for older windows is not true for Windows 2003 R2 SP2 when it changed a full version comparison table for cmd.exe across different OS' ? Thanks for reading (Windows 2000 tag as that was the OS I used most before 2003 R2)

    Read the article

  • Windows 8 shortcut keys via RDP

    - by Paul
    It is possible to access any of the new shortcut keys found in Windows 8 via RDP, such as those in the accepted answer in What are the new shortcuts for Windows 8?, without having to redirect all Win key combinations through to the remote session. I am using both local and remote at the same time, and so would prefer alternate shortcuts for the remote session. Such as the basic ones listed at the Microsoft site here, and for example Alt+Home will return you to the Start screen. What about the more interesting shortcuts?

    Read the article

  • Exporting Speed Dial settings from within Firefox into Chrome Speed dial...

    - by Paul
    Win7 Home Prem 32-bit I usually use Firefox as my browser of choice and have been using the Addin Speed Dial for ages. I have many sites added on multiple tabs within it. I have just installed the Google Chrome browser which also has the Speed Dial Extension. Is there a way to export/import/copy/sync my Speed Dial settings i have in Firefox to the Speed Dial extension in Chrome? I know i can export from Speed Dial in Firefox but can't see any easy way to import from Speed Dial in Chrome.

    Read the article

  • Determine the time difference between two linux servers

    - by Paul
    I am troubleshooting a latency network issue on a network. It is probably a nic or cabling issue, but while I was going through the process of figuring it out, I was looking at the timings of a ping packet leaving a network card and arriving at another server. Both linux. So I have tcpdump running on both, and I issue a ping from one to the other, and back again, and looking at the timing differences might have shed light on where the latency is coming from. It is an academic exercise now, as I need to eliminate some more fundamental causes, but I was curious as to how this could be achieved. Given that ntpd is installed and running on two servers, how can I confirm the current time discrepency between the two servers, to whatever level of accuracy is possible - given that we are talking about latency on a local lan, which is ideally a millisecond or so. NTP itself is accurate to a couple of ms under good conditions, and as both servers are in the same environment, they should (presumably) achieve a similar level of accuracy, and so should have a time discrepency between them of a only few ms - but how can I check this?

    Read the article

  • How can I connect a Windows 8 PC to a Samba domain

    - by Paul
    I am using Samba 3, and want to join my Windows 8 PC to the Samba domain. Windows 8 cannot join out of the box, so I added the following registry entries: HKLM\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters DWORD DomainCompatibilityMode 1 DWORD DNSNameResolutionRequired 0 And now it talks to the Samba server ok, however I get the following error: And I notice that the machine name created on the samba server does not match its name: win-8jq3fg1n74e$:x:30003:30003:Machine:/var/lib/nobody:/bin/false It is like it is using an internal name. The following is the error in the smb.log [2012/10/21 14:26:16.099520, 0] passdb/pdb_interface.c:348(pdb_default_create_user) _samr_create_user: Running the command `/usr/sbin/useradd -c Machine -d /var/lib/nobody -s /bin/false win-8jq3fg1n74e$' gave 9 [2012/10/21 14:26:28.143224, 0] lib/util_sock.c:474(read_fd_with_timeout) [2012/10/21 14:26:28.143420, 0] lib/util_sock.c:1441(get_peer_addr_internal) getpeername failed. Error was Transport endpoint is not connected read_fd_with_timeout: client 0.0.0.0 read error = Connection reset by peer.

    Read the article

  • What VNC (or similar) software for Windows 7 Home allows me to control my parents’ computer remotely as an administrator user?

    - by Paul D. Waite
    Here’s what I dream of: I install Windows 7 Home on my parents’ PC. They have a regular user account that they use, meaning they can’t install anything. I have an administrator account, meaning I can install things for them. I install some sort of VNC software on their machine that lets me access their computer remotely under the administrator account, so that I can install software for them (or do other administrator tasks, e.g. updates) without actually going to their house. Is there any VNC or VNC-like software that supports the above? (I guess I might be better off buying them Windows 7 Professional, and using Remote Desktop. At some point I’ll give up and get them an iPad, but for now, remote Windows admin is the dream.)

    Read the article

  • If spambots are filling out forms on my website, should I mark the mail as spam?

    - by rob
    Apparently spambots have discovered the contact forms my website. I'm considering adding a CAPTCHA, but in the meantime I've been getting dozens of completed website forms in my Gmail account each day. I know I can configure a filter to always allow e-mails from my website to be delivered (i.e., "never send to spam"), but I'm wondering whether there are also larger implications. At first, I was marking the spam forms as spam because I figured it would block the sender's e-mail address from getting through again. But since then, I've given it some more thought. I know many spam filters use Bayesian filters and other techniques to identify spam based on its content. If I mark all these e-mails as spam, will legitimate e-mails from my website be marked as spam? Even if I stop marking the messages as spam, I can see another potential problem. My form is pretty standard (in fact, it's probably very similar to other online forms). If I mark my spambot-submitted website forms as spam, will Gmail begin to mark other people's similar-looking messages as spam?

    Read the article

  • APC Smart UPS network shutdown issue

    - by Rob Clarke
    Here is a bit about our setup: We have 2x Smart-UPS RT 6000 XL units with network management cards We are running Powerchute from a network server Powerchute is connected to the management cards of both UPSs UPSs are set to do a graceful shutdown via Powerchute when the battery duration is under 20 minutes We also have a command file that runs with Powerchute Although our setup is redundant we do not have an equal load on each server due to APC switches for single power devices The problem is that as we do not have an equal load on each server the batteries drain at different rates. This means that the UPSs both get to the specified low battery duration at completely different times. The problem here is that UPS 1 may have run down to 5 minutes and is in desperate need of initiating a Powerchute shutdown - UPS 2 still has 25 minutes of runtime so no shutdown is initiated. Consequently UPS 1 goes down and takes all the servers with and then shuts down UPS 2 as well! What we need to happen are 1 of either 2 things: Powerchute initiates the shutdown as soon as either UPS reaches the 20 minutes low battery duration setting - and doesnt wait for both The UPS with the heavier load expends its entire battery but does not shutdown both UPSs and lets the load be switched across to the UPS that still has runtime remaining. That way when the UPS that still has runtime reaches its low battery duration it can proceed with the graceful shutdown via Powerchute. Hope that makes sense, any help is greatly appreciated!

    Read the article

  • Install 64-bit Windows 7 on Mac Using Bootcamp

    - by Paul Lefebvre
    Has anyone been able to install Windows 7 x64 under Bootcamp on a Mac? I was able to get the 32-bit version to install, but I cannot get x64 to install. The Mac doesn't seem to even want to boot the DVD. And even if I get it installed are there drivers that will work with it? I'd prefer to have Windows 7 x64 because I'd like to use the entire 6GB RAM in my MacBook Pro. I'd appreciate any tips or advice.

    Read the article

  • Split horizon, route filtering, and having RIPv2 announce a non-attached route to host...

    - by Paul
    Routers A, B & C live at 10.1.1.1, 10.1.1.2 and 10.1.1.3 on a /24 metro Ethernet subnet. Each router also has its own private subnet on another interface. Router B's private subnet links thru a firewall to a 10.20.20.0 network at another organization. Router B redistributes to A and C several static routes for hosts on 10.20.20.0. However, a new host 10.20.20.5/32 must be reached via a different path that goes through router C. I know that C can advertise this host-based route with no problem, but I'd like to keep all my 10.20.20.x static routes in one place. So, how can B tell A via RIPv2 to send packets for 10.20.20.5/32 to C? So far it looks like I need no ip split-horizon on router B's 10.1.1.2 interface, perhaps because B has already learned from C other routes with a next hop of 10.1.1.3. But how does RIPv2 split horizon with no auto-summary and network 10.0.0.0 really work? If B learns a route to ANY 10.x.x.x network or host from A or C, is that enough for split horizon to keep it from redistributing ip route 10.20.20.5 255.255.255.255 10.1.1.3? And if I want to suspend split horizon only for this one new host, how do I filter out the mess of regurgitated routes that B advertises when I try no ip split-horizon? Thanks much.

    Read the article

  • "Snapping" when in RDP

    - by Paul
    I am using mstsc.exe version 6.0 (Remote Desktop non-Metro version) from an XP machine and cannot get Windows 8 snapping to work. I can drag a metro app window to the left or right, but it doesn't stick, it just bounces back to full screen. The snap bars do not appear. The client PC has two monitors, each with a resolution of 1280x1024. While mstsc.exe 6.0 does have an option to use both monitors simultaneously in normal settings, I am launching it with spanning enabled: mstsc.exe /span So the effective resolution in the session is 2560x1024. Is there a trick to getting this to work over RDP?

    Read the article

  • Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.

    - by Paul J. Warner
    I am having an issue with a program where after 6 mins +- 5 secs we get the above exception. Some more info about the exception stacktrace is below. This all happens pretty religiously, 6 mins goes by and bam the following 3 exeptions. We have the application installed in 2 other environments and it is working fine there. I am hoping to find some server settings either IIS 6 or Server 2003 settings that may be causing this issue to occur. I have reviewed some of the similar questions and don't see very many answers. I am hoping that maybe the information I have provided may help a little bit. 208741,Exception,,,,2011-06-21 00:30:14.193,SERVERNAME,2624,1,CLIENTNAME,The underlying connection was closed: An unexpected error occurred on a receive. , at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request) at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request) at Microsoft.Web.Services3.WebServicesClientProtocol.GetResponse(WebRequest request, IAsyncResult result) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security._SslStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.StartReading(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.TlsStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead),2004437127,114,1 208742,Exception,,,,2011-06-21 00:30:14.227,SERVERNAME,2624,1,CLIENTNAME,Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. , at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security._SslStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.StartReading(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.TlsStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead),2004437127,114,1 208743,Exception,,,,2011-06-21 00:30:14.287,SERVERNAME,2624,1,CLIENTNAME,An existing connection was forcibly closed by the remote host , at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size),-691097507,62,1

    Read the article

  • Slow parity initialization of RAID-5 array on HP Smart Array 411 controller

    - by Rob Nicholson
    On 29th October 2011, I built a RAID-5 array using 4 x 146.8GB Seagate SAS ST3146855SS drives running at 15k connected to a PowerEdge R515 with HP Smart Array P411 controller running Windows 2008 (so nothing particularly unusual). I know that parity initialisation of a RAID-5 array can take some time but it's still running after 2.5 weeks which seems a little unusual. I'd previously built another array on the same controller using 4 x 2TB SATA-2 drives and that did take a while to complete but a) I'm sure it was less than 2.5 weeks, b) that array was ~12 times bigger and c) during initialization, the percentrage slowly increased each day. At the moment, the status display for this new 2nd array simply says "Parity Initialization Status: In Progress" and it's said that since the start. It's this lack of change on the status that worries me the most - feels like it's not actually doing anything. Do you think something has gone wrong or am I being unpatient and for some reason, the status not increasing is normal? I kind of expected a much smaller array on faster drives (15k SAS versus 7.5k SATA-2) to build in a few days. This is our primary SAN running StarWind so my "have a play" options are very limited. This 2nd array is currently in use for one small virtual disk so I could shut the target machine down, move the virtual disk to another drive and try rebuilding.

    Read the article

  • How does Brocade (Foundry) FastIron CX compare to Cisco 3750 stackable switches?

    - by Paul
    We're considering Brocade's CX series vs. Cisco's 3750 at both core and distribution layers for a new site with gig to desktop, without POE. If you have any hands-on experience with FastIron CX switches, I would greatly value your impressions. I'll gladly add mine to the discussion when we get some quality time with our eval units (one just arrived yesterday, another's on the way). Thank you!

    Read the article

  • Multiple domains, Exchange 2010, mailbox access via OWA

    - by Rob
    We currently run two separate domains where our new implementation of exchange 2010 is currently on a separate domain the users. My problem is: [email protected] cant access his mailbox at joe@domainb via OWA even though full access and sendas has been granted on domainb's mailbox to domaina's account. I keep receiving the error: Access is denied. The Active Directory resource couldn't be accessed. This may be because the Active Directory object doesn't exist or the object has become corrupted, or because you don't have the correct permissions. anyone able to help please? Take care

    Read the article

  • Internet (Flash) video without a PC

    - by Rob Allen
    I am looking to retire my HTPC. So much of what we do with it can be done with one of our video game consoles or an AppleTV that is seems like a waste of space, power and time to maintain. The trouble is that my wife does streaming yoga classes served up via specific websites. I am assuming they are Flash based and so far I have been unable to find Apps for these content providers. My question is, is there a GOOD way to handle flash-based or even HTML5/h.264 web content with one of the other Internet enabled devices in our stack? So far we have: Nintendo Wii Playstation 3 XBox 360 And we're looking to purchase a current generation AppleTV. update The sites are YogisAnonymmous.com and YogaJournal.com, both are confirmed as Flash.

    Read the article

  • Remove English - United States language from Firefox

    - by Paul
    How do I remove the English (United States) dictionary from Firefox? It's not an add-on so I'm guessing it's built into Firefox by default. Maybe that makes it unremovable? I noticed whilst typing a Hotmail email in Firefox that the default language seems to be English/United States. As I am from the UK I thought I would add in the English/United Kingdom dictionary, which I have. This is now the default language and I don't need the US dictionary. Firefox 3.6.2 on Windows 7 Home Premium 32 bit.

    Read the article

  • Windows 7 File Associations .mov

    - by Paul Mung
    I created a new windows 7 SP1 base image. Everything is all fine and dandy with that. So i am now installing standard applications I would like Quicktime to manage .mov files. The only problem is WMP (Windows Media Player) won't give up the association to .mov files. It's driving me crazy... i've been reading threads on how to fix file associations. I would like to do it via registry, powershell or cmdline. I cannot use GPO I've tried the following: assoc .mov=QuickTime.mov ftype QuickTime.mov="%ProgramFiles(x86)\QuickTime\QuickTimePlayer.exe" Reg add HKCU\Software\Microsoft\windows\CurrentVersion\Explorere\FileExts\.mov\UserChoice" /v Progid /d QuickTime.mov /f Reg add HKCU\Software\Microsoft\windows\CurrentVersion\Explorere\FileExts\.mov\OpenWithList" /v a /d QuickTimePlayer.exe /f Reg add "HKCU\Software\Microsoft\windows\CurrentVersion\Explorere\FileExts\.mov\OpenWithList" /v b /d wmplayer.exe /f Reg add HKCU\Software\Microsoft\windows\CurrentVersion\Explorere\FileExts\.mov\OpenWithList" /v MRUList /d ab /f Reg add HKCU\Software\Microsoft\windows\CurrentVersion\Explorere\FileExts\.mov\OpenWithProgids" /v Quicktime.mov /t REG_NONE /d 0000 /f Reg add HKCU\Software\Microsoft\windows\CurrentVersion\Explorere\FileExts\.mov\OpenWithProgids" /v WMP11.AssocFile.MOV /t REG_NONE /d 0000 /f

    Read the article

  • Process files in a folder that haven't previously been processed

    - by Paul
    I have a series of files in a directory that I need to carry an action out on using a script. Once the action is done, then I want to keep a log that the file has been processed, so that the next time the script is run, it does not attempt to carry out the action again. So lets say I can find all the files that should be processed like this: for i in `find /logfolder -name '20*.log'` ; do process_log $i echo $i >> processedlogsfile done So I have a file containing the logs I have processed, and my goal would be to modify the for loop such that these processed logs are not processed a second time. Doing a manual scan each time seems inefficient, particularly as the processedlogfiles gets bigger: if grep -iq "$i" processdlogfiles ; then continue; fi It would be good if these files could be excluded when setting up the for loop. Note that the OS in question is a linux derivative, a managment appliance, with a limited toolset (no attr command for example) and so no way to install additional utilities (well it is possible but not an option). Most common bash shell commands are available though. Also, the filenames and locations of the processed files must remain where they are - they can't be altered to reflect their processed status

    Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >