Search Results

Search found 12084 results on 484 pages for 'django core'.

Page 361/484 | < Previous Page | 357 358 359 360 361 362 363 364 365 366 367 368  | Next Page >

• How can I install from a 9.04 live USB/DVD?

  - by bstpierre

  I have a 9.04 (Jaunty) ISO burned to a USB stick; it appears to be a "live DVD". When I boot from it, I get a GRUB menu listing: Ubuntu, with Linux 2.6.35-generic (This matches the system currently installed on the HDD?) Ubuntu, with Linux 2.6.35-generic (recovery mode) Memory test Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1) Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sda1) Ubuntu 9.04, memtest86+ (on /dev/sda1) When I select Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1), I arrive at the desktop of a 9.04 system. I want to wipe the HDD clean and install 9.04. (Upgrading to something newer is not an option; this version is required by a legacy application.) How can I install from this live USB image? I vaguely remember some incantation that I should be able to use in the booted system, but my google-fu is broken at the moment. I'm comfortable with low-level commands, so if you want to recommend a more hard-core strategy, I'm willing to roll with it without requiring a ton of detail...

  Read the article

• Totem crashes immediately after startup in 12.10

  - by Sakib Hasan

  I did a fresh install of Ubuntu 12.10 and did sudo apt-get update && sudo apt-get update. Then I installed ubuntu-restricted-extras, audacious and vlc from Software Center. After that I tried launch Totem Movie player but in terminal following error comes up: (totem:9295): Gdk-ERROR **: The program 'totem' received an X Window System error. This probably reflects a bug in the program. The error was 'BadDrawable (invalid Pixmap or Window parameter)'. (Details: serial 1808 error_code 9 request_code 152 minor_code 9) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the GDK_SYNCHRONIZE environment variable to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) Trace/breakpoint trap (core dumped) I tried purge and again install. But the error remains. What should I do?

  Read the article

• Ternary and Artificial Intelligence

  - by user2957844

  Not much of a programmer myself, however I have been thinking about the future of AI. If a fully functional AI is programmed in a binary environment as is used in current computing, would that create a bit of a black and white personality? As in just yes/no, on/off, 1/0? I will use the Skynet computer from the Terminator series as a bad analogy; it is brought online and comes to the conclusion that humanity should just be destroyed so the problem is resolved, basically its only options were; fire the missiles or not. (The films do not really go into what its moves would be after doing such a thing, but that goes into the realms of AI evolution so does not really fit with this question.) It may also have been badly programmed. Now, the human mind has been akin to a ternary system which allows our "out of the box" thinking along with all the other wonderful things our minds can do. So, would it not be more prudent to create a functional ternary system and program an AI using it so the resulting personality would be able to benefit from the third "maybe" (so to speak) option? I understand that in binary there are ways to get around the whole yes/no etc. way of things, however the basic operations are still just 1's and 0's. Again with using the above bad Skynet analogy; if it could have had that third "maybe" option as part of its core system, it may have decided to not launch due to being able to make sense of the intricacies of human nature and the politics of such a move etc. In effect, my question is; Would an AI benefit more from ternary computing as opposed to binary due to the inclusion of -1, or 2, dependent on the system ("maybe," as I call it)?

  Read the article

• Fun programming or something else?

  - by gion_13

  I've recently heard about android's isUserAGoat method and I didn't know what to think. At first I laughed my brains out, than I was embarrassed for my lack of professionalism and tried to look into it and see if it makes any normal sense. As it turns out it is a joke (as stated here) and it appears that other languages/apis have these sort of easter eggs implemented in their core. While I personally like them and feel they can be a fresh breath sometimes, I think that they also can be both frustrating and confusing (and you begin to ask yourself : "can users be goats?" or "I get it! "goat" is slang for.... wait.."). My question is are there any other examples of these kind of programming jokes and what are their intends? Should they be considered harmless or not (how do programmers feel about it) ? Do they reach their goal (if any other than to laugh) ? Where do you draw a line between a good joke and a disaster? (what if the method was called isUserStupid?)

  Read the article

• LiveCD not booting/can't install Ubuntu 11.04

  - by user20318

  So, i got a new laptop somedays ago and as usualy, i went formated it to install Ubuntu. Download 11.04 and burned it on my pendrive using my old laptop (running 11.04). When i tryed to boot from the LiveUSB on my new laptop, it just showed me some weird graphics and if i select any option (can't see what im selecting), it gives me a black screen and that is all. Then i tryed to boot with this LiveUSB on my old laptop, and it worked just fine ._. Burned a CD with Ubuntu 11.04 (64bits) and the problem continue. Then i tought it could be my CD Driver, since the laptop is new and all... burned a Windows 7 64 bits DVD and it worked just fine. Also, if i check the CD/Pendrive inside Windows Seven, all the files there are ok. Anyone have any idea of what can be? I found lots of questions about this, but none of them had the weird menus i'm getting ._. oohh... i also get a "prefix is not set" before the weird menu appears :S My sis specs: Intel Core i5 2400 Intel HD 3000 4gb DDR3 If anyone can help, i will be really greatfull ._.

  Read the article

• Solutions for iOS collaborative sync (iCloud CoreData, CouchDB)?

  - by mluisbrown

  I'm developing an iOS app where one of the features will be allowing users to share and collaborate on data (e.g. lists). From everything I've read and based on the way that iCloud CoreData sync works I assume that it would not be a good fit for the following reasons, but I wanted to make sure I wasn't missing anything, as I'd prefer not to use a 3rd party syncing solution if at all possible: iCloud sync of any kind (CoreData, Document or Key / Value pairs) can only ever be between devices that use the same iCloud account, so it's designed for a single user syncing data over multiple devices. Any kind of collaborative sync (several people editing the same document / list) simultaneously would be limited to everyone have the same iCloud account. Cases of people sharing the same iCloud account is usually limited to, for example, husband and wife or similar close relationships for a small number of people. iCloud Core Data sync is for ensuring that each sync'd device has the same data. It doesn't seem to allow syncing just a subset of the data, so scenarios in which each user has their own documents and is only sharing / collaborating on a subset of them are not supported. And I'm not even mentioning the well document problems with iCloud CoreData syncing which may or may not have been resolved with iOS 7. Given the above, it would seem that CouchDB (with TouchDB) would be a better option, as it seems to support everything I need. What other options are there that people can recommend?

  Read the article

• What patterns book for iOS development contains this specific information? [closed]

  - by Brett Ryan

  I've read several books on iOS development and Objective-C, however what a lot of them teach is how to work with interfaces and all contain the model inside the view controller, i.e. a UITableViewController based view will simply have an NSArray as it's model. I'm interested in what the best practices are for designing the structure of an application. Specifically I'm interested in best practices for the following: How to separate a model from the view controller. I think I know how to do this by simply replacing the NSArray style example with a specific model object, however what I do not know how to do is alert the view when the model changes. For example in .NET I would solve this by conforming to INotifyPropertyChanged and databinding, and similarly with Java I would use PropertyChangeListener. How to create a service model for my domain objects. For example I want to learn the best way to create a service for a hypothetical Widget object to manage an internal DB and also services for communicating with remote endpoints. I need to learn the best ways to do this in a way that interface components can subscribe to events such as widgetUpdated. These services should be singleton classes and some how dependency injected into model/controller objects. Books I've read so far are: Programming in Objective-C (4th Edition) Beginning iOS 5 Development: Exploring the iOS SDK The iOS 5 Developer's Cookbook: Expanded Electronic Edition: Essentials and Advanced Recipes for iOS Programmers Learn Objective-C on the Mac: For OS X and iOS I've also purchased the following updated books but not yet read them. The Core iOS 6 Developer's Cookbook (4th edition Programming in Objective-C (5th Edition) I come from a Java and C# background with 15 years experience, I understand that many of the ways I would do things in these languages may not fit to the ObjC way of developing applications. Would someone be able to provide me with the book on this topic containing this specific subject matter?

  Read the article

• JavaOne 2012 in Review

  - by Janice J. Heiss

  Noted freelance writer Steve Meloan has a new article up on otn/java, titled, “JavaOne 2012 Review: Make the Future Java” in which he summarizes the happenings at JavaOne 2012. Along the way, he reminds us that if the future turns out to be anything like the past, Java will do fine: The repeated theme for this year's conference was ‘Make the Future Java,’ and according to recent stats, the groundwork is already firmly in place:    There are 9 million Java developers worldwide.    Three billion devices run Java.    Five billion Java Cards are in use.    One hundred percent of Blu-ray Disc players ship with Java.    Ninety-seven percent of enterprise desktops run Java.    Eighty-nine percent of PC desktops run Java.This year's content curriculum program was organized under seven technical tracks:    Core Java Platform    Development Tools and Techniques    Emerging Languages on the JVM    Enterprise Service Architectures and the Cloud    Java EE Web Profile and Platform Technologies    Java ME, Java Card, Embedded, and Devices    JavaFX and Rich User Experiences”Meloan artfully reminds us of how JavaOne makes learning fun. Have a look at the article here.

  Read the article

• MVC design patterns

  - by insane-36

  I have an application and it does not use a very good structure. However it seems to me that I have tried to stick to mvc design pattern but a senior engineer claims that I have no design patterns and code are mesh. How I have structured the code : I have couple of nsmanagedobject model classes which represents model in my case and a reskit library which encapsulates the nsurlconnection and url request. I fetch the request from the view controller itself and then when the request get completed I create predicate and then populate it in tableview. Wherever I need custom view either I create it in nib or create in a custom subclass of UIView. I have use delegation pattern and notification to communication to view controller, views and block callback with restkit. But, the senior engineer is very new to ios. He has been doing it for 2 months now but he is a good java programmer. So, what is mvc pattern ? Is core data model not working as a model objects, view controller as controller and views. I dont seem to find any other places or any other cases to create my own model object since the most of the models are used as NSManagedObject subclass.

  Read the article

• Is text-only mode a saving or a problem for battery savings?

  - by Robottinosino

  A friend is flying to the US from Europe and asked me a very thought-provoking question, which I am not remotely able to answer with substance so I am asking it here: How to absolutely maximise battery life on an Ubuntu (laptop) install? do not rush to mark this as duplicate, there is an important point here: does -GNOME- help or worsen battery life? Let me provide some context: The only task he needs to perform is: edit text files in Vim. He is unsure whether running GNOME will drain his battery life more or actually save him some battery life given the smarts of GNOME's power management features like "switch this peripheral to -power save- after X minutes..." (GNOME might just be a configuration front-end for settings that are governed by command-line utils for all I know?) He could perfectly well boot the system in text-only mode and use the automatic 6 virtual consoles for his needs, if that's a saving at all over running tmux (I think so because of all the smart buffering/history/etc the latter does by default?) Exactly how would you advise him to run his laptop during his flight? What I told him already: power off WiFi in the BIOS, not from the "GUI" power off Bluetooth switch off the courtesy light and use low monitor brightness play music off of his phone, not mp3blaster do not use his tiny portable mouse (and do not attach any other USB gimmicks like "screen light", etc) stop development services he will not be using, especially apache2, tomcat, dovecot, postgresql, etc. Potentially: - switch off his cron jobs? (he does an rsync + tar + 7za of his "work in progress" every so often) I think the above is standard stuff one could get off StackExchange, and with many duplicates... the core of this question is, I think: __ will running Ubuntu in text-only mode be a saving in terms of battery life or a problem? why? (provide some technical arguments) __ I think it will be a saving but I am also scared about "other things" detecting and enabling advanced chipset power management features only when some services are started.. and fear these "services" may be off in text-only mode?

  Read the article

• How do I find actors in an area on a poly-precise basis?

  - by Almo

  Ok, I've been asking various questions and getting some good answers, but I think I need to rethink my method, so I'll describe the problem. I have a player who has a big blue box in front of him. This box shows which KActors will be pushed when he pulls the trigger: Currently, the blue box spawns a descendant of Actor which checks collision to see which KActors are touching it: foreach Owner.TouchingActors(class'DynamicSMActor', DynamicActorItt) { // do stuff } The problem is, if you check for touching between Actors and KActors, it looks like it does a plain axis-aligned bounding-box collision. The power will push the box on the lower right, when it's clear it's not touching the blue box. How should I do this properly? I just need a way to find out which KActors are touching that area, on a poly-by-poly level. These collisions are only done with rectangular boxes and simple sphere collision; we are aware of the potential for performance issues with complex objects and poly-collision. I've tried making the collision checker a KActor, but it doesn't report any TouchingActors. This issue is causing us trouble in a lot of other places as well. So solving this problem is a core issue in our game.

  Read the article

• i18n and L10n (1)

  - by Aaron Li

  Internationalization (i18n) is a way of designing and developing a software product to function in multiple locales. This process involves identifying the locales that must be supported, designing features which support those locales, and writing code that functions equally well in any of the supported locales. Localization (L10n) is a process of modifying or adapting a software product to fit the requirements of a particular locale. This process includes (but may not be limited to) translating the user interface, documentation and packaging, changing dialog box geometries, customizing features (if necessary), and testing the translated product to ensure that it still works (at least as well as the original). i18n is a pre-requisite for L10n. Resource is 1. any part of a program which can appear to the user or be changed or configured by the user. 2. any piece of the program's data, as opposed to its code. Core product is the language independent portion of a software product (as distinct from any particular localized version of that product - including the English language version). Sometimes, however, this term is used to refer to the English product as opposed to other localizations.   Useful links http://www.mozilla.org/docs/refList/i18n/ http://www.w3.org/International/ http://hub.opensolaris.org/bin/view/Community+Group+int_localization/

  Read the article

• PC always boots into Command Line

  - by Neptun1337

  My current Problem is, that when I try to install Ubuntu 12.04 Desktop, neither unity nor gnome are installed. During the installation, I am prompted with the message that only the core is installed, and which additional packages I would like to have installed. When I select ubuntu-desktop, the installer grabs some packages and installs them, but after completing the installation and booting into my Ubuntu, i dont get any GUI, but instead I have the command line interface. When I try to start a new Unity session, i get an error saying that Unity is not installed, so I tried to install it. However this changes nothing, my PC still boots into the Command Line. Are there any solutions to my problem? Any help would be greatly appreciated. Thanks in advance. EDIT: I tried to fix it with the following commands: $ sudo apt-get install ubuntu-desktop $ sudo apt-get install gdm $ sudo /etc/init.d/gdm start When I try to boot, I get the Ubuntu splash screen, but then the screen mainly shows white squares, with a few black ones at the top.

  Read the article

• What do I do for dependencies installing wine1.7 on 14.04

  - by user285207

  user@chrubuntu:~$ sudo apt-get install wine1.7 [sudo] password for user: user Sorry, try again. [sudo] password for user: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wine1.7 : Depends: wine1.7-i386 (= 1:1.7.19-0ubuntu2~trusty2) but it is not installable Recommends: gnome-exe-thumbnailer but it is not going to be installed or kde-runtime but it is not going to be installed Recommends: ttf-mscorefonts-installer but it is not going to be installed Recommends: fonts-horai-umefont but it is not going to be installed Recommends: fonts-unfonts-core but it is not going to be installed Recommends: ttf-wqy-microhei Recommends: winetricks but it is not going to be installed E: Unable to correct problems, you have held broken packages. user@chrubuntu:~$ Trying to install wine1.7 on Ubuntu 14.04 64 bit, and i'm not sure what this means, help is greatly appreciated. I already ran sudo apt-get update and get this: Reading package lists... Done W: Duplicate sources.list entry http://dl.google.com/linux/chrome/deb/ stable/main amd64 Packages (/var/lib/apt/lists/dl.google.com_linux_chrome_deb_dists_stable_main_binary-amd64_Packages) W: You may want to run apt-get update to correct these problems So I run apt-get update and: E: Could not open lock file /var/lib/apt/lists/lock - open (13: Permission denied) E: Unable to lock directory /var/lib/apt/lists/ E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied) E: Unable to lock the administration directory (/var/lib/dpkg/), are you root? This is all very stressing because I have been trying to get Wine for the past week and had to reinstall and IT STILL WON'T WORK.

  Read the article

• Ubuntu 11.04 64bits Keeps Randomly Freezing

  - by user971602

  This has been a real headache for me since the number of freezes has increase from twice a week to about 1 or twice a day. The system just halts and nothing can be done but hitting the restart button. At the beginning I thought it was related to Flash since I was getting random freezes when playing full screen flash videos online. I also thought it could be the wireless pci card. But the system has freezed using browsing around GNOME. The truth is, the freezes are really random and strange. I checked this thread Ubuntu keeps randomly freezing and try to ssh my computer using another one, but I could not ssh since it was really totally frozen. NumLock or CapsLock wasn't responding or blinking. Since I could not ssh I, also ignored this article https://wiki.ubuntu.com/X/Troubleshooting/Freeze According to my wife, the system has also halted under Win7 Pro 64bit but with less frequency. Here is my system configuration Intel Core i7 2600k ASRock Z68 Extreme3 gen3 Motherboard Crucial M4 128GB CT128M4SSD2 SSD WD Caviar Green WD10EADS 1TB SATA II G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR2 OCZ ModXStream 600W Power Supply Rosewill RNX-N300X PCI Wireless Adapter No external Graphics Card I remove the Wireless card and used Ethernet to see if the problem was the that, but I got a freeze after doing that. I also ran memtest86 and everything was ok. The only other thing I might suspect of is the SSD. I will try to clone the SSD to a HDD to see if that solve the problem. At this point I am stuck with the freezes. Do anyone have a clue of why this is happening and how can i solve this?

  Read the article

• Site experiencing low traffic volume between 8AM and 4PM BST

  - by BizNuge

  There may be no definitive answer to this question but I thought peer review of the problem might stimulate some ideas on the topic. We have a boutique sales site that is experiencing low volumes of traffic (both UK and international) between 8AM and 4PM BST. This seems sort of strange since our target audience for the site is UK based, and this would seem to be when people are awake and online. We are in contact with another boutique site in the same sector who don't experience this issue, so it seems kinda strange. Later on in the day we are getting traffic from the UK, as well as a fair amount of international traffic, so I'm at a loss to figure this one out. The site is fairly well optimised including:- sitemap.xml Proper caching policies across the board google merchant dublin core microdata html5 pretty urls meta and content are reviewed as an ongoing concern we have decent sitelinks for direct queries thru google on the site name a decent amount of inbound links FB, Twitter, Google +1 Google maps listing [verified] site has been selling for ~4 months and is getting ~250 users per day. So I'm not entirely sure how to explain the mid day dip in our figures.... Any ideas at all would be useful. Cheers all!

  Read the article

• after upgrade from 10.04 to 12.04 cannot boot with linux 3.2.0-24-generic-pae

  - by Ricardo

  After upgrade from 10.04 to 12.04, I cannot boot with linux 3.2.0-24-generic-pae: process gets frozen in a xubuntu initialization screen (I had qimo installed). If I try the recovery mode (with the same Linux version), booting freezes after this message: Begin: Mounting root file system. If in grub menu I choose Previous Linux versions, I can boot using Linux 2.6.32-41-generic-pae. But once logged in, some things don't seem to work (apt-get update fails, update manager fails, HID menu does not provide suggestions...) (to be honest, I have no idea whether this is part of the bigger issue) Reading in Ask Ubuntu through apparently similar problems, I decided to follow some advices: got boot-repair and run it. The problem remains & I got this report. I also run as root in terminal $ sudo update-initramfs -u and this is what I got: update-initramfs: Generating /boot/initrd.img-3.2.0-24-generic-pae cryptsetup: WARNING: failed to detect canonical device of /dev/sda1 cryptsetup: WARNING: could not determine root device from /etc/fstab /tmp/mkinitramfs_EIDlHy/scripts/classmate-bottom/45xconfig: 9: .: Can't open /scripts/casper-functions What else? My pc is Intel® Core™ i7 CPU 870 @ 2.93GHz × 8, graphs is GeForce 8400 GS/PCIe/SSE2, memory is 7,8 GiB. I have two questions: Is this a bug in the newest kernel I should report? Is there anything I can do appart from a fresh install?

  Read the article

• Mouse pointer size inconsistent

  - by charon00

  Since installing Ubuntu 12.04, I've been having a problem with the mouse pointer size. On the desktop, it is quite a bit larger than it should be (24), though the different cursors (editing text, hyperlink hand, etc) are correct. The size changes to the correct size when the pointer is over some application windows (GVim, Netbeans, Firefox), but then changes back once it is moved out of the window. There was a similar question here, but the Xdefaults solution did not work for me, and I didn't want to try the one requiring editing the icon image. In addition, I've tried changing the cursor theme using sudo update-alternatives --config x-cursor-theme as well as using the dconf-editor, but though I can change the theme, the size issue remains. In case it's relevant, I'm running on a dual-screen setup with monitor sizes of 2560x1600 and 1920x1080, using the NVidia video driver. Is there another way to control pointer size, or a setting that might be messing it up? EDIT: These are the values/options I have for update-alternatives and in dconf-editor. I'm now wondering if Netbeans and Firefox are making the mouse pointer smaller than it should be, but I'm not sure how big 24 should be... update-alternatives: Selection Path Priority Status ------------------------------------------------------------ 0 /usr/share/icons/DMZ-White/cursor.theme 90 auto mode 1 /etc/X11/cursors/core.theme 30 manual mode 2 /etc/X11/cursors/handhelds.theme 20 manual mode 3 /etc/X11/cursors/redglass.theme 20 manual mode 4 /etc/X11/cursors/whiteglass.theme 20 manual mode * 5 /usr/share/icons/DMZ-Black/cursor.theme 30 manual mode 6 /usr/share/icons/DMZ-White/cursor.theme 90 manual mode dconf-editor: I can't post the image since I'm a new user but the cursor-size is set to 24 and the cursor-theme is DMZ-Black.

  Read the article

• How do I configure an Intel HD Graphics 4000?

  - by derabbink

  First off, please note that last night I already posted this question to a launchpad mailing list, so this could be considered a cross post. However, I think this is a better place to ask the same question The question: How can I configure my Ubuntu 12.04, with upgraded kernel (3.6), to use the Intel HD Graphics 4000 adapter? (Intel HD 4000 is the standard of 3rd gen Intel Core i7 (Ivy Bridge) graphics adapter) Some output: $ glxinfo name of display: :0 X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 154 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 $ cat /etc/X11/xorg.conf this is probably the farthest from what it should be Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Module" Load "glx" EndSection $ lspci I only listed the line I think are relevant. If you want more info in order to help me, please comment :) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 16:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 16:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Turks HDMI Audio [Radeon HD 6000 Series]

  Read the article

• after BIOS splash, will not boot -- asks me to select an OS, but it just reboots

  - by user92040

  I'm running Linux Mint 13 MATE 64-bit. Everything has been working for several weeks. Yesterday, when I tried to boot up my computer, after the BIOS screen flashes I reach a screen with a black background that reads at the top: GNU GRUB version1.99-21ubuntu3.4 Then there is a box in which I can select from the following lines: Linux Mint 13 MATE 64-bit, 3.2.0-31-generic (/dev/sdb2) Linux Mint 13 MATE 64-bit, 3.2.0-31-generic (/dev/sdb2) -- recovery mode Previous Linux versions Memory test (memtest86+) Memory test (memtest86+, serial console 115200) At the bottom it reads: Use the ? and ? keys to select which entry is highlighed. Press enter to boot the selected OS, 'e' to edit the commands before booting or 'c' for a command-line. I have no idea why it started doing this and, worse, I have no idea how to get out of here. No matter which option I select, I can't get it to boot the OS. If I select either of the first two, it reboots to splash the BIOS and then I'm right back where I started. If I choose "Previous Linux versions" I get essentially the same screen with only two choices (which are the same as the first two choices listed above, Linux 13 MATE and the recovery mode). Again, choosing either one of those results in a reboot. If I try to run either of the memtest options, it reads: error: unknown command 'linux16', Press any key to continue... Then it brings me back to the same screen Can anyone help me please? Intel Core i5-2500 ASUS P8Z68-V LX Intel Motherboard G. Skill Ripjaws series F3-12800CL9D-8GBRL (4GB x2) Plextor 128GB M5S Series SSD

  Read the article

• BumbleBee / getting Nvidia 310.19 Drivers to Work | 12.10

  - by Charles Mynard

  Asus U31JG - A1 Laptop: -Intel Core i3 -Nvidia 415m / Intel HD Graphics ( Optimus Technology ) Hello, I have been trying for about 3 weeks now to get any kind of Nvidia driver to work, and now am determined to get the 310.19 driver to work. I have tried numerous times of which either nothing happened or my interface ( menu bars, the top and left bar on desktop, and the ability to close a window) would disappear. Apparently I'm not making the connection on how to get these to install properly. I have tried numerous other posts and websites and attempted "bumblebee" to no avail. I am wondering if anyone can write a step by step guide of commands that I need to run in terminal to get this to work. I've had to reinstall 12.10, so if you could walk me through the process of getting the drivers downloaded and installed, I would greatly appreciate it. I barely know what I'm doing, and this is quite a turn off for someone new to Ubuntu, I really want to enjoy it but this is preventing me from committing. Thank you in advance, and I apologize for being so flustered / helpless with this but I have ran out of patience with this.

  Read the article

• Drive reporting incorrect free space

  - by Oli

  So I swapped my shiny SATA SSD for an even shinier PCI-E SSD. I run my core OS on the SSD because it's silly-fast. I did this on my old SSD so I created a new EXT4 partition and then just dded the data across (sorry I don't know the exact command I ran anymore) and after reinstalling grub, I booted onto the PCI-E SSD. At first glance everything had worked perfectly and things were running faster than ever. But then I noticed the free disk space on the new, larger drive: it was almost exactly the same as it was on the other disk... A disk that was half its size. So it looks as if I've copied the files across incorrectly and it's copied some of the filesystem metadata along with it. Tools like du and Disk Usage Analyzer come back with the correct figures. Things that look at the partition (and not the files) seem to think the drive is 120GB I've been using this drive for a week now so it's way out of sync with the old SSD so dumping the data and starting again isn't a job that fills me with joy but two questions: Is there a way to fix my filesystem so it knows what it's really on about? fsck e2fsck and badblocks all seem to be able to scan it without finding a problem with it. If I do plug my old SSD back in, copy the data off my PCI-E on to it and then copy it back onto a fresh filesystem (eg juggle the data around), what's the best way of doing that? I obviously want to keep all the permissions and softlinks where they are.

  Read the article

• Does lesser wide screen fit better than a large one?

  - by artaxerxe

  About 3 weeks ago I changed my job. At the former workplace, I had 2 monitors for doing programming (GUI and core programming). Here, at the place where I am, the administrators gave me a laptop (15.6 inch) and wanted to provide me a wider screen additional to the laptop's one. I said that for now I want to test as it is, with the laptop's screen. I also want to mention, that in the current job I'm not targeted for GUI development. My feeling until now (but it can be just a feeling) is that working on this single not so wide screen, I'm not so weary after a full day work as I was with 2 wide monitors. Does anyone have any recommendations on this problem? Does lesser screens (in my case exclusively 15.6 inch vs 20 inch screens) affect your eyes? If anyone have any knowledge about, please feel free to say what's your opinion. P.S. I think that's a good site for this kind of question. Otherwise, please guide me on what site from StackExchange should I put it. Thanks.

  Read the article

• Unable to start after 13.04 > 13.10 udate

  - by romainl

  At the end of the update process, clicking on the Restart button had no visible effect whatsoever. After waiting 5 to 10 minutes, I decided to reboot the computer manually. Since then, I rebooted a good dozen times (not with the hope that it would work but with the hope of reading the messages) with the same non-result and the same symptoms: I get the ASCII text-on-purple Ubuntu 13.10 . . . . splash screen with these messages: * Restoring resolver state... [OK] * Starting crash report submission daemon [OK] * Starting CUPS printing spooler/server [OK] Everything disappears. The whole process hangs at a purple screen with the mouse cursor right in the middle. At this point, I'm unable to use the mouse and the keyboard. Booting from a 12.04 CD works perfectly, Disk Utility says that all my disks are OK and I can mount my main partition without problems. Something obviously went wrong at the end of the upgrade but I have no idea what. I'd appreciate any pointer. This is the kind of moment where you really think "Next time, I'll separate my /home partition for sure". My machine is an aging but working Dell Inspiron 530 with an Intel Core Duo E2160 processor, 2 GHz of RAM and an ATI Radeon HD3650 video card. Thanks.

  Read the article

• Is this a good implementation of a loop in Prolog?

  - by Carles Araguz

  First of all, let me tell you that this happens to be the first time I ask something here, so if it's not the right place to do so, please forgive me. I'm developing a rather complex software that has a Prolog core implementing a FSM. Since I don't want it to stop (ever), I'm trying to write a good loop-like predicate that would work using Prolog's recursion. After a few unsuccessful tries (mainly because of stack problems) I ended up having something similar to this: /* Finite State Transition Network */ transition(st0,evnt0,st1). transition(st1,evnt1,st2). transition(st2,evnt2,st0). fsm_state(state(st0),system(Energy,ActivePayloads),[]) :- /* ... */ transition(st0,evnt0,NextState), !, fsm_state(state(NextState),system(Energy,ActivePayloads),[]). fsm_state(state(st1),system(Energy,ActivePayloads),[]) :- /* ... */ transition(st1,evnt1,NextState), !, fsm_state(state(NextState),system(Energy,ActivePayloads),[0,1,2]). fsm_state(state(st2),system(Energy,ActivePayloads),[P|Params]) :- /* ... */ transition(st2,evnt2,NextState), !, fsm_state(state(NextState),system(Energy,ActivePayloads),[]). start :- Sys = system(10,[]), fsm_state(state(s0),Sys,[]). Is this a good approach?

  Read the article

< Previous Page | 357 358 359 360 361 362 363 364 365 366 367 368  | Next Page >