Search Results

Search found 12844 results on 514 pages for 'manual testing'.

Page 362/514 | < Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >

• How to configure Transparent IP Address Sharing (TAS) on a Mediatrix 4102 with DGW 2.0 firmware?

  - by Pascal Bourque

  I am making the switch to VoIP. I chose voip.ms as my service provider and Mediatrix 4102 as my ATA. One reason why I chose the Mediatrix over other popular consumer ATAs is that it's supposed to be easy to place it in front of the router, so it can give priority to its own upstream traffic over the home network's upstream traffic. This is supposed to work transparently, with the ATA and router sharing the same public IP address (the one obtained from the modem). They call this feaure Transparent IP Address Sharing, or TAS. Their promotional brochure describes it like this: The Mediatrix 4102 also uses its innovative TAS (Transparent IP Address Sharing) technology and an embedded PPPoE client to allow the PC (or router) connected to the second Ethernet port to have the same public IP address, eliminating the need for private IP addresses or address translations. I am interested by this feature because my router, an Apple Time Capsule, doesn't support QoS and cannot give priority to the voice packets if the ATA is behind the router. However, after hours of searching the web, reading the documentation, and good ol' trial and error, I haven't been able to configure the Mediatrix to run in this mode. Then I found a version of the manual that looks like it was for a previous version of the firmware (SIP), where there is an entire section dedicated to configuring TAS (starting at page 209). But my Mediatrix comes with the DGW 2.0 firmware, whose documentation does not mention TAS at all. So I tried to follow the TAS setup instructions from the SIP documentation and apply them to my DGW firmware, using the Variable Mapping Between SIP v5.0 and DGW v2.0 document as a reference, but no success. Some required SIP variables don't have an equivalent in DGW. So it looks like the DGW firmware does not support TAS at all, or if it does they are not doing anything to help us set it up. So right now, the Mediatrix is behind the router and VoIP works perfectly except when my upstream bandwidth is saturated. My questions are: Is downgrading to SIP firmware the only way to have my Mediatrix 4102 run in TAS mode? If not, anybody knows how to setup TAS on the DGW firmware? Is TAS mode the only way to give priority to the voice packets if I want to keep my current router (Apple Time Capsule)? Thanks!

  Read the article

• Why does the ID of Google's OpenID implementation change?

  - by Andrea

  I'm trying to implement OpenId login for a web application. Whenever new user who logs in via OpenId I create a new user on the sustem, and among the data I store their openid URL, so that next time they login with that user. I'm testing this with my Gmail OpenID, and the problem is that everytime I do this, Google sends a different openid URL, that is, https://www.google.com/accounts/o8/id?id=SomethingThatChangesFromTimeToTime Of course I'm then not able to tell wheter this is or not a new user. I'm a bit puzzled: shouldn't the openid identifier always remain the same?

  Read the article

• Is this a correct way to host a WCF service?

  - by mafutrct

  For some testing code, I'd like to be able to host a WCF service in only a few lines. I figured I'd write a simple hosting class: public class WcfHost : IDisposable where Implementation : class where Contract : class { public readonly string Address = "net.tcp://localhost:8000/"; private ServiceHost _Host; public WcfHost () { _Host = new ServiceHost (typeof (Implementation)); var binding = new NetTcpBinding (); var address = new Uri (Address); _Host.AddServiceEndpoint ( typeof (Contract), binding, address); _Host.Open (); } public void Dispose () { ((IDisposable) _Host).Dispose (); } } That can be used like this: using (var host = new WcfHost<ImplementationClass, ContractClass> ()) { Is there anything wrong with this approach? Is there a flaw in the code (esp. about the disposing)?

  Read the article

• Deploying Excel 2003 VSTO Workbook using Sharepoint for versioning control

  - by KClough

  I have an excel 2003 vsto workbook that I would like to make available via sharepoint for version control. Ideally it could be checked in/out by non-developers for tweaking excel equations, and I would be able to deploy the compiled dlls somewhere else when I need to update the managed VSTO code. I understand I may need to use some clickonce functionality as well so when a user first views the sheet they get all the necessary full-trust permissioning. Also, it is my understanding that for a user to use the vsto functionality in an excel 2003 vsto workbook, they must have the compiled dll in thier GAC, is this true? When testing I get trust exceptions otherwise.

  Read the article

• Problem using System.Xml in unit test in MonoDevelop (MonoTouch)

  - by hambonious

  I'm new to the MonoDevelop and MonoTouch environment so hopefully I'm just missing something easy here. When I have a unit test that requires the System.Xml or System.Xml.Linq namespaces, I get the following error when I run the test: System.IO.FileNotFoundException : Could not load file or assembly 'System.Xml.Linq, Version=2.0.5.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. Things I've verified: I have the proper usings in the test. The project builds with no problems. Using these namespaces work fine when I run the app in the emulator. I've written a very simple unit test to prove that unit testing works at all (and it does). I'm a test driven kinda guy so I can't wait to get this working so I can progress with my app. Thanks in advance.

  Read the article

• How do i deploy UAT and Development SharePoint solution on the same server ?

  - by Nikhil Vaghela

  I am working on a SharePoint 2010 Server and i have following items in my SharePoint solution Couple of web parts State Machine Work flow (which will be integrated to an Infopath form library) Infopath task edit forms Lets say this solutions is deployed to http://[SharePoint201Server]:[PortNumber-x]/ This is the only server i have (No extra server for UAT), and what ever has been done so far needs to be given for user acceptance testing (UAT). I may create one more site at http://[SharePoint201Server]:[PortNumber-y]/ for it. My problme is that how do i maintain two copies of my source code ? I will have to continue development on the same set of source code for next UAT release. I simply can not create simple copies of the source code as it will have same Assembly name and feature id, etc..As if i do so, any changes on under Development source code would affect UAT assemblies. One thing i can do is to create seperate projects for UAT and Development with different Features and Assembly names, but is not that too much of an unneccesory work ? What can be the best approach in such situation ?

  Read the article

• HTTP Error 403.1 - Permissions are fixed, what else is wrong?

  - by baron

  I have developed a HTTP Handler Web Service, and have had it successfully deployed, through testing on other environments i've ran into another problem. This is the error message I receive: You have attempted to execute a CGI, ISAPI, or other executable program from a directory that does not allow programs to be executed. HTTP Error 403.1 - Forbidden: Execute access is denied. Internet Information Services (IIS) So it is obvious what needs to be fixed, so: 1) Start Internet Information Services (IIS) Manager. 2) Right-click the Web site that contains the SharePoint Web site that you created, and then click Properties. 3) Click the Home Directory tab. 4) Under Application settings, click either Scripts only in the Execute permissions list or Scripts and Executables in the Execute permissions list (as appropriate to your situation). Click OK. 5) Quit IIS Manager. But I'm still getting the same error. So what else could be wrong?

  Read the article

• Excluding files from being deployed with Capistrano while still under version control with Git

  - by Jimmy Cuadra

  I want to start testing the JavaScript in my Rails apps with qUnit and I'm wondering how to keep the test JavaScript and test runner HTML page under version control (I'm using Git, of course) but keep them off the production server when I deploy the app with Capistrano. My first thought is to let Capistrano send all the code over as usual including the test files, and write a task to delete them at the end of the deployment process. This seems like sort of a hack, though. Is there a cleaner way to tell Capistrano to ignore certain parts of the repository when deploying?

  Read the article

• HABTM and belongsTo at the same join, cakePhp

  - by Cynthia

  Hello everyone. I have a model Fix with a relationship HABTM Device model. Device model has a belongsTo to Device_type model, like this, for only getting the device type name: var $belongsTo = array('Device_type'=>array('fields'=>'name')); So, I need every Fix, its devices and its Device_types. When I make a Fix->find('all', array('recursive' => 2)) I expect to get every Device related to Fix (this works ok) and ALSO for every device, its Device_type.name (which is not working). This is what I get instead for every Device in the result (an empty array): ["Device_type"]=> array(0) { } Besides this, when I make this query for testing: Fix->Device->find('all'), it returns the current Device_type.names for every device related to fixes, which means models are related propertly. Any help? Thanks.

  Read the article

• How do you share your git repository with other developers?

  - by semi

  I have a central git repository that everyone pushes to for testing and integration, but it only is pushed to when features are 'ready'. While in the middle of a big task, developers frequently have many commits that stay on their harddrives. Sometimes in the middle of these projects I'd like to either see what another developer is doing, or show him how I've done something. I'd like to be able to tell another developer to just "pull my working copy" The only way I can think of is having everyone run ssh on their development machines and adding accounts or ssh keys for everyone, but this is a huge privacy and permissions nightmare, and seems like a lot of work to maintain. Should we just be pushing to that central repository in these cases? Should we be pushing after every local commit?

  Read the article

• iOS 5 fixed positioning and virtual keyboard

  - by jeffc

  I have a mobile website which has a div pinned to the bottom of the screen via position:fixed. All works fine in iOS 5 (I'm testing on an iPod Touch) until I'm on a page with a form. When I tap into an input field and the virtual keyboard appears, suddenly the fixed position of my div is lost. The div now scrolls with the page as long as the keyboard is visible. Once I click Done to close the keyboard, the div reverts to its position at the bottom of the screen and obeys the position:fixed rule. Has anyone else experienced this sort of behavior? Is this expected? Thanks.

  Read the article

• Windows IIS test server setup

  - by chopps

  hello everyone, I picked up a new server to do some testing and need of a little help in setting up my environment at home. Here is what I would like to do: The test server will be used to test new code and configurations for a SaaS product. I would like from my laptop to enter www.acme.com and have it hit the server. The server is connected to a wireless router. I have windows server 2008 with IIS running on an an IP of 192.168.1.4. What is the best way to set this up? I want to hit the test server for www.acme.com and not go out to the internet. Do i need to mess with the LMHosts file? Thanks for the help. Im sure its easy but have never done this before.

  Read the article

• Opening a file from a pack URI in WPF

  - by cptmorgan

  Hi All, I am looking to open a .csv file from the application pack to do some unit testing. So what I would really love is some analog to File.ReadAllText(string path) which is instead X.ReadAllText(Uri uri). I haven't as yet been able to find this. Does anyone know if it is possible to read text / bytes (don't mind which) from a file in the pack without compiling this file to disk first? Oh and btw, File.ReadAllText(@"pack://application:,,,/SpreadSheetEngine/Tests/Example.csv") didn't work for me.. Thanks in advance.. Gav

  Read the article

• iphone memory leaks and malloc?

  - by Brodie4598

  Okay so im finally to the point where I am testing my iPad App on an actual iPad... One thing that my app does is display a large (2mb) image in a scroll view. This is causing the iPad to get memory warnings. I run the app in the instruments to check for the leak. When I load the image, a leak is detected and i see the following in the allocations: ALl Allocations: 83.9 MB Malloc 48.55 MB: 48.55 MB Malloc 34.63 MB: 34.63 MB What im trying to understand is how to plug the leak obviously, but also why a 2MB image is causing a malloc of 20x that size I am very new to programming in obj-c so im sure this is an obvious thing, but I just cant figure it out. Here is the code:

  Read the article

• Continuous Integration with Oracle Products

  - by Lee Gathercole

  Hi, I'm currently working on a Datawarehouse project using an Oracle Database, Oracle Data Integrator, Oracle Warehouse Builder and some Jython thrown in for good measure. All of which is held within TFS. My background is .net and prior to this project was seeing a lot of promise in CI. I'm not suggesting that the testing element of CI is feasible in this instance, but I would like to implement a stable deployment strategy. What I'm trying to understand is whether or not I can build some NANT scripts that will allow me to deploy ODI\OWB\Oracle DB code to any given environment at any point. Has anyone tried this before? Are there more appropriate tools out there that lends themselves better to this sort of toolset? Am I just a crazy horse to be evening contemplating this? Any view would be greatly appreciated. Thanks Lee

  Read the article

• Make errors when compiling HPL-2.1 on MOSIX-clustered Debian server

  - by tlake

  I'm trying to compile HPL 2.1 on a MOSIX-clustered Debian server, but the make process terminates with errors as seen below. Included are my makefile and two versions of output: one from a standard execution, and one from an execution run with the debug flag. Any help and guidance would be very much appreciated! The makefile: # ---------------------------------------------------------------------- # - shell -------------------------------------------------------------- # ---------------------------------------------------------------------- # SHELL = /bin/bash # CD = cd CP = cp LN_S = ln -s MKDIR = mkdir RM = /bin/rm -f TOUCH = touch # # ---------------------------------------------------------------------- # - Platform identifier ------------------------------------------------ # ---------------------------------------------------------------------- # ARCH = Linux_PII_CBLAS # # ---------------------------------------------------------------------- # - HPL Directory Structure / HPL library ------------------------------ # ---------------------------------------------------------------------- # TOPdir = $(HOME)/hpl-2.1 INCdir = $(TOPdir)/include BINdir = $(TOPdir)/bin/$(ARCH) LIBdir = $(TOPdir)/lib/$(ARCH) # HPLlib = $(LIBdir)/libhpl.a # # ---------------------------------------------------------------------- # - Message Passing library (MPI) -------------------------------------- # ---------------------------------------------------------------------- # MPinc tells the C compiler where to find the Message Passing library # header files, MPlib is defined to be the name of the library to be # used. The variable MPdir is only used for defining MPinc and MPlib. # MPdir = /usr/local MPinc = -I$(MPdir)/include MPlib = $(MPdir)/lib/libmpi.so # # ---------------------------------------------------------------------- # - Linear Algebra library (BLAS or VSIPL) ----------------------------- # ---------------------------------------------------------------------- # LAinc tells the C compiler where to find the Linear Algebra library # header files, LAlib is defined to be the name of the library to be # used. The variable LAdir is only used for defining LAinc and LAlib. # LAdir = $(HOME)/CBLAS/lib LAinc = LAlib = $(LAdir)/cblas_LINUX.a # # ---------------------------------------------------------------------- # - F77 / C interface -------------------------------------------------- # ---------------------------------------------------------------------- # You can skip this section if and only if you are not planning to use # a BLAS library featuring a Fortran 77 interface. Otherwise, it is # necessary to fill out the F2CDEFS variable with the appropriate # options. **One and only one** option should be chosen in **each** of # the 3 following categories: # # 1) name space (How C calls a Fortran 77 routine) # # -DAdd_ : all lower case and a suffixed underscore (Suns, # Intel, ...), [default] # -DNoChange : all lower case (IBM RS6000), # -DUpCase : all upper case (Cray), # -DAdd__ : the FORTRAN compiler in use is f2c. # # 2) C and Fortran 77 integer mapping # # -DF77_INTEGER=int : Fortran 77 INTEGER is a C int, [default] # -DF77_INTEGER=long : Fortran 77 INTEGER is a C long, # -DF77_INTEGER=short : Fortran 77 INTEGER is a C short. # # 3) Fortran 77 string handling # # -DStringSunStyle : The string address is passed at the string loca- # tion on the stack, and the string length is then # passed as an F77_INTEGER after all explicit # stack arguments, [default] # -DStringStructPtr : The address of a structure is passed by a # Fortran 77 string, and the structure is of the # form: struct {char *cp; F77_INTEGER len;}, # -DStringStructVal : A structure is passed by value for each Fortran # 77 string, and the structure is of the form: # struct {char *cp; F77_INTEGER len;}, # -DStringCrayStyle : Special option for Cray machines, which uses # Cray fcd (fortran character descriptor) for # interoperation. # F2CDEFS = # # ---------------------------------------------------------------------- # - HPL includes / libraries / specifics ------------------------------- # ---------------------------------------------------------------------- # HPL_INCLUDES = -I$(INCdir) -I$(INCdir)/$(ARCH) $(LAinc) $(MPinc) HPL_LIBS = $(HPLlib) $(LAlib) $(MPlib) # # - Compile time options ----------------------------------------------- # # -DHPL_COPY_L force the copy of the panel L before bcast; # -DHPL_CALL_CBLAS call the cblas interface; # -DHPL_CALL_VSIPL call the vsip library; # -DHPL_DETAILED_TIMING enable detailed timers; # # By default HPL will: # *) not copy L before broadcast, # *) call the BLAS Fortran 77 interface, # *) not display detailed timing information. # HPL_OPTS = -DHPL_CALL_CBLAS # # ---------------------------------------------------------------------- # HPL_DEFS = $(F2CDEFS) $(HPL_OPTS) $(HPL_INCLUDES) # # ---------------------------------------------------------------------- # - Compilers / linkers - Optimization flags --------------------------- # ---------------------------------------------------------------------- # CC = /usr/bin/gcc CCNOOPT = $(HPL_DEFS) CCFLAGS = $(HPL_DEFS) -fomit-frame-pointer -O3 -funroll-loops # # On some platforms, it is necessary to use the Fortran linker to find # the Fortran internals used in the BLAS library. # LINKER = ~/BLAS LINKFLAGS = $(CCFLAGS) # ARCHIVER = ar ARFLAGS = r RANLIB = echo # # ---------------------------------------------------------------------- Make output: ~/BLAS -DHPL_CALL_CBLAS -I/homes/laket/hpl-2.1/include -I/homes/laket/hpl-2.1/include/Linux_PII_CBLAS -I/usr/local/include -fomit-frame-pointer -O3 -funroll-loops -o /homes/laket/hpl-2.1/bin/Linux_PII_CBLAS/xhpl HPL_pddriver.o HPL_pdinfo.o HPL_pdtest.o /homes/laket/hpl-2.1/lib/Linux_PII_CBLAS/libhpl.a /homes/laket/CBLAS/lib/cblas_LINUX.a /usr/local/lib/libmpi.so /bin/bash: /homes/laket/BLAS: Is a directory make[2]: *** [dexe.grd] Error 126 make[2]: Target `all' not remade because of errors. make[2]: Leaving directory `/homes/laket/hpl-2.1/testing/ptest/Linux_PII_CBLAS' make[1]: *** [build_tst] Error 2 make[1]: Leaving directory `/homes/laket/hpl-2.1' make: *** [build] Error 2 make: Target `all' not remade because of errors. Make -d output: Considering target file `/homes/laket/hpl-2.1/lib/Linux_PII_CBLAS/libhpl.a'. Looking for an implicit rule for `/homes/laket/hpl-2.1/lib/Linux_PII_CBLAS/libhpl.a'. Trying pattern rule with stem `libhpl.a'. Trying implicit prerequisite `/homes/laket/hpl-2.1/lib/Linux_PII_CBLAS/libhpl.a,v'. Trying pattern rule with stem `libhpl.a'. Trying implicit prerequisite `/homes/laket/hpl-2.1/lib/Linux_PII_CBLAS/RCS/libhpl.a,v'. Trying pattern rule with stem `libhpl.a'. Trying implicit prerequisite `/homes/laket/hpl-2.1/lib/Linux_PII_CBLAS/RCS/libhpl.a'. Trying pattern rule with stem `libhpl.a'. Trying implicit prerequisite `/homes/laket/hpl-2.1/lib/Linux_PII_CBLAS/s.libhpl.a'. Trying pattern rule with stem `libhpl.a'. Trying implicit prerequisite `/homes/laket/hpl-2.1/lib/Linux_PII_CBLAS/SCCS/s.libhpl.a'. No implicit rule found for `/homes/laket/hpl-2.1/lib/Linux_PII_CBLAS/libhpl.a'. Finished prerequisites of target file `/homes/laket/hpl-2.1/lib/Linux_PII_CBLAS/libhpl.a'. No need to remake target `/homes/laket/hpl-2.1/lib/Linux_PII_CBLAS/libhpl.a'. Finished prerequisites of target file `dexe.grd'. Must remake target `dexe.grd'. ~/BLAS -DHPL_CALL_CBLAS -I/homes/laket/hpl-2.1/include -I/homes/laket/hpl-2.1/include/Linux_PII_CBLAS -I/usr/local/include -fomit-frame-pointer -O3 -funroll-loops -o /homes/laket/hpl-2.1/bin/Linux_PII_CBLAS/xhpl HPL_pddriver.o HPL_pdinfo.o HPL_pdtest.o /homes/laket/hpl-2.1/lib/Linux_PII_CBLAS/libhpl.a /homes/laket/CBLAS/lib/cblas_LINUX.a /usr/local/lib/libmpi.so Putting child 0x0129a2c0 (dexe.grd) PID 24853 on the chain. Live child 0x0129a2c0 (dexe.grd) PID 24853 /bin/bash: /homes/laket/BLAS: Is a directory make[2]: Reaping losing child 0x0129a2c0 PID 24853 *** [dexe.grd] Error 126 Removing child 0x0129a2c0 PID 24853 from chain. Failed to remake target file `dexe.grd'. Finished prerequisites of target file `dexe'. Giving up on target file `dexe'. Finished prerequisites of target file `all'. Giving up on target file `all'. make[2]: Target `all' not remade because of errors. make[2]: Leaving directory `/homes/laket/hpl-2.1/testing/ptest/Linux_PII_CBLAS' Reaping losing child 0x010ce900 PID 24841 make[1]: *** [build_tst] Error 2 Removing child 0x010ce900 PID 24841 from chain. Failed to remake target file `build_tst'. make[1]: Leaving directory `/homes/laket/hpl-2.1' Reaping losing child 0x00d91ae0 PID 24774 make: *** [build] Error 2 Removing child 0x00d91ae0 PID 24774 from chain. Failed to remake target file `build'. Finished prerequisites of target file `install'. make: Target `all' not remade because of errors. Giving up on target file `install'. Finished prerequisites of target file `all'. Giving up on target file `all'. Thanks!

  Read the article

• What is your longest-held programming assumption that turned out to be incorrect?

  - by Demi

  I am doing some research into common errors and poor assumptions made by junior (and perhaps senior) software engineers. What was your longest-held poor assumption that was eventually corrected? For example: I at one point failed to understand that the size of an integer was not a standard (depends on the language and target). A bit embarrassing to state, but there it is. Be frank: what hard-held belief did you have, and roughly how long did you maintain the assumption? It can be about an algorithm, a language, a programming concept, testing, anything under the computer science domain.

  Read the article

• Where to add the PHP script and MYSQL Dump code in the LAMP server?

  - by primal

  Hi, I dont know if this is the right place to ask this question. But as time is limited and here I have always got the right answers I am asking it away. I want to setup a login page on a local server so as to communicate with it via android. As time permits, I googled and found out the necessary php script and mySQL code needed for the same. I don't know where to add these code in the local server and connect them. :( (This is mainly for testing purpose as we would develop a website in Django latter on.) Any help would be much appreciated..

  Read the article

• logic of button to be disabled or not in mvc

  - by rod

  Hi All, Here's an excerpt from a book I'm reading about application design with MVC: Ideally, the view is so simple and logic-free as to need virtually no testing. Users (and developers before users) can reasonably test the view by simply looking at the pixels on the screen. Anything else beyond pure graphical rendering should ideally be taken out of the view and placed in the controller and model. This includes, for example, the logic that determines whether a certain button should be enabled or grayed out at some point. what does the bold statement mean to you? what would this look like? thanks, rod.

  Read the article

• Too many values problem

  - by DraskyVanderhoff

  Hi , i was trying to make a full lot of ips for testing using this code : ip_is = [i for i in range(256)] ports = [i for i in range(1024,49152)] return [str(i1)+"."+str(i2)+"."+str(i3)+"."+str(i4)+":"+str(p) for i1,i2,i3,i4,port in ip_is,ip_is,ip_is,ip_is,ports] The problem is the 3rd line in which is made the ip list. If there is a way to make it all at once or how can make one at time in a lazy way ? I'm pretty noob at python :P. Thanks for the Help :)

  Read the article

• how to disable web page cache throughout the servlets

  - by Kurt

  To no-cache web page, in the java controller servlet, I did somthing like this in a method: public ModelAndView home(HttpServletRequest request, HttpServletResponse response) throws Exception { ModelAndView mav = new ModelAndView(ViewConstants.MV_MAIN_HOME); mav.addObject("testing", "Test this string"); mav.addObject(request); response.setHeader("Cache-Control", "no-cache, no-store"); response.setHeader("Pragma", "no-cache"); response.setDateHeader("Expires", 0); return mav; } But this only works for a particular response object. I have many similar methods in a servlet. And I have many servlets too. If I want to disable cache throughout the application, what should I do? (I do not want to add above code for every single response object) Thanks in advance.

  Read the article

• SQL Injection on INSERT

  - by freddy

  Hi, I'm currently testing Vulnerabiltys to SQL Injections for my companys application as an it-trainee. So I found, that the application is indeed vulnerable to injections because I can alter some of the insert statements. So I altered the insert Statement to this: INSERT INTO tablename( column, column1, column2, column3, column4,column5, column6, column7, column8 ) VALUES ( 10965972, 185796154, 25, 23,2023, '', CURRENT_DATE, 'v0201100', 18); DELETE * FROM tablename;-- , 2023,'a', CURRENT_DATE, 'v0201100', 18 ) I thought this should be a correct statement, but the MySQL Server returned this Error: MySQL Error: 1064 (You have an error in your SQL syntax;[...] Would be nice if somebody could help and tell my why the syntax is wrong... Thanks for your help :-)

  Read the article

• What is the functionality of "sync contacts" in Exchange account in Email application?

  - by santhosh

  Hi i am testing android E-mail application . I have configured an Exchange account where in i could find an option "Sync Contacts from this account" in Account settings. According to my understanding if i check "sync contacts from the account" option , i must be able to access contacts in the exchange account i have configured. But i don't know how to get/access these contacts in android email application. Can any one who have used this functionality or know about it can suggest to me how to make use of "Sync contacts" functionality. Or if you have any idea about, how i can test this functionality, i am very eager to here to you. Kinds & Regards Santhosh Kumar H.E

  Read the article

• GCC, functions, and pointer arguments, warning behaviour

  - by James Morris

  I've recently updated to a testing distribution, which is now using GCC 4.4.3. Now I've set everything up, I've returned to coding and have built my project and I get one of these horrible messages: *** glibc detected *** ./boxyseq: free(): invalid pointer: 0x0000000001d873e8 *** I absolutely know what is wrong here, but was rather confused as to when I saw my C code where I call a function which frees a dynamically allocated data structure - I had passed it an incompatible pointer type - a pointer to a completely different data structure. warning: passing argument 1 of 'data_A_free' from incompatible pointer type note: expected 'struct data_A *' but argument is of type 'struct data_B *' I'm confused because I'm sure this would have been an error before and compilation would never have completed. Is this not just going to make life more difficult for C programmers? Can I change it back to an error without making a whole bunch of other warnings errors too? Or am I loosing the plot and it's always been a warning?

  Read the article

• C++: ifstream::getline problem

  - by Jay

  I am reading a file like this: char string[256]; std::ifstream file( "file.txt" ); // open the level file. if ( ! file ) // check if the file loaded fine. { // error } while ( file.getline( string, 256, ' ' ) ) { // handle input } Just for testing purposes, my file is just one line, with a space at the end: 12345 My code first reads the 12345 successfully. But then instead of the loop ending, it reads another string, which seems to be a return/newline. I have saved my file both in gedit and in nano. And I have also outputted it with the Linux cat command, and there is no return on the end. So the file should be fine. Why is my code reading a return/newline? Thanks.

  Read the article

< Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >