Search Results

Search found 13467 results on 539 pages for 'port mapping'.

Page 363/539 | < Previous Page | 359 360 361 362 363 364 365 366 367 368 369 370  | Next Page >

• hung up troubleshooting packet discards

  - by Chris Satola

  I realize my question is generic, but hopefully someone may have some guidance for me. My network consists of Cisco switches. I am seeing a significant amount (upwards of millions of packets per day) transmit drops between two switches. One being a 3750 and the other a 3560. The peak throughput of this link is only upper 400Mbps, so it shouldn't be a bandwidth issue. At this point, I am sort of clueless where to look or what tools I can use to determine what packets are dropping and why. I can setup a SPAN port on that link and wireshark it, but I don't know if that could tell me anything. Does anyone have any suggestions? Thanks in advance.

  Read the article

• SSH Proxy (SOCKS) through remote computer - TCP & DNS

  - by Moz Morris

  My problem: Need DNS to be resolved through my remote machine. So I have a REMOTE that I can access from LOCAL via SERVER. This REMOTE can access a host TARGET_HOST. TARGET_HOST is setup in REMOTE's host file like so: 123.123.123.123 TARGET_HOST I want to be able to access (in the browser & my application) TARGET_HOST from LOCAL. I have setup a 'proxy' like so: LOCAL to SERVER: ssh -L 4567:LOCAL:4568 user@SERVER SERVER to REMOTE: ssh -D 4568 user@REMOTE LOCAL's network config is setup to use a proxy on localhost through port 4567. So, everything is great and I can see TARGET_HOST in my browser. The problem I have is that the DNS doesn't resolve from LOCAL and therefore some code I have going on in my application, fails. Can anyone help me? Can anyone suggest a better method?

  Read the article

• Installing SSL certs with nginx on Amazon EC2

  - by Ethan

  I finally got a cert from an authority and am struggling to get things working. I've created the appropriate combined certificate (personal + intermediate + root) and nginx is pointing to it. I got an elastic IP and connected it to my EC2 instance. My DNS records point to that IP. But when I point the browser to the hostname, I get the standard "Connection Untrusted" bit, with ssl_error_bad_cert_domain. Port 443 is open - I can get to the site over https if I ignore the warning. Weird thing is, under technical details, it lists the domain I tried to access as valid! When I try and diagnose with ssl testing sites, they don't even detect a certificate! What am I missing here? domain is yanlj.coinculture.info. Note I've got coinculture.info running on a home server without a dedicated IP and have the same problem, but I'll be moving that to the same EC2 instance as soon as I figure this thing out. I thought the elastic IP would solve things but it hasn't

  Read the article

• How complex of a daemon should be run through inetd?

  - by amphetamachine

  What is the general rule for which daemons should be started up through inetd? Currently, on my server, sshd, apache and sendmail are set up to run all the time, where simple *NIX services are set up to be started by inetd. I'm the only one who uses ssh on my computer, and break-in attempts aren't a problem because I have it running on a non-standard port, and my HTTP server gets maybe 5 hits a day that aren't GoogleBot. My question is, what are the benefits vs. the performance hits associated with running a complex daemon like sshd or apache through superserver, and what, if any successes or failures have you had running your own daemons in this manner?

  Read the article

• Issues with FTP on my server

  - by homestead

  I installed FTP on my windows 2003 box I created a FTP site on a ipaddress, I am not allowing anonymous access. I created a user that has access to the folder c:\ftptest connecting to my server using filezilla shows: connectiong to -0.0.0.0 connection established, waiting for welcome message could not connect to server I tried both active and passive modes. The port on the server is open i.e. TCP 21 I can connect to other FTP sites so my locla firewall isnt' the issue. (now I know why sys admin work is so fun!)

  Read the article

• netcat as a multithread server

  - by etuardu

  Hello, I use netcat to run a simple server like this: while true; do nc -l -p 2468 -e ./my_exe; done This way, anyone is able to connect to my host on port 2468 and talk with "my_exe". Unfortunately, if someone else wants to connect during an open session, it would get a "Connection refused" error, because netcat is no longer in listening until the next "while" loop. Is there a way to make netcat behave like a multithread server, i.e. always in listening for incoming connections? If not, are there some workarounds for this? Thank you all!

  Read the article

• After closing the ssh terminal, the thin server is down

  - by Keating Wang

  I have a rails project run on the thin server(1.3.1) on a ubuntu server. I ssh to the server and start thin with command 'thin start -C config/thin.yml', following the thin.yml, port: 3000 log: log/thin.log timeout: 30 chdir: /home/byht/56platform/dev/tracker environment: production servers: 1 daemonize: true After thin starts successfully, I visit the project and it works well. Then, I close the terminal, I can also visit the pages that have been visited, but when I visit the pages that not been visited before closing ssh terminal, a "500" error appears on the page. I didn't find the error messages in the log file. I have tried start thin with nohup and sudo, but they are useless. I sign in the ubuntu server locally, then the problem disappears. But I need sign in the server to stat thin with ssh when I'm home.

  Read the article

• How Do I Change the Windows7 LAN Proxy Config from the Command Line

  - by david.barkhuizen

  In Windows7, Is it possible to define/change the proxy config from the command line ? So, using the gui, I would go: Start Control Panel Network and Internet Internet Options Connections LAN Settings and then - enable/disable the proxy - define IP:port of proxy server But I would like to rather do this from the command line (so that I can run the command from a batch-file with a shortcut key - enabling me to switch proxy configs using a short-cut, rather than having to wade through the MS wizard). I've looked at using netsh.exe to change the settings for WinHTTP, but this seems to be thr wrong thing to do, as the WinHTTP setting do not appear to be related to the LAN settings. Much appreciated folks.

  Read the article

• other computer in the network cannot connect to mysql database

  - by user28233

  I have a vb.net program that uses mysql as its database. And it works when the computer has wampservr installed. But the program gets an unhandled exception error when the computer where its running does not have a wampserver. The only thing that is installed in it is the mysql connector net. How do I make it work. I just want the two programs to access the same mysql database. I already opened port 20 by configuring firewall. Both in TCP and UDP. What do I do? Do I have to tweak the codes? Anyone in here who have tried this before?

  Read the article

• other computer in the network cannot connect to mysql database

  - by user23950

  I have a vb.net program that uses mysql as its database. And it works when the computer has wampservr installed. But the program gets an unhandled exception error when the computer where its running does not have a wampserver. The only thing that is installed in it is the mysql connector net. How do I make it work. I just want the two programs to access the same mysql database. I already opened port 20 by configuring firewall. Both in TCP and UDP. What do I do? Do I have to tweak the codes? Anyone in here who have tried this before?

  Read the article

• How to stop syslog from listening to 514 on CentOS 5.8

  - by Jim

  I have a CentOS 5.8 machine (with regular syslog) that for some reason is listening to port 514, even though it is not started with "-r" (to receive remote syslog messages). # netstat -tulpn | grep 514 udp 0 0 0.0.0.0:514 0.0.0.0:* 2698/syslogd Syslog is started with only "-m 0": ps -ef | grep syslogd root 2698 1 0 15:55 ? 00:00:00 syslogd -m 0 I have tried starting it with "-m 0 -r", just to check if there was any difference, but there is not. This machine is a client and should only log to a central log server - it should not be listening itself. What am I missing?

  Read the article

• Forwarding emails to nonexisting users/aliases to external mail server

  - by Niclas Lindqvist

  I'm in the works of installing a postfix mailserver on a machine currently being used as web server. As of right now, I've got it working as far as that I can send and receive emails using telnet through port 25. However, as my customer is concerned with downtime, I'd like to setup all the accounts one by one over time, and making sure it works, rather than just cutting the cord to the old mail server and start creating new accounts on the new system. How can I add the domain customer.com to my mail server and just add something like [email protected] to the users and aliases-lists without the web server trying to send all emails with the @customer.com domain to the new mail server? I'm running ubuntu, using postfix and postfix-mysql on the new machine, the old mail server is on a hosted environment somewhere else, where I don't have any control.

  Read the article

• Remote Desktop over SSH SOCKS proxy to bypass firewall

  - by scrumpyjack

  Hi folks, I'm trying to connect to a Windows server from my Mac using RDC2.1 for Mac. The problem is the server I need to connect to is guarded by the evil dragon - IP-based access control on a completely separate network. I have an IP I can get in on, but it's at my office (i.e. a completely separate network). Because that network isn't set up for VPN, I've set up a SOCKS proxy through an SSH tunnel (which is all working fine). (SSH proxy) Me (on my Mac) ----------> Office Linux box ----> Windows server (home network) (office network) (other network) From my Linux server in my office (the SSH server) I can telnet to port 3389 on the Windows server, no problem. But from my Mac I can't get so much as a squeak out of it. Any ideas?

  Read the article

• telnet to 3389 connects, RDP remote desktop app bails ?

  - by scott_lotus

  I can TELENT 192.168.10.10 3389 and get a connection. But RDP client to 192.168.10.10 immedietly bails (i.e less then 1 sec) "connect" button greys briefly, RDP app remains on screen. Have tried these from many nodes on the subnet to 192.168.10.10 with same result. On 192.168.10.10 Allow Remote Desktop is enabled. On 192.168.10.10 windows firemall is off. Im connecting from the same subnet i.e no firewall hardware / routers in the way. AV software is installed but other nodes on same subnet allow RDP connection using exact same AV settings (network group profile) Checked 192.168.10.10 for any additonal AV software or local firewall products. Im sure non exist. Checked regedit to ensure 3389 was the port set for listening. Seems to be an XP problem (sp3) ( 2 nodes on the my LAN have this issue) and many work fine. Thanks for any help Scott

  Read the article

• Squid: problem with FTP service (Windows Server)

  - by Diego

  I followed the instructions on this question and everythig works fine. I have an DHCP server that assigns "IP client" without gateway. Internet with IE or Firefox Browser works but FTP service doesn't work. In squid.conf I have put a line: acl Safe_ports port 80 21 443 389 5307 8080 3144 8282 88 8443 20443 11438 1443 8050 30021 10443 4747 4774 1384 Have I to put gateway in DHCP Server? Have you any suggestion for me? Thanks for your help!

  Read the article

• Route an IP from WAN to a host on LAN on OpenWRT

  - by Zsub

  EDIT: I know how to use NAT, I specifically want the server to be reachable on two IP's, one private, one public, with the firewall of the OpenWRT in between, if feasible. At the office we have recieved a /29 from our ISP. The first address is reserved for their endpoint, so I'm free to use five addresses. We run a local network, so of course there is a router in between running OpenWRT to provide all hosts with (W)LAN (dhcp from a private range). However, we also have a server running OS X Server 10.6 (Snow Leopard) and I'd like that server to be accessible both from the LAN using a private IP as well as from the WAN on it's own public IP. Point of note is that the server only has one network port, so multiple NICs is not an option, unfortunately. How would I go about doing this?

  Read the article

• Web service not accessible from behind corporates firewalls - how come?

  - by Niro

  We run a Saas serving a widget which is embedded in customer websites. The service include static javascript code hosted on amazon S3 and dynamic part hosted on EC2 with Scalr (using scalr name servers). We received some feedback from users behind corporate firewalls that they cant access our service (while they can access the sites including the widget). This does not make sense to me since the service is using normal http calls on port 80 and our URL is quite new without any reason to be banned by firewalls. My questions are: 1. Why is the service is not accessible and what can I do about it? 2. Is it possible that one of the following is blocked by corporate firewalls: Amazon s3, the dynamic IP address provided by amazon, Scalr name servers. Any other possible reasons, way to check them and remedies for this? Thanks!

  Read the article

• Connecting to a VirtualBox machine from the host, using an ip address

  - by Doron

  Hello, In a macbook host, I run VirtualBox having a guest ubuntu server, with a NAT network setting. In the virtual machine application "Parallels", I would get on the host an IP address of the guest, to which I could later set hostnames and access it directly. However, I couldn't find a way to accomplish this using VirtualBox. The only solution VirtualBox has for me, is to set port forwarding, and access "localhost" with these ports. How can I have the desired behavior set up, without having to change to a bridged network settings, and expose my guest computer to the network my host computer is connected to ? Thanks.

  Read the article

• Deprioritize BitTorrent traffic

  - by Steven Xu

  I'm sure the question has been asked before, but I can't seem to find it for myself; my Google-fu eludes me. My router, the Linksys E2000, does a decent job at being reasonable about prioritizing some sorts of traffic above BitTorrent traffic (there isn't too much interruption to port 80, 443, or 22 traffic, the ones I use most often). But other ports get pummeled. For instance, 3000 (which I use for local Rails testing) becomes almost entirely non-functioning. Xbox Live traffic (not sure about the ports, but they are in the 1000 range) doesn't do well either. So I'm wondering how to ensure that XBL and local Rails testing maintain strong service while BitTorrent is going. Is it enough that I turn up the QoS on their associated ports to high? It doesn't seem to be as effective as when BitTorrent isn't running at all (I don't know if there's a way to deprioritize BitTorrent traffic).

  Read the article

• What settings need to be changed to allow EC2 instances to use Amazon's Route 53 for DNS?

  - by ks78

  I have a number of Amazon EC2 instances, all running Ubuntu, which I'd like to configure to use Amazon's Route 53. I setup a script, following Shlomo Swidler's article, but ran into script-related issues, which were answered here. Now, I have the script working, but my instances are still not able to access Route 53's DNS. By this I mean, they are not able to resolve hostnames to IP addresses. My instances are currently configured with the DNS server IP address Amazon pushes out to them by default, does that need to be changed when using Route 53? I'm also IP-restricting my instances using the Security Groups. Could that be the problem? Is there a certain IP address or port I should open to allow communication with Route 53? It seems that DNS requests should be originating from my instances so the Security Groups shouldn't be an issue, but I've been wrong before. If anyone has any ideas, I'd really appreciate it.

  Read the article

• Setting up thttpd to run vqadmin or qmailadmin...keep getting 404s

  - by Ian

  I run nginx for my web server but wanted to quickly toss up thttpd so I could do some maintainenace using either vqadmin or qmailadmin. Those files are located at: /usr/local/apache/cgi-bin/qmailadmin and /usr/local/apache/cgi-bin/vqadmin/vqadmin.cgi. My /etc/thttpd.conf is: host=127.0.0.1 port=8000 user=apache logfile=/var/log/thttpd.log pidfile=/var/run/thttpd.pid dir=/usr/local/apache/cgi-bin nochroot cgipat=**.cgi When I use lynx to go to http://127.0.0.1:8000/cgi-bin/vqadmin/vqadmin.cgi, thttpd tosses a 404. Any idea how to get this working? Many thanks.

  Read the article

• Apache configuration to accept all data

  - by ServerDown

  Hi, I have apache running on port 7979 to talk with a device that sends data to webserver and later will run php scripts to process and send reply xml. The problem now is that it sends data like POST HTTP/1.1 Content-Type:text/xml Content-Length:369 Followed by XML When apache sees this it gives a 400 error. Since the device cannot be changed is there any way to accept the full data sent from the device and write to some log? Currently apache simply keeps sending 400 errors back. If there was a way to log the entire xml or create some custom handler for 400 error then the xml could be read by a php script. Looking forward to solutions.

  Read the article

• Is an Ethernet point to point connection without a switch real time capable?

  - by funksoulbrother

  In automation and control, it is commonly stated that ethernet can't be used as a bus because it is not real time capable due to packet collisions. If important control packets collide, they often can't keep the hard real time conditions needed for control. But what if I have a single point to point connection with Ethernet, no switch in between? To be more precise, I have an FPGA board with a giga-Ethernet port that is connected directly to my control PC. I think the benefits of giga Ethernet over CAN or USB for a p2p connection are huge, especially for high sampling rates and lots of data generation on the FPGA board. Am I correct that with a point to point connection there can't be any packet collisions and therefore a real time environment is given even with ethernet? Thanks in advance! ~fsb

  Read the article

• LAN access via USB from Ipod Touch?

  - by Alec

  I need to browse the local web server from my Ipod Touch to test apps we're developing. I'm not allowed to install a separate wireless access point which would be the easiest solution. Can I use the USB cable for this? Also, the local PC is a Dell Mini 9 running Ubuntu. Has anyone managed to use the wireless port to create an ad hoc connection to an Ipod Touch so the Ipod can browse the Ubuntu web server? This would be an alternate option for me. Thank you!

  Read the article

• How do multiple displays work on a AMD 785G / ATI HD 4200 motherboard?

  - by aireq

  I just ordered a ASUS M4A785TD-V EVO which has the AMD 785G chipset and HD4200 integrated graphic. The board has VGA, DVI, and HDMI outputs. I'm wondering how many outputs I can run at once, and from what connectors? My guess is that I can only use the VGA, and either the DVI or the HDMI in a dual setup. But not the HDMI and the DVI at the same time. Is this correct? If I have devices plugged into both the HDMI and the DVI ports is there a way to choose between which port I want to use? I have a dual 19" monitor setup, as well as a LCD TV. I'd like to run the VGA and the DVI into my two monitors, and then the HDMI to my TV. Then when I want to watch something on the TV I'd like to be able to switch over from the DVI to the HDMI. Is this possible with out crawling under my desk and unplugging/plugging things in?

  Read the article

< Previous Page | 359 360 361 362 363 364 365 366 367 368 369 370  | Next Page >