Search Results

Search found 12705 results on 509 pages for 'ip routing'.

Page 364/509 | < Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >

• How to reset password for Dell PowerConnect 2708?

  - by oherrala

  I do as the user manual says and press "Managed Mode" button to get into unmanaged mode and then press "Managed Mode" button again for managed mode. This should reset the device to factory defaults and username "Admin" with no password. However, the device resets (I think) and I can access the web console from IP 192.168.2.1, but the username and password doesn't work. Maybe the device doesn't reset after all. Or the username/password has been changed in some firmware upgrade? What should I do to get into management of this switch?

  Read the article

• AnyConnect SSL VPN split tunneling for a single website?

  - by Daniel Lucas

  We have a Cisco ASA 5510. We use split tunneling for AnyConnect SSL VPN clients. All internal addresses are tunnelled. Everything else is routed through the client's own internet connection. We use a SaaS service that only responds to requests when they come from one of our own public IP addresses. Because of this, VPN users are unable to access it currently. Is there a way to specify that a specific website should be tunneled and all others should not? NOTE: Worst case we will use a web bookmark on the clientless portal to tranlate through our network, but I'd like to see if the above is possible first.

  Read the article

• Adsense-type services without the content check?

  - by Ryan Ahearn

  Are there any ad-placing services that don't mind that the page is nothing but a page of ads? Someone else with a .cn tld is pointing to my IP address. I currently have that site on its own name based virtual host that responds to every request with a 403, but I figure if I am paying for the incoming bandwidth, I might as well try to make some money off it. I don't want to actually create any content for this site, which prevents me from using adsense. My only requirements are that it is free for me to sign up and that they don't mind the lack of content.

  Read the article

• vnc connection from linux to windows ce

  - by JosiP

  Im having troubles while im trying to connect from linux to Windows CE, via VNC viewer. Here is what i can see on log: /usr/bin/vncviewer 10.1.1.57 VNC Viewer Free Edition 4.1.2 for X - built Apr 20 2011 12:04:25 Copyright (C) 2002-2005 RealVNC Ltd. See http://www.realvnc.com for information on VNC. Tue Jul 2 12:15:04 2013 CConn: connected to host 10.1.1.57 port 5900 CConnection: Server supports RFB protocol version 3.5 CConnection: Using RFB protocol version 3.3 TXImage: Using default colormap and visual, TrueColor, depth 24. CConn: Using pixel format depth 6 (8bpp) rgb222 CConn: Using ZRLE encoding I cannot see anything - only black screen. Restarting device does not help. Device is connected directly to machine by crossed ethernet cable, and its IP is assigned by DHCP. Any clues, ideas, what can i do to get normal view ? best regards J.

  Read the article

• How do I send email with sendmail to external hosts?

  - by Jake

  If I wanted to send an email to a user on the same linux machine, I can run: echo -e "Subject: Foo\n\nBar\n" | sendmail -v jacob But if I run: echo -e "Subject: Foo\n\nBar\n" | sendmail -v [email protected] It will give me the error: 050 >>> MAIL From:<jacob@mu> SIZE=321 050 550 5.1.8 Cannot resolve your domain {mx-us011} If my machine has access to the internet but is behind a router and has no domain associated with it, can I use sendmail to send mail to this address? Do I need to connect through an SMTP server? Can I do that with sendmail? If I use sendmail's -f option and put my gmail account there it will work. Can (or should I) I use my IP address? echo -e "Subject: Foo\n\nBar\n" | sendmail -v -f [email protected] [email protected] I'm a bit lost on how all this comes together in sending mail from the command line.

  Read the article

• FreeBSD: Samba performance over GBit-Ethernet

  - by Axel Gneiting

  I'm using a FreeBSD NAS with RAID-Z. I can read ~300MB/s from the ZFS disks to /dev/null on the box, but only get about 50MB/s over GBit-Ethernet with SMB to Windows 7 (Samba 3.5.6). Both systems have Intel-PCIe-NICs and are connected directly. Samba is configured to use AIO and I already tried to tune TCP/IP: kern.ipc.maxsockbuf=16777216 net.inet.tcp.sendspace=1048576 net.inet.tcp.recvspace=1048576 net.inet.tcp.sendbuf_max=8388608 net.inet.tcp.recvbuf_max=8388608 net.inet.tcp.delayed_ack=0 Any ideas what's causing the bottleneck? I think the link should handle 100 MB/s easily.

  Read the article

• Ethernet switch not working

  - by Froskoy

  I've just tried using two different ethernet switches on my network to replace an 8-port Netgear gigabit ethernet switch, which works fine, but doesn't have enough ports for what I need. Computers are connected to a TP-Link TD-8840T router via a switch. They use DHCP for IP address assignment. One switch is a TigerSwitch 6924M, which I'd expect to be difficult to set up, since it is second hand and has an advanced configuration menu, which I can't access without a serial port. However, the second switch that I tried is a new TP-Link TL-SF024, which doesn't appear to have any configuration options, so that can't be the problem. When I say "not working," I mean that although they display that they are connected to a network, they cannot access the internet. For example commands like "ping -c10 google.co.uk" come up with 100% packet loss. What could be causing the problem and how do I fix it?

  Read the article

• How do we keep Active Directory resilient across multiple sites?

  - by Alistair Bell

  I handle much of the IT for a company of around 100 people, spread across about five sites worldwide. We're using Active Directory for authentication, mostly served to Linux (CentOS 5) systems via LDAP. We've been suffering through a spate of events where the IP tunnel between the two major sites goes down and the secondary domain controller at one site can't contact the primary domain controller at the other. It seems that the secondary domain controller starts denying user authentication within minutes of losing connectivity to the primary. How do we make the secondary domain controller more resilient to downtime? Is there a way for it to cache the entire directory and/or at least keep enough information locally to survive a multi-hour disconnection? (We're all in a single organizational unit if that makes any difference.) (The servers here are Windows Server 2003; don't assume that we set this up correctly. I'm a software engineer, not an IT specialist.)

  Read the article

• Mount TMPFS instead of ro /dev

  - by schiggn

  I am working on a ARM-Based embedded system with a custom Debian Linux based on kernel 2.6.31. In the final system, the Root file system is stored as squashfs on flash. Now, the folder /dev is created by udev, but since there is no hot plugging functionality needed and booting time is critical, I wanted to delete udev and "hard code" the /dev folder (read here, page 5). because i still need to change parameters of the devices (with ioctl /sysfs) this does not work for me in this case. so i thought of mounting a tmpfs on /dev and change the parameters there. is this possible? and how to do best? my approach would be: delete /dev from RFS create tar containing basic devices mount tmpfs /dev untar tar-file into /dev change parameters Could this work? Do you see any problems? I found out, that you can mount on top of already mounted mount point, is it somehow possible just to take data with while mounting the new file system? if so that would be very convenient! Thanks Update: I just tried that out, but I'm stuck at a certain point. I packed all my devices into devices.tar, packed it into /usr of my squashfs and added the following lines to mountkernfs.sh, which is executed right after INIT. #mount /dev on tmpfs echo -n "Mounting /dev on tmpfs..." mount -o size=5M,mode=0755 -t tmpfs tmpfs /dev mknod -m 600 /dev/console c 5 1 mknod -m 600 /dev/null c 1 3 echo "done." echo -n "Populating /dev..." tar -xf /usr/devices.tar -C /dev echo "done." This works fine on the version over NFS, if I place printf's in the code, I can see it executing, if I comment out the extracting part, its complaining about missing devices. Booting OK mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 IP-Config: Unable to set interface netmask (-22). Looking up port of RPC 100003/2 on 192.168.1.234 Looking up port of RPC 100005/1 on 192.168.1.234 VFS: Mounted root (nfs filesystem) on device 0:14. Freeing init memory: 136K INIT: version 2.86 booting Mounting /dev on tmpfs...done. Populating /dev...done. Initializing /var...done. Setting the system clock. System Clock set to: Thu Sep 13 11:26:23 UTC 2012. INIT: Entering runlevel: 2 UBI: attaching mtd8 to ubi0 Commenting out the extraction of the tar mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 IP-Config: Unable to set interface netmask (-22). Looking up port of RPC 100003/2 on 192.168.1.234 Looking up port of RPC 100005/1 on 192.168.1.234 VFS: Mounted root (nfs filesystem) on device 0:14. Freeing init memory: 136K INIT: version 2.86 booting Mounting /dev on tmpfs...done. Populating /dev...done. Initializing /var...done. Setting the system clock. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Unable to set System Clock to: Thu Sep 13 12:24:00 UTC 2012 ... (warning). INIT: Entering runlevel: 2 libubi: error!: cannot open "/dev/ubi_ctrl" So far so good. But if I pack the whole story into a squashfs and boot from there, it is acting strange. It's telling me while booting that it is unable to open an initial console and its throwing errors on mounting the UBIFS devices, but finally provides a login anyway. Over that my echo's are not executed. If I then log in, /dev is mounted as TMPFS as desired and all the devices reside inside. When I redo the "mount" command to mount the UBIFS partitions it is executed whitout problem and useable. From squashfs VFS: Mounted root (squashfs filesystem) readonly on device 31:15. Freeing init memory: 136K Warning: unable to open an initial console. mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 UBIFS error (pid 484): ubifs_get_sb: cannot open "ubi1_0", error -19 Additionally, a part of the rest of the bootscripts is still exexuted, but not all of them. Does anyone has a clue why? Other question, is 5MB enough/too much for /dev?

  Read the article

• Multiple URLs on one domain in IIS 6 [closed]

  - by TGnat

  Possible Duplicate: How to Host Multiple Domains / Web Sites on one IIS6 Server I'm a developer and only know the basics of IIS administration. I want to give each of my clients a personalized URL to access my web site. I have mySite.com and I would like to allow client A to acess the site via A.mySite.com and client B to use B.mySite.com. These would all point the the mySite.com domain with the same ip address. Can this be done in IIS? Do I have to register new domains for each client? Are there other ways to accomplish the same thing?

  Read the article

• scp through ssh gateway connection

  - by zidarsk8

  so my network layou is something like this (I don't have enough reputation to post images so here's the link) http://i.imgur.com/OaD4i.png now Alice has access to SSH gateway (just gateway from now on) with: ssh alice@external.ip and the authorized keys file on the gateway looks like this #/home/Alice/.ssh/authorized_keys command="ssh -t alice@web" ssh-rsa ABCD...E== alice@somehost so when Alice trys to connect to the Gateway with her private key, she actually gets connected to the Web server (the gateway pc can make a connection to the web server with a passwordless private key, so that stays transparent). The question 1) How can I set this up so that Alice will be able to scp things to web server too? 2) I know this makes a separete connection, but is there any way for this to work as a normal ssh so that even something like -R12345:localhost:22 would work?

  Read the article

• 3CX behind UT7.1 using a callcentric.com SIP account

  - by Corey

  Has anyone had any luck with getting 3CX working behind UT7.1 with a SIP account from callcentric.com? I am willing to reset my current UT box back to defaults, and start from there. I have a static public IP assigned to the external interface. My internal addressing is 192.168.76.0 . My 3CX box has 192.168.76.17 . Would anyone be willing to give me a step by step of changes to make in UT / 3CX. I currently have my UT box unplugged, and have replaced it with a Linksys unit. I have port forwarding setup for… TCP/UDP 5060 to 192.168.76.17 UDP 9000-9049 to 192.168.76.17 … and everything works great. I also have additional external IPs available if that helps.

  Read the article

• MinGW MSYS ssh error: Could not create directory '/home/<username>/.ssh'

  - by SoldOut

  I have just installed a fresh MinGW installation on Windows 7 64bit using the Graphical User Interface Installer (the recommended approach) following the instructions given here and keeping the default options (i.e. installation in C:\MinGW) - hopefully without missing any steps or messing things up in any way. However, when running the ssh command, I get the following error: C:\Users\Diablossh username@host Could not create directory '/home/username/.ssh'. The authenticity of host 'username@host (host ip here)' can't be established. RSA key fingerprint is (fingerprint here). Are you sure you want to continue connecting (yes/no)? yes Failed to add the host to the list of known hosts (/home/username/.ssh/known_hosts). So, I basically have to confirm the connection every time. Why does this happen and how do I fix it?

  Read the article

• HP Blade ILO not responding in chassis ILO

  - by bobinabottle

  I have just started at a new company and I am inspecting their current server config. The HP 480c blades in a c7000 chassis aren't responding to ILO, although the chassis ILO is working fine. I have a feeling the last sysadmin configured the blades ILO as static IPs and it is not responding correctly. The servers are sitting in a datacenter and I'm hoping to be able to fix this remotely. Is there a way that I can change the ILO static IPs for the blades remotely? If not and I do have to go onsite, how do I change the IP addresses of the ILO for the blades? (Sorry I'm not very familiar with HP servers) thanks for you help!

  Read the article

• Does sending e-mail in the name of customers increase the risk of being marked as spammer?

  - by Adrian Grigore

  Hi, We are developing a SaaS website application that lets users send invoices to their clients. Ideally, these e-mails should appear to be originating from our customers, so the sender e-mail address domain will not match the reverse IP entry for our server. In effect we would be forging their e-mail address, but of course with their consent. Will that result in a higher probability of being marked as a spammer / their e-mails being marked as spam? If yes, how bad is the penalty? And what about people who have an e-mail address originating form an SPF-enabled domain? I guess it should be the majority of the big e-mail providers.

  Read the article

• Multiple Subnets on home network... would this work?

  - by rockinthesixstring

  We are looking at renting out the basement suit in our home and want to offer internet as part of the package. I however do not want the downstairs tennent to have access to our network (home office = private data). We currently have a pfsense firewall as our gateway and a Windows Server 2003 box is doing our primary DHCP (192.168.0.0/24) and DNS. Here's what I'd like to do... I'd like to setup another subnet on the DHCP server (192.168.1.0/24), and hook in another wireless router (as access point only) and address it as 192.168.1.1... from there the router will hook into our primary switch and then out through the firewall. Will Server 2003 (If I add a 192.168.1.x/24 IP to the nic) serve DHCP to the devices that connect to the new router, and will it isolate that from our network? Thanks in advance... I'm very new to multiple subnets.

  Read the article

• Access Other Computer via ADSL Modem and Router

  - by Sohail

  My network configuration is like this ISP - Modem - Router - Computer and the same goes for my friend. We want to share large files or to access each other's computer. The Passwords to login to the web page of each other modems are known. I mean, we can access each other Modem Web GUI easily ( because we know the WAN IP of each other modem ). The question is how do i access his or how do he access my computer? Is there any way to do so. Remote desktop connection is not working :( Please help

  Read the article

• NIC light is turned off after boot on Redhat 4.6 server

  - by hoffmandirt

  I have a 2950 blade server setup with Red Hat 4.6 installed. I cannot get the NIC to work properly after reinstalling Linux. I activated the NIC, but the NIC light will not turn on when I plug the network cable into the hub. The status light on the hub will not turn on either. If I run ifconfig, the NIC status is UP. Also I can ping the IP address that I assign to the Linux machine, but I can't ping anything else that is plugged into the hub. When I reboot the system, the NIC light will stay on until the system fully boots and then it will turn off again. Is there something else that I need to do to get the NIC working? It appears to be disabled even though ifconfig says that it is UP. Maybe I need to configure something within the blade server (iDRAC)?

  Read the article

• How to secure Firefox traffic (+DNS) through SOCKS proxy under Ubuntu 10.04?

  - by Maarx

  I'm using Ubuntu 10.04, and starting a SOCKS proxy with 'ssh -D', and setting Ubuntu to use it with "System - Preferences - Network Proxy". Firefox uses the proxy, and the proxy's IP appears when I visit a site like http://www.whatismyip.com/. My question is, is Firefox resolving DNS requests through this proxy? Is my web-browsing truly secure? (That is, until I exit the other end of the proxy. I know it's insecure after that.) (And I've verified the keys, I'm not being man-in-the-middled) (And--screw it. You know what I mean. Is it resolving DNS requests through the proxy?) I don't know how I would go about verifying such a thing for myself. Using additional hardware such as another debugging proxy is not an option. If Firefox isn't resolving my DNS requests through the SOCKS proxy, how do I go about fixing it?

  Read the article

• Exposing a WebServer behind a firewall without Port Forwarding

  - by pbreault

  We are deploying web applications in java using tomcat on client machines across the country. Once they are installed, we want to allow a remote access to these web applications through a central server, but we do not want our clients to have to open ports on their routers. Is there a way to tunnel the http traffic so that people connected to the central server can access the web applications that are behind a firewall ? The central server has a static ip address and we have full control over it. Right now, it is a windows box but it could be changed to a linux box if necessary. Our clients are running windows xp and up. We don't need to access the filesystem, we only want to access the web application through a browser. We have looked at reverse ssh tunneling but it shows scaling problem since every packet would have to pass through the central server.

  Read the article

• Problems connecting Centos to the network when running in VMWare

  - by Sakin

  Hi, I installed CentOs on VMware running on windows XP. When trying to configure it to connect to the internet, I get an error message when trying to bring up the network interface: [root@VMLinux ~]# /et/init.d/network start Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... failed [FAILED] VM is running on a machine that has access to the network, I tried it on two different networks that have DHCP enabled. I tried to configure VMWare to use a bridged connection as well as NAT connection. An image of Ubuntu runs fine on the same VMware. What am I missing here? Thanks.

  Read the article

• sendmail is using return-path instead of from address

  - by magd1

  I have a customer that is complaining about emails marked as spam. I'm looking at the header. It shows the correct From: [email protected] However, it doesn't like the return-path. Return-Path: <[email protected]> Received-SPF: neutral (google.com: x.x.x.x is neither permitted nor denied by domain of [email protected]) client-ip=x.x.x.x; Authentication-Results: mx.google.com; spf=neutral (google.com: x.x.x.x is neither permitted nor denied by domain of [email protected]) [email protected] How do I configure sendmail to use the From address for the Return-Path?

  Read the article

• FTP in DMZ, TCP Ports for LDAP Auth

  - by sam

  szenario: (outside)---(ASA5510)---(inside) -Windows2008 DC .....................(dmz) ..........-Win2008 FTP Server Which Ports do I need to open from DMZ-Inside that FTP Users can authentificated on the Inside DC? I have allready opend 389 (Ldap), 636 (secure Ldap) and 53 (dns). But the ftp Client stucks allways after processing the credentials and the FTP Server gives you an eventlog "logon error". the error messages indicates that there could be an issue with closed ports. if I turn the ACL to "IP", that means all ports are open, everything is working fine.

  Read the article

• "Request not supported" in IPCONFIG (WinXP SP3)

  - by pablog

  In a customer PC (Windows XP SP3), suddenly the network went down: the network adapter appears with an error mark. I replaced the network card, but the new one does the same thing. When I enter IPCONFIG, XP shows this error (in standard and safe mode): Internal error occurred Request not supported Unable to query host name If I start the system with a boot cd the PC runs fine, so the problem seems to be in the XP installation. I tried: uninstalling and reinstalling the network card in the Device Manager disabling and reenabling the card netsh int ip reset netsh winsock reset catalog and a couple of "reset" programs (WinsockxpFix.exe, etc) with no luck. Is there any way to fix it without reinstalling XP? TIA, Pablo

  Read the article

• How do I access site.project.rails (running on host) from VMWare fusion?

  - by Johnny Mnemonic

  I have a rails app setup and running on my snow leopard MacBook - the app is being served by Passenger. As part of the setup they had me add entries for 127.0.0.1 site.project.rails in my hosts file so I could reach the site from site.project.rails I can't for the life of me figure out how to get the app show up in VMWare. I have XP setup and browse to http://site.project.rails and I can't get it to show up. I setup a basic rails app, being served at localhost:3000 by webrick, I can get that to load by visiting my hosts ip (http://192.168.1.1:3000/). I added the same hosts I added on my Mac to Windows. I also Bridged the network under settings for the VM. What am I missing?

  Read the article

< Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >