Search Results

Search found 24726 results on 990 pages for 'message passing'.

Page 364/990 | < Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >

• Invoke Haskell function with heterogeneous arguments?

  - by thurn

  I'm currently working on a Haskell project which automatically tests some functions based on an XML specification. The XML specification gives the arguments to each function and the expected result that the function will provide (the arguments are of many different types). I know how to extract the function arguments from the XML and parse them using the read function, but I haven't figured out how to invoke the function using the arguments I get out. What I basically want is to read and store the arguments in a heterogeneous list (my current thinking is to use a list of type Data.Dynamic) and then invoke the function, passing this heterogeneous list as its argument list. Is this possible? Modifying the functions under test is not an option.

  Read the article

• Is it legal to have different SOAP namespaces/versions between the request and response?

  - by Lord Torgamus

  THIRD EDIT: I now believe that this problem is due to a SOAP version mismatch (1.1 request, 1.2 response) masquerading as a namespace problem. Is it illegal to mix versions, or just bad style? Am I completely out of luck if I can't change my SOAP version or the service's? SECOND EDIT: Clarified error message, and tried to reduce "tl;dr"-ness. EDIT: [Link deleted, not related] Using soapUI, I'm sending a request that starts with: <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" ... and getting a response that starts with: <soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" ... I know the service is getting the info, because processes down the line are working. However, my soapUI teststep fails. It has two active assertions: "SOAP Response" and "Not SOAP Fault." The failure marker is next to "SOAP Response," with the following message: line -1: Element Envelope@http://www.w3.org/2003/05/soap-envelope is not a valid Envelope@http://schemas.xmlsoap.org/soap/envelope/ document or a valid substitution. I have tried mixing and matching the namespace prefixes and schema URLs. Changing prefixes seems to have no effect; changing URLs causes a VersionMismatch error. I have also tried to use a substitution group, but that doesn't seem to be legal.

  Read the article

• Linked Measure Groups and Local Dimensions

  - by ekoner

  Mulling over something I've been reading up on. According to Chris Webb, A linked measure group can only be used with dimensions from the same database as the source measure group. So I took this to mean as long as two cubes share a database, a linked measure group can be used with a dimension. So I created a new cube and added a local measure group, a local dimension and a linked measure group. However, I can't create a relationship between the linked measure group and the local dimension even though they are within the same database. I get the message below: Regular relationships in the current database between non-linked (local) dimensions and linked measure groups cannot be edited. These relationship can only be created through the wizard. This dialog can be used to delete these relationships. I see that I can go to the original cube and add the dimension there, but does the message below mean I have an alternative? I just know it's going to be something simple and trivial! Thanks for reading.

  Read the article

• Login with Kohana auth module - what am I doing wrong?

  - by keithjgrant

  I'm trying to login with the following controller action, but my login attempt keeps failing (I get the 'invalid username and/or password' message). What am I doing wrong? I also tried the other method given in the examples in the auth documentation, Auth::instance()->login($user->username, $form->password);, but I get the same result. Kohana version is 2.3.4. public function login() { $auth = Auth::instance(); if ($auth->logged_in()) { url::redirect('/account/summary'); } $view = new View('login'); $view->username = ''; $view->password = ''; $post = $this->input->post(); $form = new Validation($post); $form->pre_filter('trim', 'username') ->pre_filter('trim', 'password') ->add_rules('username', 'required'); $failed = false; if (!empty($post) && $form->validate()) { $login = array( 'username' => $form->username, 'password' => $form->password, ); if (ORM::factory('user')->login($login)) { url::redirect('/accounts/summary'); } else { $view->username = $form->username; $view->message = in_array('required', $form->errors()) ? 'Username and password are required.' : 'Invalid username and/or password.'; } } $view->render(true); }

  Read the article

• Posting status via Facebook's graph api

  - by Simon R

  In PHP, I am trying to post a status to our Facebook fan page using the graph api, despite following the intructions facebook give, the following code does not seem to update the status. Here is the code; $xPost['access_token'] = "{key}"; $xPost['message'] = "Posting a message test."; $ch = curl_init('https://graph.facebook.com/{page_id}/feed'); curl_setopt($ch, CURLOPT_VERBOSE, 1); curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); curl_setopt($ch, CURLOPT_HEADER, 1); curl_setopt($ch, CURLOPT_TIMEOUT, 120); curl_setopt($ch, CURLOPT_POST, 1); curl_setopt($ch, CURLOPT_POSTFIELDS, $xPost); curl_setopt($ch, CURLOPT_SSL_VERIFYHOST, 1); curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, 1); curl_setopt($ch, CURLOPT_CAINFO, NULL); curl_setopt($ch, CURLOPT_CAPATH, NULL); curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 0); $result = curl_exec($ch); Does anyone know why this code is not working? The access_token is correct.

  Read the article

• How to determine which class has called a function

  - by dannyc

  Hi, I am working on a Flex Front End at the moment, and have been using the Parsley framework for passing messages/events around. I was wondering if there is a simple way for a function (in this case, an event's constructor) to obtain a reference to the object which called it? This is to ensure that a certain event that I am defining can only be dispatched by one specified class. My thinking is to check the caller of the constructor somehow, and throw an error if it is not of the correct type. I am open to suggestions of alternative approaches here, but I would ideally like to stick to using the Parsley 'MessageHandler' approach if at all possible. Thanks for reading guys..

  Read the article

• Uploading to S3 using Curl

  - by Carl Crawley

  Hi All, I'm currently using cURL to upload a file from my server to S3 using AJAX to call the script. So I have the following: $fullfilepath = '/server/sitepath/files/' . $_POST['file']; $upload_url = 'https://'.$_POST['buckets'].'.s3.amazonaws.com/'; $params = array( 'key'=>$_POST['key'], 'AWSAccessKeyId'=>$_POST['AWSAccessKeyId'], 'acl'=>$_POST['acl'], 'success_action_status'=>$_POST['success_action_status'], 'policy'=>$_POST['policy'], 'signature'=>$_POST['signature'], 'Content-Type'=>$_POST['Content-Type'], 'file'=>"@$fullfilepath" ); $ch = curl_init(); curl_setopt($ch, CURLOPT_VERBOSE, 1); curl_setopt($ch, CURLOPT_URL, $upload_url); curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); curl_setopt($ch, CURLOPT_POSTFIELDS, $params); $response = curl_exec($ch); curl_close($ch); echo $response; However, I'm getting an S3 error as follows when it posts and I'm unsure why because I'm not passing JSON to it. <?xml version="1.0" encoding="UTF-8"?> <Error><Code>InvalidPolicyDocument</Code><Message>Invalid Policy: Invalid JSON.</Message><RequestId>B29469C6151BE0E8</RequestId><HostId>BFPk6W2kt1b6hTtx0mEq6dWdN/IhO0gNR5bct//7LAOwJxm1C3PrxS4RPv1blzJ8</HostId></Error> I've googled it for the last hour or so and can't seem to figure it out. If I change the order of the Array fields, it gives me a different error - I believe the order of the posted fields is important somehow. any help would be much appreciated! C

  Read the article

• Android Custom Dialog Class Title Problems

  - by y ramesh rao

  public class MessageDisplayDialog extends Dialog implements OnClickListener { public MessageDisplayDialog(Context context, String title, String message) { super(context); setTitle(title); getWindow().setFeatureInt(Window.FEATURE_CUSTOM_TITLE, R.color.default_text_color); Log.v(getClass().getSimpleName(), "MessageDisplayDialog"); LinearLayout objLinearLayout = new LinearLayout(context); LinearLayout objButtonLayout = new LinearLayout(context); TextView objMesaageView = new TextView(context); objMesaageView.setText(message); objMesaageView.setTextColor(Color.WHITE); objMesaageView.setGravity(Gravity.CENTER_HORIZONTAL); objMesaageView.setPadding(0, 0, 0, 10); Button okButton = new Button(context); okButton.setText(" OK "); okButton.setOnClickListener(this); okButton.setWidth(100); objButtonLayout.addView(okButton); objButtonLayout.setGravity(Gravity.CENTER_HORIZONTAL); objButtonLayout.setPadding(0, 5, 0, 0); objButtonLayout.setBackgroundColor(Color.LTGRAY); objLinearLayout.setOrientation(LinearLayout.VERTICAL); objLinearLayout.addView(objMesaageView); objLinearLayout.addView(objButtonLayout); setContentView(objLinearLayout); //LayoutParams param = new LayoutParams(LayoutParams.WRAP_CONTENT, LayoutParams.WRAP_CONTENT); //this.addContentView(objLinearLayout, param); } public void onClick(View v) { this.dismiss(); } } But the Dialog is not showing bar below the Title, how to crack it.

  Read the article

• Win32 DLL importing issues (DllMain)

  - by brady

  I have a native DLL that is a plug-in to a different application (one that I have essentially zero control of). Everything works just great until I link with an additional .lib file (links my DLL to another DLL named ABQSMABasCoreUtils.dll). This file contains some additional API from the parent application that I would like to utilize. I haven't even written any code to use any of the functions exported but just linking in this new DLL is causing problems. Specifically I get the following error when I attempt to run the program: The application failed to initialize properly (0xc0000025). Clock on OK to terminate the application. I believe I have read somewhere that this is typically due to a DllMain function returning FALSE. Also, the following message is written to the standard output: ERROR: Memory allocation attempted before component initialization I am almost 100% sure this error message is coming from the application and is not some type of Windows error. Looking into this a little more (aka flailing around and flipping every switch I know of) I linked with /MAP turned on and found this in the resulting .map file: 0001:000af220 ??3@YAXPEAX@Z 00000001800b0220 f ABQSMABasCoreUtils_import:ABQSMABasCoreUtils.dll 0001:000af226 ??2@YAPEAX_K@Z 00000001800b0226 f ABQSMABasCoreUtils_import:ABQSMABasCoreUtils.dll 0001:000af22c ??_U@YAPEAX_K@Z 00000001800b022c f ABQSMABasCoreUtils_import:ABQSMABasCoreUtils.dll 0001:000af232 ??_V@YAXPEAX@Z 00000001800b0232 f ABQSMABasCoreUtils_import:ABQSMABasCoreUtils.dll If I undecorate those names using "undname" they give the following (same order): void __cdecl operator delete(void * __ptr64) void * __ptr64 __cdecl operator new(unsigned __int64) void * __ptr64 __cdecl operator new[](unsigned __int64) void __cdecl operator delete[](void * __ptr64) I am not sure I understand how anything from ABQSMABasCoreUtils.dll can exist within this .map file or why my DLL is even attempting to load ABQSMABasCoreUtils.dll if I don't have any code that references this DLL. Can anyone help me put this information together and find out why this isn't working? For what it's worth I have confirmed via "dumpbin" that the parent application imports the same DLL (ABQSMABasCoreUtils.dll), so it is being loaded no matter what. I have also tried delay loading this DLL in my DLL but that did not change the results.

  Read the article

• Do I need Response.End() in ASP.Net 2.0

  - by Hamish Grubijan

  Hi, I am just starting with ASP.Net. I copied a ex-co-worker's code (from .Net 1.1 era) and it has a Response.End(); in case of an error. There is also a: catch (Exception ex) { Response.Write(ex.Message); Response.End(); } at the end of Page_Load(object sender, System.EventArgs e) which always appends "Thread was aborted." or something like that at the end. I suspect that this worked differently before, or the error conditions were not tested very well. Anyhow, I was able to stop using Response.End(); in case when I do not like the GET parameters, and use return; instead. It seemed to do the right think in a simple case. Is this Ok in general? There are some problems with the code I copied, but I do not want to do a rewrite; I just want to get it running first and find wrinkles later. The Response.End(); caused a mental block for me, however, so I want to figure it out. I want to keep the catch all clause just in case, at least for now. I could also end the method with: catch (System.Threading.ThreadAbortException) { Response.End(); } catch (Exception ex) { Response.Write(ex.Message); Response.End(); } but that just seems extremely stupid, once you think about all of the exceptions being generated. Please give me a few words of wisdom. Feel free to ask if something is not clear. Thanks! P.S. Ex-coworker was not fired and is a good coder - one more reason to reuse his example.

  Read the article

• Help converting code using httlib2 to use urllib2

  - by ThinkCode

  What am I trying to do? Visit a site, retrieve cookie, visit the next page by sending in the cookie info. It all works but httplib2 is giving me one too many problems with socks proxy on one site. http = httplib2.Http() main_url = 'http://mywebsite.com/get.aspx?id='+ id +'&rows=25' response, content = http.request(main_url, 'GET', headers=headers) main_cookie = response['set-cookie'] referer = 'http://google.com' headers = {'Content-type': 'application/x-www-form-urlencoded', 'Cookie': main_cookie, 'User-Agent' : USER_AGENT, 'Referer' : referer} How to do the same exact thing using urllib2 (cookie retrieving, passing to the next page on the same site)? Thank you.

  Read the article

• Best practices for querying an entire row in a database table? (MySQL / CodeIgniter)

  - by Walker

  Sorry for the novice question! I have a table called cities in which I have fields called id, name, xpos, ypos. I'm trying to use the data from each row to set a div's position and name. What I'm wondering is what's the best practice for dynamically querying an unknown amount of rows (I don't know how many cities there might be, I want to pull the information from all of them) and then passing the variables from the model into the view and then setting attributes with it? Right now I've 'hacked' a solution where I run a different function each time which pulls a value using a query ('SELECT id FROM cities;'), then I store that in a global array variable and pass it into view. I do this for each var so I have arrays called: city_idVar, city_nameVar, city_xposVar, city_yposVar then I know that the city_nameVar[0] matches up with city_xposVar[0] etc. Is there a better way?

  Read the article

• ADO.NET parameters from TextBox

  - by Geo Ego

  I'm trying to call a parameterized stored procedure from SQL Server 2005 in my C# Winforms app. I add the parameters from TextBoxeslike so (there are 88 of them): cmd.Parameters.Add("@CustomerName", SqlDbType.VarChar, 100).Value = CustomerName.Text; I get the following exception: "System.InvalidCastException: Failed to convert parameter value from a TextBox to a String. ---> System.InvalidCastException: Object must implement IConvertible." The line throwing the error is when I call the query: cmd.ExecuteNonQuery(); I also tried using the .ToString() method on the TextBoxes, which seemed pointless anyway, and threw the same error. Am I passing the parameters incorrectly?

  Read the article

• Concurrent WCF calls via shared channel

  - by Kent Boogaart

  I have a web tier that forwards calls onto an application tier. The web tier uses a shared, cached channel to do so. The application tier services in question are stateless and have concurrency enabled. But they are not being called concurrently. If I alter the web tier to create a new channel on every call, then I do get concurrent calls onto the application tier. But I wanted to avoid that cost since it is functionally unnecessary for my scenario. I have no session state, and nor do I need to re-authenticate the caller each time. I understand that the creation of the channel factory is far more expensive than than the creation of the channels, but it is still a cost I'd like to avoid if possible. I found this article on MSDN that states: While channels and clients created by the channels are thread-safe, they might not support writing more than one message to the wire concurrently. If you are sending large messages, particularly if streaming, the send operation might block waiting for another send to complete. Firstly, I'm not sending large messages (just a lot of small ones since I'm doing load testing) but am still seeing the blocking behavior. Secondly, this is rather open-ended and unhelpful documentation. It says they "might not" support writing more than one message but doesn't explain the scenarios under which they would support concurrent messages. Can anyone shed some light on this?

  Read the article

• Facebook Open Graph - post to all approved users feeds.

  - by simnom

  Hi, I'm struggling to get to grips with posting a feed item to all the members of an approved application. Within the application settings for the user it is stating that the application has permission to post to the wall but I can only achieve this if that user is currently logged in to facebook. Obviously I would like this to function so that any items I uploaded are posted to all the members of the application at any one time. I am using the Facebook PHP SDK from http://github.com/facebook/php-sdk/ and currrently my code is as follows: require 'src/facebook.php'; //Generates access token for this transaction $accessToken = file_get_contents("https://graph.facebook.com/oauth/access_token?type=client_cred&client_id=MyAppId&client_secret=MySecret"); //Gets the full user details as an object $contents = json_decode(file_get_contents("https://graph.facebook.com/SomeUserId?scope=publish_stream&" . $accessToken)); print_r($contents); if ($facebook->api('/' . $contents->id . '/feed', 'POST', array( 'title' => 'New and Improved, etc - 12/03/2010', 'link' => 'http://www.ib3.co.uk/news/2010/03/12/new-and-improved--etc', 'picture' => 'http://www.ib3.co.uk/userfiles/image/etc-booking.jpg', 'scope' => 'publish_stream' ) )==TRUE) { echo "message posted"; } else { echo "message failed"; } The output from $contents shows the expected user details but nothing relating to the permissions for my application. Am I missing a trick here? Then using the $facebook-api() function I am receiving a #200 - Permissions error. The application does not have permission to perform this action. This is driving me a little potty as I suspect I'm missing something straightforward with the authorisation but what? Many thanks in advance for an assistance offered.

  Read the article

• mySQL not saving data?

  - by tony noriega

  i have a PHP contact form that submits data, and an email...: <?php $dbh=mysql_connect ("localhost", "username", "password") or die ('I cannot connect to the database because: ' . mysql_error()); mysql_select_db ("guest"); if (isset($_POST['submit'])) { if (!$_POST['name'] | !$_POST['email']) { echo"<div class='error'>Error<br />Please provide your Name and Email Address so we may properly contact you.</div>"; } else { $age = $_POST['age']; $name = $_POST['name']; $gender = $_POST['gender']; $email = $_POST['email']; $phone = $_POST['phone']; $comments = $_POST['comments']; $query = "INSERT INTO contact_us (age,name,gender,email,phone,comments) VALUES ('$age','$name','$gender','$email','$phone','$comments')"; mysql_query($query); mysql_close(); $yoursite = "Mysite "; $youremail = $email; $subject = "Website Guest Contact Us Form"; $message = "$name would like you to contact them Contact PH: $phone Email: $email Age: $age Gender: $gender Comments: $comments"; $email2 = "[email protected]"; mail($email2, $subject, $message, "From: $email"); echo"<div class='thankyou'>Thank you for contacting us,<br /> we will respond as soon as we can.</div>"; } } ?> The email is coming through fine, but the data is not storing the dbase... am i missing something? Its the same script as i use on another contact us page, only difference is instead of parsing the data on teh same page, i now send this data to a "thankyou.php" page... i tried changing $_POST to $_GET but that killed the page... what am i doing wrong?

  Read the article

• 'Stack level too deep' error in engine-like plugin with globalize

  - by nutsmuggler

  Hello folks. I have built an engine-like plugin thanks to the new features of Rails 2.3. It's a 'Product' module for a CMS, extrapolated from a previously existing (and working) model/controller. The plugin relies on easy_fckeditor and on globalize (description and title field are localised), and I suspect that globalized could be the culprit here... Everything works fine, except for the update action. I get the following error message: (posting just the first lines, all the message is about attribute_methods) stack level too deep /Library/Ruby/Gems/1.8/gems/activerecord-2.3.2/lib/active_record/attribute_methods.rb:64:in `generated_methods?' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.2/lib/active_record/attribute_methods.rb:241:in `method_missing' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.2/lib/active_record/attribute_methods.rb:249:in `method_missing' For referenze, the full error stack is here: http://pastie.org/596546 I've tried to debug eliminating all the input fields, one by one, but I keep getting the error. fckeditor doesn't seem the culprit (error even without fckeditor) This is the action: def update params[:product][:term_ids] ||= [] @product = Product.find(params[:id]) respond_to do |format| if @product.update_attributes(params[:product]) flash[:notice] = t(:Product_was_successfully_updated) format.html { redirect_to products_path } format.xml { head :ok } else format.html { render :action => "edit" } format.xml { render :xml => @product.errors, :status => :unprocessable_entity } end end end As you see it's quite straightforward. Of course I am not hoping someone to solve this question straightaway, I'd just like to have a head up, a suggestion about where to look to solve this issue. Thanks in advance, Davide

  Read the article

• facebook javascript api

  - by ngreenwood6

  I am trying to get my status from facebook using the javascript api. I have the following code: <div id="fb-root"></div> <div id="data"></div> <script src="http://connect.facebook.net/en_US/all.js"></script> <script type="text/javascript"> (function(){ FB.init({ appId : 'SOME ID', status : true, // check login status cookie : true, // enable cookies to allow the server to access the session xfbml : true // parse XFBML }); }); getData(); function getData(){ var query = FB.Data.query('SELECT message FROM status WHERE uid=12345 LIMIT 10'); query.wait(function(rows) { for(i=0;i<rows.length;i++){ document.getElementById('data').innerHTML += 'Your status is ' + rows[i].message + '<br />'; } }); } </script> When i try to get my name it works fine but the status is not working. Can someone please tell me what I am doing wrong because the documentation for this is horrible. And yes I replaced the uid with a fake one and yes i put in my app id because like i said when i try to get my name it works fine. Any help is appreciated.

  Read the article

• PHP: Exception not caught by try ... catch

  - by Christian Brenner

  I currently am working on an autoloader class for one of my projects. Below is the code for the controller library: public static function includeFileContainingClass($classname) { $classname_rectified = str_replace(__NAMESPACE__.'\\', '', $classname); $controller_path = ENVIRONMENT_DIRECTROY_CONTROLLERS.strtolower($classname_rectified).'.controller.php'; if (file_exists($controller_path)) { include $controller_path; return true; } else { // TODO: Implement gettext('MSG_FILE_CONTROLLER_NOTFOUND') throw new Exception('File '.strtolower($classname_rectified).'.controller.php not found.'); return false; } } And here's the code of the file I try to invoke the autoloader on: try { spl_autoload_register(__NAMESPACE__.'\\Controller::includeFileContainingClass'); } catch (Exception $malfunction) { die($malfunction->getMessage()); } // TESTING ONLY $test = new Testing(); When I try to force a malfunction, I get the following message: Fatal error: Uncaught exception 'Exception' with message 'File testing.controller.php not found.' in D:\cerophine-0.0.1-alpha1\application\libraries\controller.library.php:51 Stack trace: #0 [internal function]: application\Controller::includeFileContainingClass('application\Tes...') #1 D:\cerophine-0.0.1-alpha1\index.php(58): spl_autoload_call('application\Tes...') #2 {main} thrown in D:\cerophine-0.0.1-alpha1\application\libraries\controller.library.php on line 51 What seems to be wrong?

  Read the article

• Where do I input a piece of code in Emacs?

  - by Vivi

  Hi there, I have just started using Emacs for the specific purpose of editing latex documents. I was attracted to Emacs because I want to be able to customize syntax highlighting even to the point of defining the colors of specific words. I am new to Emacs and not a programmer, so I having an extreme difficulty in doing what I want to do because most help I find assume too much knowledge for my level (it took me days just to be able to install emacs + auctex and change the first face color). I found something that I think will help me but I don't know how to do it. The post below is what I want to do, but what I am supposed to do with this code? Where should I insert it or where should I type it? I am using GNU Emacs in Windows. Thank you so much for you help :) M-x what-face will print the face found at the current point. And the code for that is: (defun what-face (pos) (interactive "d") (let ((face (or (get-char-property (point) 'read-face-name) (get-char-property (point) 'face)))) (if face (message "Face: %s" face) (message "No face at %d" pos)))) By the way, I found this in another post that can be found here: http://stackoverflow.com/questions/1242352/get-font-face-under-cursor-in-emacs

  Read the article

• I can't figure out why this fps counter is inaccurate.

  - by rmetzger

  I'm trying to track frames per second in my game. I don't want the fps to show as an average. I want to see how the frame rate is affected when I push keys and add models etc. So I am using a variable to store the current time and previous time, and when they differ by 1 second, then I update the fps. My problem is that it is showing around 33fps but when I move the mouse around really fast, the fps jumps up to 49fps. Other times, if I change a simple line of code elsewhere not related to the frame counter, or close the project and open it later, the fps will be around 60. Vsync is on so I can't tell if the mouse is still effecting the fps. Here is my code which is in an update function that happens every frame: FrameCount++; currentTime = timeGetTime (); static unsigned long prevTime = currentTime; TimeDelta = (currentTime - prevTime) / 1000; if (TimeDelta > 1.0f) { fps = FrameCount / TimeDelta; prevTime = currentTime; FrameCount = 0; TimeDelta = 0; } Here are the variable declarations: int FrameCount; double fps, currentTime, prevTime, TimeDelta, TimeElapsed; Please let me know what is wrong here and how to fix it, or if you have a better way to count fps. Thanks!!!!!! I am using DirectX 9 btw but I doubt that is relevant, and I am using PeekMessage. Should I be using an if else statement instead? Here is my message processing loop: MSG msg; ZeroMemory (&msg, sizeof (MSG)); while (msg.message != WM_QUIT) { if (PeekMessage(&msg, NULL, 0, 0, PM_REMOVE)) { TranslateMessage (&msg); DispatchMessage (&msg); } Update (); RenderFrame (); }

  Read the article

• Best and simple way to handle JSON in Django

  - by primal

  Hi, As part of the application we are developing (with android client and Django server) a json object which contains user name and pass word is sent to server from android client as follows HttpPost post = new HttpPost(URL); /*Adding key value pairs */ json.put("username", un); json.put("password", pwd); StringEntity se = new StringEntity(json.toString()); post.setEntity(se); response = client.execute(post); The response is parsed like this result = responsetoString(response.getEntity().getContent()); //Converts response to String jObject = new JSONObject(result); JSONObject post = jObject.getJSONObject("post"); username = post.getString("username"); message = post.getString("message"); Hope upto this everything is fine. The problem comes when parsing or sending JSON responses in Django server. Whats the best way to do this? We tried using SimpleJSON and it turned out not to be so simple as we didn't find any good tutorials or sample code for the same? Are there any python functions similiar to get,put and opt in java for JSON? Any help would be much appreciated..

  Read the article

• NoClassDefFoundError without any class name

  - by Safder

  Hello, I am trying to run a java task from ant. I am trying to run the "org.apache.tools.ant.launch.Launcher" class. I keep on getting the "NoClassDefFoundError" without any class name being specified. I am also getting a "ClassNotFoundException" along with that displaying a message "Could not find the main class: . Program will exit". Here's a snippet of the error [java] Exception in thread "main" java.lang.NoClassDefFoundError: [java] Caused by: java.lang.ClassNotFoundException: [java] at java.net.URLClassLoader$1.run(URLClassLoader.java:200) [java] at java.security.AccessController.doPrivileged(Native Method) [java] at java.net.URLClassLoader.findClass(URLClassLoader.java:188) [java] at java.lang.ClassLoader.loadClass(ClassLoader.java:307) [java] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301) [java] at java.lang.ClassLoader.loadClass(ClassLoader.java:252) [java] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320) [java] Could not find the main class: . Program will exit. [java] Java Result: 1 Now I am trying to run an ant class from an ant jar and i specifiy the classpath where this class file resides using the "classpathref" attribute, however I still get this message. I checked the ant jar to check the Manifest and the "main" class is specified properly (it's "org.apache.tools.ant.launch.Launcher") . I have exhausted all my resources. Please help ! ! ! ps: My environment is Eclipse on Ubuntu 9.04

  Read the article

• sending email with codeigniter

  - by Maru

  I have this MODEL and I get the email which I want to send class Cliente_Model extends CI_Model{ public function getInfo($id){ $this->db->select('*'); $this->db->from('pendientes'); $query = $this->db->get(); if($query->num_rows() > 0) { foreach ($query->result_array() as $row) { return $row['email']; } } else { return FALSE; } } } CONTROLLER $this->load->model('cliente_model', 'client'); $clientInfo = $this->client->getInfo($id); $this->email->from('[email protected]', 'Demo'); $this->email->to($clientInfo); $this->email->subject('Email Test'); $this->email->message('your user is '.$clientInfo.' and your password is '.$clave); $this->email->send(); and I need some help here, I can get the email and it can send it perfectly but in the message I need to send the password also and I don't know how I can get it from the model. thanks in advance!

  Read the article

• Why do we use HTTP and not remote invocations?

  - by BrokenClockwork

  Hey, first of all this is a conceptional question and I do not know if StackOverflow is the appropriate place - so my apologies if I am wrong. Nowadays the web is not only used for passing raw informations. Many and especially complex web applications are in use. These web application seem to be so complex that it seems irrational to use the HTTP protocol, which is based on so simple data exchange, plus it is stateless. Would it not be more convincing to use remote invocations for this web applications? The big advantage to my mind is a unified GUI by using HTML. But there are applications, which have no need for a graphical interfaces and then it comes to a point where the HTTP protocol is really cumbersome.

  Read the article

< Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >