Search Results

Search found 11675 results on 467 pages for 'parallel testing'.

Page 364/467 | < Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >

• Multicast hostname lookups on OSX

  - by KARASZI István

  I have a problem with hostname lookups on my OSX computer. According to Apple's HK3473 document it says for v10.6: Host names that contain only one label in addition to local, for example "My-Computer.local", are resolved using Multicast DNS (Bonjour) by default. Host names that contain two or more labels in addition to local, for example "server.domain.local", are resolved using a DNS server by default. Which is not true as my testing. If I try to open a connection on my local computer to a remote port: telnet example.domain.local 22 then it will lookup the IP address with multicast DNS next to the A and AAAA lookups. This causes a two seconds lookup timeout on every lookup. Which is a lot! When I try with IPv4 only then it won't use the multicast queries to fetch the remote address just the simple A queries. telnet -4 example.domain.local 22 When I try with IPv6 only: telnet -6 example.domain.local 22 then it will lookup with multicast DNS and AAAA again, and the 2 seconds timeout delay occurs again. I've tried to create a resolver entry to my /etc/resolver/domain.local, and /etc/resolver/local.1, but none of them was working. Is there any way to disable this multicast lookups for the "two or more label addition to local" domains, or simply disable it for the selected subdomain (domain.local)? Thank you!

  Read the article

• Auto-rebuild RAID6 with MDADM

  - by user65632

  Hello everybody, i'm new in this forum, and because I see that a lot of people get helped here, i'll ask my question here! I have a openSUSE 11.3 Linux computer with 5 disks of 1TB (WD enterprise disks) in it. with mdadm I configured an RAID6 device. Now, after a lot of thorough testing, i've noticed that when the computer goes down unsuspectedly it could happen (1 time out of 10) that while booting, the md0 device isn't recognised, and then the machine goes in "recovery mode", which means that i have to 'CTRL + C' it so it can boot to openSUSE. Once in openSUSE i have to readd the drive manually with 'mdadm /dev/md0 --add /dev/sdX'. After this everything works back fine (after resynching). So my question is: Is there a way to auto-rebuild the RAID6 device when there are problems? and how can I stop this "recovery mode" from happening. Because the computer will be in a place I can't go to, to connect a keyboard, 'CTRL + C' it just to get in openSUSE. If you could help me, I would be a very very very! happy man! :-) thanks in advance! Mikhail

  Read the article

• How to find the real IP to which IPVS is routing a virtual IP

  - by Wayne Conrad

  I'm trying to find a problem server hiding behind a virtual IP (using LVS/ipvs). I've got a test program that sends requests to the virtual IP until it gets the bad response, but how can I tell to which real IP a request to the virtual IP got routed? On the box doing the virtual IP magic, here's the virtual IP configuration (for the service I care about): IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn ... TCP 10.1.0.254:5025 nq -> 10.1.0.5:5025 Route 1 0 1 -> 10.1.0.6:5025 Route 1 0 5 -> 10.1.0.7:5025 Route 1 0 2 -> 10.1.0.9:5025 Local 1 0 3 -> 10.1.0.11:5025 Route 1 0 3 ... My client program is sending TCP requests to 10.1.0.254:5025, usually getting a good response but sometimes a bad response. With this few servers, I could send my request to each server in turn until I discover the culprit, but I wonder if that technique will scale as we add servers. What means exist for me to find out where requests got routed? Kernel: Linux 2.6.32 OS: Debian testing (whatever that's called these days). ipvsadm is version 1.25, compiled with ipvs v1.2.1

  Read the article

• Linux/Unix in Windows

  - by Dmitriy Nagirnyak

  Hi, What would be the best way to get the full-blown Unix/Linux bash inside Windows? I don't mean the Virtual Machine, but rather only the terminal with mounted NTFS drives. This way I could use the power of Unix/Linux still being on Windows. The things I want to be able to do from the terminal: Package management (apt-get in Debian). SSH. File operations (including grub and similar). Run a web server (Apache, nginx) for testing purposes. Easy to use: start terminal - Linux is on, end terminal - Linux is shut down. Would be nice to be able to copy-paste from Windows into Terminal and vice versa. This really feels like a separate OS and I realize that VM would, probably, be the best thing. But I guess it should be possible to have a lighter installation. THE NOTE: I cannot just use Linux because of I still need to do development on Windows. Also I am a Linux noobie - just getting started with it so sorry if asking something obvious/stupid. Thanks, Dmitriy.

  Read the article

• Proper way to use hiera with puppetlabs-spec-helper?

  - by Lee Lowder

  I am trying to write some rspec tests for my modules. Most of them now use hiera. I have a .fixures.yml: fixtures: repositories: stdlib: https://github.com/puppetlabs/puppetlabs-stdlib.git hiera-puppet: https://github.com/puppetlabs/hiera-puppet.git symlinks: mongodb: "#{source_dir}" and a spec/classes/mongodb_spec.rb: require 'spec_helper' describe 'mongodb', :type => 'class' do context "On an Ubuntu install, admin and single user" do let :facts do { :osfamily => 'Debian', :operatingsystem => 'Ubuntu', :operatingsystemrelease => '12.04' } end it { should contain_user('XXXX').with( { 'uid' => '***' } ) should contain_group('XXXX').with( { 'gid' => '***' } ) should contain_package('mongodb').with( { 'name' => 'mongodb' } ) should contain_service('mongodb').with( { 'name' => 'mongodb' } ) } end end but when I run the spec test, I get: # rake spec /usr/bin/ruby1.8 -S rspec spec/classes/mongodb_spec.rb --color F Failures: 1) mongodb On an Ubuntu install, admin and single user Failure/Error: should contain_user('XXXX').with( { 'uid' => '***' } ) LoadError: no such file to load -- hiera_puppet # ./spec/fixtures/modules/hiera-puppet/lib/puppet/parser/functions/hiera.rb:3:in `function_hiera' # ./spec/classes/mongodb_spec.rb:15 Finished in 0.05415 seconds 1 example, 1 failure Failed examples: rspec ./spec/classes/mongodb_spec.rb:14 # mongodb On an Ubuntu install, admin and single user rake aborted! /usr/bin/ruby1.8 -S rspec spec/classes/mongodb_spec.rb --color failed Tasks: TOP => spec_standalone (See full trace by running task with --trace) Module spec testing is relatively new, as is hiera. So far I have been unable to find any suitable solutions. (the back and forth on puppet-dev was interesting, but not helpful). What changes do I need to make to get this to work? Installing puppet from a gem and hacking on rubylib isn't a viable solution due to corporate policy. I am using Ubuntu 12.04 LTS + Puppet 2.7.17 + hiera 0.3.0.

  Read the article

• Booting Debian5 (Lenny) on 2.6.16 Kernel

  - by bk

  Due to a proprietary kernel module that I don't have the source to and is very picky about what kernel versions it will load into (even with modprobe --f), I find myself in need of running a 2.6.16.XX kernel on my Debian5 machine. The machine boots fine with the 2.6.26-2 stock kernel, and I have successfully build and booted 2.6.26 and 2.6.31 based kernels by making a .deb and the ndoing dpkg -i. However, when I do the same approach for 2.6.16, the kernel hangs at boot. I'm testing this in a VMWare image, so I don't think its an issue of newer hardware not supported by the older kernel. For a working kernel, at boot I get: Uncompressing Linux.. OK booting the kernel Loading, please wait... mdadm: No devices listed in the conf file were found kinit name_to_dev_t /dev/hda5 (dev5,3) ... With 2.6.16.60, I never get the kinit message. It hangs after the mdadm line. There are no mdadm arrays on this machine, so I doubt its an issue inside the mdadm stuff, which is supposed to just error out as it does in the 2.6.26 case above, but for some reason I'm getting stuck getting into kinit. I've been banging my head against this wall so I'm very open to suggestions on how to go about troubleshooting this.

  Read the article

• Simulated NAT Traversal on Virtual Box

  - by Sumit Arora

  I have installed virtual box ( with Two virtual Adapters(NAT-type)) - Host (Ubuntu -10.10) - Guest-Opensuse-11.4 . Objective : Trying to simulate all four types of NAT as defined here : https://wiki.asterisk.org/wiki/display/TOP/NAT+Traversal+Testing Simulating the various kinds of NATs can be done using Linux iptables. In these examples, eth0 is the private network and eth1 is the public network. Full-cone iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to-source iptables -t nat -A PREROUTING -i eth0 -j DNAT --to-destination Restricted cone iptables -t nat POSTROUTING -o eth1 -p tcp -j SNAT --to-source iptables -t nat POSTROUTING -o eth1 -p udp -j SNAT --to-source iptables -t nat PREROUTING -i eth1 -p tcp -j DNAT --to-destination iptables -t nat PREROUTING -i eth1 -p udp -j DNAT --to-destination iptables -A INPUT -i eth1 -p tcp -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -i eth1 -p udp -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -i eth1 -p tcp -m state --state NEW -j DROP iptables -A INPUT -i eth1 -p udp -m state --state NEW -j DROP Port-restricted cone iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to-source Symmentric echo "1" /proc/sys/net/ipv4/ip_forward iptables --flush iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE --random iptables -A FORWARD -i eth1 -o eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT What I did : OpenSuse guest with Two Virtual adapters - eth0 and eth1 -- eth1 with address 10.0.3.15 /eth1:1 as 10.0.3.16 -- eth0 with address 10.0.2.15 now running stund(http://sourceforge.net/projects/stun/) client/server : Server eKimchi@linux-6j9k:~/sw/stun/stund ./server -v -h 10.0.3.15 -a 10.0.3.16 Client eKimchi@linux-6j9k:~/sw/stun/stund ./client -v 10.0.3.15 -i 10.0.2.15 On all Four Cases It is giving same results : test I = 1 test II = 1 test III = 1 test I(2) = 1 is nat = 0 mapped IP same = 1 hairpin = 1 preserver port = 1 Primary: Open Return value is 0x000001 Q-1 :Please let me know If any has ever done, It should behave like NAT as per description but nowhere it working as a NAT. Q-2: How NAT Implemented in Home routers (Usually Port Restricted), but those also pre-configured iptables rules and tuned Linux

  Read the article

• How do i set up a fully featured small business network?

  - by JoshReedSchramm

  This has the possibility to be a very large question but I recently acquired a few rack mount servers and the hardware necessary to run them. Unfortunately I'm a programmer with very little understanding of how to set up a good working network so I'm hoping someone on here might be able to help. What I want to do is run a domain with a series of subdomains which would all be externally accessible. The setup would live inside my home and my internet connection is your run of the mill cable model (which means a dynamic IP) I want to be able to set up a couple site, specifically: www.mycompany.com (mycompany.com with no subdomain would redirect to this) build.mycompany.com (for my continuous integration server) ruby.mycompany.com (for ruby projects) win.mycompany.com (for windows project) etc. Additionally this is still my home network so our personal machines need to be able to get on via wifi with at least the same security we have now through an out of the box router from best buy. I'm thinking i need a DNS server, DHCP server and one of those would run either no-ip or dyndns to accommodate the dynamic ip. I don't necessarily need mail but it might be helpful to have some sort of mail server i could use for testing, it doesn't need to get out to the greater internet though. So how do i set up this kinda of network? tl;dr Need to know how to set up your standard office style network in my home off my normal consumer level cable modem connection.

  Read the article

• Active Directory Child Domain Replication Problems

  - by MikeR

  Hi, I've recently inherited an Active Directory (all DCs Windows 2003) which has been configured with several child domains that are used as test environments for out CRM software. Two of these child domains have been used for testing using dates in the future (2015), throwing them well outside of the Kerberos tolerance for time, and they're flooding my event logs with replication errors such as the following: Description: The attempt to establish a replication link for the following writable directory partition failed. Directory partition: CN=Schema,CN=Configuration,DC=ad,DC=xxxxxxx,DC=com Source domain controller: CN=NTDS Settings,CN=TESTDC001,CN=Servers,CN=SiteName,CN=Sites,CN=Configuration,DC=ad,DC=xxxxxxx,DC=com Source domain controller address: 38e95b2a-35af-4174-84ba-9ab039528cce._msdcs.ad.xxxxxxx.com Intersite transport (if any): This domain controller will be unable to replicate with the source domain controller until this problem is corrected. User Action Verify if the source domain controller is accessible or network connectivity is available. Additional Data Error value: 5 Access is denied. I'd also like to upgrade to Windows 2008 at some point, but wouldn't want to attempt any schema updates while I'm not 100% confident on the replication. I'm guessing my only real solution will be to get rid of these child domains. The child domains are operating as stand alone domains, the DC is up and running and authenticating test users fine. I'm guessing the best solution to this would be to delete the domains (although I'd be happily told otherwise). The clock forwarding appears to have been happening for several years, so I'm assuming I can't just put the clock right (I'm guessing scope for this would be 180days, the same as the tombstone lifetime) With the replication errors would I be able to dcpromo the child domains DC, select it as the last domain controller in the domain and the child domain would be deleted? Or would I be better off treating the domain as an orphaned domain and use Microsoft's instructions to clear up as such. Any advice would be much appreciated.

  Read the article

• What does this error mean in my IIS7 Failed Request Tracing report?

  - by Pure.Krome

  Hi folks, when I attempt to goto any page in my web application (i'm migrating the code from an asp.net web site to web application, and now testing it) .. i keep getting some not authenticated error(s) . So, i've turned on FREB and this is what it says... I'm not sure what that means? Secondly, i've also made sure that my site (or at least the default document which has been setup to be default.aspx) has anonymous on and the rest off. Proof: - C:\Windows\System32\inetsrv>appcmd list config "My Web App/default.aspx" -section:anonymousAuthentication <system.webServer> <security> <authentication> <anonymousAuthentication enabled="true" userName="IUSR" /> </authentication> </security> </system.webServer> C:\Windows\System32\inetsrv>appcmd list config "My Web App" -section:anonymousAuthentication <system.webServer> <security> <authentication> <anonymousAuthentication enabled="true" userName="IUSR" /> </authentication> </security> </system.webServer> Can someone please help?

  Read the article

• Small Business HP Virtualisation and iSCSI SAN Options

  - by Robin Day

  We are a small business that hosts our core product on a number of HP servers. Our core production setup is 1x HP DL380, high powered for a SQL Server Database 1x HP DL360, mid powered for our core application server 6x HP DL320, low powered for our front ends We run our training / testing / support systems on a similar setup, the servers are just older and less powerful. Unfortunately this is now causing us issues as the system has grown beyond the capabilities of these older servers. Upgrading these servers would be expensive and we believe that virtualisation is probably the way to go for the future. Locally we run a number of test / dev environments on ESXi using Direct Storoage on a couple of high powered DL360's and these are performing fairly well. We're thinking that instead of replacing all of our test servers that we can implement an iSCSI SAN and one or two high powered hosts. Hopefully looking that when it comes to replace our live servers as well that we can just expand the virual environment to cope. So my question is... Can anyone offer any advice on some suitable options? We have generally always been extremely happy with HP servers, all of our kit is currently HP, therefore our preference would be to stick with HP, however, I'm always happy to hear about other options. I'm hoping that initially a budget of around 15-25k (GBP) would be suitable, this could potentially be increased if I had confidence that the system would pave the way for a cost effective upgrade of our live systems in the future as well. I am new to SAN's and my only real experience is playing with OpenFiler on some old desktops. I think iSCSI should be suitable, but I've not done any research into how SQL server may perform. I've had a browser through HP's sites and see plenty of information about EVA, MSA, LeftHand, etc. However, from looking at all that, I don't see which options would be best and more importantly I don't know exactly what I would need to buy. Any help, links, opinions would be much appreciated. Thanks

  Read the article

• Dovecot unable to perform mysql query

  - by NathanJ2012

  I have been following the ISPMail tutorials on workaround.org (the 2.9 Wheezy version) and thus far everything has been working fine. When I reached the step to "Testing email delivery" step I noticed a error about the query in the output log from /var/log/mail.log. May 14 06:48:59 mail postfix/pickup[17704]: EA4AD240A98: uid=0 from=<root> May 14 06:48:59 mail postfix/cleanup[17776]: EA4AD240A98: message-id=<[email protected]> May 14 06:48:59 mail postfix/qmgr[17706]: EA4AD240A98: from=<[email protected]>, size=429, nrcpt=1 (queue active) May 14 06:49:00 mail dovecot: auth-worker(17782): mysql(127.0.0.1): Connected to database mailserver May 14 06:49:00 mail dovecot: auth-worker(17782): Warning: mysql: Query failed, retrying: Table 'mailserver.users' doesn't exist May 14 06:49:00 mail dovecot: auth-worker(17782): Error: sql([email protected]): User query failed: Table 'mailserver.users' doesn't exist (using built-in default user_query: SELECT home, uid, gid FROM users WHERE username = '%n' AND domain = '%d') May 14 06:49:00 mail dovecot: lda([email protected]): msgid=<[email protected]>: saved mail to INBOX May 14 06:49:00 mail postfix/pipe[17780]: EA4AD240A98: to=<[email protected]>, relay=dovecot, delay=0.09, delays=0.03/0.01/0/0.06, dsn=2.0.0, status=sent (delivered via dovecot service) May 14 06:49:00 mail postfix/qmgr[17706]: EA4AD240A98: removed I found this rather interesting that it isn't finding the DB so I went back through and checked EVERY file that I touched that involved the DB (including the postfix cf files) and everything is correct so I am baffled at this point, but oddly enough it would seem the email still made it to the correct destination in /var/vmail/domain.com/. Should I be worried about this or am I missing something here? Since it is a message from dovecot it would be the query from dovecot-sql.conf.ext which I am including here driver = mysql connect = host=127.0.0.1 dbname=mailserver user=blocked password=***REMOVED*** default_pass_scheme = PLAIN-MD5 password_query = SELECT email as user, password FROM virtual_users WHERE email='%u';

  Read the article

• RDP problem with Vista and Windows 7 destination

  - by MadBison

  I use a server a home to host a bunch of concurrently running Hyper-V VM's with different OS's and software for testing. I have Vista on the laptop, all latest SP's and patches. The server is Server 2008 R2, fully patched. The guests are a mix of XP, Vista, Server 2008 and Windows 7. If I connect to the Win XP or Server 2008 guest using RDP, it is always good. Very quick, no speed issues. If I connect to the Vista or Win 7 guests, the response time is so slow it is unusable. Usually 6 or 8 seconds, and at times it is to long to measure! This happens from both the laptop running Vista, and the server running Server 2008 R2. Does anyone know what the issue is with RDP on Vista and Windows 7 destinations? I did read this: http://blog.tmcnet.com/blog/tom-keating/microsoft/remote-desktop-slow-problem-solved.asp and that is not the problem I have applied that change to all PC's.

  Read the article

• openSSL tutorial not fully working - Can sign but cannot restore original file

  - by djechelon

  I'm writing, and testing, a little tutorial for my groupmates involved in an openSSL homework. We have a bunch of PDF files, I'm the CA and each one should send me a signed PDF for me to be verified. I've told them to do the following (and tried to do it by myself) Request and obtain a certificate (I'll skip this part) Create a MIME message with the PDF file in it makemime -c "text/pdf" -a "Content-Disposition: attachment; filename=”Elaborato.pdf" Elaborato.pdf > Elaborato.pdf.msg Sign with openSSL openssl smime -sign -in Elaborato.pdf.msg -out Elaborato.pdf.p7m -certfile ca.pem -certfile nomegruppo.crt -inkey nomegruppo.key -signer nomegruppo.crt Verify with openssl smime -verify -in Elaborato.pdf.p7m -out Elaborato-verified.msg -CAfile ca.pem -signer nomegruppo.crt Extract attachment with munpack Elaborato-verified.msg View with Acrobat Reader The problem is that even if I get a file that (from its binary content) resembles a PDF file my current Ubuntu PDF viewer doesn't read it. The XXXElaborato.pdf extracted by munpack is a little bit smaller than the original. What's the problem with this procedure? In theory, they should send me the signed S/MIME message and I should be able to read the PDF within it. Why can't I restore the original content of the PDF file?

  Read the article

• Computer resetting semi-randomly

  - by Peter

  Hi, I'm having a problem with my desktop whereby it sometimes resets itself semi-randomly. For example, I'll switch it on, it'll boot an OS and shortly after getting to the desktop it will immediately reset with no warning. The time isn't consistent - sometimes it does it before reaching login. I'm pretty sure it's not an OS thing; have tried Ubuntu and a Windows install and both exhibit it. It also doesn't appear to be heat-related because sometimes it appears to be able to "get past" it and will then run stably even under load; if anything it seems to be worse from a cold start. My gut feeling is some kind of power issue but I'm clutching at straws a little. Any suggestions on how I could go about testing it or trying to narrow the problem down would be appreciated. The machine is four years old now so while I can replace components if needed, it's not worth enough that I'm comfortable buying new parts without being pretty confident that they'll fix the problem. Thanks in advance for any help :) Edit: Okay, the motherboard is a MSI K8N SLI; CPU is an Athlon64 X2 4200+. Has one video card, a GeForce 7800GT. 1GB RAM, not sure of brand; 3 hard drives, two SATA and one PATA. Flashed motherboard to latest BIOS some time ago. Edit the Second: I thought I'd narrowed it down to the PSU for a while, but then it recurred again. I ended up pulling everything out but CPU, RAM and motherboard and it still seems to be stuffed (if anything, it's gotten worse in the last couple of days). I assume it's one of those three components, but the machine is old enough that I don't really want to spend money replacing any of them. So thanks for everyone's suggestions; much appreciated!

  Read the article

• PHP crashing during oAuth scripts

  - by FunkyChicken

  I just installed Nginx 1.2.4 and PHP 5.4.0 (from svn) (php fpm). CentOs 5.8 64 The problem I have is that PHP crashes the moment I run any social oAuth scripts. I have tried to log into Facebook, Twitter and Google with various scripts that I know work on my other servers. When I load the scripts I get a 502 error from Nginx. And I find these errors in the log: in php-fpm log: WARNING: [pool www] child 23821 exited on signal 11 (SIGSEGV) after 1132.862984 seconds from start in nginx log: ERROR: recv() failed (104: Connection reset by peer) while reading response header from upstream From what I can see, it goes wrong when PHP tries to make a request to any of the oAuth servers. https://github.com/mahmudahsan/PHP-SDK-3.0---Graph-API-base-Facebook-Connect-Tutorial-Source for example is one of the scripts that works perfectly on my other machines, but causes PHP to crash. I found: http://stackoverflow.com/questions/3616191/nginx-php-fpm-502-bad-gateway which seems to be a similar problem, but I cannot find a way to solve it. +++ UPDATE +++ Now I have been doing some debugging in 1 of the scripts that is playing up. If you go to line 808 http://pastebin.com/gSnzRtXb it runs the curl_exec() command. When that is ran, it crashes. If i echo'test';exit; just above that line, it echo's correctly, if i do it below that line, php crashes. Which means it's that line 808 which causes the crash. So I made a very simple script to do some testing: http://pastebin.com/Rshnyhcm which also uses curl_exec, but that runs just fine. So I started to dig deeper into that query from the facebook script to see what values the $opts array contains from line 806. Output of that array is: http://pastebin.com/Cq9ffd3R What the problem is, I still have no clue :(

  Read the article

• PHP Output buffer flush issue on Apache/Linux

  - by Iiro Vaahtojärvi

  Hi, I'm running into issues with the PHP output buffer flushing on my Linux web server. The output buffer is maintained correctly and all the right data is pushed to it in my code, but the usual flushing mechanisms won't flush it to the browser. I have tried everything posted here: http://php.net/manual/en/function.flush.php but no success so far. I got a small script from php.net to test it: <?php ob_start(); for($i=0;$i<70;$i++) { echo 'printing...<br />'; ob_get_flush(); flush(); usleep(300000); } ?> This should print "printing..." to the browser 70 times, one line every three seconds. This works fine on my other testing environment which is based on Windows (still using apache, XAMPP package), but on my Linux server it doesn't. It waits for the script to finish before giving anything to the browser, basically ignoring the whole flush command. If anyone has experienced this before or knows of anything that could help (be it server configuration or adjustment to code) it would be greatly appreciated!

  Read the article

• eAccelerator Issue - Cache Directory Empty.

  - by Tom

  Hi all, Hoping someone can give me a hand with this. I've recently installated eAccelerator 0.9.6.1 - On a CentOS LAMP server. Had it working fine, using the /tmp/accelerator as the cache directory. php.ini set up: zend_extension="/usr/local/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so" eaccelerator.shm_size="200" eaccelerator.cache_dir="/var/cache/eaccelerator" eaccelerator.enable="1" eaccelerator.optimizer="1" eaccelerator.check_mtime="1" eaccelerator.debug="0" eaccelerator.filter="" eaccelerator.shm_max="0" eaccelerator.shm_ttl="3600" eaccelerator.shm_prune_period="180" eaccelerator.shm_only="1" eaccelerator.compress="1" eaccelerator.compress_level="9" php -v output: PHP 5.2.12 (cli) (built: Feb 3 2010 00:34:28) Copyright (c) 1997-2009 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies with eAccelerator v0.9.6.1, Copyright (c) 2004-2010 eAccelerator, by eAccelerator with the ionCube PHP Loader v3.3.20, Copyright (c) 2002-2010, by ionCube Ltd. I had to remove the cache directory as I was testing something. Remade it, re-set permissions and found that eAccelerator was no longer creating cache files within the folder. I thought it might be down to ownership rights on the folder so chown'd it apache.apache and this made no difference. I recreated the directory in /var/cache instead and editted php.ini to point to the new cache dir location, chmod'd, chown'd etc. and still eAccelerator is not creating any of the cache files in the directory (just empty). Could someone suggest what I might be doing incorrectly here. I've read through numerous pages to try and troubleshoot the issue to no avail. Any help appreciated.

  Read the article

• SQL Server Backup modes, and a huge log file

  - by Matt Dawdy

  Okay, I'm not a server administrator, a network guy, or a DBA. I'm merely a programmer helping out a small company. They have IT guy who isn't MS centric (most stuff is on Mac) and he and I are trying to figure out a solution here. We've got 1 main database. We run nightly full backups. I know they are full backups because I can take the latest file, or any of the daily backups, and go to a completely new machine and "restore" the backup to an empty database and our app runs perfectly fine off of this backup. The backups have grown from 60 MB to 250MB over 4 months. When running, then log file is 1.7 GB, and the data file is only 200-300 MB. Yes, recovery model is set to full. So, my question, after all of that, if we are keeping daily backups, and we don't have the need / aren't smart enough to roll the DB back to a certain time, if I change the recovery mode to simple, am I really losing anything? And, if I do change it to simple, will it completely dump the log file or at least reduce it way the hell down? And, will that make our database run faster? I know that it'll make my life easier when I copy a relatively recent backup to my local machine to do development and testing...

  Read the article

• Is there an SSL equivelent to an ssh agent?

  - by Matthew J Morrison

  Here is my situation: There are a number of developers who all need to have access to be able to install ruby gems and python eggs from a remote source. Currently, we have a server inside our firewall that hosts the gems and eggs. We now want the ability to be able to install things hosted on that server outside of our firewall. Since some of the gems and eggs that we host are proprietary I would like to somewhat lock access to that machine down, as unobtrusively as possible to the developers. My first thought was using something like ssh keys. So, I spent some time looking at SSL mutual authentication. I was able to get everything set up and working correctly, testing with curl, but the unfortunate thing was that I had to pass extra arguments to curl so it knows about the certificate, key and certificate authority. I was wondering if there is anything like the ssh agent that I can set up to provide that information automatically so that I can push the certificates and keys to the developer's machines so the developers don't have to log in or provide keys each time they try to install something. Another thing that I want to avoid is having to modify the 'gem' command and the 'pip' command to provide keys when they make the http connection. Any other suggestions that may solve this problem (not related to ssl mutual auth) are also welcome. EDIT: I've been continuing to research this and I came across stunnel. I think this may be what I'm looking for, any feedback regarding stunnel would also be great!

  Read the article

• Windows 7 VPN Error 619

  - by TravisPUK

  So I am running Windows 7 Enterprise. This morning I was able to VPN using the built in VPN (Connect to Work Network etc). I had to change my network's IP address range and now the VPN will not work. It just stalls on the Verifying user name and password... message. But then it returns the 619 error. Anybody know why changing my machine's IP address would cause this problem? Where should I be looking to try and fix this issue? I have tried this on a Windows XP machine that also had the IP address range change and this still connects fine using exactly the same connection details. EDIT The internal network range changed from 192.x.x.x to 10.x.x.x. This was done on the entire Active Directory. All machines are running fine and the Windows XP machine, that works going to the same client VPN mentioned above is on the same network. Both the XP and the Win 7 machines are using DHCP served by the Domain Controller. The client domain is not performing any IP range checks/restrictions. The VPN is outside the internal network, connection is being made via the Internet and not passing through any other machine, other than the normal domain machines, ie DNS etc. This is passing through a router and the router has the relevant VPN passthrough options configured. All internal machines are working correctly with other forms of VPN, ie Cisco, Sonic etc (these were tested on other machines, they are not installed on the Vista or Win7 machines). After further testing, this is occurring on all Win7 and Vista machines where they can no longer connect to the client VPN, however all XP machines can still connect fine. This has been tested on three Vista, two Win7 and five XP machines. All machines are on DHCP and tests have been done with both the firewalls turned on and off, as well as with fixed IPs being used. Thanks Travis

  Read the article

• Free/opensource application for charting stock prices?

  - by Homunculus Reticulli

  I am looking for a free or FOSS software application for SIMPLY charting stock prices. I am not interested in any of the other nonsense typically bundled with such packages (technical analysis, back testing, tracking etc, etc). All I want to do is the following: Import file from CSV and plot on the chart Ability to scroll the chart left/right (zoom feature would be nice to) Ability to draw straight line (between 2 points) on the plot Ability to plot the graph for different resolutions (for e.g weekly, monthly - or some other custom resolution that I want) print the displayed graph (I can always use screen capture if printing is too much to ask) Thats all I want to do. I am not interested in anything else. I would have thought I could have found something by now. I would have written my own tool (I still will do that at a later stage), but I am a bit short of time at the moment, so I just want something that will do all of the above. Can anyone recommend a package. Last but not the least, I am running on Linux (and would prefer to do so - BUT if I have to, I can run on ahem - you know, Windows)

  Read the article

• svn post-commit not performing

  - by davin

  ive been sitting on this for about 7 hours, and ive aged close to 7 years... ahhh, server admin does that to me. i have svn wired through apache2 with webdav in the usual manner (basically like http://www.howtoforge.com/setting-up-subversion-with-webdav-post-commit-hook-and-multiple-sites-on-jaunty-jackalope-ubuntu-9.04). ive had endless problems with this (i didnt on my previous ubuntu server install, although this is ubuntu 10.10): this happened, and was fixed like in the post: http://stackoverflow.com/questions/2547400/how-do-you-fix-an-svn-409-conflict-error this looks like my issue, although its not my solution: http://serverfault.com/questions/135494/apache-svn-on-ubuntu-post-commit-hook-fails-silently-pre-commit-hook-permis my commit to svn works (finally). although the post-commit hook which is supposed to svn update the working copy of the repo on the server, doesn't work. the post-commit hook itself executes, and has sudo permissions (as in the setup url above. testing with whoami somelogfile.log or sudo whoami somelogfile.log shows www-data and root, respectively), although it wont perform the svn update (sudo svn update /var/www/gameServer /var/svn/gameServer.log). similar to the serverfault url above, when i perform the exact command it does update the working copy to the latest revision, just not through the post-commit hook. an age old question that is 90% of the time a permissions issue. but in pure frustration i chmod 777 lots of stuff not to mention the fact that www-data is in /etc/sudoer so it shouldnt even need that. im collapsing in front of the screen partly out of frustration and partly out of sleepiness. any direction would be appreciated.

  Read the article

• Sharepoint (WSS 3.0) on SBS 2008 broken.

  - by tcv

  I recently ran the Sharepoint Products and Technologies Wizard. I had hoped this would bring up Sharepoint and allow me to access it so I could begin to learn. But it's not working. Here is some data that I hope is relevant. I am doing all my testing on the SBS 2008 server itself. I changed the hostheader in IIS to reflect an external FQDN I plan to deploy. The SBS server is remote and there are no domain-connected workstations. If I browse "localhost" SSL, I can get to the site, albeit with a self-signed cert warning. If I attempt to connect via SSL using either the internal FQDN (.local), the External FQDN (.net) or any other permutation thereof, I am prompted for credentials three times but am not allowed access. My account is a domain admin. The site is inaccessible using port 80 whether using localhost, internal FQDN (.local), and external FQDN (.net) Right now, I suspect my problem is within IIS, but I don't know. My plan to publish the sharepoint site to the web so my partner and I can check documents in/out. Can someone help me get started in current direction?

  Read the article

• How to send mail with PHP [migrated]

  - by roth66

  My litle problem is about mail() function in PHP, it doesnt want to send emails, to my local server, or anywhere else. I don't think that function was supposed to send mail to adresses like: [email protected]; So I've installed a mail server: hmailserver, I installed a client: dream-mail; I installed sendmaill.exe; (actually unzipped it in a folder, then in php.ini set the sendmail_path to point to it) After countless trials and errors, it still doesn't work. my system would comprise in an Apache server 2.2, and PHP (last version I think 5.3 or somehing), running on windows. And now for avoiding the usual questions (Did you make rules in your firewall etc etc), I guess I should mention, that there arent any connectivity issues, everything is set to "local" (localhost), port 25, 110, 143, are all opened, And, after a few days of fiddling with my brand new mail-server, I manage to make it work. THe Dream-mail client, has a test, trough which it would test its connections, and according to it, the SMTP AND POP3 connections are all successful, it even sends an email, for testing. SO ya, it would work. The problem, remains: PHP mail funcion. And I really need it, since on my website there's a contact form, and right now is useless. I've also checked the form it self, and seems to be alright.

  Read the article

< Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >