Search Results

Search found 15196 results on 608 pages for 'browser detection'.

Page 366/608 | < Previous Page | 362 363 364 365 366 367 368 369 370 371 372 373  | Next Page >

• CNTLM issue with intranet (maybe DNS)

  - by htorque

  On my Linux box I need to use an ISA proxy that requires authentication to reach the internet. I therefore installed CNTLM and configured it to point to the proxy address and listen on port 4321. I then configured my GNOME distribution to use localhost:4321 as global proxy for HTTP and HTTPS. The result: I can connect to the internet. I can ping intranet IPs, I do receive name resolution for intranet sites, yet I cannot ping them or open any intranet site in a browser (configured to use the distributions proxy) unless I use the site's IP address. I tried blocking the intranet IP range in the CNTLM config file without luck.

  Read the article

• Setting up nginx on Ubuntu?

  - by Industrial

  Hi everyone, I've just setup a VPS running Ubuntu server 10.10 as a test environment to run with nginx. This far i've ran apt-get install nginx php5 php5-cgi and accessed the IP of the VPS with a browser which outputs It works, so it should be ready to run. Never having worked with nginx in the past, I have no idea on what to do next. How should I config my nginx install to run properly as a staging server in my LAN? Apparently, there's multiple configs for nginx including sites-default and nginx-default making me really confused.

  Read the article

• creating proper vpn tunnel, when both LANs have the same addressing

  - by meta

  I was following this tutorial http://wiki.debian.org/OpenVPN#TLS-enabled_VPN and this one http://users.telenet.be/mydotcom/howto/linux/openvpn.htm to create openvpn connection to my remote LAN. But both examples assumed that both LANs have different addresses (ie 192.168.10.0/24 and 192.168.20.0/24, check out this image i.stack.imgur.com/2eUSm.png). Unfortunately in my case both local and remote lan have 192.168.1.0/24 addresses. I am able to connect directly on the openvpn server (I can ping it and log in with ssh), but I can't see other devices on the remote LAN (not mentioning accessing them via browser which was the point from the first place). And don't know if the addressing issue may be the reason of that? If not - how to define routes, so I could ping other devices in remote LAN?

  Read the article

• Web based console connections not working in Windows 7 posted: Jan 20, 2010 8:55 AM

  - by nmeth

  For slightly complicated reasons we tend to give people console access to VMs via the webui. This has worked fine in the past, however when the users update their client machines to Windows 7 (or Vista, I am told, although I have not tested that), then the console fails to work. On IE8, having allowed the ActiveX control, the tab causes a "Internet Explorer has stopped working" dialog. On Firefox 3.5 , once the plugin has been installed, using the console causes the browser to crash. I've updated to the most recent VC 2.5 release, and ESX 3.5u5. Anyone else seeing this? Any clues how to get round it (other than using the fat client). Nigel.

  Read the article

• http://localhost:8080 is not working on running apacher Server through XAMPP

  - by Dinesh Kumar

  I am unable to configure a PHP/MySQL/Apache environment on my local machine using XAMPP. In my xampp control panel the Apache and MySQL status is as started, but localhost is not working. I have tried the following method but still i am unable to execute: I tried to reinstall after uninstalling several time. I changed the "Listen 80" to Listen localhost:80, localhost:8080, 127.0.0.1:80,127.0.0.1:8080, MySystemIP:80/8080 and tried to execute the relevant url in my browser. I executed the netstat -noa and tasklist and found Apache is is using Port80. Skype is also not using the port80. I edited the firewall to allow port80. Also disabled the firewall. Is there any other solution to fix my problem. I remember 8 months back everything worked properly. Now when i try to reinstall xampp the issue raised it. I am Using Win-xp os. Thanks in advance

  Read the article

• ReadyNAS issue with Google Apps?

  - by Jauder Ho

  The power went out (again) in my house today so I decided to set up some alerting. Since I have a ReadyNAS and the latest version of Raidinator seems to have SMTP TLS support, I figured I would try setting things up to email to a domain I have hosted on Google Apps. At this point, I have everything working IF I use a Gmail account but as soon as I switch to a Google Apps email address, it stops working and complains with smtpstatus=535 smtpmsg='535-5.7.1 Username and Password not accepted. Learn more at \n535 5.7.1 http://mail.google.com/support/bin/answer.py?answer=14257 30sm16076226wfd.23' errormsg='authentication failed (GNU SASL, method PLAIN)' exitcode=EX_NOPERM I'm wondering if anyone else has encountered this. Google's extremely aggressive captcha does not help but I am able to log in now without a captcha from a browser so I'm open to any ideas why the simple switch of a user/password combo that is supposed to work does not. I'm also attaching my config so that others can see how to set things up.

  Read the article

• Internet not working on a VirtualBox Linux machine

  - by mtahmed

  I installed VirtualBox on a Windows 7 PC and installed Xubuntu (Ubuntu with XFCE) on it. Now on the Windows, I am connected to the internet through a LAN which automatically authenticates to connect to the network(because its my work computer). I have also installed the guest additions on this virtual machine (Xubuntu). I tried both NAT and bridging to set up internet connection but I still cannot connect to the internet. For NAT: The browser doesn't say website not found but it keeps trying to load it forever and the network status monitor (the one provided by VirtualBox) doesn't show any green light (no incoming packets). For Bridging: Same as for NAT but the network status monitor shows incoming packets and outgoing packets. But internet still doesn't work. I tried a lot of different things but none worked.

  Read the article

• Troubles logging into VPN on Win7 64bit

  - by mike

  Hi, Before I can successfully logon to my company's VPN it runs a small check in the browser to check my current processes. One of the things it checks (among other things) is to see if you have an antivirus running. If you don't, you can't connect and it says please install one with a couple links to some free ones. The issue I'm having is I recently upgraded to Win7 x64 and I haven't been able to get past the "antivirus check" part. Before, I had AVG running and I never had a single problem for years. Now I tried both AVG and Avast and I still get blocked. Does it have something to do with both of these antiviruses running in *32 mode in the processes? Any help or ideas on how to fix this would be awesome. Thanks!

  Read the article

• Domain points me to some malicious URL and I can't get rid of it

  - by Legend

  Whenever I enter my URL into the browser, it keeps pointing me to http://fornax.myvnc.com/dev The URL doesn't even work and my antivirus doesn't complain about it so I am not sure what is happening. I logged into my domain manager at godaddy and it says that the nameservers are pointing to: NS46.DOMAINCONTROL.COM and I am not sure where this came from either because my hosting is with lunarpages whose nameserver is NS1.LUNARMANIA.COM I tried looking into my .htaccess and it is blank. My index.php was hijacked with some malicious code so I removed it completely. Everything is supposed to be normal now but still some kind of a redirection is taking place and am not sure where this is happening. Any suggestions?

  Read the article

• Rewriting URLs from subdomain to domain in Apache

  - by Nazgulled

  Hi, My webserver is running Plesk and part of my site structure goes like this: / /httpdocs (domain root folder, URL: http://www.domain.com) /subdomains /subdomains/blog/httpdocs (blog root folder, URL: http://blog.domain.com) I have a WordPress installation in the domain root folder and WP is configured to display a static page when accessing www.domain.com and to display the blog when accessing www.domain.com/blog. However, I want to redirect (using mod_rewrite) all requests from http://blog.domain.com/ to http://www.domain.com/blog/. A few examples: Accessing http://blog.domain.com/archives should access http://www.domain.com/blog/archives/ Accessing http://blog.domain.com/tag/abc should access http://www.domain.com/blog/tag/abc/ Accessing http://blog.domain.com/some-post-title should access http://www.domain.com/blog/some-post-title All this should be transparent to the user, the address shouldn't be changed on the browser's address bar. In better words, I want a URL rewrite and not a URL redirect. Is this achievable with mod_rewrite? Can anyone help me with the .htaccess? All my attempts on doing so have failed...

  Read the article

• IIS displaying page differently when localhost is used in URL vs. hostname

  - by maik

  I'm having (yet another) strange problem with IIS. When viewing an ASPX page I've designed on my local machine by browsing to http://localhost/page.aspx the page looks as expected (and looks the same in IE, Firefox and Chrome. If I change localhost to my_hostname the page is rendered with a disabled vertical scroll bar. The behavior was first noticed when I published my site to our live server and saw the same discrepancy. After beating my head against the wall I tried what I described above and was able to duplicate my "problem". So with that, I turn to you guys. This wouldn't really be an issue (save for the cross-browser inconsistency) except that this screws up an "absolute"ly positioned <div> moving it partway off the screen instead of being centered like it should be (and is when viewed any other way except in IE when the address is anything but localhost).

  Read the article

• Config xampp never to cache pages from localhost

  - by Michael Mao

  Hello everyone: I am not a webmaster, and that was exactly the reason why I installed XAMPP 1.7.2 on Windows XP SP2 instead of manually configuring Apache, MySQL and PHP to cooperate each other. Now I am having to problem to disable caching pages from localhost. Some suggested just force the browser not to cache, using Firefox web developer bar or something similar; but I feel it would be better if I could configure the Apache server in XAMPP to never allow pages from localhost to be cached. I guess this is done somewhere in httpd.conf? LoadModule cache_module modules/mod_cache.so Would this module be helpful in this case? Doc here : mod_cache I am not very sure this would resolve the problem. Could anyone confirm this approach feasible? I'd like to work it out myself, given the fact that I am on the right track... Many thanks in advance

  Read the article

• Spoofing domains - using one domain to look at another without frame redirect

  - by hfidgen

  Hiya, In Plesk 9.2.2 does anyone know how the following can be achieved? I've got domain1.co.uk registered in plesk, but the domain has not been set up with any nameservers or A records, so it is unreachable from the web. However, I need to test it while we get the domain1.co.uk nameservers etc sorted over the next week or so. SO, i've got sparedomain.co.uk registered, with the nameservers and A records pointing to the server, and sure enough it displays the default plesk "theres no website here yet page" . bingo. Now, how can I set up sparedomain.co.uk on my plesk server, so it displays all the data held on the plesk account for domain1.co.uk? Frame forwarding doesnt work - because you get errors saying "domain1.co.uk cannot be found" in your browser - i need a server solution to spoof it all. Anyone got any ideas? Thanks!

  Read the article

• A clear understanding about Mozilla Firefox web applications

  - by Girish Mony

  I have seen lately a concept of installing open web applications in Firefox and Google Chrome just like extensions here . While the site says it as a installable websites. It looks very similar to bookmarks to me. When you click either bookmarks or this installed applications, it opens new tab and the site or application can be viewed. My question is what is the main difference between normal web application like Gmail, or Super user or Facebook and these installable websites? Also what is the advantage in using this installable web apps from normal web applications which we can access by entering url in the browser address bar? I hope this is the right place to post this question. If not please guide me accordingly.

  Read the article

• SharePoint 2010 not seeing Active Directory users

  - by user117927

  I'm pretty new to Active Directory and SharePoint but I was given to understand they are supposed to play well together. Now I have successfully set up AD with multiple user accounts that work on any member computer. I have also successfully installed SharePoint 2010 Server on an AD machine. Both the AD server and SharePoint servers are on separate machines (VMs running on ESXi to be precise). I can only log on with user accounts I create on the local server. Furthermore the user browser thing for adding users will only see local users. I've followed the advice here http://technet.microsoft.com/en-us/library/cc262350.aspx#section2 for Classic authentication and also NTLM claims based authentication but to no avail. Is there something fundamental I am getting wrong here? I'd be really thankful for any help you can lend me; I've been googling and scratching my head for a couple of days now. P

  Read the article

• Hosting 2 different SSL domains on the same IP [closed]

  - by Jim

  Possible Duplicate: Multiple SSL domains on the same IP address and same port? I have 2 different domains, domain1.com and domain2.net. Both require SSL certificates. I've got the certificates signed by a CA and now need to set them up on Apache. I've got a single IP address and have found a post here: SSL site not using the correct IP in Apache and Ubuntu that apparently works for ubuntu but I am on CentOS and have not had the same luck trying that configuration. When I try that configuration, Apache dies telling me that the port is already in use: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:443 I had SSL working for a single domain but now that I've added the second, I get a browser warning about the cert not belonging to the domain. How do I get both domains to work using virtual host containers?

  Read the article

• Using .htaccess to protect direct access of files

  - by claydough

  We need to prevent direct access of files on our site from someone just entering a URL in their browser. I got this to work by using an htaccess file and it is fine in IE & Safari, but for some reason Firefox doesn't cooperate. I think it has something to do with the way Firefox reports referrers. Here is my code in the .htaccess file. RewriteEngine On RewriteBase / RewriteCond %{HTTP_REFERER} !^http://(my\.)?bigtimbermedia\.com/.*$ [NC] RewriteRule \.(swf|gif|png|jpg|doc|xls|pdf|html|htm|xlsx|docx)$ http://my.bigtimbermedia.com/ [R,L] If you want to see an example of this, try accessing this first... http://my.bigtimbermedia.com/books/bpGreyWolvesflip/index.html It blocks it properly in all browsers. Now if you go to this URL and click on the link, it works in IE and Safari, but Firefox chokes and seems like it is in a loop. Any ideas how I can get this to work in Firefox? Thanks!

  Read the article

• Using client certificates with wget

  - by Doc

  I cannot get wget to use the client certificates. The documentation speaks about using the --certificate flag. The use of the certificate flag is clear, I set it to use the PEM version of the client certificate. But when I connect I get the following error: HTTP request sent, awaiting response... Read error (error:14094410:SSL routines: SSL3_READ_BYTES:sslv3 alert handshake failure; error:140940E5:SSL routines:SSL3_ READ_BYTES:ssl handshake failure) in headers. Giving up. ssl handshake failure means the client did not supply a correct client cert. Still the client cert I use, works in a browser. Note: When I disable client authentication on the server, wget can connect. Note: The use of curl is suggested, but I'd like to avoid the switch.

  Read the article

• nginx reverse proxy hide redirects

  - by NZCoderGuy

  I've Nginx as a reverse proxy for two sites A and B running behind. The users go from public - reverse proxy - site A - site B (from A to B clicking links) What would be a typical configuration for a scenario like this? The url in the browser should be always the reverse proxy This is what I've so far but is not working worker_processes 2; error_log logs/error.log info; events { worker_connections 1024; } http { server { resolver 127.0.0.1; listen 8080; location / { set $target 'siteA'; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; rewrite ^(.*) $1 break; proxy_pass http://$target; } } }

  Read the article

• Virtual guest does not have network access in cafe.

  - by blee

  My Virtualbox guest OS (Ubuntu on ubuntu host) does not connect to the internet when I have wifi access through an internet cafe system. By this, I mean where your browser redirects to an internal web page where you can enter a code. On the guest, I can successfully connect to the virtual network adapter, but I do not get internet access, nor a redirect to the internal web page. I use OpenDNS for the host. I have no problems when connecting through ethernet or regular wifi. Can someone tell me any of: 1) How to fix the problem. 2) How such cafe systems work. 3) At least point me to a technical explanation of such a cafe system so I can begin to troubleshoot. Thanks!

  Read the article

• How to remove one or all auto-complete text entries in Chrome? [closed]

  - by Kayle

  Possible Duplicate: Remove auto-complete field entries in Google Chrome Ok... so this is embarrassing. I typed in "boobs" on EncyclopediaDramatica's search because, well, it's a really funny page. But now I've got a problem... EVERY TIME I click a search feild in Chrome now, it shows "boobs" as the first suggestion in the drop down! This is not really socially acceptable as this laptop goes with me everywhere and Chrome is my primary browser. Is there a way I can isolate and remove just that one entry?

  Read the article

• Windows 8.1 unable to play Music or the Audio from videos through Optical Out

  - by Zion Fox

  I am having an issue with my audio output, where any music file, and the audio side of videos are not being played through my optical audio output. I am running a Realtek HD Audio device built on Revision 1.0 on a GA-P55A-UD6 Gigabyte Board, which runs through it's optical output to an Astro A40 Mixamp, which does some upscaling before sending it to the headset. Now, notification sounds, and sounds/videos/music played through the browser or programs like Skype or games are working fine. This seems to specifically effect Foobar2000 and Media Player Classic. I have updated these two programs to their latest revisions, in addition to the soundcard drivers to no avail, and searching the error code thrown by Foobar2000: Unrecoverable playback error: The parameter is incorrect. (0x80070057) through Google returns not very helpful results, other than the one potentially mentioning DRM. This issue I am having a very hard time resolving, and am wondering if anyone here has experienced similar issues after updating.

  Read the article

• Keyboard Navigation of File Open Dialog in Windows 7

  - by dkusleika

  In Windows XP standard File - Open dialog, the top has a "Look In" box. I can press Alt+I to drop down a tree of the disks folders and easily navigate to other folders or network shares. In Windows 7, I can't seem to navigate the File - Open dialog as easily. The best I've been able to muster is to tab 5 times (in Excel 2007, but I assume it's a windows standard), then use arrow keys or use Alt+arrow keys like a browser to get around. It's simply not as good because I can't see the whole tree at once. Is there a way to see the whole folder tree? If not, do you have any other tips for keyboard navigation of the file open dialog in Windows 7?

  Read the article

• Mysterious problem...can remotely connect to a system but can't browse back out.

  - by GregH

  I have LogMeIn installed on my home system. I went on travel and my wife called saying that none of our home systems could browse the internet. I thought I would try to connect to my home system using logmein. Surprisingly, I was able to connect to my home system and log in without any problems using logmein. When I opened a browser from my home system, I indeed could not browse. I opened a command prompt and tried to ping my router (192.168.1.1) and it failed/timed out. How is this possible? I can remotely connect to my system but once logged in cannot even ping my router. What's up with that?

  Read the article

• Is there any way to play Netflix (stream) in Windows Media Player 11?

  - by Not So Sharp

  Googling for a solution yields a ridiculous page on eHow that instructs to insert a DVD from Netflix. But I am not interested in the DVD option. I am only interested in streaming and unfortunately none of my browsers (IE, FF, Chrome) uses the hardware acceleration built into my video card. The only way I can play non-choppy video on my PC is via Windows Media Player, but WMP doesn't list Netflix as one of the supported online stores for some reason. Any idea or trick how stream Netflix on WMP 11 instead of a browser?

  Read the article

< Previous Page | 362 363 364 365 366 367 368 369 370 371 372 373  | Next Page >