Search Results

Search found 9215 results on 369 pages for 'double pointers'.

Page 366/369 | < Previous Page | 362 363 364 365 366 367 368 369  | Next Page >

  • How do I use texture-mapping in a simple ray tracer?

    - by fastrack20
    I am attempting to add features to a ray tracer in C++. Namely, I am trying to add texture mapping to the spheres. For simplicity, I am using an array to store the texture data. I obtained the texture data by using a hex editor and copying the correct byte values into an array in my code. This was just for my testing purposes. When the values of this array correspond to an image that is simply red, it appears to work close to what is expected except there is no shading. The bottom right of the image shows what a correct sphere should look like. This sphere's colour using one set colour, not a texture map. Another problem is that when the texture map is of something other than just one colour pixels, it turns white. My test image is a picture of water, and when it maps, it shows only one ring of bluish pixels surrounding the white colour. When this is done, it simply appears as this: Here are a few code snippets: Color getColor(const Object *object,const Ray *ray, float *t) { if (object->materialType == TEXTDIF || object->materialType == TEXTMATTE) { float distance = *t; Point pnt = ray->origin + ray->direction * distance; Point oc = object->center; Vector ve = Point(oc.x,oc.y,oc.z+1) - oc; Normalize(&ve); Vector vn = Point(oc.x,oc.y+1,oc.z) - oc; Normalize(&vn); Vector vp = pnt - oc; Normalize(&vp); double phi = acos(-vn.dot(vp)); float v = phi / M_PI; float u; float num1 = (float)acos(vp.dot(ve)); float num = (num1 /(float) sin(phi)); float theta = num /(float) (2 * M_PI); if (theta < 0 || theta == NAN) {theta = 0;} if (vn.cross(ve).dot(vp) > 0) { u = theta; } else { u = 1 - theta; } int x = (u * IMAGE_WIDTH) -1; int y = (v * IMAGE_WIDTH) -1; int p = (y * IMAGE_WIDTH + x)*3; return Color(TEXT_DATA[p+2],TEXT_DATA[p+1],TEXT_DATA[p]); } else { return object->color; } }; I call the colour code here in Trace: if (object->materialType == MATTE) return getColor(object, ray, &t); Ray shadowRay; int isInShadow = 0; shadowRay.origin.x = pHit.x + nHit.x * bias; shadowRay.origin.y = pHit.y + nHit.y * bias; shadowRay.origin.z = pHit.z + nHit.z * bias; shadowRay.direction = light->object->center - pHit; float len = shadowRay.direction.length(); Normalize(&shadowRay.direction); float LdotN = shadowRay.direction.dot(nHit); if (LdotN < 0) return 0; Color lightColor = light->object->color; for (int k = 0; k < numObjects; k++) { if (Intersect(objects[k], &shadowRay, &t) && !objects[k]->isLight) { if (objects[k]->materialType == GLASS) lightColor *= getColor(objects[k], &shadowRay, &t); // attenuate light color by glass color else isInShadow = 1; break; } } lightColor *= 1.f/(len*len); return (isInShadow) ? 0 : getColor(object, &shadowRay, &t) * lightColor * LdotN; } I left out the rest of the code as to not bog down the post, but it can be seen here. Any help is greatly appreciated. The only portion not included in the code, is where I define the texture data, which as I said, is simply taken straight from a bitmap file of the above image. Thanks.

    Read the article

  • C# Reading and Writing a Char[] to and from a Byte[] - Updated with Solution

    - by Simon G
    Hi, I have a byte array of around 10,000 bytes which is basically a blob from delphi that contains char, string, double and arrays of various types. This need to be read in and updated via C#. I've created a very basic reader that gets the byte array from the db and converts the bytes to the relevant object type when accessing the property which works fine. My problem is when I try to write to a specific char[] item, it doesn't seem to update the byte array. I've created the following extensions for reading and writing: public static class CharExtension { public static byte ToByte( this char c ) { return Convert.ToByte( c ); } public static byte ToByte( this char c, int position, byte[] blob ) { byte b = c.ToByte(); blob[position] = b; return b; } } public static class CharArrayExtension { public static byte[] ToByteArray( this char[] c ) { byte[] b = new byte[c.Length]; for ( int i = 1; i < c.Length; i++ ) { b[i] = c[i].ToByte(); } return b; } public static byte[] ToByteArray( this char[] c, int positon, int length, byte[] blob ) { byte[] b = c.ToByteArray(); Array.Copy( b, 0, blob, positon, length ); return b; } } public static class ByteExtension { public static char ToChar( this byte[] b, int position ) { return Convert.ToChar( b[position] ); } } public static class ByteArrayExtension { public static char[] ToCharArray( this byte[] b, int position, int length ) { char[] c = new char[length]; for ( int i = 0; i < length; i++ ) { c[i] = b.ToChar( position ); position += 1; } return c; } } to read and write chars and char arrays my code looks like: Byte[] _Blob; // set from a db field public char ubin { get { return _tariffBlob.ToChar( 14 ); } set { value.ToByte( 14, _Blob ); } } public char[] usercaplas { get { return _tariffBlob.ToCharArray( 2035, 10 ); } set { value.ToByteArray( 2035, 10, _Blob ); } } So to write to the objects I can do: ubin = 'C'; // this will update the byte[] usercaplas = new char[10] { 'A', 'B', etc. }; // this will update the byte[] usercaplas[3] = 'C'; // this does not update the byte[] I know the reason is that the setter property is not being called but I want to know is there a way around this using code similar to what I already have? I know a possible solution is to use a private variable called _usercaplas that I set and update as needed however as the byte array is nearly 10,000 bytes in length the class is already long and I would like a simpler approach as to reduce the overall code length and complexity. Thank Solution Here's my solution should anyone want it. If you have a better way of doing then let me know please. First I created a new class for the array: public class CharArrayList : ArrayList { char[] arr; private byte[] blob; private int length = 0; private int position = 0; public CharArrayList( byte[] blob, int position, int length ) { this.blob = blob; this.length = length; this.position = position; PopulateInternalArray(); SetArray(); } private void PopulateInternalArray() { arr = blob.ToCharArray( position, length ); } private void SetArray() { foreach ( char c in arr ) { this.Add( c ); } } private void UpdateInternalArray() { this.Clear(); SetArray(); } public char this[int i] { get { return arr[i]; } set { arr[i] = value; UpdateInternalArray(); } } } Then I created a couple of extension methods to help with converting to a byte[] public static byte[] ToByteArray( this CharArrayList c ) { byte[] b = new byte[c.Count]; for ( int i = 0; i < c.Count; i++ ) { b[i] = Convert.ToChar( c[i] ).ToByte(); } return b; } public static byte[] ToByteArray( this CharArrayList c, byte[] blob, int position, int length ) { byte[] b = c.ToByteArray(); Array.Copy( b, 0, blob, position, length ); return b; } So to read and write to the object: private CharArrayList _usercaplass; public CharArrayList usercaplas { get { if ( _usercaplass == null ) _usercaplass = new CharArrayList( _tariffBlob, 2035, 100 ); return _usercaplass; } set { _usercaplass = value; _usercaplass.ToByteArray( _tariffBlob, 2035, 100 ); } } As mentioned before its not an ideal solutions as I have to have private variables and extra code in the setter but I couldnt see a way around it.

    Read the article

  • Using a boost::fusion::map in boost::spirit::karma

    - by user1097105
    I am using boost spirit to parse some text files into a data structure and now I am beginning to generate text from this data structure (using spirit karma). One attempt at a data structure is a boost::fusion::map (as suggested in an answer to this question). But although I can use boost::spirit::qi::parse() and get data in it easily, when I tried to generate text from it using karma, I failed. Below is my attempt (look especially at the "map_data" type). After some reading and playing around with other fusion types, I found boost::fusion::vector and BOOST_FUSION_DEFINE_ASSOC_STRUCT. I succeeded to generate output with both of them, but they don't seem ideal: in vector you cannot access a member using a name (it is like a tuple) -- and in the other solution, I don't think I need both ways (member name and key type) to access the members. #include <iostream> #include <string> #include <boost/spirit/include/karma.hpp> #include <boost/fusion/include/map.hpp> #include <boost/fusion/include/make_map.hpp> #include <boost/fusion/include/vector.hpp> #include <boost/fusion/include/as_vector.hpp> #include <boost/fusion/include/transform.hpp> struct sb_key; struct id_key; using boost::fusion::pair; typedef boost::fusion::map < pair<sb_key, int> , pair<id_key, unsigned long> > map_data; typedef boost::fusion::vector < int, unsigned long > vector_data; #include <boost/fusion/include/define_assoc_struct.hpp> BOOST_FUSION_DEFINE_ASSOC_STRUCT( (), assocstruct_data, (int, a, sb_key) (unsigned long, b, id_key)) namespace karma = boost::spirit::karma; template <typename X> std::string to_string ( const X& data ) { std::string generated; std::back_insert_iterator<std::string> sink(generated); karma::generate_delimited ( sink, karma::int_ << karma::ulong_, karma::space, data ); return generated; } int main() { map_data d1(boost::fusion::make_map<sb_key, id_key>(234, 35314988526ul)); vector_data d2(boost::fusion::make_vector(234, 35314988526ul)); assocstruct_data d3(234,35314988526ul); std::cout << "map_data as_vector: " << boost::fusion::as_vector(d1) << std::endl; //std::cout << "map_data to_string: " << to_string(d1) << std::endl; //*FAIL No 1* std::cout << "at_key (sb_key): " << boost::fusion::at_key<sb_key>(d1) << boost::fusion::at_c<0>(d1) << std::endl << std::endl; std::cout << "vector_data: " << d2 << std::endl; std::cout << "vector_data to_string: " << to_string(d2) << std::endl << std::endl; std::cout << "assoc_struct as_vector: " << boost::fusion::as_vector(d3) << std::endl; std::cout << "assoc_struct to_string: " << to_string(d3) << std::endl; std::cout << "at_key (sb_key): " << boost::fusion::at_key<sb_key>(d3) << d3.a << boost::fusion::at_c<0>(d3) << std::endl; return 0; } Including the commented line gives lots of pages of compilation errors, among which notably something like: no known conversion for argument 1 from ‘boost::fusion::pair’ to ‘double’ no known conversion for argument 1 from ‘boost::fusion::pair’ to ‘float’ Might it be that to_string needs the values of the map_data, and not the pairs? Though I am not good with templates, I tried to get a vector from a map using transform in the following way template <typename P> struct take_second { typename P::second_type operator() (P p) { return p.second; } }; // ... inside main() pair <char, int> ff(32); std::cout << "take_second (expect 32): " << take_second<pair<char,int>>()(ff) << std::endl; std::cout << "transform map_data and to_string: " << to_string(boost::fusion::transform(d1, take_second<>())); //*FAIL No 2* But I don't know what types am I supposed to give when instantiating take_second and anyway I think there must be an easier way to get (iterate over) the values of a map (is there?) If you answer this question, please also give your opinion on whether using an ASSOC_STRUCT or a map is better.

    Read the article

  • Cobol: science and fiction

    - by user847
    There are a few threads about the relevance of the Cobol programming language on this forum, e.g. this thread links to a collection of them. What I am interested in here is a frequently repeated claim based on a study by Gartner from 1997: that there were around 200 billion lines of code in active use at that time! I would like to ask some questions to verify or falsify a couple of related points. My goal is to understand if this statement has any truth to it or if it is totally unrealistic. I apologize in advance for being a little verbose in presenting my line of thought and my own opinion on the things I am not sure about, but I think it might help to put things in context and thus highlight any wrong assumptions and conclusions I have made. Sometimes, the "200 billion lines" number is accompanied by the added claim that this corresponded to 80% of all programming code in any language in active use. Other times, the 80% merely refer to so-called "business code" (or some other vague phrase hinting that the reader is not to count mainstream software, embedded systems or anything else where Cobol is practically non-existent). In the following I assume that the code does not include double-counting of multiple installations of the same software (since that is cheating!). In particular in the time prior to the y2k problem, it has been noted that a lot of Cobol code is already 20 to 30 years old. That would mean it was written in the late 60ies and 70ies. At that time, the market leader was IBM with the IBM/370 mainframe. IBM has put up a historical announcement on his website quoting prices and availability. According to the sheet, prices are about one million dollars for machines with up to half a megabyte of memory. Question 1: How many mainframes have actually been sold? I have not found any numbers for those times; the latest numbers are for the year 2000, again by Gartner. :^( I would guess that the actual number is in the hundreds or the low thousands; if the market size was 50 billion in 2000 and the market has grown exponentially like any other technology, it might have been merely a few billions back in 1970. Since the IBM/370 was sold for twenty years, twenty times a few thousand will result in a couple of ten-thousands of machines (and that is pretty optimistic)! Question 2: How large were the programs in lines of code? I don't know how many bytes of machine code result from one line of source code on that architecture. But since the IBM/370 was a 32-bit machine, any address access must have used 4 bytes plus instruction (2, maybe 3 bytes for that?). If you count in operating system and data for the program, how many lines of code would have fit into the main memory of half a megabyte? Question 3: Was there no standard software? Did every single machine sold run a unique hand-coded system without any standard software? Seriously, even if every machine was programmed from scratch without any reuse of legacy code (wait ... didn't that violate one of the claims we started from to begin with???) we might have O(50,000 l.o.c./machine) * O(20,000 machines) = O(1,000,000,000 l.o.c.). That is still far, far, far away from 200 billion! Am I missing something obvious here? Question 4: How many programmers did we need to write 200 billion lines of code? I am really not sure about this one, but if we take an average of 10 l.o.c. per day, we would need 55 million man-years to achieve this! In the time-frame of 20 to 30 years this would mean that there must have existed two to three million programmers constantly writing, testing, debugging and documenting code. That would be about as many programmers as we have in China today, wouldn't it? Question 5: What about the competition? So far, I have come up with two things here: 1) IBM had their own programming language, PL/I. Above I have assumed that the majority of code has been written exclusively using Cobol. However, all other things being equal I wonder if IBM marketing had really pushed their own development off the market in favor of Cobol on their machines. Was there really no relevant code base of PL/I? 2) Sometimes (also on this board in the thread quoted above) I come across the claim that the "200 billion lines of code" are simply invisible to anybody outside of "governments, banks ..." (and whatnot). Actually, the DoD had funded their own language in order to increase cost effectiveness and reduce the proliferation of programming language. This lead to their use of Ada. Would they really worry about having so many different programming languages if they had predominantly used Cobol? If there was any language running on "government and military" systems outside the perception of mainstream computing, wouldn't that language be Ada? I hope someone can point out any flaws in my assumptions and/or conclusions and shed some light on whether the above claim has any truth to it or not.

    Read the article

  • Android: restful API service

    - by Martyn
    Hey, I'm looking to make a service which I can use to make calls to a web based rest api. I've spent a couple of days looking through stackoverflow.com, reading books and looking at articles whilst playing about with some code and I can't get anything which I'm happy with. Basically I want to start a service on app init then I want to be able to ask that service to request a url and return the results. In the meantime I want to be able to display a progress window or something similar. I've created a service currently which uses IDL, I've read somewhere that you only really need this for cross app communication, so think these needs stripping out but unsure how to do callbacks without it. Also when I hit the post(Config.getURL("login"), values) the app seems to pause for a while (seems weird - thought the idea behind a service was that it runs on a different thread!) Currently I have a service with post and get http methods inside, a couple of AIDL files (for two way communication), a ServiceManager which deals with starting, stopping, binding etc to the service and I'm dynamically creating a Handler with specific code for the callbacks as needed. I don't want anyone to give me a complete code base to work on, but some pointers would be greatly appreciated; even if it's to say I'm doing it completely wrong. I'm pretty new to Android and Java dev so if there are any blindingly obvious mistakes here - please don't think I'm a rubbish developer, I'm just wet behind the ears and would appreciate being told exactly where I'm going wrong. Anyway, code in (mostly) full (really didn't want to put this much code here, but I don't know where I'm going wrong - apologies in advance): public class RestfulAPIService extends Service { final RemoteCallbackList<IRemoteServiceCallback> mCallbacks = new RemoteCallbackList<IRemoteServiceCallback>(); public void onStart(Intent intent, int startId) { super.onStart(intent, startId); } public IBinder onBind(Intent intent) { return binder; } public void onCreate() { super.onCreate(); } public void onDestroy() { super.onDestroy(); mCallbacks.kill(); } private final IRestfulService.Stub binder = new IRestfulService.Stub() { public void doLogin(String username, String password) { Message msg = new Message(); Bundle data = new Bundle(); HashMap<String, String> values = new HashMap<String, String>(); values.put("username", username); values.put("password", password); String result = post(Config.getURL("login"), values); data.putString("response", result); msg.setData(data); msg.what = Config.ACTION_LOGIN; mHandler.sendMessage(msg); } public void registerCallback(IRemoteServiceCallback cb) { if (cb != null) mCallbacks.register(cb); } }; private final Handler mHandler = new Handler() { public void handleMessage(Message msg) { // Broadcast to all clients the new value. final int N = mCallbacks.beginBroadcast(); for (int i = 0; i < N; i++) { try { switch (msg.what) { case Config.ACTION_LOGIN: mCallbacks.getBroadcastItem(i).userLogIn( msg.getData().getString("response")); break; default: super.handleMessage(msg); return; } } catch (RemoteException e) { } } mCallbacks.finishBroadcast(); } public String post(String url, HashMap<String, String> namePairs) {...} public String get(String url) {...} }; A couple of AIDL files: package com.something.android oneway interface IRemoteServiceCallback { void userLogIn(String result); } and package com.something.android import com.something.android.IRemoteServiceCallback; interface IRestfulService { void doLogin(in String username, in String password); void registerCallback(IRemoteServiceCallback cb); } and the service manager: public class ServiceManager { final RemoteCallbackList<IRemoteServiceCallback> mCallbacks = new RemoteCallbackList<IRemoteServiceCallback>(); public IRestfulService restfulService; private RestfulServiceConnection conn; private boolean started = false; private Context context; public ServiceManager(Context context) { this.context = context; } public void startService() { if (started) { Toast.makeText(context, "Service already started", Toast.LENGTH_SHORT).show(); } else { Intent i = new Intent(); i.setClassName("com.something.android", "com.something.android.RestfulAPIService"); context.startService(i); started = true; } } public void stopService() { if (!started) { Toast.makeText(context, "Service not yet started", Toast.LENGTH_SHORT).show(); } else { Intent i = new Intent(); i.setClassName("com.something.android", "com.something.android.RestfulAPIService"); context.stopService(i); started = false; } } public void bindService() { if (conn == null) { conn = new RestfulServiceConnection(); Intent i = new Intent(); i.setClassName("com.something.android", "com.something.android.RestfulAPIService"); context.bindService(i, conn, Context.BIND_AUTO_CREATE); } else { Toast.makeText(context, "Cannot bind - service already bound", Toast.LENGTH_SHORT).show(); } } protected void destroy() { releaseService(); } private void releaseService() { if (conn != null) { context.unbindService(conn); conn = null; Log.d(LOG_TAG, "unbindService()"); } else { Toast.makeText(context, "Cannot unbind - service not bound", Toast.LENGTH_SHORT).show(); } } class RestfulServiceConnection implements ServiceConnection { public void onServiceConnected(ComponentName className, IBinder boundService) { restfulService = IRestfulService.Stub.asInterface((IBinder) boundService); try { restfulService.registerCallback(mCallback); } catch (RemoteException e) {} } public void onServiceDisconnected(ComponentName className) { restfulService = null; } }; private IRemoteServiceCallback mCallback = new IRemoteServiceCallback.Stub() { public void userLogIn(String result) throws RemoteException { mHandler.sendMessage(mHandler.obtainMessage(Config.ACTION_LOGIN, result)); } }; private Handler mHandler; public void setHandler(Handler handler) { mHandler = handler; } } Service init and bind: // this I'm calling on app onCreate servicemanager = new ServiceManager(this); servicemanager.startService(); servicemanager.bindService(); application = (ApplicationState)this.getApplication(); application.setServiceManager(servicemanager); service function call: // this lot i'm calling as required - in this example for login progressDialog = new ProgressDialog(Login.this); progressDialog.setMessage("Logging you in..."); progressDialog.show(); application = (ApplicationState) getApplication(); servicemanager = application.getServiceManager(); servicemanager.setHandler(mHandler); try { servicemanager.restfulService.doLogin(args[0], args[1]); } catch (RemoteException e) { e.printStackTrace(); } ...later in the same file... Handler mHandler = new Handler() { public void handleMessage(Message msg) { switch (msg.what) { case Config.ACTION_LOGIN: if (progressDialog.isShowing()) { progressDialog.dismiss(); } try { ...process login results... } } catch (JSONException e) { Log.e("JSON", "There was an error parsing the JSON", e); } break; default: super.handleMessage(msg); } } }; Any and all help is greatly appreciated and I'll even buy you a coffee or a beer if you fancy :D Martyn

    Read the article

  • How can I keep a graphics object centered (like a circle) when zooming in or out on it?

    - by sonny5
    using System; using System.Drawing; using System.Collections; using System.ComponentModel; using System.Windows.Forms; using System.Data; using System.Drawing.Drawing2D; using System.Drawing.Imaging; namespace testgrfx { public class Form1 : System.Windows.Forms.Form { float m_Scalef; float m_Scalefout; Rectangle m_r1; private System.Windows.Forms.Button button2; private System.Windows.Forms.Button button3; private System.ComponentModel.Container components = null; private void InitializeComponent() { m_Scalef = 1.0f; // for zooming purposes Console.WriteLine("opening m_Scalef= {0}",m_Scalef); m_Scalefout = 1.0f; Console.WriteLine("opening m_Scalefout= {0}",m_Scalefout); m_r1 = new Rectangle(50,50,100,100); this.AutoScrollMinSize = new Size(600,700); this.components = new System.ComponentModel.Container(); this.button2 = new System.Windows.Forms.Button(); this.button2.BackColor = System.Drawing.Color.LightGray; this.button2.Location = new System.Drawing.Point(120, 30); this.button2.Name = "button2"; this.button2.Size = new System.Drawing.Size(72, 24); this.button2.TabIndex = 1; this.button2.Text = "Zoom In"; this.button2.Click += new System.EventHandler(this.mnuZoomin_Click); this.Controls.Add(button2); this.button3 = new System.Windows.Forms.Button(); this.button3.BackColor = System.Drawing.Color.LightGray; this.button3.Location = new System.Drawing.Point(200, 30); this.button3.Name = "button3"; this.button3.Size = new System.Drawing.Size(72, 24); this.button3.TabIndex = 2; this.button3.Text = "Zoom Out"; this.button3.Click += new System.EventHandler(this.mnuZoomout_Click); this.Controls.Add(button3); //InitMyForm(); } public Form1() { InitializeComponent(); Text = " DrawLine"; BackColor = SystemColors.Window; // Gotta load these kind at start-up ... not with button assignments this.Paint+=new PaintEventHandler(this.Form1_Paint); } static void Main() { Application.Run(new Form1()); } /// Clean up any resources being used. protected override void Dispose( bool disposing ) { if( disposing ) { if (components != null) { components.Dispose(); } } base.Dispose( disposing ); } // autoscroll2.cs does work private void Form1_Paint(object sender, System.Windows.Forms.PaintEventArgs e) { Graphics dc = e.Graphics; dc.PageUnit = GraphicsUnit.Pixel; dc.PageScale = m_Scalef; Console.WriteLine("opening dc.PageScale= {0}",dc.PageScale); dc.TranslateTransform(this.AutoScrollPosition.X/m_Scalef, this.AutoScrollPosition.Y/m_Scalef); Pen pn = new Pen(Color.Blue,2); dc.DrawEllipse(pn,m_r1); Console.WriteLine("form_paint_dc.PageUnit= {0}",dc.PageUnit); Console.WriteLine("form_paint_dc.PageScale= {0}",dc.PageScale); //Console.Out.NewLine = "\r\n\r\n"; // makes all double spaces } private void mnuZoomin_Click(object sender, System.EventArgs e) { m_Scalef = m_Scalef * 2.0f; Console.WriteLine("in mnuZoomin_Click m_Scalef= {0}",m_Scalef); Invalidate(); // to trigger Paint of entire client area } // try: System.Drawing.Rectangle resolution = Screen.GetWorkingArea(someForm); private void Form1_MouseDown(object sender, System.Windows.Forms.MouseEventArgs e) { // Uses the mouse wheel to scroll Graphics dc = CreateGraphics(); dc.TranslateTransform(this.AutoScrollPosition.X/m_Scalef, this.AutoScrollPosition.Y/m_Scalef); Console.WriteLine("opening Form1_MouseDown dc.PageScale= {0}", dc.PageScale); Console.WriteLine("Y wheel= {0}", this.AutoScrollPosition.Y/m_Scalef); dc.PageUnit = GraphicsUnit.Pixel; dc.PageScale = m_Scalef; Console.WriteLine("frm1_moudwn_dc.PageScale= {0}",dc.PageScale); Point [] mousep = new Point[1]; Console.WriteLine("mousep= {0}", mousep); // make sure to adjust mouse pos.for scroll position Size scrollOffset = new Size(this.AutoScrollPosition); mousep[0] = new Point(e.X-scrollOffset.Width, e.Y-scrollOffset.Height); dc.TransformPoints(CoordinateSpace.Page, CoordinateSpace.Device,mousep); Pen pen = new Pen(Color.Green,1); dc.DrawRectangle(pen,m_r1); Console.WriteLine("m_r1= {0}", m_r1); Console.WriteLine("mousep[0].X= {0}", mousep[0].X); Console.WriteLine("mousep[0].Y= {0}", mousep[0].Y); if (m_r1.Contains(new Rectangle(mousep[0].X, mousep[0].Y,1,1))) MessageBox.Show("click inside rectangle"); } private void Form1_Load(object sender, System.EventArgs e) { } private void mnuZoomout_Click(object sender, System.EventArgs e) { Console.WriteLine("first line--mnuZoomout_Click m_Scalef={0}",m_Scalef); if(m_Scalef > 9 ) { m_Scalef = m_Scalef / 2.0f; Console.WriteLine("in >9 mnuZoomout_Click m_Scalef= {0}",m_Scalef); Console.WriteLine("in >9 mnuZoomout_Click__m_Scalefout= {0}",m_Scalefout); } else { Console.WriteLine("<= 9_Zoom-out B-4 redefining={0}",m_Scalef); m_Scalef = m_Scalef * 0.5f; // make it same as previous Zoom In Console.WriteLine("<= 9_Zoom-out after m_Scalef= {0}",m_Scalef); } Invalidate(); } } // public class Form1 }

    Read the article

  • jqGrid concatinating/building html tag incorrectly

    - by Energetic Pixels
    Please excuse to length of post. But I needed to explain what I am seeing. I have a onSelectRow option that is supposed to build stacked html <li> tags (such as <li>...</li> <li>...</li> <li>...</li> ) up to the number of static xml elements that I am looking at. But my script is concatinating all the image src links together instead of building the whole listobject tag. Everything else in my jqGrid script works with exception of repeated elements inside my xml. onSelectRow: function() { var gsr = $('#searchResults').jqGrid('getGridParam', 'selrow'); if (gsr) { var data = $('#searchResults').jqGrid('getRowData', gsr); $('#thumbs ul').html('<li><a class='thumb' href='' + data.piclocation + '' title='' + data.pictitle + ''><img src='" + data.picthumb + "' alt='" + data.pictitle + "' /></a><div class='caption'><div class='image-title'>" + data.pictitle + "</div></div></li>"); };" my xml file is something like this: <photo> <pic> <asset>weaponLib/stillMedia/slides/A106.jpg</asset> <thumb>weaponLib/stillMedia/thumbs/A106.jpg</thumb> <caption>Side view of DODIC A106</caption> <title>Side view of 22 caliber long rifle ball cartridge</title> </pic> <pic> <asset>weaponLib/stillMedia/slides/A106_A.jpg</asset> <thumb>weaponLib/stillMedia/thumbs/A106_A.jpg</thumb> <caption>Side view of DODIC A106</caption> <title>Side view of 22 caliber long rifle ball cartridge</title> </pic> <pic> <asset>weaponLib/stillMedia/slides/A106_B.jpg</asset> <thumb>weaponLib/stillMedia/thumbs/A106_B.jpg</thumb> <caption>Side view of DODIC A106</caption> <title>Side view of 22 caliber long rifle ball cartridge</title> </pic> <pic> <asset>weaponLib/stillMedia/slides/A106_C.jpg</asset> <thumb>weaponLib/stillMedia/thumbs/A106_C.jpg</thumb> <caption>Side view of DODIC A106</caption> <title>Side view of 22 caliber long rifle ball cartridge</title> </pic> <pic> <asset>weaponLib/stillMedia/slides/A106_D.jpg</asset> <thumb>weaponLib/stillMedia/thumbs/A106_D.jpg</thumb> <caption>Side view of DODIC A106</caption> <title>Side view of 22 caliber long rifle ball cartridge</title> </pic> My script works fine when it only sees one sequence, but when it sees more than one it puts all html inside the tags together then for the caption and title does the same for them. It generates only one <li></li> tag set instead of 5 in the example above like I want. The <li> tags are being used by a slideshow (with thumbnails) utility. Inside firebug, I can see the object that it is built for me: <a title="Side view of 22 caliber long rifle ball cartridgeSide view of 22 caliber long rifle ball cartridgeSide view of 22 caliber long rifle ball cartridgeSide view of 22 caliber long rifle ball cartridgeSide view of 22 caliber long rifle ball cartridge" href="weaponLib/stillMedia/slides/A106.jpgweaponLib/stillMedia/slides/A106_A.jpgweaponLib/stillMedia/slides/A106_B.jpgweaponLib/stillMedia/slides/A106_C.jpgweaponLib/stillMedia/slides/A106_D.jpg" class="thumb"><img alt="Side view of 22 caliber long rifle ball cartridgeSide view of 22 caliber long rifle ball cartridgeSide view of 22 caliber long rifle ball cartridgeSide view of 22 caliber long rifle ball cartridgeSide view of 22 caliber long rifle ball cartridge" src="weaponLib/stillMedia/thumbs/A106.jpgweaponLib/stillMedia/thumbs/A106_A.jpgweaponLib/stillMedia/thumbs/A106_B.jpgweaponLib/stillMedia/thumbs/A106_C.jpgweaponLib/stillMedia/thumbs/A106_D.jpg"></a> Within jqGrid, the cell is holding: <td title="weaponLib/stillMedia/slides/A106.jpgweaponLib/stillMedia/slides/A106_A.jpgweaponLib/stillMedia/slides/A106_B.jpgweaponLib/stillMedia/slides/A106_C.jpgweaponLib/stillMedia/slides/A106_D.jpg" style="text-align: center; display: none;" role="gridcell">weaponLib/stillMedia/slides/A106.jpgweaponLib/stillMedia/slides/A106_A.jpgweaponLib/stillMedia/slides/A106_B.jpgweaponLib/stillMedia/slides/A106_C.jpgweaponLib/stillMedia/slides/A106_D.jpg</td> I know that jqGrid is building it wrong. I am double-stumped as to direction to fix it. Any suggestions would be greatly greatly appreciated. tony

    Read the article

  • Is there a way to tell Drupal not to cache a specific page?

    - by TechplexEngineer
    I have a custom php page that processes a feed of images and makes albums out of it. However whenever i add pictures to my feed, the Drupal page doesn't change until I clear the caches. Is there a way to tell Drupal not to cache that specific page? Thanks, Blake Edit: Drupal v6.15 Not exactly sure what you mean oswald, team2648.com/media is hte page. I used the php interpreter module. Here is the php code: <?php //////// CODE by Pikori Web Designs - pikori.org /////////// //////// Please do not remove this title, /////////// //////// feel free to modify or copy this software /////////// $feedURL = 'http://picasaweb.google.com/data/feed/base/user/Techplex.Engineer?alt=rss&kind=album&hl=en_US'; $photoNodeNum = 4; $galleryTitle = 'Breakaway Pictures'; $year = '2011'; ?> <?php /////////////// DO NOT EDIT ANYTHING BELOW THIS LINE ////////////////// $album = $_GET['album']; if($album != ""){ //GENERATE PICTURES $feedURL= "http://".$album."&kind=photo&hl=en_US"; $feedURL = str_replace("entry","feed",$feedURL); $sxml = simplexml_load_file($feedURL); $column = 0; $pix_count = count($sxml->channel->item); //print '<h2>'.$sxml->channel->title.'</h2>'; print '<table cellspacing="0" cellpadding="0" style="font-size:10pt" width="100%"><tr>'; for($i = 0; $i < $pix_count; $i++) { print '<td align="center">'; $entry = $sxml->channel->item[$i]; $picture_url = $entry->enclosure['url']; $time = $entry->pubDate; $time_ln = strlen($time)-14; $time = substr($time,0,$time_ln); $description = $entry->description; $tn_beg = strpos($description, "src="); $tn_end = strpos($description, "alt="); $tn_length = $tn_end - $tn_beg; $tn = substr($description, $tn_beg, $tn_length); $tn_small = str_replace("s288","s128",$tn); $picture_url = $tn; $picture_beg = strpos($picture_url,"http:"); $picture_len = strlen($picture_url)-7; $picture_url = substr($tn, $picture_beg, $picture_len); $picture_url = str_replace("s288","s640",$picture_url); print '<a rel="lightbox[group]" href="'.$picture_url.'">'; print '<img '.$tn_small.' style="border:1px solid #02293a"><br>'; print '</a></td> '; if($column == 4){ print '</tr><tr>'; $column = 0;} else $column++; } print '</table>'; print '<br><center><a href="media">Return to album</a></center>'; } else { //GENERATE ALBUMS $sxml = simplexml_load_file($feedURL); $column = 0; $album_count = count($sxml->channel->item); //print '<h2>'.$galleryTitle.'</h2>'; print '<table cellspacing="0" cellpadding="0" style="font-size:10pt" width="100%"><tr>'; for($i = 0; $i < $album_count; $i++) { $entry = $sxml->channel->item[$i]; $time = $entry->pubDate; $time_ln = strlen($time)-14; $time = substr($time,0,$time_ln); $description = $entry->description; $tn_beg = strpos($description, "src="); $tn_end = strpos($description, "alt="); $tn_length = $tn_end - $tn_beg; $tn = substr($description, $tn_beg, $tn_length); $albumrss = $entry->guid; $albumrsscount = strlen($albumrss) - 7; $albumrss = substr($albumrss, 7, $albumrsscount); $search = strstr($time, $year); if($search != FALSE || $year == ''){ print '<td valign="top">'; print '<a href="/node/'.$photoNodeNum.'?album='.$albumrss.'">'; print '<center><img '.$tn.' style="border:3px double #cccccc"><br>'; print $entry->title.'<br>'.$time.'</center>'; print '</a><br></td> '; if($column == 3){ print '</tr><tr>'; $column = 0; } else { $column++; } } } print '</table>'; } ?>

    Read the article

  • JTabbedPane: only first tab is drawn, the second is always empty (newbie Q)

    - by paul
    I created a very simple JTabbedPane by first creating an empty JTabbedPane object, then 2 JPanels that I later add. Each JPanel is holding a object that extends JButton and implements MouseListener. Each of these holds a different image loaded from a file; the image is held locally as a buffered image and as an image icon, etc., all of which works great. The point of all that is to allow resizing of the image when the button is resized (using getscaledinstance()), because the panel is resized, because the JTabbedPane is resized, etc., within the JFrame that holds everything. I override paintComponent() to accomplish this in the class that extends JButton. I am using MigLayout Manager, and all is well on that front controlling layout constraints, growing, filling, initial sizes, preferred sizes, etc. The images the buttons hold are of different sizes and proportions, but this caused no trouble before. Up until 2 days ago everything worked fairly well. I made some changes trying to tweak some resizing issues as I was picking up MigLayout manager. At the time I was playing around with setting various min, max, and preferred sizes using the methods provided for by the components, not the layout manager. I also fooled a bit with pack(), validate(), visible(), opaque() etc., and yes I read the article about Swing and AWT painting here: http://java.sun.com/products/jfc/tsc/articles/painting/ , and I switched to relying more and more on MigLayout. On an unrelated note, it appears JFrame's do not honor maxsize? Somehow, today, with and without using any of these methods provided by swing, with or without using MigLayout manager to handle some of these matters instead, I now have a JTabbedPane that correctly displays the FIRST JPanel I add, but NOT THE SECOND JPanel--which, while present as a tab--does not show when selected. I have switched the order of which panel is added first, and this still holds true regardless of which JPanel I add first, telling me the JPanels are ok, and the problem is most likely in the JTabbedPane. I click on the second tab, the JTabbedPane switches, but I have what appears to be a blank button in the JPanel. A few console system-out statements reveal the following: a) that the second panel and its button are constructed b) no mouse events are being captured when I click on where the second panel and button should reside, as if it didn't exist at that point; c) when I switch to the second tab, the overrided paintComponent() method of the button within that second JPanel is never called, so it is in fact never being painted despite the tab in which it resides becoming visible; d) the JTabbpedPane getComponentCount() returns a correct value of 2 after adding the 2nd panel; e) MigLayout manager actually rocks, but I digress... I cannot now revert to my older code, and despite my best efforts to undo whatever changes caused this, I cannot fix my new problem. I've commented out everything but the most essential calls: constructors for each object--with MigLayout; add() for placing the buttons on the panels using string-arguments appropriate for MigLayout; add() for placing the panels on the JTabbedPane, also with MigLayout string arguments; setting the default op on close for the JFrame; and setting the JFrame visible. This means I do not fiddle with optimization settings, double buffering settings, opaque settings, but leave them as default, and still, no fix; the second panel will not show itself. Each panel, I should add, when it is the first to be loaded, works fine, again re-affirming that the panels and buttons are themselves ok. Here is part of what I am doing: //Note: BuildaButton is a class that merely constructs my instances File f = new File("/foo.jpg"); button1 = new BuildaButton().BuildaButton(f).buildfoo1Button(); f = new File("/foo2.jpg"); button2 = new BuildaButton().BuildaButton(f).buildfoo2Button(); MigLayout ml = new MigLayout("wrap 1", "[fill, grow]0[fill, grow]", "[fill, grow]0[fill, grow]"); MigLayout ml2 = new MigLayout("wrap 2", "[fill, grow]5[fill, grow]", "[fill, grow]0[fill, grow]"); foo1panel = new JPanel(ml); foo1panel.add(button1, "w 234:945:, h 200:807:"); foo2panel = new JPanel(ml); foo2panel.add(button2, "w 186:752:, h 200:807:"); tabs.add("foo1", foo1panel); tabs.add("foo2", foo2panel); System.out.println("contents of tabs: " + tabs.getComponentCount() + " elements"); mainframe.setLayout(ml2); mainframe.setMinimumSize(new Dimension(850,800)); mainframe.add(tabs, "w 600:800:, h 780:780:"); //controlpanel is a still blank jpanel that holds nothing--it is a space holder for now & will be utilized mainframe.add(controlpanel, "w 200:200:200, h 780:780:"); mainframe.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); mainframe.setVisible(true); Thank you in advance for any help you can give.

    Read the article

  • Optimizing sorting container of objects with heap-allocated buffers - how to avoid hard-copying buff

    - by Kache4
    I was making sure I knew how to do the op= and copy constructor correctly in order to sort() properly, so I wrote up a test case. After getting it to work, I realized that the op= was hard-copying all the data_. I figure if I wanted to sort a container with this structure (its elements have heap allocated char buffer arrays), it'd be faster to just swap the pointers around. Is there a way to do that? Would I have to write my own sort/swap function? #include <deque> //#include <string> //#include <utility> //#include <cstdlib> #include <cstring> #include <iostream> //#include <algorithm> // I use sort(), so why does this still compile when commented out? #include <boost/filesystem.hpp> #include <boost/foreach.hpp> using namespace std; namespace fs = boost::filesystem; class Page { public: // constructor Page(const char* path, const char* data, int size) : path_(fs::path(path)), size_(size), data_(new char[size]) { // cout << "Creating Page..." << endl; strncpy(data_, data, size); // cout << "done creating Page..." << endl; } // copy constructor Page(const Page& other) : path_(fs::path(other.path())), size_(other.size()), data_(new char[other.size()]) { // cout << "Copying Page..." << endl; strncpy(data_, other.data(), size_); // cout << "done copying Page..." << endl; } // destructor ~Page() { delete[] data_; } // accessors const fs::path& path() const { return path_; } const char* data() const { return data_; } int size() const { return size_; } // operators Page& operator = (const Page& other) { if (this == &other) return *this; char* newImage = new char[other.size()]; strncpy(newImage, other.data(), other.size()); delete[] data_; data_ = newImage; path_ = fs::path(other.path()); size_ = other.size(); return *this; } bool operator < (const Page& other) const { return path_ < other.path(); } private: fs::path path_; int size_; char* data_; }; class Book { public: Book(const char* path) : path_(fs::path(path)) { cout << "Creating Book..." << endl; cout << "pushing back #1" << endl; pages_.push_back(Page("image1.jpg", "firstImageData", 14)); cout << "pushing back #3" << endl; pages_.push_back(Page("image3.jpg", "thirdImageData", 14)); cout << "pushing back #2" << endl; pages_.push_back(Page("image2.jpg", "secondImageData", 15)); cout << "testing operator <" << endl; cout << pages_[0].path().string() << (pages_[0] < pages_[1]? " < " : " > ") << pages_[1].path().string() << endl; cout << pages_[1].path().string() << (pages_[1] < pages_[2]? " < " : " > ") << pages_[2].path().string() << endl; cout << pages_[0].path().string() << (pages_[0] < pages_[2]? " < " : " > ") << pages_[2].path().string() << endl; cout << "sorting" << endl; BOOST_FOREACH (Page p, pages_) cout << p.path().string() << endl; sort(pages_.begin(), pages_.end()); cout << "done sorting\n"; BOOST_FOREACH (Page p, pages_) cout << p.path().string() << endl; cout << "checking datas" << endl; BOOST_FOREACH (Page p, pages_) { char data[p.size() + 1]; strncpy((char*)&data, p.data(), p.size()); data[p.size()] = '\0'; cout << p.path().string() << " " << data << endl; } cout << "done Creating Book" << endl; } private: deque<Page> pages_; fs::path path_; }; int main() { Book* book = new Book("/some/path/"); }

    Read the article

  • Android SQLiteConstraintException: error code 19: constraint failed

    - by Tom D
    I've seen other questions about this exception, but all of them seem to be resolved with the solution that a row with the primary key specified already exists. This doesn't seem to be the case for me. I have tried replacing all single quotes in my strings with double quotes, but the same problem occurs. I'm trying to insert a row into the Settings table of the SQLite database I've created by doing the following: db.execSQL("DROP TABLE IF EXISTS "+Settings.SETTINGS_TABLE_NAME + ";"); db.execSQL(CREATE_MEDIA_TABLE); db.execSQL(CREATE_SETTINGS_TABLE); Cursor c = getAllSettings(); //If there isn't already a settings row, create a row full of defaults if(c.getCount()==0){ ContentValues cv = new ContentValues(); cv.put(Settings.SETTING_UNIQUE_ID, "'"+Settings.uniqueID+"'"); cv.put(Settings.SETTING_DEVICE_ID, Settings.SETTING_DEVICE_ID_DEFAULT); cv.put(Settings.SETTING_CONNECTION_PREFERENCE, Settings.SETTING_CONNECTION_PREFERENCE_DEFAULT); cv.put(Settings.SETTING_AD_HOC_ENABLED, Settings.SETTING_AD_HOC_ENABLED_DEFAULT); cv.put(Settings.SETTING_SERVER_ADDRESS, Settings.SETTING_SERVER_ADDRESS_DEFAULT); cv.put(Settings.SETTING_RECORDING_MODE, Settings.SETTING_RECORDING_MODE_DEFAULT); cv.put(Settings.SETTING_PREVIEW_ENABLED, Settings.SETTING_PREVIEW_ENABLED_DEFAULT); cv.put(Settings.SETTING_PICTURE_RESOLUTION_X, Settings.SETTING_PICTURE_RESOLUTION_X_DEFAULT); cv.put(Settings.SETTING_PICTURE_RESOLUTION_Y, Settings.SETTING_PICTURE_RESOLUTION_Y_DEFAULT); cv.put(Settings.SETTING_VIDEO_RESOLUTION_X, Settings.SETTING_VIDEO_RESOLUTION_X_DEFAULT); cv.put(Settings.SETTING_VIDEO_RESOLUTION_Y, Settings.SETTING_VIDEO_RESOLUTION_Y_DEFAULT); cv.put(Settings.SETTING_VIDEO_FPS, Settings.SETTING_VIDEO_FPS_DEFAULT); cv.put(Settings.SETTING_AUDIO_BITRATE_KBPS, Settings.SETTING_AUDIO_BITRATE_KBPS_DEFAULT); cv.put(Settings.SETTING_STORE_TO_SD, Settings.SETTING_STORE_TO_SD_DEFAULT); cv.put(Settings.SETTING_STORAGE_LIMIT_MB, Settings.SETTING_STORAGE_LIMIT_MB_DEFAULT); this.db.insert(Settings.SETTINGS_TABLE_NAME, null, cv); } The CREATE_SETTINGS_TABLE string is defined as the following: private static String CREATE_SETTINGS_TABLE = "CREATE TABLE IF NOT EXISTS " + Settings.SETTINGS_TABLE_NAME + "(" + Settings.SETTING_UNIQUE_ID + " TEXT NOT NULL PRIMARY KEY, " + Settings.SETTING_DEVICE_ID + " TEXT NOT NULL , " + Settings.SETTING_CONNECTION_PREFERENCE + " TEXT NOT NULL CHECK("+Settings.SETTING_CONNECTION_PREFERENCE+" IN("+Settings.SETTING_CONNECTION_PREFERENCE_ALLOWED+")), " + Settings.SETTING_AD_HOC_ENABLED + " TEXT NOT NULL CHECK("+Settings.SETTING_AD_HOC_ENABLED+" IN("+Settings.SETTING_AD_HOC_ENABLED_ALLOWED+")), " + Settings.SETTING_SERVER_ADDRESS + " TEXT NOT NULL, " + Settings.SETTING_RECORDING_MODE + " TEXT NOT NULL CHECK("+Settings.SETTING_RECORDING_MODE+" IN("+Settings.SETTING_RECORDING_MODE_ALLOWED+")), " + Settings.SETTING_PREVIEW_ENABLED + " TEXT NOT NULL CHECK("+Settings.SETTING_PREVIEW_ENABLED+" IN("+Settings.SETTING_PREVIEW_ENABLED_ALLOWED+")), " + Settings.SETTING_PICTURE_RESOLUTION_X + " TEXT NOT NULL, " + Settings.SETTING_PICTURE_RESOLUTION_Y + " TEXT NOT NULL, " + Settings.SETTING_VIDEO_RESOLUTION_X + " TEXT NOT NULL, " + Settings.SETTING_VIDEO_RESOLUTION_Y + " TEXT NOT NULL, " + Settings.SETTING_VIDEO_FPS + " TEXT NOT NULL, " + Settings.SETTING_AUDIO_BITRATE_KBPS + " TEXT NOT NULL, " + Settings.SETTING_STORE_TO_SD + " TEXT NOT NULL CHECK("+Settings.SETTING_STORE_TO_SD+" IN("+Settings.SETTING_STORE_TO_SD_ALLOWED+")), " + Settings.SETTING_STORAGE_LIMIT_MB + " TEXT NOT NULL )"; However, when I execute my insert, I always get: 03-19 19:37:36.974: ERROR/Database(386): Error inserting server_address='0.0.0.0' storage_limit='-1' connection='none' preview_enabled='0' sd_enabled='1' video_fps='15' audio_bitrate='96' device_id='-1' recording_mode='none' picture_resolution_x='-1' picture_resolution_y='-1' unique_id='000000000000000' adhoc_enable='0' video_resolution_x='320' video_resolution_y='240' 03-19 19:45:34.284: ERROR/Database(446): android.database.sqlite.SQLiteConstraintException: error code 19: constraint failed It seems as if all the columns in my insert are not null. The row's primary key HAS to be unique, because it's the only row in the table. Therefore, the only thing I can think of is my CHECK conditions aren't true. Here are the predefined strings I'm using: public static final String SETTING_UNIQUE_ID = "unique_id"; public static final String SETTING_DEVICE_ID = "device_id"; public static final String SETTING_DEVICE_ID_DEFAULT = "'-1'"; public static final String SETTING_CONNECTION_PREFERENCE = "connection"; public static final String SETTING_CONNECTION_PREFERENCE_3G = "'3g'"; public static final String SETTING_CONNECTION_PREFERENCE_WIFI = "'wifi'"; public static final String SETTING_CONNECTION_PREFERENCE_NONE = "'none'"; public static final String SETTING_CONNECTION_PREFERENCE_ALLOWED = SETTING_CONNECTION_PREFERENCE_3G+","+SETTING_CONNECTION_PREFERENCE_WIFI+","+SETTING_CONNECTION_PREFERENCE_NONE; public static final String SETTING_CONNECTION_PREFERENCE_DEFAULT = SETTING_CONNECTION_PREFERENCE_NONE; public static final String SETTING_AD_HOC_ENABLED = "adhoc_enable"; public static final String SETTING_AD_HOC_ENABLED_ALLOWED = TRUE+","+FALSE; public static final String SETTING_AD_HOC_ENABLED_DEFAULT = FALSE; public static final String SETTING_SERVER_ADDRESS = "server_address"; public static final String SETTING_SERVER_ADDRESS_DEFAULT = "'0.0.0.0'"; public static final String SETTING_RECORDING_MODE = "recording_mode"; public static final String SETTING_RECORDING_MODE_VIDEO = "'video'"; public static final String SETTING_RECORDING_MODE_AUDIO = "'audio'"; public static final String SETTING_RECORDING_MODE_PICTURE = "'picture'"; public static final String SETTING_RECORDING_MODE_NONE = "'none'"; public static final String SETTING_RECORDING_MODE_ALLOWED = SETTING_RECORDING_MODE_VIDEO+","+SETTING_RECORDING_MODE_AUDIO+","+SETTING_RECORDING_MODE_PICTURE+","+SETTING_RECORDING_MODE_NONE; public static final String SETTING_RECORDING_MODE_DEFAULT = SETTING_RECORDING_MODE_NONE; public static final String SETTING_PREVIEW_ENABLED = "preview_enabled"; public static final String SETTING_PREVIEW_ENABLED_ALLOWED = TRUE+","+FALSE; public static final String SETTING_PREVIEW_ENABLED_DEFAULT = FALSE; public static final String SETTING_PICTURE_RESOLUTION_X = "picture_resolution_x"; public static final String SETTING_PICTURE_RESOLUTION_X_DEFAULT = "'-1'"; public static final String SETTING_PICTURE_RESOLUTION_Y = "picture_resolution_y"; public static final String SETTING_PICTURE_RESOLUTION_Y_DEFAULT = "'-1'"; public static final String SETTING_VIDEO_RESOLUTION_X = "video_resolution_x"; public static final String SETTING_VIDEO_RESOLUTION_X_DEFAULT = "'320'"; public static final String SETTING_VIDEO_RESOLUTION_Y = "video_resolution_y"; public static final String SETTING_VIDEO_RESOLUTION_Y_DEFAULT = "'240'"; public static final String SETTING_VIDEO_FPS = "video_fps"; public static final String SETTING_VIDEO_FPS_DEFAULT = "'15'"; public static final String SETTING_AUDIO_BITRATE_KBPS = "audio_bitrate"; public static final String SETTING_AUDIO_BITRATE_KBPS_DEFAULT = "'96'"; public static final String SETTING_STORE_TO_SD = "sd_enabled"; public static final String SETTING_STORE_TO_SD_ALLOWED = TRUE+","+FALSE; public static final String SETTING_STORE_TO_SD_DEFAULT = TRUE; public static final String SETTING_STORAGE_LIMIT_MB = "storage_limit"; public static final String SETTING_STORAGE_LIMIT_MB_DEFAULT = "'-1'"; public static final String SETTING_CLIP_LENGTH_SECONDS = "clip_length"; public static final String SETTING_CLIP_LENGTH_SECONDS_DEFAULT = "'300'"; Does anyone see what could be going on? I'm stumped. Thanks in advance.

    Read the article

  • PHP statements, HTML and RSS

    - by poindexter
    Alrighty, I've got another little bit of code that I'm wrestling through. I'm building a conditional sidebar. The goal is to only show blog related stuff when posts in the "blog" category are being viewed. I've got part of it working, but the part where I'm trying to bring in an RSS feed of the category into the sidebar to show as recent posts. It doesn't work, and since I'm a php newb I'm not entirely sure why. Any suggestions or pointers are much appreciated. I'll post the problem section first, and then the entire php file second, so you all can see the context for the section that I'm having issues with. Problem Section: echo '<div class="panel iq-news">'; echo '<h4><span><a href="/category/blog/feed"><img src="/wp-content/themes/iq/images/rss-icon.gif" alt="Subscribe to our feed"/></a></span>IQNavigator Blog</h4>'; <?php query_posts('category_name=Blog&showposts=2'); if (have_posts()) : ?> echo '<ul>'; <?php while (have_posts()) : the_post(); ?> echo '<li><a href="<?php the_permalink();?>"><?php the_title();?> </a></li>'; <?php endwhile;?> echo '</ul>'; <?php endif;?> echo '<div class="twitter">'; echo '<p id="twitter-updates">'; <?php twitter_updates();?> echo '</p>'; echo '<p class="text-center"><a href="http://twitter.com/iqnavigator">Follow us on twitter</a></p>'; echo '</div>'; echo '</div>'; The whole darn long statement, for context reasons: <div class="sidebar"> <?php if (!is_search() && !is_page('Our Clients') && !is_archive()){ if($post->post_parent) { $children = wp_list_pages("title_li=&child_of=".$post->post_parent."&echo=0&depth=1&exclude=85,87,89,181,97,184"); } else { $children = wp_list_pages("title_li=&child_of=".$post->ID."&echo=0&depth=1&exclude=85,87,89,181,97,184"); } if ($children) { ?> <div class="panel links subnav"> <h3>In This Section</h3> <ul class="subnav"> <?php echo $children; ?> </ul> <p>&nbsp;</p> </div> <?php } } if(is_page('Our Clients') || in_category('Our Clients') || is_category('Our Clients')) { echo '<div class="panel links subnav">'; echo '<h3>In This Section</h3>'; echo '<ul class="subnav">'; wp_list_categories('child_of=21&title_li='); echo '</ul>'; echo '<p>&nbsp;</p>'; echo '</div>'; } else if (in_category('Blog')) { //PUT YOUR CODE HERE // echo get_page_content(34); echo '<div class="panel featured-resource">'; echo '<h4>Blog Contributors</h4>'; echo '<ul class"subnav">'; echo '<li><a href="/company/executive-team/john-f-martin/">John Martin</a></li>'; echo '<li><a href="/company/executive-team/kieran-brady/">Kieran Brady</a></li>'; echo '<li><a href="/company/executive-team/art-knapp/">Art Knapp</a></li>'; echo '</ul>'; echo '</div>'; echo '<div class="panel iq-news">'; echo '<h4><span><a href="/category/blog/feed"><img src="/wp-content/themes/iq/images/rss-icon.gif" alt="Subscribe to our feed"/></a></span>IQNavigator Blog</h4>'; <?php query_posts('category_name=Blog&showposts=2'); if (have_posts()) : ?> echo '<ul>'; <?php while (have_posts()) : the_post(); ?> echo '<li><a href="<?php the_permalink();?>"><?php the_title();?> </a></li>'; <?php endwhile;?> echo '</ul>'; <?php endif;?> echo '<div class="twitter">'; echo '<p id="twitter-updates">'; <?php twitter_updates();?> echo '</p>'; echo '<p class="text-center"><a href="http://twitter.com/iqnavigator">Follow us on twitter</a></p>'; echo '</div>'; echo '</div>'; //END CODE HERE } if (!is_page('Resources')) { ?> <div class="panel featured-resource"> <h4>Featured Resource</h4> <div class="embed"> <?php $custom_fields = get_post_custom(); $featured_video_code = $custom_fields['Featured Video Code']; if($featured_video_code) { foreach ( $featured_video_code as $key => $value ) { $the_code = $value; } $featured_video_link = $custom_fields['Featured Video Link']; foreach ( $featured_video_link as $key => $value ) { $the_link = $value; } $featured_video_text = $custom_fields['Featured Video Text']; foreach ( $featured_video_text as $key => $value ) { $the_text = $value; } if($the_code) { echo $the_code; } if($the_text) { echo '<ul>'; echo '<li>'; if($the_link) { echo '<a href="' . $the_link . '" class="video" target="_blank">' . $the_text . '</a>'; } else { echo $the_text; } echo '</li>'; echo '</ul>'; } } ?> + Visit Resource Center <div class="clr"></div> <div class="blue-bars"> <a href="<?php bloginfo('template_directory');?>/more-info.php" class="more-info" rel="facebox">Request More Info</a> <a href="<?php bloginfo('template_directory');?>/resource-form.php?id=701000000009E" class="view-demos" rel="facebox">Schedule a Demo</a> </div> </div> <div id="content">

    Read the article

  • Is it possible to pass a structure of delegates from managed to native?

    - by Veiva
    I am writing a wrapper for the game programming library "Allegro" and its less stable 4.9 branch. Now, I have done good insofar, except for when it comes to wrapping a structure of function pointers. Basically, I can't change the original code, despite having access to it, because that would require me to fork it in some manner. I need to know how I can somehow pass a structure of delegates from managed to native without causing an AccessViolationException that has occurred so far. Now, for the code. Here is the Allegro definition of the structure: typedef struct ALLEGRO_FILE_INTERFACE { AL_METHOD(ALLEGRO_FILE*, fi_fopen, (const char *path, const char *mode)); AL_METHOD(void, fi_fclose, (ALLEGRO_FILE *handle)); AL_METHOD(size_t, fi_fread, (ALLEGRO_FILE *f, void *ptr, size_t size)); AL_METHOD(size_t, fi_fwrite, (ALLEGRO_FILE *f, const void *ptr, size_t size)); AL_METHOD(bool, fi_fflush, (ALLEGRO_FILE *f)); AL_METHOD(int64_t, fi_ftell, (ALLEGRO_FILE *f)); AL_METHOD(bool, fi_fseek, (ALLEGRO_FILE *f, int64_t offset, int whence)); AL_METHOD(bool, fi_feof, (ALLEGRO_FILE *f)); AL_METHOD(bool, fi_ferror, (ALLEGRO_FILE *f)); AL_METHOD(int, fi_fungetc, (ALLEGRO_FILE *f, int c)); AL_METHOD(off_t, fi_fsize, (ALLEGRO_FILE *f)); } ALLEGRO_FILE_INTERFACE; My simple attempt at wrapping it: public delegate IntPtr AllegroInternalOpenFileDelegate(string path, string mode); public delegate void AllegroInternalCloseFileDelegate(IntPtr file); public delegate int AllegroInternalReadFileDelegate(IntPtr file, IntPtr data, int size); public delegate int AllegroInternalWriteFileDelegate(IntPtr file, IntPtr data, int size); public delegate bool AllegroInternalFlushFileDelegate(IntPtr file); public delegate long AllegroInternalTellFileDelegate(IntPtr file); public delegate bool AllegroInternalSeekFileDelegate(IntPtr file, long offset, int where); public delegate bool AllegroInternalIsEndOfFileDelegate(IntPtr file); public delegate bool AllegroInternalIsErrorFileDelegate(IntPtr file); public delegate int AllegroInternalUngetCharFileDelegate(IntPtr file, int c); public delegate long AllegroInternalFileSizeDelegate(IntPtr file); [StructLayout(LayoutKind.Sequential, Pack = 0)] public struct AllegroInternalFileInterface { [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalOpenFileDelegate fi_fopen; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalCloseFileDelegate fi_fclose; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalReadFileDelegate fi_fread; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalWriteFileDelegate fi_fwrite; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalFlushFileDelegate fi_fflush; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalTellFileDelegate fi_ftell; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalSeekFileDelegate fi_fseek; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalIsEndOfFileDelegate fi_feof; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalIsErrorFileDelegate fi_ferror; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalUngetCharFileDelegate fi_fungetc; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalFileSizeDelegate fi_fsize; } I have a simple auxiliary wrapper that turns an ALLEGRO_FILE_INTERFACE into an ALLEGRO_FILE, like so: #define ALLEGRO_NO_MAGIC_MAIN #include <allegro5/allegro5.h> #include <stdlib.h> #include <string.h> #include <assert.h> __declspec(dllexport) ALLEGRO_FILE * al_aux_create_file(ALLEGRO_FILE_INTERFACE * fi) { ALLEGRO_FILE * file; assert(fi && "`fi' null"); file = (ALLEGRO_FILE *)malloc(sizeof(ALLEGRO_FILE)); if (!file) return NULL; file->vtable = (ALLEGRO_FILE_INTERFACE *)malloc(sizeof(ALLEGRO_FILE_INTERFACE)); if (!(file->vtable)) { free(file); return NULL; } memcpy(file->vtable, fi, sizeof(ALLEGRO_FILE_INTERFACE)); return file; } __declspec(dllexport) void al_aux_destroy_file(ALLEGRO_FILE * f) { assert(f && "`f' null"); assert(f->vtable && "`f->vtable' null"); free(f->vtable); free(f); } Lastly, I have a class that accepts a Stream and provides the proper methods to interact with the stream. Just to make sure, here it is: /// <summary> /// A semi-opaque data type that allows one to load fonts, etc from a stream. /// </summary> public class AllegroFile : AllegroResource, IDisposable { AllegroInternalFileInterface fileInterface; Stream fileStream; /// <summary> /// Gets the file interface. /// </summary> internal AllegroInternalFileInterface FileInterface { get { return fileInterface; } } /// <summary> /// Constructs an Allegro file from the stream provided. /// </summary> /// <param name="stream">The stream to use.</param> public AllegroFile(Stream stream) { fileStream = stream; fileInterface = new AllegroInternalFileInterface(); fileInterface.fi_fopen = Open; fileInterface.fi_fclose = Close; fileInterface.fi_fread = Read; fileInterface.fi_fwrite = Write; fileInterface.fi_fflush = Flush; fileInterface.fi_ftell = GetPosition; fileInterface.fi_fseek = Seek; fileInterface.fi_feof = GetIsEndOfFile; fileInterface.fi_ferror = GetIsError; fileInterface.fi_fungetc = UngetCharacter; fileInterface.fi_fsize = GetLength; Resource = AllegroFunctions.al_aux_create_file(ref fileInterface); if (!IsValid) throw new AllegroException("Unable to create file"); } /// <summary> /// Disposes of all resources. /// </summary> ~AllegroFile() { Dispose(); } /// <summary> /// Disposes of all resources used. /// </summary> public void Dispose() { if (IsValid) { Resource = IntPtr.Zero; // Should call AllegroFunctions.al_aux_destroy_file fileStream.Dispose(); } } IntPtr Open(string path, string mode) { return IntPtr.Zero; } void Close(IntPtr file) { fileStream.Close(); } int Read(IntPtr file, IntPtr data, int size) { byte[] d = new byte[size]; int read = fileStream.Read(d, 0, size); Marshal.Copy(d, 0, data, size); return read; } int Write(IntPtr file, IntPtr data, int size) { byte[] d = new byte[size]; Marshal.Copy(data, d, 0, size); fileStream.Write(d, 0, size); return size; } bool Flush(IntPtr file) { fileStream.Flush(); return true; } long GetPosition(IntPtr file) { return fileStream.Position; } bool Seek(IntPtr file, long offset, int whence) { SeekOrigin origin = SeekOrigin.Begin; if (whence == 1) origin = SeekOrigin.Current; else if (whence == 2) origin = SeekOrigin.End; fileStream.Seek(offset, origin); return true; } bool GetIsEndOfFile(IntPtr file) { return fileStream.Position == fileStream.Length; } bool GetIsError(IntPtr file) { return false; } int UngetCharacter(IntPtr file, int character) { return -1; } long GetLength(IntPtr file) { return fileStream.Length; } } Now, when I do something like this: AllegroFile file = new AllegroFile(new FileStream("Test.bmp", FileMode.Create, FileAccess.ReadWrite)); bitmap.SaveToFile(file, ".bmp"); ...I get an AccessViolationException. I think I understand why (the garbage collector can relocate structs and classes whenever), but I'd think that the method stub that is created by the framework would take this into consideration and route the calls to the valid classes. However, it seems obviously so that I'm wrong. So basically, is there any way I can successfully wrap that structure? (And I'm sorry for all the code! Hope it's not too much...)

    Read the article

  • jQuery Validation plugin: prompt for override

    - by Sam Carleton
    I have a jQuery form that has validation of a sort. It is a data entry screen with two 'recommend ranges', one is 36-84, the other 50-300. The business rules call for the values to be either blank or greater than zero, but to prompt for confirmation if the values are outside of the range listed above. I have seen some other threads that talk about setting the class="cancel" on the submit button. From what I can tell, this will simply disable the validation. I need to prompt for a "do you want to continue, yes or no?" and if no stop the submit, if yes, continue. Below is an example from the book Pro jQuery. By default the top row needs to be between 10 and 20 to submit. How would you change it so that it prompts you and if you say Yes it submits, no prevents the submit: <!DOCTYPE html> <html> <head> <title>Example</title> <script src="jquery-1.7.js" type="text/javascript"></script> <script src="jquery.tmpl.js" type="text/javascript"></script> <script src="jquery.validate.js" type="text/javascript"></script> <style type="text/css"> h1 { min-width: 70px; border: thick double black; margin-left: auto; margin-right: auto; text-align: center; font-size: x-large; padding: .5em; color: darkgreen; background-image: url("border.png"); background-size: contain; margin-top: 0; } .dtable {display: table;} .drow {display: table-row;} .dcell {display: table-cell; padding: 10px;} .dcell > * {vertical-align: middle} input {width: 2em; text-align: right; border: thin solid black; padding: 2px;} label {width: 5em; padding-left: .5em; display: inline-block;} #buttonDiv {text-align: center;} #oblock {display: block; margin-left: auto; margin-right: auto; min-width: 700px; } div.errorMsg {color: red} .invalidElem {border: medium solid red} </style> <script type="text/javascript"> $(document).ready(function() { var data = [ { name: "Astor", product: "astor", stocklevel: "10", price: "2.99"}, { name: "Daffodil", product: "daffodil", stocklevel: "12", price: "1.99"}, { name: "Rose", product: "rose", stocklevel: "2", price: "4.99"}, { name: "Peony", product: "peony", stocklevel: "0", price: "1.50"}, { name: "Primula", product: "primula", stocklevel: "1", price: "3.12"}, { name: "Snowdrop", product: "snowdrop", stocklevel: "15", price: "0.99"}, ]; var templResult = $('#flowerTmpl').tmpl(data); templResult.slice(0, 3).appendTo('#row1'); templResult.slice(3).appendTo("#row2"); $('form').validate({ highlight: function(element, errorClass) { $(element).add($(element).parent()).addClass("invalidElem"); }, unhighlight: function(element, errorClass) { $(element).add($(element).parent()).removeClass("invalidElem"); }, errorElement: "div", errorClass: "errorMsg" }); $.validator.addClassRules({ flowerValidation: { required: true, min: 0, max: 100, digits: true, } }) $('#row1 input').each(function(index, elem) { $(elem).rules("add", { min: 10, max: 20 }) }); $('input').addClass("flowerValidation").change(function(e) { $('form').validate().element($(e.target)); }); }); </script> <script id="flowerTmpl" type="text/x-jquery-tmpl"> <div class="dcell"> <img src="${product}.png"/> <label for="${product}">${name}: </label> <input name="${product}" value="0" required /> </div> </script> </head> <body> <h1>Jacqui's Flower Shop</h1> <form method="post" action="http://node.jacquisflowershop.com/order"> <div id="oblock"> <div class="dtable"> <div id="row1" class="drow"> </div> <div id="row2"class="drow"> </div> </div> </div> <div id="buttonDiv"><button type="submit">Place Order</button></div> </form> </body> </html>

    Read the article

  • Little more help with writing a o buffer with libjpeg

    - by Richard Knop
    So I have managed to find another question discussing how to use the libjpeg to compress an image to jpeg. I have found this code which is supposed to work: Compressing IplImage to JPEG using libjpeg in OpenCV Here's the code (it compiles ok): /* This a custom destination manager for jpeglib that enables the use of memory to memory compression. See IJG documentation for details. */ typedef struct { struct jpeg_destination_mgr pub; /* base class */ JOCTET* buffer; /* buffer start address */ int bufsize; /* size of buffer */ size_t datasize; /* final size of compressed data */ int* outsize; /* user pointer to datasize */ int errcount; /* counts up write errors due to buffer overruns */ } memory_destination_mgr; typedef memory_destination_mgr* mem_dest_ptr; /* ------------------------------------------------------------- */ /* MEMORY DESTINATION INTERFACE METHODS */ /* ------------------------------------------------------------- */ /* This function is called by the library before any data gets written */ METHODDEF(void) init_destination (j_compress_ptr cinfo) { mem_dest_ptr dest = (mem_dest_ptr)cinfo->dest; dest->pub.next_output_byte = dest->buffer; /* set destination buffer */ dest->pub.free_in_buffer = dest->bufsize; /* input buffer size */ dest->datasize = 0; /* reset output size */ dest->errcount = 0; /* reset error count */ } /* This function is called by the library if the buffer fills up I just reset destination pointer and buffer size here. Note that this behavior, while preventing seg faults will lead to invalid output streams as data is over- written. */ METHODDEF(boolean) empty_output_buffer (j_compress_ptr cinfo) { mem_dest_ptr dest = (mem_dest_ptr)cinfo->dest; dest->pub.next_output_byte = dest->buffer; dest->pub.free_in_buffer = dest->bufsize; ++dest->errcount; /* need to increase error count */ return TRUE; } /* Usually the library wants to flush output here. I will calculate output buffer size here. Note that results become incorrect, once empty_output_buffer was called. This situation is notified by errcount. */ METHODDEF(void) term_destination (j_compress_ptr cinfo) { mem_dest_ptr dest = (mem_dest_ptr)cinfo->dest; dest->datasize = dest->bufsize - dest->pub.free_in_buffer; if (dest->outsize) *dest->outsize += (int)dest->datasize; } /* Override the default destination manager initialization provided by jpeglib. Since we want to use memory-to-memory compression, we need to use our own destination manager. */ GLOBAL(void) jpeg_memory_dest (j_compress_ptr cinfo, JOCTET* buffer, int bufsize, int* outsize) { mem_dest_ptr dest; /* first call for this instance - need to setup */ if (cinfo->dest == 0) { cinfo->dest = (struct jpeg_destination_mgr *) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, sizeof (memory_destination_mgr)); } dest = (mem_dest_ptr) cinfo->dest; dest->bufsize = bufsize; dest->buffer = buffer; dest->outsize = outsize; /* set method callbacks */ dest->pub.init_destination = init_destination; dest->pub.empty_output_buffer = empty_output_buffer; dest->pub.term_destination = term_destination; } /* ------------------------------------------------------------- */ /* MEMORY SOURCE INTERFACE METHODS */ /* ------------------------------------------------------------- */ /* Called before data is read */ METHODDEF(void) init_source (j_decompress_ptr dinfo) { /* nothing to do here, really. I mean. I'm not lazy or something, but... we're actually through here. */ } /* Called if the decoder wants some bytes that we cannot provide... */ METHODDEF(boolean) fill_input_buffer (j_decompress_ptr dinfo) { /* we can't do anything about this. This might happen if the provided buffer is either invalid with regards to its content or just a to small bufsize has been given. */ /* fail. */ return FALSE; } /* From IJG docs: "it's not clear that being smart is worth much trouble" So I save myself some trouble by ignoring this bit. */ METHODDEF(void) skip_input_data (j_decompress_ptr dinfo, INT32 num_bytes) { /* There might be more data to skip than available in buffer. This clearly is an error, so screw this mess. */ if ((size_t)num_bytes > dinfo->src->bytes_in_buffer) { dinfo->src->next_input_byte = 0; /* no buffer byte */ dinfo->src->bytes_in_buffer = 0; /* no input left */ } else { dinfo->src->next_input_byte += num_bytes; dinfo->src->bytes_in_buffer -= num_bytes; } } /* Finished with decompression */ METHODDEF(void) term_source (j_decompress_ptr dinfo) { /* Again. Absolute laziness. Nothing to do here. Boring. */ } GLOBAL(void) jpeg_memory_src (j_decompress_ptr dinfo, unsigned char* buffer, size_t size) { struct jpeg_source_mgr* src; /* first call for this instance - need to setup */ if (dinfo->src == 0) { dinfo->src = (struct jpeg_source_mgr *) (*dinfo->mem->alloc_small) ((j_common_ptr) dinfo, JPOOL_PERMANENT, sizeof (struct jpeg_source_mgr)); } src = dinfo->src; src->next_input_byte = buffer; src->bytes_in_buffer = size; src->init_source = init_source; src->fill_input_buffer = fill_input_buffer; src->skip_input_data = skip_input_data; src->term_source = term_source; /* IJG recommend to use their function - as I don't know **** about how to do better, I follow this recommendation */ src->resync_to_restart = jpeg_resync_to_restart; } All I need to do is replace the jpeg_stdio_dest in my program with this code: int numBytes = 0; //size of jpeg after compression char * storage = new char[150000]; //storage buffer JOCTET *jpgbuff = (JOCTET*)storage; //JOCTET pointer to buffer jpeg_memory_dest(&cinfo,jpgbuff,150000,&numBytes); So I need some help to incorporate the above four lines into this function which now works but writes to a file instead of a memory: int write_jpeg_file( char *filename ) { struct jpeg_compress_struct cinfo; struct jpeg_error_mgr jerr; /* this is a pointer to one row of image data */ JSAMPROW row_pointer[1]; FILE *outfile = fopen( filename, "wb" ); if ( !outfile ) { printf("Error opening output jpeg file %s\n!", filename ); return -1; } cinfo.err = jpeg_std_error( &jerr ); jpeg_create_compress(&cinfo); jpeg_stdio_dest(&cinfo, outfile); /* Setting the parameters of the output file here */ cinfo.image_width = width; cinfo.image_height = height; cinfo.input_components = bytes_per_pixel; cinfo.in_color_space = color_space; /* default compression parameters, we shouldn't be worried about these */ jpeg_set_defaults( &cinfo ); /* Now do the compression .. */ jpeg_start_compress( &cinfo, TRUE ); /* like reading a file, this time write one row at a time */ while( cinfo.next_scanline < cinfo.image_height ) { row_pointer[0] = &raw_image[ cinfo.next_scanline * cinfo.image_width * cinfo.input_components]; jpeg_write_scanlines( &cinfo, row_pointer, 1 ); } /* similar to read file, clean up after we're done compressing */ jpeg_finish_compress( &cinfo ); jpeg_destroy_compress( &cinfo ); fclose( outfile ); /* success code is 1! */ return 1; } Anybody could help me out a bit with it? I've tried meddling with it but I am not sure how to do it. I I just replace this line: jpeg_stdio_dest(&cinfo, outfile); It's not going to work. There is more stuff that needs to be changed a bit in that function and I am being a little lost from all those pointers and memory management.

    Read the article

  • if isset PHP not working?

    - by Ellie
    Okay, Im trying to set a captcha up, However with this code in, it breaks. if(isset($_POST["captcha"])) if($_SESSION["captcha"]==$_POST["captcha"]) When i do it with out it, the page works, but the captcha is letting incorrect submits through. Parse error: syntax error, unexpected '"', expecting T_STRING or T_VARIABLE or T_NUM_STRING in /hermes/waloraweb085/b2027/moo.lutarinet/jointest.php on line 71 <?php $pagetitle = "Home"; $checkrank = 0; include ($_SERVER['DOCUMENT_ROOT'].'/header.inc.php'); ECHO <<<END <br><br> <b><center><i><u>DO NOT</u> USE YOUR NEOPETS PASSWORD OR PIN NUMBER!!!</b></i></center> <p> ?> <?php session_start() ?> <center><P><FORM ACTION="join.pro.php" enctype="multipart/form-data" METHOD=POST> <table width="393" height="188" border="0" cellpadding="0" cellspacing="0"> <td width="150">Username</td> <td width="243"><input type=text name="name" value="" size=32 maxlength=15></td> </tr> <tr> <td>Password</td> <td><input type=password name="pass1" VALUE="" maxlength=15></td> </tr> <tr> <td>Confirm Password</td> <td><input type=password name="pass2" VALUE="" size=32 maxlength=15></td> </tr> <tr> <td>Security Code (4 Diget Number)</td> <td><input type=password name="security" VALUE="" size=32 maxlength=4></td> </tr> <tr> <td>Email Address</td> <td><INPUT TYPE=text NAME="email" VALUE="" SIZE=32 maxlength=100></td> </tr> <tr> <td height="41" colspan="2" valign="middle"><p><p><center> By registering an account here you agree to all of our <A HREF="$baseurl/tos.php">Terms and Conditions</A>. You can also view our <A HREF="$baseurl/privacy.php">Privacy Policy</A>. </center></p></td> </tr> <tr><td align="center">CAPTCHA:<br> (antispam code, 3 black symbols)<br> <table><tr><td><img src="captcha.php" alt="captcha image"></td><td><input type="text" name="captcha" size="3" maxlength="3"></td></tr></table> </td></tr> <td height="27" colspan="2" valign="middle"> <center><input type=submit name=Submit value="Register"></center> </td> </table> </form> <?php if(isset($_POST["captcha"])) if($_SESSION["captcha"]==$_POST["captcha"]) { //CAPTHCA is valid; proceed the message: save to database, send by e-mail ... echo 'CAPTHCA is valid; proceed the message'; } else { echo 'CAPTHCA is not valid; ignore submission'; } ?> <?php END; include ($_SERVER['DOCUMENT_ROOT'].'/footer.inc.php'); ?> captcha.php <?php session_start(); header("Expires: Mon, 26 Jul 1997 05:00:00 GMT"); header("Last-Modified: " . gmdate("D, d M Y H:i:s") . " GMT"); header("Cache-Control: no-store, no-cache, must-revalidate"); header("Cache-Control: post-check=0, pre-check=0", false); header("Pragma: no-cache"); function _generateRandom($length=6) { $_rand_src = array( array(48,57) //digits , array(97,122) //lowercase chars // , array(65,90) //uppercase chars ); srand ((double) microtime() * 1000000); $random_string = ""; for($i=0;$i<$length;$i++){ $i1=rand(0,sizeof($_rand_src)-1); $random_string .= chr(rand($_rand_src[$i1][0],$_rand_src[$i1][1])); } return $random_string; } $im = @imagecreatefromjpeg("http://sketchedneo.com/images/sitedesigns/captcha.jpg"); $rand = _generateRandom(3); $_SESSION['captcha'] = $rand; ImageString($im, 5, 2, 2, $rand[0]." ".$rand[1]." ".$rand[2]." ", ImageColorAllocate ($im, 0, 0, 0)); $rand = _generateRandom(3); ImageString($im, 5, 2, 2, " ".$rand[0]." ".$rand[1]." ".$rand[2], ImageColorAllocate ($im, 255, 0, 0)); Header ('Content-type: image/jpeg'); imagejpeg($im,NULL,100); ImageDestroy($im); ?> Help please anyone? Line 71: if(isset($_POST["captcha"])) Line 72: if($_SESSION["captcha"]==$_POST["captcha"])

    Read the article

  • Application crashing when talking to oracle unless executable path contains spaces

    - by Lasse V. Karlsen
    We have an x-files problem with our .NET application. Or, rather, hybrid Win32 and .NET application. When it attempts to communicate with Oracle, it just dies. Vanishes. Goes to the big black void in the sky. No event log message, no exception, no nothing. If we simply ask the application to talk to a MS SQL Server instead, which has the effect of replacing the usage of OracleConnection and related classes with SqlConnection and related classes, it works as expected. Today we had a breakthrough. For some reason, a customer had figured out that by placing all the application files in a directory on his desktop, it worked as expected with Oracle as well. Moving the directory down to the root of the drive, or in C:\Temp or, well, around a bit, made the crash reappear. Basically it was 100% reproducable that the application worked if run from directory on desktop, and failed if run from directory in root. Today we figured out that the difference that counted was wether there was a space in the directory name or not. So, these directories would work: C:\Program Files\AppDir\Executable.exe C:\Temp Lemp\AppDir\Executable.exe C:\Documents and Settings\someuser\Desktop\AppDir\Executable.exe whereas these would not: C:\CompanyName\AppDir\Executable.exe C:\Programfiler\AppDir\Executable.exe <-- Program Files in norwegian C:\Temp\AppDir\Executable.exe I'm hoping someone reading this has seen similar behavior and have a "aha, you need to twiddle the frob on the oracle glitz driver configuration" or similar. Anyone? Followup #1: Ok, I've processed the procmon output now, both files from when I hit the button that attempts to open the window that triggers the cascade failure, and I've noticed that they keep track mostly, there's some smallish differences near the top of both files, and they they keep track a long way down. However, when one run fails, the other keeps going and the next few lines of the log output are these: ReadFile C:\oracle\product\10.2.0\db_1\BIN\orageneric10.dll SUCCESS Offset: 274 432, Length: 32 768, I/O Flags: Non-cached, Paging I/O, Synchronous Paging I/O ReadFile C:\oracle\product\10.2.0\db_1\BIN\orageneric10.dll SUCCESS Offset: 233 472, Length: 32 768, I/O Flags: Non-cached, Paging I/O, Synchronous Paging I/O After this, the working run continues to execute, and the other touches the mscorwks.dll files a few times before threads close down and the app closes. Thus, the failed run does not touch the above files. Followup #2: Figured I'd try to upgrade the oracle client drivers, but 10.2.0.1 is apparently the highest version available for Windows 2003 server and XP clients. Followup #3: Well, we've ended up with a black-box solution. Basically we found that the problem is somewhere related to XPO and Oracle. XPO has a system-table it manages, called XPObjectType, with three columns: Oid, TypeName and AssemblyName. Due to how Oracle is configured in the databases we talk to, the column names were OID, TYPENAME and ASSEMBLYNAME. This would ordinarily not be a problem, except that XPO talks to the schema information directly and checks if the table is there with the right column names, and XPO doesn't handle case differences so it sees a XPObjectType table with three unknown columns and none of those it expects. Exactly what XPO does now I don't really know, but if I dropped this table, and recreated it with the right case, using double quotes around all the column names to get the case right, the problem doesn't crop up. Exactly where the space in the folder name comes into this, I still have no idea, but this problem had two tiers: Stop the application from crashing at our customers, short-term solution Fix the bug, long-term solution Right now tier 1 is solved, tier 2 will be put back into the queue for now and prioritized. We're facing some bigger changes to our data tier anyway so this might not be a problem we need to solve, at least if all our Oracle-customers verify that the table-fix actually gets rid of the problem. I'll accept the answer by Dave Markle since though Process Monitor (the big brother of File Monitor) didn't actually pinpoint the problem, I was able to use it to determine that after my breakpoint in user-code where XPO had built up the query for this table, no I/O happened until all the entries for the application closing down was logged, which led me to believe it was this table that was the culprit, or at least influenced the problem somehow. If I manage to get to the real cause of this, I'll update the post.

    Read the article

  • passing multiple queries to view with codeigniter

    - by LvS
    I am trying to build a forum with Codeigniter. So far i have the forums themselves displayed and the threads displayed, based on the creating dynamic news tutorial. But that is 2 different pages, i need to obviously display them into one page, like this: Forum 1 - thread 1 - thread 2 - thread 3 Forum 2 - thread 1 - thread 2 etc. And then the next step is obviously to display all the posts in a thread. Most likely with some pagination going on. But that is for later. For now i have the forum controller (slimmed version): <?php class Forum extends CI_Controller { public function __construct() { parent::__construct(); $this->load->model('forum_model'); $this->lang->load('forum'); $this->lang->load('dutch'); } public function index() { $data['forums'] = $this->forum_model->get_forums(); $data['title'] = $this->lang->line('title'); $data['view'] = $this->lang->line('view'); $this->load->view('templates/header', $data); $this->load->view('forum/index', $data); $this->load->view('templates/footer'); } public function view($slug) { $data['forum_item'] = $this->forum_model->get_forums($slug); if (empty($data['forum_item'])) { show_404(); } $data['title'] = $data['forum_item']['title']; $this->load->view('templates/header', $data); $this->load->view('forum/view', $data); $this->load->view('templates/footer'); } } ?> And the forum_model (also slimmed down) <?php class Forum_model extends CI_Model { public function __construct() { $this->load->database(); } public function get_forums($slug = FALSE) { if ($slug === FALSE) { $query= $this->db->get('forum'); return $query->result_array(); } $query = $this->db->get_where('forum', array('slug' => $slug)); return $query->row_array(); } public function get_threads($forumid, $limit, $offset) { $query = $this->db->get_where('thread', array('forumid', $forumid), $limit, $offset); return $query->result_array(); } } ?> And the view file <?php foreach ($forums as $forum_item): ?> <h2><?=$forum_item['title']?></h2> <div id="main"> <?=$forum_item['description']?> </div> <p><a href="forum/<?php echo $forum_item['slug'] ?>"><?=$view?></a></p> <?php endforeach ?> Now that last one, i would like to have something like this: <?php foreach ($forums as $forum_item): ?> <h2><?=$forum_item['title']?></h2> <div id="main"> <?=$forum_item['description']?> </div> <?php foreach ($threads as $thread_item): ?> <h2><?php echo $thread_item['title'] ?></h2> <p><a href="thread/<?php echo $thread_item['slug'] ?>"><?=$view?></a></p> <?php endforeach ?> <?php endforeach ?> But the question is, how do i get the model to return like a double query to the view, so that it contains both the forums and the threads within each forum. I tried to make a foreach loop in the get_forum function, but when i do this: public function get_forums($slug = FALSE) { if ($slug === FALSE) { $query= $this->db->get('forum'); foreach ($query->row_array() as $forum_item) { $thread_query=$this->get_threads($forum_item->forumid, 50, 0); } return $query->result_array(); } $query = $this->db->get_where('forum', array('slug' => $slug)); return $query->row_array(); } i get the error A PHP Error was encountered Severity: Notice Message: Trying to get property of non-object Filename: models/forum_model.php Line Number: 16 I hope anyone has some good tips, thanks! Lenny *EDIT*** Thanks for the feedback. I have been puzzling and this seems to work now :) $query= $this->db->get('forum'); foreach ($query->result() as $forum_item) { $forum[$forum_item->forumid]['title']=$forum_item->title; $thread_query=$this->db->get_where('thread', array('forumid' => $forum_item->forumid), 20, 0); foreach ($thread_query->result() as $thread_item) { $forum[$forum_item->forumid]['thread'][]=$thread_item->title; } } return $forum; } What is now next, is how to display this multidimensional array in the view, with foreach statements.... Any suggestions ? Thanks

    Read the article

  • Java RMI cannot connect to host from external client.

    - by Koe
    I've been using RMI in this project for a while. I've gotten the client program to connect (amongst other things) to the server when running it over my LAN, however when running it over the internet I'm running into the following exception: java.rmi.ConnectException: Connection refused to host: (private IP of host machine); nested exception is: java.net.ConnectException: Connection timed out: connect at sun.rmi.transport.tcp.TCPEndpoint.newSocket(Unknown Source) at sun.rmi.transport.tcp.TCPChannel.createConnection(Unknown Source) at sun.rmi.transport.tcp.TCPChannel.newConnection(Unknown Source) at sun.rmi.server.UnicastRef.invoke(Unknown Source) at java.rmi.server.RemoteObjectInvocationHandler.invokeRemoteMethod(Unknown Source) at java.rmi.server.RemoteObjectInvocationHandler.invoke(Unknown Source) at $Proxy1.ping(Unknown Source) at client.Launcher$PingLabel.runPing(Launcher.java:366) at client.Launcher$PingLabel.<init>(Launcher.java:353) at client.Launcher.setupContentPane(Launcher.java:112) at client.Launcher.<init>(Launcher.java:99) at client.Launcher.main(Launcher.java:59) Caused by: java.net.ConnectException: Connection timed out: connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(Unknown Source) at java.net.PlainSocketImpl.connectToAddress(Unknown Source) at java.net.PlainSocketImpl.connect(Unknown Source) at java.net.SocksSocketImpl.connect(Unknown Source) at java.net.Socket.connect(Unknown Source) at java.net.Socket.connect(Unknown Source) at java.net.Socket.<init>(Unknown Source) at java.net.Socket.<init>(Unknown Source) at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(Unknown Source) at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(Unknown Source) ... 12 more This error is remeniscent of my early implementation of RMI and I can obtain the error verbatum if I run the client locally without the server program running as well. To me Connection Timed Out means a problem with the server's response. Here's the client initiation: public static void main(String[] args) { try { String host = "<WAN IP>"; Registry registry = LocateRegistry.getRegistry(host, 1099); Login lstub = (Login) registry.lookup("Login Server"); Information istub = (Information) registry.lookup("Game Server"); new Launcher(istub, lstub); } catch (RemoteException e) { System.err.println("Client exception: " + e.toString()); e.printStackTrace(); } catch (NotBoundException e) { System.err.println("Client exception: " + e.toString()); e.printStackTrace(); } } Interestingly enough no Remote Exception is thrown here. Here's the server initiation: public static void main(String args[]) { try { GameServer gobj = new GameServer(); Information gstub = (Information) UnicastRemoteObject.exportObject( gobj, 1099); Registry registry = LocateRegistry.createRegistry(1099); registry.bind("Game Server", gstub); LoginServer lobj = new LoginServer(gobj); Login lstub = (Login) UnicastRemoteObject.exportObject(lobj, 7099); // Bind the remote object's stub in the registry registry.bind("Login Server", lstub); System.out.println("Server ready"); } catch (Exception e) { System.err.println("Server exception: " + e.toString()); e.printStackTrace(); } } Bad practice with the catch(Exception e) I know but bear with me. Up to this stage I know it works fine over the LAN, here's where the exception occurs over the WAN and is the first place a method in the server is called: private class PingLabel extends JLabel { private static final long serialVersionUID = 1L; public PingLabel() { super(""); runPing(); } public void setText(String text) { super.setText("Ping: " + text + "ms"); } public void runPing() { try { PingThread pt = new PingThread(); gameServer.ping(); pt.setRecieved(true); setText("" + pt.getTime()); } catch (RemoteException e) { e.printStackTrace(); } } } That's a label placed on the launcher as a ping test. the method ping(), in gameserver does nothing, as in is a null method. It's worth noting also that ports 1099 and 7099 are forwarded to the server machine (which should be obvious from the stack trace). Can anyone see anyting I'm missing/doing wrong? If you need any more information just ask. EDIT: I'm practically certain the problem has nothing to do with my router settings. When disabling my port forwarding settings I get a slightly different error: Client exception: java.rmi.ConnectException: Connection refused to host: (-WAN IP NOT LOCAL IP-); but it appears both on the machine locally connected to the server and on the remote machine. In addition, I got it to work seamlessly when connecting the server straight tho the modem (cutting out the router. I can only conclude the problem is in my router's settings but can't see where (I've checked and double checked the port forwarding page). That's the only answer i can come up with.

    Read the article

  • How to make negate_unary work with any type?

    - by Chan
    Hi, Following this question: How to negate a predicate function using operator ! in C++? I want to create an operator ! can work with any functor that inherited from unary_function. I tried: template<typename T> inline std::unary_negate<T> operator !( const T& pred ) { return std::not1( pred ); } The compiler complained: Error 5 error C2955: 'std::unary_function' : use of class template requires template argument list c:\program files\microsoft visual studio 10.0\vc\include\xfunctional 223 1 Graphic Error 7 error C2451: conditional expression of type 'std::unary_negate<_Fn1>' is illegal c:\program files\microsoft visual studio 10.0\vc\include\ostream 529 1 Graphic Error 3 error C2146: syntax error : missing ',' before identifier 'argument_type' c:\program files\microsoft visual studio 10.0\vc\include\xfunctional 222 1 Graphic Error 4 error C2065: 'argument_type' : undeclared identifier c:\program files\microsoft visual studio 10.0\vc\include\xfunctional 222 1 Graphic Error 2 error C2039: 'argument_type' : is not a member of 'std::basic_ostream<_Elem,_Traits>::sentry' c:\program files\microsoft visual studio 10.0\vc\include\xfunctional 222 1 Graphic Error 6 error C2039: 'argument_type' : is not a member of 'std::basic_ostream<_Elem,_Traits>::sentry' c:\program files\microsoft visual studio 10.0\vc\include\xfunctional 230 1 Graphic Any idea? Update Follow "templatetypedef" solution, I got new error: Error 3 error C2831: 'operator !' cannot have default parameters c:\visual studio 2010 projects\graphic\graphic\main.cpp 39 1 Graphic Error 2 error C2808: unary 'operator !' has too many formal parameters c:\visual studio 2010 projects\graphic\graphic\main.cpp 39 1 Graphic Error 4 error C2675: unary '!' : 'is_prime' does not define this operator or a conversion to a type acceptable to the predefined operator c:\visual studio 2010 projects\graphic\graphic\main.cpp 52 1 Graphic Update 1 Complete code: #include <iostream> #include <functional> #include <utility> #include <cmath> #include <algorithm> #include <iterator> #include <string> #include <boost/assign.hpp> #include <boost/assign/std/vector.hpp> #include <boost/assign/std/map.hpp> #include <boost/assign/std/set.hpp> #include <boost/assign/std/list.hpp> #include <boost/assign/std/stack.hpp> #include <boost/assign/std/deque.hpp> struct is_prime : std::unary_function<int, bool> { bool operator()( int n ) const { if( n < 2 ) return 0; if( n == 2 || n == 3 ) return 1; if( n % 2 == 0 || n % 3 == 0 ) return 0; int upper_bound = std::sqrt( static_cast<double>( n ) ); for( int pf = 5, step = 2; pf <= upper_bound; ) { if( n % pf == 0 ) return 0; pf += step; step = 6 - step; } return 1; } }; /* template<typename T> inline std::unary_negate<T> operator !( const T& pred, typename T::argument_type* dummy = 0 ) { return std::not1<T>( pred ); } */ inline std::unary_negate<is_prime> operator !( const is_prime& pred ) { return std::not1( pred ); } template<typename T> inline void print_con( const T& con, const std::string& ms = "", const std::string& sep = ", " ) { std::cout << ms << '\n'; std::copy( con.begin(), con.end(), std::ostream_iterator<typename T::value_type>( std::cout, sep.c_str() ) ); std::cout << "\n\n"; } int main() { using namespace boost::assign; std::vector<int> nums; nums += 1, 3, 5, 7, 9; nums.erase( remove_if( nums.begin(), nums.end(), !is_prime() ), nums.end() ); print_con( nums, "After remove all primes" ); } Thanks, Chan Nguyen

    Read the article

  • C++ Program performs better when piped

    - by ET1 Nerd
    I haven't done any programming in a decade. I wanted to get back into it, so I made this little pointless program as practice. The easiest way to describe what it does is with output of my --help codeblock: ./prng_bench --help ./prng_bench: usage: ./prng_bench $N $B [$T] This program will generate an N digit base(B) random number until all N digits are the same. Once a repeating N digit base(B) number is found, the following statistics are displayed: -Decimal value of all N digits. -Time & number of tries taken to randomly find. Optionally, this process is repeated T times. When running multiple repititions, averages for all N digit base(B) numbers are displayed at the end, as well as total time and total tries. My "problem" is that when the problem is "easy", say a 3 digit base 10 number, and I have it do a large number of passes the "total time" is less when piped to grep. ie: command ; command |grep took : ./prng_bench 3 10 999999 ; ./prng_bench 3 10 999999|grep took .... Pass# 999999: All 3 base(10) digits = 3 base(10). Time: 0.00005 secs. Tries: 23 It took 191.86701 secs & 99947208 tries to find 999999 repeating 3 digit base(10) numbers. An average of 0.00019 secs & 99 tries was needed to find each one. It took 159.32355 secs & 99947208 tries to find 999999 repeating 3 digit base(10) numbers. If I run the same command many times w/o grep time is always VERY close. I'm using srand(1234) for now, to test. The code between my calls to clock_gettime() for start and stop do not involve any stream manipulation, which would obviously affect time. I realize this is an exercise in futility, but I'd like to know why it behaves this way. Below is heart of the program. Here's a link to the full source on DB if anybody wants to compile and test. https://www.dropbox.com/s/6olqnnjf3unkm2m/prng_bench.cpp clock_gettime() requires -lrt. for (int pass_num=1; pass_num<=passes; pass_num++) { //Executes $passes # of times. clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &temp_time); //get time start_time = timetodouble(temp_time); //convert time to double, store as start_time for(i=1, tries=0; i!=0; tries++) { //loops until 'comparison for' fully completes. counts reps as 'tries'. <------------ for (i=0; i<Ndigits; i++) //Move forward through array. | results[i]=(rand()%base); //assign random num of base to element (digit). | /*for (i=0; i<Ndigits; i++) //---Debug Lines--------------- | std::cout<<" "<<results[i]; //---a LOT of output.---------- | std::cout << "\n"; //---Comment/decoment to disable/enable.*/ // | for (i=Ndigits-1; i>0 && results[i]==results[0]; i--); //Move through array, != element breaks & i!=0, new digits drawn. -| } //If all are equal i will be 0, nested for condition satisfied. -| clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &temp_time); //get time draw_time = (timetodouble(temp_time) - start_time); //convert time to dbl, subtract start_time, set draw_time to diff. total_time += draw_time; //add time for this pass to total. total_tries += tries; //add tries for this pass to total. /*Formated output for each pass: Pass# ---: All -- base(--) digits = -- base(10) Time: ----.---- secs. Tries: ----- (LINE) */ std::cout<<"Pass# "<<std::setw(width_pass)<<pass_num<<": All "<<Ndigits<<" base("<<base<<") digits = " <<std::setw(width_base)<<results[0]<<" base(10). Time: "<<std::setw(width_time)<<draw_time <<" secs. Tries: "<<tries<<"\n"; } if(passes==1) return 0; //No need for totals and averages of 1 pass. /* It took ----.---- secs & ------ tries to find --- repeating -- digit base(--) numbers. (LINE) An average of ---.---- secs & ---- tries was needed to find each one. (LINE)(LINE) */ std::cout<<"It took "<<total_time<<" secs & "<<total_tries<<" tries to find " <<passes<<" repeating "<<Ndigits<<" digit base("<<base<<") numbers.\n" <<"An average of "<<total_time/passes<<" secs & "<<total_tries/passes <<" tries was needed to find each one. \n\n"; return 0;

    Read the article

  • Create a class that inherets DrawableGameComponent in XNA as a CLASS with custom functions

    - by user3675013
    using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Media; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Content; namespace TileEngine { class Renderer : DrawableGameComponent { public Renderer(Game game) : base(game) { } SpriteBatch spriteBatch ; protected override void LoadContent() { base.LoadContent(); } public override void Draw(GameTime gameTime) { base.Draw(gameTime); } public override void Update(GameTime gameTime) { base.Update(gameTime); } public override void Initialize() { base.Initialize(); } public RenderTarget2D new_texture(int width, int height) { Texture2D TEX = new Texture2D(GraphicsDevice, width, height); //create the texture to render to RenderTarget2D Mine = new RenderTarget2D(GraphicsDevice, width, height); GraphicsDevice.SetRenderTarget(Mine); //set the render device to the reference provided //maybe base.draw can be used with spritebatch. Idk. We'll see if the order of operation //works out. Wish I could call base.draw here. return Mine; //I'm hoping that this returns the same instance and not a copy. } public void draw_texture(int width, int height, RenderTarget2D Mine) { GraphicsDevice.SetRenderTarget(null); //Set the renderer to render to the backbuffer again Rectangle drawrect = new Rectangle(0, 0, width, height); //Set the rendering size to what we want spriteBatch.Begin(); //This uses spritebatch to draw the texture directly to the screen spriteBatch.Draw(Mine, drawrect, Color.White); //This uses the color white spriteBatch.End(); //ends the spritebatch //Call base.draw after this since it doesn't seem to recognize inside the function //maybe base.draw can be used with spritebatch. Idk. We'll see if the order of operation //works out. Wish I could call base.draw here. } } } I solved a previous issue where I wasn't allowed to access GraphicsDevice outside the main Default 'main' class Ie "Game" or "Game1" etc. Now I have a new issue. FYi no one told me that it would be possible to use GraphicsDevice References to cause it to not be null by using the drawable class. (hopefully after this last bug is solved it doesn't still return null) Anyways at present the problem is that I can't seem to get it to initialize as an instance in my main program. Ie Renderer tileClipping; and I'm unable to use it such as it is to be noted i haven't even gotten to testing these two steps below but before it compiled but when those functions of this class were called it complained that it can't render to a null device. Which meant that the device wasn't being initialized. I had no idea why. It took me hours to google this. I finally figured out the words I needed.. which were "do my rendering in XNA in a seperate class" now I haven't used the addcomponent function because I don't want it to only run these functions automatically and I want to be able to call the custom ones. In a nutshell what I want is: *access to rendering targets and graphics device OUTSIDE default class *passing of Rendertarget2D (which contain textures and textures should automatically be passed with a rendering target? ) *the device should be passed to this function as well OR the device should be passed to this function as a byproduct of passing the rendertarget (which is automatically associated with the render device it was given originally) *I'm assuming I'm dealing with abstracted pointers here so when I pass a class object or instance, I should be recieving the SAME object , I referenced, and not a copy that has only the lifespan of the function running. *the purpose for all these options: I want to initialize new 2d textures on the fly to customize tileclipping and even the X , y Offsets of where a WHOLE texture will be rendered, and the X and Y offsets of where tiles will be rendered ON that surface. This is why. And I'll be doing region based lighting effects per tile or even per 8X8 pixel spaces.. we'll see I'll also be doing sprite rotations on the whole texture then copying it again to a circular masked texture, and then doing a second copy for only solid tiles for masked rotated collisions on sprites. I'll be checking the masked pixels for my collision, and using raycasting possibly to check for collisions on those areas. The sprite will stay in the center, when this rotation happens. Here is a detailed diagram: http://i.stack.imgur.com/INf9K.gif I'll be using texture2D for steps 4-6 I suppose for steps 1 as well. Now ontop of that, the clipping size (IE the sqaure rendered) will be able to be shrunk or increased, on a per frame basis Therefore I can't use the same static size for my main texture2d and I can't use just the backbuffer Or we get the annoying flicker. Also I will have multiple instances of the renderer class so that I can freely pass textures around as if they are playing cards (in a sense) layering them ontop of eachother, cropping them how i want and such. and then using spritebatch to simply draw them at the locations I want. Hopefully this makes sense, and yes I will be planning on using alpha blending but only after all tiles have been drawn.. The masked collision is important and Yes I am avoiding using math on the tile rendering and instead resorting to image manipulation in video memory which is WHY I need this to work the way I'm intending it to work and not in the default way that XNA seems to handle graphics. Thanks to anyone willing to help. I hate the code form offered, because then I have to rely on static presence of an update function. What if I want to kill that update function or that object, but have it in memory, but just have it temporarily inactive? I'm making the assumption here the update function of one of these gamecomponents is automatic ? Anyways this is as detailed as I can make this post hopefully someone can help me solve the issue. Instead of tell me "derrr don't do it this wayyy" which is what a few people told me (but they don't understand the actual goal I have in mind) I'm trying to create basically a library where I can copy images freely no matter the size, i just have to specify the size in the function then as long as a reference to that object exists it should be kept alive? right? :/ anyways.. Anything else? I Don't know. I understand object oriented coding but I don't understand this XNA It's beggining to feel impossible to do anything custom in it without putting ALL my rendering code into the draw function of the main class tileClipping.new_texture(GraphicsDevice, width, height) tileClipping.Draw_texture(...)

    Read the article

  • How to delete object with a mouse click ?

    - by Meko
    Hi all. I made a simple FlowChat Editor that creates rectangles and triangles and connects them to each other and shows the way from up to down. I can move this elements on screen too. I am now trying to create a button to delete the element which I clicked. There is problem that I can delete MyTriangle objects, but I can't delete MyRectangle objects. It deletes but not object which I clicked. I delete from first object to last. Here is my code: if (deleteObj) { if (rectsList.size() != 0) { for (int i = 0; i < rectsList.size(); i++) { MyRect rect = (MyRect) rectsList.get(i); if (e.getX() <= rect.c.x + 50 && e.getX() >= rect.c.x - 50 && e.getY() <= rect.c.y + 15 && e.getY() >= rect.c.y - 15) { rectsList.remove(rect); System.out.println("This is REctangle DELETED\n"); } } } if (triangleList.size() != 0) { for (int j = 0; j < triangleList.size(); j++) { MyTriangle trian = (MyTriangle) triangleList.get(j); if (e.getX() <= trian.c.x + 20 && e.getX() >= trian.c.x - 20 && e.getY() <= trian.c.y + 20 && e.getY() >= trian.c.y - 20) { triangleList.remove(trian); System.out.println("This is Triangle Deleted\n"); } } } Edit Here MyRectangle and MyTriangle classes public class MyRect extends Ellipse2D.Double { Point c; Point in; Point out; int posX; int posY; int width = 100; int height = 30; int count; public MyRect(Point center, Point input, Point output,int counter) { c = center; in = input; out = output; count=counter; } void drawMe(Graphics g) { // in.x=c.x+20; int posX = c.x; int posY = c.y; int posInX = in.x; int posInY = in.y; int posOutX = out.x; int posOutY = out.y; g.setColor(Color.MAGENTA); g.drawString(" S "+count ,posX-5, posY+5); g.setColor(Color.black); g.drawRect(posX-50, posY-15, width, height); g.setColor(Color.green); g.drawRect(posInX-3, posInY-9, 6, 6); g.setColor(Color.blue); g.drawRect(posOutX-3, posOutY+3, 6, 6); } } public class MyTriangle { Point c; Point in ; Point outYES ; Point outNO ; int posX; int posY; int count; public MyTriangle(Point center,Point input,Point outputYES,Point outputNO,int counter) { c = center; in = input; outYES = outputYES; outNO = outputNO; count=counter; } void drawMe(Graphics g) { int posX = c.x; int posY = c.y; int posInX=in.x; int posInY=in.y; int posOutYESX=outYES.x; int posOutYESY=outYES.y; int posOutNOX=outNO.x; int posOutNOY=outNO.y; int[] xPoints = {posX - 50, posX, posX + 50, posX}; int[] yPoints = {posY, posY - 30, posY, posY + 30}; g.setColor(Color.MAGENTA); g.drawString(" T "+count,posX-5, posY+5); g.setColor(Color.black); g.drawPolygon(xPoints, yPoints, 4); // draw input g.setColor(Color.green); g.drawRect(posInX-3,posInY-9, 6, 6); g.setColor(Color.blue); g.drawRect(posOutYESX-9,posOutYESY-3 , 6, 6); g.setColor(Color.red); g.drawRect(posOutNOX-3,posOutNOY+3 , 6, 6); } }

    Read the article

  • Cannot Start Nginx Compiled from Source

    - by Jason Alan Kennedy
    I am trying to compile Nginx from source based on the original compiled Nginx server running on my DigitalOcean server ( Ubuntu-14.04 64x ) but with a few extra modules. I can get everything installed smoothly but I can not get it to start. I am sure the ini is correct because I copied the original source off the current running Nginx server [ Even though I see that Nginx now adds the ini when compiling fron source ]. Below is the [ lengthy process ] that I am performing - add sorry but I wanted to be thorough for those who are in need of the info ]. Because I am a newB to Nginx, I am sure I am missing something or just have it all wrong. If you may look over what I have done and see if you spot anything I need/need to change, I will greatly appreciate it. Thnx! With the original Nginx server still running: I check the current/running Nginx configuration so I can build the new Nginx instance the same but with the added modules: nginx -V # The out-put: configure arguments: --with-cc-opt='-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' --with-ld-opt='-Wl,-Bsymbolic-functions -Wl,-z,relro' --prefix=/usr/share/nginx --conf-path=/etc/nginx/nginx.conf --http-log-path=/var/log/nginx/access.log --error-log-path=/var/log/nginx/error.log --lock-path=/var/lock/nginx.lock --pid-path=/run/nginx.pid --http-client-body-temp-path=/var/lib/nginx/body --http-fastcgi-temp-path=/var/lib/nginx/fastcgi --http-proxy-temp-path=/var/lib/nginx/proxy --http-scgi-temp-path=/var/lib/nginx/scgi --http-uwsgi-temp-path=/var/lib/nginx/uwsgi --with-debug --with-pcre-jit --with-ipv6 --with-http_ssl_module --with-http_stub_status_module --with-http_realip_module --with-http_addition_module --with-http_dav_module --with-http_geoip_module --with-http_gzip_static_module --with-http_image_filter_module --with-http_spdy_module --with-http_sub_module --with-http_xslt_module NOTE: The configure arguments below return errors during 'make' so I removed them. I don't know what they are - could this be related to my issue??? --with-cc-opt='-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' --with-ld-opt='-Wl,-Bsymbolic-functions -Wl,-z,relro' Moving on: # So I don't have to sudo every line: sudo bash # Check for updates first thing: apt-get update # Install various prerequisites needed to compile Nginx: apt-get install build-essential libgd2-xpm-dev lsb-base zlib1g-dev libpcre3 libpcre3-dev libbz2-dev libxslt1-dev libxml2 libssl-dev libgeoip-dev tar unzip openssl # Create System users [ if it doesn't exist - but I see its there on DigitalOceans' Droplets all-ready ]: adduser --system --no-create-home --disabled-login --disabled-password --group www-data # Download NGINX wget http://nginx.org/download/nginx-1.7.4.tar.gz tar -xvzf nginx-1.7.4.tar.gz # Then Google PageSpeed: wget https://github.com/pagespeed/ngx_pagespeed/archive/release-1.8.31.4-beta.zip unzip release-1.8.31.4-beta.zip # cd into the PageSpeed Directory cd ngx_pagespeed-release-1.8.31.4-beta/ # and add the PSOL files in there: wget https://dl.google.com/dl/page-speed/psol/1.8.31.4.tar.gz tar -xzvf 1.8.31.4.tar.gz # Get back to the root directory: cd # I add the ngx_cache_purge module and will install the Nginx Helper plugin for WP later: wget https://github.com/FRiCKLE/ngx_cache_purge/archive/2.1.zip unzip 2.1.zip # Add the headers-more-nginx-module: wget https://github.com/openresty/headers-more-nginx-module/archive/v0.25.zip unzip v0.25.zip # and the naxsi module for added security: wget https://github.com/nbs-system/naxsi/archive/0.53-2.tar.gz tar -xvzf 0.53-2.tar.gz # cd to the new Nginx directory cd nginx-1.7.4 # Set up the configuration build based on the current running Nginx config args and add my additional modules: ./configure \ --add-module=$HOME/naxsi-0.53-2/naxsi_src \ --prefix=/usr/share/nginx \ --conf-path=/etc/nginx/nginx.conf \ --http-log-path=/var/log/nginx/access.log \ --error-log-path=/var/log/nginx/error.log \ --lock-path=/var/lock/nginx.lock \ --pid-path=/run/nginx.pid \ --http-client-body-temp-path=/var/lib/nginx/body \ --http-fastcgi-temp-path=/var/lib/nginx/fastcgi \ --http-proxy-temp-path=/var/lib/nginx/proxy \ --http-scgi-temp-path=/var/lib/nginx/scgi \ --http-uwsgi-temp-path=/var/lib/nginx/uwsgi \ --user=www-data \ --group=www-data \ --with-debug \ --with-pcre-jit \ --with-ipv6 \ --with-http_ssl_module \ --with-http_stub_status_module \ --with-http_realip_module \ --with-http_addition_module \ --with-http_dav_module \ --with-http_geoip_module \ --with-http_gzip_static_module \ --with-http_image_filter_module \ --with-http_spdy_module \ --with-http_sub_module \ --with-http_xslt_module \ --with-mail \ --with-mail_ssl_module \ --add-module=$HOME/ngx_pagespeed-release-1.8.31.4-beta \ --add-module=$HOME/ngx_cache_purge-2.1 \ --add-module=$HOME/headers-more-nginx-module-0.25 [ENTER] Configuration Summary: Configuration summary + using system PCRE library + using system OpenSSL library + md5: using OpenSSL library + sha1: using OpenSSL library + using system zlib library nginx path prefix: "/usr/share/nginx" nginx binary file: "/usr/share/nginx/sbin/nginx" nginx configuration prefix: "/etc/nginx" nginx configuration file: "/etc/nginx/nginx.conf" nginx pid file: "/run/nginx.pid" nginx error log file: "/var/log/nginx/error.log" nginx http access log file: "/var/log/nginx/access.log" nginx http client request body temporary files: "/var/lib/nginx/body" nginx http proxy temporary files: "/var/lib/nginx/proxy" nginx http fastcgi temporary files: "/var/lib/nginx/fastcgi" nginx http uwsgi temporary files: "/var/lib/nginx/uwsgi" nginx http scgi temporary files: "/var/lib/nginx/scgi" Next step: I cd to root and I check the old Nginx folder locations and double checked the 'make' output to see that they are the same: whereis nginx #Output: nginx: /usr/sbin/nginx /etc/nginx /usr/share/nginx NOTE: Not sure about the '/usr/sbin/nginx' - Possible issue??? Next I copy the old /etc/nginx/nginx.conf, /etc/nginx/sites-available/default, /etc/nginx/sites-enabled/default, /etc/init.d/nginx to a text file locally for safe keeping to use in the new Nginx server. Then stop the running Nginx server: service nginx stop , verify it's stopped: service --status-all and the output is: [ - ] nginx To verify that there are two Nginx directories, I cd to: cd nginx* and the output is an error indicating there are two nginx folders - Cool Beans! :) Now Install the new Nginx server: cd nginx-1.7.4 make install # INSTALL OUTPUT ######################################## make -f objs/Makefile install make[1]: Entering directory `/home/walkingfish/nginx-1.7.4' test -d '/usr/share/nginx' || mkdir -p '/usr/share/nginx' test -d '/usr/share/nginx/sbin' || mkdir -p '/usr/share/nginx/sbin' test ! -f '/usr/share/nginx/sbin/nginx' || mv '/usr/share/nginx/sbin/nginx' '/usr/share/nginx/sbin/nginx.old' cp objs/nginx '/usr/share/nginx/sbin/nginx' test -d '/etc/nginx' || mkdir -p '/etc/nginx' cp conf/koi-win '/etc/nginx' cp conf/koi-utf '/etc/nginx' cp conf/win-utf '/etc/nginx' test -f '/etc/nginx/mime.types' || cp conf/mime.types '/etc/nginx' cp conf/mime.types '/etc/nginx/mime.types.default' test -f '/etc/nginx/fastcgi_params' || cp conf/fastcgi_params '/etc/nginx' cp conf/fastcgi_params '/etc/nginx/fastcgi_params.default' test -f '/etc/nginx/fastcgi.conf' || cp conf/fastcgi.conf '/etc/nginx' cp conf/fastcgi.conf '/etc/nginx/fastcgi.conf.default' test -f '/etc/nginx/uwsgi_params' || cp conf/uwsgi_params '/etc/nginx' cp conf/uwsgi_params '/etc/nginx/uwsgi_params.default' test -f '/etc/nginx/scgi_params' || cp conf/scgi_params '/etc/nginx' cp conf/scgi_params '/etc/nginx/scgi_params.default' test -f '/etc/nginx/nginx.conf' || cp conf/nginx.conf '/etc/nginx/nginx.conf' cp conf/nginx.conf '/etc/nginx/nginx.conf.default' test -d '/run' || mkdir -p '/run' test -d '/var/log/nginx' || mkdir -p '/var/log/nginx' test -d '/usr/share/nginx/html' || cp -R html '/usr/share/nginx' test -d '/var/log/nginx' || mkdir -p '/var/log/nginx' ######################################################### I copy/create the files that I saved earlier to txt files in sites-available, the config, default and ini files then symlink them to sites-enabled, and so on. And now to start the server: service nginx start And this is where s#!+ hits the fan - Nada. I check to see if Nginx is running with service --status-all and its not. Also with nginx -V and its not installed??? I reboot the system too and still nothing. So I am not sure what is wrong here. The ini was copied over from the old server along with all the other config files after deleting the old files. When I opened the new compiled files, the nginx default data was present so I replaced them with my old original data prior to starting the new server for the first time. Also to be safe, I rm /etc/nginx/sites-enabled/default and symlinked with ln -s /etc/nginx/sites-available/default /etc/nginx/sites-enabled/default with no errors and I verified that the data was in the sites-enabled/default file. I don't think the server really/fully installed because of the nginx -V result: The program 'nginx' can be found in the following packages: * nginx-core * nginx-extras * nginx-full * nginx-light * nginx-naxsi Try: apt-get install <selected package> Do/should I apt-get install nginx-1.7.4 ?? Or what package do I use being that its a custom package and make install earlier did nothing?? If you need to see the conf files I copied over from the old to the custom server, LMK and I'll post them. Again your help here would be appreciated!

    Read the article

  • Integrating JavaScript Unit Tests with Visual Studio

    - by Stephen Walther
    Modern ASP.NET web applications take full advantage of client-side JavaScript to provide better interactivity and responsiveness. If you are building an ASP.NET application in the right way, you quickly end up with lots and lots of JavaScript code. When writing server code, you should be writing unit tests. One big advantage of unit tests is that they provide you with a safety net that enable you to safely modify your existing code – for example, fix bugs, add new features, and make performance enhancements -- without breaking your existing code. Every time you modify your code, you can execute your unit tests to verify that you have not broken anything. For the same reason that you should write unit tests for your server code, you should write unit tests for your client code. JavaScript is just as susceptible to bugs as C#. There is no shortage of unit testing frameworks for JavaScript. Each of the major JavaScript libraries has its own unit testing framework. For example, jQuery has QUnit, Prototype has UnitTestJS, YUI has YUI Test, and Dojo has Dojo Objective Harness (DOH). The challenge is integrating a JavaScript unit testing framework with Visual Studio. Visual Studio and Visual Studio ALM provide fantastic support for server-side unit tests. You can easily view the results of running your unit tests in the Visual Studio Test Results window. You can set up a check-in policy which requires that all unit tests pass before your source code can be committed to the source code repository. In addition, you can set up Team Build to execute your unit tests automatically. Unfortunately, Visual Studio does not provide “out-of-the-box” support for JavaScript unit tests. MS Test, the unit testing framework included in Visual Studio, does not support JavaScript unit tests. As soon as you leave the server world, you are left on your own. The goal of this blog entry is to describe one approach to integrating JavaScript unit tests with MS Test so that you can execute your JavaScript unit tests side-by-side with your C# unit tests. The goal is to enable you to execute JavaScript unit tests in exactly the same way as server-side unit tests. You can download the source code described by this project by scrolling to the end of this blog entry. Rejected Approach: Browser Launchers One popular approach to executing JavaScript unit tests is to use a browser as a test-driver. When you use a browser as a test-driver, you open up a browser window to execute and view the results of executing your JavaScript unit tests. For example, QUnit – the unit testing framework for jQuery – takes this approach. The following HTML page illustrates how you can use QUnit to create a unit test for a function named addNumbers(). <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title>Using QUnit</title> <link rel="stylesheet" href="http://github.com/jquery/qunit/raw/master/qunit/qunit.css" type="text/css" /> </head> <body> <h1 id="qunit-header">QUnit example</h1> <h2 id="qunit-banner"></h2> <div id="qunit-testrunner-toolbar"></div> <h2 id="qunit-userAgent"></h2> <ol id="qunit-tests"></ol> <div id="qunit-fixture">test markup, will be hidden</div> <script type="text/javascript" src="http://code.jquery.com/jquery-latest.js"></script> <script type="text/javascript" src="http://github.com/jquery/qunit/raw/master/qunit/qunit.js"></script> <script type="text/javascript"> // The function to test function addNumbers(a, b) { return a+b; } // The unit test test("Test of addNumbers", function () { equals(4, addNumbers(1,3), "1+3 should be 4"); }); </script> </body> </html> This test verifies that calling addNumbers(1,3) returns the expected value 4. When you open this page in a browser, you can see that this test does, in fact, pass. The idea is that you can quickly refresh this QUnit HTML JavaScript test driver page in your browser whenever you modify your JavaScript code. In other words, you can keep a browser window open and keep refreshing it over and over while you are developing your application. That way, you can know very quickly whenever you have broken your JavaScript code. While easy to setup, there are several big disadvantages to this approach to executing JavaScript unit tests: You must view your JavaScript unit test results in a different location than your server unit test results. The JavaScript unit test results appear in the browser and the server unit test results appear in the Visual Studio Test Results window. Because all of your unit test results don’t appear in a single location, you are more likely to introduce bugs into your code without noticing it. Because your unit tests are not integrated with Visual Studio – in particular, MS Test -- you cannot easily include your JavaScript unit tests when setting up check-in policies or when performing automated builds with Team Build. A more sophisticated approach to using a browser as a test-driver is to automate the web browser. Instead of launching the browser and loading the test code yourself, you use a framework to automate this process. There are several different testing frameworks that support this approach: · Selenium – Selenium is a very powerful framework for automating browser tests. You can create your tests by recording a Firefox session or by writing the test driver code in server code such as C#. You can learn more about Selenium at http://seleniumhq.org/. LTAF – The ASP.NET team uses the Lightweight Test Automation Framework to test JavaScript code in the ASP.NET framework. You can learn more about LTAF by visiting the project home at CodePlex: http://aspnet.codeplex.com/releases/view/35501 jsTestDriver – This framework uses Java to automate the browser. jsTestDriver creates a server which can be used to automate multiple browsers simultaneously. This project is located at http://code.google.com/p/js-test-driver/ TestSwam – This framework, created by John Resig, uses PHP to automate the browser. Like jsTestDriver, the framework creates a test server. You can open multiple browsers that are automated by the test server. Learn more about TestSwarm by visiting the following address: https://github.com/jeresig/testswarm/wiki Yeti – This is the framework introduced by Yahoo for automating browser tests. Yeti uses server-side JavaScript and depends on Node.js. Learn more about Yeti at http://www.yuiblog.com/blog/2010/08/25/introducing-yeti-the-yui-easy-testing-interface/ All of these frameworks are great for integration tests – however, they are not the best frameworks to use for unit tests. In one way or another, all of these frameworks depend on executing tests within the context of a “living and breathing” browser. If you create an ASP.NET Unit Test then Visual Studio will launch a web server before executing the unit test. Why is launching a web server so bad? It is not the worst thing in the world. However, it does introduce dependencies that prevent your code from being tested in isolation. One of the defining features of a unit test -- versus an integration test – is that a unit test tests code in isolation. Another problem with launching a web server when performing unit tests is that launching a web server can be slow. If you cannot execute your unit tests quickly, you are less likely to execute your unit tests each and every time you make a code change. You are much more likely to fall into the pit of failure. Launching a browser when performing a JavaScript unit test has all of the same disadvantages as launching a web server when performing an ASP.NET unit test. Instead of testing a unit of JavaScript code in isolation, you are testing JavaScript code within the context of a particular browser. Using the frameworks listed above for integration tests makes perfect sense. However, I want to consider a different approach for creating unit tests for JavaScript code. Using Server-Side JavaScript for JavaScript Unit Tests A completely different approach to executing JavaScript unit tests is to perform the tests outside of any browser. If you really want to test JavaScript then you should test JavaScript and leave the browser out of the testing process. There are several ways that you can execute JavaScript on the server outside the context of any browser: Rhino – Rhino is an implementation of JavaScript written in Java. The Rhino project is maintained by the Mozilla project. Learn more about Rhino at http://www.mozilla.org/rhino/ V8 – V8 is the open-source Google JavaScript engine written in C++. This is the JavaScript engine used by the Chrome web browser. You can download V8 and embed it in your project by visiting http://code.google.com/p/v8/ JScript – JScript is the JavaScript Script Engine used by Internet Explorer (up to but not including Internet Explorer 9), Windows Script Host, and Active Server Pages. Internet Explorer is still the most popular web browser. Therefore, I decided to focus on using the JScript Script Engine to execute JavaScript unit tests. Using the Microsoft Script Control There are two basic ways that you can pass JavaScript to the JScript Script Engine and execute the code: use the Microsoft Windows Script Interfaces or use the Microsoft Script Control. The difficult and proper way to execute JavaScript using the JScript Script Engine is to use the Microsoft Windows Script Interfaces. You can learn more about the Script Interfaces by visiting http://msdn.microsoft.com/en-us/library/t9d4xf28(VS.85).aspx The main disadvantage of using the Script Interfaces is that they are difficult to use from .NET. There is a great series of articles on using the Script Interfaces from C# located at http://www.drdobbs.com/184406028. I picked the easier alternative and used the Microsoft Script Control. The Microsoft Script Control is an ActiveX control that provides a higher level abstraction over the Window Script Interfaces. You can download the Microsoft Script Control from here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d7e31492-2595-49e6-8c02-1426fec693ac After you download the Microsoft Script Control, you need to add a reference to it to your project. Select the Visual Studio menu option Project, Add Reference to open the Add Reference dialog. Select the COM tab and add the Microsoft Script Control 1.0. Using the Script Control is easy. You call the Script Control AddCode() method to add JavaScript code to the Script Engine. Next, you call the Script Control Run() method to run a particular JavaScript function. The reference documentation for the Microsoft Script Control is located at the MSDN website: http://msdn.microsoft.com/en-us/library/aa227633%28v=vs.60%29.aspx Creating the JavaScript Code to Test To keep things simple, let’s imagine that you want to test the following JavaScript function named addNumbers() which simply adds two numbers together: MvcApplication1\Scripts\Math.js function addNumbers(a, b) { return 5; } Notice that the addNumbers() method always returns the value 5. Right-now, it will not pass a good unit test. Create this file and save it in your project with the name Math.js in your MVC project’s Scripts folder (Save the file in your actual MVC application and not your MVC test application). Creating the JavaScript Test Helper Class To make it easier to use the Microsoft Script Control in unit tests, we can create a helper class. This class contains two methods: LoadFile() – Loads a JavaScript file. Use this method to load the JavaScript file being tested or the JavaScript file containing the unit tests. ExecuteTest() – Executes the JavaScript code. Use this method to execute a JavaScript unit test. Here’s the code for the JavaScriptTestHelper class: JavaScriptTestHelper.cs   using System; using System.IO; using Microsoft.VisualStudio.TestTools.UnitTesting; using MSScriptControl; namespace MvcApplication1.Tests { public class JavaScriptTestHelper : IDisposable { private ScriptControl _sc; private TestContext _context; /// <summary> /// You need to use this helper with Unit Tests and not /// Basic Unit Tests because you need a Test Context /// </summary> /// <param name="testContext">Unit Test Test Context</param> public JavaScriptTestHelper(TestContext testContext) { if (testContext == null) { throw new ArgumentNullException("TestContext"); } _context = testContext; _sc = new ScriptControl(); _sc.Language = "JScript"; _sc.AllowUI = false; } /// <summary> /// Load the contents of a JavaScript file into the /// Script Engine. /// </summary> /// <param name="path">Path to JavaScript file</param> public void LoadFile(string path) { var fileContents = File.ReadAllText(path); _sc.AddCode(fileContents); } /// <summary> /// Pass the path of the test that you want to execute. /// </summary> /// <param name="testMethodName">JavaScript function name</param> public void ExecuteTest(string testMethodName) { dynamic result = null; try { result = _sc.Run(testMethodName, new object[] { }); } catch { var error = ((IScriptControl)_sc).Error; if (error != null) { var description = error.Description; var line = error.Line; var column = error.Column; var text = error.Text; var source = error.Source; if (_context != null) { var details = String.Format("{0} \r\nLine: {1} Column: {2}", source, line, column); _context.WriteLine(details); } } throw new AssertFailedException(error.Description); } } public void Dispose() { _sc = null; } } }     Notice that the JavaScriptTestHelper class requires a Test Context to be instantiated. For this reason, you can use the JavaScriptTestHelper only with a Visual Studio Unit Test and not a Basic Unit Test (These are two different types of Visual Studio project items). Add the JavaScriptTestHelper file to your MVC test application (for example, MvcApplication1.Tests). Creating the JavaScript Unit Test Next, we need to create the JavaScript unit test function that we will use to test the addNumbers() function. Create a folder in your MVC test project named JavaScriptTests and add the following JavaScript file to this folder: MvcApplication1.Tests\JavaScriptTests\MathTest.js /// <reference path="JavaScriptUnitTestFramework.js"/> function testAddNumbers() { // Act var result = addNumbers(1, 3); // Assert assert.areEqual(4, result, "addNumbers did not return right value!"); }   The testAddNumbers() function takes advantage of another JavaScript library named JavaScriptUnitTestFramework.js. This library contains all of the code necessary to make assertions. Add the following JavaScriptnitTestFramework.js to the same folder as the MathTest.js file: MvcApplication1.Tests\JavaScriptTests\JavaScriptUnitTestFramework.js var assert = { areEqual: function (expected, actual, message) { if (expected !== actual) { throw new Error("Expected value " + expected + " is not equal to " + actual + ". " + message); } } }; There is only one type of assertion supported by this file: the areEqual() assertion. Most likely, you would want to add additional types of assertions to this file to make it easier to write your JavaScript unit tests. Deploying the JavaScript Test Files This step is non-intuitive. When you use Visual Studio to run unit tests, Visual Studio creates a new folder and executes a copy of the files in your project. After you run your unit tests, your Visual Studio Solution will contain a new folder named TestResults that includes a subfolder for each test run. You need to configure Visual Studio to deploy your JavaScript files to the test run folder or Visual Studio won’t be able to find your JavaScript files when you execute your unit tests. You will get an error that looks something like this when you attempt to execute your unit tests: You can configure Visual Studio to deploy your JavaScript files by adding a Test Settings file to your Visual Studio Solution. It is important to understand that you need to add this file to your Visual Studio Solution and not a particular Visual Studio project. Right-click your Solution in the Solution Explorer window and select the menu option Add, New Item. Select the Test Settings item and click the Add button. After you create a Test Settings file for your solution, you can indicate that you want a particular folder to be deployed whenever you perform a test run. Select the menu option Test, Edit Test Settings to edit your test configuration file. Select the Deployment tab and select your MVC test project’s JavaScriptTest folder to deploy. Click the Apply button and the Close button to save the changes and close the dialog. Creating the Visual Studio Unit Test The very last step is to create the Visual Studio unit test (the MS Test unit test). Add a new unit test to your MVC test project by selecting the menu option Add New Item and selecting the Unit Test project item (Do not select the Basic Unit Test project item): The difference between a Basic Unit Test and a Unit Test is that a Unit Test includes a Test Context. We need this Test Context to use the JavaScriptTestHelper class that we created earlier. Enter the following test method for the new unit test: [TestMethod] public void TestAddNumbers() { var jsHelper = new JavaScriptTestHelper(this.TestContext); // Load JavaScript files jsHelper.LoadFile("JavaScriptUnitTestFramework.js"); jsHelper.LoadFile(@"..\..\..\MvcApplication1\Scripts\Math.js"); jsHelper.LoadFile("MathTest.js"); // Execute JavaScript Test jsHelper.ExecuteTest("testAddNumbers"); } This code uses the JavaScriptTestHelper to load three files: JavaScripUnitTestFramework.js – Contains the assert functions. Math.js – Contains the addNumbers() function from your MVC application which is being tested. MathTest.js – Contains the JavaScript unit test function. Next, the test method calls the JavaScriptTestHelper ExecuteTest() method to execute the testAddNumbers() JavaScript function. Running the Visual Studio JavaScript Unit Test After you complete all of the steps described above, you can execute the JavaScript unit test just like any other unit test. You can use the keyboard combination CTRL-R, CTRL-A to run all of the tests in the current Visual Studio Solution. Alternatively, you can use the buttons in the Visual Studio toolbar to run the tests: (Unfortunately, the Run All Impacted Tests button won’t work correctly because Visual Studio won’t detect that your JavaScript code has changed. Therefore, you should use either the Run Tests in Current Context or Run All Tests in Solution options instead.) The results of running the JavaScript tests appear side-by-side with the results of running the server tests in the Test Results window. For example, if you Run All Tests in Solution then you will get the following results: Notice that the TestAddNumbers() JavaScript test has failed. That is good because our addNumbers() function is hard-coded to always return the value 5. If you double-click the failing JavaScript test, you can view additional details such as the JavaScript error message and the line number of the JavaScript code that failed: Summary The goal of this blog entry was to explain an approach to creating JavaScript unit tests that can be easily integrated with Visual Studio and Visual Studio ALM. I described how you can use the Microsoft Script Control to execute JavaScript on the server. By taking advantage of the Microsoft Script Control, we were able to execute our JavaScript unit tests side-by-side with all of our other unit tests and view the results in the standard Visual Studio Test Results window. You can download the code discussed in this blog entry from here: http://StephenWalther.com/downloads/Blog/JavaScriptUnitTesting/JavaScriptUnitTests.zip Before running this code, you need to first install the Microsoft Script Control which you can download from here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d7e31492-2595-49e6-8c02-1426fec693ac

    Read the article

< Previous Page | 362 363 364 365 366 367 368 369  | Next Page >