Search Results

Search found 13164 results on 527 pages for 'missing'.

Page 367/527 | < Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >

• Reusing slot numbers in Linux software RAID arrays

  - by thkala

  When a hard disk drive in one of my Linux machines failed, I took the opportunity to migrate from RAID5 to a 6-disk software RAID6 array. At the time of the migration I did not have all 6 drives - more specifically the fourth and fifth (slots 3 and 4) drives were already in use in the originating array, so I created the RAID6 array with a couple of missing devices. I now need to add those drives in those empty slots. Using mdadm --add does result in a proper RAID6 configuration, with one glitch - the new drives are placed in new slots, which results in this /proc/mdstat snippet: ... md0 : active raid6 sde1[7] sdd1[6] sda1[0] sdf1[5] sdc1[2] sdb1[1] 25185536 blocks super 1.0 level 6, 64k chunk, algorithm 2 [6/6] [UUUUUU] ... mdadm -E verifies that the actual slot numbers in the device superblocks are correct, yet the numbers shown in /proc/mdstat are still weird. I would like to fix this glitch, both to satisfy my inner perfectionist and to avoid any potential sources of future confusion in a crisis. Is there a way to specify which slot a new device should occupy in a RAID array? UPDATE: I have verified that the slot number persists in the component device superblock. For the version 1.0 superblocks that I am using that would be the dev_number field as defined in include/linux/raid/md_p.h of the Linux kernel source. I am now considering direct modification of said field to change the slot number - I don't suppose there is some standard way to manipulate the RAID superblock?

  Read the article

• Oracle Error ORA-12560 TNS:Protocol Adapter error?

  - by David Basarab

  I am using Oracle Database 10g. Both Servers are Windows 2003. I have an Orcale Database set up on one server. Here is the TNSNames.ora from the server with the database. # tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORCL.VIRTUALHOLD.COM = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = databaseServer)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl) ) ) The Environmental Variables on the Server are ORACLE_HOME = C:\oracle\product\10.2.0\db_1 ORACLE_SID = orcl I am trying to connect to it from another box that has Oracle Client installed. Here is the tnsnames.ora installed on the other client server. # tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\client_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORCL = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = databaseServer)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = orcl) ) ) ORACLE_HOME = C:\oracle\product\10.2.0\client_1 ORACLE_SID = orcl Locally on the database server I can connect to through sqlplus with no issues. On the client machine I keep getting the error: ORA-12560: TNS:protocol adapter error What am I missing? Does the client TNSNames.ora need to be different?

  Read the article

• Faster, secure, protocol/code required for long-distance transfer.

  - by Chopper3

  I've ran into a problem and I'm looking for a new secure protocol/client/server that's faster over a 1Gb/s fibre link - let me tell you the story... I have a pair of redundant, diversely-routed, 1Gb/s links over a distance of around 250 miles or so (not dark fibre but a dedicated point to point link, not a mesh). At the 'client' end I have a HP DL380 G5 (2 x dual-core 2.66Ghz Xeon's, 4GB, Windows 2003EE 32-bit), at the 'server' end I have a HP BL460c G6 (2 x quad-core 2.53Ghz Xeons, 48GB, Oracle Linux 5.3 64-bit). I need to transfer around 500 x 2GB files per week from the client to the server machines per week - but the transfer NEEDS to be secure. Using both iPerf or regular FTP I can get ~80MB/s of transfer pretty consistently, which is great. Using WinSCP or Windows SFTP I can't seem to get more that ~3-4MB/s, at this point the server's CPU is 3% busy while CPU0 of the client goes to ~30% utilised. We've tried editing various TCP window sizes with little success. Both ends are connected to quite low-usage Cisco Cat6509's with Sup720's. I can replace the client machine with a newer machine and/or move it to Linux - but this will take time. Clearly these single-threaded secure Windows clients are introducing too much latency doing their encryption. So a few questions/thoughts; Are there any higher performing secure protocols or client software for Windows that I could try? I'm pretty protocol-gnostic so long as it'll work between Windows and Linux. Should I be using hardware to do the encryption, either in the client or the network parts? If so what would you recommend? I'm not convinced that just swapping the server would be that much faster, the CPU was only at 30% but then again that's higher than I'd have expected given the load - moving to Linux at the client end may be a better idea but would be quite disruptive. Am I missing a trick? Thanks in advance.

  Read the article

• Will these instructions work when turning of journaling on an ext4 SSD?

  - by snowlord

  I have an Acer Aspire One with an SSD for storage. I recently installed Ubuntu on it and chose ext4 for my filesystem. Then I read that journaling on an SSD isn't the best idea, so I will try to disable journaling and I have found these intstructions (from http://fenidik.blogspot.com/2010/03/ext4-disable-journal.html): # Create ext4 fs on /dev/sda10 disk mkfs.ext4 /dev/sda10 # Enable writeback mode. This mode will typically provide the best ext4 performance. tune2fs -o journal_data_writeback /dev/sda10 # Delete has_journal option tune2fs -O ^has_journal /dev/sda10 # Required fsck e2fsck -f /dev/sda10 # Check fs options dumpe2fs /dev/sda10 |more For more performance add fstab opions: data=writeback,noatime,nodiratime i.e: /dev/sda10 /opt ext4 defaults,data=writeback,noatime,nodiratime 0 0 I will use them on my boot partition. Are there any particularly bad parts here, or are there any missing steps? Will my boot partition be fit for being on an SSD after this? Or should I consider switching to ext2, or even reinstall it all and choose ext2 at partitioning time (I'd rather not though, since I've configured quite some stuff already)?

  Read the article

• Vyatta masquerade out bridge interface

  - by miquella

  We have set up a Vyatta Core 6.1 gateway on our network with three interfaces: eth0 - 1.1.1.1 - public gateway/router IP (to public upstream router) eth1 - 2.2.2.1/24 - public subnet (connected to a second firewall 2.2.2.2) eth2 - 10.10.0.1/24 - private subnet Our ISP provided the 1.1.1.1 address for us to use as our gateway. The 2.2.2.1 address is so the other firewall (2.2.2.2) can communicate to this gateway which then routes the traffic out through the eth0 interface. Here is our current configuration: interfaces { bridge br100 { address 2.2.2.1/24 } ethernet eth0 { address 1.1.1.1/30 vif 100 { bridge-group { bridge br100 } } } ethernet eth1 { bridge-group { bridge br100 } } ethernet eth2 { address 10.10.0.1/24 } loopback lo { } } service { nat { rule 100 { outbound-interface eth0 source { address 10.10.0.1/24 } type masquerade } } } With this configuration, it routes everything, but the source address after masquerading is 1.1.1.1, which is correct, because that's the interface it's bound to. But because of some of our requirements here, we need it to source from the 2.2.2.1 address instead (what's the point of paying for a class C public subnet if the only address we can send from is our gateway!?). I've tried binding to br100 instead of eth0, but it doesn't seem to route anything if I do that. I imagine I'm just missing something simple. Any thoughts?

  Read the article

• SSH Keys Authentication keeps asking for password

  - by Rhyuk

  Im trying to set access from ServerA(SunOS) to ServerB(Some custom Linux with Keyboard Interactive login) with SSH Keys. As a proof of concept I was able to do it between 2 virtual machines. Now in my real life scenario it isnt working. I created the keys in ServerA, copied them to ServerB, chmod'd .ssh folders to 700 on both ServerA,B. Here is the log of what I get. debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: Peer sent proposed langtags, ctos: debug1: Peer sent proposed langtags, stoc: debug1: We proposed langtags, ctos: en-US debug1: We proposed langtags, stoc: en-US debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: dh_gen_key: priv key bits set: 125/256 debug1: bits set: 1039/2048 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'XXX.XXX.XXX.XXX' is known and matches the RSA host key. debug1: Found key in /XXX/.ssh/known_hosts:1 debug1: bits set: 1061/2048 debug1: ssh_rsa_verify: signature correct debug1: newkeys: mode 1 debug1: set_newkeys: setting new keys for 'out' mode debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: newkeys: mode 0 debug1: set_newkeys: setting new keys for 'in' mode debug1: SSH2_MSG_NEWKEYS received debug1: done: ssh_kex2. debug1: send SSH2_MSG_SERVICE_REQUEST debug1: got SSH2_MSG_SERVICE_ACCEPT debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Next authentication method: publickey debug1: Trying private key: /XXXX/.ssh/identity debug1: Trying public key: /xxx/.ssh/id_rsa debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Trying private key: /xxx/.ssh/id_dsa debug1: Next authentication method: keyboard-interactive Password: Password: ServerB has pretty limited actions since its a custom propietary linux. What could be happening? EDIT WITH ANSWER: Problem was that I didnt have those settings enabled in the sshd_config (Refer to accepted answer) AND that while pasting the key from ServerA to ServerB it would interpret the key as 3 separate lines. What I did was, in case you cant use ssh-copy-id like I couldnt. Paste the first line of your key in your "ServerB" authorized_keys file WITHOUT the last 2 characters, then type yourself the missing characters from line 1 and the first one from line 2, this will prevent adding a "new line" between the first and second line of the key. Repeat with the 3d line.

  Read the article

• HP tx2510us shuts down without warning, now won't boot, no BIOS codes, screen doesn't light

  - by Tim S

  Hey all, HP tx2150us worked great for a year and a half, rarely it would shut down instead of sleeping. It started running hot sometimes, I installed Win7, worked great, still running hot. Before Xmas, it gave me evidence of video errors - jagged lines, rows missing. That same night, it started rebooting, then it shut off and wouldn't boot. It gave me a BIOS code, I shut it off to look up the code online. When I turned it on again, it won't boot at all. The LEDs all light up, the fan, HD, and optical all spin up, but the screen never lights up and it doesn't try to boot, nor does it blink any BIOS codes. It just acts like it's sleeping, and won't wake up. I suspected heat problems, so I disassembled it, cleaned the crap out of the fan, and reassembled it, breaking the stereo mic connector. Oh well. When I reassembled it, it booted up into Win7 again, but kept shutting down for no discernible reason. After a dozen or so random reboots like that, it is now back to where it was - turns on but doesn't boot or give BIOS codes. The screen never lights, and everything spins up then idles. Any ideas? I really can't afford to buy a new one and I use(d) it to take ALL my notes, that's why I got a tablet in the first place.

  Read the article

• Storing Windows Updates for reuse

  - by Saiyine

  At work we update lots of computers using Windows Update. Windows XP and 7 all day long, rarely some Vista. We do it through a corporate proxy, as connecting them to a domain to build a Wsus server is out of the question, so we download about two gigabytes a day of the very same updates everyday. I've tried WSUS Offline. It's pretty complete but when it finishes it's common to be still missing hundreds of megabytes of updates, because its intention is not to fully update a system but to install the critical updates, as the developers explain in the forums. Now I'm trying with Autoupdater. It's far worse, with poor capabilities for non-English Windows XP, but at least it gives the option to install non critical updates in Windows 7. It still misses hundres of megabytes of updates after fully updating the system. And finally, both doesn't install the driver related updates of Windows 7, so they at most save us a couple of hundreds of megabytes and a reboot (with the associated login to the computer and to the proxy) out of three or four. So, is it possible to somewhat extract the installed updates in a Windows 7 system and not having to download the same updates again and again at least with machines with the same hardware? Or even better, a generic package with all the updates?

  Read the article

• What's the best / easiest way to combine two mailboxes on Exchange 2007?

  - by jmassey

  I've found this and this(2) (sorry, maximum hyperlink limit for new users is 1, apparently), but they both seem targeted toward much more complex cases than what I'm trying to do, and I just want to make sure I'm not missing some better approach. Here's the scenario: 'Alice' has retired. 'Bob' has taken over Alice's position. Bob was already with the organization in a different but related position, and so they already have their own Exchange account with mail, calendars, etc., that they need to keep. I need to get all of Alice's old mail, calendar entries, etc., merged into Bob's existing stuff. Ideally, I don't want to have all of Alice's stuff in a separate 'recovery' folder that Bob would have to switch back and forth between to look at older stuff; I want it all just merged into Bob's current Inbox / Calendar. I'm assuming (read: hoping) that there's a better way to do this than fiddling with permissions and exporting to and then importing from a .pst. Office version is 2007 for everybody that uses Exchange, if that helps. Exchange is version 8.1. What (preferably step-by-step - I'm new to Exchange) is the best way to do this? I can't imagine this is an uncommon scenario, but my google-fu has failed me; there seems to be nothing on this subject that isn't geared towards far more complex scenarios. (2): h t t p://technet.microsoft.com/en-us/library/bb201751%28EXCHG.80%29.aspx

  Read the article

• ssh many users to one home

  - by filippo

  Hiya, I want to allow some trusted users to scp files into my server (to an specific user), but I do not want to give these users a home, neither ssh login. I'm having problems to understand the correct settings of users/groups I have to create to allow this to happen. I will put an example; Having: MyUser@MyServer MyUser belongs to the group MyGroup MyUser's home will be lets say, /home/MyUser SFTPGuy1@OtherBox1 SFTPGuy2@OtherBox2 They give me their id_dsa.pub's and I add it to my authorized_keys I reckon then, I'd do in my server something like useradd -d /home/MyUser -s /bin/false SFTPGuy1 (and the same for the other..) And for the last, useradd -G MyGroup SFTPGuy1 (then again, for the other guy) I'd expect then, the SFTPGuys to be able to sftp -o IdentityFile=id_dsa MyServer and to be taken to MyUser's home... Well, this is not the case... SFTP just keeps asking me for a password. Could someone point out what am I missing? Thanks a mil, f. [EDIT: Messa in StackOverflow asked me if authorized_keys file was readable to the other users (members of MyGroup). Its an interesting point, this was my answer: Well, it wasn't (it was 700), but then I changed the permissions of the .ssh dir and the auth file to 750 though still no effect. Guess it's worth mentioning that my home dir ( /home/MyUser) is also readable for the group; most dirs being 750 and the specific folder where they'd drop files is 770. Nevertheless, about the auth file, I reckon the authentication would be performed by the local user on MyServer, isn't it? if so, I don't understand the need for other users to read it... well.. just wondering. ]

  Read the article

• VMWare web UI intermittent access on CentOS

  - by PeteWilliams

  Hiya, I've got a CentOS 5.2 server that I'm trying to get set up as a development environment. As part of this, I planned to install VMWare Server 2 and set up several virtual development servers. I've got as far as installing VMWare Server 2 but access to the remote control panel is only working intermittently. If I access it through Firefox at https://127.0.0.1:8333/ui/# it usually says either: "Connection intterupted: connection was reset before the page loaded" Or "Firefox can't establish a connection to the server at 127.0.0.1" But every now and then it lets me in and I'll manage a few clicks in the web UI before it kicks me out with the following error: "The server could not complete a request (HTTP 0 ). The server encountered an unexpected condition that prevented it from fulfilling the request. If this problem persists, please contact your system administrator." I've done all the updates available in CentOS except one OpenOffice one that is causing a conflict, and I re-ran wmware-config.pl after updating the kernel. Though I went with all the defaults as I don't really know what I'm doing! I've since rebooted and nothing changed. I've also tried accessing the control panel remotely from another machine in the network and the results are the same. Does anyone have any ideas what might be causing this and how I can resolve it? I'm afraid I'm a developer playing at sys-admin, so I may be missing something obvious! Many thanks Pete Update I have now reinstalled both the operating system and VMWare and I'm still getting the same issue. I wonder if it's a result of the settings I'm putting in on the config.pl script..?

  Read the article

• Can a website company that builds 4-5 websites a year afford dedicated hosting?

  - by Petras

  We manage about 30 websites that use shared ASP.NET SQL Server web hosting. These are typical small/medium business websites and they perform fine in this environment. Recently I was looking at VPS hosting in this thread http://serverfault.com/questions/128329/how-do-you-host-multiple-public-facing-websites-on-a-vps After contacting a provider in one of the replies I was told that VPS hosting is not recommended for 30 sites, even if they are small. The resource requirements might be too great even for VPS. So I should turn to dedicated hosting. The lowest cost dedicated hosting is $219 per month (see http://www.serverintellect.com/dedicated/pentiumdservers.aspx). But this is only for a single processor which seems too light for a machine running both IIS and SQL. In our office all the developers work on quad cores so I assume I’d really need the Quad Processor. However, this starts at $599 monthly. Now, I won’t be able to transfer all of our 30 sites to this machine. I’d only be able to transfer say 5 or 6. However, moving forward, I’d be able to host all future sites on this machine. This amounts to 4-5 per year. Let’s look at the economics. Shared hosting costs are typically $16.95 monthly (see http://www.crystaltech.com/dotnet.aspx). So here’s the dilemma First months costs: $599 First month revenue: 6x$16.95 = $101.7 Loss in first month: $497.3 First year costs: $599x12=$7188 First month revenue: 6x$16.95x12 + 5x$16.95x6(averaged) = $1728.9 Loss in first year: $5459.1 Clearly it is going to take years for this server to pay for itself. It just doesn’t seem economical! Am I missing something here, or is dedicated not the way to go with the amount of sites we build?

  Read the article

• How can I install .NET framework 3.5 on XP machines without internet connection?

  - by EricSchaefer

  I want to install .NET framework 3.5 on a couple of machines that do not have internet access. If I install the "no internet access"-package it still wants to download something. How can I figure out what is missing? Are there other installation packages? Edit: I would present screenshots but I cannot upload anything from here and the shots would be in german. So I present only the text translated back to english... Installing the "full redistributable package": At the bottom of the license agreement page it display this text: Size of download file: 67 MB Appoximate download time: 2h 44min (56KBit/s) 18min (512KBit/s) It shows the text even if I installed Windows Installer 3.1. After agreeing it displays the "Download and Installation Status"-Dialog with a progress bar labeled "Download:" and Status: Connection to server attempted (try X of 5). Total Download Status: 56MB/67MB I tried it in a VM with no network connection. It tries 5 times while the progress bar shows progress. Later the progress bar is labeled "Installation:". Even later it reports problems during setup and provides two buttons "Send Report Later" and "Don't Send". Now here it comes: "Setup completed" and "Microsoft .NET Framework 3.5 has been deinstalled successfully." (Emphasis is mine) "It is recommended to install current service packs and security updates. More information at Windows Update (link)." Edit2: Installed Service Pack 3, but still no success.

  Read the article

• Connection timed out on Node.js app running under CentOS

  - by ss1271

  I followed this tutorial to create a simple node.js app on my CentOS: the node.js version is: $ node -v v0.10.28 Here's my app.js: // Include http module, var http = require("http"), // And url module, which is very helpful in parsing request parameters. url = require("url"); // show message at console console.log('Node.js app is running.'); // Create the server. http.createServer(function (request, response) { request.resume(); // Attach listener on end event. request.on("end", function () { // Parse the request for arguments and store them in _get variable. // This function parses the url from request and returns object representation. var _get = url.parse(request.url, true).query; // Write headers to the response. response.writeHead(200, { 'Content-Type': 'text/plain' }); // Send data and end response. response.end('Here is your data: ' + _get['data']); }); // Listen on the 8080 port. }).listen(8080); However, when I uploaded this app onto my remote server (assume the address is 123.456.78.9), I couldn't get access to it on my browser http://123.456.78.9:8080/?data=123 The browser returned Error code: ERR_CONNECTION_TIMED_OUT. I tried the same app.js code which runs fine on my local machine, is there anything I am missing? I tried to ping the server and its address was reachable. Thanks.

  Read the article

• nginx logrotate config

  - by TomOP

  Whats the best way to rotate nginx logfiles? In my opinion, I should create a file "nginx" in /etc/logrotate.d/ and fill it with the following code and do a /etc/init.d/syslog restart after that. This would be my config (I havn't tested it yet): /usr/local/nginx/logs/*.log { #rotate the logfile(s) daily daily # adds extension like YYYYMMDD instead of simply adding a number dateext # If log file is missing, go on to next one without issuing an error msg missingok # Save logfiles for the last 49 days rotate 49 # Old versions of log files are compressed with gzip compress # Postpone compression of the previous log file to the next rotation cycle delaycompress # Do not rotate the log if it is empty notifempty # create mode owner group create 644 nginx nginx #after logfile is rotated and nginx.pid exists, send the USR1 signal postrotate [ ! -f /usr/local/nginx/logs/nginx.pid ] || kill -USR1 `cat /usr/local/nginx/logs/nginx.pid` endscript } I have both the access.log and error.log files in /usr/local/nginx/logs/ and want to rotate both daily. Can anyone please tell me if "dateext" is correct? I want the log filename to be something like "access.log-2010-12-04". One more thing: Can I do the log rotation every day on a specific time (e.g. 11 pm)? If so, how? Thanks.

  Read the article

• dell latitude XT touch screen issue

  - by Jake

  yesterday I installed windows 7 ultimate after I had the enterprise version on this machine for a few months. the installation went smoothly and everything worked fine except for the finger detection of the screen(only the pen worked) and the bottom screen buttons for rotating and so. so I started to install all the missing drivers dell recommends for this model on their site, but once I tried to install N-Trig degitizer driver the installation said it was unsuccessful and since then the touch stopped working completely! I tried system restore but it didn't help so I went on and formatted the harddisk completely once again and installed windows but that didn't work either. I tried to install the N-Trig's driver but it was alarting for a fatal error and said that no device was detected. same story with N-Trig rollback. so I checked the device manager and saw an "unknown device" with VID and PID values set as 0000. I figured the N-Trig driver might have messed with the device firmware or something and now it doesnt know it's ID and munufactor... Is there anything that can be done? like forcing the N-Trig driver to install on this device or something? please help!

  Read the article

• How can I use my cell phone to establish a dial-up networking connection?

  - by gWiz

  I am using Windows 7 and have a BlackBerry with T-Mobile (U.S.). I have paired the phone with my computer over Bluetooth, which automatically creates a serial port for it. I am able to open the port in PuTTY and successfully issue AT commands to the modem, including dialing. However, while using Windows to create and establish a Dial-Up Networking connection, I get an error dialog stating "Error 678. The remote computer did not respond." In my testing, I also tried setting up a connection to dial a number connected to a phone. When attempting to connect over this connection, the phone does ring but the very moment I answer the call, my computer displays the above error dialog. What must be done to successfully establish such a PPP connection? Some special AT initialization string perhaps? To clarify, I'm not referring to the well-described and popular technique known as "tethering," in which the remote host of the data link is the mobile service provider. I am interested specifically in establishing direct data links with remote hosts other than my mobile service provider. Think old-school landline connection to your friend's computer or BBS. Edit 1 As grawity pointed out in comments, the missing piece of the puzzle is the actual modulator that is compatible with v-series protocols, which I expected to be built into the cellphone. So far the best only software alternative I could find is this experimental project. Edit 2 Found this forum discussion today. The participants state that there is no old-school modem in the BlackBerry. Edit 3 When I place a call in PuTTY with ATD, immediately after the call is answered (and the callee is initiating the handshake) the cellphone returns OK. This is not the expected behavior for establishing a data connection. The phone should reciprocate the handshake, and upon success return CONNECT. (Alternatively it should return BUSY or NO CARRIER, but never simply OK.) Windows DUN must be interpreting this as the "Error 678" I was seeing.

  Read the article

• Can Spotlight or Media Browser index metadata contained in iPhoto or Aperture in Mac OS X?

  - by jaydles

  It seems silly to go to all the trouble to assign "Face" data to thousands of photos, but not make it possible to use that data to locate them outside of that application. Is there any way to get Spotlight or Media Browser in OSX (Snow Leopard) to index and recognize metadata (Faces, Places, etc.) contained in iPhoto or Aperture? I know that that metadata is stored in the "library" database for Aperture/iphoto, rather than on the actual files (which is too bad). And I can even potentially see why it might create challenges for spotlight to use it, since spotlight is presumably a file index system, not a media organizer, but surely the media browser used across the other OSX apps is intended to use it? The media browser's whole purpose seems to be to let you easily locate and reference the items you organize in one of the ilife apps (iphoto or Aperture, in this case) from the others (say, imovie, or Mail). It's particularly vexing since the photo app on the iphone sorts by faces by default. Additionally, the mac-based media browser does access smart albums and folders, so you could establish a workaround by creating a smart album for each "face" or place, or tag, and access them that way, but it seems like there must be an easier way. Am I missing something?

  Read the article

• logrotate deletes all maillogs older than one day

  - by shadyabhi

  I see only two files maillog and maillog.1 in /var/log. grepping for maillog in logrotate.d directory gives three files that have a mention of maillog. syslog /var/log/messages /var/log/secure /var/log/maillog /var/log/spooler /var/log/boot.log /var/log/cron { #/var/log/messages /var/log/secure /var/log/spooler /var/log/boot.log /var/log/cron { daily sharedscripts postrotate /bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true /bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true endscript } syslog-ng /var/log/messages /var/log/secure /var/log/maillog /var/log/spooler /var/log/boot.log /var/log/cron /var/log/kern.log /var/log/kern { sharedscripts postrotate /bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true /bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true endscript } and maillog. /var/log/maillog { daily compress # rotate 365 rotate 14 sharedscripts postrotate /bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true /bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true endscript } I am new to logrotate so may be I am missing something obvious. What can be the issue? The setup was already done when I started managing the server so I don't also know as do why do I have 3 mentions for maillog in logrotate.

  Read the article

• Virtual machine lost after power cut

  - by dannymcc

  We have just had a power issue and our ESX (ESXi 4.1.0) host lost power and then rebooted. All but one of the virtual servers have rebooted with no problem, however one of them refused to power up. I try to power it on and I get the following error: File <unspecified filename> was not found Reason: The system cannot find the file specified. Cannot open the disk '/vmfs/volumes/4e03076e-90834647-b846-001185c38f42/LAMP- Stack/turnkey-lamp-11.3-lucid-x86.vmdk' or one of the snapshot disks it depends on. VMware ESX cannot find the virtual disk "/vmfs/volumes/4e03076e-90834647-b846- 001185c38f42/LAMP-Stack/turnkey-lamp-11.3-lucid-x86.vmdk". Verify the path is valid and try again. I have logged into the ESX host to see if the file is there an have found only the following file that matches the filename: /vmfs/volumes/4e03076e-90834647-b846-001185c38f42/LAMP-Stack/turnkey-lamp-11.3-l ucid-x86-s001.vmdk I notice that the above file has '-s001' after the filename. Is this recoverable? Any help of advice is greatly appreciated! EDIT: Running ls -l on the directory that contains the file shows this: drwxr-xr-t 1 root root 1680 Feb 9 09:49 4e03076e-90834647-b846-001185c38f42 The databrowser file system looks like this: and in a different directory there is the file that matches the missing one:

  Read the article

• Users and Groups management on 7 Home Premium

  - by AviD

  Recently upgraded the home pc from XP pro, to Windows 7 Home Premium. I'm looking for a solution for a few things that seem to be missing from this edition... Since Local Users and Groups is blocked on Home Premium, I can't figure out how to manage groups, or even do anything even slightly advanced to users (basically, create/group/picture is it). net localgroup, net users, net etc dont seem to work - getting "system error 5". While I'm on the topic, I cant activate (what was once) "Local Security Policy"... Looking for any help, advice, or even a new direction cuz things is differ'nt on Winnows7... To clarify, I'm looking to do some of the following, which were simply back in XP-land: remote user only (i.e. no local logon) Grant special privileges for specific user grant access to e.g. C$ share for specific remote user create custom groups for users, to be able to separate privileges of say, my wife's from my kids define quite specifically what each user can do (beyond just standard users) Harden OS (hmm, i guess maybe what i'm looking for is security hardening guide for 7...?)

  Read the article

• Why is ssh agent forwarding not working?

  - by J. Pablo Fernández

  In my own computer, running MacOSX, I have this in ~/.ssh/config Host * ForwardAgent yes Host b1 ForwardAgent yes b1 is a virtual machine running Ubuntu 12.04. I ssh to it like this: ssh pupeno@b1 and I get logged in without being asked for a password because I already copied my public key. Due to forwarding, I should be able to ssh to pupeno@b1 from b1 and it should work, without asking me for a password, but it doesn't. It asks me for a password. What am I missing? This is the verbose output of the second ssh: pupeno@b1:~$ ssh -v pupeno@b1 OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to b1 [127.0.1.1] port 22. debug1: Connection established. debug1: identity file /home/pupeno/.ssh/id_rsa type -1 debug1: identity file /home/pupeno/.ssh/id_rsa-cert type -1 debug1: identity file /home/pupeno/.ssh/id_dsa type -1 debug1: identity file /home/pupeno/.ssh/id_dsa-cert type -1 debug1: identity file /home/pupeno/.ssh/id_ecdsa type -1 debug1: identity file /home/pupeno/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA 35:c0:7f:24:43:06:df:a0:bc:a7:34:4b:da:ff:66:eb debug1: Host 'b1' is known and matches the ECDSA host key. debug1: Found key in /home/pupeno/.ssh/known_hosts:1 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /home/pupeno/.ssh/id_rsa debug1: Trying private key: /home/pupeno/.ssh/id_dsa debug1: Trying private key: /home/pupeno/.ssh/id_ecdsa debug1: Next authentication method: password pupeno@b1's password:

  Read the article

• Step by step instructions to make dos "see" and "access" usb hard drives

  - by Gireesh Venkateswaran

  I am stuck with an USB external hard drive (Maxtor 1 Touch) 750GB that crashed. I have photos and home movies (my son's birth, first birthday etc) that are very important to me. I am given to understand that Spinrite is a very good tool to use, but It does not come "with out of the box" capabilities to access USB drives. If I open the case to get the HDD out from my External HDD, I would compromise the warrenty and I would not be able to exchange the Drive. I have done a bit of research and have the drivers that could help. But the bit I am missing is, How to put it all together. I would really appreciate it if some one can give me step by step instruction where I can create a dos boot cd that can load the drivers and assign a drive letter to it so that I can make Dos "See" the external hard drive. I have a Toshiba satellite laptop that runs Windows XP (Home). It does not have a floppy drive. I will be greatful to your help in the regard.

  Read the article

• Soundtest works, but no other sounds and windows starts very slowly

  - by Kristian Kari

  So suddenly all sounds on my computer stopped working expect the sound test works, but when I go to control panel and audio it says there's no audio device. And audio players and audio on website doesn't work either. and Also windows starts very slowly. I'm not sure if this helps but I'll tell what happened before this. I downloaded this program from a little shady website, I hesitated and for a good reason I guess cos the moment I finished downloading it, my antivir detected it as unwanted program and put it on quarantine. I thought everything was fine, but had some problems with program (won't go to details about it cos it's not really related to audio) so rebooted the computer and I was suprised that windows started really really slowly. It took like 5 mins to load the desktop such. After that I noticed the sounds were missing, I immediately deleted the program since I thought it was causing the problem. But it didn't change much. I tried to find the solution with no success and now I'm just scanning again my computer. I'd be thankful if anyone would be able to help me. I might have left a thing or ten things out, so feel free to ask. oh and I'm using windows xp

  Read the article

• How to speed up request/response to django using apache or another solution?

  - by jbcurtin

  Hey all, I'm mainly a developer, but every now and again I jump into the sys-admin position. For the most part I've gotten away with deploying php and python apps using apache. I write today because I'm starting to research faster alternatives to apache, yet still have some of the core features I require like put and delete methods and the ability to connect to a socket via apache. ( This I have not tried, but might be a nice whistle if I ever employ comet on my apps. ) As you've probably guessed, I use javascript exclusively for all my websites utilizing deep linking for SEO support. The main areas that I'm looking to increase performance is the connection between the django apps and the web server to the client response. Every day I work my best to keep the smallest memory foot print as possible, however I am getting to the end of my rope when it comes to working with apache. In general, keep in mind that I'm just starting this research so I'm looking more for material to read then solutions at this moment. My main questions: Am I missing something about apache that makes it faster then everything else? What would be a good server environment to deploy just static files one? What are some of the leading open-source and paid alternatives?

  Read the article

< Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >