Search Results

Search found 14131 results on 566 pages for 'note'.

Page 367/566 | < Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >

• Define custom escape sequences in terminal

  - by Ipkiss

  I would like to change the escape sequences used by some keys in my terminal. My goal is to define custom mappings in Vim (terminal version). In the following I use shift-space as an example, but I would prefer if the proposed solution could be generic. My current terminal (gnome-terminal) uses a simple space as escape sequence for shift-space, as can be seen by typing ctrl-v shift-space. A quick check with the true xterm shows the same behavior. I would like that the shift-space key combo generates another escape sequence (e.g., the one of shift-F30, which I would never use otherwise). So, how would I go about doing that? And is it really a good idea? Let me know if there are better alternatives... Note: I'm aware that this is only part of the problem: after the terminal sends a proper escape sequence for my keys, I still need to teach Vim what it means. But I think I know how to deal with that.

  Read the article

• Two DHCP interfaces asigned to two default gateways to OS

  - by user140600

  I have a Ubuntu box that has two networking interfaces (eth0 and wlan0). They are both configured for DHCP in /etc/network/interfaces, but they both assign a default gateway: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto wlan0 iface wlan0 inet dhcp wireless-essid test Result of route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 172.16.1.1 0.0.0.0 UG 100 0 0 wlan0 0.0.0.0 10.0.0.1 0.0.0.0 UG 100 0 0 eth0 10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 172.16.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 How can I set up /etc/network/interfaces to have only one default gateway, on the interface I want? Worst case scenario, how can I at least control which one gets on top on the route -n command, each boot? Note: This box will travel a lot, and will be connected to different networks, so I don´t know in advance the IP addresses/ranges it will have. Sometimes the default gw interface will be eth0. Sometimes it will be wlan0 ... So, this needs to be kind of automatic ...

  Read the article

• Determine if the "yes" is necessary when doing an SCP

  - by glowcoder

  I'm writing a Groovy script to do an SCP. Note that I haven't ran it yet, because the rest of it isn't finished. Now, if you're doing an scp for the first time, have to authenticate the fingerprint. Future times, you don't. My current solution is, because I get 3 tries for the password, and I really only need 1 (it's not like the script will mistype the password... if it's wrong, it's wrong!) is to pipe in "yes" as the first password attempt. This way, it will accept the fingerprint if necessary, and use the correct password as the first attempt. If it didn't need it, it puts yes as the first attempt and the correct as the second. However, I feel this is not a very robust solution, and I know if I were a customer I would not like seeing "incorrect password" in my output. Especially if it fails for another reason, it would be an incredibly annoying misnomer. What follows is the appropriate section of the script in question. I am open to any tactics that involve using scp (or accomplishing the file transfer) in a different way. I just want to get the job done. I'm even open to shell scripting, although I'm not the best at it. def command = [] command.add('scp') command.add(srcusername + '@' + srcrepo + ':' + srcpath) command.add(tarusername + '@' + tarrepo + ':' + tarpath) def process = command.execute() process.consumeOutput(out) process << "yes" << LS << tarpassword << LS process << "yes" << LS << srcpassword << LS process.waitfor() Thanks so much, glowcoder

  Read the article

• ADSL Modem/Router sometimes hands out incorrect IP addresses

  - by Peter Keevill

  My setup is as follows:- Main ADSL modem / router (switch) configured as DHCP server with address range 192.168.0.25-60 The office machines are configured with fixed IP ( not in the same address pool of course ) and hard wired to this router. A wireless access point ( Router ) is connected to provide Internet access for guests in a separate area. This router is NOT configured as a DHCP server. Wireless authentication is turned off. IP address lease times are set to 4 hours. Sometimes guests are able to connect to the wireless access point but they are not given a valid IP. They get 169.x.x.x addresses. Rebooting their machines does not resolve the problem. The only way to resolve is to reboot the main ADSL/router which is often frustrating for other users who are successfully connected with valid IP and DG. The problem seems to occur more frequently to Apple/Mac guests although it also sometimes occurs with Win machines. I personally use Ubuntu on my Laptop and thus far, never have had any problem connecting and getting a valid IP address in the guest area. One further point of note which may give a clue is that certain guests ( always Apple/Mac ) get lease times of 90 days. However, this does not 'stack out' the number of available addresses and of course, rebooting the router clears them until the next time they login.

  Read the article

• Switched from DVI to HDMI, possible audio artifacts?

  - by I take Drukqs

  I'm using an ASUS VH236H monitor and an EVGA GeForce 570 GTX both of which are brand new. My monitor has an audio out port for speakers/headphones so I plugged in my headphones and made a random selection from my library when I noticed two things: There are static-like artifacts during "louder" parts of songs. There's what seems to be a volume cap in place. When I crank the volume past 100% in VLC the decibel level does not truly increase but the amount of static does. The cable is not new; I yanked it off of my PS3 when my DVI cable broke. It has been used a good amount on my HDTV and PS3 so I doubt it's a matter of burn-in. I like the way the setup works with an HDMI cable as opposed to DVI because my headphones barely reach my rig whereas I have plenty of slack when they're plugged into my monitor. Thanks in advance for any support. Note: I'm using a high quality HDMI cable from monoprice, AKG K702 headphones, and VLC media player.

  Read the article

• A tale of two user ids: Why does NFS not recognize a new user id?

  - by user76177

  I have two servers running RHEL6. The main server, which I will refer to as server, is a database server. The application server, which I will refer to as client, mounts a directory from server via NFS. There is a user, appuser, on both client and server. However, appuser's id on client is 502. appuser's id on server is 506. Both users need read and write capability on the NFS share. To facilitate this, I made the share owned by appuser on server. Of course, client does not recognize that ownership, since appuser has a different id on client. So I did the following: Changed id of user in /etc/passwd on client to be 506 **Changed ownership of appuser's $HOME on client to be appuser again so that I could log in. Now, when I go to look at the NFS share from the client side, I see that it is owned by 502. 502 is the OLD id for appuser on client. I can't change ownership of the NFS share from client, since that is a volume that physically resides on server. I need to make sure that the NFS share shows ownership of appuser from both server and client. What step have I missed since changing the appuser id on client? NOTE: I have not rebooted client or done anything else yet.

  Read the article

• Can any iSCSI NAS appliance replicate / clone a LUN to an external drive?

  - by Boden

  I would like to backup using Windows Imaging to some kind of NAS appliance. I believe this will require the NAS to support iSCSI. I would then like the appliance to support the replication of the iSCSI LUN to an external eSATA or USB disk connected directly to the appliance. I've found plenty of NAS appliances that can do iSCSI and replicate to an external drive, but none that I've found thus far can do both at once. That is, the devices can do iSCSI, but then the replication feature doesn't work. The idea here is to backup to an appliance located in a secure office far away from the server room. Offsite backups to external hard drive could be managed from the appliance. The benefits of such a setup would be: 1) very unlikely that fire or random theft would affect both server-room backup and "remote" backup appliance 2) offsite backups could be managed by multiple trusted people without granting access to server room 3) Windows imaging provides poor man's deduplication, so each backup volume can contain a decent backup history. I understand why this would be a non-trivial thing to implement, but I'm wondering if such a thing exists? Preferably a tabletop, low to medium cost device. Alternative solutions welcome. NOTE: I'm backing up very few but very large files, so file replication is not a good option.

  Read the article

• iptables configuration under ubuntu

  - by aioobe

  I'm following a tutorial on setting up a dns-tunnel. I've run into the following instruction: Now you need to enable forwarding on this server. I use iptables to implement masquerading. There are many HOWTOs about this (a simple one, for example). On Debian, the configuration file for iptables is in /var/lib/iptables/active. The relevant bit is: *nat :PREROUTING ACCEPT [6:1596] :POSTROUTING ACCEPT [1:76] :OUTPUT ACCEPT [1:76] -A POSTROUTING -s 10.0.0.0/8 -j MASQUERADE COMMIT Restart iptables: /etc/init.d/iptables restart The problem is that I don't have any /var/lib/iptables/active. (I'm on ubuntu.) How can I accomplish this? I suspect that I should just interact with the iptables command somehow but I have no clue what to write. Best would probably be if I could put the commands in a script somehow I suppose. (A side-note. If I execute a few iptables-commands it wont be there for ever, right? The rules will be discarded on reboot?)

  Read the article

• Windows 7 Automatically Connecting To Unsecured Wireless Networks On Startup

  - by Xtend

  Most of the questions on this topic related to folks connecting to somebody else's wireless network when their own was available and could remedy the situation by going to their connections and unchecking the "connect automatically" box. See this: " Avoid automatically connecting to wireless network on windows 7 " as an example. In my situation, I've noticed that Win 7 will automatically connect to any unsecured wifi network - even if I have never connected to it in the past. If I am traveling and boot Win 7, it will start and connect to what appears to be the best signaled unsecured network without prompting me for confirmation (note: in the above link, "Naveen" seems to have same problem). Obviously, that is a security concern to me. Further, when I open "Network and Sharing" and "Manage wireless networks" the network is not displayed (probably because I labelled it a public network). Again, these are new, never connected with before, wireless networks. I always promptly disconnect from them but don't want to have to be on constant guard for an auto connection to a malicious network. This began about a month ago, as I recall, Win 7 did not behave like this in the past, I didn't monkey with wifi settings, and don't use a 3rd party connection manager. I did have to download some internet security certificates for army website access but I don't think that should mess with network settings. Any ideas how I can tell Win7 cease automatically connecting to networks or, at least, to prompt me for a confirmation before connecting?

  Read the article

• Setting up xpra for client use in OS X

  - by Jonathan

  I've been trying to get xpra to run on OS X for the last few days to connect to my Ubuntu server. Note that there's a GUI for it called shifter, but that (at least on OS X) is still far too buggy. For those who don't know what xpra is, if you know what screen is, it's like screen for GUI X Windows apps tunneled over ssh. You can render a remote X app locally so it's faster than sending a series of compresses screen shots (like VNC), but with xpra you can disconnect and reconnect on different computers. To get the basic functionality you can just type "ssh -X server.location" and any GUI app you open from the command line will open locally. I've been able to get xpra to build by doing the following: Download pari-all-0.0.6.tar.gz from the xpra site listed under upstream and untar it. Issue the following Mac Ports command (Dependencies thanks to RogBlog): sudo port install python25 python26 py26-pyrex py26-gtk xorg-libXtst py25-gobject py25-gtk py25-nose py26-nose xorg-libXdamage xorg-libXcomposite xorg-libXtst xorg-libXfixes In the upstream list of v0.0.06 patches (NOT 0.0.8pre!) on the xpra site listed above, download mswindows-conditional-pyrex.patch. Open the patch with your favorite text editor and change the single occurrence of "win" in it to "darwin". Apply the patch to setup.py. Run do-build in the command line. Now where I'm stumped: how do I run xpra? The build produces a sub directory called install/bin in which xpra is located, but when I try to run it I get the following error: Traceback (most recent call last): File "./xpra", line 4, in import xpra.scripts.main ImportError: No module named xpra.scripts.main There is a file called main.py under xpra/scripts, but I don't know any python and I'm not sure if this is what it's looking for, and what to do with it even if it is. My goal is to set up xpra so I can install it into /usr/bin (or some other common path for executables) and execute it whenever I please. What do I do next?

  Read the article

• Pivot table not refreshing sort order

  - by William Anthony

  I have Pivot Table that get its data source from another sheet, same workbook. I want the sort order of data is same as the data source order, I choose "Sort in data source order" in Pivot Table option. The problem is, when I change the data order on data source worksheet, then I refresh the Pivot Table, the sort order didn't change. I googled that the Pivot Table should be unlink first then re-link again in order to work properly, so I tried the following: The original data source has named range: origdata. The fake data source has names range: dummydata I changed manually data source to dummydata then changed back to origdata. The sort order did change as expected. Now I want to make the operation automated, so I'm using this code in Worksheet.activate event. Note that, PT is PivotTable instance. ... PT.SourceData = "dummydata" PT.RefreshTable PT.SourceData = "origdata" PT.RefreshTable ... Change data source from VBA didn't change the sort order just like I did with manual method. Why is that? Am I missing something? Maybe there are some routine called when I changed the data source manually via toolbar button? Thanks in advance for your help.

  Read the article

• Hyper-V vss-writer not making current copies

  - by Martinnj

  I'm using diskshadow to backup live Hyper-V machines on a Windows 2008 server. The backup consists of 3 scripts, the first will create the shadow copies and expose them, the second uses robocopy to copy them to a remote location and the third unexposes the shadow copies again. The first script – the one that runs correctly but fails to do what it's supposed to: # DiskShadow script file to backup VM from a Hyper-V host # First, delete any shadow copies of the drives. System Drives needs to be included. Delete Shadows volume C: Delete Shadows volume D: Delete Shadows volume E: #Ensure that shadow copies will persist after DiskShadow has run set context persistent # make sure the path already exists set verbose on begin backup add volume D: alias VirtualDisk add volume C: alias SystemDrive # verify the "Microsoft Hyper-V VSS Writer" writer will be included in the snapshot # NOTE: The writer GUID is exclusive for this install/machine, must be changed on other machines! writer verify {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de} create end backup # Backup is exposed as drive X: make sure your drive letter X is not in use Expose %VirtualDisk% X: Exit The next is just a robocopy and then an unexpose. Now, when I run the above script, I get no errors from it, except that the "BITS" writer has been excluded because none of its components are included. That's okay because I really only need the Hyper-V writer. Also I double checked the GUID for the writer, it's correct. During the time when the Hyper-V writer becomes active, 2 things will happen on the guest machines: The Debian/Linux machine will go to a saved state and restore when done, all fine. The Windows guests will "creating vss snapshop-sets" or something similar. Then X: gets exposed and I can copy the .vhd files over. The problem is, for some reason, the VHD files I get over seems to be old copies, they miss files, users and updates that are on the actual machines. I also tried putting the machines in a saved sate manually, didn't change the outcome. I hope someone here has an idea of how to solve this.

  Read the article

• Unable to connect to FTP - Connection timeout after MLSD

  - by Afrosimon

  So here is my problem, I'm absolutely unable to connect to a FTP server, in circumstances I've never seen before. Here is the situation : I get a "Connection timed out" just after the MLSD command. I usually use Filezilla, under Ubuntu, but to make sure the problem isn't related to this particular client I tried a few others : gftp on ubuntu and winscp and freeftp on windows 7. All the same result. Also made sure to try with Active or Passive modes. Same result. At this point I would be inclined to think there is something wrong with my current network (furthermore, according to a coworker the FTP server is OK). But I did check with http://ftptest.net/ and I am able to get the directory listing (which I'm not able to through a FTP client). So in the end the last thing I didn't tried is to go on another network, solution which seems would work, but wouldn't be very practical in the long run. And thus I guess there's something wrong with my router... but what could it possibly be? Note : I did try to register and post this question on filezilla's board first... but I can't create an account with a gmail nor hotmail account. WTF?

  Read the article

• Microsoft Access: computer freezes when user tries to update record

  - by CarlF

  A colleague and I have developed an Access 2003 database which is used throughout our department. Currently about four dozen people do data entry using one of two very similar forms. If 47 of us use them, they work perfectly. If Mr. 48 clicks the "Save" button, Windows XP freezes and a hard reset is needed. The problem has to be on his specific computer (Dell latitude D630) and not in the code because this problem only affects him. Complicating the matter: I don't work for IS, and this project is not supported by IS. If I'm going to get our tech support to fix the problem I had better be able to explain exactly what to do and how to do it, because they aren't going to invest any resources. I don't even have admin rights on the computer (and neither does its regular user). I've asked him to bring his laptop the next time he visits my building. (Just to make matters worse, he doesn't usually work in the same location as me or the other developer.) Any suggestions on debugging the problem? My first try will be to uninstall and reinstall Office, which I can do using corporate utilities without being admin. Note: yes, those are old versions of Office and Windows. We expect to upgrade later this year.

  Read the article

• Is this normal or does my AVG anitivirus have a virus? [closed]

  - by user390480

  Possible Duplicate: Computer is infected by a virus or a malware, what do I do now? [Note: This is not a duplicate and should not be closed as a duplicate as this is nothing like the other question. I am not asking if I have a virus, nor am I asking "what do I do now". I know that I have a virus and I know what to do. However, I am asking if these are normal AVG ads or if it has been taken over.] My Windows XP PC started acting strange and I am right now actually in Linux running off of a USB drive. I am running Avast under Linux and it has discovered some viruses on my XP drive. Some of the strange things happening in XP were: I could not get to Google.com My Hosts file was set to hidden and read only My Hosts file had an entry of ::1 And AVG had ads in it I've never seen before. Maybe it is normal but I Binged for AVG anti-virus and become.com but found no information. (The red lines and question mark are by me) Any thoughts?

  Read the article

• Block SMTP session with sender domain which doesn't itself accept SMTP connection.

  - by bignose

  I'm administrating a mail service for a small business. Their mail host's internet connection is an ADSL service with a permanent IP address. Unfortunately, many misconfigured mail systems will happily deliver to this host, but, when the host attempts to send mail back (e.g. a bounce notice, or a normal response from someone), the declared sender's domain has an MX which refuses to receive connections from this host. That misconfiguration makes their system a one-way mail sender, which is a problem. How can I configure Postfix on this customer's mail host to refuse SMTP sessions that declare a sender domain which itself refuses SMTP from this host? That is, if the SMTP client declares a domain that we can't make SMTP connections back to, then there's not much point accepting the incoming connection in the first place. Note that I'm not, as some commenters have assumed, talking about checking whether the SMTP client will receive messages. The check I want is whether the declared sender's domain (regardless of who the current SMTP client is) will accept SMTP connections from here. In other words: when we get around to sending a message back, we'll need the sender's domain to accept SMTP connections; I want to do that check before accepting the incoming session. I'm imagining a late check (after the low-cost checks to winnow most of the rubbish connections) that keeps the client on the other end while it attempts an SMTP client connection back to the declared domain of the sender. If that connection is rejected, the incoming one is also rejected. I'm also open to other suggestions for how this problem might be addressed (short of not using this mail host at all, which isn't an option).

  Read the article

• error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7]

  - by brazorf

  This error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7] error is happening after i changed router. Actually, i found out that this error just happens on a ctrl+c signal, so it could be not representative about the error itself. The command i run is very basic: rsync -avz --delete /local/path/ username@host:/path/to/remote/directory Basically, the rsync just stuck there and nothing's happening, until i ctrl+c. After interrupting the process i got the error in subject. I past the whole thing here: rsync -avvvvz --delete /source/path/ username@host:/path/to/direectory cmd=<NULL> machine=HOSTNAME user=username path=/path/to/direectory cmd[0]=ssh cmd[1]=-l cmd[2]=username cmd[3]=HOSTNAME cmd[4]=rsync cmd[5]=--server cmd[6]=-vvvvlogDtprze.iLsf cmd[7]=--delete cmd[8]=. cmd[9]=/path/to/direectory opening connection using: ssh -l username HOSTNAME rsync --server -vvvvlogDtprze.iLsf --delete . /path/to/direectory note: iconv_open("UTF-8", "UTF-8") succeeded. ^C[sender] _exit_cleanup(code=20, file=rsync.c, line=541): entered rsync error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7] [sender] _exit_cleanup(code=20, file=rsync.c, line=541): about to call exit(130) The authentication runs on ssh via rsa key. I tried basic troubleshoot such as: ping the remote host ssh -l username remote.host check software firewall logs i asked the remote host sysadmin to check for logs, and when i run that command a ssh connection is actually being established and i can state there is no comunication/authentication/name resolution issue here. Rolling back to old router make this work again. Both client and server are running ubuntu 10.04. Try to take a look at my router configuration, where i'm no experienced at all, but i didnt see any "suspect" (what i was looking for is firewall blocking something) setting. The router itself is DLINK DVA-G3670B. Any suggestion? Thank You F.

  Read the article

• Do eSATA HDD docking stations have a capacity limit?

  - by Michael Kjörling

  I'm looking at perhaps buying an eSATA docking station to be able to easily plug in and unplug hard disk drives, particularly but not necessarily only for backup purposes. Note: This is not a hardware shopping recommendation question. Please don't vote to close it as such. Looking at different models, I find for example this page detailing the Deltaco SI-7908SUS which specifically states "storage capacity: 1.5 TB" as well as "pictured hard disk not included, only for illustration". A customer review specifically mentions that it does not work with 3 TB drives, although does not go into any detail such as OS, drive model, etc. From a brief glance, the vendor's web site does not appear to say either way. Then there is the quite similar Deltaco SI-7908B3 which boasts on the box "all 2.5" and 3.5" HDD/SSD compatible". My question is: Why would what basically amounts to a SATA/eSATA adapter have any say in what storage capacity devices are supported? Does it? Assuming the OS supports the full capacity of the drive, why should introducing another (not even a different, really) connector change anything? Bonus question: Might it make a difference if the docking station exposes multiple interfaces (such as in the case of for example the SI-7908SUS exposing USB 2.0 and eSATA)? (I still think it shouldn't, but it'd be nice to have it confirmed.)

  Read the article

• How to enable hotlink protection without hardcoding my domain in the Apache config file?

  - by Jeff

  Been surfing around for a solution for a couple days now. How do I enable Apache hotlink protection without hardcoding my domain in the config file so I can port the code to my other domains without having to update the config file every time? This is what I have so far: RewriteCond %{HTTP_REFERER} !^$ RewriteCond %{HTTP_REFERER} !^http://www\.example\.com [NC] RewriteRule \.(gif|ico|jpe|jpeg|jpg|png)$ - [NC,F,L] ... And this is what Apache suggests: SetEnvIf Referer example\.com localreferer <FilesMatch \.(jpg|png|gif)$> Order deny,allow Deny from all Allow from env=localreferer </FilesMatch> ... both of which hardcode the domain in their rules. The closest I came to finding any info that covers this is right here on ServerFault, but the conclusion was that it cannot be done. Based on my research, that appears to be true, but I didn't find any questions or commentary dedicated soley to this question. If anyone's curious, here is the link to the Apache 2 docs that cover this topic. Note that Apache variables (e.g. %{HTTP_REFERER}) can only be used in the RewriteCond text-string and the RewriteRule substitution arguments.

  Read the article

• Using ACK to list directories

  - by KPthunder

  I have a directory listing as follows (given by ls -la): total 8 drwxr-xr-x 6 <user> <group> 204 Oct 18 12:13 . drwxr-xr-x 7 <user> <group> 238 Oct 18 11:29 .. drwxr-xr-x 14 <user> <group> 476 Oct 18 12:31 .git -rw-r--r-- 1 <user> <group> 601 Oct 18 12:03 index.html drwxr-xr-x 2 <user> <group> 68 Oct 18 12:13 test drwxr-xr-x 2 <user> <group> 68 Oct 18 12:13 test2 Running ack . -f prints out the files in the directory: index.html How can I get ack to print out the directories in the directory? I want to ignore the .git directory (which I understand is default behavior for ack). On that note, how can I ignore certain directories? I am using ack 1.9.6 on Mac OSX 10.8.2.

  Read the article

• iSCSI performance questions

  - by RyanLambert

  Hi everyone, apologies for the long-winded post in advance... Attempting to troubleshoot some iSCSI sluggishness on a brand new vSphere deployment (still in test). Layout is as such: 3 VSphere hosts, each with 2x 10GB NICs plugged into a pair of Nexus 5020s with a 10gig back-to-back between them. NICs are port-channeled in an active/active redundant fashion (using vPC-mac pinning for those of you familiar with N1KV) Both NICs carry service console, vmotion, iSCSI, and guest traffic. iSCSI is on a single subnet/single VLAN that is not routed through our IP network (strictly layer2) Had this been a 1gig deployment, we probably would have split the iSCSI traffic off onto separate NICs, but the price/port gets rather ridiculous when you start throwing 4+ NICs to a server in a 10gigabit infrastructure, and I'm not really convinced it's necessary. Open to dialogue/tech facts re: this, though. At this point even a single VM guest will boot slowly to iSCSI storage (EMC CX4 on the same Nexus 5020 10gig switches), and restores of VMs from iSCSI take about twice as long as we'd expect them to. Our server folks mentioned that if we split the iSCSI off onto its own NIC, performance seems significantly better. From a network perspective, I've run through the variables I can think of (port configuration errors, MTU problems, congestion etc.) and I'm coming up dry. There really is no other traffic on these hosts other than the very specific test being performed at the time. Important thing to note is that guest traffic works just fine... it seems storage is the only thing affected by whatever gremlin exists. Concluding that we're not 'overutilizing' the network infrastructure since we're doing hardly anything, I'm just looking for some helpful tips/ideas we can use to resolve this... preferably without hurling extra 10gig NICs that are going to sit around 10% utilization while we've got 70+% left on our others.

  Read the article

• Backup solution to backup terabytes and lots of static files on linux server?

  - by user28679

  Which backup tool or solution would you use to backup terabytes and lots of files on a production linux server ? Note that the files are all different and almost never modified, and usage is mostly adding files, so data volume is today 3TB growing all the time at around +15GB/day. Please do not reply rsync. Basic unix tools are not enough, rsync does not keep history, rdiff-backup miserably fails from time to time and screw the history. Moreover these are all file based backup, which put a lot of IOwait just to browse directories and query stat(). But i guess, except R1Soft CDP, there is no way around that. We tried R1Soft CDP backup, which is block level backup, and it proved good and efficient for all our other servers, but systematically fails on the server with 3 terabytes and gazillions of files. That is already more than 2 months that the engineers of R1Soft and datacenter are playing a hot ball game... and still no backup except regular rsync We never tried big commercial solutions, except R1Soft CDP since it was provided as an optional service by the datacented hosting our servers.

  Read the article

• FTP Server with advanced features

  - by Nikolas Sakic

  Hi, We supply zone-files to our customers. Some zone files are big about 300MB and some are quite small, maybe like 1MB. We had this issue that someone setup a script to continually download the file. Imagine downloading 300MB file a few hundred times a day. Since, we don't have packet-shaper to throttle the traffic, we need to upgrade ftp server and use add-on modules to limit the download somehow. We currently use proftpd server. Also note that there are different users for different domains - say, if you want to download zone file for .INFO domain, then you use a particular user. That user can't download any other zone's file. This is what we are looking for: Have maximum of 400MB download per user per day. Or even have different download limit for different users per day. Have one connection per user at any time. Max # of connection (non-simultaneous) per user per day is 5. Anyone trying to exceed that gets banned for 24 hours. Has anyone used FTP server with similar restrictions above? Does anyone have any ideas where I can start? Any help would be appreciated. Thanks. -N

  Read the article

• Reliable custom Windows shortcut keys?

  - by Peter Baer

  I have global Windows shortcut keys assigned to several different cmd.exe instances. I do this by creating shortcuts to cmd.exe on my desktop, and assigning each one a unique shortcut key (for example, CTRL + SHIFT + U). Pretty basic stuff. I'm using Win2K8 (R1 and R2). This works just fine... most of the time. But with infuriating regularity, sometimes it doesn't. Or it will work with a long delay (many seconds). It doesn't matter what app currently has focus (it can even be one of the command prompts). It doesn't matter what keys I assign (I've tried a few variations of WIN, CTRL and SHIFT). I did notice that this is often, but not always, correlated with explorer.exe struggling in some way or another (say, an explorer window opened to a file share that's unavailable, or an app being unresponsive, or whatever). In other words the shortcut key handling appears to be very sensitive to unrelated system activity. Note that whenever I have this problem I can always successfully ALT + TAB to the window I want to get to, but that's tedious. I use the shortcuts to these command windows hundreds of times a day so even a 1% failure rate becomes really annoying. Is there a way to fix this, or is there some third-party utility out there that will RELIABLY intercept custom key combinations to bring focus to whatever apps I want, in a way that is independent of other system activity? ADDENDUM: There is a property of the Windows shortcuts that I would not want to lose if switching to a third-party hotkey tool: Windows shortcuts are idempotent. Once you've launched a shortcut to some app, pressing the shortcut key combo again takes you to the already launched process - it does not launch a new process.

  Read the article

• cannot connect to vpn server (error 721)

  - by callmeblessed

  Hi I got 2 internet connections in my computer. One is using 3.5G HSDPA modem (vodafone huawei e220) and the other using mobile phone (cdma zte c261). Both are using different ISP and i have both. at the moment, i can connect to my office vpn using the HSDPA modem one. But when i tried to use cdma modem (dial up - mobile phone modem), i am just able to get "verifying username and password" and then after a few minutes it display error : Error 721 The Remote Computer didn't respond. I tried to ping into my office ip address, it got good result but still cannot connect to the vpn. I tried to turn off all my firewall (i'm using commodo) and has no response as well. In my cdma mobile phone modem Network connections I tried to allow iNternet connection sharing as well ... and turn on all Internet Protocol TCP/IP, File & Printer Sharing & Client for microsoft networks. But all of my effort has no effect. How to fix this problem ? note: my office using windows vpn as well. thank you .

  Read the article

< Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >