Search Results

Search found 12089 results on 484 pages for 'rule of three'.

Page 367/484 | < Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >

  • Wipe free space on LVM-LUKS (dm-crypt) Volume

    - by peter4887
    My three partitions for my system are created with LVM on a LUKS partition (dm-crypt). These are /home, / and swap. The filesystem is ext4. They are encrypted, because they are on my laptop and I don't want that some laptop thieves get my data. But I often share my laptop with other people so they can access my encrypted partitions. I don't want that these people can recover my cache and all the data I deleted. So I'm now trying to wipe all my free space on /home to prevent against recovering with tools like photorec. (one overwrite should do, the need of multiple overwriting is just a rumor) But still I haven't found any solution to wipe this free space successfully. I tried dd if=/dev/zero of=/home/fillitup bs=512 count=[count of free sectiors] so my partition was complete full of data. df /dev/mapper/home said 100% is used and there are 0 sectors available. But I could still recover gigs of data with photorec, although I selected to recover just form the free space. photorec displays: /dev/mapper/home - 340 GB / 317 GiB (RO) , but df displays that the size of /home is just 313G, why are there these differences and what did the 340GB means? It looks like there is a place on my /dev/mapper/home partition, that I can't access to overwrite, but I can access it to recover. I also checked for corrupted sectors, but there aren't any. Maybe this is the space between my existing files? Did anyone knows why I can't wipe my free space with dd, and how I can find the location of the loads of recoverable files, to securely delete them?

    Read the article

  • Cannot change power button or lid close action

    - by Mark Henderson
    I have a Samsung 900x laptop and I want to change it so that when I close the lid, nothing happens (I often close the lid to carry it somewhere 10 seconds away, and by putting it into suspend it cancels any active downloads/etc). Easy, right? Go to Power Options and change it there; just like on every other laptop in the world. Not so fast: Saywhat?! That message only shows up for the nodes for Lid Close Action, Power Button and Sleep Button. I can change every other setting except for those three. I'm definately an Administrator on the computer, and I've googled the error and found dozens of hits on other crappy forums, but of course nothing on those worked (otherwise, I wouldn't be here). And as ususal the "Why can't..." hyperlink gives no useful infomation what so ever (just a generic Help document). So - how can I change what closing the lid does? I will modify the registry directly if I have to.

    Read the article

  • How to prevent the command prompt from closing after execution?

    - by Sk8erPeter
    My problem is that in Windows, there are command line windows that close immediately after execution. To solve this, I want the default behavior to be that the window is kept open. Normally, this behavior can be avoided with three methods that come to my mind: Putting a pause line after batch programs to prompt the user to press a key before exiting Running these batch files or other command line manipulating tools (even service starting, restarting, etc. with net start xy or anything similar) within cmd.exe(Start - Run - cmd.exe) Running these programs with cmd /k like this: cmd /k myprogram.bat But there are some other cases in which the user: Runs the program the first time and doesn't know that the given program will run in Command Prompt (Windows Command Processor) e.g. when running a shortcut from Start menu (or from somewhere else), OR Finds it a little bit uncomfortable to run cmd.exe all the time and doesn't have the time/opportunity to rewrite the code of these commands everywhere to put a pause after them or avoid exiting explicitly. I've read an article about changing default behavior of cmd.exe when opening it explicitly, with creating an AutoRun entry and manipulating its content in these locations: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Command Processor\AutoRun HKEY_CURRENT_USER\SOFTWARE\Microsoft\Command Processor\AutoRun (The AutoRun items are _String values_...) I put cmd /d /k as a value of it to give it a try, but this didn't change the behaviour of the stuffs mentioned above at all... It just changed the behaviour of the command line window when opening it explicitly (Start-Run-cmd.exe). So how does it work? Can you give me any ideas to solve this problem?

    Read the article

  • zfs pool error, how to determine which drive failed in the past

    - by Kendrick
    I had been copying data from my pool so that I could rebuild it with a different version so that I could go away from solaris 11 and to one that is portable between freebsd/openindia etc. it was copying at 20mb a sec the other day which is about all my desktop drive can handle writing from the network. suddently lastnight it went down to 1.4mb i ran zpool status today and got this. pool: store state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://www.sun.com/msg/ZFS-8000-9P scan: none requested config: NAME STATE READ WRITE CKSUM store ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 c8t3d0p0 ONLINE 0 0 2 c8t4d0p0 ONLINE 0 0 10 c8t2d0p0 ONLINE 0 0 0 it is currently a 3 x1tb drive array. what tools would best be used to determine what the error was and which drive is failing. per the admin doc The second section of the configuration output displays error statistics. These errors are divided into three categories: READ – I/O errors occurred while issuing a read request. WRITE – I/O errors occurred while issuing a write request. CKSUM – Checksum errors. The device returned corrupted data as the result of a read request. it was saying low counts could be any thing from a power flux to a disk event but gave no suggestions as to what tools to check and determine with.

    Read the article

  • Centralized backup method recommendation for SMEs with various OSes

    - by Akinator
    Hi I was wondering what in your opinion is the "best" method for having "everything" backed-up in the following situation. We are a SMEs with 10 computers in total. Three of those computers are MACs The rest are windows (1 vista, 4 win7 and 2 XPs) I'm very open to what the method should be but you should also consider the follwing: Very limited resources Quite "small" bandwidth (4 MBs for all (download) 0.4 MBs (upload, yep, thats it)- though this might get, a little bit better) One of the main thing to back up would be the mails, considerations: All windows computers use outlook, mainly 2003 There is one mac that uses outlook too (for mac of course - not 2011 yet) We also have to backup the files: Not a huge amount Very few very big files Very organizes (by machine) What I would like is to hear your opinions as to which would be the best method (or combination of methods - preferably one of course) considering. We are not sure what do we need and I'm open to suggestions, though an online (cloud based applications) would be great, remember the the bandwidth is unbearable. Last think to consider, it that we would like to do weekly updates (unless the method is very easy of course). Thanks in advance!! I tried to be as specific as possible, but if anything is needed I'll gladly update, please ask for any clarification needed! Please avoid any answers like upgrade all to windows 7 and throw away your macs :) our's may not be an ideal situation, but it is what it is, and right now, it would be impossible for us to change it for a lot of circumstances.

    Read the article

  • Hyper-V snapshots – unable to start VM

    - by ahmedz
    I restarted my Host server after shutting down three guest VMs. After I restarted the machine I tried to start the VMs and got an error stating the the VM failed to start. SERVERNAME failed to start. Attachment 'avhd file path' is read only. Please provide read/write access to the attachment. Error: 'General access denied error' SERVENAME failed to start. (virtual machine ID 17292200-wd22-dd22-d23-dddddd2222) The issue seems to be with the disk space. The VHD file for this VM is 128 GB and there are two AVHD files of 58 and 75 GB. Whereas the total disk space on this drive (E) is 280 GB - the free space is only around 23 GB. I understand that the error is caused by the unavailability of the required disk space. Unfortunately, I cannot increase the disk space on this drive. However I have another drive (D) that has 400 GB of free space. I exported this VM to D drive and then tried to add the copied AVHD files but it gives me a similar error. I am running Windows Server 2008 R2 Datacenter. Any help is appreciated.

    Read the article

  • 64-bit Windows 7 gets stuck on logo screen on bootup

    - by Richard B
    I've had a PC running Windows 7 in my office which I'm not using at the moment (cause I'm working elsewhere as a consultant atm), I'm only accessing the PC using Team Viewer (http://www.teamviewer.com/) which means the PC has been running for quite some time now. I've restarted it maybe twice a week though. A few days ago I couldn't access it using Team Viewer and when I got to the office the screen was black with only the mouse pointer showing. The PC has four hard disks, three of them (all 1Tb) is using RAID 5. This is what I've done so far: I reboot and everything seems to load correctly. I get to a screen that gives me two choices - boot Windows normally or perform a startup repair. Choosing to boot Windows only gets me to the Windows 7 logo screen which only animates over and over again. Choosing to repair gets me to the repair screen that "checks for problems" and then it gets stuck on the "Attempting repairs..."-screen (I let it run for about 24 hours before giving up). What is the next step to take? I don't have any backups and no system restore points saved. I can access files and folders through a terminal window using a Windows 7 DVD so I guess nothing is lost yet... Please help me, thanks!

    Read the article

  • Reduce size of MP4

    - by testing
    I have a MP4 file with a lengh of 22:44. Here are the details: Video: width: 720 px height: 404 px data bitrate: 1022 kBit/s overall bitrate: 1182 kBit/s fps: 24 codec: H264 - MPEG4 AVC (part 10) (avc1) Audio: bitrate: 159 kBit/s stereo sample rate: 48 kHz codec: MPEG AAC Audio (mp4a) I thought I can reduce the current filesize (about 200 MB) by reducing the width and the height (420 x 236). I tried different programs: Handbrake, Format Factory, Next Video Converter and Super. The first three didn't worked as expected: Handbrake has a bug by setting the width and the height, the next two doesn't allow the fine setting of the videosize (only presets of width and height). Super seems to be the best, but I didn't found a setting which reduces the file size. I reduced the width and the height but only got 20 MB less. Now I tried the xth setting and I still get a too high file size. I want to reduce the filesize to 100 MB or less. The ouput format should be FLV or MP4, because I need this for flowplayer. Which settings of SUPER or which program should I use to reduce the file size? Of course the video should still be viewable.

    Read the article

  • Unable to create files in a directory

    - by vamsi360
    I have created a directory in Virutalbox. Using VBoxManage, I am executing a script inside the Ubuntu VM directory I created above from Ubuntu host OS. But if the script in the VM contains commands for creating a new file, they are not executing. "echo" commands before and after the touch ommand are working fine. I even used root user for VBoxManage to install. I think the directory is not allowing the files to be created . How can I make a directory in Linux to be 777 to all new files created automatically. I mean, even if I make the directory (chmod 777 dir), I am unable to execute the script from the host. Please help. It may be simple permissions problem. Even root is unable to execute. VBoxManage guestcontrol "Ubuntu_10_04" execute --image "/bin/bash" "/home/cloudlet/Desktop/temp2/three" --username root --password root --verbose --wait-exit --wait-stdout -- -l /usr Please help. I am struggling with this problem for the past one week.

    Read the article

  • Run 3 monitors on two different video cards?

    - by hullot
    Can I run 3 monitors on two different video cards? I have an ATI and Nvidia brand card. The ATI has 2 HDMI connections. They both work. Both cards are also picked up in Windows, one being the ATI and the other one as the Nvidia, but it says VGA Controller, although the card only takes 2 DVi. So, one DVI cable goes into that Nvidia card. 3 Monitors, but only 2 the HDMI ones from the ATI pick up, not the third one which is connected to the Nvidia via DVI. How can I run three monitors then? I suppose I can't install both drivers, so I'm unsure what to do. Is this possible? I just want the Nvidia card to power the third screen, no gaming on it, nothing. Also the ATI is picked up as primary card as well, so no hurdle there. EDIT: Hm, just installed the Nvidia drivers and it picked up the third screen no problem. Hope there aren't any major conflicts. Will post this as an answer as correct when I'm able. Can't as a new user.

    Read the article

  • Booting Windows from different partition than system

    - by szamil
    I have bought an SSD disk, but my laptop (Dell Precision M6300) refuse to use it as a target disk for windows (AHCPI on/off, BIOS up-to-date). I can't exchange the disk unfortunately... But fortunately, I've managed to install windows using USB disk case. The problem is, that when I put that disk as my internal drive it can't boot. (Disk read error, Three Finger Salute ... ) So I tried with Linux (openSUSE), I manage to install it as well, but when I tried to boot GRUB from internal drive I get errors again. (Should I try GRUB2?) I figured out that I can boot into that internal hard drive's openSUSE system using small USB drive with GRUB, kernel and image on it. So, I just run GRUB from USB drive, it loads necessary stuff from the USB drive and then continues from the internal drive. I want to do the same with Windows. But GRUB (rootnoverify and chainloader +1) does not boot my windows on internal drive. The question: is there any chance to copy the critical windows' boot files into the USB drive, to make it possible to boot from that USB drive, but continue booting from internal (different in general) drive? The USB drive would became a system hardware key! ;-) Disk: Plextor M5S 128GB Sata III, laptop has Sata II, but it's compatible anyway, right?

    Read the article

  • Strange issue in header location redirect

    - by hd01
    I have three websites hosted (example1.com, example2.com, example3.com) on a server. There is a page (test.php) on example1.com with just code below inside it: <?php header('Location:http://example2.com/a.php'); ?> When I browse test.php it goes to http://example1.com/a.php . it doesn't understand it is another domain url, it tried to find the page on itself. but when I put http://google.com instead of example2.com/a.php it works correct. I really get confused. What is the problem ? Should I set some configuration on the server? ( I am administrator of the hosting server ). Ps. The server is behind a pound server. Here's the Firebug Net output for example1.com/test.php Response Headers: HTTP/1.1 302 Found Date: Tue, 09 Oct 2012 09:03:34 GMT Server: Apache/2.2.16 (Debian) Location: http://example1.com/a.php Vary: Accept-Encoding Content-Encoding: gzip Content-Length: 21 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/html; charset=utf-8 Request Headers: Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding gzip, deflate Accept-Language en-us,en;q=0.5 Connection keep-alive Cookie mycookie Host example1.com User-Agent Mozilla/5.0 (X11; Linux i686; rv:14.0) Gecko/20100101 Firefox/14.0.1

    Read the article

  • Need a helpful/managed VPS to help transition from shared hosting

    - by Xeoncross
    I am looking for a VPS that can help me transition out of a shared hosting environment. My main OS is Ubuntu, although I am still new to the linux world. I spend most of my day programming PHP applications using a git over SSH workflow. I want PHP, SSH, git, MySQL/PostgreSQL and Apache to work well. Someday after I figure out server management I'll move on to http://nginx.org/ or something. I don't really understand 1) linux firewalls, 2) mail servers, or 3) proper daily package/lib update flow. I need a host that can help with these so I don't get hit with a security hole. (I monitor apache access logs so I think I can take it from there.) I want to know if there is a sub $50/m VPS that can help me learn (or do for me) these three main things I need to run a server. I can't leave my shared hosts (plural shows my need!) until I am sure my sites will be safe despite my incompetence. To clarify again, I need the most helpful, supportive, walk-me-through, check-up-on-me, be-there-when-I-need you VPS I can get. Learning isn't a problem when there is someone to turn too. ;)

    Read the article

  • Is there any way to shut up my ATI HD 5770?

    - by slpsys
    So to preface, I basically built Jeff's machine; I already had some of the components, including (scarily enough) the exact same case1. I've been buying bits and pieces over the past few months, which coincided perfectly with his recent post about three monitors, though not being a gamer outright, I opted for the second-from-the-bottom option. After finally plopping all the pieces lovingly into the case this evening, I turn it on...and it sounds like four professional grade hair-driers. Some quick regression analysis determined that with the video card out, the running machine sounded no louder than our house's vents. Basically, my last desktop build included a $45-at-the-time graphics card, and it's been Macbook Pros and workstations since then, so I have zero idea whether I'll just be able to tune the fan speed later on. Will I be able to get this thing to quiet down every time I'm not playing Modern Warfare 2 at maximum framerate, or should I just send this thing back now, and get the quietest card in my pricerange? 1 One thing of note is that I do not have noise-absorbing foam in the case, as is pictured in the article. I'm only mentioning that because I suspect it could drop the overall output a few decibels, but obviously not that many.

    Read the article

  • Windows XP Freezes

    - by Jim Fell
    Hello. I'm running a machine with Windows XP Professional 64-bit. Every so often, it will freeze for no apparent reason. That is, everything stops responding, except the mouse. I can move the mouse around, but I can't click on anything. Keyboard input is also not accepted/received when this problem occurs. The three-finger salute fails to bring up the Task Manager. Even pressing the power button on my computer fails to shut it down. The only way out of this that I have found is to hard-reboot the machine (i.e. pull power or hold power button in for 10 seconds). This problem was occurring on the system when it had all its updates and after a fresh install when not everthing was quite yet updated. I've run the Scandisk utility and the latest version Memtest86 that supports 64-bit architecture; neither found any errors. The last time this happened was on a fresh install of Windows. Only Nero Essentials, Avast antivirus (disabled), Firefox, and Spybot were installed. I was not running Nero, Firefox, or Spybot at the time, and Avast was disabled, so I'm pretty certain this is a Windows issue. Is anybody familiar with this problem or have any pointers? Thanks.

    Read the article

  • External HDD connecting via USB disconnects wireless LAN connection

    - by Kensai
    Strange problem. I have this MEDION Akoya PC that has a dedicated bay to slide an external HDD sold separately. It's very handy indeed cause the slot is providing a fast USB 3 connection and power to the HDD unit, without extra cables. All works fine except this show-stopper behavior to disconnect me from the router once I slide in the unit and it powers up. The moment I connect the unit the (normally) three-four WiFi connections I see in my neighborhood disappear and my own to the router loses its signal strength (no Internet traffic is possible). After a while it throws me off that one as well, never to connect me again as long as the unit is powered. Once I disconnect the HDD the various signals come back and it automatically reconnects to my own. What takes? Are we in front of a serious design fault by MEDION here? Does the spinning of the HDD on top of the PC cause electromagnetic interference strong enough to throw off my WiFi connectivity? Is it a simple USB problem? Some kind of strange hardware conflict? Where should I look?

    Read the article

  • How to set up multiple video cards in Windows XP

    - by Swish
    All I am trying to do is run a three monitor setup, two widescreens on the good card at high res and a third smaller monitor at 1024x768 that I watch continuously updating info in. I have a Dell Vostro 200 with an HIS Radeon HD 4670 video card in the PCI-e slot. I need an additional video card that will work in an available PCI slot. I Had a Nvidia GeForce 5200 that was installed but due to what I'm assuming was a compatible driver issue (because it was Nvidia not ATI) it wouldn't run at more than 640x480 4bit color when installed simultaneously with the HIS card. Previously I used the Nvidia with the onboard Intel video to run a third monitor, but now that the HSI uses PCI-e the onboard has to be disabled. I tried a Radeon 9200 PCI card that I found (microsoft made I think) with it and only that or the HIS card could be enabled at the same time. When both were in the HIS card said "The device cannot start". SO, based on the fact that I got the Nvidia to work (although very poorly) with the new HIS Radeon HD 4670 PCI-e I know it's possible, just don't know what type of card I need to use. Any ideas?

    Read the article

  • SSO to multiple websites from Sharepoint website

    - by Aico
    We have an intranet based on Sharepoint 2010. In this intranet we have several links to other webservers within the same Active Directory, for example a link to our Outlook Web Access site on our Exchange 2010 environment. We have three different setups which visit this Sharepoint environment and the other webservers: Windows 7 clients that are a member of the Active Directory Home pc's that connect through a SSL VPN appliance Standalone thin clients (Windows 7 embedded) within the corporate network The goal is to let people only sign in once. In the first group this isn't a problem because the AD Integrated Authentication works fine and the Windows logon is passed on to Sharepoint and the other webservers. The second group is also working fine because of the LDAP integration that the SSL VPN appliance uses. The third group is however experiencing issues. They need to enter their credentials everytime they click a link to another webserver. They first need to enter credentials for accessing the Sharepoint environment. When clicking the link for their webmail they have to re-enter their credentials, and so on. Can someone tell me what the best solution would be to also get SSO working fine for the third group? Some extra information: We also have a Forefront TMG server in our environment. I read somewhere that Forefront might be part of a solution for this problem, but not sure how. Maybe someone here can help me? Look forward to some help. Best regards, Aico

    Read the article

  • Burning Linux ISO to DVD and making it bootable.

    - by toc777
    Hi everyone, I just downloaded the Fedora 14 Live-Desktop ISO and used CDBurnerXP to burn the image to a DVD. For some reason the first time I burned the image nothing showed up on the DVD when I accessed it even though CDBurnerXP said it had successfully burned to the disk. I did it again and the ISO shows up on the disk (I don't think this is right, should it be the files inside the image that show up on disk or the image file??). The problem now is my dell PC can't find the ISO when I try to boot from it. I get an error saying it can't boot from the CD. I have verified the ISO image as directed from the Fedora website. My question is how do I make a bootable CD from a Fedora Live-Desktop ISO? How can I verify that the ISO was written to the CD correctly and has anyone had any issues booting from a CD using a Dell desktop (I'm not at home at the moment so I can't check what model it is but its old enough, I've had it for about 5 years). EDIT: All that needed to be done was to burn the image to CD as an image and not a data file. The first three times failed, I'm not sure if this was because of faulty DVD's or if the write speed was too high (16x). I put in a new DVD and changed the write speed to 8x, the image was then properly burned to the disk without any errors. Thanks.

    Read the article

  • Using Openfire for distributed XMPP-based video-chat

    - by Yitzhak
    I have been tasked with setting up a distributed video-chat system built on XMPP. Currently my setup looks like this: Openfire (XMPP server) + JingleNodes plugin for video chat OpenLDAP (LDAP server) for storing user information and allowing directory queries Kerberos server for authentication and passwords In testing with one set of machines (i.e. only three), everything works as expected: I can log in to Openfire and it looks up the user information in the OpenLDAP database, which in turn authenticates my user with Kerberos. Now, I want to have several clusters, so that there is a cluster on each continent. A typical cluster will probably contain 2-5 servers. Users logging in will be directed to the closest cluster based on geographical location. Something that concerns me particularly is the dynamic maintenance of contact lists. If a user is using a machine in Asia, for example, how would contact lists be updated around the world to reflect the current server he is using? How would that work with LDAP? Specific questions: How do I direct users based on geographical location? What is the best architecture for a cluster? -- would all traffic need to come into a load-balancer on each one, for example? How do I manage the update of contact lists across all these servers? In general, how do I go about setting this up? What are the pitfalls in doing this? I am inexperienced in this area, so any advice and suggestions would be appreciated.

    Read the article

  • Configuring iptables rules for HAProxy and others

    - by MLister
    I have the following relevant settings for HAProxy: defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 500 contimeout 5s clitimeout 15s srvtimeout 15s frontend public bind *:80 option http-server-close option http-pretend-keepalive option forwardfor # ACLs ... I have three backends (including a Nginx server) configured in HAProxy, all listening on different ports of 127.0.0.1. And my iptables config is this: *filter # Allows all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT -i lo -d 127.0.0.0/8 -j REJECT # Accepts all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allows all outbound traffic # You can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allows HTTP and HTTPS connections from anywhere (the normal ports for websites) -A INPUT -p tcp --dport 80 -j ACCEPT -A INPUT -p tcp --dport 443 -j ACCEPT # Allows SSH connections # # THE -dport NUMBER IS THE SAME ONE YOU SET UP IN THE SSHD_CONFIG FILE # -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT My questions are: Would the above iptables config work with the settings/options in my HAProxy config? I am also runnning a postgres and a redis server on the same machine, what settings do I need to adjust for these two to enable them work with iptables?

    Read the article

  • Windows 7 Icons, Buttons, and Tabs corrupted...Professional 32-bit

    - by xhyperx
    The other day, about two or three ago, I was simply typing in a Microsoft Word document when my screen froze. After a few moments, it went black...I thought it was my vid hardware (dual nVidia 9800 GTs). Anyway, I did a hard reboot, and chose to Start Normally. The system blue screened telling me there was a failure in the Memory Manager. So then I thought maybe a RAM failure or vid memory failure. I attempted reboot again, this time I got presented with the option to repair windows...so I went with that. The repair app finished and did an auto reboot. This time I got all the way back to my desktop where in a matter of a about 30 seconds, the system blue screened again and pointed to the Memory Manager as the area of cause. Again I rebooted, the repair thingy came up again and I allowed it to do its thing. Deciding if the same failure occured I'd begin pulling hardware to see at what point I may have found the possibly defective party. However, this time it rebooted, I got back to desktop and no crash. All looked well, untill I looked at the baloon messages when hovering over the System Bar icons. Also when I opened any of my browsers, the tabs had no text, and any window that pops up that has regular buttons (OK, Cancel, etc., etc.) looks weird. The buttons are really really long and have no text. So it seems like the system is once again running smoothly, however something has gotten corrupted.. something relating to drawing basic windows user interface objects. Help...all ideas are respected and appreciated. Have a great day everyone!

    Read the article

  • Nagios escalation debugging

    - by Oesor
    I'm having some issues with escalations happening properly and I'm not sure if it's because of my config or because the nagios binary is nonstandard and something may be broken. I've got little experience with nagios, and just want to make sure this is being set appropriately. Should the following config file definition allow the escalations to take over and increment the notification interval as expected? Is there somewhere else in the config files I should be looking at to figure out what's going on? I've enabled debug 32 in the config and it's simply spitting out 'Host notification will NOT be escalated.' for each notification. The configuration does pass the pre flight check with no issues, and reports that it's parsing the three host escalations in the config. # test host definition define host { host_name test alias test address 10.0.0.10 hostgroups test check_interval 0 retry_interval 1 max_check_attempts 2 flap_detection_enabled 0 icon_image windows.png icon_image_alt LOGO - Windows vrml_image windows.png statusmap_image windows.png action_url /info/host/275 check_period 24x7 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master check_command check_host_15!-H $HOSTADDRESS$ -t 3 -w 500.0,80% -c 1000.0,100% parents nagios notifications_enabled 1 notification_interval 3 notification_period 24x7 notification_options u,d,r use host-global } define hostescalation{ host_name test first_notification 3 last_notification 4 notification_interval 10 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master } define hostescalation{ host_name test first_notification 4 last_notification 5 notification_interval 30 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master } define hostescalation{ host_name test first_notification 5 last_notification 0 notification_interval 240 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master }

    Read the article

  • Windows 7 Icons, Buttons, and Tabs corrupted...Professional 32-bit

    - by xhyperx
    The other day, about two or three ago, I was simply typing in a Microsoft Word document when my screen froze. After a few moments, it went black...I thought it was my vid hardware (dual nVidia 9800 GTs). Anyway, I did a hard reboot, and chose to Start Normally. The system blue screened telling me there was a failure in the Memory Manager. So then I thought maybe a RAM failure or vid memory failure. I attempted reboot again, this time I got presented with the option to repair windows...so I went with that. The repair app finished and did an auto reboot. This time I got all the way back to my desktop where in a matter of a about 30 seconds, the system blue screened again and pointed to the Memory Manager as the area of cause. Again I rebooted, the repair thingy came up again and I allowed it to do its thing. Deciding if the same failure occured I'd begin pulling hardware to see at what point I may have found the possibly defective party. However, this time it rebooted, I got back to desktop and no crash. All looked well, untill I looked at the baloon messages when hovering over the System Bar icons. Also when I opened any of my browsers, the tabs had no text, and any window that pops up that has regular buttons (OK, Cancel, etc., etc.) looks weird. The buttons are really really long and have no text. So it seems like the system is once again running smoothly, however something has gotten corrupted.. something relating to drawing basic windows user interface objects. Help...all ideas are respected and appreciated. Have a great day everyone!

    Read the article

  • Will Windows repair my multi-boot when I format the 1st physical partition with boot sector?

    - by user2353806
    Due to historical reasons I got a laptop with Vista, Windows 7 and Windows Server 2008R2 partitions. (boot from external wasn´t that viable) Nothing (Windows Repair, bootrec /whateveroption) worked when I restored only the Windows 7 and WS2k8 with Acronis TrueImage. Don´t ask me through what idiotic error messages I went during repair tries. (Wrong Windows version,...) So I grudgingly restored all three - with the little additional excursion that I thought changing the active partition to the Windows 7 partition would move the boot sector and let me format the Vista part... Oh no. Seems too logical for MS. (Dunno what I changed, but today it will let me format!) So the real question is: Will formatting the Vista part trash things again beyond comprehension or will Windows Repair bring back the boot rec and remove Vista from the boot options? Or should I just erase all the files to avoid trashing the boot? Where will the boot rec be (after repair) when I format the Vista? On 1st or 2nd partition? And if I get drunk and install Windows 8.1 on the 1st, will anything work? ;-) Thanks

    Read the article

< Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >