emacs info - Page 368 - Developer IT

Looking for way to log process terminations on OS X (Mac)

- by Stan Sieler

I'm looking for a way to log all process terminations on my Mac (OS X 10.6.8). (And see pid, timestamp, process name) I've implemented something similar for HP-UX, but it required a kernel-level driver and intercepting several variations of "exit()" (the normal one, and the one invoked on behalf of a process while it's aborting). Why do I want the info? I've been seeing messages in my system log file (dmesg) like: CODE SIGNING: cs_invalid_page(0x1000): p=91550[GoogleSoftwareUp] clearing CS_VALID CODE SIGNING: cs_invalid_page(0x1000): p=92088[GoogleSoftwareUp] clearing CS_VALID Although dmesg lacks timestamps, apps/Utilities/Console : Database : all : search for CS_VALID shows that the messages appears about once every 58 1/2 minutes. I suspect the number after "p=" is a process id (pid) ... but for a process that has long since terminated by the time I see the message. So, if there was a process termination log mechanism that recorded the pid, the time of termination, the reason for termination, and the process name (at time of termination), that would probably allow me to determine who's causing those errors to be logged! (No, I'm not running Chrome on my Mac, and "ps -ef | grep -i goog" gets no hits either ... I'm not consciously running any Google apps on the Mac) thanks, Stan [email protected]

Read the article

IPv6 Addresses causing Exchange Relay whitelists to fail

- by makerofthings7

Several of our new Exchange servers are failing to relay messages because it is communicating over IPv6 and not matching any receive connector I previously set up. I'm not sure how we are using IP6 since we only have a IPv4 network and we are routing across subnets. I discovered this by typing helo in from the source to the server that is confused by my IP6 address. I saw the IPv6 message and the custom message I gave this receive connector. (connectors with more permission have a different helo) 220 HUB01 client helo asdf 250 HUB01.nfp.com Hello [fe80::cd8:6087:7b1e:99d4%11] More info about my environment: I have two dedicated Exchange forests each with a distinct purpose. They have no trust and only communicate by SMTP. They both share the same DNS infrastructure via stub zones. What are my options? This is my guess, but I'm no IPv6 expert so I don't know which one is the best option Disable IPv6 Add the IPv6 address to the whitelist (isn't that IP dynamic?) Tell Exchange to use IPv4 instead Figure out why we are using IPv6 instead of IP4

Read the article

Mysql connections hanging in login state

- by Mark Rose

Read the article

No sound out of headphone port on laptop

- by Thanatos

I cannot get sound out of the headphone port on a laptop. Headphones are plugged in, and sound comes out of the internal speakers. Windows behaves normally (sound switches to headphones when headphones are inserted). It did work in Linux at one point, but something changed, we're just not sure what. Rebooting doesn't fix. This appears to occur whether or not PulseAudio is running. Things I've tried: Rebooting. No effect. Booting into Windows. It works properly, so probably not a hardware issue. All of alsamixer. My only controls are this: "Master" Volume bar & mutable, unmuted. Controls volume. "PCM" Volume bar only. 100%. "S/PDIF" Mutable only, currently muted, has no effect. "S/PDIF" Default PCM", Mutable only, currently unmuted, has no effect. Killing PulseAudio. No effect. (It also won't stay dead! Something appears to be restarting it, and I can't tell what, but it is annoying as fuck.) alsactl init 0, no effect. sudo rm -f /var/lib/alsa/asound.state, no effect. General system info: Ubuntu 10.04 LTS Toshiba Satellite T135D-S1324 lspci says I have: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller Some edits: Yes, the headphones are in all the way. This works in Windows: You plug headphones in, the internal speakers stop making noise, and noise comes out the head phones. Windows says I only have two sound cards: the HDMI port (which I don't care about) and the "sound card", which it claims is a "Conexant Pebble High Definition SmartAudio" In Windows, both the internal speakers and the headphone jack show up as one soundcard, which in my experience, is typical. (This is a laptop)

Read the article

dig show only answer

- by Zulakis

I want dig only to show the answer of my query. Normally, it prints out alot of additional info like this: ;; <<>> DiG 9.7.3 <<>> google.de ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 55839 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;google.de. IN A ;; ANSWER SECTION: google.de. 208 IN A 173.194.69.94 ;; Query time: 0 msec ;; SERVER: 213.133.99.99#53(213.133.99.99) ;; WHEN: Sun Sep 23 10:02:34 2012 ;; MSG SIZE rcvd: 43 I want this to be reduced to just the answer section. dig has alot of options, a good one i found was +noall +answer ; <<>> DiG 9.7.3 <<>> google.de +noall +answer ;; global options: +cmd google.de. 145 IN A 173.194.69.94 It leaves out most of the stuff, but still shows this options thing. Any ideas on how to remove it using dig options? I sure could cut it out using other tools, but a option with dig itself would be the cleanest and nicest.

Read the article

How do I get ftype & assoc to match Windows Explorer?

- by Gauthier

I changed the association to use upon launching a .py file, via Windows Explorer: Tools - Folders - File types. Then browse to .py. Change the association to Wordpad. Now when I type the name of a py file in the command line, Wordpad opens it. But assoc and ftype in the command line still return the following: C:\> assoc .py .py = Python.File C:\> ftype Python.File Python.File = "C:\Program\Python27\python.exe" "%1" %* How come the association is working, but assoc and ftype are not aware of it? I did restart the prompt. More info from my registry: HKEY_CLASSES_ROOT\.py = Python.File HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.py\Application = wordpad.exe HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.py\OpenWithProgids\Python.File = HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.py\(Standard) = Python.File More registry: HKEY_CLASSES_ROOT\Applications\python.exe\shell\open\command\(Standard) = "C:\Program\Python27\python.exe" "%1" %*` I suppose this is what is showing up in ftype Python.File. But it does not seem to get used. (I am doing this for testing, so I can eventually choose my default version of Python easily).

Read the article

Juniper router dropping pings to external interface

- by Alexander Garden

My organization has a Juniper SSG20-WLAN that routes our traffic to the outside world. We've been having intermittent problems with our internet connection so I wrote up a Python script to ping the internal interface of the router, the external interface, a couple of our internal servers, the ISP router our router talks to, their upstream provider, and Google and Yahoo for good measure. It does that about every minute. What I have found is that when our internet goes out, our Juniper router ceases responding to pings on the external interface. Everything past that is, of course, unreachable. The internal interface and our internal servers continue to echo back without interruption. None of the counters indicate dropped packets of any type. They all look normal. The logs complain about VIP servers being unavailable but otherwise nothing indicative of network issues. My questions are these: Does this exonerate our ISP? Or, contrawise, might a problem with the connection be causing the external interface to go down? Is there somewhere else in the SSG20, beside the system log and counters, that might help me track down info on the problem? UPDATE: Turned out that one of the switches between my monitoring box and the router was a router itself, and occasionally diverting from the gateway to itself. Kudos to those who made suggestions along those lines. Not really sure which answer to mark as accepted, as it was really stuff in the comments that turned out to be right. Thanks for the suggestions.

Read the article

"Can't find root filesystem / error mounting /dev/root" when booting to new kernel

- by salparadise

I am trying to upgrade my kernel from 2.6.18-274 to 2.6.39 for some wireless card drivers. When I boot into the new kernel I get the "Can't find root filesystem / error mounting /dev/root" googling led me to this page http://fedoraproject.org/wiki/Common_kernel_problems#Can.27t_find_root_filesystem_.2F_error_mounting_.2Fdev.2Froot From what I am reading seems to be an issue with a driver for my SATA controller or HD, but I can't find what option I need to add to the kernel. Doing a diff from the old initrd to the new one gives me the following: root-> diff /tmp/kafter /tmp/kbefore 6a7,8 > lib/dm-message.ko > lib/dm-region_hash.ko 8a11 > lib/dm-raid45.ko 13d15 < lib/dm-region-hash.ko 16a19 > lib/dm-mem-cache.ko Do I need any of those? not sure if I would need dm-raid45.ko as I am not running a raid. I have the same SATA and IDE options configured for both kernels so not sure what else to look for, any help is appreciated. Additionally here is the HW info: 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Hewlett-Packard Company Unknown device 3006 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 233 I/O ports at 1818 [size=8] I/O ports at 1830 [size=4] I/O ports at 1820 [size=8] I/O ports at 1834 [size=4] I/O ports at 14f0 [size=16] Capabilities: [70] Power Management version 2 root-> smartctl -a /dev/sda ... === START OF INFORMATION SECTION === Device Model: WDC WD5000AADS-00S9B0

Read the article

Looking for suggestions for hosting Windows 2000 Server in the cloud / VPS / etc?

- by JohnyD

I have a Windows 2000 Server, currently virtualized in Hyper-V, that I would like to get running off-site as a backup (cloud, VPS, etc). You can't virtualize in EC2 and I'm fairly certain there are no Server 2000 AMI's floating about (correct me if I'm wrong!). If anyone has a recommendation on how I can get a virtualized Windows 2000 Server running in a secure, remote environment I would be grateful. As far as locations go I'd be interested in both North America as well as Australia and Europe. In a nutshell, we're ploughing our way out of a legacy codebase and this server is the last that remains of the legacy apps. However, it is still very much used by our clients. Everything is backed up each night (data, images, etc) to tape which is then taken offsite. However, in the event of a fire I would love to have a backup legacy server to point DNS records to. So while I am rebuilding from the ashes our services would already be available. It would save a lot of time and make my managers all the more happy (and that's what it's all about, riighhtt? :D) Thank you all for your suggestions. Please let me know if I've left out any important information. Additional info: - the legacy codebase does not function properly in Server 2003

Read the article

Nginx configuration leads to endless redirect loop

- by brianthecoder

So I've looked at every sample configuration I could find and yet every time I try and view a page that requires ssl, I end up in an redirect loop. I'm running nginx/0.8.53 and passenger 3.0.2. Here's the ssl config server { listen 443 default ssl; server_name <redacted>.com www.<redacted>.com; root /home/app/<redacted>/public; passenger_enabled on; rails_env production; ssl_certificate /home/app/ssl/<redacted>.com.pem; ssl_certificate_key /home/app/ssl/<redacted>.key; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X_FORWARDED_PROTO https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-Url-Scheme $scheme; proxy_redirect off; proxy_max_temp_file_size 0; location /blog { rewrite ^/blog(/.*)?$ http://blog.<redacted>.com/$1 permanent; } location ~* \.(js|css|jpg|jpeg|gif|png)$ { if (-f $request_filename) { expires max; break; } } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } Here's the non-ssl config server { listen 80; server_name <redacted>.com www.<redacted>.com; root /home/app/<redacted>/public; passenger_enabled on; rails_env production; location /blog { rewrite ^/blog(/.*)?$ http://blog.<redacted>.com/$1 permanent; } location ~* \.(js|css|jpg|jpeg|gif|png)$ { if (-f $request_filename) { expires max; break; } } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } Let me know if there's any additional info I can give to help diagnose the issue.

Read the article

Nginx/puma rhel unix socket permission error?

- by Kevin Brown

When I try to start my puma server, I get the error: /.rvm/gems/ruby-2.1.1/gems/puma-2.9.0/lib/puma/binder.rb:275:in `initialize': Permission denied - connect(2) for "/var/run/nvhbase.sock" (Errno::EACCES) My sites-available/nvhbase.conf file: upstream nvhbase { server unix:/var/run/nvhbase.sock; } server { listen 80 default_server; server_name 207.131.132.219; root /home/vf032500/dev/nvh/public; location / { proxy_pass http://unix:/var/run/nvhbase.sock; proxy_http_version 1.1; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection $connection_upgrade; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-Proto https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_redirect off; } } I don't know a lot about unix sockets and everything works fine using tcp/puma default. My rails app is in my user directory. Is that the problem?? socket is starting in /var/run--I can start in /tmp, but I've heard that's bad practice? Provided I start the server in /tmp, I then can't access it via the server's ip--then what? I'm happy to provide any needed info, I just don't know a whole lot about server/nginx/puma.

Read the article

Wake on Lan Remote not waking PC while the PC does receive the packet.

- by Nycrea

Over the last couple of weeks, I have been trying to set up WOL from a remote location. When I use my laptop to wake the machine locally, it works just fine. (for some reason, when I try to wake from my phone with an app called "WOL wake on lan" it does not work locally either, but I'll get to that later) Anyway, when the machine is turned on, and I let it 'listen' for incoming magic packets (with a program called "WOL magic packet sender") on my specified port, it does receive them, though when turned off, the machine does not wake. When sending from phone, either locally or via 3G remotely, it does receive but does not wake as well. Because the machine does receive them when turned on and listening, but does not wake when turned off, I am convinced the cause of the problem is my receiving PC, rather than the router or the sender. Some extra info: The receiving machine is a PC running Windows 7 64bit. My router is the Netgear JWNR2000v2. I have the port I use forwarded to my PC's static IP in the router. If anyone could help, or just share your own story with the same problem, maybe we can work this out. Thanks a lot in advance.

Read the article

Multiple servers vs 1 big server performace

- by pistacchio

Hi to all! My team of developers has suggested a server structure for an upcoming project we are developing. Our structure is "logical", meaning that the various logical components of the application (it is a distributed one) relies on different servers. Some components are more critical than others and will be subjected to more load. Our proposal was to have 1 server per component but the hardware guys suggested to replace the various machines with a single, bigger one with virtual servers. They're gonna use Blade Servers. Now, I'm not an expert at all, but my question to the guys was: so if we need, for example, 3 2GHz CPU / 2GB RAM machines and you give me 1 machine with 3 2GHz CPUs and 6 GB of RAM it is the same? They told me it is. Is this accurate? What are the advantages or disadvantages of both the solutions? What are the generally accepted best practices? Could you point out some URL reference dealing with the problem? Thank you in advance! EDIT: Some more info. The (internet / intranet) application is already layered. We have some servers on the DMZ that will expose pages to the internet and the databases are on their own machines. What we want to split (and they want to join) are some webservers that mainly expose webservices. One is a DAL that communicates with the database layer, one is our Single Sign On / User Profile application that gets called once per page and one is a clone of what seen on the Internet to be used on our lan.

Read the article

Windows 7 ignores F6/F8 and will not boot

- by P.Brian.Mackey

I have a work PC with sophos safeguard encryption on it. Windows failed to start. When I bootup I receive an error saying a recent hardware or software change might be the cause. File: \Boot\BCD Status: 0xc0000098 Info: The windows boot configuration data file does not contain a valid OS entry. This began after the PC forced me to run a system recovery. My machine had powered down improperly (power outage?) and simply would not respond to my keyboard input to cancel the option to scan my system. After the scan "repaired" a boot file, my system crashed. Now it tells me I can insert my windows 7 disk and run recovery. I can't simply do this because of Safeguard. The system recovery can't see my encrypted drive. I tried hitting F2 to manually login to Safeguard and then selected the option to boot from media. The computer prompts me to hit any key to boot from disk...which I do, but once again it is not reading my keyboard input. I can't get F8/F6 to bypass startup files and get me to a command prompt like the old days. If I could get to a command prompt I might could recover the file windows jacked up from its backup location...though I may need to use the windows recovery disk UI to do this..??? In the past I've been able to slap in a PS/2 keyboard when the USB keyboards stop responding like this. I have no PS/2 keyboard available. Anyone have any idea how I can undo the damage windows system recovery has done with safeguard installed?

Read the article

Grub error 18, gparted not showing anything

- by Montecristo

Some week ago I started having some problems with my pc, sometimes it just freezed not allowing me to do anything. I had to turn it off and on and sometimes do it a couple of time even at startup. Now it does not start at all, grub is giving me error 18. I have found that a solution is to create a bootable partition in the first sector of the disk. gparted does not recognize any partition, the window in which there would be my partitions is empty. sudo fdisk -l does not output anything. If I type sudo mount /dev/sda and then tab tab to autocomplete these are the devices coming out: sda sda1 sda2 sda5. If I launch sudo mount -t ext3 /dev/sda1 disk I get the following error: mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so dmesg outputs [ 1831.974847] EXT3-fs: unable to read superblock Do you know how to solve this issue? I'm not completely sure this is a software problem, should I try with a new hard disk?

Read the article

How to know whether mongodb is running on 64 bit mode or 32 bit mode

- by Jim Thio

My programmer install mongodb. Then somehow it doesn't work. I run C:\mongod\bin>mongod mongod --help for help and startup options Sat Aug 11 22:57:50 Sat Aug 11 22:57:50 warning: 32-bit servers don't have journaling enabled by def ault. Please use --journal if you want durability. Sat Aug 11 22:57:50 Sat Aug 11 22:57:50 [initandlisten] MongoDB starting : pid=3800 port=27017 dbpat h=/data/db 32-bit host=haryantoi5 Sat Aug 11 22:57:50 [initandlisten] Sat Aug 11 22:57:50 [initandlisten] ** NOTE: when using MongoDB 32 bit, you are limited to about 2 gigabytes of data Sat Aug 11 22:57:50 [initandlisten] ** see http://blog.mongodb.org/post/13 7788967/32-bit-limitations Sat Aug 11 22:57:50 [initandlisten] ** with --journal, the limit is lower Sat Aug 11 22:57:50 [initandlisten] Sat Aug 11 22:57:50 [initandlisten] db version v2.0.7-rc1, pdfile version 4.5 Sat Aug 11 22:57:50 [initandlisten] git version: 9efe4cce272373b52b96de1309c1fbf 0c984305f Sat Aug 11 22:57:50 [initandlisten] build info: windows sys.getwindowsversion(ma jor=6, minor=0, build=6002, platform=2, service_pack='Service Pack 2') BOOST_LIB _VERSION=1_42 Sat Aug 11 22:57:50 [initandlisten] options: {} ************** Unclean shutdown detected. Please visit http://dochub.mongodb.org/core/repair for recovery instructions. ************* Sat Aug 11 22:57:50 [initandlisten] exception in initAndListen: 12596 old lock f ile, terminating Sat Aug 11 22:57:50 dbexit: Sat Aug 11 22:57:50 [initandlisten] shutdown: going to close listening sockets.. . Sat Aug 11 22:57:50 [initandlisten] shutdown: going to flush diaglog... Sat Aug 11 22:57:50 [initandlisten] shutdown: going to close sockets... Sat Aug 11 22:57:50 [initandlisten] shutdown: waiting for fs preallocator... Sat Aug 11 22:57:50 [initandlisten] shutdown: closing all files... Sat Aug 11 22:57:50 [initandlisten] closeAllFiles() finished Sat Aug 11 22:57:50 dbexit: really exiting now It seems that mongod is running on 32 bit. I have a 64 bit computer and I want to run mongodb in 64 bit enviroment. How do I do so?

Read the article

Server not accepting uploads

- by Tatu Ulmanen

I'm having a strange problem with my VPS: I can download files from it, I can use PuTTy to connect to it and all behaves normally. But sometimes, when I try to upload a file to the server or save a file via SFTP, the connection inexplicably fails. I am using jEdit to edit files remotely via SFTP. When it works, it works fine. When it doesn't, I get an error message: Cannot save: java.io.IOException: inputstream is closed Cannot save: java.io.IOException: 4: I can see that a temporary save file (#file.php#save#) is created on the server with a filesize of 0. So the connection works, but when it comes to sending the actual data, something fails. The same thing with WinSCP, but the error is different: Copying file fatally failed. Copying files to remote side failed. And I can always browse the server with PuTTy without a problem. I see nothing abnormal in any log files. Auth.log shows this when I try to save: sshd[32638]: Accepted password for - from - port 62272 ssh2 sshd[32638]: pam_unix(sshd:session): session opened for user - by (uid=0) sshd[32640]: subsystem request for sftp sshd[32638]: pam_unix(sshd:session): session closed for user - When I wait for a while (say, an hour), everything works fine again. It can't be a temporary ban, as I am still allowed to connect to the server, right? I know this may not be enough info to solve the problem, but I am grateful for any clues or bits of information that might help me. What are the possible causes for this kind of behaviour, what log files can I check for clues etc.. I'm running out of ideas!

Read the article

tomcat 'document base does not exist' error (but it does)

- by SpliFF

Gentoo / Tomcat 6 INFO: Starting Servlet Engine: Apache Tomcat/6.0.20 Sep 8, 2009 10:34:51 AM org.apache.catalina.core.StandardContext resourcesStart SEVERE: Error starting static Resources java.lang.IllegalArgumentException: Document base /www/rivervalley/site does not exist or is not a readable directory at org.apache.naming.resources.FileDirContext.setDocBase(Unknown Source) at org.apache.catalina.core.StandardContext.resourcesStart(Unknown Source) at org.apache.catalina.core.StandardContext.start(Unknown Source) at org.apache.catalina.core.ContainerBase.start(Unknown Source) at org.apache.catalina.core.StandardHost.start(Unknown Source) at org.apache.catalina.core.ContainerBase.start(Unknown Source) oh really? then how come: ls -la /www/rivervalley/site/ drwxr-xr-x 12 tomcat tomcat 4096 Sep 8 09:56 . drwxr-xr-x 16 tomcat tomcat 4096 Jun 29 16:22 .. -rwxr--r-- 1 tomcat tomcat 520 Jul 3 02:15 Application.cfm drwxr-xr-x 2 tomcat tomcat 4096 Sep 8 09:56 WEB-INF and ... tomcat 18916 1.0 5.5 1159188 167892 ? Ssl 10:37 0:11 /opt/sun-jdk-1.5.0.18/bin/java -Djava.util.loggin Hell, ANY account can read that directory so the claim is utter nonsense. What else can cause this? Here's my relevant server.xml section: <Host name="rivervalley" appBase="webapps" unpackWARs="false" autoDeploy="false" xmlValidation="false" xmlNamespaceAware="false"> <Context path="" docBase="/www/rivervalley/site" /> </Host>

Read the article

2 Printers 1 Queue

- by Shazburg

My issue: When an order is processed, the same document needs to be printed on two printers. My proposed solution: Create a single queue in CUPS with a backend script that spits the job out to the two real printers queues. My problem: Documentation. Maybe I'm looking at every ring around the bullseye, but I can't find anything that lays out the rules for writing a CUPS backend script. In the end, I have several questions: Is there already an option to do this in CUPS that I've missed? The line I use to add my queue is "lpadmin -p MultiPass -E -v multipass -P Generic PostScript Printer". But DeviceURI is bad unless I specify a directory like "-v multipass:/tmp". Why is this? For testing, my script does nothing but capture ARGV and write it out to a text file one line per argument. Problem is, I'm getting nothing. Logs show the job as successful, but I'm pretty sure my meager attempt at a backend isn't even being run. I've tried to keep this question brief, so please ask for more info as I'm sure I've left out the most important part in all this. Honestly, I'm just done chasing my own tail. Thank you for your time.

Read the article

Ubuntu xrandr rotate issue

- by user83544

I've just bought a second monitor for my PC which happens to be a pivot monitor. I've already read lots of forums related to my problem but haven't come across a solution - I have the same symptoms as dozens of posts but no matter whatever I try it just doesn't work. I've already changed the xorg.conf file and added in the device section just under Driver "nvidia" the following for my second monitor: Option "RandRRotation" "on" When I save and reboot I try to rotate my screen with the nvidia X server settings by choosing the second monitor and clicking either "left" or "right" for the rotation. It immediately exits the nvidia settings window and does nothing. I tried within the terminal by typing: xrandr -o right I get the following error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 154 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 14 Current serial number in output stream: 14 I actually manage to rotate it with Option "Rotate" "CCW" instead of "RandRRotation". The problem with this solution is that you get the second monitor in the right position, but any window you open on that screen is practically unchangeable. You can't change the size nor move it, making it useless for reading PDFs, which is the main reason why I bought this second screen to help me write my thesis. Any help is really appreciated. sudo lshw -c video hiram@hiram-linux:~$ sudo lshw -c video *-display description: VGA compatible controller product: nVidia Corporation vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f8000000-f9ffffff memory:d8000000-dfffffff memory:d4000000-d7ffffff ioport:dc00(size=12 memory:fbd80000-fbdfffff

Read the article

Create a PDF that defaults to flip on short edge when printed double-sided

- by user568458

We're creating a 2-page PDF brochure with a target audience who will print it on their regular office or home printers. If it is printed on a double-sided printer (common in offices), it'll come out correctly if set manually by the user to "Flip on short edge", but will come out with the second page upside down if default settings are used (flip on long edge). Our target audience aren't very tech-literate, and we've found that even within our own office network there is variation in the location of the 'Flip on short edge' setting - so it isn't realistic to give everyone who downloads the PDF instructions on how to change this setting or to expect everyone to find out how to change the setting off their own backs. So, when creating a PDF (ideally using Adobe InDesign or Acrobat, but if other software or hacking is needed that's fine...), is there a way to configure the PDF file itself so that when printed double-sided with default settings, it flips on the short edge? If possible, it'll be useful supplementary info to know how reliable any such methods are across different PDF readers (e.g. Adobe Reader, Acrobat, Mac Preview, inbuilt browser readers (e.g. chrome), FoxIt, etc). If questions about content creation like this aren't a great fit here, feel free to migrate it to the graphic design stackexchange site - this question seems to fall half way between the two sites

Read the article

Is there a faster way to change default apps associated with file types on OS X?

- by Lri

Is there anything more convenient than using RCDefaultApp or Magic Launch, or just repeatedly pressing the Change All buttons in Finder's information panels? I thought about writing a shell script that would modify the CFBundleDocumentTypes arrays in Info.plist files. But each app has multiple keys (sometimes an icon) that would need to be changed. lsregister can't be used to make specific modifications to the Launch Services database. $ `locate lsregister` -h lsregister: [OPTIONS] [ <path>... ] [ -apps <domain>[,domain]... ] [ -libs <domain>[,domain]... ] [ -all <domain>[,domain]... ] Paths are searched for applications to register with the Launch Service database. Valid domains are "system", "local", "network" and "user". Domains can also be specified using only the first letter. -kill Reset the Launch Services database before doing anything else -seed If database isn't seeded, scan default locations for applications and libraries to register -lint Print information about plist errors while registering bundles -convert Register apps found in older LS database files -lazy n Sleep for n seconds before registering/scanning -r Recursive directory scan, do not recurse into packages or invisible directories -R Recursive directory scan, descending into packages and invisible directories -f force-update registration even if mod date is unchanged -u unregister instead of register -v Display progress information -dump Display full database contents after registration -h Display this help

Read the article

Over gigabit connection, Teracopy does 31MB/s, but Windows 8 does it at ~109MB per second?

- by Gaurang

I got my brain-melting first taste of Gigabit networking today, between my 2011 MacMini and Windows 8 Pro desktop connected via Cat.5e to Linksys WRT320N(sporting dd-WRT). After making sure that the line speed on both systems showed 1Gbps, I proceeded to copying a 2.4GB MP4 from the Mini to the Win 8 desktop (SMB sharing). Although satisfied with the 30-34 MB/s that Teracopy was showing (that was a proper step-up for me from 10 MB/s), I still was curious about this massive difference in the advertised and real-world speed. 2 hours of Google had me believing that there were other factors that resulted in less speed, SMB being one. So just for the sake of doing it, I iPerf'd both the systems and guess what that showed - around 875mbps on both systems! I then stumbled upon this little piece of info after which I turned off Teracopy and copied the same file through Windows 8's regular copier. 109 MB/s. Molten brains :) What exactly is causing this? And can I enable such speeds via Teracopy? I really dig the extra features that Teracopy has, will surely miss them now :D

Read the article

CentOS 6.5 x64 + Ajendi +nginx + php-fpm + mysql setup unable to load the PHP page

- by Francis

I'm using Ajendi to setup a PHP web server, I can load the PHP info page, when I try to load the PHP copy from other server, I get a blank page with this log appear on access log, I have no clue what was wrong and troubleshoot further, please advice. x.x.x.x - - [28/May/2014:10:08:37 -0400] "GET /index.php HTTP/1.1" 200 31 "-" "Mozilla/5.0 (Windows NT 6.1; rv:29.0) Gecko/20100101 Firefox/29.0" 2.6.32-431.1.2.0.1.el6.x86_64 cat /etc/redhat-release CentOS release 6.5 (Final) The vhost config AUTOMATICALLY GENERATED - DO NO EDIT! server { listen *:80; server_name test.com www.test.com; access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; root /www; index index.html index.htm index.php; location ~ \.php$ { alias /www; fastcgi_index index.php; include fcgi.conf; fastcgi_pass unix:/var/run/php-fcgi-php-fcgi-0.sock; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } }

Read the article

Updated my WAMP Server and MySQL is eating up 580mB of memory

- by Jon

I updated my dev-box's WAMPSERVER, and along with updating PHP and Apache, MySQL updated to '5.6.12'. After doing that, I copied the data folder from my old (5.1.36) install to the new one and now MySQL takes up 580mB which is way too much, since I'm the only person using it (Locally) and there are only 20 or so databases on it, none of which have 'memory' tables. How can I get this down to a decent amount? My my.ini: # For advice on how to change settings please see # http://dev.mysql.com/doc/refman/5.6/en/server-configuration-defaults.html # *** DO NOT EDIT THIS FILE. It's a template which will be copied to the # *** default location during install, and will be replaced if you # *** upgrade to a newer version of MySQL. [mysqld] # Remove leading # and set to the amount of RAM for the most important data # cache in MySQL. Start at 70% of total RAM for dedicated server, else 10%. # innodb_buffer_pool_size = 128M # Remove leading # to turn on a very important data integrity option: logging # changes to the binary log between backups. # log_bin # These are commonly set, remove the # and set as required. # basedir = ..... # datadir = ..... # port = ..... # server_id = ..... # Remove leading # to set options mainly useful for reporting servers. # The server defaults are faster for transactions and fast SELECTs. # Adjust sizes as needed, experiment to find the optimal values. # join_buffer_size = 128M # sort_buffer_size = 2M # read_rnd_buffer_size = 2M sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES Database info: Storage Engine Data Size Index Size Total Size InnoDB 48.00 KB 0.00 B 48.00 KB MEMORY 0.00 B 0.00 B 0.00 B MyISAM 163.64 MB 122.49 MB 286.13 MB Total 163.69 MB 122.49 MB 286.18 MB

Search Results

Search found 12252 results on 491 pages for 'emacs info'.

Page 368/491 | < Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375 | Next Page >

- by Stan Sieler

- by makerofthings7

- by Mark Rose

- by Thanatos

- by Zulakis

- by Gauthier

- by Alexander Garden

- by salparadise

- by JohnyD

- by brianthecoder

- by Kevin Brown

- by Nycrea

- by pistacchio

- by P.Brian.Mackey

- by Montecristo

- by Jim Thio

- by Tatu Ulmanen

- by SpliFF

- by Shazburg

- by user83544

- by user568458

- by Lri

- by Gaurang

- by Francis

- by Jon

< Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375 | Next Page >