Search Results

Search found 24721 results on 989 pages for 'int tostring'.

Page 368/989 | < Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >

• c# error for index was outside the bounds of array

  - by iliailiaey

  i have written below code but i have the error:Index was outside the bounds of the array.i cant understand its reason.how can i correct the code for preventing the error?(in the code,i want to make an array byte of size 57600 from an array byte of size 38400) int q = 0; int nbytes = 57600; byte[] gh = new byte[38400]; byte[] byte8 = new byte[nbytes]; byte[] aa = { 0xf8, 0x07, 0XE0, 0X1F }; for (int y = 0; y < nbytes-3; y += 3) { if (q < 38400-3) { byte8[y] = (byte)(gh[q] & aa[1]); byte8[y + 1] = (byte)(((gh[q] & aa[1]) << 5) | ((gh[q + 1] & aa[2]) >> 3)); byte8[y + 2] = (byte)((gh[q + 1] & aa[3]) << 3); q += 2; } }

  Read the article

• [C++] Multiple inclusion in multiple files

  - by Amumu

  Hi everyone, I am making a small game. In BattleRecord.h: #ifndef _CHARACTER_H_ #define _CHARACTER_H_ #include "Character.h" #endif class BattleRecord { public: Character Attacker; Character Defender; Status status; int DamageDealt; int GoldEarned; int ExpGained; }; In Character.h: #ifndef _EQUIPMENT_H_ #define _EQUIPMENT_H_ #include "Equipment.h" #endif class BattleRecord; class Character { BattleRecord AttackEnemy(Character &Enemy); } In BattleRecord.h: #ifndef _CHARACTER_H_ #define _CHARACTEr_H_ #include "Character.h" #endif #ifndef _BATLE_RECORD_H_ #define _BATLE_RECORD_H_ #include "BattleRecord.h" #endif class GUI { public: //GUI Methods, and two of these: void ViewStats(Character &Player); void Report(BattleRecord Record) } The problem here is, my Character.h and BattleRecord.h need to include each other, and this definitely will cause multiple redefinition problem. Therefore, I used forward declaration in Character.h by adding: class BattleRecord; The problem is sovled. But then, the GUI.h needs BattleRecord.h again for reporting the battle, so I have to include BattleRecord.h into the GUI.h. I also have to include the Character.h in order to pass into the ViewStat function. I got error and stuck with this up to this piont.

  Read the article

• C/C++: feedback in analyzing a code example

  - by KaiserJohaan

  Hello, I have a piece of code from an assignment I am uncertain about. I feel confident that I know the answer, but I just want to double-check with the community incase there's something I forgot. The title is basically secure coding and the question is just to explain the results. int main() { unsigned int i = 1; unsigned int c = 1; while (i > 0) { i = i*2; c++; } printf("%d\n", c); return 0; } My reasoning is this: At first glance you could imagine the code would run forever, considering it's initialized to a positive value and ever increasing. This of course is wrong because eventually the value will grow so large it will cause an integer overflow. This in turn is not entirely true either, because eventally it will force the variable 'i' to be signed by making the last bit to 1 and therefore regarded as a negative number, therefore terminating the loop. So it is not writing to unallocated memory and therefore cause integer overflow, but rather violating the data type and therefore causing the loop to terminate. I am quite sure this is the reason, but I just want to double check. Any opinions?

  Read the article

• forward invocation, by hand vs magically?

  - by John Smith

  I have the following two class: //file FruitTree.h @interface FruitTree : NSObject { Fruit * f; Leaf * l; } @end //file FruitTree.m @implementation FruitTree //here I get the number of seeds from the object f @end //file Fruit @interface Fruit : NSObject { int seeds; } -(int) countfruitseeds; @end My question is at the point of how I request the number of seeds from f. I have two choices. Either: Since I know f I can explicitly call it, i.e. I implement the method -(int) countfruitseeds { return [f countfruitseeds]; } Or: I can just use forwardInvocation: - (NSMethodSignature *)methodSignatureForSelector:(SEL)selector { // does the delegate respond to this selector? if ([f respondsToSelector:selector]) return [f methodSignatureForSelector:selector]; else if ([l respondsToSelector:selector]) return [l methodSignatureForSelector:selector]; else return [super methodSignatureForSelector: selector]; } - (void)forwardInvocation:(NSInvocation *)invocation { [invocation invokeWithTarget:f]; } (Note this is only a toy example to ask my question. My real classes have lots of methods, which is why I am asking.) Which is the better/faster method?

  Read the article

• Database doesn't update using TransactionScope

  - by Dissonant

  I have a client trying to communicate with a WCF service in a transactional manner. The client passes some data to the service and the service adds the data to its database accordingly. For some reason, the new data the service submits to its database isn't being persisted. When I have a look at the table data in the Server Explorer no new rows are added... Relevant code snippets are below: Client static void Main() { MyServiceClient client = new MyServiceClient(); Console.WriteLine("Please enter your name:"); string name = Console.ReadLine(); Console.WriteLine("Please enter the amount:"); int amount = int.Parse(Console.ReadLine()); using (TransactionScope transaction = new TransactionScope(TransactionScopeOption.Required)) { client.SubmitData(amount, name); transaction.Complete(); } client.Close(); } Service Note: I'm using Entity Framework to persist objects to the database. [OperationBehavior(TransactionScopeRequired = true, TransactionAutoComplete = true)] public void SubmitData(int amount, string name) { DatabaseEntities db = new DatabaseEntities(); Payment payment = new Payment(); payment.Amount = amount; payment.Name = name; db.AddToPayment(payment); //add to Payment table db.SaveChanges(); db.Dispose(); } I'm guessing it has something to do with the TransactionScope being used in the client. I've tried all combinations of db.SaveChanges() and db.AcceptAllChanges() as well, but the new payment data just doesn't get added to the database!

  Read the article

• Tower of Hanoi, stop sliding

  - by ArtWorkAD

  Hi, I developed a solution for the Tower of Hanoi problem: public static void bewege(int h, char quelle, char ablage, char ziel) { if(h > 0){ bewege(h - 1, quelle, ziel, ablage); System.out.println("Move "+ h +" from " + quelle + " to " + ziel); bewege(h - 1, ablage, quelle, ziel); } } It works fine. Now i want to limit the number of slides and throw an exception if a certain limit is reached. I tried it with a counter but it does not work: class HanoiNK{ public static void main(String args[]){ Integer n = Integer.parseInt(args[0]); Integer k = Integer.parseInt(args[1]); try{ bewege(k, n, 'A', 'B', 'C'); }catch(Exception e){ System.out.println(e); } } public static void bewege(int c, int h, char quelle, char ablage, char ziel) throws Exception{ if(h > 0){ if(counter != 0){ bewege(c, h - 1, quelle, ziel, ablage); c--; System.out.println("Move "+ h +" from " + quelle + " to " + ziel); bewege(c, h - 1, ablage, quelle, ziel); c--; }else{ throw new Exception("stop sliding"); } } } } The exception is never thrown. Any ideas?

  Read the article

• smallest mysql type that accomodates single decimal

  - by donpal

  Database newbie here. I'm setting up a mysql table. One of the fields will accept a value in increment of a 0.5. e.g. 0.5, 1.0, 1.5, 2.0, .... 200.5, etc. I've tried int but it doesn't capture the decimals. `value` int(10), What would be the smallest type that can accommodate this value, considering it's only a single decimal. I also was considering that because the decimal will always be 0.5 if at all, I could store it in a separate boolean field? So I would have 2 fields instead. Is this a stupid or somewhat over complicated idea? I don't know if it really saves me any memory, and it might get slower now that I'm accessing 2 fields instead of 1 `value` int(10), `half` bool, //or something similar to boolean What are your suggestions guys? Is the first option better, and what's the smallest data type in that case that would get me the 0.5?

  Read the article

• NSCFString leak inVolving NSString

  - by Srilakshmi Manthena

  Hi, I am getting leak at NSString *firstNameStr = [NSString stringWithFormat:@"%s",firstNameString]; CODE: +(NSString *)getValueForProperty:(ABPropertyID)propertyId forContact:(NSString *)contactId { if (addressBook == nil) { addressBook = ABAddressBookCreate(); } ABRecordID contactIntId = [contactId intValue]; ABRecordRef person = ABAddressBookGetPersonWithRecordID(addressBook, contactIntId); CFStringRef firstName; char *firstNameString; firstName = ABRecordCopyValue(person, propertyId); // Paso a char* los datos para que se puedan escribir static char* fallback = ""; int fbLength = strlen(fallback); int firstNameLength = fbLength; bool firstNameFallback = true; if (firstName != NULL) { firstNameLength = (int) CFStringGetLength(firstName); firstNameFallback = false; } if (firstNameLength == 0) { firstNameLength = fbLength; firstNameFallback = true; } firstNameString = malloc(sizeof(char)*(firstNameLength+1)); if (firstNameFallback == true) { strcpy(firstNameString, fallback); } else { CFStringGetCString(firstName, firstNameString, 10*CFStringGetLength(firstName), kCFStringEncodingASCII); } if (firstName != NULL) { CFRelease(firstName); } NSString *firstNameStr = [NSString stringWithFormat:@"%s",firstNameString]; free(firstNameString); return firstNameStr; }

  Read the article

• Help ! How do I get the total number rows from my SQL Server paging procedure ?

  - by The_AlienCoder

  Ok I have a table in my SQL Server database that stores comments. My desire is to be able to page though the records using [Back],[Next], page numbers & [Last] buttons in my data list. I figured the most efficient way was to use a stored procedure that only returns a certain number of rows within a particular range. Here is what I came up with @PageIndex INT, @PageSize INT, @postid int AS SET NOCOUNT ON begin WITH tmp AS ( SELECT comments.*, ROW_NUMBER() OVER (ORDER BY dateposted ASC) AS Row FROM comments WHERE (comments.postid = @postid)) SELECT tmp.* FROM tmp WHERE Row between (@PageIndex - 1) * @PageSize + 1 and @PageIndex*@PageSize end RETURN Now everything works fine and I have been able implement [Next] and [Back] buttons in my data list pager. Now I need the total number of all comments (not in the current page) so that I can implement my page numbers and the[Last] button on my pager. In other words I want to return the total number of rows in my first select statement i.e WITH tmp AS ( SELECT comments.*, ROW_NUMBER() OVER (ORDER BY dateposted ASC) AS Row FROM comments WHERE (comments.postid = @postid)) set @TotalRows = @@rowcount @@rowcount doesn't work and raises an error. I also cant get count.* to work either. Is there another way to get the total amount of rows or is my approach doomed.

  Read the article

• problem with insert into mysql DB using PHP

  - by user504363

  Hi all I have strange problem that I have a PHP page used to insert data into Mysql DB. the problem is that when I execute the code, nothing added to db and no errors is appeared although I set display errors codes error_reporting(E_ALL); ini_set('display_errors', TRUE); ini_set('display_startup_errors', TRUE); any idea about this problem ! here is my used code for inserting function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "") { if (PHP_VERSION < 6) { $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue; } $theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue); switch ($theType) { case "text": $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL"; break; case "long": case "int": $theValue = ($theValue != "") ? intval($theValue) : "NULL"; break; case "double": $theValue = ($theValue != "") ? doubleval($theValue) : "NULL"; break; case "date": $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL"; break; case "defined": $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue; break; } return $theValue; } include("Connections/mzk_mdc.php"); $ext = 1; $website = "mzk"; $mzk_sql=sprintf("INSERT INTO downloads (image, `by`, `rapid_title`, title, `description`, category, div_id, topic_url, down_times, ext, `website`) VALUES (%s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s)", GetSQLValueString($topic_thumb_image, "text"), GetSQLValueString($topic_by, "text"), GetSQLValueString($topic_des, "text"), GetSQLValueString($topic_title, "text"), GetSQLValueString($forum_content, "text"), GetSQLValueString($topic_category, "text"),GetSQLValueString($topic_div, "text"),GetSQLValueString($forum_link, "text") ,GetSQLValueString($topic_down_times, "int"),GetSQLValueString($ext, "int"), GetSQLValueString($website, "text")); mysql_select_db($database_mdc, $mdc); $mzk_result = mysql_query($mzk_sql, $mdc) or die("can not do more"); mysql_close($mdc);

  Read the article

• Comparison operators not supported for type IList when Paging data in Linq to Sql

  - by Dan

  I can understand what the error is saying - it can't compare a list. Not a problem, other than the fact that I don't know how to not have it compare a list when I want to page through a model with a list as a property. My Model: Event : IEvent int Id string Title // Other stuff.. LazyList<EventDate> Dates // The "problem" property Method which pages the data (truncated): public JsonResult JsonEventList(int skip, int take) { var query = _eventService.GetEvents(); // Do some filtering, then page data.. query = query.Skip(skip).Take(take); return Json(query.ToArray()); } As I said, the above is truncated quite a bit, leaving only the main point of the function: filter, page and return JSON'd data. The exception occurs when I enumerate (.ToArray()). The Event object is really only used to list the common objects of all the event types (Meetings, Birthdays, etc - for example). It still implements IEvent like the other types, so I can't just remove the LazyList<EventDate> Dates' property unless I no longer implementIEvent` Anyway, is there a way to avoid this? I don't really want to compare a LazyList when I page, but I do not know how to resolve this issue. Thank you in advance! :)

  Read the article

• Python 3.3 Webserver restarting problems

  - by IPDGino

  I have made a simple webserver in python, and had some problems with it before as described here: Python (3.3) Webserver script with an interesting error In that question, the answer was to use a While True: loop so that any crashes or errors would be resolved instantly, because it would just start itself again. I've used this for a while, and still want to make the server restart itself every few minutes, but on Linux for some reason it won't work for me. On windows the code below works fine, but on linux it keeps saying Handler class up here ... ... class Server: def __init__(self): self.server_class = HTTPServer self.server_adress = ('MY IP GOES HERE, or localhost', 8080) global httpd httpd = self.server_class(self.server_adress, Handler) self.main() def main(self): if count > 1: global SERVER_UP_SINCE HOUR_CHECK = int(((count - 1) * RESTART_INTERVAL) / 60) SERVER_UPTIME = str(HOUR_CHECK) + " MINUTES" if HOUR_CHECK > 60: minutes = int(HOUR_CHECK % 60) hours = int(HOUR_CHECK // 60) SERVER_UPTIME = ("%s HOURS, %s MINUTES" % (str(hours), str(minutes))) SERVING_ON_ADDR = self.server_adress SERVER_UP_SINCE = str(SERVER_UP_SINCE) SERVER_RESTART_NUMBER = count - 1 print(""" SERVER INFO ------------------------------------- SERVER_UPTIME: %s SERVER_UP_SINCE: %s TOTAL_FILES_SERVED: %d SERVING_ON_ADDR: %s SERVER_RESTART_NUMBER: %s \n\nSERVER HAS RESTARTED """ % (SERVER_UPTIME, SERVER_UP_SINCE, TOTAL_FILES, SERVING_ON_ADDR, SERVER_RESTART_NUMBER)) else: print("SERVER_BOOT=1\nSERVER_ONLINE=TRUE\nRESTART_LOOP=TRUE\nSERVING_ON_ADDR:%s" % str(self.server_adress)) while True: try: httpd.serve_forever() except KeyboardInterrupt: print("Shutting down...") break httpd.shutdown() httpd.socket.close() raise(SystemExit) return def server_restart(): """If you want the restart timer to be longer, replace the number after the RESTART_INTERVAL variable""" global RESTART_INTERVAL RESTART_INTERVAL = 10 threading.Timer(RESTART_INTERVAL, server_restart).start() global count count = count + 1 instance = Server() if __name__ == "__main__": global SERVER_UP_SINCE SERVER_UP_SINCE = strftime("%d-%m-%Y %H:%M:%S", gmtime()) server_restart() Basically, I make a thread to restart it every 10 seconds (For testing purposes) and start the server. After ten seconds it will say File "/home/username/Desktop/Webserver/server.py", line 199, in __init__ httpd = self.server_class(self.server_adress, Handler) File "/usr/lib/python3.3/socketserver.py", line 430, in __init__ self.server_bind() File "/usr/lib/python3.3/http/server.py", line 135, in server_bind socketserver.TCPServer.server_bind(self) File "/usr/lib/python3.3/socketserver.py", line 441, in server_bind self.socket.bind(self.server_address) OSError: [Errno 98] Address already in use As you can see in the except KeyboardInterruption line, I tried everything to make the server stop, and the program stop, but it will NOT stop. But the thing I really want to know is how to make this server able to restart, without giving some wonky errors.

  Read the article

• C standard addressing simplification inconsistency

  - by Chris Lutz

  Section §6.5.3.2 "Address and indirection operators" ¶3 says (relevant section only): The unary & operator returns the address of its operand. ... If the operand is the result of a unary * operator, neither that operator nor the & operator is evaluated and the result is as if both were omitted, except that the constraints on the operators still apply and the result is not an lvalue. Similarly, if the operand is the result of a [] operator, neither the & operator nor the unary * that is implied by the [] is evaluated and the result is as if the & operator were removed and the [] operator were changed to a + operator. ... This means that this: int *i = NULL; printf("%p", (void *) (&*i) ); printf("%p", (void *) (&i[10]) ); Should be perfectly legal, printing the null pointer (probably 0) and the null pointer plus 10 (probably 10). The standard seems very clear that both of those cases are required to be optimized. However, it doesn't seem to require the following to be optimized: struct { int a; short b; } *s = 0; printf("%p", (void *) (&s->b) ); This seems awfully inconsistent. I can see no reason that the above code shouldn't print the null pointer plus sizeof(int) (possibly 4). Simplifying a &-> expression is going to be the same conceptually (IMHO) as &[], a simple address-plus-offset. It's even an offset that's going to be determinable at compile time, rather than potentially runtime with the [] operator. Is there anything in the rationale about why this is so seemingly inconsistent?

  Read the article

• How to Specify Columntype in fluent nHibernate?

  - by Bipul

  I have a class CaptionItem public class CaptionItem { public virtual int SystemId { get; set; } public virtual int Version { get; set; } protected internal virtual IDictionary<string, string> CaptionValues {get; private set;} } I am using following code for nHibernate mapping Id(x => x.SystemId); Version(x => x.Version); Cache.ReadWrite().IncludeAll(); HasMany(x => x.CaptionValues) .KeyColumn("CaptionItem_Id") .AsMap<string>(idx => idx.Column("CaptionSet_Name"), elem => elem.Column("Text")) .Not.LazyLoad() .Cascade.Delete() .Table("CaptionValue") .Cache.ReadWrite().IncludeAll(); So in database two tables get created. One CaptionValue and other CaptionItem. In CaptionItem table has three columns 1. CaptionItem_Id int 2. Text nvarchar(255) 3. CaptionSet_Name nvarchar(255) Now, my question is how can I make the columnt type of Text to nvarchar(max)? Thanks in advance.

  Read the article

• How can a link within a WebView load another layout using javascript?

  - by huffmaster

  So I have 2 layout files (main.xml, featured.xml) and both each have a single WebView. When the application starts "main.xml" loads a html file into it's WebView. In this html file I have a link that calls javascript that runs code in the Activity that loaded the html. Once back in this Activity code though I try running setContentView(R.layout.featured) but it just bombs out on me. If I debug it just dies without any real error and if I run it the application just Force closes. Am I going about this correctly or should I be doing something differently? final private int MAIN = 1; final private int FEATURED = 2; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); webview = (WebView) findViewById(R.id.wvMain); webview.getSettings().setJavaScriptEnabled(true); webview.getSettings().setSupportZoom(false); webview.addJavascriptInterface(new EHJavaScriptInterface(), "eh"); webview.loadUrl("file:///android_asset/default.html"); } final class EHJavaScriptInterface { EHJavaScriptInterface() { } public void loadLayout(final String lo) { int i = Integer.parseInt(lo.trim()); switch (i) { /****** THIS IS WHERE I'M BOMBING OUT *********/ case FEATURED: setContentView(R.layout.featured);break; case MAIN: setContentView(R.layout.main);break; } } }

  Read the article

• how to set the output image use com.android.camera.action.CROP

  - by adi.zean

  I have code to crop an image, like this : public void doCrop(){ Intent intent = new Intent("com.android.camera.action.CROP"); intent.setType("image/"); List<ResolveInfo> list = getPackageManager().queryIntentActivities(intent,0); int size = list.size(); if (size == 0 ){ Toast.makeText(this, "Cant find crop app").show(); return; } else{ intent.setData(selectImageUri); intent.putExtra("outputX", 300); intent.putExtra("outputY", 300); intent.putExtra("aspectX", 1); intent.putExtra("aspectY", 1); intent.putExtra("scale", true); intent.putExtra("return-data", true); if (size == 1) { Intent i = new Intent(intent); ResolveInfo res = list.get(0); i.setComponent(new ComponentName(res.activityInfo.packageName, res.activityInfo.name)); startActivityForResult(i, CROP_RESULT); } } } public void onActivityResult (int requestCode, int resultCode, Intent dara){ if (resultCode == RESULT_OK){ if (requestCode == CROP_RESULT){ Bundle extras = data.getExtras(); if (extras != null){ bmp = extras.getParcelable("data"); } File f = new File(selectImageUri.getPath()); if (f.exists()) f.delete(); Intent inten3 = new Intent(this, tabActivity.class); startActivity(inten3); } } } from what i have read, the code intent.putExtra("outputX", 300); intent.putExtra("outputY", 300); is use to set the resolution of crop result, but why i can't get the result image resolution higer than 300x300? when i set the intent.putExtra("outputX", 800); intent.putExtra("outputY", 800); the crop function has no result or crash, any idea for this situation? the log cat say "! ! ! FAILED BINDER TRANSACTION ! ! !

  Read the article

• Comparing lists in Standard ML

  - by user1050640

  I am extremely new to SML and we just got out first programming assignment for class and I need a little insight. The question is: write an ML function, called minus: int list * int list -> int list, that takes two non-decreasing integer lists and produces a non-decreasing integer list obtained by removing the elements from the first input list which are also found in the second input list. For example, minus( [1,1,1,2,2], [1,1,2,3] ) = [1,2] minus( [1,1,2,3],[1,1,1,2,2] ) = [3] Here is my attempt at answering the question. Can anyone tell me what I am doing incorrectly? I don't quite understand parsing lists. fun minus(xs,nil) = [] | minus(nil,ys) = [] | minus(x::xs,y::ys) = if x=y then minus(xs,ys) else x :: minus(x,ys); Here is a fix I just did, I think this is right now? fun minus(L1,nil) = L1 | minus(nil,L2) = [] | minus(L1,L2) = if hd(L1) > hd(L2) then minus(L1,tl(L2)) else if hd(L1) = hd(L2) then minus(tl(L1),tl(L2)) else hd(L1) :: minus(tl(L1), L2);

  Read the article

• Read files from directory to create a ZIP hadoop

  - by Félix

  I'm looking for hadoop examples, something more complex than the wordcount example. What I want to do It's read the files in a directory in hadoop and get a zip, so I have thought to collect al the files in the map class and create the zip file in the reduce class. Can anyone give me a link to a tutorial or example than can help me to built it? I don't want anyone to do this for me, i'm asking for a link with better examples than the wordaccount. This is what I have, maybe it's useful for someone public class Testing { private static class MapClass extends MapReduceBase implements Mapper<LongWritable, Text, Text, BytesWritable> { // reuse objects to save overhead of object creation Logger log = Logger.getLogger("log_file"); public void map(LongWritable key, Text value, OutputCollector<Text, BytesWritable> output, Reporter reporter) throws IOException { String line = ((Text) value).toString(); log.info("Doing something ... " + line); BytesWritable b = new BytesWritable(); b.set(value.toString().getBytes() , 0, value.toString().getBytes() .length); output.collect(value, b); } } private static class ReduceClass extends MapReduceBase implements Reducer<Text, BytesWritable, Text, BytesWritable> { Logger log = Logger.getLogger("log_file"); ByteArrayOutputStream bout; ZipOutputStream out; @Override public void configure(JobConf job) { super.configure(job); log.setLevel(Level.INFO); bout = new ByteArrayOutputStream(); out = new ZipOutputStream(bout); } public void reduce(Text key, Iterator<BytesWritable> values, OutputCollector<Text, BytesWritable> output, Reporter reporter) throws IOException { while (values.hasNext()) { byte[] data = values.next().getBytes(); ZipEntry entry = new ZipEntry("entry"); out.putNextEntry(entry); out.write(data); out.closeEntry(); } BytesWritable b = new BytesWritable(); b.set(bout.toByteArray(), 0, bout.size()); output.collect(key, b); } @Override public void close() throws IOException { // TODO Auto-generated method stub super.close(); out.close(); } } /** * Runs the demo. */ public static void main(String[] args) throws IOException { int mapTasks = 20; int reduceTasks = 1; JobConf conf = new JobConf(Prue.class); conf.setJobName("testing"); conf.setNumMapTasks(mapTasks); conf.setNumReduceTasks(reduceTasks); MultipleInputs.addInputPath(conf, new Path("/messages"), TextInputFormat.class, MapClass.class); conf.setOutputKeyClass(Text.class); conf.setOutputValueClass(BytesWritable.class); FileOutputFormat.setOutputPath(conf, new Path("/czip")); conf.setMapperClass(MapClass.class); conf.setCombinerClass(ReduceClass.class); conf.setReducerClass(ReduceClass.class); // Delete the output directory if it exists already JobClient.runJob(conf); } }

  Read the article

• Project Euler, Problem 10 java solution not working

  - by Dennis S

  Hi, I'm trying to find the sum of the prime numbers < 2'000'000. This is my solution in java but I can't seem get the correct answer. Please give some input on what could be wrong and general advice on the code is appreciated. Printing 'sum' gives: 1308111344, which is incorrect. /* The sum of the primes below 10 is 2 + 3 + 5 + 7 = 17. Find the sum of all the primes below two million. */ class Helper{ public void run(){ Integer sum = 0; for(int i = 2; i < 2000000; i++){ if(isPrime(i)) sum += i; } System.out.println(sum); } private boolean isPrime(int nr){ if(nr == 2) return true; else if(nr == 1) return false; if(nr % 2 == 0) return false; for(int i = 3; i < Math.sqrt(nr); i += 2){ if(nr % i == 0) return false; } return true; } } class Problem{ public static void main(String[] args){ Helper p = new Helper(); p.run(); } }

  Read the article

• Adding Data into tables iclueds Foreign Keys but Which New Row created Entity FrameWork ?

  - by programmerist

  Addding Data into kartlar Table (RehberID,KampanyaID,BrimID) is ok. But Which Kart'ID created? i need to learn Which Id created after Adding Data (RehberID,KampanyaID,BrimID) into Kartlar? public static List<Kartlar> SaveKartlar(int RehberID, int KampanyaID, int BrimID, string Notlar) { using (GenSatisModuleEntities genSatisCtx = new GenSatisModuleEntities()) { Kartlar kartlar = new Kartlar(); kartlar.RehberReference.EntityKey = new System.Data.EntityKey("GenSatisModuleEntities.Rehber", "ID", RehberID); kartlar.KampanyaReference.EntityKey = new System.Data.EntityKey("GenSatisModuleEntities.Kampanya", "ID", KampanyaID); kartlar.BirimReference.EntityKey = new System.Data.EntityKey("GenSatisModuleEntities.Birim", "ID", BrimID); kartlar.Notlar = Notlar; genSatisCtx.AddToKartlar(kartlar); genSatisCtx.SaveChanges(); List<Kartlar> kartAddedPatient; kartAddedPatient = (from k in genSatisCtx.Kartlar where k.RehberReference.EntityKey == RehberID && k.KampanyaReference.EntityKey == KampanyaID && k.BirimReference.EntityKey == BrimID select k) return kartAddedPatient ; } } How can i do that? i want to get data from Kartlar which data i added?

  Read the article

• Is there any appreciable difference between if and if-else?

  - by Drew

  Given the following code snippets, is there any appreciable difference? public boolean foo(int input) { if(input > 10) { doStuff(); return true; } if(input == 0) { doOtherStuff(); return true; } return false; } vs. public boolean foo(int input) { if(input > 10) { doStuff(); return true; } else if(input == 0) { doOtherStuff(); return true; } else { return false; } } Or would the single exit principle be better here with this piece of code... public boolean foo(int input) { boolean toBeReturned = false; if(input > 10) { doStuff(); toBeReturned = true; } else if(input == 0) { doOtherStuff(); toBeReturned = true; } return toBeReturned; } Is there any perceptible performance difference? Do you feel one is more or less maintainable/readable than the others?

  Read the article

• Go - Using a map for its set properties with user defined types

  - by Seth Hoenig

  I'm trying to use the built-in map type as a set for a type of my own (Point, in this case). The problem is, when I assign a Point to the map, and then later create a new, but equal point and use it as a key, the map behaves as though that key is not in the map. Is this not possible to do? // maptest.go package main import "fmt" func main() { set := make(map[*Point]bool) printSet(set) set[NewPoint(0, 0)] = true printSet(set) set[NewPoint(0, 2)] = true printSet(set) _, ok := set[NewPoint(3, 3)] // not in map if !ok { fmt.Print("correct error code for non existent element\n") } else { fmt.Print("incorrect error code for non existent element\n") } c, ok := set[NewPoint(0, 2)] // another one just like it already in map if ok { fmt.Print("correct error code for existent element\n") // should get this } else { fmt.Print("incorrect error code for existent element\n") // get this } fmt.Printf("c: %t\n", c) } func printSet(stuff map[*Point]bool) { fmt.Print("Set:\n") for k, v := range stuff { fmt.Printf("%s: %t\n", k, v) } } type Point struct { row int col int } func NewPoint(r, c int) *Point { return &Point{r, c} } func (p *Point) String() string { return fmt.Sprintf("{%d, %d}", p.row, p.col) } func (p *Point) Eq(o *Point) bool { return p.row == o.row && p.col == o.col }

  Read the article

• When and why can sprintf fail?

  - by Srekel

  I'm using swprintf to build a string into a buffer (using a loop among other things). const int MaxStringLengthPerCharacter = 10 + 1; wchar_t* pTmp = pBuffer; for ( size_t i = 0; i < nNumPlayers ; ++i) { const int nPlayerId = GetPlayer(i); const int nWritten = swprintf(pTmp, MaxStringLengthPerCharacter, TEXT("%d,"), nPlayerId); assert(nWritten >= 0 ); pTmp += nWritten; } *pTaskPlayers = '\0'; If during testing the assert never hits, can I be sure that it will never hit in live code? That is, do I need to check if nWritten < 0 and handle that, or can I safely assume that there won't be a problem? Under which circumstances can it return -1? The documentation more or less just states "If the function fails". In one place I've read that it will fail if it can't match the arguments (i.e. the formatting string to the varargs) but that doesn't worry me. I'm also not worried about buffer overrun in this case - I know the buffer is big enough.

  Read the article

• Android ListActivity with Bitmaps and Garbage Collection issue

  - by chis54

  I have a ListActivity and in it I set my list items with a class that extends SimpleCursorAdapter. I'm overriding bindView to set my Views. I have some TextViews and ImageViews. This is how I set my list items in my cursor adapter: String variableName = "drawable/q" + num + "_200px"; int imageResource = context.getResources().getIdentifier(variableName, "drawable", context.getPackageName()); if (imageResource != 0 ) { // The drawable exists Bitmap b = BitmapFactory.decodeResource(context.getResources(), imageResource); width = b.getWidth(); height = b.getHeight(); imageView.getLayoutParams().width = (int) (width); imageView.getLayoutParams().height = (int) (height); imageView.setImageResource(imageResource); } else { imageView.setImageResource(R.drawable.25trans_200px); } The problem I'm having is whenever I update my list with setListAdapter I get a large amount of garbage collection: D/dalvikvm(18637): GC_EXTERNAL_ALLOC freed 125K, 51% free 2710K/5447K, external 2022K/2137K, paused 75ms D/dalvikvm(18637): GC_EXTERNAL_ALLOC freed 30K, 51% free 2701K/5447K, external 2669K/2972K, paused 64ms D/dalvikvm(18637): GC_EXTERNAL_ALLOC freed 23K, 51% free 2713K/5447K, external 3479K/3579K, paused 53ms D/dalvikvm(18637): GC_EXTERNAL_ALLOC freed 22K, 51% free 2706K/5447K, external 3303K/3352K, paused 64ms D/dalvikvm(18637): GC_EXTERNAL_ALLOC freed 21K, 51% free 2722K/5447K, external 3569K/3685K, paused 102ms D/dalvikvm(18637): GC_EXTERNAL_ALLOC freed 23K, 50% free 2755K/5447K, external 3499K/3605K, paused 65ms D/dalvikvm(18637): GC_EXTERNAL_ALLOC freed 23K, 50% free 2771K/5447K, external 4213K/4488K, paused 53ms D/dalvikvm(18637): GC_EXTERNAL_ALLOC freed 18K, 49% free 2796K/5447K, external 5057K/5343K, paused 75ms D/dalvikvm(18637): GC_EXTERNAL_ALLOC freed 28K, 49% free 2803K/5447K, external 5944K/5976K, paused 53ms D/dalvikvm( 435): GC_EXPLICIT freed 6K, 54% free 2544K/5511K, external 1625K/2137K, paused 50ms D/dalvikvm( 165): GC_EXPLICIT freed 85K, 52% free 2946K/6087K, external 4838K/5980K, paused 111ms D/dalvikvm( 448): GC_EXPLICIT freed 1K, 54% free 2540K/5511K, external 1625K/2137K, paused 50ms D/dalvikvm( 294): GC_EXPLICIT freed 8K, 55% free 2598K/5703K, external 1625K/2137K, paused 64ms What can I do to avoid this? It's causing my UI to be sluggish and when I scroll, too.

  Read the article

• Clone existing structs with different alignment in Visual C++

  - by Crend King

  Is there a way to clone an existing struct with different member alignment in Visual C++? Here is the background: I use an 3rd-party library, which uses several structs. To fill up the structs, I pass the address of the struct instances to some functions. Unfortunately, the functions only returns unaligned buffer, so that data of some members are always wrong. /Zp is out of choice, since it breaks the other parts of the program. I know #pragma pack modifies the alignment of the following struct, but I would like to avoid copying the structs into my code, for the definitions in the library might change in the future. Sample code: test.h: struct am_aligned { BYTE data1[10]; ULONG data2; }; test.cpp: #include "test.h" // typedef alignment(1) struct am_aligned am_unaligned; int APIENTRY wWinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow) { char buffer[20] = {}; for (int i = 0; i < sizeof(unaligned_struct); i++) { buffer[i] = i; } am_aligned instance = *(am_aligned*) buffer; return 0; } Consider am_aligned is defined in the library header file. am_unaligned is my custom declaration, and only effective in test.cpp. The commented line does not work of course. instance.data2 is 0x0f0e0d0c, while 0x0d0c0b0a is desired. Thanks for help!

  Read the article

< Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >