Search Results

Search found 11784 results on 472 pages for 'move assignment'.

Page 368/472 | < Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >

• Delete ARP cache on Mac OS when moving from one Wifi network to the other

  - by Puneet

  I am facing wireless connectivity problems when I move from one Wifi network to the other. Here is how it happens: I am at my friends place. I connect to his Wifi. His Wifi router ip address is 192.168.0.1. Everything is fine I close my laptop, come back to my house, open my laptop and I connect to the Wifi Network at my place. Different ESSID, but the Wifi router address is the same 192.168.0.1. At this point I cant get to anything on the internet. To debug I try to see if I can ping the router (192.168.0.1), I cant. I get a no route to host. Meanwhile airport tells me Im connected to Wifi. I see the arp cache and I see a permanent entry for 192.168.0.1 ? (192.168.0.1) at 5c:d9:98:65:73:6c on en1 permanent [ethernet] This permanent bit looks problematic. I go ahead and delete the arp cache entry and all is fine with the world until I go back to my friends place where the same situation plays out. Now my question is, why the hell is this happening? If there is no way around it, can I run a script on Wifi connect/disconnect to clear out the arp cache? Im using Mac OS X $uname -a Darwin 10.8.0 Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386 i386

  Read the article

• File Sync Solution for Batch Processing (ETL)

  - by KenFar

  I'm looking for a slightly different kind of sync utility - not one designed to keep two directories identical, but rather one intended to keep files flowing from one host to another. The context is a data warehouse that currently has a custom-developed solution that moves 10,000 files a day, some of which are 1+ gbytes gzipped files, between linux servers via ssh. Files are produced by the extract process, then moved to the transform server where a transform daemon is waiting to pick them up. The same process happens between transform & load. Once the files are moved they are typically archived on the source for a week, and the downstream process likewise moves them to temp then archive as it consumes them. So, my requirements & desires: It is never used to refresh updated files - only used to deliver new files. Because it's delivering files to downstream processes - it needs to rename the file once done so that a partial file doesn't get picked up. In order to simplify recovery, it should keep a copy of the source files - but rename them or move them to another directory. If the transfer fails (network down, file system full, permissions, file locked, etc), then it should retry periodically - and never fail in a non-recoverable way, or a way that sends the file twice or never sends the file. Should be able to copy files to 2+ destinations. Should have a consolidated log so that it's easy to find problems Should have an optional checksum feature Any recommendations? Can Unison do this well?

  Read the article

• Can I recover a zpool after it's been exported, given that devices have not been reallocated?

  - by cali-spc

  I had a zpool we'll call 'testpool'. testpool had 3 devices included in it, and a single zfs called 'test'. I needed to move 'test' to a new, smaller pool. I wanted to name the new pool the same name 'testpool'. Basically did the following. zfs send testpool@backup > /tmp/test-dump zpool export -f testpool zpool create -f testpool newdevice zfs receive -F testpool < /tmp/test-dump Unfortunately I found out that the testpool@backup snapshot was the wrong snapshot. Too old. I have yet to reallocate the three devices that were in the OLD testpool. (None of these 3 devices are 'newdevice', they are a separate 3.) Is there any way I can recover data in those devices? I'm thinking since I named the new, smaller pool the same as the old zpool, I'm pretty much SOL. But if not, that would be nice to know. Edit: More info I did a 'zpool import' and got this. bash-3.00# zpool import pool: testpool id: 14781458723915654709 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: testpool ONLINE c5t8d0 ONLINE c5t9d0 ONLINE c5t10d0 ONLINE So I'm guessing I just need the syntax to import this zpool using its numeric identifier, while giving it a new name. S.

  Read the article

• Resize Win2003 system+boot partitions to bigger disks & different controller?

  - by ane

  Have an old Win2003 server with 1 SCSI hard drive partitioned as follows: D: boot (includes D:\ntldr, boot.ini, etc.) C: system (includes C:\WINDOWS) Want to move the whole system to new hardware with bigger drives and different controllers. Specifically, C: to a 300GB SAS drive, and D: to a 2TB SATA drive. Tried: VMWare Converter - VMWare Server - Diskpart Result: Diskpart refuses to resize system or boot disks VMWare Converter - VMWare Server - GParted Result: Will not boot (see http://serverfault.com/questions/219868/resize-ntfs-system-partitions-with-gparted ) Attach original VMWare disk to a duplicate VMWare install - Diskpart Result: Will not boot (goes to Directory Services Restore mode) Backup Exec System Recovery Server Edition 2010 with Restore Anywhere (tried restoring both to VMWare and to the bare system, without VMWare) Result: Windows Boot error: Could not read from the selected boot disk. Check boot path. Supposedly this is a boot.ini problem, so I try bootcfg /rebuild from the recovery console. Says it can't find windows partition so it can't rebuild. Thought about Ghost but it's completely different hardware/controllers that we're restoring to, so I doubt it would boot. Reinstalling Windows from scratch is not an option due to critical custom software heavily embedded on the original machine. Has anyone been in a similar situation (with unusual boot/system partitions) before and figured out how to resize onto different disks?

  Read the article

• Can you transfer a Windows 7 XP-mode VHD to a new PC without the need for reactivation?

  - by Henk

  Hi. At the moment I am running Vista 32 bit and use VPC 2007 a lot. I have several W2000 VMs set up with complex software configurations. For me, one of the advantages of working with VPCs is that a VM can easily be copied to another PC (like a notebook). Also, when I move to a new PC, I can immediately work with my existing VMs without the need to reinstall all applications. I am thinking about buying a new pc with Windows 7 64 bit pro, and using the xp-mode VM that comes with Windows 7. The advantages would be support for more memory (so being able to run more VM's simultaneously) and having a licenced XP VM. I would like to know if you can transfer a VHD that is based on the xp-mode VHD to another machine without Activation issues. The other machine will of course, also be running W7. I would guess that this would not be a problem. However, I did read about a guy who had to reinstall his W7 because of a harddisk failure, and could not access his xp-mode VHD anymore because it demanded re-activation. Thanks. Henk.

  Read the article

• Is there a program to show programs loading during the boot process in real time?

  - by Gary M. Mugford

  Hi all, There are any number of programs that will show me WHAT will run during the boot process for Windows XP. I've always been partial to Mike Lin's version but there are several others, some of which are quite possibly superior. That's not the issue. What I'd really like is a program that would load first and then would list the programs that were about to load and then check them off as the programs loaded. This isn't something I necessarily need for myself. But certain family members get click happy as soon as they see the icon they eventually want to run and end up clicking on it. THIRTY TWO TIMES in one memorable crash-inducing spasm. If there was some way for 'progress' to be shown during the loading of from the various spots Windows auto-loads from, PLUS a BIG BANNER saying "Please do not move the mouse or click on anything until done.", I think I might cut down on my early morning family support calls significantly. I've tried a variety of searches, but I couldn't find the ones that show in real time in the forest of links to programs that will show the list after the fact. Any leads? If not, do any of you who write the after-the-fact listers want to take a shot at producing a utility to do what I think would be a relatively popular utility? Best of the season to all of you and yours. Thanks in advance for any replies, GM

  Read the article

• freebsd-update failure

  - by ctuffli

  Some time ago, I upgrade my FreeBSD box to 7.1-RC2, but now I'd like to move to 7.2-RELEASE. I tried running # uname -mrsi FreeBSD 7.1-RC2 i386 GENERIC # freebsd-update upgrade -r 7.2-RELEASE Looking up update.FreeBSD.org mirrors... 3 mirrors found. Fetching metadata signature for 7.1-RC2 from update4.FreeBSD.org... failed. Fetching metadata signature for 7.1-RC2 from update5.FreeBSD.org... failed. Fetching metadata signature for 7.1-RC2 from update2.FreeBSD.org... failed. No mirrors remaining, giving up. Substituting 7.1 for 7.2 gives the same error. Adding a --debug option shows the failure as being fetch: http://update4.FreeBSD.org/7.1-RC2/i386/latest.ssl: Not Found Is there any way to still do a binary upgrade of this system as the 7.1-RC* directories don't exist on http://update.freebsd.org anymore? Upgrading from source is an option, but I wanted to see if there was some way to salvage this installation.

  Read the article

• Ubuntu 10.04 freezing and Ctrl + Alt + Backspace does nothing but music keeps playing

  - by Bryce Thomas

  I'm having intermittent problems where the screen will freeze in Ubuntu. I've tried using Ctrl + Alt + Backspace to restart the X-server, though this does nothing. When the freeze occurs, there's a small square of black dashes around the mouse pointer - maybe 1 inch in size. These dashes look a lot like a 2d barcode. The rest of the screen looks normal, but I can't move the mouse and none of the keyboard shortcuts work to do anything. However, music that I begin playing before the freeze continues to play, which seems to indicate it hasn't stalled up completely. I've noticed a similar freezing problem when I'm using Windows 7. That is, I see the same barcode like dashes around the mouse pointer when it freezes up. So I'm guessing it's either a driver or hardware problem. I thought if it was a hardware problem though, the whole computer might stop working (i.e. music would stop playing)? The video card I am using is an Nvidia, and I believe it's in the 7600 range. In Ubuntu I have the drivers for the card set to the latest available (proprietary). Ideally I'd like to be able to continue using the proprietary drivers. Is there any known issues with the drivers for this model graphics card, or has anyone experienced the same problem and knows how to fix it?

  Read the article

• Deleting certain files sits at "preparing to recycle" on Windows 7?

  - by Rachel

  We recently setup one of our users with a brand new Windows 7 computer, however she is unable to delete certain files. With some testing, I found I cannot move, rename, or view properties of these files either. When trying to delete the file, it just sits at the "Preparing to recycle" popup, however the "from" section says "Discovering items..." Clicking "More Details" on the popup shows me that it can't find the file name or where it's recycling from: Other notes... All the affected files are .pdf files that get created via a scanner. Other pdf files are fine. Opening the files works fine. I can open the file, Save As a new file, and delete the new one just fine Trying to delete the file via command prompt just sits there Rebooting the computer will let me manipulate the files like normal, however this user is responsible for scanning hundreds of documents a day and I'd rather not have to tell her to reboot her computer to delete files. The user is part of the administrator group on the computer The Owner of the affected files is the user attrib of files is just A

  Read the article

• Disk Partitioning problem with fdisk.

  - by MA1

  Currently i am using fdisk to create/resize windows partitions. Following is a sample input script to fdisk to create/resize windows partitions: fdisk /dev/sda < partInput the contents of partInput are as follows: d #delete the partition 3 #partition number to be deleted n #add a new partition p #primary: type of new partition 3 #new partition number 18804 #start cylinder of new partition 77433 #end cylinder of new partition t #change the type of partition 3 #partition number whose type(filesystem) is to be changed 7 #HPFS/NTFS: partition type(filesystem) n #add a new partition p #primary: type of partition 77434 #first cylinder of new partition 77825 #end cylinder new partition w #write all the above changes As you see in the above input we are using cylinders for start and end. Earlier i am using sectors as unit and everything is working fine but getting problems when partitioning a 1.5TB hard drive. Then i changed the unit to cylinders but it is working on some machines not all. On some machines fdisk failed to create the partition table correctly. So, i am thinking to move to parted if there is no way to do the above using fdisk. Please also tell me how to correctly convert sectors to cylinders? How to perform all the above steps using parted without losing the data OR how to use fdisk correctly?

  Read the article

• Random Excel bug when referencing a different sheet

  - by Matteo

  I am getting a very strange error anytime I try to use a formula pointing to a cell in a different sheet from the active one (even as simple as "=Sheet2!A1"). This started happening all of a sudden, and without any change in the system - only I seem to having started having the problem since I started using a workbook from another colleague with the same issue. I'm running Excel 2003 SP3 on XP. With little variants, whenever I reference a cell in a different sheet, from any formula, and then press Enter, the formula gets written on a different cell from the one I was editing it in, and throws a REF error. Example: I start editing in cell A1 of Sheet 1, type "=", then move the cursor to cell B2 of Sheet 2 (that may contain any value), and press Enter. At this stage you would expect cell A1 in Sheet 1 to contain formula "=Sheet2!B2" and display the value in that cell. Instead what happens is that the cell remains empty, and another random cell of Sheet 1 gets populated with something like "=Sheet2!#REF!" throwing an error. Interestingly, the error does not happen when I manually type the cell reference in (ie. without moving the cursor to the second sheet). Hope this is making any sense - any ideas are welcome! Thanks.

  Read the article

• SQL Server Offsite Backups

  - by Eric Maibach

  We have about !TB of SQL Server databases, and these databases generate about 200GB of data changes each day. Up to this point we have been doing Weekly full backups, daily diff backups, and hourly transaction log backups. The full and diff backups are backed up to tape and taken offsite each day. We have been trying to move away from tapes, and our IT department purchased a Barracuda Backup device that backups up data and then sends it offsite using our internet connection. I have been trying to get this to work for our SQL Server backups, and have ran into a number of problems. I normally like to just use SQL Server to perform backups instead of trying to use a agent, so that is what I tried first. However the Barracuda device was not able to dedup these files very well, so it ended up being to much data to try to send offsite and to archive. I then tried installing the Barracuda agent and using it to backup the SQL Server databases. However the problem I am having there is that on some of the database servers I also have files that need backed up, and I cannot find a way to create seperate backup schedules for the file backups and the SQL Server backups. Barracuda only does full or transaction log backups. So if I want to do hourly transaction log backups I end up doing a file system backup every hour (which is not good), or if I only schedule the backups to run once a night I either have to do a full backup every night, or only do a transaction backup once a day. None of these scenarios are good options. My question is, how is everyone else getting their large SQL Server database backups offsite. Are you just using tape, or have you found a offsite backup device that works well? Is anybody else using Barracuda to backup their SQL Server databases? If you do, then how do you have it setup?

  Read the article

• Screen Flickering: Hardware or Software?

  - by Wesley

  I have a Samsung N120 netbook (upgraded to 2GB DDR2 RAM) and there has been a screen flickering issue for some time now. However, I have not been able to accurately determine whether it is a software or hardware issue. Here are some of the symptoms: The flicker is white-colored and shows up as vertical lines. Flickering or not, there may be occasionally some random blue patterns (no image distortion) The screen tends to flicker more when the screen is not tilted back all the way. When tilting the screen back and forth, the screen will usually flicker. Some images on the screen may randomly distort without full-on flickering. The screen will flicker only on certain websites, but not on others. A certain part of a webpage may constantly be distorted randomly, even when scrolling. While flickering, the mouse will not move though I'm moving my finger along the touchpad. A connected external monitor does not have any problems. The flickering is completely random and does not seem to follow any CPU/GPU usage trends. Flickering usually gets worse when the screen brightness is turned higher. There will be flickering on battery and while plugged in. Search up "Samsung N120 - Screen Flickering" on YouTube for an idea of what the flickering looks like. However, there is no visible distortions and the flickering seems to stop when the screen has dimmed. Since the problems started, I tried formatting and using Windows 7, then formatted again and went back to Windows XP. The screen was also replaced sometime during this past summer. The uninstallation of the Samsung Battery Manager (on the original install of XP) seemed to reduce the flicker partially, but eventually got worse. So, what could possibly be the problem?

  Read the article

• Sometimes, Synaptics Touchpad Tends Cursor to Top-Right Corner

  - by John Chadwick

  This has been a reoccurring issue for me, pretty much since I've owned this laptop (an ASUS G60JX.) Sometimes, the cursor will stop working properly and instead tend toward the top right of the screen. Basically, sometime into my usage (maybe after a couple hours) the touchpad will inevitably begin to malfunction, where it has confusing patterns of pushing the mouse cursor toward the top right of the screen. In addition, certain features (like momentum) seem to quit working entirely. It makes using the cursor extremely difficult. I've been having this issue across very many drivers. Pretty much as soon as multitouch came into the mix, although I don't believe multitouch has anything to do with it. It appears that, in the state of malfunction, it doesn't matter how you touch the touchpad, but where you touch it. Certain regions do not seem to trigger the cursor to move to the top right corner. In fact, no specific region seems to, but some areas do so more often than others. The issue can be resolved temporarily by putting the computer into sleep mode and awakening it. I have found no way to recreate this success without sleeping the computer or rebooting. Disabling and re-enabling the touchpad device does not do anything to resolve the problem. This issue does not affect my WACOM tablet nor any USB mice, and can be resolved (not to my satisfactory) by uninstalling the touchpad drivers. I'm looking for a solution, or at least a workaround that doesn't require sleep mode.

  Read the article

• iptables rules to allow HTTP traffic to one domain only

  - by Emily

  Hi everyone, I need to configure my machine as to allow HTTP traffic to/from serverfault.com only. All other websites, services ports are not accessible. I came up with these iptables rules: #drop everything iptables -P INPUT DROP iptables -P OUTPUT DROP #Now, allow connection to website serverfault.com on port 80 iptables -A OUTPUT -p tcp -d serverfault.com --dport 80 -j ACCEPT iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT #allow loopback iptables -I INPUT 1 -i lo -j ACCEPT It doesn't work quite well: After I drop everything, and move on to rule 3: iptables -A OUTPUT -p tcp -d serverfault.com --dport 80 -j ACCEPT I get this error: iptables v1.4.4: host/network `serverfault.com' not found Try `iptables -h' or 'iptables --help' for more information. Do you think it is related to DNS? Should I allow it as well? Or should I just put IP addresses in the rules? Do you think what I'm trying to do could be achieved with simpler rules? How? I would appreciate any help or hints on this. Thanks a lot!

  Read the article

• Thunderbird does not delete messages from the POP server

  - by Max888

  Thunderbird does not delete messages from the POP server. I am a Yahoo Plus user and I can download messages from the inbox in Thunderbird from the Yahoo POP3 server. However, I want to delete read messages directly on the email client rather than go to Yahoo mail. When I do this, emails are still on the server In accounts setting, I have the following options ticked: -Automatically download new messages -Leave messages on server, Until I delete them Thanks for any guidance Update: Thanks for the replies so far. Some clarification: I do want to keep some messages on Yahoo for filling them in my online folders, hence the reason I do not download ALL my messages to Tbird and delete server message automatically **Update 2: Cracked it!! OK, boys and girls, here is the way to do it. Go to Options- Advanced - Config Editor find the Name 'mail . pop3 . deleteFromServerOnMove' Set it to True True: Delete the copy of the message on the POP3 server if you move or delete the message. False(default): Only delete the copy of the message on the POP3 server if you delete the message. That's it, restart Thunderbird. You need to press 'Get Mail' everytime you want to sync with the email server, in order for you to make sure messages in the application is in sync with the email server.**

  Read the article

• Sending email to google apps mailbox via exim4

  - by Andrey

  I have a hosting server with several users. One of the customers decided to move his email account to google apps and added the corresponding MX records so he can receive email now. But when it comes to sending email from my server to those email addresses, they don't make it. I guess it's because exim still thinks these domains are local. That's what i see in logs (example.com is my domain, example.net is the customer's domain): 2010-06-02 14:55:37 1OJmXp-0006yh-UG <= [email protected] U=root P=local S=342 T="lsdjf" from <[email protected]> for [email protected] 2010-06-02 14:55:38 1OJmXp-0006yh-UG ** [email protected] F=<[email protected]> R=virtual_aliases: 2010-06-02 14:55:38 1OJmXq-0006yl-2A <= <> R=1OJmXp-0006yh-UG U=mail P=local S=1113 T="Mail delivery failed: returning message to sender" from <> for [email protected] 2010-06-02 14:55:38 1OJmXp-0006yh-UG Completed 2010-06-02 14:55:38 1OJmXq-0006yl-2A User 0 set for local_delivery transport is on the never_users list 2010-06-02 14:55:38 1OJmXq-0006yl-2A == [email protected] R=localuser T=local_delivery defer (-29): User 0 set for local_delivery transport is on the never_users list 2010-06-02 14:55:38 1OJmXq-0006yl-2A ** [email protected]: retry timeout exceeded 2010-06-02 14:55:38 1OJmXq-0006yl-2A [email protected]: error ignored 2010-06-02 14:55:38 1OJmXq-0006yl-2A Completed What should i do to fix that?

  Read the article

• Disconnect from PHP after output generated

  - by Oli

  I have a LEMP stack. Nginx sitting in front of PHP-FPM. Because some of the sites are heavy and there's OPCode caching, PHP is set up so that there are only 5 child processes running. The aim being that each child can deal with any request in less than half-a-second and then move onto the next request. One problem I've found is that if it's a big chunk of HTML that's getting sent out, and the user has a slow connection, that PHP thread stays occupied until they've finished downloading. Because of my current setup, I have a pretty unforgiving timeout inside PHP where the script is killed after 20 seconds. This is to make sure everybody gets a turn but on a slow connection, this can mean the user gets cut off with a 504 Gateway timeout. I was wondering if there was some sort of buffer solution that I could implement within or just behind Nginx that sent the request through and then... well... buffered the content into its own cache and feed that onto the client as and when they could download it. The aim being that the underlying PHP thread can be freed up. What I'm asking for doesn't have to be PHP-specific. Anything that deals with FastCGI, or even any Nginx-upstream might have a similar issue to this.

  Read the article

• Rename Active Directory domain following Windows 2000 -> 2008 migration.

  - by ewwhite

  I'm working with a site that needs an internal DNS domain rename. It currently has a DNS name of domain.abc.com and NT name of ABC. I'm trying to get to a DNS name of abctrading.com and NT name of ABCTRADING. Split DNS would be used. The site originally ran from a single Windows 2000 domain controller hosting AD, file, print, DHCP and DNS services. There was no Exchange system in the environment. The 50 client PCs are all Windows XP with a handful of users using roaming profiles. All users are in a single OU and there are no group policy/GPOs. I'm a Linux engineer, but have been trying to guide another group of consultants to reach a more suitable setup. With the help of this group, we were able to move the single Windows 2000 system to a set of Windows 2008 R2 servers separated into domain controller and file/print systems (virtualized). We are also trying to add an Exchange 2010 system to this mix. The Windows 2000 server was demoted and is no longer in the picture. This is the tricky part, as client wants the domain renamed and the consultants aren't quite sure how to get through it without another 32-40 hours of testing/implementation. THey say that there's considerable risk to do the rename without a completely isolated test environment. However, this rename has to be done before installing Exchange. So we're stuck at this point. I'd like to know what's involved in renaming the domain at this point. We're on Windows Server 2008. The AD is healthy now. Coming from a Linux background, it seems as though there should be a reasonable path to this. Also, since the original domain appears to be a child/subdomain, would that be a problem here. I'd appreciate any guidance.

  Read the article

• Multiple Devices connecting to VPN on CentOS server

  - by jfreak53

  I am looking for a solution as to what would be the VPN software for multiple OSes and Devices. I currently have 15 systems to connect to a VPN. I was using Hamachi from LogMeIn but their lack of Android support really upsets me, and their limited support for Linux OSes is also a let down. 90% of my systems are Ubuntu 11+ systems, only 2 are Windows XP. But I also have a few people, maybe 3 that need to connect to it from Android devices. This is where Hamachi has let me down and I want to move to my own VPN solution. The server would be a simple VPS running CentOS. So I need some VPN software that allows connection of those to a Linux based server. I wanted to go with OpenVPN, but I am under the opinion that in any OS you have to have their software to connect to the VPN. Ubuntu supports VPN's out of the gate, but OpenVPN requires extra software to be installed, I don't want this if I can help it. Same with Windows and same with Android. Plus android mostly requires rooted devices for OpenVPN, at least from what I've read. I was looking at maybe L2TP, but I'm not sure how easy it is to get Ubu systems connected with it as I haven't found much on the subject, let alone Window's XP machines. I know Android connects out of the gate to it. I don't know much about L2TP but I know it's a pain to get running in CentOS from what I have read. Now the last option is some sort of software for PPTP but I've never read anything on it and don't know if all systems are compatible with it. What would be your solution to these devices and multiple OSes? OpenVPN seems to be my heading I just don't like it that it always requires software to run and rooted Android Devices. Any solutions for this and install solutions? Maybe a different OS for the server like Ubuntu would make another type of VPN easier?

  Read the article

• How To Replace Laptop HDD Without Losing Data?

  - by Ishan

  Hello, I recently went to Dell Service center and they tell that HDD is faulty and needs to be replaced. I have a Studio 1457 laptop with 500 GB HDD and don't want to lose the data(purchased in May 2010, still under warranty). I have searched a bit and I think it may be best to use a disk imaging software for this task. However, I don't know about a good software. I have following steps in mind: Get a 1 TB External HDD. Make an image of existing 500 GB HDD and store data on external disk. Install new HDD and install a brand new Windows copy and then install the software on it. Using the same software I used to make image, restore the old HDD image on new one. However, I have some questions in mind. First, is this possible? Second, I live in a country where piracy is a big issue and I am sure the support executive who will come to change HDD will have a pirated copy. But I have genuine Windows 7 Pro and don't want to lose it. Now, Dell does not supply and OS disks, so I can't install it on new HDD! If I follow above steps, which version of Windows 7 will be retained? One in the image(authentic) or one in the new HDD(pirated). I am ready to purchase a good software for this task and my budget is $50-60. Since laptop is under warranty, new HDD will be free. One last thing, I have created a Windows Migration file whose size is 70 GB. Can it be used to move from Windows 7 Pro to Windows 7 Pro?(In case I get a genuine copy of Windows 7!) Any other method to save all the data? Thanks in advance.

  Read the article

• CloudFront for dynamic content CDN

  - by Elad Lachmi

  I would like to use CF as a CDN for my entire site, including static and dynamic content. I have been using CF for static content for a while and I am very happy with the results. I am now doing POC of putting the web server completely behind CF. For the dynamic content I created a new distribution and set the origin to be my web server. Right now I'm looking to test the solution, so I have the web server on the original domain and the CF distribution on the amazon domain. This works with the exception of HTTPS urls and POST requests. For HTTPS requests, I see the requests are forwarded to the original site domain for now, but how will CF handle them when I move the distribution to the www cname? What configuration changes should I make so that CF forwards HTTPS requests to the origin? For POST requests, I want the post to be made to the origin server. Can I set this up in CF? Finally, the site has membership. Can I configure CF to pull all content from the origin if the user is logged in? Sorry for the long question. I'm a little lost and documentation for dynamic CF is still kind of scarce. Thank you!

  Read the article

• Debian, How to convert filesystem from ISO-8859-1 into UTF-8?

  - by Johan

  I have a old pc that is running Debian stable, that is in need of a upgrade. The problem is that it is using latin1 (ISO-8859-1) for everything, and since the rest of the world has moved to UTF-8 I plan to convert this computer as well. And for this question I will focus in on the files that are served with Samba, and some has some latin1 characters in the filenames (like åäö). Now my plan is to move all data of this old computer onto and a brand new one that is running Debian stable (but with UTF-8). Does anybody have a good idea? Thanks Johan Note: later I plan to use iconv to convert the content of some files with something like this: iconv --from-code=ISO-8859-1 --to-code=UTF-8 iso.txt > utf.txt However I don't know of a good way to convert the filesystem it self. Note: Normally I usaly just scp from one computer to the next, but then I end up with latin1 characters in the utf-8 filesystem... Update: Did a small test round with a hand full of files (with funny chars) in the filenames, and that seemed like it could work. convmv -r -f ISO-8859-1 -t UTF-8 * So it was only to execute with the --notest convmv -r -f ISO-8859-1 -t UTF-8 --notest * Nothing more to it.

  Read the article

• Build suggestion for mini itx server [on hold]

  - by Spyros

  I am looking to create a home server and since there does not seem to be a nice ready made one to purchase, i thought of building a mini itx one. I am not familiar with the best hardware/case to pick and therefore i thought i would ask for your experience. I will most probably install a simple linux distro, probably Debian and most probably without a desktop environment as well. Therefore, I am not looking for the best graphics card, though a decent one is preferred for sure. I would say that the most important thing is that the case/hardware play well with each other and the machine has decent specs ( i think something like 8gb RAM and 1TB hdd is most probably my most important things). I understand that this question can be closed as subjective, but it would be a great help for me if some of you guys who have been doing a similar build, can suggest something. I tried to find a stack exchange variant for the question, but it seems that this one more closely relates to the subject. But I will definitely understand it if people close it due to being subjective in nature. If you can maybe move it somewhere or so, please feel free to do so. Thank you for your time :)

  Read the article

• Can I use a Windows Server 2003 Domain Controller but my home router for DNS?

  - by NetworkingWannabie

  Hi All Probably easiest to start with a description of my current setup, which works (oh, and this is a home setup not an office or anything): I have an ADSL modem with a static IP address (192.168.128.1), and its DHCP capability is disabled. I have a permanently powered up Windows Server 2003 machine with a fixed IP (192.168.128.2) which provides my domain controller, dhcp, and dns. The default gateway for everything is my ADSL modem everything is setup to use the WS2003 machine as the primary DNS with the ADSL modem as Secondary DNS just in case the server goes down (everything includes the server itself). Lastly, just in case it's relevant, I have my DHCP leases set to infinite (or whatever the right term is). Everything is pretty hunky dory. Except, that is, for the fact that my server is ALWAYS on, and it isn't always used, so I'm burning juice that I don't need to - my server burns around 120W which isn't immense but isn't irrelevant either, so I'd like to put it into a stand-by state when it isn't being used (the more standby the better) and then get the clients to wake it up. Am I correct in assuming that this won't work at the moment - A given client would need an IP address to wake the machine up, and it needs to machine to be awake to get an IP - catch 22? Assuming I'm correct, can I move to using my router (which is always on) for DHCP? What impact will this have on DC and DNS? Alternatively, does anyone have a better way for me to achieve this? Can I get the server to wake up when it sees clients look for a DHCP server, etc? Wow, that came out longer than expected! Thanks for your help.

  Read the article

< Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >