Search Results

Search found 18132 results on 726 pages for 'connection timeout'.

Page 369/726 | < Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >

  • ODEE Green Field (Windows) Part 3 - SOA Suite

    - by AndyL-Oracle
     So you're still here, are you? I'm sure you're probably overjoyed at the prospect of continuing with our green field installation of ODEE. In my previous post, I covered the installation of WebLogic - you probably noticed, like I did, that it's a pretty quick install. I'm pretty certain this had everything to do with how quickly the next post made it to the internet! So let's dig in. Make sure you've followed the steps from the initial post to obtain the necessary software and prerequisites! Unpack the RCU (Repository Creation Utility). This ZIP file contains a directory (rcuHome) that should be extracted into your ORACLE_HOME. Run the RCU – execute rcuHome/bin/rcu.bat. Click Next. Select Create and click Next. Enter the database connection details and click Next – any failure to connection will show in the Messages box. Click Ok Expand and select the SOA Infrastructure item. This will automatically select additional required components. You can change the prefix used, but DEV is recommended. If you are creating a sandbox that includes additional components like WebCenter Content and UMS, you may select those schemas as well but they are not required for a basic ODEE installation. Click Next. Click OK. Specify the password for the schema(s). Then click Next. Click Next. Click OK. Click OK. Click Create. Click Close. Unpack the SOA Suite installation files into a single directory e.g. SOA. Run the installer – navigate and execute SOA/Disk1/setup.exe. If you receive a JDK error, switch to a command line to start the installer. To start the installer via command line, do Start?Run?cmd and cd into the SOA\Disk1 directory. Run setup.exe –jreLoc < pathtoJRE >. Ensure you do not use a path with spaces – use the ~1 notation as necessary (your directory must not exceed 8 characters so “Program Files” becomes “Progra~1” and “Program Files (x86)” becomes “Progra~2” in this notation). Click Next. Select Skip and click Next. Resolve any issues shown and click Next. Verify your oracle home locations. Defaults are recommended. Click Next. Select your application server. If you’ve already installed WebLogic, this should be automatically selected for you. Click Next. Click Install. Allow the installation to progress… Click Next. Click Finish. You can save the installation details if you want. That should keep you satisfied for the moment. Get ready, because the next posts are going to be meaty! 

    Read the article

  • What's wrong with my wireless?

    - by dazzle
    I am having issues with my wireless connection. My connection is constantly disconnecting, then attempting to reconnect, reconnecting momentarily, then disconnecting etc. on times scales that range from seconds to minutes. In the meantime, needless to say I'm having significant packet loss. I'm running Ubuntu 14.04 64bit, updated and upgraded to today. Here is my card and driver: delta@sager:~$ lspci -vq | grep -i wireless -B 1 -A 5 04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73) Subsystem: Intel Corporation Dual Band Wireless-AC 7260 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7d00000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: iwlwifi Here is my kernel: delta@sager:~$ uname -r 3.13.0-34-generic None of the other machines on my home network are having these issues. Windows Vista is networking without issue for goodness sake ;-) Here is a small clipping from the output of dmesg. As you can see, I am getting a cfg80211 message of some sort over and over again (FYI, I've replaced my MAC address with a series of dashes, so anytime there is a ---------------, that was where the MAC address was: [ 1881.739161] wlan1: authenticate with --------------- [ 1881.741561] wlan1: send auth to --------------- (try 1/3) [ 1881.743440] wlan1: authenticated [ 1881.746027] wlan1: associate with --------------- (try 1/3) [ 1881.749244] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1881.754727] wlan1: associated [ 1881.754827] cfg80211: Calling CRDA for country: US [ 1881.761552] cfg80211: Regulatory domain changed to country: US [ 1881.761559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1881.761564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1881.761568] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1881.761571] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761574] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761577] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761580] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1881.761584] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1882.391038] cfg80211: Calling CRDA to update world regulatory domain [ 1882.396254] cfg80211: World regulatory domain updated: [ 1882.396260] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1882.396265] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396268] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1882.396274] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396277] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.148252] wlan1: authenticate with --------------- [ 1886.150005] wlan1: send auth to --------------- (try 1/3) [ 1886.151807] wlan1: authenticated [ 1886.154847] wlan1: associate with --------------- (try 1/3) [ 1886.158147] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1886.163464] wlan1: associated [ 1886.163520] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by --------------- [ 1886.163588] cfg80211: Calling CRDA for country: US [ 1886.170500] cfg80211: Regulatory domain changed to country: US [ 1886.170508] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1886.170513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1886.170517] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1886.170520] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170523] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170526] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170529] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1886.170533] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1887.200197] cfg80211: Calling CRDA to update world regulatory domain [ 1887.203655] cfg80211: World regulatory domain updated: [ 1887.203659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1887.203662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203664] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203666] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1887.203668] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) I've poked around on AskUbuntu, and have not found any adequate solutions; have also found similar threads that were left unanswered. Any advice/experience/threads I might be able to pull on would be greatly appreciated. In your opinion, is this a kernel issue, hardware issue, etc.? Thanks in advance. EDIT: chili, here's the output of iwconfig: delta@sager:~$ iwconfig wlan1 IEEE 802.11abg ESSID:"LANbeforetime" Mode:Managed Frequency:2.412 GHz Access Point: ----------- Bit Rate=48 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=44/70 Signal level=-66 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:80 Missed beacon:0 eth0 no wireless extensions. lo no wireless extensions.

    Read the article

  • Starting over and new to Ubuntu

    - by 2funnyyone
    We have been having repeated problems with our interent service and using windows xp & sp3 (users and premissions) I see no need for them. I started with computers long before windows. Every since sp 3 come out in 2009 I have had nothing but problems. I have lost so many computers to virius and trojans, we just stack them up. We are with Qwest/ Century link which is using advertising servers which I think is causing the problem. All the computers are networked together which is not how I set them up. I beleive Century link is networking them through assignment of a domain for our home. This causes all the computers to crash twice. This is getting expensive. We tried buying new harddrives but reinfect with hours of connecting to internet. I also beleive the modem, router and all computers are infected. I put combofix on this one and that is the only reason we are still online with this laptop. I am afraid to install new equipment because my partner and I are on SSDI and this cost a lot. I go to school at UOP and had to run off a flash and reboot this laptop to recovery every other day or so, this pass month. New plan is: We are getting ready to install new equipment but afraid to reinfect again. Need help to install new equipment. The plan is to use current internet services from Qwest/ now Century Link. The list of New equipment in order: Century link wireless modem is ZyXEL PK5000Z with 4 direct connect Ethernet ports Next Dell Optiplex 210L ( used auction purchase ) 2 gb ram 80 g hard drive Ubuntu 11.10 operating system Next Wireless D-Link router WBR-1310 with 4 direct connect Ethernet ports OK-------- Purchased Dell OEM disk for Repair or Reinstalling Windows XP Professional Operating system (2 roommates as well) All infected computers are Dell desktops or laptops with XP Pro Also purchasing Ubuntu 12.04 for 3 computers. We like the way it runs but still learning it. Questions 1] How do we fdisk the infected computers without infecting new system. We have Dos disks, but none have floppy dish drive. We do have a new floppy disk drive and usb adapter we purchased from Amazon. 2] We are thinking Avast internet security because of the boot scan. We want all software loaded before reconnecting. We can manually load our internet provider information. We purchased StopZilla $100 for 5 computers, but not sure that is what we need. But need how to setup ports security and services we will need. Really lost at this part. So we are safe when we go back on the internet. 3] Want to connect reloaded fdisk systems to router as public connection and no sharing. Do not want to network all computers. 4] Want parental/ ownership control from Ubuntu system for internet connection (Children and friends). Do we restrict at the modem and/ or router? Any help would be a blessing. I do not want to go alone on this anymore.

    Read the article

  • What is a good design pattern / lib for iOS 5 to synchronize with a web service?

    - by Junto
    We are developing an iOS application that needs to synchronize with a remote server using web services. The existing web services have an "operations" style rather than REST (implemented in WCF but exposing JSON HTTP endpoints). We are unsure of how to structure the web services to best fit with iOS and would love some advice. We are also interested in how to manage the synchronization process within iOS. Without going into detailed specifics, the application allows the user to estimate repair costs at a remote site. These costs are broken down by room and item. If the user has an internet connection this data can be sent back to the server. Multiple photographs can be taken of each item, but they will be held in a separate queue, which sends when the connection is optimal (ideally wifi). Our backend application controls the unique ids for each room and item. Thus, each time we send these costs to the server, the server echoes the central database ids back, thus, that they can be synchronized in the mobile app. I have simplified this a little, since the operations contract is actually much larger, but I just want to illustrate the basic requirements without complicating matters. Firstly, the web service architecture: We currently have two operations: GetCosts and UpdateCosts. My assumption is that if we used a strict REST architecture we would need to break our single web service operations into multiple smaller services. This would make the services much more chatty and we would also have to guarantee a delivery order from the app. For example, we need to make sure that containing rooms are added before the item. Although this seems much more RESTful, our perception is that these extra calls are expensive connections (security checks, database calls, etc). Does the type of web api (operation over service focus) determine chunky vs chatty? Since this is mobile (3G), are we better handling lots of smaller messages, or a few large ones? Secondly, the iOS side. What is the current advice on how to manage data synchronization within the iOS (5) app itself. We need multiple queues and we need to guarantee delivery order in each queue (and technically, ordering between queues). The server needs to control unique ids and other properties and echo them back to the application. The application then needs to update an internal database and when re-updating, make sure the correct ids are available in the update message (essentially multiple inserts and updates in one call). Our backend has a ton of business logic operating on these cost estimates. We don't want any of this in the app itself. Currently the iOS app sends the cost data, and then the server echoes that data back with populated ids (and other data). The existing cost data is deleted and the echoed response data is added to the client database on the device. This is causing us problems, because any photos might not have been sent, but the original entity tree has been removed and replaced. Obviously updating the costs tree rather than replacing it would remove this problem, but I'm not sure if there are any nice xcode libraries out there to do such things. I welcome any advice you might have.

    Read the article

  • My shiny new gadget

    - by TechTwaddle
    About 3 months ago when I had tweeted (or twit?) that the HD7 could be my next phone I wasn’t a 100 percent sure, and when the HTC Mozart came out it was switch at first sight. I wanted to buy the Mozart mainly for three reasons; its unibody construction, smaller screen and the SLCD display. But now, holding a HD7 in my hand, I reminisce and think about how fate had its own plan. Too dramatic for a piece of gadget? Well, sort of, but seriously, this has been most exciting. So in short, I bought myself a HTC HD7 and am really loving it so far. Here are some pics (taken from my HD2 which now lies in a corner, crying),     Most of my day was spent setting up the device. Email accounts, Facebook, Marketplace etc. Since marketplace isn’t officially launched in India yet, my primary live id did not work. Whenever I tried launching marketplace it would say ‘marketplace is not currently supported in your country’. Searching the forums I found an easy work around. Just create a dummy live id with the country set to UK or US and log in to the device using this id. I was worried if the contacts and feeds from my primary live account would not be updated but that was not a problem. Adding another live account into the device does import your contacts, calendar and feeds from it. And that’s it, marketplace now works perfectly. I installed a few trial and free applications; haven’t checked if I can purchase apps though, will check that later and update this post. There is one issue I am still facing with the device, I can’t access the internet over GPRS. Windows Phone 7 only gives you the option to add an ‘APN’ and nothing else. Checking the connection settings on my HD2, I found out that there is also a proxy server I need to add to access GPRS, but so far I haven’t found a way to do that on WP7. Ideally HTC should have taken care of this, detect the operator and apply that operators settings on the device, but looks like that’s not happening. I also tried the ‘Connection Settings’ application that HTC bundled with the device, but it did nothing magical. If you’re reading this and know how to fix this problem please leave a comment. The next thing I did is install apps, a lot of apps. Read Engadget’s guide to essential apps for WP7. The apps and games I installed so far include Beezz (twitter app with push notifications), twitter (the official twitter app), Facebook, Youtube, NFS Undercover, Rocket Riot, Krashlander, Unite and the list goes on. All the apps run super smooth. The display looks fine indoors but I know it’s going to suck in bright sunlight. Anyhow, I am really impressed with what I’ve seen so far. I leave you with a few more photos. Have a great year ahead. Ciao!

    Read the article

  • Should I manage authentication on my own if the alternative is very low in usability and I am already managing roles?

    - by rumtscho
    As a small in-house dev department, we only have experience with developing applications for our intranet. We use the existing Active Directory for user account management. It contains the accounts of all company employees and many (but not all) of the business partners we have a cooperation with. Now, the top management wants a technology exchange application, and I am the lead dev on the new project. Basically, it is a database containing our know-how, with a web frontend. Our employees, our cooperating business partners, and people who wish to become our cooperating business partners should have access to it and see what technologies we have, so they can trade for them with the department which owns them. The technologies are not patented, but very valuable to competitors, so the department bosses are paranoid about somebody unauthorized gaining access to their technology description. This constraint necessitates a nightmarishly complicated multi-dimensional RBAC-hybrid model. As the Active Directory doesn't even contain all the information needed to infer the roles I use, I will have to manage roles plus per-technology per-user granted access exceptions within my system. The current plan is to use Active Directory for authentication. This will result in a multi-hour registration process for our business partners where the database owner has to manually create logins in our Active Directory and send them credentials. If I manage the logins in my own system, we could improve the usability a lot, for example by letting people have an active (but unprivileged) account as soon as they register. It seems to me that, after I am having a users table in the DB anyway (and managing ugly details like storing historical user IDs so that recycled user IDs within the Active Directory don't unexpectedly get rights to view someone's technologies), the additional complexity from implementing authentication functionality will be minimal. Therefore, I am starting to lean towards doing my own user login management and forgetting the AD altogether. On the other hand, I see some reasons to stay with Active Directory. First, the conventional wisdom I have heard from experienced programmers is to not do your own user management if you can avoid it. Second, we have code I can reuse for connection to the active directory, while I would have to code the authentication if done in-system (and my boss has clearly stated that getting the project delivered on time has much higher priority than delivering a system with high usability). Third, I am not a very experienced developer (this is my first lead position) and have never done user management before, so I am afraid that I am overlooking some important reasons to use the AD, or that I am underestimating the amount of work left to do my own authentication. I would like to know if there are more reasons to go with the AD authentication mechanism. Specifically, if I want to do my own authentication, what would I have to implement besides a secure connection for the login screen (which I would need anyway even if I am only transporting the pw to the AD), lookup of a password hash and a mechanism for password recovery (which will probably include manual identity verification, so no need for complex mTAN-like solutions)? And, if you have experience with such security-critical systems, which one would you use and why?

    Read the article

  • Hyper-V for Developers Part 1 Internal Networks

    Over the last year, weve been working with Microsoft to build training and demo content for the next version of Office Communications Server code-named Microsoft Communications Server 14.  This involved building multi-server demo environments in Hyper-V, getting them running on demo servers which we took to TechEd, PDC, and other training events, and sometimes connecting the demo servers to the show networks at those events.  ITPro stuff that should scare the hell out of a developer! It can get ugly when I occasionally have to venture into ITPro land.  Lets leave it at that. Having gone through this process about 10 to 15 times in the last year, I finally have it down.  This blog series is my attempt to put all that knowledge in one place if anything, so I can find it somewhere when I need it again.  Ill start with the most simple scenario and then build on top of it in future blog posts. If youre an ITPro, please resist the urge to laugh at how trivial this is. Internal Hyper-V Networks Lets start simple.  An internal network is one that intended only for the virtual machines that are going to be on that network it enables them to communicate with each other. Create an Internal Network On your host machine, fire up the Hyper-V Manager and click the Virtual Network Manager in the Actions panel. Select Internal and leave all the other default values. Give the virtual network a name, and leave all the other default values. After the virtual network is created, open the Network and Sharing Center and click Change Adapter Settings to see the list of network connections. The only thing I recommend that you do is to give this connection a friendly label, e.g. Hyper-V Internal.  When you have multiple networks and virtual networks on the host machines, this helps group the networks so you can easily differentiate them from each other.  Otherwise, dont touch it, only bad things can happen. Connect the Virtual Machines to the Internal Network Im assuming that you have more than 1 virtual machine already configured in Hyper-V, for example a Domain Controller, and Exchange Server, and a SharePoint Server. What you need to do is basically plug in the network to the virtual machine.  In order to do this, the machine needs to have a virtual network adapter.  If the VM doesnt have a network adapter, open the VMs Settings and click Add Hardware in the left pane.  Choose the virtual network to which to bind the adapter to. If you already have a virtual network adapter on the VM, simply connect it to the virtual network. Assign IP Addresses to the Virtual Machines on the Internal Network Open the Network and Sharing Center on your VM, there should only be 1 network at this time.  Open the Properties of the connection, select Internet Protocol Version 4 (TCP/IPv4) and hit Properties. In this environment, Im assigning IP addresses as 192.168.0.xxx.  This particular VM has an IP address of 192.168.0.40 with a subnet mask of 255.255.255.0, and a DNS Server of 192.168.0.18.  DNS is running on the Domain Controller VM which has an IP address of 192.168.0.18. Repeat this process on every VM in your environment, obviously assigning a unique IP address to each.  In an environment with a domain controller, you should now be able to ping the machines from each other. What Next? After completing this process, heres what you still cannot do: Access the internet from any of the VMs Remote desktop to a VM from the host Remote desktop to a VM over the network In the next post, well take a look configuring an External network adapter on the virtual machines.  Well then build on top of that so that you can RDP into the VMs from the host machine and over the network.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • When things go awry

    - by Phil Factor
    The moment the Entrepreneur opened his mouth on prime-time national TV, spelled out the URL and waxed big on how exciting ‘his’ new website was, I knew I was in for a busy night. I’d designed and built it. All at once, half a million people tried to log into the website. Although all my stress-testing paid off, I have to admit that the network locked up tight long before there was any danger of a database or website problem. Soon afterwards, the Entrepreneur and the Big Boss were there in the autopsy meeting. We picked through all our systems in detail to see how they’d borne the unexpected strain. Mercifully, in view of the sour mood of the Big Boss, it turned out that the only thing we could have done better was buy a bigger pipe to and from the internet. We’d specified that ‘big pipe’ when designing the system. The Big Boss had then railed at the cost and so we’d subsequently compromised. I felt that my design decisions were vindicated. The Big Boss brooded for a while. Then he made the significant comment: “What really ****** me off is the fact that, for ten minutes, we couldn’t take people’s money.” At that point I stopped feeling smug. Had the internet connection been better, the system would have reached its limit and failed rather precipitously, and that wasn’t what he wanted. Then it occurred to me that what had gummed up the connection was all those images on the site, that had made it so impressive for the visitors. If there had been a way to automatically pare down the site to the bare essentials under stress… Hmm. I began to consider disaster-recovery in the broadest sense – maintaining a service in spite of unusual or unexpected events. What he said makes a lot of sense: sacrifice whatever isn’t essential to keep the core service running when we approach the capacity limits. Maybe in IT we should borrow (or revive) the business concept of the ‘Skeleton service’, maintaining only the priority parts under stress, using a process that is well-prepared and carefully rehearsed. How might this work? Whatever the event we have to prepare for, it is all about understanding the priorities; knowing what one can dispense with when the going gets tough. In the event of database disaster, it’s much faster to deploy a skeletal system with only the essential data than to restore the entire system, though there would have to be a reconciliation process to update the revived database retrospectively, once the emergency was over. It isn’t just the database that could be designed for resilience. One could prepare for unusually high traffic in a website by designing a system that degraded gradually to a ‘skeletal’ site, one that maintained the commercial essentials without fat images, JavaScript libraries and razzmatazz. This is all what the Big Boss scathingly called ‘a mere technicality’. It seems to me that what is needed first is a culture of application and database design which acknowledges that we live in a very imperfect world, and react accordingly when things go awry.

    Read the article

  • cannot install firmware-b43-installer

    - by unknown
    output i get when installing the installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... Preconfiguring packages ... Selecting previously deselected package menu. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 216125 files and directories currently installed.) Unpacking menu (from .../menu_2.1.44ubuntu1_i386.deb) ... Selecting previously deselected package wifi-radar. Unpacking wifi-radar (from .../wifi-radar_2.0.s05-1.2_all.deb) ... Processing triggers for man-db ... Processing triggers for install-info ... Processing triggers for doc-base ... Processing 1 added doc-base file(s)... Registering documents with scrollkeeper... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for python-gmenu ... Rebuilding /usr/share/applications/desktop.en_US.UTF8.cache... Processing triggers for python-support ... Setting up firmware-b43-installer (4.150.10.5-5) ... --2012-10-26 08:51:30-- http://mirror2.openwrt.org/sources/broadcom-wl-4.150.10.5.tar.bz2 Resolving mirror2.openwrt.org... 46.4.11.11 Connecting to mirror2.openwrt.org|46.4.11.11|:80... failed: Connection refused. dpkg: error processing firmware-b43-installer (--configure): subprocess installed post-installation script returned error exit status 4 No apport report written because MaxReports is reached already Setting up menu (2.1.44ubuntu1) ... Processing triggers for menu ... Setting up wifi-radar (2.0.s05-1.2) ... Processing triggers for menu ... Errors were encountered while processing: firmware-b43-installer Setting up firmware-b43-installer (4.150.10.5-5) ... --2012-10-26 08:51:33-- http://mirror2.openwrt.org/sources/broadcom-wl-4.150.10.5.tar.bz2 Resolving mirror2.openwrt.org... 46.4.11.11 Connecting to mirror2.openwrt.org|46.4.11.11|:80... failed: Connection refused. dpkg: error processing firmware-b43-installer (--configure): subprocess installed post-installation script returned error exit status 4 same thing occurs when i try to install any of the wireless application. All other software installs and the same error when trying to install firmware. I tried to go the link(http://mirror2.openwrt.org/sources/broadcom-wl-4.150.10.5.tar.bz2) and download the package but found no make file found in his package. please help me.

    Read the article

  • Nashorn ?? JDBC ? Oracle DB ?????·?? 2

    - by Homma
    ???? Nashorn ?? JavaScript ??????? JDBC ? Oracle DB ?????????????????????????????????????JDBC ???????????????????????????????? ??????????????????????????? ????? URL ? https://blogs.oracle.com/nashorn_ja/entry/nashorn_jdbc_2 ??? ????????? JDBC ????? ??????????????? ${ORACLE_HOME}/jdbc/lib/ojdbc6.jar ??????????????????????????? JDBC ?????????????? ????? ojdbc6.jar ?????????????? ?????????????????????????????????????? var OracleDataSource = Java.type("oracle.jdbc.pool.OracleDataSource"); var ods = new OracleDataSource(); ods.setURL("jdbc:oracle:thin:test/test@dbsrv:1521:orcl"); var conn = ods.getConnection(); var meta = conn.getMetaData(); print("JDBC driver version is " + meta.getDriverVersion()); ???????? JDBC ?????? jjs ????? -cp ?????????????????????? $ jjs -cp ojdbc6.jar version.js JDBC driver version is 11.2.0.3.0 ????????????????????????????? JAR ????? Main Class ?????????????? ????JDBC ???????????????????????????????? ?????????java -jar ojdbc6.jar ?? JDBC ?????????????????? $ java -jar ojdbc6.jar Oracle 11.2.0.3.0 JDBC 4.0 compiled with JDK6 on Thu_Jul_11_15:43:23_PDT_2013 #Default Connection Properties Resource #Fri May 30 10:37:32 JST 2014 ????? JAR ???????????? Main-Class ???????????? main(String[]) ??????????????????? Nashorn ?????????????? JAR ????? Main-Class ???? ?? Main-Class ???????????? jar ????? JAR ?????????META-INF/MANIFEST.MF ???????????????? Main-Class ??????? $ jar xf ojdbc6.jar $ grep Main-Class META-INF/MANIFEST.MF Main-Class: oracle.jdbc.OracleDriver Main-Class ? oracle.jdbc.OracleDriver ????????????? Main-Class ??? ??????? oracle.jdbc.OracleDriver ???? main ????? Nashorn ???????? $ jjs -cp ojdbc6.jar jjs> var OracleDriver = Java.type("oracle.jdbc.OracleDriver"); jjs> var StringArray = Java.type("java.lang.String[]"); jjs> OracleDriver.main(new StringArray(0)) Oracle 11.2.0.3.0 JDBC 4.0 compiled with JDK6 on Thu_Jul_11_15:43:23_PDT_2013 #Default Connection Properties Resource #Fri May 30 10:55:22 JST 2014 null jjs> java ????? JAR ??????????????????????????? Java ???????????????? Java.type() ??????? JavaClass ????????????????????? ??? Nashorn ????????????? JDBC ? Oracle DB ????????JAR ????? Main-Class ???????????????? ??? Oracle DB ????? SQL ???????????????

    Read the article

  • .NET WebRequest.PreAuthenticate not quite what it sounds like

    - by Rick Strahl
    I’ve run into the  problem a few times now: How to pre-authenticate .NET WebRequest calls doing an HTTP call to the server – essentially send authentication credentials on the very first request instead of waiting for a server challenge first? At first glance this sound like it should be easy: The .NET WebRequest object has a PreAuthenticate property which sounds like it should force authentication credentials to be sent on the first request. Looking at the MSDN example certainly looks like it does: http://msdn.microsoft.com/en-us/library/system.net.webrequest.preauthenticate.aspx Unfortunately the MSDN sample is wrong. As is the text of the Help topic which incorrectly leads you to believe that PreAuthenticate… wait for it - pre-authenticates. But it doesn’t allow you to set credentials that are sent on the first request. What this property actually does is quite different. It doesn’t send credentials on the first request but rather caches the credentials ONCE you have already authenticated once. Http Authentication is based on a challenge response mechanism typically where the client sends a request and the server responds with a 401 header requesting authentication. So the client sends a request like this: GET /wconnect/admin/wc.wc?_maintain~ShowStatus HTTP/1.1 Host: rasnote User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en,de;q=0.7,en-us;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive and the server responds with: HTTP/1.1 401 Unauthorized Cache-Control: private Content-Type: text/html; charset=utf-8 Server: Microsoft-IIS/7.5 WWW-Authenticate: basic realm=rasnote" X-AspNet-Version: 2.0.50727 WWW-Authenticate: Negotiate WWW-Authenticate: NTLM WWW-Authenticate: Basic realm="rasnote" X-Powered-By: ASP.NET Date: Tue, 27 Oct 2009 00:58:20 GMT Content-Length: 5163 plus the actual error message body. The client then is responsible for re-sending the current request with the authentication token information provided (in this case Basic Auth): GET /wconnect/admin/wc.wc?_maintain~ShowStatus HTTP/1.1 Host: rasnote User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en,de;q=0.7,en-us;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cookie: TimeTrakker=2HJ1998WH06696; WebLogCommentUser=Rick Strahl|http://www.west-wind.com/|[email protected]; WebStoreUser=b8bd0ed9 Authorization: Basic cgsf12aDpkc2ZhZG1zMA== Once the authorization info is sent the server responds with the actual page result. Now if you use WebRequest (or WebClient) the default behavior is to re-authenticate on every request that requires authorization. This means if you look in  Fiddler or some other HTTP client Proxy that captures requests you’ll see that each request re-authenticates: Here are two requests fired back to back: and you can see the 401 challenge, the 200 response for both requests. If you watch this same conversation between a browser and a server you’ll notice that the first 401 is also there but the subsequent 401 requests are not present. WebRequest.PreAuthenticate And this is precisely what the WebRequest.PreAuthenticate property does: It’s a caching mechanism that caches the connection credentials for a given domain in the active process and resends it on subsequent requests. It does not send credentials on the first request but it will cache credentials on subsequent requests after authentication has succeeded: string url = "http://rasnote/wconnect/admin/wc.wc?_maintain~ShowStatus"; HttpWebRequest req = HttpWebRequest.Create(url) as HttpWebRequest; req.PreAuthenticate = true; req.Credentials = new NetworkCredential("rick", "secret", "rasnote"); req.AuthenticationLevel = System.Net.Security.AuthenticationLevel.MutualAuthRequested; req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; WebResponse resp = req.GetResponse(); resp.Close(); req = HttpWebRequest.Create(url) as HttpWebRequest; req.PreAuthenticate = true; req.Credentials = new NetworkCredential("rstrahl", "secret", "rasnote"); req.AuthenticationLevel = System.Net.Security.AuthenticationLevel.MutualAuthRequested; req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; resp = req.GetResponse(); which results in the desired sequence: where only the first request doesn’t send credentials. This is quite useful as it saves quite a few round trips to the server – bascially it saves one auth request request for every authenticated request you make. In most scenarios I think you’d want to send these credentials this way but one downside to this is that there’s no way to log out the client. Since the client always sends the credentials once authenticated only an explicit operation ON THE SERVER can undo the credentials by forcing another login explicitly (ie. re-challenging with a forced 401 request). Forcing Basic Authentication Credentials on the first Request On a few occasions I’ve needed to send credentials on a first request – mainly to some oddball third party Web Services (why you’d want to use Basic Auth on a Web Service is beyond me – don’t ask but it’s not uncommon in my experience). This is true of certain services that are using Basic Authentication (especially some Apache based Web Services) and REQUIRE that the authentication is sent right from the first request. No challenge first. Ugly but there it is. Now the following works only with Basic Authentication because it’s pretty straight forward to create the Basic Authorization ‘token’ in code since it’s just an unencrypted encoding of the user name and password into base64. As you might guess this is totally unsecure and should only be used when using HTTPS/SSL connections (i’m not in this example so I can capture the Fiddler trace and my local machine doesn’t have a cert installed, but for production apps ALWAYS use SSL with basic auth). The idea is that you simply add the required Authorization header to the request on your own along with the authorization string that encodes the username and password: string url = "http://rasnote/wconnect/admin/wc.wc?_maintain~ShowStatus"; HttpWebRequest req = HttpWebRequest.Create(url) as HttpWebRequest; string user = "rick"; string pwd = "secret"; string domain = "www.west-wind.com"; string auth = "Basic " + Convert.ToBase64String(System.Text.Encoding.Default.GetBytes(user + ":" + pwd)); req.PreAuthenticate = true; req.AuthenticationLevel = System.Net.Security.AuthenticationLevel.MutualAuthRequested;req.Headers.Add("Authorization", auth); req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; WebResponse resp = req.GetResponse(); resp.Close(); This works and causes the request to immediately send auth information to the server. However, this only works with Basic Auth because you can actually create the authentication credentials easily on the client because it’s essentially clear text. The same doesn’t work for Windows or Digest authentication since you can’t easily create the authentication token on the client and send it to the server. Another issue with this approach is that PreAuthenticate has no effect when you manually force the authentication. As far as Web Request is concerned it never sent the authentication information so it’s not actually caching the value any longer. If you run 3 requests in a row like this: string url = "http://rasnote/wconnect/admin/wc.wc?_maintain~ShowStatus"; HttpWebRequest req = HttpWebRequest.Create(url) as HttpWebRequest; string user = "ricks"; string pwd = "secret"; string domain = "www.west-wind.com"; string auth = "Basic " + Convert.ToBase64String(System.Text.Encoding.Default.GetBytes(user + ":" + pwd)); req.PreAuthenticate = true; req.Headers.Add("Authorization", auth); req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; WebResponse resp = req.GetResponse(); resp.Close(); req = HttpWebRequest.Create(url) as HttpWebRequest; req.PreAuthenticate = true; req.Credentials = new NetworkCredential(user, pwd, domain); req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; resp = req.GetResponse(); resp.Close(); req = HttpWebRequest.Create(url) as HttpWebRequest; req.PreAuthenticate = true; req.Credentials = new NetworkCredential(user, pwd, domain); req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; resp = req.GetResponse(); you’ll find the trace looking like this: where the first request (the one we explicitly add the header to) authenticates, the second challenges, and any subsequent ones then use the PreAuthenticate credential caching. In effect you’ll end up with one extra 401 request in this scenario, which is still better than 401 challenges on each request. Getting Access to WebRequest in Classic .NET Web Service Clients If you’re running a classic .NET Web Service client (non-WCF) one issue with the above is how do you get access to the WebRequest to actually add the custom headers to do the custom Authentication described above? One easy way is to implement a partial class that allows you add headers with something like this: public partial class TaxService { protected NameValueCollection Headers = new NameValueCollection(); public void AddHttpHeader(string key, string value) { this.Headers.Add(key,value); } public void ClearHttpHeaders() { this.Headers.Clear(); } protected override WebRequest GetWebRequest(Uri uri) { HttpWebRequest request = (HttpWebRequest) base.GetWebRequest(uri); request.Headers.Add(this.Headers); return request; } } where TaxService is the name of the .NET generated proxy class. In code you can then call AddHttpHeader() anywhere to add additional headers which are sent as part of the GetWebRequest override. Nice and simple once you know where to hook it. For WCF there’s a bit more work involved by creating a message extension as described here: http://weblogs.asp.net/avnerk/archive/2006/04/26/Adding-custom-headers-to-every-WCF-call-_2D00_-a-solution.aspx. FWIW, I think that HTTP header manipulation should be readily available on any HTTP based Web Service client DIRECTLY without having to subclass or implement a special interface hook. But alas a little extra work is required in .NET to make this happen Not a Common Problem, but when it happens… This has been one of those issues that is really rare, but it’s bitten me on several occasions when dealing with oddball Web services – a couple of times in my own work interacting with various Web Services and a few times on customer projects that required interaction with credentials-first services. Since the servers determine the protocol, we don’t have a choice but to follow the protocol. Lovely following standards that implementers decide to ignore, isn’t it? :-}© Rick Strahl, West Wind Technologies, 2005-2010Posted in .NET  CSharp  Web Services  

    Read the article

  • USB packets - receive wrong data

    - by regorianer
    i have a little python script which shows me the packets of an enocean device and does some events depending on the packet type. unfortunately it doesn't work because i'm getting wrong packets. Parts of the python script (used pySerial): Blockquote ser = serial.Serial('/dev/ttyUSB1',57600,bytesize = serial.EIGHTBITS,timeout = 1, parity = serial.PARITY_NONE , rtscts = 0) print 'clearing buffer' s = ser.read(10000) print 'start read' while 1: s = ser.read(1) for character in s: sys.stdout.write(" %s" % character.encode('hex')) print 'end' ser.close() output baudrate 57600: e0 e0 00 e0 00 e0 e0 e0 e0 e0 00 e0 e0 00 00 00 00 00 00 00 e0 e0 e0 00 00 00 00 e0 e0 e0 00 00 e0 e0 e0 e0 e0 00 e0 00 e0 e0 e0 e0 e0 00 e0 e0 00 00 00 00 00 00 e0 e0 e0 00 00 00 00 e0 e0 e0 00 00 e0 e0 e0 output baudrate 9600: a5 5a 0b 05 10 00 00 00 00 15 c4 56 20 6f a5 5a 0b 05 00 00 00 00 00 15 c4 56 20 5f linux terminal baudrate 57600: $stty -F /dev/ttyUSB1 57600 $stty < /dev/ttyUSB1 speed 57600 baud; line = 0; eof = ^A; min = 0; time = 0; -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke $while (true) do cat -A /dev/ttyUSB1 ; done myfile $hexdump -C myfile 00000000 4d 2d 60 4d 2d 60 5e 40 4d 2d 60 5e 40 4d 2d 60 |M-M-^@M-^@M-| 00000010 4d 2d 60 4d 2d 60 4d 2d 60 4d 2d 60 5e 40 4d 2d |M-M-M-M-^@M-| 00000020 60 4d 2d 60 5e 40 5e 40 5e 40 5e 40 5e 40 5e 40 |M-^@^@^@^@^@^@| 00000030 5e 40 4d 2d 60 4d 2d 60 4d 2d 60 5e 40 5e 40 5e |^@M-M-M-`^@^@^| 00000040 40 5e 40 4d 2d 60 4d 2d 60 4d 2d 60 |@^@M-M-M-`| 0000004c linux terminal baudrate 9600: $hexdump -C myfile2 00000000 5e 40 5e 55 4d 2d 44 56 30 4d 2d 3f 5e 40 5e 40 |^@^UM-DV0M-?^@^@| 00000010 5e 55 4d 2d 44 56 20 5f |^UM-DV _| 00000018 the specification says: 0x55 sync byte 1st 0xNNNN data length bytes (2 bytes) 0x07 opt length byte 0x01 type byte CRC, data, opt data und nochmal CRC but I'm not getting this packet structure. The output of the python script differs from the one I get via the terminal. I also wrote the python part with C, but the output is the same as with python As the USB receiver a BSC-BoR USB Receiver/Sender is used The EnOcean device is a simple button

    Read the article

  • How to configure LocalSessionFactoryBean to release connections after transaction end?

    - by peter
    I am testing an application (Spring 2.5, Hibernate 3.5.0 Beta, Atomikos 3.6.2, and Postgreql 8.4.2) with the configuration for the DAO listed below. The problem that I see is that the pool of 10 connections with the dataSource gets exhausted after the 10's transaction. I know 'hibernate.connection.release_mode' has no effect unless the session is obtained with openSession rather then using a contextual session. I am wandering if anyone has found a way to configure the LocalSessionFactoryBean to release connections after any transaction. Thank you Peter <bean id="dataSource" class="com.atomikos.jdbc.AtomikosDataSourceBean" init-method="init" destroy-method="close"> <property name="uniqueResourceName"><value>XADBMS</value></property> <property name="xaDataSourceClassName"> <value>org.postgresql.xa.PGXADataSource</value> </property> <property name="xaProperties"> <props> <prop key="databaseName">${jdbc.name}</prop> <prop key="serverName">${jdbc.server}</prop> <prop key="portNumber">${jdbc.port}</prop> <prop key="user">${jdbc.username}</prop> <prop key="password">${jdbc.password}</prop> </props> </property> <property name="poolSize"><value>10</value></property> </bean> <bean id="sessionFactory" class="org.springframework.orm.hibernate3.LocalSessionFactoryBean"> <property name="dataSource"> <ref bean="dataSource" /> </property> <property name="mappingResources"> <list> <value>Abc.hbm.xml</value> </list> </property> <property name="hibernateProperties"> <props> <prop key="hibernate.dialect">org.hibernate.dialect.PostgreSQLDialect</prop> <prop key="hibernate.show_sql">on</prop> <prop key="hibernate.format_sql">true</prop> <prop key="hibernate.connection.isolation">3</prop> <prop key="hibernate.current_session_context_class">jta</prop> <prop key="hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</prop> <prop key="hibernate.transaction.manager_lookup_class">com.atomikos.icatch.jta.hibernate3.TransactionManagerLookup</prop> <prop key="hibernate.connection.release_mode">auto</prop> <prop key="hibernate.transaction.auto_close_session">true</prop> </props> </property> </bean> <!-- Transaction definition here --> <bean id="userTransactionService" class="com.atomikos.icatch.config.UserTransactionServiceImp" init-method="init" destroy-method="shutdownForce"> <constructor-arg> <props> <prop key="com.atomikos.icatch.service"> com.atomikos.icatch.standalone.UserTransactionServiceFactory </prop> </props> </constructor-arg> </bean> <!-- Construct Atomikos UserTransactionManager, needed to configure Spring --> <bean id="AtomikosTransactionManager" class="com.atomikos.icatch.jta.UserTransactionManager" init-method="init" destroy-method="close" depends-on="userTransactionService"> <property name="forceShutdown" value="false" /> </bean> <!-- Also use Atomikos UserTransactionImp, needed to configure Spring --> <bean id="AtomikosUserTransaction" class="com.atomikos.icatch.jta.UserTransactionImp" depends-on="userTransactionService"> <property name="transactionTimeout" value="300" /> </bean> <!-- Configure the Spring framework to use JTA transactions from Atomikos --> <bean id="txManager" class="org.springframework.transaction.jta.JtaTransactionManager" depends-on="userTransactionService"> <property name="transactionManager" ref="AtomikosTransactionManager" /> <property name="userTransaction" ref="AtomikosUserTransaction" /> </bean> <!-- the transactional advice (what 'happens'; see the <aop:advisor/> bean below) --> <tx:advice id="txAdvice" transaction-manager="txManager"> <tx:attributes> <!-- all methods starting with 'get' are read-only --> <tx:method name="get*" read-only="true" propagation="REQUIRED"/> <!-- other methods use the default transaction settings (see below) --> <tx:method name="*" propagation="REQUIRED"/> </tx:attributes> </tx:advice> <aop:config> <aop:advisor pointcut="execution(* *.*.AbcDao.*(..))" advice-ref="txAdvice"/> </aop:config> <!-- DAO objects --> <bean id="abcDao" class="test.dao.impl.HibernateAbcDao" scope="singleton"> <property name="sessionFactory" ref="sessionFactory"/> </bean>

    Read the article

  • Another "Windows 7 entry missing from Grub2" Question

    - by 4x10
    Like many before me had the following problem that after installing Ubuntu (with windows 7 already installed), the grub boot loader wouldnt show windows 7 as a boot option, though i can boot fine if I use the "Choose Boot Device" options on the x220. The difference is that I try using UEFI only so many answers didn't really fit my problem, though i tried several stuffs: after running boot repair it destroyed the ubuntu boot loader custom entry in /etc/grub.d/40_custom for windows which doesnt show up many update-grub and reboots trying windows repair recovery thing while being there i also did bootrec.exe /FixBoot and update-grub and reboot again and finaly because it was so much fun, i installed linux all over again, while formatting and deleting everything linux related before that. Now that i think of it, Ubuntu also didn't notice Windows being there during the Setup and it still doesnt according to the Boot Info from Boot Repair. Boot Info Script 0.61-git-patched [23 April 2012] ============================= Boot Info Summary: =============================== => No boot loader is installed in the MBR of /dev/sda. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Windows 7: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /efi/Boot/bootx64.efi /efi/ubuntu/grubx64.efi sda2: __________________________________________________________________________ File system: Boot sector type: - Boot sector info: Mounting failed: mount: unknown filesystem type '' sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /Windows/System32/winload.exe sda4: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu precise (development branch) Boot files: /boot/grub/grub.cfg /etc/fstab sda5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sda6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 1 625,142,447 625,142,447 ee GPT GUID Partition Table detected. Partition Start Sector End Sector # of Sectors System /dev/sda1 2,048 206,847 204,800 EFI System partition /dev/sda2 206,848 468,991 262,144 Microsoft Reserved Partition (Windows) /dev/sda3 468,992 170,338,303 169,869,312 Data partition (Windows/Linux) /dev/sda4 170,338,304 330,338,304 160,000,001 Data partition (Windows/Linux) /dev/sda5 330,338,305 617,141,039 286,802,735 Data partition (Windows/Linux) /dev/sda6 617,141,040 625,141,040 8,000,001 Swap partition (Linux) "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 885C-ED1B vfat /dev/sda3 EE06CC0506CBCCB1 ntfs /dev/sda4 604dd3b2-64ca-4200-b8fb-820e8d0ca899 ext4 /dev/sda5 d62515fd-8120-4a74-b17b-0bdf244124a3 ext4 /dev/sda6 7078b649-fb2a-4c59-bd03-fd31ef440d37 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda1 /boot/efi vfat (rw) /dev/sda4 / ext4 (rw,errors=remount-ro) /dev/sda5 /home ext4 (rw) =========================== sda4/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod efi_gop insmod efi_uga insmod video_bochs insmod video_cirrus } insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux /boot/vmlinuz-3.2.0-20-generic root=UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-20-generic } menuentry 'Ubuntu, with Linux 3.2.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 echo 'Loading Linux 3.2.0-20-generic ...' linux /boot/vmlinuz-3.2.0-20-generic root=UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-20-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda4/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda4 during installation UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 / ext4 errors=remount-ro 0 1 # /boot/efi was on /dev/sda1 during installation UUID=885C-ED1B /boot/efi vfat defaults 0 1 # /home was on /dev/sda5 during installation UUID=d62515fd-8120-4a74-b17b-0bdf244124a3 /home ext4 defaults 0 2 # swap was on /dev/sda6 during installation UUID=7078b649-fb2a-4c59-bd03-fd31ef440d37 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda4: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 129.422874451 = 138.966753280 boot/grub/grub.cfg 1 83.059570312 = 89.184534528 boot/initrd.img-3.2.0-20-generic 2 101.393131256 = 108.870045696 boot/vmlinuz-3.2.0-20-generic 1 83.059570312 = 89.184534528 initrd.img 2 101.393131256 = 108.870045696 vmlinuz 1 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-04-25__23h40 =================== boot-repair version : 3.18-0ppa3~precise boot-sav version : 3.18-0ppa4~precise glade2script version : 0.3.2.1-0ppa7~precise internet: connected python-software-properties version : 0.82.7 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 591 not upgraded. dpkg-preconfigure: unable to re-open stdin: No such file or directory boot-repair is executed in installed-session (Ubuntu precise (development branch) , precise , Ubuntu , x86_64) WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== OSPROBER: /dev/sda4:The OS now in use - Ubuntu precise (development branch) CurrentSession:linux =================== BLKID: /dev/sda3: UUID="EE06CC0506CBCCB1" TYPE="ntfs" /dev/sda1: UUID="885C-ED1B" TYPE="vfat" /dev/sda4: UUID="604dd3b2-64ca-4200-b8fb-820e8d0ca899" TYPE="ext4" /dev/sda5: UUID="d62515fd-8120-4a74-b17b-0bdf244124a3" TYPE="ext4" /dev/sda6: UUID="7078b649-fb2a-4c59-bd03-fd31ef440d37" TYPE="swap" 1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS. WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted. =================== /etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 #GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" EFI_OF_PART[1] (, ) =================== dmesg | grep EFI : [ 0.000000] EFI v2.00 by Lenovo [ 0.000000] Kernel-defined memdesc doesn't match the one from EFI! [ 0.000000] EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) [ 0.000000] EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000004e000) (0MB) [ 0.000000] EFI: mem02: type=3, attr=0xf, range=[0x000000000004e000-0x0000000000058000) (0MB) [ 0.000000] EFI: mem03: type=10, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB) [ 0.000000] EFI: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005e000) (0MB) [ 0.000000] EFI: mem05: type=4, attr=0xf, range=[0x000000000005e000-0x000000000005f000) (0MB) [ 0.000000] EFI: mem06: type=3, attr=0xf, range=[0x000000000005f000-0x00000000000a0000) (0MB) [ 0.000000] EFI: mem07: type=2, attr=0xf, range=[0x0000000000100000-0x00000000005b9000) (4MB) [ 0.000000] EFI: mem08: type=7, attr=0xf, range=[0x00000000005b9000-0x0000000020000000) (506MB) [ 0.000000] EFI: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB) [ 0.000000] EFI: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x00000000364e4000) (354MB) [ 0.000000] EFI: mem11: type=2, attr=0xf, range=[0x00000000364e4000-0x000000003726a000) (13MB) [ 0.000000] EFI: mem12: type=7, attr=0xf, range=[0x000000003726a000-0x0000000040000000) (141MB) [ 0.000000] EFI: mem13: type=0, attr=0xf, range=[0x0000000040000000-0x0000000040200000) (2MB) [ 0.000000] EFI: mem14: type=7, attr=0xf, range=[0x0000000040200000-0x000000009df35000) (1501MB) [ 0.000000] EFI: mem15: type=2, attr=0xf, range=[0x000000009df35000-0x00000000d39a0000) (858MB) [ 0.000000] EFI: mem16: type=4, attr=0xf, range=[0x00000000d39a0000-0x00000000d39c0000) (0MB) [ 0.000000] EFI: mem17: type=7, attr=0xf, range=[0x00000000d39c0000-0x00000000d5df5000) (36MB) [ 0.000000] EFI: mem18: type=4, attr=0xf, range=[0x00000000d5df5000-0x00000000d6990000) (11MB) [ 0.000000] EFI: mem19: type=7, attr=0xf, range=[0x00000000d6990000-0x00000000d6b82000) (1MB) [ 0.000000] EFI: mem20: type=1, attr=0xf, range=[0x00000000d6b82000-0x00000000d6b9f000) (0MB) [ 0.000000] EFI: mem21: type=7, attr=0xf, range=[0x00000000d6b9f000-0x00000000d77b0000) (12MB) [ 0.000000] EFI: mem22: type=4, attr=0xf, range=[0x00000000d77b0000-0x00000000d780a000) (0MB) [ 0.000000] EFI: mem23: type=7, attr=0xf, range=[0x00000000d780a000-0x00000000d7826000) (0MB) [ 0.000000] EFI: mem24: type=4, attr=0xf, range=[0x00000000d7826000-0x00000000d7868000) (0MB) [ 0.000000] EFI: mem25: type=7, attr=0xf, range=[0x00000000d7868000-0x00000000d7869000) (0MB) [ 0.000000] EFI: mem26: type=4, attr=0xf, range=[0x00000000d7869000-0x00000000d786a000) (0MB) [ 0.000000] EFI: mem27: type=7, attr=0xf, range=[0x00000000d786a000-0x00000000d786b000) (0MB) [ 0.000000] EFI: mem28: type=4, attr=0xf, range=[0x00000000d786b000-0x00000000d786c000) (0MB) [ 0.000000] EFI: mem29: type=7, attr=0xf, range=[0x00000000d786c000-0x00000000d786d000) (0MB) [ 0.000000] EFI: mem30: type=4, attr=0xf, range=[0x00000000d786d000-0x00000000d825f000) (9MB) [ 0.000000] EFI: mem31: type=7, attr=0xf, range=[0x00000000d825f000-0x00000000d8261000) (0MB) [ 0.000000] EFI: mem32: type=4, attr=0xf, range=[0x00000000d8261000-0x00000000d82f7000) (0MB) [ 0.000000] EFI: mem33: type=7, attr=0xf, range=[0x00000000d82f7000-0x00000000d82f8000) (0MB) [ 0.000000] EFI: mem34: type=4, attr=0xf, range=[0x00000000d82f8000-0x00000000d8705000) (4MB) [ 0.000000] EFI: mem35: type=7, attr=0xf, range=[0x00000000d8705000-0x00000000d8706000) (0MB) [ 0.000000] EFI: mem36: type=4, attr=0xf, range=[0x00000000d8706000-0x00000000d8761000) (0MB) [ 0.000000] EFI: mem37: type=7, attr=0xf, range=[0x00000000d8761000-0x00000000d8768000) (0MB) [ 0.000000] EFI: mem38: type=4, attr=0xf, range=[0x00000000d8768000-0x00000000d9b9f000) (20MB) [ 0.000000] EFI: mem39: type=7, attr=0xf, range=[0x00000000d9b9f000-0x00000000d9e4c000) (2MB) [ 0.000000] EFI: mem40: type=2, attr=0xf, range=[0x00000000d9e4c000-0x00000000d9e52000) (0MB) [ 0.000000] EFI: mem41: type=3, attr=0xf, range=[0x00000000d9e52000-0x00000000da59f000) (7MB) [ 0.000000] EFI: mem42: type=5, attr=0x800000000000000f, range=[0x00000000da59f000-0x00000000da6c3000) (1MB) [ 0.000000] EFI: mem43: type=5, attr=0x800000000000000f, range=[0x00000000da6c3000-0x00000000da79f000) (0MB) [ 0.000000] EFI: mem44: type=6, attr=0x800000000000000f, range=[0x00000000da79f000-0x00000000da8b1000) (1MB) [ 0.000000] EFI: mem45: type=6, attr=0x800000000000000f, range=[0x00000000da8b1000-0x00000000da99f000) (0MB) [ 0.000000] EFI: mem46: type=0, attr=0xf, range=[0x00000000da99f000-0x00000000daa22000) (0MB) [ 0.000000] EFI: mem47: type=0, attr=0xf, range=[0x00000000daa22000-0x00000000daa9b000) (0MB) [ 0.000000] EFI: mem48: type=0, attr=0xf, range=[0x00000000daa9b000-0x00000000daa9c000) (0MB) [ 0.000000] EFI: mem49: type=0, attr=0xf, range=[0x00000000daa9c000-0x00000000daa9f000) (0MB) [ 0.000000] EFI: mem50: type=10, attr=0xf, range=[0x00000000daa9f000-0x00000000daadd000) (0MB) [ 0.000000] EFI: mem51: type=10, attr=0xf, range=[0x00000000daadd000-0x00000000dab9f000) (0MB) [ 0.000000] EFI: mem52: type=9, attr=0xf, range=[0x00000000dab9f000-0x00000000dabdc000) (0MB) [ 0.000000] EFI: mem53: type=9, attr=0xf, range=[0x00000000dabdc000-0x00000000dabff000) (0MB) [ 0.000000] EFI: mem54: type=4, attr=0xf, range=[0x00000000dabff000-0x00000000dac00000) (0MB) [ 0.000000] EFI: mem55: type=7, attr=0xf, range=[0x0000000100000000-0x000000021e600000) (4582MB) [ 0.000000] EFI: mem56: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB) [ 0.000000] EFI: mem57: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) [ 0.000000] ACPI: UEFI 00000000dabde000 0003E (v01 LENOVO TP-8D 00001280 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dabdd000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dabdc000 00292 (v01 LENOVO TP-8D 00001280 PTL 00000002) [ 0.795807] fb0: EFI VGA frame buffer device [ 1.057243] EFI Variables Facility v0.08 2004-May-17 [ 9.122104] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver ReadEFI: /dev/sda , N 128 , 0 , , PRStart 1024 , PRSize 128 WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== PARTITIONS & DISKS: sda4 : sda, not-sepboot, grubenv-ok grub2, grub-efi, update-grub, 64, with-boot, is-os, gpt-but-not-EFI, fstab-has-bad-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, apt-get, grub-install, . sda3 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, gpt-but-not-EFI, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /mnt/boot-sav/sda3. sda1 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /boot/efi. sda5 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, gpt-but-not-EFI, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /home. sda : GPT-BIS, GPT, no-BIOS_boot, has-correctEFI, 2048 sectors * 512 bytes =================== PARTED: Model: ATA HITACHI HTS72323 (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 106MB 105MB fat32 EFI system partition boot 2 106MB 240MB 134MB Microsoft reserved partition msftres 3 240MB 87.2GB 87.0GB ntfs Basic data partition 4 87.2GB 169GB 81.9GB ext4 5 169GB 316GB 147GB ext4 6 316GB 320GB 4096MB linux-swap(v1) =================== MOUNT: /dev/sda4 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda1 on /boot/efi type vfat (rw) /dev/sda5 on /home type ext4 (rw) gvfs-fuse-daemon on /home/vierlex/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=vierlex) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /sys/block/sda: alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 size slaves stat subsystem trace uevent /dev: agpgart autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd full fuse hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sg0 shm snapshot snd stderr stdin stdout tpm0 uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 watchdog zero /dev/mapper: control /boot/efi: EFI /boot/efi/EFI: Boot Microsoft ubuntu /boot/efi/efi: Boot Microsoft ubuntu /boot/efi/efi/Boot: bootx64.efi /boot/efi/efi/ubuntu: grubx64.efi WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== DF: Filesystem Type Size Used Avail Use% Mounted on /dev/sda4 ext4 77G 4.1G 69G 6% / udev devtmpfs 3.9G 12K 3.9G 1% /dev tmpfs tmpfs 1.6G 864K 1.6G 1% /run none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 3.9G 152K 3.9G 1% /run/shm /dev/sda1 vfat 96M 18M 79M 19% /boot/efi /dev/sda5 ext4 137G 2.2G 128G 2% /home /dev/sda3 fuseblk 81G 30G 52G 37% /mnt/boot-sav/sda3 =================== FDISK: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf34fe538 Device Boot Start End Blocks Id System /dev/sda1 1 625142447 312571223+ ee GPT =================== Before mainwindow FSCK no PASTEBIN yes WUBI no WINBOOT yes recommendedrepair, purge, QTY_OF_PART_FOR_REINSTAL 1 no-kernel-purge UNHIDEBOOT_ACTION yes (10s), noflag () PART_TO_REINSTALL_GRUB sda4, FORCE_GRUB no (sda) REMOVABLEDISK no USE_SEPARATEBOOTPART no (sda3) grub2 () UNCOMMENT_GFXMODE no ATA ADD_KERNEL_OPTION no (acpi=off) MBR_TO_RESTORE ( ) EFI detected. Please check the options. =================== Actions FSCK no PASTEBIN yes WUBI no WINBOOT no bootinfo, nombraction, QTY_OF_PART_FOR_REINSTAL 1 no-kernel-purge UNHIDEBOOT_ACTION no (10s), noflag () PART_TO_REINSTALL_GRUB sda4, FORCE_GRUB no (sda) REMOVABLEDISK no USE_SEPARATEBOOTPART no (sda3) grub2 () UNCOMMENT_GFXMODE no ATA ADD_KERNEL_OPTION no (acpi=off) MBR_TO_RESTORE ( ) No change has been performed on your computer. See you soon! internet: connected Thanks for your time and attention. EDIT: additional Info Request =No boot loader is installed in the MBR of /dev/sda. But maybe this is how it is supposed to work? yea this is ok. boot stuff seems to be on a seperate partition, in my case sda1. I'm very new to this UEFI thing too. missing files like bootmgr i don't really have a clue :D but yea, maybe thats how it suppose to be? Instead and whats not shown in the log for some reason: There is additional microsoft bootfiles on sda1 under /efi/microsoft/ [much stuff] I remember also doing some kind of hack to make a UEFI windows 7 usb stick. http://jake.io/b/2011/installing-windows-7-with-uefi-boot-on-an-x220-from-usb/ In short: creating and placing bootx64.efi on the stick so it can be booted in UEFI mode. boot order i decide that in my BIOS. i read somwhere that the thinkpad x220 (essential part of the serial number: 4921 http://www.lenovo.com/shop/americas/content/user_guides/x220_x220i_x220tablet_x220itablet_ug_en.pdf) doesnt really have UEFI interface or something, still, these 2 options are listed with all the other usual devices you can give a boot priority to. Right now it looks like this: Boot Priority Order 1. ubuntu 2. Windows Boot Manager 3. USB FDD 4. USB HDD 5. ATA HDD0 HITACHI [random string]

    Read the article

  • How Expedia Made My New Bride Cry

    - by Lance Robinson
    Tweet this? Email Expedia and ask them to give me and my new wife our honeymoon? When Expedia followed up their failure with our honeymoon trip with a complete and total lack of acknowledgement of any responsibility for the problem and endless loops of explaining the issue over and over again - I swore that they would make it right. When they brought my new bride to tears, I got an immediate and endless supply of motivation. I hope you will help me make them make it right by posting our story on Twitter, Facebook, your blog, on Expedia itself, and when talking to your friends in person about their own travel plans.   If you are considering using them now for an important trip - reconsider. Short summary: We arrived early for a flight - but Expedia had made a mistake with the data they supplied to JetBlue and Emirates, which resulted in us not being able to check in (one leg of our trip was missing)!  At the time of this post, three people (myself, my wife, and an exceptionally patient JetBlue employee named Mary) each spent hours on the phone with Expedia.  I myself spent right at 3 hours (according to iPhone records), Lauren spent an hour and a half or so, and poor Mary was probably on the phone for a good 3.5 hours.  This is after 5 hours total at the airport.  If you add up our phone time, that is nearly 8 hours of phone time over a 5 hour period with little or no help, stall tactics (?), run-around, denial, shifting of blame, and holding. Details below (times are approximate): First, my wife and I were married yesterday - June 18th, the 3 year anniversary of our first date. She is awesome. She is the nicest person I have ever known, a ton of fun, absolutely beautiful in every way. Ok enough mushy - here are the dirty details. 2:30 AM - Early Check-in Attempt - we attempted to check-in for our flight online. Some sort of technology error on website, instructed to checkin at desk. 4:30 AM - Arrive at airport. Try to check-in at kiosk, get the same error. We got to the JetBlue desk at RDU International Airport, where Mary helped us. Mary discovered that the Expedia provided itinerary does not match the Expedia provided tickets. We are informed that when that happens American, JetBlue, and others that use the same software cannot check you in for the flight because. Why? Because the itinerary was missing a leg of our flight! Basically we were not shown in the system as definitely being able to make it home. Mary called Expedia and was put on hold by their automated system. 4:55 AM - Mary, myself, and my brand new bride all waited for about 25 minutes when finally I decided I would make a call myself on my iPhone while Mary was on the airport phone. In their automated system, I chose "make a new reservation", thinking they might answer a little more quickly than "customer service". Not surprisingly I was connected to an Expedia person within 1 minute. They informed me that they would have to forward me to a customer service specialist. I explained to them that we were already on hold for that and had been for nearly half an hour, that we were going on our honeymoon and that our flight would be leaving soon - could they please help us. "Yes, I will help you". I hand the phone to JetBlue Mary who explains the situation 3 or 4 times. Obviously I couldn't hear both ends of the conversation at this point, but the Expedia person explained what the problem was by stating exactly what Mary had just spent 15 minutes explaining. Mary calmly confirms that this is the problem, and asks Expedia to re-issue the itinerary. Expedia tells Mary that they'll have to transfer her to customer service. Mary asks for someone specific so that we get an answer this time, and goes on hold. Mary get's connected, explains the situation, and then Mary's connection gets terminated. 5:10 AM - Mary calls back to the Expedia automated system again, and we wait for about 5 minutes on hold this time before I pick up my iPhone and call Expedia again myself. Again I go to sales, a person picks up the phone in less than a minute. I explain the situation and let them know that we are now very close to missing our flight for our honeymoon, could they please help us. "Yes, I will help you". Again I give the phone to Mary who provides them with a call back number in case we get disconnected again and explains the situation again. More back and forth with Expedia doing nothing but repeating the same questions, Mary answering the questions with the same information she provided in the original explanation, and Expedia simply restating the problem. Mary again asks them to re-issue the itinerary, and explains that doing so will fix the problem. Expedia again repeats the problem instead of fixing it, and Mary's connection gets terminated. 5:20 AM - Mary again calls back to Expedia. My beautiful bride also calls on her own phone. At this point she is struggling to hold back her tears, stumbling through an explanation of all that has happened and that we are about to miss our flight. Please help us. "Yes, I will help". My beautiful bride's connection gets terminated. Ok, maybe this disconnection isn't an accident. We've now been disconnected 3 times on two different phones. 5:45 AM - I walk away and pleadingly beg a person to help me. They "escalate" the issue to "Rosy" (sp?) at Expedia. I go through the whole song and dance again with Rosy, who gives me the same treatment Mary was given. Rosy blames JetBlue for now having the correct data. Meanwhile Mary is on the phone with Emirates Air (the airline for the second leg of our trip), who agrees with JetBlue that Expedia's data isn't up to date. We are informed by two airport employees that issues like this with Expedia are not uncommon, and that the fix is simple. On the phone iwth Rosy, I ask her to re-issue the itinerary because we are about to miss our flight. She again explains the problem to me. At this point, I am standing at the window, pleading with Rosy to help us get to our honeymoon, watching our airplane. Then our airplane leaves without us. 6:03 AM - At this point we have missed our flight. Re-issuing the itinerary is no longer a solution. I ask Rosy to start from the beginning and work us up a new trip. She says that she cannot do that. She says that she needs to talk to JetBlue and Emirates and find out why we cannot check-in for our flight. I remind Rosy that our flight has already left - I just watched it taxi away - it no longer matters why (not to mention the fact that we already knew why, and have known why since 4:30 AM), and have known the solution since 4:30 AM. Rosy, can you please book a new trip? Yes, but it will cost $400. Excuse me? Now you can, but it will cost ME to fix your mistake? Rosy says that she can escalate the situation to her supervisor but that will take 1.5 hours. 6:15 AM - I told Rosy that if they had re-issued the itinerary as JetBlue asked (at 4:30 AM), my new wife and I might be on the airplane now instead of dealing with this on the phone and missing the beginning (and how much more?) of our honeymoon. Rosy said that it was not necessary to re-issue the itinerary. Out of curiosity, i asked Rosy if there was some financial burden on them to re-issue the itinerary. "No", said Rosy. I asked her if it was a large time burden on Expedia to re-issue the itinerary. "No", said Rosy. I directly asked Rosy: Why wouldn't Expedia have re-issued the itinerary when JetBlue asked? No answer. I asked Rosy: If you had re-issued the itinerary at 4:30, isn't it possible that I would be on that flight right now? She actually surprised me by answering "Yes" to that question. So I pointed out that it followed that Expedia was responsible for the fact that we missed out flight, and she immediately went into more about how the problem was with JetBlue - but now it was ALSO an Emirates Air problem as well. I tell Rosy to go ahead and escalate the issue again, and please call me back in that 1.5 hours (which how is about 1 hour and 10 minutes away). 6:30 AM - I start tweeting my frustration with iPhone. It's now pretty much impossible for us to make it to The Maldives by 3pm, which is the time at which we would need to arrive in order to be allowed service to the actual island where we are staying. Expedia has now given me the run-around for 2 hours, caused me to miss my flight, and worst of all caused my amazing new wife Lauren to miss our honeymoon. You think I was mad? No. Furious. Its ok to make mistakes - but to refuse to fix them and to ruin our honeymoon? No, not ok, Expedia. I swore right then that Expedia would make this right. 7:45 AM - JetBlue mary is still talking her tail off to other people in JetBlue and Emirates Air. Mary works it out so that if Expedia simply books a new trip, JetBlue and Emirates will both waive all the fees. Now we just have to convince Expedia to fix their mistake and get us on our way! Around this time Expedia Rosy calls me back! I inform her of the excellent work of JetBlue Mary - that JetBlue and Emirates both will waive the fees so Expedia can fix their mistake and get us going on our way. She says that she sees documentation of this in her system and that she needs to put me on hold "for 1 to 10 minutes" to talk to Emirates Air (why I'm not exactly sure). I say ok. 8:45 AM - After an hour on hold, Rosy comes on the line and asks me to hold more. I ask her to call me back. 9:35 AM - I put down the iPhone Twitter app and picks up the laptop. You think I made some noise with my iPhone? Heh 11:25 AM - Expedia follows me and sends a canned "We're sorry, DM us the details".  If you look at their Twitter feed, 16 out of the most recent 20 tweets are exactly the same canned response.  The other 4?  Ads.  Um - #MultiFAIL? To Expedia:  You now have had (as explained above) 8 hours of 3 different people explaining our situation, you know the email address of our Expedia account, you know my web blog, you know my Twitter address, you know my phone number.  You also know how upset you have made both me and my new bride by treating us with such a ... non caring, scripted, uncooperative, argumentative, and possibly even deceitful manner.  In the wise words of the great Kenan Thompson of SNL: "FIX IT!".  And no, I'm NOT going away until you make this right. Period. 11:45 AM - Expedia corporate office called.  The woman I spoke to was very nice and apologetic.  She listened to me tell the story again, she says she understands the problem and she is going to work to resolve it.  I don't have any details on what exactly that resolution might me, she said she will call me back in 20 minutes.  She found out about the problem via Twitter.  Thank you Twitter, and all of you who helped.  Hopefully social media will win my wife and I our honeymoon, and hopefully Expedia will encourage their customer service teams treat their customers properly. 12:22 PM - Spoke to Fran again from Expedia corporate office.  She has a flight for us tonight.  She is booking it now.  We will arrive at our honeymoon destination of beautiful Veligandu Island Resort only 1 day late.  She cannot confirm today, but she expects that Expedia will pay for the lost honeymoon night.  Thank you everyone for your help.  I will reflect more on this whole situation and confirm its resolution after our flight is 100% confirmed.  For now, I'm going to take a breather and go kiss my wonderful wife! 1:50 PM - Have not yet received the promised phone call.  We did receive an email with a new itinerary for a flight but the booking is not for specific seats, so there is no guarantee that my wife and I will be able to sit together.  With the original booking I carefully selected our seats for every segment of our trip.  I decided to call into the phone number that Fran from the Expedia corporate office gave me.  Its automated voice system identified itself as "Tier 3 Support".  I am currently still on hold with them, I have not gotten through to a human yet. 1:55 PM - Fran from Expedia called me back.  She confirmed us as booked.  She called the airlines to confirm.  Unfortunately, Expedia was unwilling or unable to allow us any type of seat selection.  It is possible that i won't get to sit next to the woman I married less than a day ago on our 40 total hours of flight time (there and back).  In addition, our seats could be the worst seats on the planes, with no reclining seat back or right next to the restroom.  Despite this fact (which in my opinion is huge), the horrible inconvenience, the hours at the airport, and the negative Internet publicity that Expedia is receiving, Expedia declined to offer us any kind of upgrade or to mark us as SFU (suitable for upgrade).  Since they didn't offer - I asked, and was rejected.  I am grateful to finally be heading in the right direction, but not only did Expedia horribly botch this job from the very beginning, they followed that botch job with near zero customer service, followed by a verbally apologetic but otherwise half-hearted resolution.  If this works out favorably for us, great.  If not - I'm not done making noise, Expedia.  You owe us, and I expect you to make it right.  You haven't quite done that yet. Thanks - Thank you to Twitter.  Thanks to all those who sympathize with us and helped us get the attention of Expedia, since three people (one of them an airline employee) using Expedia's normal channels of communication for many hours didn't help.  Thanks especially to my PowerShell and Sharepoint friends, my local friends, and those connectors who encouraged me and spread my story. 5:15 PM - Love Wins - After all this, Lauren and I are exhausted.  We both took a short nap, and when we woke up we talked about the last 24 hours.  It was a big, amazing, story-filled 24 hours.  I said that Expedia won, but Lauren said no.  She pointed out how lucky we are.  We are in love and married.  We have wonderful family and friends.  We are both hard-working successful people who love what they do.  We get to go to an amazing exotic destination for our honeymoon like Veligandu in The Maldives...  That's a lot of good.  Expedia didn't win.  This was (is) a big loss for Expedia.  It is a public blemish for all to see.  But Lauren and I did win, big time.  Expedia may not have made things right - but things are right for us.  Post in progress... I will relay any further comments (or lack of) from Expedia soon, as well as an update on confirmation of their repayment of our lost resort room rates.  I'll also post a picture of us on our honeymoon as soon as I can!

    Read the article

  • Getting started with Exchange Web Services 2010

    - by Adam Tuttle
    I've been tasked with writing a SOAP web-service in .Net to be middleware between EWS2010 and an application server that previously used WebDAV to connect to Exchange. (As I understand it, WebDAV is going away with EWS2010, so the application server will no longer be able to connect as it previously did, and it is exponentially harder to connect to EWS without WebDAV. The theory is that doing it in .Net should be easier than anything else... Right?!) My end goal is to be able to get and create/update email, calendar items, contacts, and to-do list items for a specified Exchange account. (Deleting is not currently necessary, but I may build it in for future consideration, if it's easy enough). I was originally given some sample code, which did in fact work, but I quickly realized that it was outdated. The types and classes used appear nowhere in the current documentation. For example, the method used to create a connection to the Exchange server was: ExchangeService svc = new ExchangeService(); svc.Credentials = new WebCredentials(AuthEmailAddress, AuthEmailPassword); svc.AutodiscoverUrl(AutoDiscoverEmailAddress); For what it's worth, this was using an assembly that came with the sample code: Microsoft.Exchange.WebServices.dll ("MEWS"). Before I realized that this wasn't the current standard way to accomplish the connection, and it worked, I tried to build on it and add a method to create calendar items, which I copied from here: static void CreateAppointment(ExchangeServiceBinding esb) { // Create the appointment. CalendarItemType appointment = new CalendarItemType(); ... } Right away, I'm confronted with the difference between ExchangeService and ExchangeServiceBinding ("ESB"); so I started Googling to try and figure out how to get an ESB definition so that the CreateAppointment method will compile. I found this blog post that explains how to generate a proxy class from a WSDL, which I did. Unfortunately, this caused some conflicts where types that were defined in the original Assembly, Microsoft.Exchange.WebServices.dll (that came with the sample code) overlapped with Types in my new EWS.dll assembly (which I compiled from the code generated from the services.wsdl provided by the Exchange server). I excluded the MEWS assembly, which only made things worse. I went from a handful of errors and warnings to 25 errors and 2,510 warnings. All kinds of types and methods were not found. Something is clearly wrong, here. So I went back on the hunt. I found instructions on adding service references and web references (i.e. the extra steps it takes in VS2008), and I think I'm back on the right track. I removed (actually, for now, just excluded) all previous assemblies I had been trying; and I added a service reference for https://my.exchange-server.com/ews/services.wsdl Now I'm down to just 1 error and 1 warning. Warning: The element 'transport' cannot contain child element 'extendedProtectionPolicy' because the parent element's content model is empty. This is in reference to a change that was made to web.config when I added the service reference; and I just found a fix for that here on SO. I've commented that section out as indicated, and it did make the warning go away, so woot for that. The error hasn't been so easy to get around, though: Error: The type or namespace name 'ExchangeService' could not be found (are you missing a using directive or an assembly reference?) This is in reference to the function I was using to create the EWS connection, called by each of the web methods: private ExchangeService getService(String AutoDiscoverEmailAddress, String AuthEmailAddress, String AuthEmailPassword) { ExchangeService svc = new ExchangeService(); svc.Credentials = new WebCredentials(AuthEmailAddress, AuthEmailPassword); svc.AutodiscoverUrl(AutoDiscoverEmailAddress); return svc; } This function worked perfectly with the MEWS assembly from the sample code, but the ExchangeService type is no longer available. (Nor is ExchangeServiceBinding, that was the first thing I checked.) At this point, since I'm not following any directions from the documentation (I couldn't find anywhere in the documentation that said to add a service reference to your Exchange server's services.wsdl -- but that does seem to be the best/farthest I've gotten so far), I feel like I'm flying blind. I know I need to figure out whatever it is that should replace ExchangeService / ExchangeServiceBinding, implement that, and then work through whatever errors crop up as a result of that switch... But I have no idea how to do that, or where to look for how to do it. Googling "ExchangeService" and "ExchangeServiceBinding" only seem to lead back to outdated blog posts and MSDN, neither of which has proven terribly helpful thus far. Help me, Obi-Wan, you're my only hope!

    Read the article

  • Unable to boot Windows 7 after installing Ubuntu

    - by Devendra
    I have Windows 7 on my machine and then installed Ubuntu 12.04 using a live CD. I can see both Windows 7 and Ubuntu in the grub menu, but when I select Windows 7 it shows a black screen for about 2 seconds and the returns to the Grub menu. But if I select Ubuntu it's working fine. This is the contents of the boot-repair log: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for (,msdos6)/boot/grub. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Grub2 (v1.99-2.00) Boot sector info: Grub2 (v2.00) is installed in the boot sector of sda1 and looks at sector 388911128 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for (,msdos6)/boot/grub. No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda4: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048. Operating System: Boot files: sda6: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.10 Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/i386-pc/core.img sda7: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 206,848 146,802,687 146,595,840 7 NTFS / exFAT / HPFS /dev/sda2 147,007,488 293,623,807 146,616,320 7 NTFS / exFAT / HPFS /dev/sda3 293,623,808 332,820,613 39,196,806 7 NTFS / exFAT / HPFS /dev/sda4 332,822,526 1,465,145,343 1,132,322,818 f W95 Extended (LBA) /dev/sda5 461,342,720 1,465,145,343 1,003,802,624 7 NTFS / exFAT / HPFS /dev/sda6 332,822,528 453,171,199 120,348,672 83 Linux /dev/sda7 453,173,248 461,338,623 8,165,376 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 F6AE2C13AE2BCB47 ntfs /dev/sda2 DC2273012272DFC6 ntfs /dev/sda3 1E76E43376E40D79 ntfs New Volume /dev/sda5 5ED60ACDD60AA57D ntfs /dev/sda6 9e70fd16-b48b-4f88-adcf-e443aef83124 ext4 /dev/sda7 52f3dd94-6be7-4a7b-a3ae-f43eb8810483 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda6 / ext4 (rw,errors=remount-ro) =========================== sda6/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_msdos insmod ext2 set root='hd0,msdos6' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 9e70fd16-b48b-4f88-adcf-e443aef83124 else search --no-floppy --fs-uuid --set=root 9e70fd16-b48b-4f88-adcf-e443aef83124 fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=auto load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_IN insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-9e70fd16-b48b-4f88-adcf-e443aef83124' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos6' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 9e70fd16-b48b-4f88-adcf-e443aef83124 else search --no-floppy --fs-uuid --set=root 9e70fd16-b48b-4f88-adcf-e443aef83124 fi linux /boot/vmlinuz-3.5.0-17-generic root=UUID=9e70fd16-b48b-4f88-adcf-e443aef83124 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.5.0-17-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-9e70fd16-b48b-4f88-adcf-e443aef83124' { menuentry 'Ubuntu, with Linux 3.5.0-17-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-advanced-9e70fd16-b48b-4f88-adcf-e443aef83124' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos6' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 9e70fd16-b48b-4f88-adcf-e443aef83124 else search --no-floppy --fs-uuid --set=root 9e70fd16-b48b-4f88-adcf-e443aef83124 fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=9e70fd16-b48b-4f88-adcf-e443aef83124 ro quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } menuentry 'Ubuntu, with Linux 3.5.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-recovery-9e70fd16-b48b-4f88-adcf-e443aef83124' { recordfail insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos6' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 9e70fd16-b48b-4f88-adcf-e443aef83124 else search --no-floppy --fs-uuid --set=root 9e70fd16-b48b-4f88-adcf-e443aef83124 fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=9e70fd16-b48b-4f88-adcf-e443aef83124 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='hd0,msdos6' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 9e70fd16-b48b-4f88-adcf-e443aef83124 else search --no-floppy --fs-uuid --set=root 9e70fd16-b48b-4f88-adcf-e443aef83124 fi linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='hd0,msdos6' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 9e70fd16-b48b-4f88-adcf-e443aef83124 else search --no-floppy --fs-uuid --set=root 9e70fd16-b48b-4f88-adcf-e443aef83124 fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows 7 (loader) (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-F6AE2C13AE2BCB47' { insmod part_msdos insmod ntfs set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 F6AE2C13AE2BCB47 else search --no-floppy --fs-uuid --set=root F6AE2C13AE2BCB47 fi chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda6/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda6 during installation UUID=9e70fd16-b48b-4f88-adcf-e443aef83124 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda7 during installation UUID=52f3dd94-6be7-4a7b-a3ae-f43eb8810483 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda6: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 162.831275940 = 174.838751232 boot/grub/grub.cfg 1 163.036647797 = 175.059267584 boot/initrd.img-3.5.0-17-generic 1 206.871749878 = 222.126850048 boot/vmlinuz-3.5.0-17-generic 1 163.036647797 = 175.059267584 initrd.img 1 163.036647797 = 175.059267584 initrd.img.old 1 206.871749878 = 222.126850048 vmlinuz 1 =============================== StdErr Messages: =============================== cat: write error: Broken pipe cat: write error: Broken pipe ADDITIONAL INFORMATION : =================== log of boot-repair 2012-12-11__00h59 =================== boot-repair version : 3.195~ppa28~quantal boot-sav version : 3.195~ppa28~quantal glade2script version : 3.2.2~ppa45~quantal boot-sav-extra version : 3.195~ppa28~quantal boot-repair is executed in installed-session (Ubuntu 12.10, quantal, Ubuntu, x86_64) CPU op-mode(s): 32-bit, 64-bit BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=9e70fd16-b48b-4f88-adcf-e443aef83124 ro quiet splash vt.handoff=7 =================== os-prober: /dev/sda6:The OS now in use - Ubuntu 12.10 CurrentSession:linux /dev/sda1:Windows 7 (loader):Windows:chain =================== blkid: /dev/sda1: UUID="F6AE2C13AE2BCB47" TYPE="ntfs" /dev/sda2: UUID="DC2273012272DFC6" TYPE="ntfs" /dev/sda3: LABEL="New Volume" UUID="1E76E43376E40D79" TYPE="ntfs" /dev/sda5: UUID="5ED60ACDD60AA57D" TYPE="ntfs" /dev/sda6: UUID="9e70fd16-b48b-4f88-adcf-e443aef83124" TYPE="ext4" /dev/sda7: UUID="52f3dd94-6be7-4a7b-a3ae-f43eb8810483" TYPE="swap" 1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== /etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== /etc/grub.d/ : drwxr-xr-x 2 root root 4096 Oct 17 20:29 grub.d total 72 -rwxr-xr-x 1 root root 7541 Oct 14 23:06 00_header -rwxr-xr-x 1 root root 5488 Oct 4 15:00 05_debian_theme -rwxr-xr-x 1 root root 10891 Oct 14 23:06 10_linux -rwxr-xr-x 1 root root 10258 Oct 14 23:06 20_linux_xen -rwxr-xr-x 1 root root 1688 Oct 11 19:40 20_memtest86+ -rwxr-xr-x 1 root root 10976 Oct 14 23:06 30_os-prober -rwxr-xr-x 1 root root 1426 Oct 14 23:06 30_uefi-firmware -rwxr-xr-x 1 root root 214 Oct 14 23:06 40_custom -rwxr-xr-x 1 root root 216 Oct 14 23:06 41_custom -rw-r--r-- 1 root root 483 Oct 14 23:06 README =================== UEFI/Legacy mode: This installed-session is not in EFI-mode. EFI in dmesg. Please report this message to [email protected] [ 0.000000] ACPI: UEFI 00000000bafe7000 0003E (v01 DELL QA09 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000bafe6000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000bafe3000 00256 (v01 DELL QA09 00000002 PTL 00000002) SecureBoot disabled. =================== PARTITIONS & DISKS: sda6 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, . sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1. sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2. sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3. sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes =================== parted -l: Model: ATA WDC WD7500BPKT-7 (scsi) Disk /dev/sda: 750GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 106MB 75.2GB 75.1GB primary ntfs boot 2 75.3GB 150GB 75.1GB primary ntfs 3 150GB 170GB 20.1GB primary ntfs 4 170GB 750GB 580GB extended lba 6 170GB 232GB 61.6GB logical ext4 7 232GB 236GB 4181MB logical linux-swap(v1) 5 236GB 750GB 514GB logical ntfs =================== parted -lm: BYT; /dev/sda:750GB:scsi:512:4096:msdos:ATA WDC WD7500BPKT-7; 1:106MB:75.2GB:75.1GB:ntfs::boot; 2:75.3GB:150GB:75.1GB:ntfs::; 3:150GB:170GB:20.1GB:ntfs::; 4:170GB:750GB:580GB:::lba; 6:170GB:232GB:61.6GB:ext4::; 7:232GB:236GB:4181MB:linux-swap(v1)::; 5:236GB:750GB:514GB:ntfs::; =================== mount: /dev/sda6 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) gvfsd-fuse on /run/user/dev/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=dev) /dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): alarm ashmem autofs binder block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fb1 fd full fuse hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom v4l vga_arbiter vhost-net video0 zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /dev/sda6 ext4 57G 2.7G 51G 6% / udev devtmpfs 1.9G 12K 1.9G 1% /dev tmpfs tmpfs 770M 892K 769M 1% /run none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 1.9G 260K 1.9G 1% /run/shm none tmpfs 100M 44K 100M 1% /run/user /dev/sda1 fuseblk 70G 36G 35G 51% /mnt/boot-sav/sda1 /dev/sda2 fuseblk 70G 66G 4.8G 94% /mnt/boot-sav/sda2 /dev/sda3 fuseblk 19G 87M 19G 1% /mnt/boot-sav/sda3 /dev/sda5 fuseblk 479G 436G 44G 92% /mnt/boot-sav/sda5 =================== fdisk -l: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x1dc69d0b Device Boot Start End Blocks Id System /dev/sda1 * 206848 146802687 73297920 7 HPFS/NTFS/exFAT /dev/sda2 147007488 293623807 73308160 7 HPFS/NTFS/exFAT /dev/sda3 293623808 332820613 19598403 7 HPFS/NTFS/exFAT /dev/sda4 332822526 1465145343 566161409 f W95 Ext'd (LBA) Partition 4 does not start on physical sector boundary. /dev/sda5 461342720 1465145343 501901312 7 HPFS/NTFS/exFAT /dev/sda6 332822528 453171199 60174336 83 Linux /dev/sda7 453173248 461338623 4082688 82 Linux swap / Solaris Partition table entries are not in disk order =================== Recommended repair Recommended-Repair This setting will reinstall the grub2 of sda6 into the MBR of sda. Additional repair will be performed: unhide-bootmenu-10s grub-install (GRUB) 2.00-7ubuntu11,grub-install (GRUB) 2. Reinstall the GRUB of sda6 into the MBR of sda Installation finished. No error reported. grub-install /dev/sda: exit code of grub-install /dev/sda:0 update-grub Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.5.0-17-generic Found initrd image: /boot/initrd.img-3.5.0-17-generic Found memtest86+ image: /boot/memtest86+.bin Found Windows 7 (loader) on /dev/sda1 Unhide GRUB boot menu in sda6/boot/grub/grub.cfg Boot successfully repaired. You can now reboot your computer. The boot files of [The OS now in use - Ubuntu 12.10] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition)

    Read the article

  • Cannot find root device after latest kernel upgrade

    - by DisgruntledGoat
    I'm running Ubuntu 13.04. Yesterday I tried to install updates but there was an error, and it suggested running apt-get -f install which I did. Now when I try to boot, I get an error "Gave up waiting for root device". The text is almost identical to the text shown in this and this question. However, the "built-in shell" simply doesn't work! Nothing I type shows up on the screen or does anything. I tried adding a rootdelay to grub but it just waits longer and shows the same screen. Loading the previous kernel works (although there are a few graphics glitches) but as far as I can tell, it should be booting the exact same stuff. The new kernel is 3.8.0-31-generic and the previous working one is 3.8.0-25-generic. Here is my entire /boot/grub/menu.lst file, comments removed: default 0 timeout 3 title Ubuntu 13.04, kernel 3.8.0-31-generic uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-31-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac rootdelay=120 ro quiet splash initrd /boot/initrd.img-3.8.0-31-generic quiet title Ubuntu 13.04, kernel 3.8.0-31-generic (recovery mode) uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-31-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro single initrd /boot/initrd.img-3.8.0-31-generic title Ubuntu 13.04, kernel 3.8.0-25-generic uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-25-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro quiet splash initrd /boot/initrd.img-3.8.0-25-generic quiet title Ubuntu 13.04, kernel 3.8.0-25-generic (recovery mode) uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-25-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro single initrd /boot/initrd.img-3.8.0-25-generic title Ubuntu 13.04, kernel 3.8.0-23-generic uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-23-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro quiet splash initrd /boot/initrd.img-3.8.0-23-generic quiet title Ubuntu 13.04, kernel 3.8.0-23-generic (recovery mode) uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-23-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro single initrd /boot/initrd.img-3.8.0-23-generic title Ubuntu 13.04, memtest86+ uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/memtest86+.bin quiet title -------------------------------- root title Windows Vista rootnoverify (hd0,2) savedefault makeactive chainloader +1 As you can see the UUID is the same for all kernels. Why am I getting this problem, and what can I do to fix it?

    Read the article

  • dpkg stuck downloading font files

    - by Bob Bowles
    I have been reinstalling Ubuntu 12.04. The install from USB works fine, and I could update everything OK, but when I got to re-installing my application software I hit a snag. One of the packages I tried to re-install was ttf-mscorefonts-installer. dpkg stalled during this setup, downloading a font file (it had tried to download it all night). I stopped dpkg, and attempted to re-start downloading something else, but it would not let me. The commands I typed are as follows: bob@bobStudio:~$ sudo rm /var/lib/dpkg/lock This unlocks dpkg, but if I try to do something I get the following message (eg): bob@bobStudio:~$ sudo apt-get install synaptic E: dpgk was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem So, I did just that: bob@bobStudio:~$ sudo dpkg --configure -a whereupon it started the previously failed download all over again. I went round the loop here a few times and each time after the configure command it re-started the failing download, but then I got this: bob@bobStudio:~$ sudo dpkg --configure -a Setting up update-notifier-common (0.119ubuntu8.4) ... ttf-mscorefonts-installer: downloading http://downloads.sourceforge.net/corefonts/andale32.exe Traceback (most recent call last): File "/usr/lib/update-notifier/package-data-downloader", line 234, in process_download_requests dest_file = urllib.urlretrieve(files[i])[0] File "/usr/lib/python2.7/urllib.py", line 93, in urlretrieve return _urlopener.retrieve(url, filename, reporthook, data) File "/usr/lib/python2.7/urllib.py", line 239, in retrieve fp = self.open(url, data) File "/usr/lib/python2.7/urllib.py", line 207, in open return getattr(self, name)(url) File "/usr/lib/python2.7/urllib.py", line 344, in open_http h.endheaders(data) File "/usr/lib/python2.7/httplib.py", line 954, in endheaders self._send_output(message_body) File "/usr/lib/python2.7/httplib.py", line 814, in _send_output self.send(msg) File "/usr/lib/python2.7/httplib.py", line 776, in send self.connect() File "/usr/lib/python2.7/httplib.py", line 757, in connect self.timeout, self.source_address) File "/usr/lib/python2.7/socket.py", line 553, in create_connection for res in getaddrinfo(host, port, 0, SOCK_STREAM): IOError: [Errno socket error] [Errno -2] Name or service not known Setting up ttf-mscorefonts-installer (3.4ubuntu3) ... bob@bobStudio:~$ sudo apt-get update E: Could not get lock /var/lib/apt/lists/lock - open (11: Resource temporarily unavailable) E: Unable to lock directory /var/lib/apt/lists/ bob@bobStudio:~$ sudo rm /var/lib/dpkg/lock bob@bobStudio:~$ sudo apt-get update E: Could not get lock /var/lib/apt/lists/lock - open (11: Resource temporarily unavailable) E: Unable to lock directory /var/lib/apt/lists/ The good news is that, once I sorted out the file locks, this seems to have permanently aborted the setup of the font package, so at least I can do something else with dpkg. That leaves two questions: 1) How could I have broken the loop without actually crashing out of dpkg? 2) How can I set up the ttf-mscorefonts-installer package in the future? Is this download really broken, or is it 'just' a bad Internet connection?

    Read the article

  • REST API Help in Rails

    - by dannymcc
    Hi Everyone, I am trying to get some information posted using our accountancy package (FreeAgentCentral) using their API via a GEM. http://github.com/aaronrussell/freeagent_api/ I have the following code to get it working (supposedly): Kase Controller def create @kase = Kase.new(params[:kase]) @company = Company.find(params[:kase][:company_id]) @kase = @company.kases.create!(params[:kase]) respond_to do |format| if @kase.save UserMailer.deliver_makeakase("[email protected]", "Highrise", @kase) @kase.create_freeagent_project(current_user) #flash[:notice] = 'Case was successfully created.' flash[:notice] = fading_flash_message("Case was successfully created & sent to Highrise.", 5) format.html { redirect_to(@kase) } format.xml { render :xml => @kase, :status => :created, :location => @kase } else format.html { render :action => "new" } format.xml { render :xml => @kase.errors, :status => :unprocessable_entity } end end end To save you looking through, the important part is: @kase.create_freeagent_project(current_user) Kase Model # FreeAgent API Project Create # Required attribues # :contact_id # :name # :payment_term_in_days # :billing_basis # must be 1, 7, 7.5, or 8 # :budget_units # must be Hours, Days, or Monetary # :status # must be Active or Completed def create_freeagent_project(current_user) p = Freeagent::Project.create( :contact_id => 0, :name => "#{jobno} - #{highrisesubject}", :payment_terms_in_days => 5, :billing_basis => 1, :budget_units => 'Hours', :status => 'Active' ) user = Freeagent::User.find_by_email(current_user.email) Freeagent::Timeslip.create( :project_id => p.id, :user_id => user.id, :hours => 1, :new_task => 'Setup', :dated_on => Time.now ) end lib/freeagent_api.rb require 'rubygems' gem 'activeresource', '< 3.0.0.beta1' require 'active_resource' module Freeagent class << self def authenticate(options) Base.authenticate(options) end end class Error < StandardError; end class Base < ActiveResource::Base def self.authenticate(options) self.site = "https://#{options[:domain]}" self.user = options[:username] self.password = options[:password] end end # Company class Company def self.invoice_timeline InvoiceTimeline.find :all, :from => '/company/invoice_timeline.xml' end def self.tax_timeline TaxTimeline.find :all, :from => '/company/tax_timeline.xml' end end class InvoiceTimeline < Base self.prefix = '/company/' end class TaxTimeline < Base self.prefix = '/company/' end # Contacts class Contact < Base end # Projects class Project < Base def invoices Invoice.find :all, :from => "/projects/#{id}/invoices.xml" end def timeslips Timeslip.find :all, :from => "/projects/#{id}/timeslips.xml" end end # Tasks - Complete class Task < Base self.prefix = '/projects/:project_id/' end # Invoices - Complete class Invoice < Base def mark_as_draft connection.put("/invoices/#{id}/mark_as_draft.xml", encode, self.class.headers).tap do |response| load_attributes_from_response(response) end end def mark_as_sent connection.put("/invoices/#{id}/mark_as_sent.xml", encode, self.class.headers).tap do |response| load_attributes_from_response(response) end end def mark_as_cancelled connection.put("/invoices/#{id}/mark_as_cancelled.xml", encode, self.class.headers).tap do |response| load_attributes_from_response(response) end end end # Invoice items - Complete class InvoiceItem < Base self.prefix = '/invoices/:invoice_id/' end # Timeslips class Timeslip < Base def self.find(*arguments) scope = arguments.slice!(0) options = arguments.slice!(0) || {} if options[:params] && options[:params][:from] && options[:params][:to] options[:params][:view] = options[:params][:from]+'_'+options[:params][:to] options[:params].delete(:from) options[:params].delete(:to) end case scope when :all then find_every(options) when :first then find_every(options).first when :last then find_every(options).last when :one then find_one(options) else find_single(scope, options) end end end # Users class User < Base self.prefix = '/company/' def self.find_by_email(email) users = User.find :all users.each do |u| u.email == email ? (return u) : next end raise Error, "No user matches that email!" end end end config/initializers/freeagent.rb Freeagent.authenticate({ :domain => 'XXXXX.freeagentcentral.com', :username => '[email protected]', :password => 'XXXXXX' }) The above render the following error when trying to create a new Case and send the details to FreeAgent: ActiveResource::ResourceNotFound in KasesController#create Failed with 404 Not Found and ActiveResource::ResourceNotFound (Failed with 404 Not Found): app/models/kase.rb:56:in `create_freeagent_project' app/controllers/kases_controller.rb:96:in `create' app/controllers/kases_controller.rb:93:in `create' Rendered rescues/_trace (176.5ms) Rendered rescues/_request_and_response (1.1ms) Rendering rescues/layout (internal_server_error) If anyone can shed any light on this problem it would be greatly appreciated! Thanks, Danny

    Read the article

  • Looking into Enum Support in Entity Framework 5.0 Code First

    - by nikolaosk
    In this post I will show you with a hands-on demo the enum support that is available in Visual Studio 2012, .Net Framework 4.5 and Entity Framework 5.0. You can have a look at this post to learn about the support of multilple diagrams per model that exists in Entity Framework 5.0. We will demonstrate this with a step by step example. I will use Visual Studio 2012 Ultimate. You can also use Visual Studio 2012 Express Edition. Before I move on to the actual demo I must say that in EF 5.0 an enumeration can have the following types. Byte Int16 Int32 Int64 Sbyte Obviously I cannot go into much detail on what EF is and what it does. I will give again a short introduction.The .Net framework provides support for Object Relational Mapping through EF. So EF is a an ORM tool and it is now the main data access technology that microsoft works on. I use it quite extensively in my projects. Through EF we have many things out of the box provided for us. We have the automatic generation of SQL code.It maps relational data to strongly types objects.All the changes made to the objects in the memory are persisted in a transactional way back to the data store. You can find in this post an example on how to use the Entity Framework to retrieve data from an SQL Server Database using the "Database/Schema First" approach. In this approach we make all the changes at the database level and then we update the model with those changes. In this post you can see an example on how to use the "Model First" approach when working with ASP.Net and the Entity Framework. This model was firstly introduced in EF version 4.0 and we could start with a blank model and then create a database from that model.When we made changes to the model , we could recreate the database from the new model. You can search in my blog, because I have posted many posts regarding ASP.Net and EF. I assume you have a working knowledge of C# and know a few things about EF. The Code First approach is the more code-centric than the other two. Basically we write POCO classes and then we persist to a database using something called DBContext. Code First relies on DbContext. We create 2,3 classes (e.g Person,Product) with properties and then these classes interact with the DbContext class. We can create a new database based upon our POCOS classes and have tables generated from those classes.We do not have an .edmx file in this approach.By using this approach we can write much easier unit tests. DbContext is a new context class and is smaller,lightweight wrapper for the main context class which is ObjectContext (Schema First and Model First). Let's begin building our sample application. 1) Launch Visual Studio. Create an ASP.Net Empty Web application. Choose an appropriate name for your application. 2) Add a web form, default.aspx page to the application. 3) Now we need to make sure the Entity Framework is included in our project. Go to Solution Explorer, right-click on the project name.Then select Manage NuGet Packages...In the Manage NuGet Packages dialog, select the Online tab and choose the EntityFramework package.Finally click Install. Have a look at the picture below   4) Create a new folder. Name it CodeFirst . 5) Add a new item in your application, a class file. Name it Footballer.cs. This is going to be a simple POCO class.Place it in the CodeFirst folder. The code follows public class Footballer { public int FootballerID { get; set; } public string FirstName { get; set; } public string LastName { get; set; } public double Weight { get; set; } public double Height { get; set; } public DateTime JoinedTheClub { get; set; } public int Age { get; set; } public List<Training> Trainings { get; set; } public FootballPositions Positions { get; set; } }    Now I am going to define my enum values in the same class file, Footballer.cs    public enum FootballPositions    {        Defender,        Midfielder,        Striker    } 6) Now we need to create the Training class. Add a new class to your application and place it in the CodeFirst folder.The code for the class follows.     public class Training     {         public int TrainingID { get; set; }         public int TrainingDuration { get; set; }         public string TrainingLocation { get; set; }     }   7) Then we need to create a context class that inherits from DbContext.Add a new class to the CodeFirst folder.Name it FootballerDBContext.Now that we have the entity classes created, we must let the model know.I will have to use the DbSet<T> property.The code for this class follows       public class FootballerDBContext:DbContext     {         public DbSet<Footballer> Footballers { get; set; }         public DbSet<Training> Trainings { get; set; }     } Do not forget to add  (using System.Data.Entity;) in the beginning of the class file 8) We must take care of the connection string. It is very easy to create one in the web.config.It does not matter that we do not have a database yet.When we run the DbContext and query against it,it will use a connection string in the web.config and will create the database based on the classes. In my case the connection string inside the web.config, looks like this      <connectionStrings>    <add name="CodeFirstDBContext"  connectionString="server=.\SqlExpress;integrated security=true;"  providerName="System.Data.SqlClient"/>                       </connectionStrings>   9) Now it is time to create Linq to Entities queries to retrieve data from the database . Add a new class to your application in the CodeFirst folder.Name the file DALfootballer.cs We will create a simple public method to retrieve the footballers. The code for the class follows public class DALfootballer     {         FootballerDBContext ctx = new FootballerDBContext();         public List<Footballer> GetFootballers()         {             var query = from player in ctx.Footballers where player.FirstName=="Jamie" select player;             return query.ToList();         }     }   10) Place a GridView control on the Default.aspx page and leave the default name.Add an ObjectDataSource control on the Default.aspx page and leave the default name. Set the DatasourceID property of the GridView control to the ID of the ObjectDataSource control.(DataSourceID="ObjectDataSource1" ). Let's configure the ObjectDataSource control. Click on the smart tag item of the ObjectDataSource control and select Configure Data Source. In the Wizzard that pops up select the DALFootballer class and then in the next step choose the GetFootballers() method.Click Finish to complete the steps of the wizzard. Build your application.  11)  Let's create an Insert method in order to insert data into the tables. I will create an Insert() method and for simplicity reasons I will place it in the Default.aspx.cs file. private void Insert()        {            var footballers = new List<Footballer>            {                new Footballer {                                 FirstName = "Steven",LastName="Gerrard", Height=1.85, Weight=85,Age=32, JoinedTheClub=DateTime.Parse("12/12/1999"),Positions=FootballPositions.Midfielder,                Trainings = new List<Training>                             {                                     new Training {TrainingDuration = 3, TrainingLocation="MelWood"},                    new Training {TrainingDuration = 2, TrainingLocation="Anfield"},                    new Training {TrainingDuration = 2, TrainingLocation="MelWood"},                }                            },                            new Footballer {                                  FirstName = "Jamie",LastName="Garragher", Height=1.89, Weight=89,Age=34, JoinedTheClub=DateTime.Parse("12/02/2000"),Positions=FootballPositions.Defender,                Trainings = new List<Training>                                             {                                 new Training {TrainingDuration = 3, TrainingLocation="MelWood"},                new Training {TrainingDuration = 5, TrainingLocation="Anfield"},                new Training {TrainingDuration = 6, TrainingLocation="Anfield"},                }                           }                    };            footballers.ForEach(foot => ctx.Footballers.Add(foot));            ctx.SaveChanges();        }   12) In the Page_Load() event handling routine I called the Insert() method.        protected void Page_Load(object sender, EventArgs e)        {                   Insert();                }  13) Run your application and you will see that the following result,hopefully. You can see clearly that the data is returned along with the enum value.  14) You must have also a look at the database.Launch SSMS and see the database and its objects (data) created from EF Code First.Have a look at the picture below. Hopefully now you have seen the support that exists in EF 5.0 for enums.Hope it helps !!!

    Read the article

  • How can I transfer output that appears on the console and format it so that it appears on a web page

    - by lojayna
    package collabsoft.backlog_reports.c4; import java.sql.CallableStatement; import java.sql.Connection; import java.sql.DriverManager; import java.sql.ResultSet; import java.sql.ResultSetMetaData; import java.sql.Statement; //import collabsoft.backlog_reports.c4.Report; public class Report { private Connection con; public Report(){ connectUsingJDBC(); } public static void main(String args[]){ Report dc = new Report(); dc.reviewMeeting(6, 8, 10); dc.createReport("dede",100); //dc.viewReport(100); // dc.custRent(3344,123,22,11-11-2009); } /** the following method is used to connect to the database **/ public void connectUsingJDBC() { // This is the name of the ODBC data source String dataSourceName = "Simple_DB"; try { // loading the driver in the memory Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); // This is the connection URL String dbURL = "jdbc:odbc:" + dataSourceName; con = DriverManager.getConnection("jdbc:mysql://localhost:3306/Collabsoft","root",""); // This line is used to print the name of the driver and it would throw an exception if a problem occured System.out.println("User connected using driver: " + con.getMetaData().getDriverName()); //Addcustomer(con,1111,"aaa","aaa","aa","aam","111","2222","111"); //rentedMovies(con); //executePreparedStatement(con); //executeCallableStatement(con); //executeBatch(con); } catch (Exception e) { e.printStackTrace(); } } /** *this code is to link the SQL code with the java for the task *as an admin I should be able to create a report of a review meeting including notes, tasks and users *i will take the task id and user id and note id that will be needed to be added in the review *meeting report and i will display the information related to these ida **/ public void reviewMeeting(int taskID, int userID, int noteID)// law el proc bt return table { try{ CallableStatement callableStatement = con.prepareCall("{CALL report_review_meeting(?,?,?)}"); callableStatement.setInt(1,taskID); callableStatement.setInt(2,userID); callableStatement.setInt(3,noteID); ResultSet resultSet = callableStatement.executeQuery(); // or executeupdate() or updateQuery ResultSetMetaData rsm = resultSet.getMetaData(); int numOfColumns = rsm.getColumnCount(); System.out.println("lojayna"); while (resultSet.next()) { System.out.println("New Row:"); for (int i = 1; i <= numOfColumns; i++) System.out.print(rsm.getColumnName(i) + ": " + resultSet.getObject(i) + " "); System.out.println(); } } catch(Exception e) { System.out.println("E"); } } ////////////////////////////////// ///////////////////////////////// public void allproject(int projID)// law el proc bt return table { try{ CallableStatement callableStatement = con.prepareCall("{CALL all_project(?)}"); callableStatement.setInt(1,projID); //callableStatement.setInt(2,userID); //callableStatement.setInt(3,noteID); ResultSet resultSet = callableStatement.executeQuery(); // or executeupdate() or updateQuery ResultSetMetaData rsm = resultSet.getMetaData(); int numOfColumns = rsm.getColumnCount(); System.out.println("lojayna"); while (resultSet.next()) { System.out.println("New Row:"); for (int i = 1; i <= numOfColumns; i++) System.out.print(rsm.getColumnName(i) + ": " + resultSet.getObject(i) + " "); System.out.println(); } } catch(Exception e) { System.out.println("E"); } } /////////////////////////////// /** * here i take the event id and i take a string report and then * i relate the report with the event **/ public void createReport(String report,int E_ID )// law el proc bt return table { try{ Statement st = con.createStatement(); st.executeUpdate("UPDATE e_vent SET e_vent.report=report WHERE e_vent.E_ID= E_ID;"); /* CallableStatement callableStatement = con.prepareCall("{CALL Create_report(?,?)}"); callableStatement.setString(1,report); callableStatement.setInt(2,E_ID); ResultSet resultSet = callableStatement.executeQuery(); // or executeupdate() or updateQuery ResultSetMetaData rsm = resultSet.getMetaData(); int numOfColumns = rsm.getColumnCount(); System.out.println("lojayna"); while (resultSet.next()) { System.out.println("New Row:"); for (int i = 1; i <= numOfColumns; i++) System.out.print(rsm.getColumnName(i) + ": " + resultSet.getObject(i) + " "); System.out.println(); }*/ } catch(Exception e) { System.out.println("E"); System.out.println(e); } } /** *in the following method i view the report of the event having the ID eventID **/ public void viewReport(int eventID)// law el proc bt return table { try{ CallableStatement callableStatement = con.prepareCall("{CALL view_report(?)}"); callableStatement.setInt(1,eventID); ResultSet resultSet = callableStatement.executeQuery(); // or executeupdate() or updateQuery ResultSetMetaData rsm = resultSet.getMetaData(); int numOfColumns = rsm.getColumnCount(); System.out.println("lojayna"); while (resultSet.next()) { System.out.println("New Row:"); for (int i = 1; i <= numOfColumns; i++) System.out.print(rsm.getColumnName(i) + ": " + resultSet.getObject(i) + " "); System.out.println(); } } catch(Exception e) { System.out.println("E"); } } } // the result of these methods is being showed on the console , i am using WIcket and i want it 2 be showed on the web how is that done ?!

    Read the article

  • Testing Entity Framework applications, pt. 3: NDbUnit

    - by Thomas Weller
    This is the third of a three part series that deals with the issue of faking test data in the context of a legacy app that was built with Microsoft's Entity Framework (EF) on top of an MS SQL Server database – a scenario that can be found very often. Please read the first part for a description of the sample application, a discussion of some general aspects of unit testing in a database context, and of some more specific aspects of the here discussed EF/MSSQL combination. Lately, I wondered how you would ‘mock’ the data layer of a legacy application, when this data layer is made up of an MS Entity Framework (EF) model in combination with a MS SQL Server database. Originally, this question came up in the context of how you could enable higher-level integration tests (automated UI tests, to be exact) for a legacy application that uses this EF/MSSQL combo as its data store mechanism – a not so uncommon scenario. The question sparked my interest, and I decided to dive into it somewhat deeper. What I've found out is, in short, that it's not very easy and straightforward to do it – but it can be done. The two strategies that are best suited to fit the bill involve using either the (commercial) Typemock Isolator tool or the (free) NDbUnit framework. The use of Typemock was discussed in the previous post, this post now will present the NDbUnit approach... NDbUnit is an Apache 2.0-licensed open-source project, and like so many other Nxxx tools and frameworks, it is basically a C#/.NET port of the corresponding Java version (DbUnit namely). In short, it helps you in flexibly managing the state of a database in that it lets you easily perform basic operations (like e.g. Insert, Delete, Refresh, DeleteAll)  against your database and, most notably, lets you feed it with data from external xml files. Let's have a look at how things can be done with the help of this framework. Preparing the test data Compared to Typemock, using NDbUnit implies a totally different approach to meet our testing needs.  So the here described testing scenario requires an instance of an SQL Server database in operation, and it also means that the Entity Framework model that sits on top of this database is completely unaffected. First things first: For its interactions with the database, NDbUnit relies on a .NET Dataset xsd file. See Step 1 of their Quick Start Guide for a description of how to create one. With this prerequisite in place then, the test fixture's setup code could look something like this: [TestFixture, TestsOn(typeof(PersonRepository))] [Metadata("NDbUnit Quickstart URL",           "http://code.google.com/p/ndbunit/wiki/QuickStartGuide")] [Description("Uses the NDbUnit library to provide test data to a local database.")] public class PersonRepositoryFixture {     #region Constants     private const string XmlSchema = @"..\..\TestData\School.xsd";     #endregion // Constants     #region Fields     private SchoolEntities _schoolContext;     private PersonRepository _personRepository;     private INDbUnitTest _database;     #endregion // Fields     #region Setup/TearDown     [FixtureSetUp]     public void FixtureSetUp()     {         var connectionString = ConfigurationManager.ConnectionStrings["School_Test"].ConnectionString;         _database = new SqlDbUnitTest(connectionString);         _database.ReadXmlSchema(XmlSchema);         var entityConnectionStringBuilder = new EntityConnectionStringBuilder         {             Metadata = "res://*/School.csdl|res://*/School.ssdl|res://*/School.msl",             Provider = "System.Data.SqlClient",             ProviderConnectionString = connectionString         };         _schoolContext = new SchoolEntities(entityConnectionStringBuilder.ConnectionString);         _personRepository = new PersonRepository(this._schoolContext);     }     [FixtureTearDown]     public void FixtureTearDown()     {         _database.PerformDbOperation(DbOperationFlag.DeleteAll);         _schoolContext.Dispose();     }     ...  As you can see, there is slightly more fixture setup code involved if your tests are using NDbUnit to provide the test data: Because we're dealing with a physical database instance here, we first need to pick up the test-specific connection string from the test assemblies' App.config, then initialize an NDbUnit helper object with this connection along with the provided xsd file, and also set up the SchoolEntities and the PersonRepository instances accordingly. The _database field (an instance of the INdUnitTest interface) will be our single access point to the underlying database: We use it to perform all the required operations against the data store. To have a flexible mechanism to easily insert data into the database, we can write a helper method like this: private void InsertTestData(params string[] dataFileNames) {     _database.PerformDbOperation(DbOperationFlag.DeleteAll);     if (dataFileNames == null)     {         return;     }     try     {         foreach (string fileName in dataFileNames)         {             if (!File.Exists(fileName))             {                 throw new FileNotFoundException(Path.GetFullPath(fileName));             }             _database.ReadXml(fileName);             _database.PerformDbOperation(DbOperationFlag.InsertIdentity);         }     }     catch     {         _database.PerformDbOperation(DbOperationFlag.DeleteAll);         throw;     } } This lets us easily insert test data from xml files, in any number and in a  controlled order (which is important because we eventually must fulfill referential constraints, or we must account for some other stuff that imposes a specific ordering on data insertion). Again, as with Typemock, I won't go into API details here. - Unfortunately, there isn't too much documentation for NDbUnit anyway, other than the already mentioned Quick Start Guide (and the source code itself, of course) - a not so uncommon problem with smaller Open Source Projects. Last not least, we need to provide the required test data in xml form. A snippet for data from the People table might look like this, for example: <?xml version="1.0" encoding="utf-8" ?> <School xmlns="http://tempuri.org/School.xsd">   <Person>     <PersonID>1</PersonID>     <LastName>Abercrombie</LastName>     <FirstName>Kim</FirstName>     <HireDate>1995-03-11T00:00:00</HireDate>   </Person>   <Person>     <PersonID>2</PersonID>     <LastName>Barzdukas</LastName>     <FirstName>Gytis</FirstName>     <EnrollmentDate>2005-09-01T00:00:00</EnrollmentDate>   </Person>   <Person>     ... You can also have data from various tables in one single xml file, if that's appropriate for you (but beware of the already mentioned ordering issues). It's true that your test assembly may end up with dozens of such xml files, each containing quite a big amount of text data. But because the files are of very low complexity, and with the help of a little bit of Copy/Paste and Excel magic, this appears to be well manageable. Executing some basic tests Here are some of the possible tests that can be written with the above preparations in place: private const string People = @"..\..\TestData\School.People.xml"; ... [Test, MultipleAsserts, TestsOn("PersonRepository.GetNameList")] public void GetNameList_ListOrdering_ReturnsTheExpectedFullNames() {     InsertTestData(People);     List<string> names =         _personRepository.GetNameList(NameOrdering.List);     Assert.Count(34, names);     Assert.AreEqual("Abercrombie, Kim", names.First());     Assert.AreEqual("Zheng, Roger", names.Last()); } [Test, MultipleAsserts, TestsOn("PersonRepository.GetNameList")] [DependsOn("RemovePerson_CalledOnce_DecreasesCountByOne")] public void GetNameList_NormalOrdering_ReturnsTheExpectedFullNames() {     InsertTestData(People);     List<string> names =         _personRepository.GetNameList(NameOrdering.Normal);     Assert.Count(34, names);     Assert.AreEqual("Alexandra Walker", names.First());     Assert.AreEqual("Yan Li", names.Last()); } [Test, TestsOn("PersonRepository.AddPerson")] public void AddPerson_CalledOnce_IncreasesCountByOne() {     InsertTestData(People);     int count = _personRepository.Count;     _personRepository.AddPerson(new Person { FirstName = "Thomas", LastName = "Weller" });     Assert.AreEqual(count + 1, _personRepository.Count); } [Test, TestsOn("PersonRepository.RemovePerson")] public void RemovePerson_CalledOnce_DecreasesCountByOne() {     InsertTestData(People);     int count = _personRepository.Count;     _personRepository.RemovePerson(new Person { PersonID = 33 });     Assert.AreEqual(count - 1, _personRepository.Count); } Not much difference here compared to the corresponding Typemock versions, except that we had to do a bit more preparational work (and also it was harder to get the required knowledge). But this picture changes quite dramatically if we look at some more demanding test cases: Ok, and what if things are becoming somewhat more complex? Tests like the above ones represent the 'easy' scenarios. They may account for the biggest portion of real-world use cases of the application, and they are important to make sure that it is generally sound. But usually, all these nasty little bugs originate from the more complex parts of our code, or they occur when something goes wrong. So, for a testing strategy to be of real practical use, it is especially important to see how easy or difficult it is to mimick a scenario which represents a more complex or exceptional case. The following test, for example, deals with the case that there is some sort of invalid input from the caller: [Test, MultipleAsserts, TestsOn("PersonRepository.GetCourseMembers")] [Row(null, typeof(ArgumentNullException))] [Row("", typeof(ArgumentException))] [Row("NotExistingCourse", typeof(ArgumentException))] public void GetCourseMembers_WithGivenVariousInvalidValues_Throws(string courseTitle, Type expectedInnerExceptionType) {     var exception = Assert.Throws<RepositoryException>(() =>                                 _personRepository.GetCourseMembers(courseTitle));     Assert.IsInstanceOfType(expectedInnerExceptionType, exception.InnerException); } Apparently, this test doesn't need an 'Arrange' part at all (see here for the same test with the Typemock tool). It acts just like any other client code, and all the required business logic comes from the database itself. This doesn't always necessarily mean that there is less complexity, but only that the complexity happens in a different part of your test resources (in the xml files namely, where you sometimes have to spend a lot of effort for carefully preparing the required test data). Another example, which relies on an underlying 1-n relationship, might be this: [Test, MultipleAsserts, TestsOn("PersonRepository.GetCourseMembers")] public void GetCourseMembers_WhenGivenAnExistingCourse_ReturnsListOfStudents() {     InsertTestData(People, Course, Department, StudentGrade);     List<Person> persons = _personRepository.GetCourseMembers("Macroeconomics");     Assert.Count(4, persons);     Assert.ForAll(         persons,         @p => new[] { 10, 11, 12, 14 }.Contains(@p.PersonID),         "Person has none of the expected IDs."); } If you compare this test to its corresponding Typemock version, you immediately see that the test itself is much simpler, easier to read, and thus much more intention-revealing. The complexity here lies hidden behind the call to the InsertTestData() helper method and the content of the used xml files with the test data. And also note that you might have to provide additional data which are not even directly relevant to your test, but are required only to fulfill some integrity needs of the underlying database. Conclusion The first thing to notice when comparing the NDbUnit approach to its Typemock counterpart obviously deals with performance: Of course, NDbUnit is much slower than Typemock. Technically,  it doesn't even make sense to compare the two tools. But practically, it may well play a role and could or could not be an issue, depending on how much tests you have of this kind, how often you run them, and what role they play in your development cycle. Also, because the dataset from the required xsd file must fully match the database schema (even in parts that otherwise wouldn't be relevant to you), it can be quite cumbersome to be in a team where different people are working with the database in parallel. My personal experience is – as already said in the first part – that Typemock gives you a better development experience in a 'dynamic' scenario (when you're working in some kind of TDD-style, you're oftentimes executing the tests from your dev box, and your database schema changes frequently), whereas the NDbUnit approach is a good and solid solution in more 'static' development scenarios (when you need to execute the tests less frequently or only on a separate build server, and/or the underlying database schema can be kept relatively stable), for example some variations of higher-level integration or User-Acceptance tests. But in any case, opening Entity Framework based applications for testing requires a fair amount of resources, planning, and preparational work – it's definitely not the kind of stuff that you would call 'easy to test'. Hopefully, future versions of EF will take testing concerns into account. Otherwise, I don't see too much of a future for the framework in the long run, even though it's quite popular at the moment... The sample solution A sample solution (VS 2010) with the code from this article series is available via my Bitbucket account from here (Bitbucket is a hosting site for Mercurial repositories. The repositories may also be accessed with the Git and Subversion SCMs - consult the documentation for details. In addition, it is possible to download the solution simply as a zipped archive – via the 'get source' button on the very right.). The solution contains some more tests against the PersonRepository class, which are not shown here. Also, it contains database scripts to create and fill the School sample database. To compile and run, the solution expects the Gallio/MbUnit framework to be installed (which is free and can be downloaded from here), the NDbUnit framework (which is also free and can be downloaded from here), and the Typemock Isolator tool (a fully functional 30day-trial is available here). Moreover, you will need an instance of the Microsoft SQL Server DBMS, and you will have to adapt the connection strings in the test projects App.config files accordingly.

    Read the article

  • Adding nodes to MAAS server

    - by Yasith Tharindu
    I was able to install MAAS server using ubuntu 12.04. Then boot up nodes from he PXE. Then installed maas-precise-x86-64-commissioning through pxe. Now the installation is done. but im unable to commission with the MAAS server. It does not show it as a node and neither im unable to add it manually and end up with following error. Also what is the default username password for maas-precise-x86-64-commissioning. Im unable to login. This error when adding node manually. ERROR 2012-11-20 08:32:54,500 maas.maasserver ################################ Exception: timed out ################################ ERROR 2012-11-20 08:32:54,501 maas.maasserver Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/django/core/handlers/base.py", line 111, in get_response response = callback(request, *callback_args, **callback_kwargs) File "/usr/lib/python2.7/dist-packages/django/views/decorators/vary.py", line 22, in inner_func response = func(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/piston/resource.py", line 166, in call result = self.error_handler(e, request, meth, em_format) File "/usr/lib/python2.7/dist-packages/piston/resource.py", line 164, in call result = meth(request, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/maasserver/api.py", line 251, in dispatcher self, request, request.method, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/maasserver/api.py", line 193, in perform_api_operation return method(handler, request, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/maasserver/api.py", line 493, in new node = create_node(request) File "/usr/lib/python2.7/dist-packages/maasserver/api.py", line 418, in create_node return form.save() File "/usr/lib/python2.7/dist-packages/maasserver/forms.py", line 234, in save node = super(NodeWithMACAddressesForm, self).save() File "/usr/lib/python2.7/dist-packages/django/forms/models.py", line 363, in save fail_message, commit, construct=False) File "/usr/lib/python2.7/dist-packages/django/forms/models.py", line 85, in save_instance instance.save() File "/usr/lib/python2.7/dist-packages/maasserver/models.py", line 114, in save return super(CommonInfo, self).save(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/django/db/models/base.py", line 460, in save self.save_base(using=using, force_insert=force_insert, force_update=force_update) File "/usr/lib/python2.7/dist-packages/django/db/models/base.py", line 570, in save_base created=(not record_exists), raw=raw, using=using) File "/usr/lib/python2.7/dist-packages/django/dispatch/dispatcher.py", line 172, in send response = receiver(signal=self, sender=sender, **named) File "/usr/lib/python2.7/dist-packages/maasserver/provisioning.py", line 485, in provision_post_save_Node profile, power_type, preseed_data) File "/usr/lib/python2.7/dist-packages/maasserver/provisioning.py", line 245, in call result = self.method(*args) 259,1 93% result = self.method(*args) File "/usr/lib/python2.7/xmlrpclib.py", line 1224, in call return self._send(self._name, args) File "/usr/lib/python2.7/xmlrpclib.py", line 1578, in _request verbose=self._verbose File "/usr/lib/python2.7/xmlrpclib.py", line 1264, in request return self.single_request(host, handler, request_body, verbose) File "/usr/lib/python2.7/xmlrpclib.py", line 1294, in single_request response = h.getresponse(buffering=True) File "/usr/lib/python2.7/httplib.py", line 1030, in getresponse response.begin() File "/usr/lib/python2.7/httplib.py", line 407, in begin version, status, reason = self._read_status() File "/usr/lib/python2.7/httplib.py", line 365, in _read_status line = self.fp.readline() File "/usr/lib/python2.7/socket.py", line 447, in readline data = self._sock.recv(self._rbufsize) timeout: timed out

    Read the article

  • i want to show the result of my code on a web page because it is being showed on a console??

    - by lojayna
    package collabsoft.backlog_reports.c4; import java.sql.CallableStatement; import java.sql.Connection; import java.sql.DriverManager; import java.sql.ResultSet; import java.sql.ResultSetMetaData; import java.sql.Statement; //import collabsoft.backlog_reports.c4.Report; public class Report { private Connection con; public Report(){ connectUsingJDBC(); } public static void main(String args[]){ Report dc = new Report(); dc.reviewMeeting(6, 8, 10); dc.createReport("dede",100); //dc.viewReport(100); // dc.custRent(3344,123,22,11-11-2009); } /** the following method is used to connect to the database **/ public void connectUsingJDBC() { // This is the name of the ODBC data source String dataSourceName = "Simple_DB"; try { // loading the driver in the memory Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); // This is the connection URL String dbURL = "jdbc:odbc:" + dataSourceName; con = DriverManager.getConnection("jdbc:mysql://localhost:3306/Collabsoft","root",""); // This line is used to print the name of the driver and it would throw an exception if a problem occured System.out.println("User connected using driver: " + con.getMetaData().getDriverName()); //Addcustomer(con,1111,"aaa","aaa","aa","aam","111","2222","111"); //rentedMovies(con); //executePreparedStatement(con); //executeCallableStatement(con); //executeBatch(con); } catch (Exception e) { e.printStackTrace(); } } /** *this code is to link the SQL code with the java for the task *as an admin I should be able to create a report of a review meeting including notes, tasks and users *i will take the task id and user id and note id that will be needed to be added in the review meeting report and i will display the information related to these ida */ public void reviewMeeting(int taskID, int userID, int noteID)// law el proc bt return table { try{ CallableStatement callableStatement = con.prepareCall("{CALL report_review_meeting(?,?,?)}"); callableStatement.setInt(1,taskID); callableStatement.setInt(2,userID); callableStatement.setInt(3,noteID); ResultSet resultSet = callableStatement.executeQuery(); // or executeupdate() or updateQuery ResultSetMetaData rsm = resultSet.getMetaData(); int numOfColumns = rsm.getColumnCount(); System.out.println("lojayna"); while (resultSet.next()) { System.out.println("New Row:"); for (int i = 1; i <= numOfColumns; i++) System.out.print(rsm.getColumnName(i) + ": " + resultSet.getObject(i) + " "); System.out.println(); } } catch(Exception e) { System.out.println("E"); } } ////////////////////////////////// ///////////////////////////////// public void allproject(int projID)// law el proc bt return table { try{ CallableStatement callableStatement = con.prepareCall("{CALL all_project(?)}"); callableStatement.setInt(1,projID); //callableStatement.setInt(2,userID); //callableStatement.setInt(3,noteID); ResultSet resultSet = callableStatement.executeQuery(); // or executeupdate() or updateQuery ResultSetMetaData rsm = resultSet.getMetaData(); int numOfColumns = rsm.getColumnCount(); System.out.println("lojayna"); while (resultSet.next()) { System.out.println("New Row:"); for (int i = 1; i <= numOfColumns; i++) System.out.print(rsm.getColumnName(i) + ": " + resultSet.getObject(i) + " "); System.out.println(); } } catch(Exception e) { System.out.println("E"); } } /////////////////////////////// /** * here i take the event id and i take a string report and then * i relate the report with the event **/ public void createReport(String report,int E_ID )// law el proc bt return table { try{ Statement st = con.createStatement(); st.executeUpdate("UPDATE e_vent SET e_vent.report=report WHERE e_vent.E_ID= E_ID;"); /* CallableStatement callableStatement = con.prepareCall("{CALL Create_report(?,?)}"); callableStatement.setString(1,report); callableStatement.setInt(2,E_ID); ResultSet resultSet = callableStatement.executeQuery(); // or executeupdate() or updateQuery ResultSetMetaData rsm = resultSet.getMetaData(); int numOfColumns = rsm.getColumnCount(); System.out.println("lojayna"); while (resultSet.next()) { System.out.println("New Row:"); for (int i = 1; i <= numOfColumns; i++) System.out.print(rsm.getColumnName(i) + ": " + resultSet.getObject(i) + " "); System.out.println(); }*/ } catch(Exception e) { System.out.println("E"); System.out.println(e); } } /** in the following method i view the report of the event having the ID eventID */ public void viewReport(int eventID)// law el proc bt return table { try{ CallableStatement callableStatement = con.prepareCall("{CALL view_report(?)}"); callableStatement.setInt(1,eventID); ResultSet resultSet = callableStatement.executeQuery(); // or executeupdate() or updateQuery ResultSetMetaData rsm = resultSet.getMetaData(); int numOfColumns = rsm.getColumnCount(); System.out.println("lojayna"); while (resultSet.next()) { System.out.println("New Row:"); for (int i = 1; i <= numOfColumns; i++) System.out.print(rsm.getColumnName(i) + ": " + resultSet.getObject(i) + " "); System.out.println(); } } catch(Exception e) { System.out.println("E"); } } } // the result of these methods is being showed on the console , i am using WIcket and i want it 2 be showed on the web how is that done ?! thnxxx

    Read the article

< Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >